Plasmonic Near-Field Absorbers for Ultrathin Solar Cells

Perspectives on weak interactions in complex materials at different length scales

Nanocomposite materials consist of nanometer-sized quantum objects such as atoms, molecules, voids or nanoparticles embedded in a host material. These quantum objects can be exploited as a super-structure, which can be designed to create material properties targeted for specific applications. For electromagnetism, such targeted properties include field enhancements around the bandgap of a semiconductor used for solar cells, directional decay in topological insulators, high kinetic inductance in superconducting circuits, and many more. Despite very different application areas, all of these properties are united by the common aim of exploiting collective interaction effects between quantum objects. The literature on the topic spreads over very many different disciplines and scientific communities. In this review, we present a cross-disciplinary overview of different approaches for the creation, analysis and theoretical description of nanocomposites with applications related to electromagnetic properties.

Metal nanoparticle arrays via a water-based lift-off scheme using a block copolymer template

Metalnanoparticles(NPs) can exhibit unique electronic, magnetic, optical, and catalytic properties. Highly ordered, dense arrays of non-close-packed, surface-supported metal NPs are thus of potential use in a wide range of applications. Implementing such arrays over large surfaces can, however, be both technologically challenging and prohibitively expensive using conventional top-down nanofabrication techniques. Moreover, many existing patterning methods are too harsh for sensitive substrate surfaces and their applications. To address this, we here investigate a fabrication protocol involving a water-based lift-off scheme in which the template pattern generation is rapidly and inexpensively achieved throughblock copolymer(BCP) self-assembly. A three-layer lift-off stack consisting of, from top to bottom, a poly(styrene-block-2-vinyl pyridine) template, a SiO_xintermediate hardmask, and a water-soluble poly(vinyl alcohol) sacrificial layer is employed in this endeavor.Solvent-induced surface reconstruction(SISR) is used to generate an initial surface topography in the BCP template which is subsequently transferred to the layers beneath in a sequence of reactive ion etching steps. Through judicious selection of stack materials and dry etch chemistries, a layered, high-aspect-ratio, nanoporous mask is thus implemented. After metal deposition, the mask and excess material are simply removed in a lift-off step by dissolving the bottommost sacrificial layer in water. The incorporation of an intermediate hardmask and a water-soluble sacrificial layer obviates the need for harmful and/or corrosive lift-off solvents and decouples the BCP self-assembly process from the influence of substrate properties. We demonstrate the generation of well-ordered arrays of Au NPs capable of supporting sharp, localized surface plasmon resonances. We also investigate improvements to large-scale uniformity, as this is found sensitive to the SISR termination step in the original protocol. Extensions of the technique to other BCP morphologies and materials deposited ought to be straightforward.

Process Window for Seeded Growth of Arrays of Quasi-Spherical Substrate-Supported Au Nanoparticles

The controlled growth of surface-supported metal nanoparticles (NPs) is essential to a broad range of applications. To this end, we explore the seeded growth of highly ordered arrays of substrate-supported Au NPs through a fully orthogonal design of experiment (DoE) scheme applied to a reaction system consisting of HAuCl₄, citrate, and hydrogen peroxide. Scanning electron microscopy in combination with digital image analysis (DIA) is used to quantitatively characterize the resultant NP populations in terms of both particle and array features. The effective optical properties of the NP arrays are additionally analyzed using spectroscopic ellipsometry (SE), allowing characteristics of the localized surface plasmon resonances (LSPRs) of the arrays to be quantified. We study the dependence of the DIA- and SE-extracted features on the different reagent concentrations through modeling using multiple linear regression with backward elimination of independent variables. A process window is identified for which uniform arrays of quasi-spherical Au NPs are grown over large surface areas. Aside from reagent concentrations the system is highly sensitive to the hydrodynamic conditions during the deposition. This issue is likely caused by an Au precursor mass-transport limitation of the reduction reaction and it is found that agitation of the growth medium is best avoided to ensure a macroscopically even deposition. Parasitic homogeneous nucleation can also be a challenge and was separately studied in a full DoE scheme with equivalent growth media but without substrates, using optical tracking of the solutions over time. Conditions yielding quasi-spherical surface-supported NPs are found to also be affiliated with strong tendencies for parasitic homogeneous nucleation and thereby loss of Au precursor, but addition of polyvinyl alcohol can possibly help alleviate this issue.

Ultra-narrowband near-infrared tunable two-dimensional perfect absorber for refractive index sensing

An ultra-narrow-bandwidth near-infrared perfect plasmonic absorber with a periodic structure composed of metal-insulator-metal configuration is numerically designed and analyzed for a refractive index sensor. A perfect absorptivity of 99.99% and a rather narrow bandwidth of 2 nm are observed in the near-infrared wave band when the light is vertically incident in the structure. The ultra-high absorption and ultra-narrow bandwidth are explained as local surface plasmon resonance stimulated in the structure. The absorber is put into use as a plasmonic refractive index sensor with wavelength sensitivity as high as 1500 nm/RIU and figure of merit as high as 750, which significantly surpass those of many plasmonic sensors proposed in the past few decades. The designed absorber is tunable by changing geometry parameters. Because of the excellent sensing properties mentioned above, the proposed structure can be widely applied in fields such as photodetectors, biosensors, and chemical molecule detection.

Numerical analysis of an ultra-wideband metamaterial absorber with high absorptivity from visible light to near-infrared

In this study, we designed a novel ultra-wideband (UWB) absorber and numerically analyzed it to demonstrate that its light absorptivity was greater than 90% in the wavelength range of visible light and near-infrared (405-1505 nm). The structure of proposed novel UWB absorber consisted of four layers of films, including silica, titanium, magnesium fluoride, and aluminium, and the upper silica and titanium layers had rectangular cubes in them. For that, the excitations of propagating surface plasmon resonance (PSPR), local surface plasmon resonance (LSPR), and the resonance of Fabry-Perot (FP) cavity were generated at the same time and combined to reach the effect of perfect absorption and ultra-wideband. The proposed absorber had an average absorptivity of 95.14% in the wavelength range of 405 ∼ 1505 nm when the light was under normal incidence. In addition, the UWB absorber was large incident angle insensitive and polarization-independent. The absorber proposed in the paper had great prospects in the fields of thermal electronic equipment, solar power generation, and perfect cloaking.

Ultrafast Photoemission Electron Microscopy: Imaging Plasmons in Space and Time

Plasmonics is a rapidly growing field spanning research and applications across chemistry, physics, optics, energy harvesting, and medicine. Ultrafast photoemission electron microscopy (PEEM) has demonstrated unprecedented power in the characterization of surface plasmons and other electronic excitations, as it uniquely combines the requisite spatial and temporal resolution, making it ideally suited for 3D space and time coherent imaging of the dynamical plasmonic phenomena on the nanofemto scale. The ability to visualize plasmonic fields evolving at the local speed of light on subwavelength scale with optical phase resolution illuminates old phenomena and opens new directions for growth of plasmonics research. In this review, we guide the reader thorough experimental description of PEEM as a characterization tool for both surface plasmon polaritons and localized plasmons and summarize the exciting progress it has opened by the ultrafast imaging of plasmonic phenomena on the nanofemto scale.

Quantum Leap from Gold and Silver to Aluminum Nanoplasmonics for Enhanced Biomedical Applications

Nanotechnology has been used in many biosensing and medical applications, in the form of noble metal (gold and silver) nanoparticles and nanostructured substrates. However, the translational clinical and industrial applications still need improvements of the efficiency, selectivity, cost, toxicity, reproducibility, and morphological control at the nanoscale level. In this review, we highlight the recent progress that has been made in the replacement of expensive gold and silver metals with the less expensive aluminum. In addition to low cost, other advantages of the aluminum plasmonic nanostructures include a broad spectral range from deep UV to near IR, providing additional signal enhancement and treatment mechanisms. New synergistic treatments of bacterial infections, cancer, and coronaviruses are envisioned. Coupling with gain media and quantum optical effects improve the performance of the aluminum nanostructures beyond gold and silver.

A Tunable Polymer-Metal Based Anti-Reflective Metasurface

Anti-reflective surfaces are of great interest for optical devices, sensing, photovoltaics, and photocatalysis. However, most of the anti-reflective surfaces lack in situ tunability of the extinction with respect to wavelength. This communication demonstrates a tunable anti-reflective surface based on colloidal particles comprising a metal core with an electrochromic polymer shell. Random deposition of these particles on a reflective surface results in a decrease in the reflectance of up to 99.8% at the localized surface plasmon resonance frequency. This narrow band feature can be tuned by varying the pH or by application of an electric potential, resulting in wavelength shifts of up to 30 nm. Electrophoretic particle deposition is shown to be an efficient method for controlling the interparticle distance and thereby further optimizing the overall efficiency of the anti-reflective metasurface.

High-performance sensor achieved by hybrid guide-mode resonance/surface plasmon resonance platform

We perform a comprehensive analysis of multiband absorption properties in a metal-dielectric-metal-dielectric (MDMD) nanostructure under TM wave illumination. The multiband absorption can be attributed to the hybridization of the surface plasmon resonance (SPR) and the guide-mode resonance (GMR), and we identify the hybrid GMR/SPR by the dispersion relation equations of the SPR and GMR, respectively. More importantly, the MDMD nanostructure is very sensitive to the change of the dielectric environment for the special hybrid structure; thus, it can function as a good candidate for ultrasensitive biochemical sensing. The highest sensitivity of the MDMD nanostructure reaches 1087 nm/RIU with the figure of merit (FoM) of 23 and the new figure of merit (FoM^*) of 483; it is performed by the absorption peak at 1796.1 nm of the double surface plasmon polariton with the strongest field enhancement at the surface.

Confined Etching within 2D and 3D Colloidal Crystals for Tunable Nanostructured Templates: Local Environment Matters

We report the isotropic etching of 2D and 3D polystyrene (PS) nanosphere hcp arrays using a benchtop O₂ radio frequency plasma cleaner. Unexpectedly, this slow isotropic etching allows tuning of both particle diameter and shape. Due to a suppressed etching rate at the point of contact between the PS particles originating from their arrangement in 2D and 3D crystals, the spherical PS templates are converted into polyhedral structures with well-defined hexagonal cross sections in directions parallel and normal to the crystal c-axis. Additionally, we found that particles located at the edge (surface) of the hcp 2D (3D) crystals showed increased etch rates compared to those of the particles within the crystals. This indicates that 2D and 3D order affect how nanostructures chemically interact with their surroundings. This work also shows that the morphology of nanostructures periodically arranged in 2D and 3D supercrystals can be modified via gas-phase etching and programmed by the superlattice symmetry. To show the potential applications of this approach, we demonstrate the lithographic transfer of the PS template hexagonal cross section into Si substrates to generate Si nanowires with well-defined hexagonal cross sections using a combination of nanosphere lithography and metal-assisted chemical etching.

Superabsorbing, Artificial Metal Films Constructed from Semiconductor Nanoantennas

In 1934, Wilhelm Woltersdorff demonstrated that the absorption of light in an ultrathin, freestanding film is fundamentally limited to 50%. He concluded that reaching this limit would require a film with a real-valued sheet resistance that is exactly equal to R = η/2 ≈ 188.5Ω/□, where [Formula: see text] is the impedance of free space. This condition can be closely approximated over a wide frequency range in metals that feature a large imaginary relative permittivity εr″, that is, a real-valued conductivity σ = ε0εr″ω. A thin, continuous sheet of semiconductor material does not facilitate such strong absorption as its complex-valued permittivity with both large real and imaginary components preclude effective impedance matching. In this work, we show how a semiconductor metafilm constructed from optically resonant semiconductor nanostructures can be created whose optical response mimics that of a metallic sheet. For this reason, the fundamental absorption limit mentioned above can also be reached with semiconductor materials, opening up new opportunities for the design of ultrathin optoelectronic and light harvesting devices.

Hot Carrier Extraction with Plasmonic Broadband Absorbers

Hot charge carrier extraction from metallic nanostructures is a very promising approach for applications in photocatalysis, photovoltaics, and photodetection. One limitation is that many metallic nanostructures support a single plasmon resonance thus restricting the light-to-charge-carrier activity to a spectral band. Here we demonstrate that a monolayer of plasmonic nanoparticles can be assembled on a multistack layered configuration to achieve broadband, near-unit light absorption, which is spatially localized on the nanoparticle layer. We show that this enhanced light absorbance leads to ∼40-fold increases in the photon-to-electron conversion efficiency by the plasmonic nanostructures. We developed a model that successfully captures the essential physics of the plasmonic hot electron charge generation and separation in these structures. This model also allowed us to establish that efficient hot carrier extraction is limited to spectral regions where (i) the photons have energies higher than the Schottky junctions and (ii) the absorption of light is localized on the metal nanoparticles.

Plasmon-enhanced performance of an ultrathin silicon solar cell using metal-semiconductor core-shell hemispherical nanoparticles and metallic back grating

This paper presents a concept to significantly improve the photocurrent of ultrathin crystalline silicon solar cells using plasmonic hemispherical dielectric-metal (core-shell) nanoparticles and backside gratings. The design of three-dimensional spherical and hemispherical arrays of nanoparticles on top of the surface of 0.8 μm crystalline silicon solar cells was simulated using finite-difference time-domain (FDTD) method. We used the FDTD results to investigate the photocurrent by solving the Poisson and drift diffusion equations. The results indicate an enhancement of between 80% and 93% in the photocurrent for cells with hemispherical Ag and Ag-SiO₂ core-shell nanoparticles, respectively, compared to a cell with spherical nanoparticles. In addition, for obtaining a higher photocurrent, triangular gratings were applied on the back side of the absorber and we obtained a photocurrent of 22  mA/cm². The simulated results indicate that the proposed structures increase the spectral response of thin-film crystalline silicon solar cells over a solar spectrum in the range of 400 nm-1200 nm. Finally, we investigated photocurrent as a function of incidence light angle and concluded that this approach is applicable to various thicknesses and shapes of nanoparticles.

Metal-dielectric-metal based narrow band absorber for sensing applications

We have investigated numerically the narrowband absorption property of a metal-dielectric-metal based structure which includes a top metallic nanoring arrays, a metal backed plate, and a middle dielectric spacer. Its absorption is up to 90% with linewidth narrower than 10 nm. This can be explained in terms of surface lattice resonance of the periodic structure. The spectrum with the sharp absorption dip, i.e. the lattice resonance, strongly depends on the refractive index of media surrounding the nanorings. This feature can be explored to devise a refractive index sensor, of which the bulk sensitivity factor is one order larger than that based on gap resonance mode, while the surface sensitivity factor can be two times larger. The proposed narrowband absorber has potential in applications of plasmonic biosensors.

Direct Plasmon-Driven Photoelectrocatalysis

Harnessing the energy from hot charge carriers is an emerging research area with the potential to improve energy conversion technologies.1-3 Here we present a novel plasmonic photoelectrode architecture carefully designed to drive photocatalytic reactions by efficient, nonradiative plasmon decay into hot carriers. In contrast to past work, our architecture does not utilize a Schottky junction, the commonly used building block to collect hot carriers. Instead, we observed large photocurrents from a Schottky-free junction due to direct hot electron injection from plasmonic gold nanoparticles into the reactant species upon plasmon decay. The key ingredients of our approach are (i) an architecture for increased light absorption inspired by optical impedance matching concepts,4 (ii) carrier separation by a selective transport layer, and (iii) efficient hot-carrier generation and injection from small plasmonic Au nanoparticles to adsorbed water molecules. We also investigated the quantum efficiency of hot electron injection for different particle diameters to elucidate potential quantum effects while keeping the plasmon resonance frequency unchanged. Interestingly, our studies did not reveal differences in the hot-electron generation and injection efficiencies for the investigated particle dimensions and plasmon resonances.

Nanoslit-microcavity-based narrow band absorber for sensing applications

We propose an ultranarrow bandwidth perfect infrared absorber consisting of a metal periodic structured surface with nanoslits, a spacer dielectric, and a metal back plate. Its bandwidth and aborption are respectively about 8 nm and 95%. The thickness of the nanobars and the spacer, and the width of the nanoslits are primary factors determining the absorption performance. This structure not only has narrow bandwidth but also can obtain the giant electric field enhancement in the tiny volume of the nanoslits. Operated as a refractive index sensor, this structure has figure of merit as high as 25. It has potential in biomedical and sensing applications.

Synergistic Effects in the Coupling of Plasmon Resonance of Metal Nanoparticles with Excited Gold Clusters

When molecules or clusters are within the proximity of metal particles, their electronic transitions can be drastically enhanced. We have now probed the off-resonance excitation of molecule-like, glutathione-capped gold clusters (Au-GSH) in the close proximity of larger (plasmonic) Au and Ag nanoparticles. The excited state absorption spectrum of Au-GSH* is obtained with monophotonic excitation. The characteristic absorption of Au-GSH* allows us to probe the influence of excited plasmonic nanoparticles coupled with the clusters. Although infrared (775 nm) lasers pulses do not produce Au-GSH*, the excited states of these clusters are formed when coupled with metal (Au, Ag) nanoparticles. Interestingly, the coupled excitation of Au-GSH/AgNP with 775 nm laser pulses also results in an enhanced field effect, as seen from increased plasmon response of the metal nanoparticles. Transient absorption measurements confirm the synergy between these two inherently different nanomaterials, causing them to display greater excitation features. Better understanding of metal cluster-metal nanoparticle interactions will have important implications in designing light harvesting systems, and optoelectronic devices.

Theory of plasmon enhanced interfacial electron transfer

A particular attempt to improve the efficiency of a dye sensitized solar cell is it's decoration with metal nano-particles (MNP). The MNP-plasmon induced enhancement of the local field enlarges the photoexcitation of the dyes and a subsequent improvement of the charge separation efficiency may result. In a recent work (2014 J. Phys. Chem. C 118 2812) we presented a theory of plasmon enhanced interfacial electron transfer for perylene attached to a TiO2 surface and placed in the proximity of a spherical MNP. These earlier studies are generalized here to the coupling of to up to four MNPs and to the use of somewhat altered molecular parameters. If the MNPs are placed close to each other strong hybridization of plasmon excitations appears and a broad resonance to which molecular excitations are coupled is formed. To investigate this situation the whole charge injection dynamics is described in the framework of the density matrix theory. The approach accounts for optical excitation of the dye coupled to the MNPs and considers subsequent electron injection into the rutile TiO2-cluster. Using a tight-binding model for the TiO2-system with about 10(5) atoms the electron motion in the cluster is described. We again consider short optical excitation which causes an intermediate steady state with a time-independent overall probability to have the electron injected into the cluster. This probability is used to introduce an enhancement factor which rates the influence of the MNP. Values larger than 500 are obtained.

Efficient passivated phthalocyanine-quantum dot solar cells

The power conversion efficiency of CdSe and CdS quantum dot sensitized solar cells is enhanced up to 45% for CdSe and 104% for CdS by passivation with an asymmetrically disulfide substituted phthalocyanine.

Toward omnidirectional light absorption by plasmonic effect for high-efficiency flexible nonvacuum Cu(In,Ga)Se2 thin film solar cells

We have successfully demonstrated a great advantage of plasmonic Au nanoparticles for efficient enhancement of Cu(In,Ga)Se2(CIGS) flexible photovoltaic devices. The incorporation of Au NPs can eliminate obstacles in the way of developing ink-printing CIGS flexible thin film photovoltaics (TFPV), such as poor absorption at wavelengths in the high intensity region of solar spectrum, and that occurs significantly at large incident angle of solar irradiation. The enhancement of external quantum efficiency and photocurrent have been systematically analyzed via the calculated electromagnetic field distribution. Finally, the major benefits of the localized surface plasmon resonances (LSPR) in visible wavelength have been investigated by ultrabroadband pump-probe spectroscopy, providing a solid evidence on the strong absorption and reduction of surface recombination that increases electron-hole generation and improves the carrier transportation in the vicinity of pn-juction.

Plasmonic effects of au/ag bimetallic multispiked nanoparticles for photovoltaic applications

In recent years, there has been considerable interest in the use of plasmons, that is, free electron oscillations in conductors, to boost the performance of both organic and inorganic thin film solar cells. This has been driven by the possibility of employing thin active layers in solar cells in order to reduce materials costs, and is enabled by significant advances in fabrication technology. The ability of surface plasmons in metallic nanostructures to guide and confine light in the nanometer scale has opened up new design possibilities for solar cell devices. Here, we report the synthesis and characterization of highly monodisperse, reasonably stable, multipode Au/Ag bimetallic nanostructures using an inorganic additive as a ligand for photovoltaic applications. A promising surface enhanced Raman scattering (SERS) effect has been observed for the synthesized bimetallic Au/Ag multispiked nanoparticles, which compare favorably well with their Au and Ag spherical nanoparticle counterparts. The synthesized plasmonic nanostructures were incorporated on the rear surface of an ultrathin planar c-silicon/organic polymer hybrid solar cell, and the overall effect on photovoltaic performance was investigated. A promising enhancement in solar cell performance parameters, including both the open circuit voltage (VOC) and short circuit current density (JSC), has been observed by employing the aforementioned bimetallic multispiked nanoparticles on the rear surface of solar cell devices. A power conversion efficiency (PCE) value as high as 7.70% has been measured in a hybrid device with Au/Ag multispiked nanoparticles on the rear surface of an ultrathin, crystalline silicon (c-Si) membrane (∼ 12 μm). This value compares well to the measured PCE value of 6.72% for a similar device without nanoparticles. The experimental observations support the hope for a sizable PCE increase, due to plasmon effects, in thin-film, c-Si solar cells in the near future.

Metamaterial mirrors in optoelectronic devices

The phase reversal that occurs when light is reflected from a metallic mirror produces a standing wave with reduced intensity near the reflective surface. This effect is highly undesirable in optoelectronic devices that use metal films as both electrical contacts and optical mirrors, because it dictates a minimum spacing between the metal and the underlying active semiconductor layers, therefore posing a fundamental limit to the overall thickness of the device. Here, we show that this challenge can be circumvented by using a metamaterial mirror whose reflection phase is tunable from that of a perfect electric mirror (φ = π) to that of a perfect magnetic mirror (φ = 0). This tunability in reflection phase can also be exploited to optimize the standing wave profile in planar devices to maximize light-matter interaction. Specifically, we show that light absorption and photocurrent generation in a sub-100 nm active semiconductor layer of a model solar cell can be enhanced by ∼20% over a broad spectral band.

Ultrathin, flexible organic-inorganic hybrid solar cells based on silicon nanowires and PEDOT:PSS

Recently, free-standing, ultrathin, single-crystal silicon (c-Si) membranes have attracted considerable attention as a suitable material for low-cost, mechanically flexible electronics. In this paper, we report a promising ultrathin, flexible, hybrid solar cell based on silicon nanowire (SiNW) arrays and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The free-standing, ultrathin c-Si membranes of different thicknesses were produced by KOH etching of double-side-polished silicon wafers for various etching times. The processed free-standing silicon membranes were observed to be mechanically flexible, and in spite of their relatively small thickness, the samples tolerated the different steps of solar cell fabrication, including surface nanotexturization, spin-casting, dielectric film deposition, and metallization. However, in terms of the optical performance, ultrathin c-Si membranes suffer from noticeable transmission losses, especially in the long-wavelength region. We describe the experimental performance of a promising light-trapping scheme in the aforementioned ultrathin c-Si membranes of thicknesses as small as 5.7 μm employing front-surface random SiNW texturization in combination with a back-surface distribution of silver (Ag) nanoparticles (NPs). We report the enhancement of both the short-circuit current density (JSC) and the open-circuit voltage (VOC) that has been achieved in the described devices. Such enhancement is attributable to the plasmonic backscattering effect of the back-surface Ag NPs, which led to an overall 10% increase in the power conversion efficiency (PCE) of the devices compared to similar structures without Ag NPs. A PCE in excess of 6.62% has been achieved in the described devices having a c-Si membrane of thickness 8.6 μm. The described device technology could prove crucial in achieving an efficient, low-cost, mechanically flexible photovoltaic device in the near future.

Plasmonic glasses: optical properties of amorphous metal-dielectric composites

Plasmonic glasses composed of metallic inclusions in a host dielectric medium are investigated for their optical properties. Such structures characterized by short-range order can be easily fabricated using bottom-up, self-organization methods and may be utilized in a number of applications, thus, quantification of their properties is important. We show, using T-Matrix calculations of 1D, 2D, and 3D plasmonic glasses, that their plasmon resonance position oscillates as a function of the particle spacing yielding blue- and redshifts up to 0.3 eV in the visible range with respect to the single particle surface plasmon. Their properties are discussed in light of an analytical model of an average particle's polarizability that originates from a coupled dipole methodology.

Radiative Exchange between Graphitic Nanostructures: A Microscopic Perspective

Electromagnetic radiative heat exchange involving graphene nanostrucrures is studied using an atomistic approach based on the coupled dipole method modified by the fluctuation dissipation theorem. This method includes taking into account many-particle electromagnetic contributions and enables treating two or more nanostructures with nontrivial boundary conditions at different temperatures. We present a microscopic picture of the heat exchange process in graphene nanostructured based systems in terms of a transmission coefficient, characteristic temperature function, and atomic morphology. Our studies provide general pathways of near-field radiation control at the nanoscale.

Deep-subwavelength plasmonic nanoresonators exploiting extreme coupling

A metal-insulator-metal (MIM) waveguide is a canonical structure used in many functional plasmonic devices. Recently, research on nanoresonantors made from finite, that is, truncated, MIM waveguides attracted a considerable deal of interest motivated by the promise for many applications. However, most suggested nanoresonators do not reach a deep-subwavelength domain. With ordinary fabrication techniques the dielectric spacers usually remain fairly thick, that is, in the order of tens of nanometers. This prevents the wavevector of the guided surface plasmon polariton to strongly deviate from the light line. Here, we will show that the exploitation of an extreme coupling regime, which appears for only a few nanometers thick dielectric spacer, can lift this limitation. By taking advantage of atomic layer deposition we fabricated and characterized exemplarily deep-subwavelength perfect absorbers. Our results are fully supported by numerical simulations and analytical considerations. Our work provides impetus on many fields of nanoscience and will foster various applications in high-impact areas such as metamaterials, light harvesting, and sensing or the fabrication of quantum-plasmonic devices.

Self-assembly based plasmonic arrays tuned by atomic layer deposition for extreme visible light absorption

Achieving complete absorption of visible light with a minimal amount of material is highly desirable for many applications, including solar energy conversion to fuel and electricity, where benefits in conversion efficiency and economy can be obtained. On a fundamental level, it is of great interest to explore whether the ultimate limits in light absorption per unit volume can be achieved by capitalizing on the advances in metamaterial science and nanosynthesis. Here, we combine block copolymer lithography and atomic layer deposition to tune the effective optical properties of a plasmonic array at the atomic scale. Critical coupling to the resulting nanocomposite layer is accomplished through guidance by a simple analytical model and measurements by spectroscopic ellipsometry. Thereby, a maximized absorption of light exceeding 99% is accomplished, of which up to about 93% occurs in a volume-equivalent thickness of gold of only 1.6 nm. This corresponds to a record effective absorption coefficient of 1.7 × 10(7) cm(-1) in the visible region, far exceeding those of solid metals, graphene, dye monolayers, and thin film solar cell materials. It is more than a factor of 2 higher than that previously obtained using a critically coupled dye J-aggregate, with a peak width exceeding the latter by 1 order of magnitude. These results thereby substantially push the limits for light harvesting in ultrathin, nanoengineered systems.

Horizontal Silicon Nanowires with Radial p-n Junctions: A Platform for Unconventional Solar Cells

The silicon p-n junction is the most successful solar energy technology to date, yet it accounts for a marginal percentage of worldwide energy production. To change the status quo, a disruptive technological breakthrough is needed. In this Perspective, we discuss the potential for complex silicon nanowires to serve as a platform for next-generation photovoltaic devices. We review the synthesis, electrical characteristics, and optical properties of core/shell silicon nanowires that are subwavelength in diameter and contain radial p-n junctions. We highlight the unique features of these nanowires, such as optical antenna effects that concentrate light and intense built-in electric fields that enable ultrafast charge-carrier separation. We advocate a paradigm in which nanowires are arranged in periodic horizontal arrays to form ultrathin devices. Unlike conventional planar silicon, nanowire structures provide the flexibility to incorporate multiple semiconductor, dielectric, and metallic materials in a single system, providing the foundation for a disruptive, unconventional solar energy technology.

Quantum Dot Solar Cells. The Next Big Thing in Photovoltaics

The recent surge in the utilization of semiconductor nanostructures for solar energy conversion has led to the development of high-efficiency solar cells. Some of these recent advances are in the areas of synthesis of new semiconductor materials and the ability to tune the electronic properties through size, shape, and composition and to assemble quantum dots as hybrid assemblies. In addition, processes such as hot electron injection, multiple exciton generation (MEG), plasmonic effects, and energy-transfer-coupled electron transfer are gaining momentum to overcome the efficiency limitations of energy capture and conversion. The recent advances as well as future prospects of quantum dot solar cells discussed in this perspective provide the basis for consideration as "The Next Big Thing" in photovoltaics.

Tunable localized surface plasmon-enabled broadband light-harvesting enhancement for high-efficiency panchromatic dye-sensitized solar cells

In photovoltaic devices, light harvesting (LH) and carrier collection have opposite relations with the thickness of the photoactive layer, which imposes a fundamental compromise for the power conversion efficiency (PCE). Unbalanced LH at different wavelengths further reduces the achievable PCE. Here, we report a novel approach to broadband balanced LH and panchromatic solar energy conversion using multiple-core-shell structured oxide-metal-oxide plasmonic nanoparticles. These nanoparticles feature tunable localized surface plasmon resonance frequencies and the required thermal stability during device fabrication. By simply blending the plasmonic nanoparticles with available photoactive materials, the broadband LH of practical photovoltaic devices can be significantly enhanced. We demonstrate a panchromatic dye-sensitized solar cell with an increased PCE from 8.3% to 10.8%, mainly through plasmon-enhanced photoabsorption in the otherwise less harvested region of solar spectrum. This general and simple strategy also highlights easy fabrication, and may benefit solar cells using other photoabsorbers or other types of solar-harvesting devices.

The role of magnetic dipoles and non-zero-order Bragg waves in metamaterial perfect absorbers

We develop a simple treatment of a metamaterial perfect absorber (MPA) based on grating theory. We analytically prove that the condition of MPA requires the existence of two currents, which are nearly out of phase and have almost identical amplitude, akin to a magnetic dipole. Furthermore, we show that non-zero-order Bragg modes within the MPA may consume electromagnetic energy significantly.

Synchronized energy and electron transfer processes in covalently linked CdSe-squaraine dye-TiO2 light harvesting assembly

Manipulation of energy and electron transfer processes in a light harvesting assembly is an important criterion to mimic natural photosynthesis. We have now succeeded in sequentially assembling CdSe quantum dot (QD) and squaraine dye (SQSH) on TiO(2) film and couple energy and electron transfer processes to generate photocurrent in a hybrid solar cell. When attached separately, both CdSe QDs and SQSH inject electrons into TiO(2) under visible-near-IR irradiation. However, CdSe QD if linked to TiO(2) with SQSH linker participates in an energy transfer process. The hybrid solar cells prepared with squaraine dye as a linker between CdSe QD and TiO(2) exhibited power conversion efficiency of 3.65% and good stability during illumination with global AM 1.5 solar condition. Transient absorption spectroscopy measurements provided further insight into the energy transfer between excited CdSe QD and SQSH (rate constant of 6.7 × 10(10) s(-1)) and interfacial electron transfer between excited SQSH and TiO(2) (rate constant of 1.2 × 10(11) s(-1)). The synergy of covalently linked semiconductor quantum dots and near-IR absorbing squaraine dye provides new opportunities to harvest photons from selective regions of the solar spectrum in an efficient manner.