Geometric Dependence of the Line Width of Localized Surface Plasmon Resonances

Coaction effect of radiative and non-radiative damping on the lifetime of localized surface plasmon modes in individual gold nanorods

Revealing the coaction effect of radiative and non-radiative damping on the lifetime of the localized surface plasmon resonance (LSPR) mode is a prerequisite for the applications of LSPR. Here, we systematically investigated the coaction effect of radiative and non-radiative damping on the lifetime of the super-radiant and sub-radiant LSPR modes of gold nanorods using time-resolved photoemission electron microscopy (TR-PEEM). The results show that the lifetime of the LSPR mode depends on the length of the gold nanorod, and the different variation behavior of an LSPR mode lifetime exists between the super-radiative mode and the sub-radiative one with the increase of nanorod length (volume). Surprisingly, it is found that the lifetime of the super-radiant LSPR mode can be comparable to or even longer than that of the sub-radiant LSPR mode, instead of the usual claim that a sub-radiant LSPR mode has a longer life than the super-radiant mode. Those TR-PEEM experimental results are supported by finite-difference time-domain simulations and are well explained by the coaction effect with the calculation of the radiative and non-radiative damping rate with the increase of the nanorod volume. We believe that this study is beneficial to build a low-threshold nano-laser and ultrasensitive molecular spectroscopy system.

A 3D Plasmonic Crossed-Wire Nanostructure for Surface-Enhanced Raman Scattering and Plasmon-Enhanced Fluorescence Detection

In this manuscript, silver nanowire 3D random crossed-wire woodpile (3D-RCW) nanostructures were designed and prepared. The 3D-RCW provides rich "antenna" and "hot spot" effects that are responsive for surface-enhanced Raman scattering (SERS) effects and plasmon-enhanced fluorescence (PEF). The optimal construction mode for the 3D-RCW, based on the ratio of silver nanowire and control compound R6G, was explored and established for use in PEF and SERS analyses. We found that the RCW nanochip capable of emission and Raman-enhanced detections uses micro levels of analysis volumes. Consequently, and SERS and PEF of pesticides (thiram, carbaryl, paraquat, fipronil) were successfully measured and characterized, and their detection limits were within 5 μM~0.05 µM in 20 µL. We found that the designed 3D plasmon-enhanced platform cannot only collect the SERS of pesticides, but also enhance the fluorescence of a weak emitter (pesticides) by more than 1000-fold via excitation of the surface plasmon resonance, which can be used to extend the range of a fluorescence biosensor. More importantly, solid-state measurement using a 3D-RCW nanoplatform shows promising potential based on its dual applications in creating large SERS and PEF enhancements.

Improving the quality factors of plasmonic silver cavities for strong coupling with quantum emitters

Plasmonic cavities (PCs) made of metallic nanostructures can concentrate electromagnetic radiation into an ultrasmall volume, where it might strongly interact with quantum emitters. In recent years, there has been much interest in studying such a strong coupling in the limit of single emitters. However, the lossy nature of PCs, reflected in their broad spectra, limits their quality factors and hence their performance as cavities. Here, we study the effect of the adhesion layer used in the fabrication of metal nanostructures on the spectral linewidths of bowtie-structured PCs. Using dark-field microspectroscopy, as well as electron energy loss spectroscopy, it is found that a reduction in the thickness of the chromium adhesion layer we use from 3 nm to 0.1 nm decreases the linewidths of both bright and dark plasmonic modes. We further show that it is possible to fabricate bowtie PCs without any adhesion layer, in which case the linewidth may be narrowed by as much as a factor of 2. Linewidth reduction increases the quality factor of these PCs accordingly, and it is shown to facilitate reaching the strong-coupling regime with semiconductor quantum dots.

Plasmon-Induced Ultrafast Hydrogen Production in Liquid Water

Hydrogen gas production from solar water splitting provides a renewable energy cycle to address the grand global energy challenge; however, its dynamics and fundamental mechanism remain elusive. We directly explore by first-principles the ultrafast electron-nuclear quantum dynamics on the time scale of ∼100 fs during water photosplitting on a plasmonic cluster embedded in liquid water. Water molecule splitting is assisted by rapid proton transport in liquid water in a Grotthuss-like mechanism. We identify that a plasmon-induced field enhancement effect dominates water splitting, while charge transfer from gold to the antibonding orbital of a water molecule also plays an important role. "Chain-reaction" like rapid H₂ production is observed via the combination of two hydrogen atoms from different water molecules. These results provide a route toward a complete understanding of water photosplitting in the ultimate time and spatial limit.

Dispersive Plasmon Damping in Single Gold Nanorods by Platinum Adsorbates

Surface modifications of plasmonic nanoparticles with metal adsorbates are essential in applications such as plasmonic sensing, plasmon-enhanced photocatalysis, etc., where spectral broadening is usually observed. A single particle study is presented on plasmon damping by adsorption of platinum (Pt) clusters. Single particle dark-field spectroscopy is employed to measure exactly the same gold nanorod before and after the Pt adsorption. The Pt-induced plasmon damping in terms of linewidth increase is found dependent on the resonance wavelength of the measured nanorod, which is dispersive in nature. The measured dispersion generally matches the theoretical prediction, and it basically exhibits a gradual increase with decreasing resonance energy. This increase can be attributed to the fact that the nanorod as a better resonator is more susceptible to the Pt adsorption than the spherical particles. Moreover, simulated results based on discrete dipole approximation method further indicate that the damping is mainly contributed from the adsorbates on the ends of the nanorod and independent on the type of the metal adsorbed. Knowledge and insights gained in this study can be very important for the design and fabrication of plasmonic heterostructures as functional nanomaterials.

Tailoring plasmonic properties of gold nanohole arrays for surface-enhanced Raman scattering

The wide plasmonic tuning range of nanotriangle and nanohole array patterns fabricated by nanosphere lithography makes them promising in surface-enhanced Raman scattering (SERS) sensors. Unfortunately, it is challenging to optimize these patterns for SERS sensing because their optical response is a complex mixture of localized surface plasmon resonance (SPR) and propagating surface plasmon polariton (SPP). In this paper, transmission and reflection measurements are combined with finite difference time domain simulations to identify and separate each plasmonic mode, discerning which resonance leads to the electromagnetic field enhancement. The SERS enhancement is found to be dominated by the absorption, which is shifted from the transmission and reflection dips usually used as tuning points, and by the 'gap' defects formed within the pattern. These effects have different spectral and geometric dependences, forming two optimization curves which can be used to predict the best performance for a given excitation wavelength. The developed model is verified with experimental SERS measurements for several nanohole sizes and periodicities, and then used to give optimal fabrication parameters for a range of measurement conditions. The results will promote the application of two-dimensional plasmonic nanoarrays in SERS sensors.

Progress and Perspectives of Plasmon-Enhanced Solar Energy Conversion

Plasmonics allows extraordinary control of light, making it attractive for application in solar energy harvesting. In metal-semiconductor heterojunctions, plasmons can enhance photoconversion in the semiconductor via three mechanisms, including light trapping, hot electron/hole transfer, and plasmon-induced resonance energy transfer (PIRET). To understand the plasmonic enhancement, the metal's geometry, constituent metal, and interface must be viewed in terms of the effects on the plasmon's dephasing and decay route. To simplify design of plasmonic metal-semiconductor heterojunctions for high-efficiency solar energy conversion, the parameters controlling the plasmonic enhancement can be distilled to the dephasing time. The plasmonic geometry can then be further refined to optimize hot carrier transfer, PIRET, or light trapping.

Pronounced Linewidth Narrowing of an Aluminum Nanoparticle Plasmon Resonance by Interaction with an Aluminum Metallic Film

Aluminum nanocrystals and fabricated nanostructures are emerging as highly promising building blocks for plasmonics in the visible region of the spectrum. Even at the individual nanocrystal level, however, the localized plasmons supported by Al nanostructures possess a surprisingly broad spectral response. We have observed that when an Al nanocrystal is coupled to an underlying Al film, its dipolar plasmon resonance linewidth narrows remarkably and shows an enhanced scattering efficiency. This behavior is observable in other plasmonic metals, such as gold; however, it is far more dramatic in the aluminum nanoparticle-film system, reducing the dipolar plasmon linewidth by more than half. A substrate-mediated hybridization of the dipolar and quadrupolar plasmons of the nanoparticle reduces the radiative losses of the dipolar plasmon. While this is a general effect that applies to all metallic nanoparticle-film systems, this finding specifically provides a new mechanism for narrowing plasmon resonances in aluminum-based systems, quite possibly expanding the potential of Al-based plasmonics in real-world applications.

Plasmon-enhanced optical sensors: a review

Surface plasmon resonance (SPR) has found extensive applications in chemi-sensors and biosensors. Plasmons play different roles in different types of optical sensors. SPR transduces a signal in a colorimetric sensor through shifts in the spectral position and intensity in response to external stimuli. SPR can also concentrate the incident electromagnetic field in a nanostructure, modulating fluorescence emission and enabling plasmon-enhanced fluorescence to be used for ultrasensitive detection. Furthermore, plasmons have been extensively used for amplifying a Raman signal in a surface-enhanced Raman scattering sensor. This paper presents a review of recent research progress in plasmon-enhanced optical sensing, giving emphasis on the physical basis of plasmon-enhanced sensors and how these principles guide the design of sensors. In particular, this paper discusses the design strategies for nanomaterials and nanostructures to plasmonically enhance optical sensing signals, also highlighting the applications of plasmon-enhanced optical sensors in healthcare, homeland security, food safety and environmental monitoring.