Multiscale Structural Characterizations of Fatty Acid Multilayered Tubes with a Temperature-Tunable Diameter

Design of thermo-responsive self-assembly of PEGylated fatty acids: Switching reversibly from tubes or vesicles to micelles at physiological temperature

HYPOTHESIS

The mixing of end-capped poly(ethylene glycol) (PEG) chains with 12-hydroxy stearic acid (12-HSA) molecules is a simple one-pot strategy to design thermo-responsive PEGylated self-assemblies of fatty acids with various morphology types at room temperature (multi-lamellar tubes or vesicles) that transit reversibly upon heating into small micelles around physiological temperature.

EXPERIMENTAL

4 types of 4k end-capped poly(ethylene glycol) (PEG) chains, capped respectively at one end or at both ends with either 12-HSA or stearic acid (SA), were mixed with 12-hydroxy stearic acid molecules, at a low constant ratio of end capped fatty acid moieties brought by the chains to that of free 12-HSA molecules. The detailed structure of the self-assemblies of mixtures was obtained using Small Angle Neutron Scattering with contrast variation at both 20 °C and 45 °C, and their temperature-dependent rheological behavior was characterized.

FINDINGS

For both types of mono-functionalized PEG, the chains insert homogenously in the multi-lamellar tubes formed by 12-HSA molecules. The mixtures of di-functionalized chains by 12-HSA with 12-HSA molecules produce PEGylated vesicles, since the change of packing parameter induced by insertion of the telechelic chains no longer allows the formation of tubes. Conversely, mixtures of di-functionalized chains by SA with 12-HSA molecules enable to keep multi-lamellar tubes, a specific behavior that likely comes from the fact that they only insert by one end within the 12-HSA bilayers. All systems transit reversibly into small PEGylated ellipsoidal micelles. The morphological transitions enable to tune the rheological properties of suspensions, that are gelled at low temperature and turn Newtonian liquid at around 37 °C.

CO2 induced phase transition on a self-standing droplet studied by X-ray scattering and magnetic resonance

HYPOTHESIS

Acoustic levitation is a suitable approach for studying processes occurring at the gas-liquid interfaces, as it allows its investigation in a contact-free manner while providing control over the gas phase. Here, we hypothesize that phase transitions induced by a CO2 rich atmosphere can be examined, at different length scales, in a contact-free manner.

EXPERIMENTAL

A system consisting of 12-hydroxysteric acid (HSA) soaps mixed with different ratios of monoethanolamine (MEA) and choline hydroxide, was prepared. Microliter droplets of the samples were acoustically levitated and monitored with a camera, while exposed to CO2 to modify the pH through diffusion at the air-liquid interface and inside the droplet. The phase transition and water mobility in the levitated droplets were evaluated through X-ray scattering (SAXS/WAXS) and magnetic resonance studies, in real-time. Finally, the droplets were collected and examined under the microscope.

FINDINGS

The introduction of CO2 gas induced a phase transition from micelles to multi-lamellar tubes, resulting in a gel-like behavior both in the bulk and at the interface. The high stability of the acoustic levitator allowed the investigation of this dynamic phenomenon, in real-time, in a contact-free environment. This study showcases the suitability of acoustic levitation as a tool to investigate complex chemical processes at interfaces.

Self-Assembly of Palmitic Acid in the Presence of Choline Hydroxide

To disperse fatty acids in aqueous solution, choline, a quaternary ammonium ion, has been used recently. So far, only the self-assembly of myristic acid (MA) in the presence of choline hydroxide as a function of the molar ratio has been investigated, and, thus, the current understanding of these fatty acid systems is still limited. We investigated the self-assembly of palmitic acid (PA) in the presence of choline hydroxide (ChOH) as a function of the molar ratio (R) between ChOH and PA. The self-assemblies were characterized by phase contrast microscopy, cryo-TEM, small-angle X-ray scattering, and 2H NMR. The ionization state of PA was determined by pH, conductivity, and FT-IR measurements. With increase in R, various self-assembled structures, including vesicles, lamellar phase, rigid membranes (large sheets, tubules, cones, and polyhedrals), and micelles, form in the PA/ChOH system, different from those of the MA/ChOH system. The change in R induces pH variation and, consequently, a change in the PA ionization state, which, in turn, regulates the molecular interactions, including hydrogen bonding and electrostatic interaction, leading to various self-assemblies. Temperature is an important factor used to tune the self-assembly transitions. The fatty acid choline systems studied here potentially may be applicable in medicine, chemical engineering, and biotechnology.

Aqueous Binary Mixtures of Stearic Acid and Its Hydroxylated Counterpart 12-Hydroxystearic Acid: Fine Tuning of the Lamellar/Micelle Threshold Temperature Transition and of the Micelle Shape

This study examines the structures of soft surfactant-based biomaterials which can be tuned by temperature. More precisely, investigated here is the behavior of stearic acid (SA) and 12-hydroxystearic acid (12-HSA) aqueous mixtures as a function of temperature and the 12-HSA/SA molar ratio (R). Whatever R is, the system exhibits a morphological transition at a given threshold temperature, from multilamellar self-assemblies at low temperature to small micelles at high temperature, as shown by a combination of transmittance measurements, Wide Angle X-ray diffraction (WAXS), small angle neutron scattering (SANS), and differential scanning calorimetry (DSC) experiments. The precise determination of the threshold temperature, which ranges between 20 °C and 50 °C depending on R, allows for the construction of the whole phase diagram of the system as a function of R. At high temperature, the micelles that are formed are oblate for pure SA solutions (R = 0) and prolate for pure 12-HSA solutions (R = 1). In the case of mixtures, there is a progressive continuous transition from oblate to prolate shapes when increasing R, with micelles that are almost purely spherical for R = 0.33.

Aqueous Binary Mixtures of Stearic Acid and Its Hydroxylated Counterpart 12-Hydroxystearic Acid: Cascade of Morphological Transitions at Room Temperature

Here, we describe the behavior of mixtures of stearic acid (SA) and its hydroxylated counterpart 12-hydroxystearic acid (12-HSA) in aqueous mixtures at room temperature as a function of the 12-HSA/SA mole ratio R. The morphologies of the self-assembled aggregates are obtained through a multi-structural approach that combines confocal and cryo-TEM microscopies with small-angle neutron scattering (SANS) and wide-angle X-ray scattering (WAXS) measurements, coupled with rheology measurements. Fatty acids are solubilized by an excess of ethanolamine counterions, so that their heads are negatively charged. A clear trend towards partitioning between the two types of fatty acids is observed, presumably driven by the favorable formation of a H-bond network between hydroxyl OH function on the 12th carbon. For all R, the self-assembled structures are locally lamellar, with bilayers composed of crystallized and strongly interdigitated fatty acids. At high R, multilamellar tubes are formed. The doping via a low amount of SA molecules slightly modifies the dimensions of the tubes and decreases the bilayer rigidity. The solutions have a gel-like behavior. At intermediate R, tubes coexist in solution with helical ribbons. At low R, local partitioning also occurs, and the architecture of the self-assemblies associates the two morphologies of the pure fatty acids systems: they are faceted objects with planar domains enriched in SA molecules, capped with curved domains enriched in 12-HSA molecules. The rigidity of the bilayers is strongly increased, as well their storage modulus. The solutions remain, however, viscous fluids in this regime.

Surfactant-Induced Interfacial Aggregation of Porphyrins for Structuring Color-Tunable Liquids

Locking nonequilibrium shapes of liquids into targeted architectures by interfacial jamming of nanoparticles is an emerging area in material science. 5,10,15,20-tetrakis(4-sulfonatophenyl) porphyrin (H₆ TPPS) shows three different aggregation states that present an absorption imaging platform to monitor the assembly and jamming of supramolecular polymer surfactants (SPSs) at the liquid/liquid interface. The interfacial interconversion of H₆ TPPS, specifically H₄ TPPS^2- dissolved in water, from J- to an H-aggregation was induced by strong electrostatic interactions with amine-terminated polystyrene dissolved in toluene at the water/toluene interface. This resulted in color-tunable liquids due to interfacial jamming of the SPSs formed between H₄ TPPS^2- and amine-terminated polystyrene. However, the formed SPSs cannot lock in nonequilibrium shapes of liquids. In addition, a self-wrinkling behavior was observed when amphiphilic triblock copolymers of PS-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) were used to interact with H₄ TPPS^2- . Subsequently, the SPSs formed can lock in nonequilibrium shapes of liquids.

Effect of the Cationic Head Group on Cationic Surfactant-Based Surfactant Mediated Gelation (SMG)

The surfactant-mediated gelation (SMG) method allows us to formulate hydrogels using a water-insoluble organogelator. In this study, we formulated hydrogels using three cationic surfactants, hexadecyltrimethylammonium bromide (CTAB), hexadecyltrimethylammonium chloride (CTAC), and hexadecylpyridinium chloride (CPC)] and an organogelator (12-hydroxyoctadecanoic acid (12-HOA), and studied their structures and mechanical properties. A fiber-like structure similar to that found in the 12-HOA-based organogels was observed by optical microscopy. Small- and wide-angle X-ray scattering profiles showed Bragg peaks derived from the long- and short-spacing of the crystalline structures in the gel fibers and a correlation peak from the surfactant micelles in the small-angle region. Furthermore, the formation of micelles in the hydrogels was confirmed by UV-vis spectroscopic measurements of the gel samples in the presence of Rhodamine 6G. We concluded that the hydrogels prepared by the SMG method in the present systems are orthogonal molecular assembled systems in which two different molecular assembled structures coexist. Among the three surfactant systems, the CTAB system presented the lowest critical gelation concentration and highest sol-gel transition temperature and viscoelasticity. These differences in gel fiber formation and gel properties were discussed from the viewpoint of the degree of solubilization of the gelator molecules in micelles coexisting with gel fibers and diffusion of the gelator molecules in the gel formation process.

Hydrogelation with a water-insoluble organogelator - surfactant mediated gelation (SMG)

The low-molecular-weight gelator (LMG) 12-hydroxyoctadecanoic acid (12-HOA) is insoluble in water, but can be solubilized in surfactant micelles. We therefore solubilized 12-HOA at 80 °C in an aqueous solution of cetyltrimethylammonium bromide (CTAB) containing spherical micelles. On cooling this system down to room temperature, a hydrogel is obtained. We will refer to this process as "surfactant-mediated gelation" (SMG). The hydrogels were formed at a lower 12-HOA concentration when sodium salicylate (NaSal) was added to the CTAB system, which induced the formation of wormlike micelles. Hydrogels obtained by SMG from spherical and wormlike micelles are referred to as gelled micellar phases (GMs) and gelled wormlike micellar phases (GWLMs), respectively. Optical microscopy and transmission electron microscopy (TEM) showed that 12-HOA forms self-assembled fibrillar networks (SAFiNs) in both GMs and GWLMs. The sol-gel transition temperature, T_sol-gel, of the GWLM samples was higher than that of the GM samples. Dynamic rheological measurements revealed gel properties (G' > G'' at all angular frequencies) for both gels; however, a higher viscoelasticity was observed for the GWLM samples, which in turn, was reflected in the higher T_sol-gel. Small- and wide-angle X-ray scattering (SWAXS) showed that micelles and gel fibers coexist in the GM and GWLM samples. Our study demonstrates the gelation of aqueous micellar solutions with water-insoluble LMGs.

Multilayers formed by polyelectrolyte-surfactant and related mixtures at the air-water interface

The structure and occurrence of multilayered adsorption at the air-water interface of surfactants in combination with other oppositely charged species is reviewed. The main species that trigger multilayer formation are multiply charged metal, oligo- and polyions. The structures vary from the attachment of one or two more or less complete surfactant bilayers to the initial surfactant monolayer at the air-water interface to the attachment of a greater number of bilayers with a more defective structure. The majority of the wide range of observations of such structures have been made using neutron reflectometry. The possible mechanisms for the attraction of surfactant bilayers to an air-water interface are discussed and particular attention is given to the question of whether these structures are true equilibrium structures.

Morphological Transition in Fatty Acid Self-Assemblies: A Process Driven by the Interplay between the Chain-Melting and Surface-Melting Process of the Hydrogen Bonds

In surfactant systems, the major role of the nature of the counterion in the surfactant behavior is well-known. However, the effect of the molar ratio between the surfactant and its counterion is less explored in the literature. We investigated the effect of the molar ratio (R) between 12-hydroxystearic acid (12-HSA) and various alkanolamines as a function of the temperature in aqueous solution from the molecular scale to the mesoscale. By coupling microscopy techniques and small-angle neutron scattering, we showed that 12-HSA self-assembled into multilamellar tubes and transitioned into micelles at a precise temperature. This temperature transition depended on both the molar ratio and the alkyl chain length of the counterion and could be precisely tuned from 20 to 75 °C. This thermal behavior was investigated by differential scanning calorimetry and wide-angle X-ray scattering. We highlighted that the transition at the supramolecular scale between tubes and micelles came from two different mechanisms at the molecular scale as a function of the molar ratio. At low R, with an excess of counterion, the transition came from the chain-melting phenomenon. At high R, with an excess of 12-HSA, the transition came from both the chain-melting process and the surface-melting process of the hydrogen bonds. At the mesoscale, this transition of supramolecular assemblies from tubes to micelles delimited a regime of high bulk viscosity, with a regime of low viscosity.

Micro- and nano-tubules built from loosely and tightly rolled up thin sheets

Tubular structures built from amphiphilic molecules are of interest for nano-sensing, drug delivery, and structuring of oils. In this study, we characterized the tubules built in aqueous suspensions of a cholesteryl nucleoside conjugate, cholesterylaminouridine (CholAU) and phosphatidylcholines (PCs). In mixtures with unsaturated PCs having chain lengths comparable to the length of CholAU, two different types of tubular structures were observed; nano- and micro-tubules had average diameters in the ranges 50-300 nm and 2-3 μm, respectively. Using cryo scanning electron microscopy (cryo-SEM) we found that nano- and micro-tubules differed in their morphology: the nano-tubules were densely packed, whereas micro-tubules consisted of loosely rolled undulated lamellas. Atomic force microscopy (AFM) revealed that the nano-tubules were built from 4 to 5 nm thick CholAU-rich bilayers, which were in the crystalline state. Solid-state (2)H NMR spectroscopy also confirmed that about 25% of the total CholAU, being about the fraction of CholAU composing the tubules, formed the rigid crystalline phase. We found that CholAU/PC tubules can be functionalized by molecules inserted into lipid bilayers and fluorescently labeled PCs and lipophilic nucleic acids inserted spontaneously into the outer layer of the tubules. The tubular structures could be loaded and cross-linked, e.g. by DNA hybrids, and, therefore, are of interest for further development, e.g. as a depot scaffold for tissue regeneration.

A tough self-assembled natural oligomer hydrogel based on nano-size vesicle cohesion

Vesicles made from shellac-COOH similar to asymmetric gemini surfactants could aggregated together to fabricate the network of the shellac hydrogel.

Polymorphic transformation towards formation of nanotubes by self-assembly of an achiral molecule

In this paper, nanotubes with a uniform diameter were prepared by self-assembly of an achiral azobenzene-containing fatty acid. The polymorphic transformation of the assemblies during the cooling process was systematically studied. By controlling the incubation temperature, different morphologies, such as membranes, stripes, helical ribbons and tubes, were all obtained in our experiment. These elements were all predicted by Selinger et al. in the theoretical model of the formation of nanotubes. To the best of our knowledge, this is the first experimental example to fully support their theory.

Temperature- and pH-Dependent Shattering: Insoluble Fatty Ammonium Phosphate Films at Water-Oil Interfaces

We study the films formed by tetradecylamine (TDA) at the water-dodecane interface in the presence of hydrogen phosphate ions. Using Fourier transform infrared spectroscopy (FTIR), interfacial shear rheology, confocal fluorescence microscopy, cryo-scanning electron microscopy (cryo-SEM), and small-angle neutron scattering (SANS), we find that between pH 5 and 8 tetradecylammonium cations bind to hydrogen phosphate anions to form needle-shaped crystallites of tetradecylammonium hydrogen phosphate (TAHP). These crystallites self-assemble into films with a range of morphologies; below pH 7, they form brittle, continuous sheets, and at pH 8, they form lace-like networks that deform plastically under shear. They are also temperature-responsive: when the system is heated, the film thins and its rheological moduli drop. We find that the temperature response is caused by dissolution of the film in to the bulk fluid phases. Finally, we show that these films can be used to stabilize temperature-responsive water-in-oil emulsions with potential applications in controlled release of active molecules.

Self-assembly of a cholesteryl-modified nucleoside into tubular structures from giant unilamellar vesicles

Phosphatidylcholine-assisted self-assembly of cholesterylaminouridine into hollow needle-like structures was observed at room temperature.

Photoresponsive self-assemblies based on fatty acids

Photoresponsive surfactant system based on fatty acids has been developed by the introduction in aqueous solution of a photoacid generator (PAG).

Yielding and flow of solutions of thermoresponsive surfactant tubes: tuning macroscopic rheology by supramolecular assemblies

In this article, we show that stimuli-induced microscopic transformations of self-assembled surfactant structures can be used to tune the macroscopic bulk and interfacial rheological properties. Previously, we had described the formation of micron-sized 12-hydroxystearic acid tubes having a temperature-tunable diameter in the bulk, and also adsorbing at the air-water interface. We report now a detailed study of the bulk and interfacial rheological properties of this solution of thermoresponsive tubes as a function of temperature. In the bulk, the structural modifications of tubes with temperature lead to sharp and non-monotonous changes of rheological behavior. As well, at the air-water interface, the interfacial layer is shifted several times from rigid-like to fluid-like as the temperature is increased, due to morphological changes of the adsorbed interfacial layer. The temperature-induced variations in the fatty acid supramolecular organization and the richness in structural transitions at this microscopic level lead to unique rheological responses in comparison with conventional surfactant systems. Also, this study provides new insights into the required packing conditions for the jamming of anisotropic soft objects and highlights the fact that this system becomes glassy under heating. Due to these unique macroscopic properties both in the bulk and at the interface, this simple system with stimuli-responsive viscoelasticity is of interest for their potential applications in pharmacology or cosmetic formulations.

Self-assembly of fatty acids in the presence of amines and cationic components

Fatty acids can self-assemble under various shapes in the presence of amines or cationic components. We assemble and compare these types of self-assembly leading toward a catanionic system either with a cationic surfactant or with an amine component playing the role of counter-ion. First, we focus on the molar ratio as a key driving parameter. Known and yet un-known values from other quantities governing the colloidal properties of these systems such as structural surface charge, osmotic pressure, molecular segregation, rigidity, in plane colloidal interactions and melting transition are discussed. We include also recent results obtained on the interfacial and foaming properties of these systems. We will highlight the specificity of these self-assemblies leading to unusual macroscopic properties rich of robust applications.

Self-assembly of fatty acids: from foams to protocell vesicles

Stable aqueous dispersions of fatty acids can now be obtained and yield multiple applications.

Foams stabilized by multilamellar polyglycerol ester self-assemblies

The importance of surfactant self-assemblies in foam stabilization is well-known. The aim of the current study was to investigate the self-assemblies of the nonionic surfactant polyglycerol ester (PGE) in bulk solutions, at the interface and within foams, using a combined approach of small-angle neutron scattering, neutron reflectivity, and electron microscopy. PGE bulk solutions contain vesicles as well as open lamellar structures. Upon heating of the solutions the lamellar spacing increases, with significant differences in the presence of NaCl or CaCl(2) as compared to the standard solution. The adsorption of the multilamellar structures present in the bulk solutions lead to a multilayered film at the air-water interface. The ordering within this film was increased as a result of a 20% area compression mimicking a coalescence event. Finally, PGE foams were shown to be stabilized not only by strong interfacial films but also by agglomerated self-assemblies within the interstitial areas of the foams.