Differential Adsorption of Phenol Derivatives onto a Polymeric Sorbent: A Combined Molecular Modeling and Experimental Study

Degradation of benzophenone-3 by the ozonation in aqueous solution: kinetics, intermediates and toxicity

Benzophenone-3 (BP-3) is a popular ultraviolet absorbing chemical and has an adverse impact on aquatic ecosystems and human health. We determined the reaction kinetic constants of BP-3 and its de-proton pattern reacting with the molecular ozone or hydroxyl radical (·OH) for the first time. The obtained constant of the molecular ozone reacting with BP-3 or BP-3(-) was 1.03(±0.21) × 10(2) or 1.85(±0.098) × 10(5) M(-1) s(-1), respectively. And, the constant for BP-3 reacting with ·OH was 9.74(±0.21) × 10(9) or 10.13(±0.25) × 10(9) M(-1) s(-1) as using 4-chlorobenzoic acid and benzotriazole as reference compounds, respectively. The intermediates generated in the molecular ozone (12 kinds) or ·OH oxidation (18 kinds) were identified by LC-MS/MS. The removal efficiency of BP-3 in ozonation was dependent on the initial concentration of ozone, BP-3, and matrix water quality. The detoxification of BP-3 ozonation was depended on initial ozone dose using Chlorella vulgaris as the probe. Higher ozone dose increased the toxicity of the solution for more BP-3 being degraded and more intermediates formed, suggesting that the sole ozonation is not an effect approach for the degradation of BP-3 and some other energy should be combined.

Isolation of Renewable Phenolics by Adsorption on Ultrastable Hydrophobic MIL-140 Metal-Organic Frameworks

The isolation and separation of phenolic compounds from aqueous backgrounds is challenging and will gain in importance as we become more dependent on phenolics from lignocellulose-derived bio-oil to meet our needs for aromatic compounds. Herein, we show that highly stable and hydrophobic Zr metal-organic frameworks of the MIL-140 type are effective adsorbent materials for the separation of different phenolics and far outperform other classes of porous solids (silica, zeolites, carbons). The mechanism of the hydroquinone-catechol separation on MIL-140C was studied in detail by combining experimental results with computational techniques. Although the differences in adsorption enthalpy between catechol and hydroquinone are negligible, the selective uptake of catechol in MIL-140C is explained by its dense π-π stacking in the pores. The interplay of enthalpic and entropic effects allowed separation of a complex, five-compound phenol mixture through breakthrough over a MIL-140C column. Unlike many other metal-organic frameworks, MIL-140C is remarkably stable and maintained structure, porosity and performance after five adsorption-desorption cycles.

Adsorptive removal of phenol from aqueous phase by using a porous acrylic ester polymer

The removal of phenol from aqueous solution was examined by using a porous acrylic ester polymer (Amberlite XAD-7) as an adsorbent. Favorable phenol adsorption was observed at acidic solution pH and further increase of solution pH results in a marked decrease of adsorption capacity, and the coexisting inorganic salt NaCl exerts positive effect on the adsorption process. Adsorption isotherms of phenol were linearly correlated and found to be well represented by either the Langmuir or Freundlich isotherm model. Thermodynamic parameters such as changes in the enthalpy (DeltaH), entropy (DeltaS) and free energy (DeltaG) indicate that phenol adsorption onto XAD-7 is an exothermic and spontaneous process in nature, and lower ambient temperature results in more favorable adsorption. Kinetic experiments at different initial solute concentrations were investigated and the pseudo-second-order kinetic model was successfully represented the kinetic data. Additionally, the column adsorption result showed that a complete removal of phenol from aqueous phase can be achieved by XAD-7 beads and the exhausted adsorbent was amenable to an entire regeneration by using ethanol as the regenerant. More interestingly, relatively more volume of hot water in place of ethanol can also achieve a similar result for repeated use of the adsorbent.

Solubilization of phenols in anionic polyelectrolyte gels with adsorbed cationic surfactant

Solubilization isotherms for various phenols in cetylpyridinium chloride (CPC)-polyelectrolyte gel aggregates have been determined in order to compare solubilization within these aggregates with that in free micelles and to examine the effects of gel chemistry and structure on solubilization. The isotherms describing solubilization are quite similar to those found for free surfactant in solution. Solutes that are more hydrophobic give rise to larger solubilization constants with trends similar to what is seen for hydrophobic effects in adsorption from aqueous solutions onto hydrophobic solids. The solubilization constants decrease as the fraction of solute in the aggregates increases, indicating that the solutes partition into the palisade region of the aggregates. Solubilization is found to be quite insensitive to changes in gel structure (cross-linker varying from 1% to 3%) and chemistry (poly(acrylic acid) versus poly(methacrylic acid) and neutralization from 50% to 100%). However, the switch from poly(acrylic acid) to poly(methacrylic acid) did give rise to a slight decrease in magnitude of the slope of the isotherm. The most significant factors appear to be the initial concentration of surfactant in solution and the ratio of surfactant solution to gel amount. A decrease in surfactant concentration (especially combined with an increase in solution volume) gives rise to a decrease in solubilization constants.

Interpreting trends in the binding of cyclic ureas to HIV-1 protease

The design of new HIV protease inhibitors requires an improved understanding of the physical basis of inhibitor/protein binding. Here, the binding affinities of seven aliphatic cyclic ureas to HIV-1 protease are calculated using a predominant states method and an implicit solvent model based upon finite difference solutions of the Poisson-Boltzmann equation. The calculations are able to reproduce the observed U-shaped trend of binding free energy as a function of aliphatic chain length. Interestingly, the decrease in affinity for the longest chains is attributable primarily to the energy cost of partly desolvating charged aspartic and arginine groups at the mouths of the active site. Even aliphatic chains too short to contact these charged groups directly are subject to considerable desolvation penalties. We are not aware of other systems where binding affinity trends have been attributed to long-ranged electrostatic desolvation of ionized groups. A generalized Born/surface area solvation model yields a much smaller change in desolvation energy with chain length and, therefore, does not reproduce the experimental binding affinity trends. This result suggests that the generalized Born model should be used with caution for complex, partly desolvated systems like protein binding sites. We also find that changing the assumed protonation state of the active site aspartyl dyad significantly affects the computed binding affinity trends. The protonation state of the aspartyl dyad in the presence of cyclic ureas is discussed in light of the observation that the monoprotonated state reproduces the experimental results best.

The physical basis of nucleic acid base stacking in water

It has been argued that the stacking of adenyl groups in water must be driven primarily by electrostatic interactions, based upon NMR data showing stacking for two adenyl groups joined by a 3-atom linker but not for two naphthyl groups joined by the same linker. In contrast, theoretical work has suggested that adenine stacking is driven primarily by nonelectrostatic forces, and that electrostatic interactions actually produce a net repulsion between adenines stacking in water. The present study provides evidence that the experimental data for the 3-atom-linked bis-adenyl and bis-naphthyl compounds are consistent with the theory indicating that nonelectrostatic interactions drive adenine stacking. First, a theoretical conformational analysis is found to reproduce the observed ranking of the stacking tendencies of the compounds studied experimentally. A geometric analysis identifies two possible reasons, other than stronger electrostatic interactions, why the 3-atom-linked bis-adenyl compounds should stack more than the bis-naphthyl compounds. First, stacked naphthyl groups tend to lie further apart than stacked adenyl groups, based upon both quantum calculations and crystal structures. This may prevent the bis-naphthyl compound from stacking as extensively as the bis-adenyl compound. Second, geometric analysis shows that more stacked conformations are sterically accessible to the bis-adenyl compound than to the bis-naphthyl compound because the linker is attached to the sides of the adenyl groups, but to the ends of the naphthyl groups. Finally, ab initio quantum mechanics calculations and energy decompositions for relevant conformations of adenine and naphthalene dimers support the view that stacking in these compounds is driven primarily by nonelectrostatic interactions. The present analysis illustrates the importance of considering all aspects of a molecular system when interpreting experimental data, and the value of computer models as an adjunct to chemical intuition.