In Situ Scanning Tunneling Microscopy of Ordering Processes of Adsorbed Porphyrin on Iodine-Modified Ag(111)

A Molecular Drone for Atomic-Scale Fabrication Working under Ambient Conditions

The direct manipulation of individual atoms has led to the advancement of exciting cutting-edge technologies in sub-nanometric fabrication, information storage and to the exploration of quantum technologies. Atom manipulation is currently performed by scanning probe microscopy (SPM), which enables an extraordinary spatial control, but provides a low throughput, requiring complex critical experimental conditions and advanced instrumentation. Here, a new paradigm is demonstrated for surface atom manipulation that overcomes the limitations of SPM techniques by replacing the SPM probe with a coordination compound that exploits surface atom complexation as a tool for atomic-scale fabrication. The coordination compound works as a "molecular drone": it lands onto a substrate, bonds to a specific atom on the surface, picks it up, and then leaves the surface along with the extracted atom, thus creating an atomic vacancy in a specific position on the surface. Remarkably, the feasibility of the process is demonstrated under electrochemical control and the stability of the fabricated pattern at room temperature, under ambient conditions.

Potential Driven Non-Reactive Phase Transitions of Ordered Porphyrin Molecules on Iodine-Modified Au(100): An Electrochemical Scanning Tunneling Microscopy (EC-STM) Study

The modelling of long-range ordered nanostructures is still a major issue for the scientific community. In this work, the self-assembly of redox-active tetra(N-methyl-4-pyridyl)-porphyrin cations (H2TMPyP) on an iodine-modified Au(100) electrode surface has been studied by means of Cyclic Voltammetry (CV) and in-situ Electrochemical Scanning Tunneling Microscopy (EC-STM) with submolecular resolution. While the CV measurements enable conclusions about the charge state of the organic species, in particular, the potentio-dynamic in situ STM results provide new insights into the self-assembly phenomena at the solid-liquid interface. In this work, we concentrate on the regime of positive electrode potentials in which the adsorbed molecules are not reduced yet. In this potential regime, the spontaneous adsorption of the H2TMPyP molecules on the anion precovered surface yields the formation of up to five different potential-dependent long-range ordered porphyrin phases. Potentio-dynamic STM measurements, as a function of the applied electrode potential, show that the existing ordered phases are the result of a combination of van der Waals and electrostatic interactions.

Reversible potential-induced switching of alkyl chain aggregation in octyl-triazatriangulenium adlayers on Au(111)

In situ scanning tunneling microscopy and cyclic voltammetry studies of self-assembled octyl-triazatriangulenium monolayers on Au(111) electrode surfaces in 0.1 M HClO4 reveal a complex surface phase behavior, involving two fast, highly reversible transitions between different ordered adlayer phases: With decreasing potential, the preadsorbed (√19 × √19)R23.4° adlayer first is converted into a (7√3 × 7√3) and then into a (2√3 × 2√3)R30° phase, corresponding to a stepwise increase in the local packing density of the molecules. The (7√3 × 7√3) → (2√3 × 2√3)R30° transition is accompanied by a reorientation of the peripheral octyl chains from a more planar to a close-packed vertical arrangement. This reversible potential-induced switching between a homogeneous adlayer of small vertical extension and a Au surface partially covered by islands of a compact hydrocarbon layer is attributed to changes in the adsorbate charge state and associated changes in the intermolecular interactions.

Molecular self-assembly at metal-electrolyte interfaces

The self-assembly of molecular layers has become an important strategy in modern design of functional materials. However, in particular, large organic molecules may no longer be sufficiently volatile to be deposited by vapor deposition. In this case, deposition from solution may be a promising route; in ionic form, these molecules may even be soluble in water. In this contribution, we present and discuss results on the electrochemical deposition of viologen- and porphyrin molecules as well as their co-adsorption on chloride modified Cu(100) and Cu(111) single crystal electrode surfaces from aqueous acidic solutions. Using in situ techniques like cyclic voltametry and high resolution scanning tunneling microscopy, as well as ex-situ photoelectron spectroscopy data the highly ordered self-assembled organic layers are characterized with respect to their electrochemical behavior, lateral order and inner conformation as well as phase transitions thereof as a function of their redox-state and the symmetry of the substrate. As a result, detailed structure models are derived and are discussed in terms of the prevailing interactions.

Adsorption and assembly of ions and organic molecules at electrochemical interfaces: nanoscale aspects

We describe the history of electrochemical scanning tunneling microscopy (STM) and advances made in this field during the past 20 years. In situ STM allows one to monitor various electrode processes, such as the underpotential deposition of copper and silver ions; the specific adsorption of iodine and sulfate/bisulfate ions; electrochemical dissolution processes of silicon and gold single-crystal surfaces in electrolyte solutions; and the molecular assembly of metalloporphyrins, metallophthalocyanines, and fullerenes, at atomic and/or molecular resolution. Furthermore, a laser confocal microscope, combined with a differential interference contrast microscope, enables investigation of the dynamics of electrochemical processes at atomic resolution.

Advances in supramolecularly assembled nanostructures of fullerenes and porphyrins at surfaces

The ‘bottom-up’ strategy is an attractive and promising approach for the construction of nanoarchitectures. Supramolecular assemblies based on non-covalent interactions have been explored in an attempt to control surface properties. In this minireview, we focus on advances made in the past three years in the field of scanning tunneling microscopy (STM) on supramolecular assembly and the function of porphyrins, phthalocyanines, and fullerenes, non-covalently bound on metal single crystal surfaces. Well-defined adlayers, consisting of porphyrin and phthalocyanine for the design of supramolecular nanoarchitectures, supramolecular traps of C 60 on hydrogen bond networks, a unique approach for controlling molecular orientation by a 1:1 supramolecularly assembled film consisting of C 60 and the related derivatives and metallooctaethylporphyrins, and nanoapplications of fullerenes, either induced by tip manipulation or driven by thermal fluctuations at surfaces, were clearly visualized by STM.

Bromine-passivated Au(111) as a platform for the formation of organic self-assembled monolayers under electrochemical conditions

Self-assembled monolayers of 5,10,15,20-tetra(4-pyridyl)porphyrin (TPyP) were formed by equilibrium adsorption from a perchloric acid solution onto Au(111) using an interposed adlayer of bromide. The passivating bromide adlayer was generated by addition of 150 microM KBr to the electrochemical cell and allowed monolayer ordering at positive potentials where a disordered TPyP monolayer would be found on a bare Au(111) surface. The TPyP monolayers were characterized in situ with electrochemical scanning tunneling microscopy (EC-STM) and cyclic voltammetry. They were successfully observed at working electrode potentials between 0.0 and +1.3 V vs Ag/AgCl. This wide potential window of usability for the bromide adlayer extends to potentials more positive than what has been achieved for similar observations using iodide-modified Au(111). Within the TPyP monolayers, isolated domains with differing geometries could be distinguished, suggesting dynamic monolayer rearrangements. These results demonstrate that the presence of a passivating bromide adlayer is conducive to the formation of highly ordered organic monolayers. Indeed, bromide is not only one of the few anions that are suitable for this purpose, but it may be superior to the more frequently used iodide.

Highly ordered C60 monolayer self-assembled by using an iodine template on an Au(111) surface in solution

An iodine-modified Au(111) surface, (I/Au(111)), was used as a substrate to prepare a C 60 adlayer by self-organization in a benzene solution. A highly ordered C 60 adlayer was successfully prepared due to the moderate C 60-I/Au(111) interaction. Two lattice structures, (2 square root 3 x 2 square root 3) R30 degrees and p(2 x 2), were imaged for this C 60 adlayer. For the first structure, a featureless ball-like molecular shape was imaged, ascribed to the molecular rotation resulting from a symmetrical location between C 60 and iodine atoms. For the p(2 x 2) structure, the asymmetrical location of C 60 with respect to the iodine atoms freezes the C 60 molecules on the substrate, leading to a clear image of intramolecular structure. The intermediate iodine atoms in the C 60/I/Au(111) adlayer can be desorbed by electrochemically reduction without significantly affecting the ordering of the C 60 adlayer. However, the internal pattern of C 60 disappears in the absence of iodine.

Challenges and breakthroughs in recent research on self-assembly

The controlled fabrication of nanometer-scale objects is without doubt one of the central issues in current science and technology. However, existing fabrication techniques suffer from several disadvantages including size-restrictions and a general paucity of applicable materials. Because of this, the development of alternative approaches based on supramolecular self-assembly processes is anticipated as a breakthrough methodology. This review article aims to comprehensively summarize the salient aspects of self-assembly through the introduction of the recent challenges and breakthroughs in three categories: (i) types of self-assembly in bulk media; (ii) types of components for self-assembly in bulk media; and (iii) self-assembly at interfaces.

Adlayer structure of octa-alkoxy-substituted copper(II) phthalocyanine on Au(111) by electrochemical scanning tunneling microscopy

Electrochemical scanning tunneling microscopy (ECSTM) has been used to examine the adlayer of octa-alkoxy-substituted copper(II) phthalocyanines (CuPc(OC(8)H(17))(8)) on Au(111) in 0.1 M HClO(4), where the molecular adlayer was prepared by spontaneous adsorption from a benzene solution containing this molecule. Topography STM scans revealed long-range ordered, interweaved arrays of CuPc(OC(8)H(17))(8) with coexistent rectangular and hexagonal symmetries. High-quality STM molecular resolution yielded the internal molecular structure and the orientation of CuPc(OC(8)H(17))(8) admolecules. These STM results could shed insight into the method of generating ordered molecular assemblies of phthalocyanine molecules with long-chained substitutes on metal surface.

Electrochemical control of the structure of two-dimensional supramolecular organization consisting of phthalocyanine and porphyrin on a gold single-crystal surface

Two-component adlayers consisting of cobalt(II) phthalocyanine (CoPc) and a metalloporphyrin such as 5,10,15,20-tetraphenyl-21H,23H-porphine copper(II) (CuTPP), 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine copper(II) (CuOEP), or 5,10,15,20-tetraphenyl-21H,23H-porphine cobalt(II) (CoTPP) were prepared by immersing either an Au(111) or Au(100) substrate in a benzene solution containing those molecules. The mixed adlayers thus prepared were investigated in 0.1 M HClO4 by cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM). The composition of the mixed adlayer consisting of CoPc and CuTPP molecules was found to vary with immersion time. CoPc molecules displaced CuTPP molecules during the modification process with increasing immersion time, and the CuTPP molecules were completely displaced by CoPc molecules in the mixed solution after a prolonged modification time, during which the underlying Au(100) substrate underwent phase transition from the reconstructed (hex) lattice to the unreconstructed (1 x 1) lattice. The two-component adlayer of CoPc and CuTPP was found to form a supramolecular adlayer with the constituent molecules arranged alternately on Au(100)-(hex). The striped structure was stable on Au(100)-(hex) at or near the open circuit potential (OCP), whereas the mixed adlayer was disordered on Au(100)-(1 x 1) at potentials more positive than OCP, where the phase transition of the arrangement of underlying Au atoms (i.e., the lifting of reconstruction) was induced electrochemically. A similar two-component supramolecular adlayer consisting of CoPc and CuTPP was formed on Au(111). A highly ordered, compositionally disordered adlayer of CoTPP and CuTPP was formed on Au(100)-(hex), suggesting that the adlayer structure is independent of the coordinated central metal ion for the formation of supramolecular nanostructures composed of those molecules. A supramolecular organization of CoPc and CuOEP was also found on Au(111). The surface mobility and the molecular reorganization of CoPc and CuOEP on Au(111) were tuned by modulation of the electrode potential. It is concluded that molecular assemblies of the two-component structure consisting of phthalocyanine and porphyrin were controlled not only by the crystallographic orientation of Au but also by the modulation of electrochemical potential.

A scanning tunneling microscopy study of self-assembled nickel(II) octaethylporphyrin deposited from solutions on HOPG

The adsorption of nickel(II) octaethylporphyrin (NiOEP) from benzene and chloroform solutions on highly ordered pyrolytic graphite (HOPG) was investigated with a scanning tunneling microscope (STM) operated in ambient conditions. STM images show that NiOEP self-assembles on the graphite surface and that the molecules lie flat and form 2D lattices with spacings of 1.58 +/- 0.03 nm by 1.46 +/- 0.06 nm with a lattice angle of 69 degrees +/- 4 degrees averaged over both solvents. We were unable to eliminate the possibility that one unit cell distance is twice the above-reported distance. The corresponding molecular packing density, 4.5 +/- 0.3 x 10(13) molecules/cm(2), was essentially the same for benzene and chloroform solution deposition. These results differ somewhat from the structure revealed by high-resolution STM images of NiOEP on Au (111). The lack of apparent height (image intensity) in the constant current STM image of the alkane region of alkane-substituted metal porphyrins is attributed to a combination of changes in alkane configuration relative to the ring and associated changes in electronic coupling with HOMO and LUMO.

Self-assembly and conformation of tetrapyridyl-porphyrin molecules on Ag(111)

We present a low-temperature scanning tunneling microscopy (STM) study on the supramolecular ordering of tetrapyridyl-porphyrin (TPyP) molecules on Ag(111). Vapor deposition in a wide substrate temperature range reveals that TPyP molecules easily diffuse and self-assemble into large, highly ordered chiral domains. We identify two mirror-symmetric unit cells, each containing two differently oriented molecules. From an analysis of the respective arrangement it is concluded that lateral intermolecular interactions control the packing of the layer, while its orientation is induced by the coupling to the substrate. This finding is corroborated by molecular mechanics calculations. High-resolution STM images recorded at 15 K allow a direct identification of intramolecular features. This makes it possible to determine the molecular conformation of TPyP on Ag(111). The pyridyl groups are alternately rotated out of the porphyrin plane by an angle of 60 degrees.

Adsorption and Electrochemical Activity: An In Situ Electrochemical Scanning Tunneling Microscopy Study of Electrode Reactions and Potential-Induced Adsorption of Porphyrins

The effect of adsorption on molecular properties and reactivity is a central topic in interfacial physical chemistry. At electrochemical interfaces, adsorbed molecules may lose their electrochemical activity. The absence of in situ probes has hindered our understanding of this phenomenon and electrode reactions in general. In this work, classical electrochemistry and electrochemical scanning tunneling microscopy (EC-STM) were combined to provide molecular level insight into electrochemical reactions and the molecular adsorption state at the electrolyte-electrode interface. The metal-free porphyrin 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) adsorbed on Au(111) in 0.1 M H(2)SO(4) solution was chosen as a model system. TPyP is found to irreversibly adsorb on Au(111) over a wide range of potentials, from -0.25 to 0.6 V(SCE). The adsorption state of TPyP has a dramatic effect on its electrochemistry. Preadsorbed, oxidized TPyP displays no well-defined cathodic peaks in cyclic voltammograms in sharp contrast to solution-phase TPyP. Our present work provides direct, molecular level evidence of the electrochemically "invisible" species. Electrochemical activity of absorbed species is recovered by allowing the oxidized molecule sufficient time (tens of minutes) to reduce. The redox state of adsorbed TPyP also affects the nature of the adsorption. Oxidized species can apparently only form monolayers. However, multilayers, stable enough to be imaged by STM, can form when the adsorbed TPyP is in the reduced state. This suggests that by controlling the electrochemistry one can either promote or suppress the formation of multilayers.

Synthesis of Chiral Self-Assembling Rhombs and Their Characterization in Solution, in the Gas Phase, and at the Liquid−Solid Interface

Chiral, enantiopure metallo-supramolecular rhombs self-assemble in solution through coordination of bis-pyridyl-substituted ligands with (en)M(NO3)2 (en = ethylenediamine, M = Pd(II), Pt(II)). Characterization by NMR and CD spectroscopy in solution and by ESI-FT-ICR mass spectrometry in the gas phase suggests that an equilibrium exists in water/methanol of a major 2:2 complex and a minor 3:3 complex of ligands and metal corners. In the gas phase, doubly charged 2:2 complexes fragment into two identical singly charged halves followed by metal-mediated C-H and C-C bond activation reactions within the ethylenediamine ligands. Electrochemical scanning tunneling microscopy (EC-STM) provides in situ imaging of the complexes even with submolecular resolution. Flat-lying rhombs are deposited under potential control from an aqueous electrolyte on a Cu(100) electrode surface precovered by a tetragonal pattern of chloride anions from the supporting electrolyte. Chirality induces the formation of only one domain orientation. Density functional calculations help to interpret the STM images.

Unequal-Sphere Packing Model for Simulation of the Uniaxially Compressed Iodine Adlayer on Au(111)

A simple unequal-sphere packing (USP) model, based on pure geometrical principles, was applied to study the centered-rectangular iodine c(px radical3)R30 degrees adlayer on the Au(111) surface, well-known from surface X-ray structure (SXS), low energy electron diffraction (LEED), and scanning tunneling microscopy (STM) experiments. To reproduce the exact patterns observed in experiments, two selective conditions-minimum average adsorbate height and minimum adlayer roughness-were imposed. As a result, a series of adlayer patterns with c(px radical3)R30 degrees symmetry (2.3 < p < 3), with precise structural details, including atomic registry and identification of the p-bisector as the most likely trajectory for the iodine adatom movement during the so-called uniaxial compression phenomenon, were identified. In addition, using the same model, the difference between the iodine adlayer arranged in hexagonal and centered-rectangular c(px radical3)R30 degrees patterns, as in the case of Pt(111) and Au(111) surfaces, was investigated. Qualitative and quantitative comparison shows that iodine adatoms in these two arrangements differ significantly in atomic registry, distance from the substrate, and the adlayer corrugation. Our findings could be of special interest in the study of the nature of the iodine adatom bonding to different substrates (i.e., Au vs Pt).

Formation of supramolecular cavitands on copper electrode surfaces

The adsorption of 1,1'-dibenzyl-4,4'-bipyridinium molecules (dibenzyl-viologen or DBV(2+) for the sake of simplicity) on chloride precovered Cu(100) has been studied in an electrochemical environment by means of cyclic voltammetry and in situ scanning tunneling microscopy. DBV(2+) spontaneously forms a highly ordered phase on the chloride c(2 x 2) adlayer at potentials close to the onset of the copper dissolution reaction when the pure supporting electrolyte (10 mM HCl/5 mM KCl) is exchanged by one also containing DBV(2+). This ordered phase can be described by a ( radical 53 x radical 53)R15.9 degrees unit cell relating the organic adlayer to the chloride c(2 x 2) structure underneath or alternatively by a ( radical 106 x radical 106)R29.05 degrees unit cell relating the organic layer to the Cu(1 x 1) substrate structure. Thus, the negatively charged chloride layer acts as a template for the adsorption and phase formation of DBV(2+). Compared to the copper-chloride interaction, the DBV(2+)-chloride interaction appears to be weaker since the organic layer can be easily removed from the surface by the tunneling tip when drastic tunneling conditions (low bias voltage, high tunneling current) are applied. A key structural element of the DBV(2+) adlayer is an assembly of four individual DBV(2+) molecules forming square-shaped supramolecular units with pronounced cavities in their center. Characteristically, the supramolecular assemblies reveal a preferential rotational orientation resulting in the appearance of two chiral forms of these assemblies. Furthermore, these two chiral supramolecular assemblies occur in two mirrored domains of the ( radical 53 x radical 53)R15.9 degrees structure. It can be assumed that these viologen-based supramolecular architectures can be used as potential host cavitands for the inclusion of smaller organic molecules.

Scanning tunneling and atomic force microscopy probes of self-assembled, physisorbed monolayers: peeking at the peaks

The imaging and control of self-assembled, physisorbed monolayers have been the subject of numerous scanning tunneling microscopy and atomic force microscopy investigations. The successful interpretation of the structures observed in scanning probe images of molecules self-assembled at liquid-solid and gas-solid interfaces has benefited greatly from recent experimental and theoretical work. These studies are converging on a general tunneling mechanism that accounts for the images of weakly bound, insulating adsorbates. Experiments in which the dynamical behavior of these monolayers has been monitored as a function of time both statically and after the introduction of an external perturbation are described, and novel studies of the selective control of monolayer structure that make use of internal and external electric fields, photons, and solvent coadsorption are reviewed.

Comparison of nanotube structures constructed from alpha-, beta-, and gamma-cyclodextrins by potential-controlled adsorption

"Nanotube" structures of the alpha-, beta-, and gamma-cyclodextrins (CyD's), which are similar to that of CyD-polyrotaxane, were constructed by potential-controlled adsorption onto Au(111) surfaces in sodium perchlorate solution without a threaded polymer. CyD molecules adsorbed randomly on bare Au(111) surfaces without potential control and the desorption of CyD's from Au surfaces was observed at a negative potential of less than -0.60 V versus SCE. On the other hand, in the specific range between these potentials, ordered molecular arrays with "nanotube" structures of the CyD's (alpha-, beta-, and gamma-CyD) were observed on Au(111). The range of potentials for formation of the "nanotube" structures of alpha-, beta-, and gamma-CyD was from -0.15 to -0.20 V, from -0.25 to -0.45 V, and from -0.22 to -0.45 V, respectively. beta- and gamma-CyD require a more negative potential for adsorption-induced self-organization (AISO) than alpha-CyD in order to weaken adsorption and induce self-organization. Furthermore, we have succeeded in the visualization of the dynamic process in solution, such as the self-ordering, and the destruction of the nanotube structure. These results indicate that control of the electrode potential facilitates management of the delicate balance of various interactions, resulting in the formation of two-dimensional supramolecular structures on the substrates.

Porphyrin self-assembly at electrochemical interfaces: role of potential modulated surface mobility

The self-assembly of 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) on Au(111) electrodes was investigated. The adlayer structure was found to depend on the electrode potential. At positive potentials (>0.5V(SCE)), a disordered layer of TPyP is formed on the Au(111) electrode. STM images showed that the disordered molecules are immobile. At negative potentials (-0.2V(SCE)), however, the molecules are highly mobile and can no longer be imaged by STM, though they remain on the surface. At intermediate potentials (-0.2 to +0.2V(SCE)), the TPyP formed a highly ordered adlayer. Once the ordered adlayer is formed, it persists even after the potential is stepped to higher values (0.5-0.8 V(SCE)). These results can be explained by the role of potential modulated adsorbate-substrate interaction and surface mobility. This suggests the intriguing prospect of using electrode potential to tune surface interactions and to drive surface processes, e.g., molecular self-assembly, in electrochemical systems.

Scanning tunneling microscopy, orbital-mediated tunneling spectroscopy, and ultraviolet photoelectron spectroscopy of metal(II) tetraphenylporphyrins deposited from vapor

Thin films of vapor-deposited Ni(II) and Co(II) complexes of tetraphenylporphyrin (NiTPP and CoTPP) were studied supported on gold and embedded in Al-Al(2)O(3)-MTPP-Pb tunnel diodes, where M = Ni or Co. Thin films deposited onto polycrystalline gold were analyzed by ultraviolet photoelectron spectroscopy (UPS) using He I radiation. Scanning tunneling microscopy (STM) and orbital-mediated tunneling spectroscopy (STM-OMTS) were performed on submonolayer films of CoTPP and NiTPP supported on Au(111). Inelastic electron tunneling spectroscopy (IETS) and OMTS were measured in conventional tunnel diode structures. The highest occupied pi molecular orbital of the porphyrin ring was seen in both STM-OMTS and UPS at about 6.4 eV below the vacuum level. The lowest unoccupied pi molecular orbital of the porphyrin ring was observed by STM-OMTS and by IETS-OMTS to be located near 3.4 eV below the vacuum level. The OMTS spectra of CoTPP had a band near 5.2 eV (below the vacuum level) that was attributed to transient oxidation of the central Co(II) ion. That is, it is due to electron OMT via the half-filled d(z)(2) orbital present in Co(II) of CoTPP. The NiTPP OMTS spectra show no such band, consistent with the known difficulty of oxidation of the Ni(II) ion. The STM-based OMTS allowed these two porphyrin complexes to be easily distinguished. The present work is the first report of the observation of STM-OMTS, tunnel junction OMTS, and UPS of the same compounds. Scanning tunneling microscope-based orbital-mediated tunneling provides more information than UPS or tunnel junction-based OMTS and does so with molecular-scale resolution.

Effect of zeolite properties on ground-state and triplet-triplet absorption, prompt and oxygen induced delayed fluorescence of tetraphenylporphyrin at gas/solid interface

The ground-state and transient absorption, prompt and delayed fluorescence of tetraphenylporphyrin (TPP) adsorbed onto the external surface of different zeolites was monitored using diffuse-reflectance steady-state and laser flash photolysis. The delayed fluorescence (DF) of TPP detected in the presence of O2 is attributed to the energy transfer from 3TPP to 3O2 to form 1O2 and subsequent energy transfer from 1O2 to some other 3TPP within the organised molecular ensembles on the zeolite surface. The spectroscopic and kinetic parameters, namely the yield of DF (2-20% relative to prompt fluorescence), depend on the zeolite properties: the observed differences were correlated with the acid-base properties of the two zeolite series studied in this work (KA, NaA, CaA) and (NaA, NaX, NaY).