Substituent Effect on the Meso-Substituted Porphyrins: Theoretical Screening of Sensitizer Candidates for Dye-Sensitized Solar Cells

Designing Efficient Metal-Free Dye-Sensitized Solar Cells: A Detailed Computational Study

The modulation of molecular characteristics in metal-free organic dyes holds significant importance in dye-sensitized solar cells (DSSCs). The D-π-A molecular design, based on the furan moiety (π) in the conjugated spacer between the arylamine (D) and the 2-cyanoacrylic acid (A), was developed and theoretically evaluated for its potential application in DSSCs. Utilizing linear response time-dependent density functional theory (TDDFT) with the CAM-B3LYP functional, different donor and acceptor groups were characterized in terms of the electronic absorption properties of these dyes. All the studied dye sensitizers demonstrate the ability to inject electrons into the semiconductor's conduction band (TiO2) and undergo regeneration through the redox potential triiodide/iodide (I3-/I-) electrode. TDDFT results indicate that the dyes with CSSH anchoring groups exhibit improved optoelectronic properties compared to other dyes. Further, the photophysical properties of all dyes absorbed on a Ti(OH)4 model were explored and reported. The observed results indicate that bidentate chemisorption occurs between dyes and TiO4H5. Furthermore, the HOMO-LUMO energy gaps for almost all dye complexes are significantly smaller than those of the free dyes. This decrease of the HOMO-LUMO energy gaps in the dye complexes facilitates electron excitation, and thus more photons can be adsorbed, guaranteeing larger values of efficiency and short-circuit current density.

Model systems for dye-sensitized solar cells: cyanidin-silver nanocluster hybrids at TiO2 support

Theoretical study of structural, optical, and photovoltaic properties of novel bio-nano hybrids (dye-nanocluster), as well as at TiO2 surface model support is presented in the context of the application for dye-sensitized solar cells (DSSC). A group of anthocyanidin dyes (pelargonidin, cyanidin, delphinidin, peonidin, petunidin, and malvidin) represented by cyanidin covalently bound to silver nanoclusters (NCs) with even or odd number of valence electrons have been investigated using DFT and TDDFT approach. The key role of nanoclusters as acceptors in hybrids cyanidin-NC has been shown. The nanoclusters with an even number of valence electrons are suitable as acceptors in hybrids. The interaction of bio-nano (cyanidin-NC) hybrid with the TiO2 surface model has been investigated in the context of absorption in near-infrared (NIR) and charge separation due to donor and acceptor subunits. Altogether, the theoretical concept serves to identify the key steps in the design of novel solar cells based on bio-nano hybrids at TiO2 surface for DSSC application.

Computational investigation on the geometry and electronic structures and absorption spectra of metal-porphyrin-oligo- phenyleneethynylenes-[60] fullerene triads

In this work, we focus our attention on the influence of 2nd-row transition metals on the structural geometries, electronic structures, and absorption characteristics of porphyrin linked with the C₆₀ fullerene with oligo-p-phenyleneethynylenes (MP-C₆₀-oligo-PPEs) compounds. The DFT/B3PW91-D3 and CAM-B3LYP-D3/6-31G (d) calculations revealed that various metals embedded within the porphyrin moiety give different bridge conformations and different HOMO-LUMO energy levels. We calculate the UV-Vis spectra and absorption parameters using the time-dependent ZINDO/S approach. Our findings indicate that all the compounds have enhanced absorptions in the visible light range, and their molecular orbital energies adopt the condition of sensitizers. However, all of the complexes except down spin states exhibit considerably charge spatial separation. The results suggest that the ZnP-C₆₀-oligo-PPEs triad can meet the necessary conditions of the sensitizer of dye-sensitized solar cells (DSSCs) in comparison with other counterparts and could be an optimum triad compound for potential application in photovoltaic devices.

Spectroscopic investigation of the electronic and excited state properties of para-substituted tetraphenyl porphyrins and their electrochemically generated ions

Porphyrins play pivotal roles in many crucial biological processes including photosynthesis. However, there is still a knowledge gap in understanding electronic and excited state implications associated with functionalization of the porphyrin ring system. These effects can have electrochemical and spectroscopic signatures that reveal the complex nature of these somewhat minor substitutions, beyond simple inductive or electronic effect correlations. To obtain a deeper insight into the influences of porphyrin functionalization, four free-base, meso-substituted porphyrins: tetraphenyl porphyrin (TPP), tetra(4-hydroxyphenyl) porphyrin (THPP), tetra(4-carboxyphenyl) porphyrin (TCPP), and tetra(4-nitrophenyl) porphyrin (TNPP), were synthesized, characterized, and investigated. The influence of various substituents, (-hydroxy,-carboxy, and -nitro) in the para position of the meso-substituted phenyl moieties were evaluated by spectroelectrochemical techniques (absorption and fluorescence), femtosecond transient absorption spectroscopy, cyclic and differential pulse voltammetry, ultraviolet photoelectron spectroscopy (UPS), and time-dependent density functional theory (TD-DFT). Spectral features were evaluated for the neutral porphyrins and differences observed among the various porphyrins were further explained using rendered frontier molecular orbitals pertaining to the relevant transitions. Electrochemically generated anionic and cationic porphyrin species indicate similar absorbance spectroscopic signatures attributed to a red-shift in the Soret band. Emissive behavior reveals the emergence of one new fluorescence decay pathway for the ionic porphyrin, distinct from the neutral macrocycle. Femtosecond transient absorption spectroscopy analysis provided further analysis of the implications on the excited-state as a function of the para substituent of the free-base meso-substituted tetraphenyl porphyrins. Herein, we provide an in-depth and comprehensive analysis of the electronic and excited state effects associated with systematically varying the induced dipole at the methine bridge of the free-base porphyrin macrocycle and the spectroscopic signatures related to the neutral, anionic, and cationic species of these porphyrins.

Chirogenesis in Zinc Porphyrins: Theoretical Evaluation of Electronic Transitions, Controlling Structural Factors and Axial Ligation

In the present work, sixteen different zinc porphyrins (possessing different meso substituents) with and without a chiral guest were modelled using DFT and TD-DFT approaches in order to understand the influence of various controlling factors on electronic circular dichroism (ECD) spectra. Two major aspects are influenced by these factors: excitation energy of the electronic transitions and their intensity. In the case of excitation energy, the influence increases in the following order: orientation of the peripheral substituents Collapse

Key Words

• circular dichroism
• density functional calculations
• porphyrins
• supramolecular chemistry
• transition metals

Collapse

MESH Headings Collapse

Grants

• PUTJD749 Estonian Research Council
• PRG399 Estonian Research Council
• 828779 European Union's H2020-FETOPEN
• Estonian Research Council

Collapse

Affiliation(s)

Irina Osadchuk Department of Chemistry and BiotechnologySchool of ScienceTallinn University of Technology AddressAkadeemia tee 1512618TallinnEstonia ICGMUniv MontpellierCNRS, ENSCMMontpellierFrance
Riina Aav Department of Chemistry and BiotechnologySchool of ScienceTallinn University of Technology AddressAkadeemia tee 1512618TallinnEstonia
Victor Borovkov Department of Chemistry and BiotechnologySchool of ScienceTallinn University of Technology AddressAkadeemia tee 1512618TallinnEstonia
Eric Clot ICGMUniv MontpellierCNRS, ENSCMMontpellierFrance

Collapse

The effect of group-substitution on the sensitization properties of alkynylrhenium(I) tricarbonyl diimine complexes adsorbed to TiO2(101) film surface: a theoretical study

A series of dyes are designed by adding the different electron-donating (-CH₃, -NH₂, -OH) and electron-withdrawing groups (-Br, -Cl, -NO₂) to the different ancillary ligands in the alkynylrhenium(I) tricarbonyl diimine complexes [Re(CO)₃(N^N){C≡C-C₆H₄-CH=C(CN)(COOH)}], where N^N = 1,10-phenanthroline (phen)(1) and then investigated the sensitization properties of dyes linked to the TiO₂(101) surface. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) were used to study the electronic structure, frontier molecular orbitals, and absorption spectral properties. The effect of group-substitution on sensitization properties is obvious. When the dye molecules are combined with TiO₂(101) surface, not only the absorptions of some sensitizers containing -CH₃ or -OH groups have red shift but also the electrons can be directly injected into the TiO₂ conduction band from the dye molecules compared with the parent molecular 1. The results indicate that the designed dyes containing electron-donating groups have smaller energy gaps, better light-harvesting efficiency, sufficient driving force, and higher charge transfer efficiency as appropriate dye sensitizers. We hope it can provide valuable hints so that we can design more efficient dye sensitizers in DSSCs.

Unraveling substituent effects on frontier orbitals of conjugated molecules using an absolutely localized molecular orbital based analysis

It is common to introduce electron-donating or electron-withdrawing substituent groups into functional conjugated molecules (such as dyes) to tune their electronic structure properties (such as frontier orbital energy levels) and photophysical properties (such as absorption and emission wavelengths). However, there lacks a generally applicable tool that can unravel the underlying interactions between orbitals from a substrate molecule and those from its substituents in modern electronic structure calculations, despite the long history of qualitative molecular orbital theory. In this work, the absolutely localized molecular orbitals (ALMO) based analysis is extended to analyze the effects of substituent groups on the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of a given system. This provides a bottom-up avenue towards quantification of effects from distinct physical origins (e.g. permanent electrostatics/Pauli repulsion, mutual polarization, inter-fragment orbital mixing). For the example case of prodan (a typical dye molecule), it is found that inter-fragment orbital mixing plays a key role in narrowing the HOMO-LUMO gap of the naphthalene core. Specifically, an out-of-phase mixing of high-lying occupied orbitals on the naphthalene core and the dimethylamino group leads to an elevated HOMO, whereas an in-phase combination of LUMOs on the naphthalene core and the propionyl group lowers the LUMO energy of the entire molecule. We expect this ALMO-based analysis to bridge the gap between concepts from qualitative orbital interaction analysis and quantitative electronic structure calculations.

Effects of the terminal donor unit in dyes with D-D-π-A architecture on the regeneration mechanism in DSSCs: a computational study

This theoretical study on dye-sensitized solar cells (DSSCs) includes design strategies for dye donor units to improve the efficiency of DSSCs, and further illuminates the organic dye regeneration mechanism. We have designed a series of new organic sensitizers based on a D-D-π-A architecture to exhibit easy electron transfer and to have remarkable light harvesting properties in the visible region by density functional theory (DFT) and time-dependent (TD)-DFT calculations. Furthermore, the interaction of the organic sensitizers with the conventional redox electrolyte using the triiodide/iodide couple (I3-/I-) is investigated. Our calculations indicate that incorporation of strong electron-donating groups remarkably improves the charge transfer characteristics, optoelectronic properties and rapid dye regeneration as compared to less electron donating substituents. In addition, our study demonstrates the possibility of second electron injection from the oxidized dye complex to the semiconductor surface, which further confirms our recently proposed dye regeneration mechanism.

Designing Push-Pull Porphyrins for Efficient Dye-Sensitized Solar Cells

Over the past decade, tremendous effort has been made to improve the light-harvesting ability of push-pull porphyrin dyes. Despite notable success achieved in this direction, push-pull porphyrin dyes still suffer from a poor light-harvesting efficiency owing to the lack of absorption between the Soret and Q-bands. To tackle this issue, here we design a series of push-pull porphyrin dyes with anchoring groups either at meso- or β-position using calculations based on first-principles time-dependent density functional theory. In contrast to the common perception, we find that porphyrin dyes bearing an electron-donor at the meso-position and an electron-acceptor at the β-position produce an additional extended band between the Soret and Q-bands appearing at around 500 nm due to S₀ → S₃ excitation, leading to a much higher light-harvesting performances compared to meso- and β-disubstituted ones. In addition, changing the π-conjugated linker at the acceptor site from ethylene linker (C═C) to acetylene linker (C≡C) further improves the light-harvesting ability of meso-β-porphyrin dyes, making them promising candidates for dye-sensitized solar cell application.

Computational and Spectroscopic Analysis of β-Indandione Modified Zinc Porphyrins

Porphyrins have characteristic optical properties which give them the potential to be used in a range of applications. In this study, a series of β-indandione modified zinc porphyrins, systematically changed in terms of linker length and substituent, resulted in absorption spectra that are dramatically different than that observed for the parent zinc porphyrin (ZnTXP, 5,10,15,20-tetrakis(3,5-dimethylphenyl)porphyrinato zinc(II)). These changes include strong absorptions at 420, 541, and 681 nm (110.2, 57.5, and 29.2 mM^-1 cm^-1, respectively) for the most perturbed compound. Computational studies were conducted and showed the different optical effects are due to a reorganization of molecular orbitals (MOs) away from Gouterman's four-orbital model. The substituent effects alter both unoccupied and occupied MOs. An increased length of linker group raised the energy of the HOMO-2 such that it plays a significant role in the observed transitions. The degenerate LUMO (e_g) set are split by substitution, and this splitting may be increased by use of a propylidenodinitrile group, which shows the lowest-energy transitions and the greatest spectral perturbation from the parent zinc porphyrin complex. These data are supported by resonance Raman spectroscopy studies which show distinct enhancement of phenyl modes for high-energy transitions and indandione modes for lower-energy transitions.

DFT/TD-semiempirical study on the structural and electronic properties and absorption spectra of supramolecular fullerene-porphyrine-metalloporphyrine triads based dye-sensitized solar cells

In the present work density functional theory (DFT) and time-dependent semiempirical ZNIDO/S (TD-ZNIDO/S) methods have been used to investigate the ground state geometries, electronic structures and excited state properties of triad systems. The influences of the type of metal in the porphyrin ring, change in bridge position and porphyrine-ZnP duplicate on the energies of frontier molecular orbital and UV-Vis spectra has been studied. Geometry optimization, the energy levels and electron density of the Highest Occupied Molecular Orbital (HOMO) and the Lowest Unoccupied Molecular Orbital (LUMO), chemical hardness (η), electrophilicity index (ω), electron accepting power (ω⁺) were calculated using ZINDO/S method to predict which molecule is the most efficient with a great capability to be used as a triad molecule in solar industry. Moreover the light harvesting efficiency (LHE) was calculated by means of the oscillator strengths which are obtained by TD-ZINDO/S calculation. Theoretical studies of the electronic spectra by ZINDO/S method were helpful in interpreting the observed electronic transitions. This aspect was systematically explored in a series of C₆₀-Porphyrine-Metalloporphyrine (C₆₀-P-Mp) triad system with M being Fe, Co, Ni, Ti, and Zn. Generally, transition metal coordination compounds are used as effective sensitizers, due to their intense charge-transfer absorption over the whole visible range and highly efficient metal-to-ligand charge transfer. We aim to optimize the performance of the title solar cells by altering the frontier orbital energy gaps. The results reveal that cell efficiency can be enhanced by metal functionalization of the free base porphyrin. Ti-porphyrin was found to be the most efficient dye sensitizer for dye sensitized solar cells (DSSCs) based on C₆₀-P-Mptriad system due to C₆₀-Por-TiP complex has lower chemical hardness, gap energy and chemical potential as well as higher electron accepting power among other complexes. In addition, the performance of solar cells favors better with doubly and increasing the π conjugated of the bridge.

Metal-Phosphate Bilayers for Anatase Surface Modification

Compared to many other metal oxides, anatase TiO₂ shows relatively lower reactivity toward carboxylic acid anchor groups. The latter is crucial for applications, for example, in dye-sensitized solar cells (DSSCs), where the most used dyes bind to the metal oxide surface through carboxylic acid terminations. To improve the surface reactivity, metal-phosphate bilayers of Ni or Co were synthesized on anatase TiO₂ compact oxide and nanotubes. In both cases, time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS) results showed that the bilayers were successfully formed and that the phosphate layer works as an intermediate between TiO₂ and the other species. ToF-SIMS depth profiles of modified nanotubes showed that Ni and Co are present through the whole tube length and reduce in content after heat treatment, in agreement with XPS results. Phosphate groups, on the other hand, are more present in the tubes' depth, and their content on the surface is reduced upon exposure to temperature. The reactivity of the modified surfaces toward carboxylic acid-terminated molecules, as stearic acid and Ru-based N719 dye, was evaluated. Contact angle measurements together with dye desorption experiments demonstrated that the Co-phosphate bilayers heat-treated at 300 °C resulted in the largest enhancement compared to the reference. Bilayer-modified compact anatase TiO₂ and anatase TiO₂ nanotubes were utilized as photoanodes in DSSCs. An increase in efficiency was observed for all modified electrodes with phosphate-Co treatment, leading to the highest J_SC values and an efficiency improvement of 48%.

Theoretical design of porphyrin sensitizers with different acceptors for application in dye-sensitized solar cells

Using density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods, three porphyrin dyes with different acceptors, such as carboxylic acid, cyanoacrylic acid, and 2-cyano-N-hydroxyacrylamide, have been designed. Compared to the best sensitizer (YD2-o-C8) so far, these designed dyes have small highest occupied orbital to lowest unoccupied orbital (HOMO–LUMO) band gaps, and wide absorptions with large oscillator strength at porphyrin Q bands. And the designed Dye1 is similar to YD2-o-C8 in electronic coupling with TiO₂, while improved Dye2 and Dye3 are better than YD2-o-C8, thus, Dye2 and Dye3 will be much faster for electron injection in dye-sensitized solar cell systems based on their long-term stable and efficient anchor groups. All these features show that our designed dyes, especially Dye2 and Dye3, have better absorption performance and faster electron injection. In addition, our results point out that 2-cyano-N-hydroxyacrylamide is a new promising acceptor. This study is expected to assist the molecular design of new efficient dyes for the advancement of dye-sensitized solar cells.

Using density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods, three porphyrin dyes with different acceptors, such as carboxylic acid, cyanoacrylic acid, and 2-cyano-N-hydroxyacrylamide, have been designed.

First principles study of organic sensitizers for dye sensitized solar cells: effects of anchoring groups on optoelectronic properties and dye aggregation

Efficient organic sensitizers with improved spectral properties and less aggregation have been proposed for practical DSSCs based on theoretical calculations.

Triphenylamine-based indoline derivatives for dye-sensitized solar cells: a density functional theory investigation

A new series of triphenylamine-based indoline dye sensitizers were molecularly designed and investigated for their potential use in dye-sensitized solar cells (DSSCs). Theoretical calculations revealed that modifying donor part of D149 by triphenylamine significantly altered the electronic structures, MO energies, and intramolecular charge transfer (ICT) absorption band. Key parameters associated with the light-harvesting efficiency at a given wavelength LHE(λ), the driving force ΔG inject, and the open-circuit photovoltage V oc were characterized. More importantly, these designed (dimeric) dye sensitizers were found to have similar broad absorption spectra to their corresponding monomers, indicating that modifying the donor part with triphenylamine may stop unfavorable dye aggregation. Further analyses of the dye-(TiO2)9 cluster interaction confirmed that there was strong electronic coupling at the interface. These results are expected to provide useful guidance in the molecular design of new highly efficient metal-free organic dyes.

The Role of Porphyrin-Free-Base in the Electronic Structures and Related Properties of N-Fused Carbazole-Zinc Porphyrin Dye Sensitizers

Dye sensitizers can significantly affect power conversion efficiency of dye-sensitized solar cells (DSSCs). Porphyrin-based dyes are promising sensitizers due to their performances in DSSCs. Here, based upon a N-fused carbazole-zinc porphyrin-free-base porphyrin triad containing an ethynyl-linkage (coded as DTBC), the novel porphyrin dyes named DTBC-MP and DTBC-TP were designed by varying the porphyrin-free-base units in the π conjugation of DTBC in order to study the effect of porphyrin-free-base in the modification of electronic structures and related properties. The calculated results indicate that, the extension of the conjugate bridge with the porphyrin-free-base unit results in elevation of the highest occupied molecular orbital (HOMO) energies, decrease of the lowest unoccupied molecular orbital (LUMO) energies, reduction of the HOMO-LUMO gap, red-shift of the absorption bands, and enhancement of the absorbance. The free energy changes demonstrate that introducing more porphyrin-free-base units in the conjugate bridge induces a faster rate of electron injection. The transition properties and molecular orbital characters suggest that the different transition properties might lead to a different electron injection mechanism. In terms of electronic structure, absorption spectra, light harvesting capability, and free energy changes, the designed DTBC-TP is a promising candidate dye sensitizer for DSSCs.

A polydiacetylene–nested porphyrin conjugate for dye-sensitized solar cells

A novel polydiacetylene–nested porphyrin photosensitizer was prepared and explored for its potential in dye-sensitized solar cells.

The effect of porphyrins suspended with different electronegative moieties on the photovoltaic performance of monolithic porphyrin-sensitized solar cells with carbon counter electrodes

Compared with WH-C3 and WH-C4, the WH-C5-sensitized device shows a significantly enhanced V_oc, J_sc and power conversion efficiency (η).

Theoretical screening of novel alkyne bridged zinc porphyrins as sensitizer candidates for dye-sensitized solar cells

Alkyne bridged porphyrin sensitizers have attracted great attention in the field of dye-sensitized solar cells (DSSCs) because of their excellent photo-to-electric conversion efficiencies, among which YD2 has reached 11% while YD2-o-C8 has reached 11.9% solely and 12.3% co-sensitized with other sensitizers. Design and screening of porphyrin sensitizer candidates with wider electronic absorption spectra to further improve the photo-to-electric conversion efficiencies of corresponding solar cells is still very important. Twenty novel alkyne bridged zinc porphyrin sensitizer candidates composed of the donors diarylamino-, tri-4-methylphenyl-, tri-hydroxyl- and tri-amino-substituted zinc porphyrins as well as the selected acceptors E, M, Q, R and S have been designed and calculated at the density functional B3LYP level. YD2 and YD2-o-C8 are also calculated at the same level for comparison. The result shows that the sensitizer candidates all have smaller HOMO-LUMO gaps as well as wider and red-shifted absorption bands than those of YD2 and YD2-o-C8. Most of the sensitizer candidates have appropriate HOMO and LUMO energy levels relative to the redox potential of the mediator and the TiO2 conduction band, showing that they are promising to provide comparable or even higher photo-to-electric conversion efficiencies than 11% of YD-2 or 11.9% of YD2-o-C8.

TD-DFT calculations of the excited states of metalloporphyrins relevant to organic solar photovoltaic cells

The molecular orbital energies and symmetries, electronic state energies and symmetries, and orbital compositions and oscillator strengths for one-photon radiative transitions up to an energy of 4 eV have been calculated by DFT and TD-DFT methods for 15 d0 and d10 metalloporphyrins. Data for both singlet and triplet excited states are reported and used to identify potential candidates for use as photon upconverters by homomolecular triplet–triplet annihilation.

Theoretical study on molecular design and optical properties of organic sensitizers

A series of organic sensitizers based on different configurations such as D-π-A, D-[π]n-A, D-π-[A]n, [D]n-π-A, D-π-A-π-D, D-π-[A]n-π-D and D-[π-A]n-π-D (where n = 1-4) are designed using theoretical methods. The effects of repeating π-linker, donor-acceptor moieties and the substitution of additional donor-acceptor moieties on the optoelectronic properties have been addressed. Our results show that the strength of the acceptor units changes the mono band absorption into dual band absorption in all the considered strategies. We found that repeating π-linker/donor moieties in the D-π-A series enhances the intensity of the absorption and can tune their absorption spectra from UV-to-visible and visible to near IR regions by repeating acceptor units. Also, the present results indicate that the D-π-A-π-D configuration shows improved optical properties than the conventional D-π-A structure. This theoretical study explores the new configurations and design strategies of organic dyes for developing efficient light harvesting devices working in the whole visible and near IR regions.

Theoretical design and screening of alkyne bridged triphenyl zinc porphyrins as sensitizer candidates for dye-sensitized solar cells

Alkyne bridged porphyrins have been proved very promising sensitizers for dye-sensitized solar cells (DSSCs) with the highest photo-to-electric conversion efficiencies of 11.9% solely and 12.3% co-sensitized with other sensitizers achieved. Developing better porphyrin sensitizers with wider electronic absorption spectra to further improve the efficiencies of corresponding solar cells is still of great significance for the application of DSSCs. A series of triphenyl zinc porphyrins (ZnTriPP) differing in the nature of a pendant acceptor group and the conjugated bridge between the porphyrin nucleus and the acceptor unit were modeled and their electronic and spectral properties calculated using density functional theory. As compared with each other and the experimental results of the compounds used in DSSCs previously, the molecules with a relatively longer conjugative linker and a strong electron-withdrawing group such as cyanide adjacent to the carboxyl acid group seem to provide wider electronic absorption spectra and higher photo-to-electric conversion efficiencies. The dye candidates ZnTriPPE, ZnTriPPM, ZnTriPPQ, ZnTriPPR and ZnTriPPS designed in the current work were found promising to provide comparable photo-to-electric conversion efficiencies to the record 11.9% of the alkyne bridged porphyrin sensitizer YD2-o-C8 reported previously.

Theoretical study on the light harvesting efficiency of zinc porphyrin sensitizers for DSSCs

DFT and TDDFT calculations have been carried out to investigate the effect of donor and acceptor groups on the electronic properties of zinc-porphyrin sensitizers. The calculated results show that increasing the electron releasing strength of a meso-donor group opposite to a meso substituted acceptor group increases the light harvesting efficiency and short circuit current density.

Theoretical investigation of the charge-transfer properties in different meso-linked zinc porphyrins for highly efficient dye-sensitized solar cells

In an attempt to improve the photoinduced intramolecular-charge transfer ability of a meso-linked zinc porphyrin by introducing CN to the anchoring group.