Alloy Formation of Gold−Silver Nanoparticles and the Dependence of the Plasmon Absorption on Their Composition

Embedding plasmonic nanoparticles in soft crystals: an approach exploiting CTAB-I structures

Embedding nanoparticles with different functionalities into soft substrates is a convenient tool to realize technologically significant multifunctional materials. This study focuses on incorporating bimetallic plasmonic nanoparticles into soft crystals made of cetyltrimethylammonium bromide-iodide. We observed the emergence of a novel symmetry-lowered cetrimonium crystal polymorph that enables the realization of strong interparticle plasmonic coupling in these composite materials. The observed crystal polymorph exhibits a triclinic structure with significantly reduced unit cell volume compared to standard CTAB. Solid-state nuclear magnetic resonance studies revealed an enhanced cetrimonium chain rigidity and a commensurate decrease in the mobility of the methyl groups. This is attributed to iodide incorporation. To study the influence of these interactions on solution phase dynamical properties, we employed light scattering measurements using gold nanospheres as markers, where we observed aggregation of these particles. We then develop a two step synthetic scheme that successfully enables high levels (533 particles per μm2) of incorporation of bimetallic plasmonic particles into the emergent crystal polymorph.

Highly efficient and reusable CuAu nanoparticles supported on crosslinked chitosan hydrogels as a plasmonic catalyst for nitroarene reduction

The synthesis of CuAu-based monometallic (MNPs) and bimetallic nanoparticles (BNPs) supported on chitosan-based hydrogels for their application as catalysts is presented. The hydrogels consisted of chitosan chains cross-linked with tripolyphosphate (TPP) in the form of beads with an approximate average diameter of 1.81 mm. The MNPs and BNPs were obtained by the adsorption of metallic ions and their subsequent reduction with hydrazine, achieving a metallic loading of 0.297 mmol per gram of dry sample, with average nanoparticle sizes that were found between 2.6 and 4.4 nm. Both processes, metal adsorption and the stabilization of the nanoparticles, are mainly attributed to the participation of chitosan hydroxyl, amine and amide functional groups. The materials revealed important absorption bands in the visible region of the light spectra, specifically between 520 and 590 nm, mainly attributed to LSPR given the nature of the MNPs and BNPs inside the hydrogels. Subsequently, the hydrogels were evaluated as catalysts against the reduction of 4-nitrophenol (4NP) into 4-aminophenol (4AP), followed by UV-visible spectroscopy. The kinetic advance of the reaction revealed important improvements in the catalytic activity of the materials by synergistic effect of BNPs and plasmonic enhancement under visible light irradiation, given the combination of metals and the light harvesting properties of the nanocomposites. Finally, the catalytic performance of hydrogels containing BNPs CuAu 3:1 showed an important selectivity, recyclability and reusability performance, due to the relevant interaction of the BNPs with the chitosan matrix, highlighting the potential of this nanocomposite as an effective catalyst, with a potential environmental application.

Hydroxyethylcellulose-Directed Synthesis of Gold Microplates with Hydrogen Peroxide in an Aqueous Phase

In this study, we successfully synthesized well-defined polygonal gold microplates for the first time in an aqueous phase using hydroxyethylcellulose (HEC) in the presence of hydrogen peroxide (H2O2). HEC played a pivotal role during the synthesis, acting not only as a biotemplate but also as an in situ reduction site for the nucleation and growth of gold (Au) microplates. H2O2 played a crucial role in accelerating the growth of Au microplates from the Au nucleus. This methodology is ecofriendly and easy to operate and has potential applications in various fields, such as electronics, photonics, and biotechnology.

Targeted color design of silver-gold alloy nanoparticles

This research article focuses on the targeted color design of silver-gold alloy nanoparticles (NPs), employing a multivariate optimization approach. NP synthesis involves interconnected process parameters, making independent variation challenging. Data-based property-process relationships are established to optimize optical properties effectively. We define a color target, employ a green chemical co-reduction method at room temperature and optimize process parameters accordingly. The CIEL*a*b* color space (Commission Internationale de l'Éclairage - International Commission on Illumination) and Euclidean distances facilitate accurate color matching to establish the property-process relationship. Concurrently, theoretical Mie calculations explore the structure-property relationship across particle sizes, concentrations, and molar gold contents. The theoretically optimal structure agrees very well with experimental particle structures at the property-process relationship's optimum. The data-driven property-process relationship provides valuable insights into the formation mechanism of a complex particle system, sheds light on the role of relevant process parameters and allows to evaluate the practically available property space. Model validation beyond the original grid demonstrates its robustness, yielding colors close to the target. Additionally, Design of Experiments (DoE) methods reduce experimental work by threefold with slight accuracy trade-offs. Our novel methodology for targeted color design demonstrates how data-based methods can be utilized alongside structure-property relationships to unravel property-process relationships in the design of complex nanoparticle systems and paves the way for future developments in targeted property design.

Graphene materials in pollution trace detection and environmental improvement

Water scarcity is a pressing issue experienced in numerous countries and is expected to become increasingly critical in the future. Anthropogenic activities such as mining, agriculture, industries, and domestic waste discharge toxic contaminants into natural water bodies, causing pollution. Addressing these environmental crises requires tackling the challenge of removing pollutants from water. Graphene oxide (GO), a form of graphene functionalized with oxygen-containing chemical groups, has recently garnered renewed interest due to its exceptional properties. These properties include a large surface area, mechanical stability, and adjustable electrical and optical characteristics. Additionally, surface functional groups like hydroxyl, epoxy, and carboxyl groups make GO an outstanding candidate for interacting with other materials or molecules. Because of its expanded structural diversity and enhanced overall properties, GO and its composites hold significant promise for a wide range of applications in energy storage, conversion, and environmental protection. These applications encompass hydrogen storage materials, photocatalysts for water splitting, the removal of air pollutants, and water purification. Serving as electrode materials for various lithium batteries and supercapacitors. Graphene-based materials, including graphene, graphene oxide, reduced graphene oxide, graphene polymer nanocomposites, and graphene nanoparticle metal hybrids, have emerged as valuable tools in energy and environmental remediation technologies. This review article provides an overview of the significant impact of graphene-based materials in various areas. Regarding energy-related topics, this article explores the applications of graphene-based materials in supercapacitors, lithium-ion batteries, and catalysts for fuel cells. Additionally, the article investigates recent advancements in detecting and treating persistent organic pollutants (POPs) and heavy metals using nanomaterials. The article also discusses recent developments in creating innovative nanomaterials, nanostructures, and treatment methods for addressing POPs and heavy metals in water. It aims to present the field's current state and will be a valuable resource for individuals interested in nanomaterials and related materials.

Sensitization Strategies of Lateral Flow Immunochromatography for Gold Modified Nanomaterials in Biosensor Development

Gold nanomaterials have become very attractive nanomaterials for biomedical research due to their unique physical and chemical properties, including size dependent optical, magnetic and catalytic properties, surface plasmon resonance (SPR), biological affinity and structural suitability. The performance of biosensing and biodiagnosis can be significantly improved in sensitivity, specificity, speed, contrast, resolution and so on by utilizing multiple optical properties of different gold nanostructures. Lateral flow immunochromatographic assay (LFIA) based on gold nanoparticles (GNPs) has the advantages of simple, fast operation, stable technology, and low cost, making it one of the most widely used in vitro diagnostics (IVDs). However, the traditional colloidal gold (CG)-based LFIA can only achieve qualitative or semi-quantitative detection, and its low detection sensitivity cannot meet the current detection needs. Due to the strong dependence of the optical properties of gold nanomaterials on their shape and surface properties, gold-based nanomaterial modification has brought new possibilities to the IVDs: people have attempted to change the morphology and size of gold nanomaterials themselves or hybrid with other elements for application in LFIA. In this paper, many well-designed plasmonic gold nanostructures for further improving the sensitivity and signal output stability of LFIA have been summarized. In addition, some opportunities and challenges that gold-based LFIA may encounter at present or in the future are also mentioned in this paper. In summary, this paper will demonstrate some feasible strategies for the manufacture of potential gold-based nanobiosensors of post of care testing (POCT) for faster detection and more accurate disease diagnosis.

Detection of SARS-CoV-2 S protein based on FRET between carbon quantum dots and gold nanoparticles

The COVID-19 pandemic caused by SARS-CoV-2 virus brings nasty crisis for public health in the world. Until now, the virus has caused multiple infections in many people. Detecting antigen to SARS-CoV-2 is a powerful method for the diagnosis of COVID-19 and is helpful for controlling and stopping the pandemic. Herein, a rapid and quantitative detection method of SARS-CoV-2 spike(S) protein was built based on the fluorescence resonance energy transfer (FRET) phenomenon without complicated steps. In the process of detecting, the carbon quantum dots (CQDs) and gold nanoparticles (AuNPs) act as donor and acceptor. By modifying the SARS-CoV-2 antibodies on the surface of CQDs and AuNPs, we achieved S protein specific detection using the distance-based FRET phenomenon. Through the electric charge regulation, the limit of detection (LOD) is 0.05 ng/mL, the linear range is 0.1-100 ng/mL, and the detection process only takes 12 min. The proposed method exhibits several advantages such as be available for variants (B.1.1.529 and B.1.617.2) and be suitable for human serum, which is of significance for detecting viral in time and prevention the viral transmission.

Element-ratio dependence of the 5d-states of Au and Pt in solid-solution-type Au-Pt alloy nanoparticles studied by X-ray absorption spectroscopy and density functional theory

Solid-solution-type Au-Pt alloy nanoparticles (NPs) were prepared from the nanoclusters of each metal using the polymer-conjugated fusion growth method. The elemental mapping analysis showed that the mixing state of the elements in the NPs drastically changed in the narrow reaction-temperature range from 100 °C to 180 °C. For their various mixing states, the 5d-states of Au and Pt atoms in the alloy NPs were investigated on the basis of the white line intensities of X-ray absorption near edge structure (XANES). Then, the 5d-states of Au and Pt atoms in a model crystalline ordered alloy structures were investigated on the basis of the theoretically calculated XANES spectra using density functional theory (DFT) in the whole composition range. The DFT calculation showed that the changes in the absorption spectra near the Pt and Au edges are caused by the change in the occupation of the Pt 5d-states and the orbital hybridisation of the Au 5d-states with the 5d-states of neighbouring Pt atoms around an Au atom, respectively.

Silver-Gold Alloy Nanoparticles (AgAu NPs): Photochemical Synthesis of Novel Biocompatible, Bimetallic Alloy Nanoparticles and Study of Their In Vitro Peroxidase Nanozyme Activity

Facile synthesis of metal nanoparticles with controlled physicochemical properties using environment-friendly reagents can open new avenues in biomedical applications. Nanomaterials with controlled physicochemical properties have opened new prospects for a variety of applications. In the present study, we report a single-step photochemical synthesis of ~5 nm-sized silver (Ag) and gold (Au) nanoparticles (NPs), and Ag-Au alloy nanoparticles using L-tyrosine. The physicochemical and surface properties of both monometallic and bimetallic NPs were investigated by analytical, spectroscopic, and microscopic techniques. Our results also displayed an interaction between L-tyrosine and surface atoms that leads to the formation of AgAu NPs by preventing the growth and aggregation of the NPs. This method efficiently produced monodispersed NPs, with a narrow-sized distribution and good stability in an aqueous solution. The cytotoxicity assessment performed on breast cancer cell lines (MCF-7) revealed that the biofriendly L-tyrosine-capped AgNPs, AuNPs, and bimetallic AgAu NPs were biocompatible. Interestingly, AgAu NPs have also unveiled controlled cytotoxicity, cell viability, and in vitro peroxidase nanozyme activity reliant on metal composition and surface coating.

Hybrid Nanoplatforms Comprising Organic Nanocompartments Encapsulating Inorganic Nanoparticles for Enhanced Drug Delivery and Bioimaging Applications

Organic and inorganic nanoparticles (NPs) have attracted significant attention due to their unique physico-chemical properties, which have paved the way for their application in numerous fields including diagnostics and therapy. Recently, hybrid nanomaterials consisting of organic nanocompartments (e.g., liposomes, micelles, poly (lactic-co-glycolic acid) NPs, dendrimers, or chitosan NPs) encapsulating inorganic NPs (quantum dots, or NPs made of gold, silver, silica, or magnetic materials) have been researched for usage in vivo as drug-delivery or theranostic agents. These classes of hybrid multi-particulate systems can enable or facilitate the use of inorganic NPs in biomedical applications. Notably, integration of inorganic NPs within organic nanocompartments results in improved NP stability, enhanced bioavailability, and reduced systemic toxicity. Moreover, these hybrid nanomaterials allow synergistic interactions between organic and inorganic NPs, leading to further improvements in therapeutic efficacy. Furthermore, these platforms can also serve as multifunctional agents capable of advanced bioimaging and targeted delivery of therapeutic agents, with great potential for clinical applications. By considering these advancements in the field of nanomedicine, this review aims to provide an overview of recent developments in the use of hybrid nanoparticulate systems that consist of organic nanocompartments encapsulating inorganic NPs for applications in drug delivery, bioimaging, and theranostics.

Practical Considerations for Simulating the Plasmonic Properties of Metal Nanoparticles

Simulating the plasmonic properties of colloidally derived metal nanoparticles with accuracy to their experimentally observed measurements is challenging due to the many structural and compositional parameters that influence their scattering and absorption properties. Correlation between single nanoparticle scattering measurements and simulated spectra emphasize these strong structural and compositional relationships, providing insight into the design of plasmonic nanoparticles. This Perspective builds from this history to highlight how the structural features of models used in simulation methods such as those based on the Finite-Difference Time-Domain (FDTD) method and Discrete Dipole Approximation (DDA) are of critical consideration for correlation with experiment and ultimately prediction of new nanoparticle properties. High-level characterizations such as electron tomography are discussed as ways to advance the accuracy of models used in such simulations, allowing the plasmonic properties of structurally complex nanoparticles to be better understood. However, we also note that the field is far from bringing experiment and simulation into agreement for plasmonic nanoparticles with complex compositions, reflecting analytical challenges that inhibit accurate model generation. Potential directions for addressing these challenges are also presented.

Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

All forms of energy follow the law of conservation of energy, by which they can be neither created nor destroyed. Light-to-heat conversion as a traditional yet constantly evolving means of converting light into thermal energy has been of enduring appeal to researchers and the public. With the continuous development of advanced nanotechnologies, a variety of photothermal nanomaterials have been endowed with excellent light harvesting and photothermal conversion capabilities for exploring fascinating and prospective applications. Herein we review the latest progresses on photothermal nanomaterials, with a focus on their underlying mechanisms as powerful light-to-heat converters. We present an extensive catalogue of nanostructured photothermal materials, including metallic/semiconductor structures, carbon materials, organic polymers, and two-dimensional materials. The proper material selection and rational structural design for improving the photothermal performance are then discussed. We also provide a representative overview of the latest techniques for probing photothermally generated heat at the nanoscale. We finally review the recent significant developments of photothermal applications and give a brief outlook on the current challenges and future directions of photothermal nanomaterials.

Paper-based multiplex biosensors for inexpensive healthcare diagnostics: a comprehensive review

Multiplex detection is a smart and an emerging approach in point-of-care testing as it reduces analysis time and testing cost by detecting multiple analytes or biomarkers simultaneously which are crucial for disease detection at an early stage. Application of inexpensive substrate such as paper has immense potential and matter of research interest in the area of point of care testing for multiplexed analysis as it possesses several unique advantages. This study presents the use of paper, strategies adopted to refine the design created on paper and lateral flow strips to enhance the signal, increase the sensitivity and specificity of multiplexed biosensors. An overview of different multiplexed detection studies performed using biological samples has also been reviewed along with the challenges and advantages offered by multiplexed analysis.

Gas phase deposition of well-defined bimetallic gold-silver clusters for photocatalytic applications

Cluster beam deposition is employed for fabricating well-defined bimetallic plasmonic photocatalysts to enhance their activity while facilitating a more fundamental understanding of their properties. Au_xAg_1-x clusters with compositions (x = 0, 0.1, 0.3, 0.5, 0.7, 0.9 and 1) spanning the metals' miscibility range were produced in the gas-phase and soft-landed on TiO₂ P25-coated silicon wafers with an optimal coverage of 4 atomic monolayer equivalents. Electron microscopy images show that at this coverage most clusters remain well dispersed whereas EXAFS data are in agreement with the finding that the deposited clusters have an average size of ca. 5 nm and feature the same composition as the ablated alloy targets. A composition-dependant electron transfer from Au to Ag that is likely to impart chemical stability to the bimetallic clusters and protect Ag atoms against oxidation is additionally evidenced by XPS and XANES. Under simulated solar light, Au_xAg_1-x clusters show a remarkable composition-dependent volcano-type enhancement of their photocatalytic activity towards degradation of stearic acid, a model compound for organic fouling on surfaces. The Formal Quantum Efficiency (FQE) is peaking at the Au_0.3Ag_0.7 composition with a value that is twice as high as that of the pristine TiO₂ P25 under solar simulator. Under UV the FQE of all compositions remains similar to that of pristine TiO₂. A classical electromagnetic simulation study confirms that among all compositions Au_0.3Ag_0.7 features the largest near-field enhancement in the wavelength range of maximal solar light intensity, as well as sufficient individual photon energy resulting in a better photocatalytic self-cleaning activity. This allows ascribing the mechanism for photocatalysis mostly to the plasmonic effect of the bimetallic clusters through direct electron injection and near-field enhancement from the resonant cluster towards the conduction band of TiO₂. These results not only demonstrate the added value of using well-defined bimetallic nanocatalysts to enhance their photocatalytic activity but also highlights the potential of the cluster beam deposition to design tailored noble metal modified photocatalytic surfaces with controlled compositions and sizes without involving potentially hazardous chemical agents.

Recent Trends in Plasmon-Assisted Photocatalytic CO2 Reduction

Direct photocatalytic reduction of CO₂ has become an highly active field of research. It is thus of utmost importance to maintain an overview of the various materials used to sustain this process, find common trends, and, in this way, eventually improve the current conversions and selectivities. In particular, CO₂ photoreduction using plasmonic photocatalysts under solar light has gained tremendous attention, and a wide variety of materials has been developed to reduce CO₂ towards more practical gases or liquid fuels (CH₄ , CO, CH₃ OH/CH₃ CH₂ OH) in this manner. This Review therefore aims at providing insights in current developments of photocatalysts consisting of only plasmonic nanoparticles and semiconductor materials. By classifying recent studies based on product selectivity, this Review aims to unravel common trends that can provide effective information on ways to improve the photoreduction yield or possible means to shift the selectivity towards desired products, thus generating new ideas for the way forward.

Green room temperature synthesis of silver-gold alloy nanoparticles

Metallic alloy nanoparticles (NPs) exhibit interesting optical, electrical and catalytic properties, dependent on their size, shape and composition. In particular, silver-gold alloy NPs are widely applied as model systems to better understand the syntheses and formation (kinetics) of alloy NPs, as the two elements are fully miscible. Our study targets product design via environmentally friendly synthesis conditions. We use dextran as the reducing and stabilizing agent for the synthesis of homogeneous silver-gold alloy NPs at room temperature. Our approach is a one-pot, low temperature, reaction-controlled, green and scalable synthesis route of well-controlled composition and narrow particle size distribution. The composition over a broad range of molar gold contents is confirmed by scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy (STEM-EDX) measurements and auxiliary inductively coupled plasma-optical emission spectroscopy measurements (ICP-OES). The distributions of the resulting particles in size and composition are obtained from multi-wavelength analytical ultracentrifugation using the optical back coupling method and further confirmed by high-pressure liquid chromatography. Finally, we provide insight into the reaction kinetics during the synthesis, discuss the reaction mechanism and demonstrate possibilities for scale-up by a factor of more than 250 by increasing the reactor volume and NP concentration.

Highly Responsive Plasmon Modulation in Dopant-Segregated Nanocrystals

Electron transfer to and from metal oxide nanocrystals (NCs) modulates their infrared localized surface plasmon resonance (LSPR), revealing fundamental aspects of their photophysics and enabling dynamic optical applications. We synthesized and chemically reduced dopant-segregated Sn-doped In₂O₃ NCs, investigating the influence of radial dopant segregation on LSPR modulation and near-field enhancement (NFE). We found that core-doped NCs show large LSPR shifts and NFE change during chemical titration, enabling broadband modulation in LSPR energy of over 1000 cm^-1 and of peak extinction over 300%. Simulations reveal that the evolution of the LSPR spectra during chemical reduction results from raising the surface Fermi level and increasing the donor defect density in the shell region. These results establish dopant segregation as a useful strategy to engineer the dynamic optical modulation in plasmonic semiconductor NC heterostructures going beyond what is possible with conventional plasmonic metals.

Multifunctional Au@Ag@SiO2 Core-Shell-Shell Nanoparticles for Metal-Enhanced Fluorescence, Surface-Enhanced Raman Scattering, and Photocatalysis Applications

Au@Ag@SiO₂ core-shell-shell nanoparticles (NPs) were prepared by a facile one-pot synthetic technique. The Au@Ag core size and SiO₂ shell thicknesses are readily controlled by adjusting the precursor concentration. The multilayered NPs with dielectric SiO₂ outer shells and bimetallic Au@Ag cores exhibited both the chemical stability of Au with the high scattering efficiency of Ag. Furthermore, the SiO₂ shell is beneficial to the metal-enhanced fluorescence for biomedical applications. Metal-enhanced fluorescence, surface-enhanced Raman scattering, and photocatalytic activities of silica-coated Au@Ag, Ag, Au, and Au/Ag core-shell NPs were compared and discussed. The size and structure of Au@Ag@SiO₂ core-shell-shell NPs were optimized to maximize their optical and catalytic activities.

Correlation notice on the electrochemical dealloying and antibacterial properties of gold-silver alloy nanoparticles

Galvanic replacement reaction was used in the synthesis of bimetallic gold-silver alloy nanoparticles (Au-Ag NPs), where pre-synthesized Ag nanoparticles-polyvinylpyrrolidone (AgNPs-PVP) were used to reduce the aryldiazonium tetrachloroaurate(III) salt in water. TEM images and EDS elemental analysis showed the formation of spherical Au-Ag NPs with sizes of 12.8 ± 4.9 nm and 25.6 ± 14.4 nm for corresponding Au-Ag ratios and termed as Au_0.91Ag_0.09 and Au_0.79Ag_0.21, respectively, with different concentrations of the gold precursor. The hydrodynamic sizes measured using dynamic light scattering are 46.4 nm and 74.8 nm with corresponding zeta potentials of - 44.56 and - 25.09 mV in water, for Au_0.91Ag_0.09 and Au_0.79Ag_0.21 respectively. Oxidative leachability of Ag ion studies from the starting AgNPs-PVP in 1 M NaCl showed a significant decrease in the plasmon peak after 8 h, indicating the complete dissolution of Ag ions, however, there is enhanced oxidation resistivity of Ag from Au-Ag NPs even after 24 h. Electrochemical studies on glassy carbon electrodes displayed a low oxidation peak in aqueous solutions of 20 mM KCl at 0.16 V and KNO₃ at 0.33 V vs. saturated calomel electrode (SCE). We studied the antibacterial activity of Au-Ag alloy nanoparticles against gram-positive Staphylococcus aureus, Staphylococcus epidermidis, Enterococcus faecalis, and gram-negative Escherichia coli, Salmonella typhimurium, and Pseudomonas aeruginosa. Our findings demonstrated superior antibacterial activity of Au-Ag NPs compared with AgNPs-PVP. Moreover, the nanoparticles inhibited the S. epidermidis biofilm formation.

Asymmetric seed passivation for regioselective overgrowth and formation of plasmonic nanobowls

Plasmonic nanoparticles (NPs) have garnered excitement over the past several decades stemming from their unique optoelectronic properties, leading to their use in various sensing applications and theranostics. Symmetry dictates the properties of many nanomaterials, and nanostructures with low, but still defined symmetries, often display markedly different properties compared to their higher symmetry counterparts. While numerous methods are available to manipulate symmetry, surface protecting groups such as polymers are finding use due to their ability to achieve regioselective modification of NP seeds, which can be removed after overgrowth as shown here. Specifically, poly(styrene-b-polyacrylic acid) (PSPAA) is used to asymmetrically passivate cubic Au seeds through competition with hexadecyltrimethylammonium bromide (CTAB) ligands. The asymmetric passivation via collapsed PSPAA causes only select vertices and faces of the Au cubes to be available for deposition of new material (i.e., Au, Au-Ag alloy, and Au-Pd alloy) during seeded overgrowth. At low metal precursor concentrations, deposition follows observations from unpassivated seeds but with new material growing from only the exposed seed portions. At high metal precursor concentrations, nanobowl-like structures form from interaction between the depositing phase and the passivating PSPAA. Through experiment and simulation, the optoelectronic properties of these nanobowls were probed, finding that the interiors and exteriors of the nanobowls can be functionalized selectively as revealed by surface enhanced Raman spectroscopy (SERS).

Advances in plasmonic-based MOF composites, their bio-applications and perspectives in this field

INTRODUCTION

Nanomaterials have been used for bio-applications since the late 20st century. In an attempt to tailor and optimize their properties, and by extension their efficiency, composites have attracted considerable attention. In this regard, recent studies on plasmonic nanoparticles and metal-organic framework (NP@MOF) composites suggested these materials show great promise in this field.

AREAS COVERED

This review focused on the more recent scientific advances in the synthetic strategies to optimize plasmonic MOF nanocomposites currently available, as well as their bio-application, particularly as biosensors and therapy.

EXPERT OPINION

Plasmonic MOF nanocomposites have shown great potential as they combine the properties of both materials with proven efficiency in bio-application. On the one hand, nanoMOFs have proven their potential particularly as drug nanocarriers, owing to their exceptional porosity and tunability. On the other hand, plasmonic nanoparticles have been an asset for imaging and phototherapy. Different strategies have been reported to develop these nanocomposites, mainly including core-shell, encapsulation, and in situ reduction. In addition, advanced composite structures should be considered, such as mixed metal nanoparticles, hollow structures or the combination of several approaches. Specifically, plasmonic MOF nanocomposites prove to be attractive stimuli responsive drug delivery systems, phototherapeutic agents as well as highly sensitive biosensors.

Multidimensional characterization of noble metal alloy nanoparticles by multiwavelength analytical ultracentrifugation

In this study, we introduce a method for the simultaneous retrieval of two-dimensional size-composition distributions of noble metal Ag-Au alloy nanoparticles utilizing an analytical ultracentrifuge equipped with a multiwavelength extinction detector (MWL-AUC). MWL-AUC is used to measure coupled optical and sedimentation properties of the particles. The optical response of the nanoparticles is calculated using Mie's theory, where the particles' complex refractive index is corrected due to the effect of reduced mean free path of electrons. Using a combined analysis of the hydrodynamic and spectral data captured by MWL-AUC, the size and composition of the alloy particles is retrieved. Our method is validated through the analysis of synthetic data and by the very good agreement between experimental scanning transmission electron microscopy and our AUC data. The presented comprehensive characterization approach contributes to improved synthesis, scale-up and production of particulate systems as it provides a simple, fast and direct method to determine noble metal alloy nanoparticle size and composition distributions simultaneously.

Determination of the Concentration of Silver Atoms in Hydrosol Nanoparticles

In this work, we propose a new method for determining the concentration of silver atoms in hydrosols of nanoparticles (NPs) stabilized with various capping agents. The proposed method is based on the determination of IBT absorption in the UV region (a broad band with a weakly pronounced shoulder at ~250 nm). To determine the extinction coefficient at 250 nm, we synthesized silver nanoparticles with average sizes of 5, 10, and 25 nm, respectively. The prepared nanoparticles were characterized by TEM, HRTEM, electron diffraction, XRD, DLS, and UV-Vis spectroscopy. It has been shown that the absorption characteristics of spherical NPs are not significantly influenced by the hydrosol preparation method and the type of stabilizer used. For particles with a size of 5-25 nm, the molar extinction coefficient of Ag0 atoms was found to be equal to 3500 ± 100 L mol^-1 cm^-1 at a wavelength of 250 nm. The results of the theoretical calculations of the molar extinction coefficients for spherical nanoparticles are in good agreement with the experimental values. ICP-MS analysis confirmed the applicability of this method in the concentration range of 5 × 10^-7-1 × 10^-4 mol L^-1.

Self-Assembled Au Nanoparticle Monolayers on Silicon in Two- and Three-Dimensions for Surface-Enhanced Raman Scattering Sensing

Gold nanoparticle/silicon composites are canonical substrates for sensing applications because of their geometry-dependent physicochemical properties and high sensing activity via surface-enhanced Raman spectroscopy (SERS). The self-assembly of gold nanoparticles (AuNPs) synthesized via wet-chemistry on functionalized flat silicon (Si) and vertically aligned Si nanowire (VA-SiNW) arrays is a simple and cost-effective approach to prepare such substrates. Herein, we report on the critical parameters that influence nanoparticle coverage, aggregation, and assembly sites in two- and three-dimensions to prepare substrates with homogeneous optical properties and SERS activity. We show that the degree of AuNP aggregation on flat Si depends on the silane used for the Si functionalization, while the AuNP coverage can be adjusted by the incubation time in the AuNP solution, both of which directly affect the substrate properties. In particular, we report the reproducible synthesis of nearly touching AuNP chain monolayers where the AuNPs are separated by nanoscale gaps, likely to be formed due to the capillary forces generated during the drying process. Such substrates, when used for SERS sensing, produce a uniform and large enhancement of the Raman signal due to the high density of hot spots that they provide. We also report the controlled self-assembly of AuNPs on VA-SiNW arrays, which can provide even higher Raman signal enhancement. The directed assembly of the AuNPs in specific regions of the SiNWs with a control over NP density and monolayer morphology (i.e., isolated vs nearly touching NPs) is demonstrated, together with its influence on the resulting SERS activity.

Surface-Plasmon-Mediated Alloying for Monodisperse Au-Ag Alloy Nanoparticles in Liquid

Plasmonic noble-metal nanoparticles with broadly tunable optical properties and catalytically active surfaces offer a unique opportunity for photochemistry. Resonant optical excitation of surface-plasmon generates high-energy hot carriers, which can participate in photochemical reactions. Although the surface-plasmon-driven catalysis on molecules has been extensively studied, surface-plasmon-mediated synthesis of bimetallic nanomaterials is less reported. Herein, we perform a detailed investigation on the formation mechanism and colloidal stability of monodisperse Au-Ag alloy nanoparticles synthesized through irradiating the intermixture of Au nanochains and AgNO₃ solution with a nanosecond pulsed laser. It is revealed that the Ag atoms can be extracted from AgNO₃ solution by surface-plasmon-generated hot electrons and alloy with Au atoms. Particularly, the obtained Au-Ag alloy nanoparticles without any surfactants or ligands exhibit superior stability that is confirmed by experiments as well as DLVO-based theoretical simulation. Our work would provide novel insights into the synthesis of potentially useful bimetallic nanoparticles via surface-plasmon-medicated alloying.

Single gold nanowire-based nanosensor for adenosine triphosphate sensing by using in-situ surface-enhanced Raman scattering technique

Development of new hot spots for surface enhanced Raman scattering (SERS) technique is of great significance recently. Herein, we developed a single Au nanowire (NW)-based nanosensor for adenosine triphosphate (ATP) sensing by using in-situ SERS technique. Single Au NWs, fabricated by laser-assisted pulling method and hydrofluoric acid (HF) etching process, were linked with single-stranded HS-terminated DNA. After that, gold-silver bimetallic nanoparticles (Au/Ag NPs), attached with thiol-containing Raman dyes and ATP aptamer, were immobilized on DNA-modified single AuNW due to the designed affinity between ATP aptamer and single-stranded DNA. This single AuNW-based device exhibited strong SERS signals. In the presence of adenosine triphosphate (ATP), due to the strong specific affinity between the aptamer and the target, the Au/Ag NPs will be separated from the AuNW, resulting in the obvious decrease of the Raman signals, which can be used for ATP sensing with high sensitivity, selectivity and stability. This nanosensor can be used as an ideal platform for real applications, especially at some confined-space samples, such as trace detection, single cell and in vivo analysis.

Early detection of lung cancer via biointerference-free, target microRNA-triggered core-satellite nanocomposites

MicroRNAs (miRNAs) are emerging as essential liquid biopsy markers for early cancer detection. Currently, the clinical applications of miRNAs are lagging behind due to their high sequence similarity and rarity. Herein, we propose biointerference-free, target-triggered core-satellite nanocomposites for ultrasensitive surface-enhanced Raman spectroscopy (SERS) detection of lung cancer-related miRNA-21. Through the hybridization-based recognition effect, we observe an enormous SERS signal enhancement caused by miRNA-21-triggered assembly of core-satellite nanocomposites. This enables the sensitive detection of miRNA-21 down to the 0.1 fM level in a linear range of 10 fM to 1 nM. The use of a biointerference-free reporter further allows quantitative and direct detection of miRNA-21 from complex plasma samples, without RNA pre-extraction. As a proof of principle, we measure the level of plasma miRNA-21 in 20 lung cancer patients and 10 healthy participants. Significantly higher levels of miRNA-21 are determined in lung cancer patients than in healthy participants, with clear lower expression in stage I (n = 10) than in stage III-IV (n = 10) lung cancer patients. We, therefore, believe that this proposed strategy will have high clinical potential for sensitive quantification of miRNA markers in liquid biopsy samples and act as a complementary method for the early detection of lung cancer.

Correlating structure, morphology and properties of metal nanostructures by combining single-particle optical spectroscopy and electron microscopy

The nanoscale morphology of metal nanostructures directly defines their optical, catalytic and electronic properties and even small morphological changes can cause significant property variations. On the one hand, this dependence allows for precisely tuning and exploring properties by shape engineering; next to advanced synthesis protocols, post-synthesis modification through tailored laser modification has become an emerging tool to do so. On the other hand, with this interconnection also comes the quest for detailed structure-property correlation and understanding of laser-induced reshaping processes on the individual nanostructure level beyond ensemble averages. With the development of single-particle (ultrafast) optical spectroscopy techniques and advanced electron microscopy such understanding can in principle be gained at the femtosecond temporal and atomic spatial scale, respectively. However, accessing both on the same individual nanostructure is far from straightforward as it requires the combination of optical spectroscopy and electron microscopy. In this Minireview, we highlight key studies from recent years that performed such correlative measurements on the same individual metal nanostructure either in a consecutive ex situ manner or in situ inside the electron microscope. We demonstrate that such a detailed correlation is critical for revealing the full picture of the structure-property relationship and the physics behind light-induced nanostructure modifications. We put emphasis on the advantages and disadvantages of each methodology as well as on the unique information that one can gain only by correlative studies performed on the same individual nanostructure and end with an outlook on possible further development of this field in the near future.

Asymmetric Dichroic Colors in Stretchable Film with Embedded Au/Ag Alloy Nanoparticles

We present a new type of stretchable dichroic film in which Au and Ag alloy nanoparticles (NPs) are dispersed in polydimethylsiloxane (PDMS). The alloy NPs are synthesized with different atomic compositions and sizes to modulate their plasmonic resonance frequencies and absorption and scattering cross sections. The PDMS dichroic film in which 100 nm alloy NPs with a Au/Ag ratio of 7:3 are dispersed shows exotic optical properties under tensile strain. When 40% tensile strain is applied, the film exhibits a strain-sensitive transmission and strain-insensitive reflection behavior in which the transmittance is increased up to 2.6 times, whereas the reflectance remains unchanged. Moreover, we demonstrate a stretchable anticounterfeiting film and a flexible dichroic sculpture fabricated with the PDMS composite. This work demonstrates a new type of plasmonic application that has great potential in various applications, such as special-purpose optical films, security patterns, and smart windows.

Sensitive Detection of SARS-CoV-2 Using a Novel Plasmonic Fiber Optic Biosensor Design

The coronavirus (COVID-19) pandemic has put the entire world at risk and caused an economic downturn in most countries. This work provided theoretical insight into a novel fiber optic-based plasmonic biosensor that can be used for sensitive detection of SARS-CoV-2. The aim was always to achieve reliable, sensitive, and reproducible detection. The proposed configuration is based on Ag-Au alloy nanoparticle films covered with a layer of graphene which promotes the molecular adsorption and a thiol-tethered DNA layer as a ligand. Here, the combination of two recent approaches in a single configuration is very promising and can only lead to considerable improvement. We have theoretically analyzed the sensor performance in terms of sensitivity and resolution. To highlight the importance of the new configuration, a comparison was made with two other sensors. One is based on gold nanoparticles incorporated into a host medium; the other is composed of a bimetallic Ag-Au layer in the massive state. The numerical results obtained have been validated and show that the proposed configuration offers better sensitivity (7100 nm\RIU) and good resolution (figure of merit; FOM = 38.88 RIU - 1 and signal-to-noise ratio; SNR = 0.388). In addition, a parametric study was performed such as the graphene layers' number and the size of the nanoparticles.

Electrochemical aspects of coinage metal nanoparticles for catalysis and spectroscopy

Down scaling bulk materials can cause colloidal systems to evolve into microscopically dispersed insoluble particles. Herein, we describe the interesting applications of coinage metal nanoparticles (MNPs) as colloid dispersions especially gold and silver. The rich plasmon bands of gold and silver in the visible range are elaborated using the plasmon resonance and redox potential values of grown metal microelectrode (GME). The gradation of their standard reduction potential values (E 0), as evaluated from the Gibbs free energy change for bulk metal, is ascribed to the variation in their size. Also, the effect of nucleophiles in the electrolytic cell with metal nanoparticles (MNPs) is described. The nucleophile-guided reduction potential value is considered, which is applicable even for bulk noble metals. Typically, a low value (as low as E 0 = +0.40 V) causes the oxidation of metals at the O2 (air)/H2O interface. Under this condition, the oxidation of noble metal particles and dissolution of the noble metal in water are demonstrated. Thus, metal dissolution as a function of the size of metal nanoparticles becomes eventful and demonstrable with the addition of a surfactant to the solution. Interestingly, the reversal of the nobility of gold (Au) and silver (Ag) microelectrodes at the water/electrode interface is confirmed from the evolution of normal and inverted 'core-shell' structures, exploiting visible spectrophotometry and surface-enhanced Raman scattering (SERS) analysis. Subsequently, the effect of the size, shape, and facet- and support-selective catalysis of gold nanoparticles (NPs) and the effect of incident photons on current conversion without an applied potential are briefly discussed. Finally, the synergistic effect of the emissive behaviour of gold and silver clusters is productively exploited.

Mapping the effects of physical and chemical reduction parameters on local atomic distributions within bimetallic nanoparticles

Bimetallic nanoparticles prove advantageous over their monometallic counterparts due to the tunable, hybrid properties that result from combining different atomic species in a controlled way. The favorable optical and catalytic properties resulting from AgAu nanoparticle formation have been widely attributed to the existence of Ag-Au bonds, the maximization of which assumes the formation of a homogeneous alloy. Despite the importance of atomic scale structure in these systems, synthetic studies are typically not paired with structural characterization at the atomic scale. Herein, a comprehensive synthetic exploration of physical and chemical reduction parameters of resulting nanoparticle products is complemented with thorough X-ray characterization to probe how these parameters affect atomic scale alloy distributions within AgAu nanoparticles. Presented evidence shows Ag is substantially underincorporated into nanoparticle constructs compared with solution Ag : Au ratios regardless of precursor : reductant ratio or volume of reductant added. Both Ag and Au exhibit significant local clustering, with Ag distributed preferentially towards the nanoparticle surface. Most significantly, the results of this investigation suggest that reduction parameters alone can affect the local alloy distributions and homogeneity within bimetallic nanoparticles, even when the ratio of metallic precursors remains constant. Overall, this investigation presents the ability to control alloy distributions using kinetics and provides new considerations for optimizing synthetic methods to produce functional bimetallic nanoparticles.

On a high photocatalytic activity of high-noble alloys Au-Ag/TiO2 catalysts during oxygen evolution reaction of water oxidation

The analysis via density functional theory was employed to understand high photocatalytic activity found on the Au–Ag high-noble alloys catalysts supported on rutile TiO₂ during the oxygen evolution of water oxidation reaction (OER). It was indicated that the most thermodynamically stable location of the Au–Ag bimetal-support interface is the bridging row oxygen vacancy site. On the active region of the Au–Ag catalyst, the Au site is the most active for OER catalyzing the reaction with an overpotential of 0.60 V. Whereas the photocatalytic activity of other active sites follows the trend of Au > Ag > Ti. This finding evident from the projected density of states revealed the formation of the trap state that reduces the band gap of the catalyst promoting activity. In addition, the Bader charge analysis revealed the electron relocation from Ag to Au to be the reason behind the activity of the bimetallic that exceeds its monometallic counterparts.

Influence of Gold/Silver Ratio in Ablative Nanoparticles on Their Interaction with Aptamers and Functionality of the Obtained Conjugates

Nano-bio-conjugates, featuring noble metal gold-silver alloy nanoparticles, represent a versatile tool in diagnostics and therapeutics due to their plasmonic and antimicrobial properties tunable by the particle's gold molar fraction. However, little is known about how the binding of thiolated biomolecules to noble metal nanoparticles is influenced by the fraction of gold and silver atoms on the nanoparticle's surface and to which extend this would affect the functionality of the conjugated biomolecules. In this work, we generated gold-silver alloy nanoparticles with average diameters of 7-8 nm using the modern, surfactant-free laser ablation in liquids (LAL) synthesis approach. We conjugated them with thiolated miniStrep aptamer ligands at well-controlled aptamer-to-nanoparticle surface area ratios with maxima between 12 and 27 pmol aptamer/cm² particle surface area. The results revealed a clear correlation between surface coverage and the nanoparticles' nominal gold/silver ratio, with maximum coverage reached for gold-rich alloys and a pronounced maximum for silver-rich alloys. However, the conjugates' functionality, evaluated by binding of streptavidin, was surprisingly robust and hardly affected by the nominal composition. However, 1.5 times higher surface coverage was needed to obtain maximum functionality in the silver-rich conjugates. Based on these results, it may be concluded that the nominal composition of gold-silver alloy nano-bioconjugates is freely tunable without a pronounced impact on the attached ligands' functionality, a finding highly relevant for the flexible design of nano-bio-conjugates for future biomedical applications. This study's results may facilitate the design of alloy nano-bio-conjugates for future applications in therapeutics and diagnostics.

A portable SERS sensor for pyocyanin detection in simulated wound fluid and through swab sampling

A portable surface-enhanced Raman spectroscopy (SERS) sensor for detecting pyocyanin (PYO) in simulated wound fluid and from bacteria samples was developed. Solution-phase SERS detection protocols are designed to be compatible with two different clinical practices for wound exudate collection, namely negative pressure liquid collection and swabbing. For citrate-coated metal nanoparticles of three different compositions, i.e. gold (AuNPs), alloyed silver/gold (AgAuNPs), and silver (AgNPs), we firstly confirmed their interaction with PYO in the complex wound fluid, using fluorescence quenching experiments, which rationalized the Raman enhancement effects. We then demonstrated the Raman enhancement effects of the metal nanoparticles in the order of AgNPs > AgAuNPs > AuNPs. The limit of detection (LOD) achieved for PYO is 1.1 μM (in a linear range of 0.1-25 μM by the AgNPs), 10.9 μM (in a linear range of 5-100 μM, by the AgAuNPs), and 17.7 μM (in a linear range of 10-100 μM by the AuNPs). The AgNP and AgAuNP sensors together cover the sensitivity and dynamic range requirements for the clinical detection of wound infection, where PYO is present at a concentration of 1-50 μM. In addition, sterilized cotton swabs were used to collect wound fluid and transfer samples into AgNP solution for SERS measurements. This detection protocol was completed within 5 minutes with a LOD of 23.1 μM (in a linear range of 15-100 μM). The SERS sensing protocol was validated by its successful detection of PYO in cultured Pseudomonas aeruginosa bacteria. The findings presented in this work pave the way towards point-of-care diagnostics of wound infections.

Photodriven Catalytic Hydrogenation of CO2 to CH4 with Nearly 100% Selectivity over Ag25 Clusters

The conversion of chemically inert carbon dioxide and its photoreduction to value-added products have attracted enormous attention as an intriguing prospect for utilizing the principal greenhouse gas CO₂. Herein, we explore the use of Ag₂₅ clusters with well-defined atomic structures for high-selectivity photocatalytic hydrogenation of CO₂ to methane. Ag₂₅ clusters, with molecular-like properties and surface plasmon resonance, exhibit competitive catalytic activity for light-driven CO₂ reduction that yield an almost 100% product selectivity of methane at a relatively mild temperature (100 °C). DFT calculations reveal that the absorption of CO₂ on Ag₂₅ clusters is energetically favorable. The methanation of the Ag₂₅ cluster catalyst has been investigated by operando infrared spectroscopy, verifying that methane was produced through a -H-assisted multielectron reaction pathway via the transformation of formyl and formaldehyde species to form surface CH_x. This work presents a highly efficient strategy for high-performance CO₂ methanation via well-defined metal cluster catalysts.

Sintering-Based In-Situ Synthesis and Characterization by TEM of Noble Metal Nanoparticles for Ceramic Glaze Color Control

Gold and silver salt mixtures are incorporated in ceramic glazes for in situ development of mixtures of gold and silver nanoparticles (NPs) that subsequently allow for a wide spectrum of low metal loading color control within ceramic materials. Prior work has shown that gold NPs can be used to create vibrant, color-rich red pigments in high-temperature ceramic and glass applications, though the achievable diameter of the gold NP ultimately limits the available range of color. The current study significantly expands color control from traditional gold nanoparticle red through silver nanoparticle green via the alteration of gold-to-silver salt ratios incorporated in the glaze formulations prior to sintering. Nanoparticle-based coloring systems are tested in both oxidative and reductive firing atmospheres. While the oxidation environment is found to be prohibitive for silver NP stability, the reductive atmosphere is able to form and sustain mixtures of gold and silver NPs across a wide color spectrum. All glazes are analyzed via reflectance spectrometry for color performance and samples are characterized via TEM and EDS for composition and sizing trends. This study creates new groundwork for a color-controlled NP system based on noble metal ratio blends that are both nontoxic and achieved with radically lower metal pigment loading than traditional glazes.

Feasibility of using bimetallic Au-Ag nanoparticles for organic light-emitting devices

Matching the resonant wavelength of plasmonic nanoparticles (NPs) and the emission band of organic materials is critical for achieving optimal plasmon-enhanced luminescence in organic light-emitting devices (OLEDs). However, the spectral matching is often unsatisfactory because the interior architecture of OLEDs limits the dimensions of the NPs to support the desired wavelength adjustment. In this article, we proposed a design strategy via Au_xAg_1-x alloy NPs to enable resonance tuning while preserving the size of the NP to suit the OLED design requirements. The bimetallic NPs, especially for x < 0.6, not only add one more degree of freedom to vary the plasmon wavelength but also provide the benefits of higher scattering and more intense and outspread electric fields over a broader spectrum compared to Au monometallic NPs. These features allow smaller NPs, which are more compatible with OLED interiors, to scatter electric fields more efficiently and increase the density of molecules interacting with the NP plasmons. In the presence of a nearby dipole emitter, the bimetallic NPs can simultaneously increase radiative enhancement and suppress non-radiative losses, which are advantageous for increasing the quantum yield and luminescence efficiency of the emitter. These improvements are associated with lower intraband and interband activities resulting from the higher molar fraction of Ag in the alloy NPs. We provided composition mappings to achieve enhanced luminescence for specified wavelengths at fixed NP sizes. Finally, we theoretically demonstrated that the bimetallic NPs could improve the light-extraction efficiency of OLEDs better than Au monometallic NPs. This work provides essential guidance to enable versatile plasmon-enhanced applications with predefined nanostructural geometries and wavelengths to match the device requirements.

Precision photothermal therapy and photoacoustic imaging by in situ activatable thermoplasmonics

Phototherapy holds great promise for disease treatment; however, traditional "always-on" photoagents have been restricted to clinical translation due to their nonspecific response and side effects on normal tissues. Here, we show a tumor microenvironment activated photothermal and photoacoustic agent as an activatable prodrug and probe that allows precise cancer diagnosis and treatment. Such an in situ revitalized therapeutic and contrast agent is achieved via controllable plasmonic heating for thermoplasmonic activation. This enables monitoring of signal molecule dynamics, real-time photothermal and photoacoustic imaging of tumors and lymph node metastasis, and targeted photothermal therapy without unwanted phototoxicity to normal tissues. Our study provides a practical solution to the non-specificity problem in phototherapy and offers precision cancer therapeutic and theranostic strategies. This work may advance the development of ultrasensitive disease diagnosis and precision medicine.

A rational design of multimodal asymmetric nanoshells as efficient tunable absorbers within the biological optical window

In this work, the optical properties of asymmetric nanoshells with different geometries are comprehensively investigated in the quasi-static regime by applying the dipolar model and effective medium theory. The plasmonic behaviors of these nanostructures are explained by the plasmon hybridization model. Asymmetric hybrid nanoshells, composed of off-center core or nanorod core surrounded by a spherical metallic shell layer possess highly geometrically tunable optical resonances in the near-infrared regime. The plasmon modes of this nanostructures arise from the hybridization of the cavity and solid plasmon modes at the inner and outer surfaces of the shell. The results reveal that the symmetry breaking drastically affects the strength of hybridization between plasmon modes, which ultimately affects the absorption spectrum by altering the number of resonance modes, their wavelengths and absorption efficiencies. Therefore, offsetting the spherical core as well as changing the internal geometry of the nanoparticle to nanorod not only shift the resonance frequencies but can also strongly modify the relative magnitudes of the absorption efficiencies. Furthermore, higher order multipolar plasmon modes can appear in the spectrum of asymmetric nanoshell, especially in nanoegg configuration. The results also indicate that the strength of hybridization strongly depends on the metal of shell, material of core and the filling factor. Using Au-Ag alloy as a material of the shell can provide red-shifted narrow resonance peak in the near-infrared regime by combining the specific features of gold and silver. Moreover, inserting a high permittivity core in a nanoshell corresponds to a red-shift, while a core with small dielectric constant results in a blue-shift of spectrum. We envision that this research offers a novel perspective and provides a practical guideline in the fabrication of efficient tunable absorbers in the nanoscale regime.

Core-shell nanostructures: a simplest two-component system with enhanced properties and multiple applications

With the pace of time, synthesis of nanomaterials has paved paths to blend two or more materials having different properties into hybrid nanoparticles. Therefore, it has become possible to combine two different functionalities in a single nanoparticle and their properties can be enhanced or modified by coupling of two different components. Core-shell technology has now represented a new trend in analytical sciences. Core-shell nanostructures are in demand due to their specific design and geometry. They have internal core of one component (metal or biomolecules) surrounded by a shell of another component. Core-shell nanoparticles have great importance due to their high thermal stability, high solubility and lower toxicity. In this review, recent progress in development of new and sophisticated core-shell nanostructures has been explored. The first section covers introduction throwing light on basics of core-shell nanoparticles. Following section classifies core-shell nanostructures into single core/shell, multicore/single shell, single core/multishell and multicore/multishell nanostructures. Next main section gives a brief description on types of core-shell nanomaterials followed by processes for the synthesis of core-shell nanostructures. Ultimately, the final section focuses on the application areas such as drug delivery, bioimaging, solar cell applications etc.

Facile synthesis of silver/gold alloy nanoparticles for ultra-sensitive rhodamine B detection

The synthesis of Ag/Au nanoparticles (NPs) in a controlled manner has been a challenge for a long time. The aim of this report is to present a systematic study on the fabrication, characterization of Ag/Au alloy NP-based surface-enhanced Raman spectroscopy (SERS) substrates. Silver (Ag) and gold (Au) colloidal NPs were prepared by chemical reduction route of the corresponding metal salts by trisodium citrate (TSC). Ag/Au alloy nanoparticles with varying molar fractions are prepared in aqueous solution by the simultaneous reduction of AgNO3 and HAuCl4 by TSC. The composition of Ag and Au in the alloy samples was controlled by tuning the molar ratio of Ag+/Au3+ in the mixture solution. The morphologies of the different products were characterized by TEM, and the size of obtained samples was in the range of 40 to 60 nm. The resulting samples were denoted as AgNPs, AuNPs, Ag3Au, AgAu, and AgAu3 NPs. In order to compare the optical property of the Ag/Au alloy and Ag/Au mixture, we mixed the pure Ag and Au NPs with different ratios to obtain the aggregated nanoparticles. Ag/Au alloy NPs were demonstrated as an ultrasensitive SERS substrate for the detection of rhodamine B (RhB) molecules. The concentration of RhB ranged from 10-11 to 10-5 M. The effect of the Au content on the optical and SERS properties of the Ag/Au alloys was studied. The obtained results show that the Au content in the Ag/Au alloys play an important role in the physical properties of Ag/Au alloy NPs. The SERS spectra of RhB from the as-prepared Ag/Au alloy NP substrates indicated the superior enhancement with high reproducibility and sensitivity compared to those of Ag or Au samples. Interestingly, the highest SERS activity was achieved for the Ag3Au sample with an enhancement factor larger than 1010 for 10-11 M RhB and a limit of detection (LOD) at 10-11 M, as well as good long-term stability after storage for 1 year. As far as we know, this is the highest sensitivity record of RhB by SERS detection. Furthermore, the composition-dependent SERS activity was explained in detail. These advantages demonstrated the potential for growing Ag/Au alloy NP-based SERS substrates in food safety and bioanalysis.