Investigation of phase separation behavior and formation of plasmonic nanocomposites from polypeptide-gold nanorod nanoassemblies

An Engineered Protein-Au Bioplaster for Efficient Skin Tumor Therapy

Melanoma is the most lethal malignancy in skin cancer and may occur at any site and express melanocytes. Due to malignant melanoma's invasion and migration nature, conventional therapies make it challenging to remove the whole tumor tissue while undertaking the high risks of tumor recurrence. Regarding the emerging targeted therapies and immunotherapy, drug resistance and low immunotherapeutic activity remain significant challenges. It is thus becoming urgently important to develop alternative strategies for melanoma therapy. Herein, a novel bifunctional protein-based photothermal bioplaster (PPTB) is developed for non-invasive tumor therapy and skin tissue regeneration. The complexation of adhesive protein and gold nanorods (GNRs) endow the obtained PPTB with good biocompatibility, controllable near-infrared (NIR) light-mediated adhesion performance, and high photothermal performance. Therefore, the PPTB bioagent facilitates skin adhesion and effectively transfers heat from skin to tumor. This behavior endows PPTB capability to eradicate skin tumors conveniently. Thus, the assembly strategy enables this hybrid bioplaster to hold great potential for skin-related tumor treatment.

Solid-Binding Proteins: Bridging Synthesis, Assembly, and Function in Hybrid and Hierarchical Materials Fabrication

There is considerable interest in the development of hybrid organic-inorganic materials because of the potential for harvesting the unique capabilities that each system has to offer. Proteins are an especially attractive organic component owing to the high amount of chemical information encoded in their amino acid sequence, their amenability to molecular and computational (re)design, and the many structures and functions they specify. Genetic installation of solid-binding peptides (SBPs) within protein frameworks affords control over the position and orientation of adhesive and morphogenetic segments, and a path toward predictive synthesis and assembly of functional materials and devices, all while harnessing the built-in properties of the host scaffold. Here, we review the current understanding of the mechanisms through which SBPs bind to technologically relevant interfaces, with an emphasis on the variables that influence the process, and highlight the last decade of progress in the use of solid-binding proteins for hybrid and hierarchical materials synthesis.

Short elastin-like peptide-functionalized gold nanoparticles that are temperature responsive under near-physiological conditions

Thermally-responsive, short elastin-like peptides (ELPs) of sequence VPGVG (V, P and G represent valine, proline and glycine respectively), bearing different N-terminal functional groups (amino-, N-acetyl and thiol) and a non-ionisable C-terminal group, were prepared by solid phase synthesis. The conformation and aggregation properties of the ELPs were studied in different pH aqueous buffer solutions using UV-vis spectroscopy and circular dichroism (CD). The thiol-capped ELPs were used to prepare functionalized gold nanoparticles (GNPs), which were found to undergo thermally-triggered reversible aggregation at 40 °C. The peptide conformation and nanoparticle aggregation behaviour of the ELP-GNPs in aqueous solution were investigated by transmission electron microscopy (TEM), circular dichroism (CD) and UV-vis spectroscopy. It was found that the ELP-GNP conjugates were capable of reversible, thermally triggered aggregation at near-physiological temperatures (transition temperature of 40 °C at pH = 7.4), opening up applications in photothermal cancer therapy and diagnosis.

Spatiotemporal modeling of laser tissue soldering using photothermal nanocomposites

OBJECTIVE

Laser tissue soldering using photothermal solders is a technology that facilitates rapid sealing using heat-induced changes in the tissue and the solder material. The solder material is made of gold nanorods embedded in a protein matrix patch that can be placed over the tissue rupture site and heated with a laser. Although laser tissue soldering is an attractive approach for surgical repair, potential photothermal damage can limit the success of this approach. Development of predictive mathematical models of photothermal effects including cell death, can lead to more efficient approaches in laser-based tissue repair.

METHODS

We describe an experimental and modeling investigation into photothermal solder patches for sealing porcine and mouse cadaver intestine sections using near-infrared laser irradiation. Spatiotemporal changes in temperature were determined at the surface as well as various depths below the patch. A mathematical model, based on the finite element method, predicts the spatiotemporal temperature distribution in the patch and surrounding tissue, as well as concomitant cell death in the tissue is described.

RESULTS

For both the porcine and mouse intestine systems, the model predicts temperatures that are quantitatively similar to the experimental measurements with the model predictions of temperature increase often being within a just a few degrees of experimental measurements.

CONCLUSION

This mathematical model can be employed to identify optimal conditions for minimizing healthy cell death while still achieving a strong seal of the ruptured tissue using laser soldering. Lasers Surg. Med. 50:143-152, 2018. © 2017 Wiley Periodicals, Inc.

On/off-switchable LSPR nano-immunoassay for troponin-T

Regeneration of immunosensors is a longstanding challenge. We have developed a re-usable troponin-T (TnT) immunoassay based on localised surface plasmon resonance (LSPR) at gold nanorods (GNR). Thermosensitive poly(N-isopropylacrylamide) (PNIPAAM) was functionalised with anti-TnT to control the affinity interaction with TnT. The LSPR was extremely sensitive to the dielectric constant of the surrounding medium as modulated by antigen binding after 20 min incubation at 37 °C. Computational modelling incorporating molecular docking, molecular dynamics and free energy calculations was used to elucidate the interactions between the various subsystems namely, IgG-antibody (c.f., anti-TnT), PNIPAAM and/or TnT. This study demonstrates a remarkable temperature dependent immuno-interaction due to changes in the PNIPAAM secondary structures, i.e., globular and coil, at above or below the lower critical solution temperature (LCST). A series of concentrations of TnT were measured by correlating the λ_LSPR shift with relative changes in extinction intensity at the distinct plasmonic maximum (i.e., 832 nm). The magnitude of the red shift in λ_LSPR was nearly linear with increasing concentration of TnT, over the range 7.6 × 10⁻¹⁵ to 9.1 × 10⁻⁴ g/mL. The LSPR based nano-immunoassay could be simply regenerated by switching the polymer conformation and creating a gradient of microenvironments between the two states with a modest change in temperature.

Stimuli-Responsive Genetically Engineered Polymer Hydrogel Demonstrates Emergent Optical Responses

Biopolymer-based optical hydrogels represent an emerging class of materials with potential applications in biocompatible integrated optoelectronic devices, bioimaging applications, and stretchable/flexible photonics. We have synthesized stimuli-responsive three-dimensional hydrogels from genetically engineered elastin-like polymers (ELPs) and have loaded these hydrogels with an amine-containing p-phenylenevinylene oligomer (OPPV) derivative featuring highly tunable, environmentally sensitive optical properties. The composite ELP/OPPV hydrogels exhibit both pH- and temperature-dependent fluorescence emission, from which we have characterized a unique optical behavior that emerged from OPPV within the hydrogel environment. By systematic comparison with free OPPV in solution, our results suggest that this distinct behavior is due to local electronic effects arising from interactions between the hydrophobic ELP microenvironment and the nonprotonated OPPV species at pH 7 or higher.

A near-infrared light-controlled system for reversible presentation of bioactive ligands using polypeptide-engineered functionalized gold nanorods

A near-infrared light-controlled hybrid platform with polypeptide-engineered functionalized gold nanorods has been designed for reversible presentation of the immobilized ligands to cell surface receptors on the engineered materials.

Recovery and redispersion of gold nanoparticles using the self-assembly of a pH sensitive zwitterionic amphiphile

The pH-responsive self-assembly of a zwitterionic amphiphile was expanded to the recovery of gold (Au) nanoparticles. Multilayered lamellae were incorporated into the nanoparticles. Redispersion of nanoparticles was achieved by the transition of self-assembly based on pH.

Generation of polypeptide-templated gold nanoparticles using ionizing radiation

Ionizing radiation, including γ rays and X-rays, are high-energy electromagnetic radiation with diverse applications in nuclear energy, astrophysics, and medicine. In this work, we describe the use of ionizing radiation and cysteine-containing elastin-like polypeptides (C(n)ELPs, where n = 2 or 12 cysteines in the polypeptide sequence) for the generation of gold nanoparticles. In the presence of C(n)ELPs, ionizing radiation doses higher than 175 Gy resulted in the formation of maroon-colored gold nanoparticle dispersions, with maximal absorbance at 520 nm, from colorless metal salts. Visible color changes were not observed in any of the control systems, indicating that ionizing radiation, gold salt solution, and C(n)ELPs were all required for nanoparticle formation. The hydrodynamic diameters of nanoparticles, determined using dynamic light scattering, were in the range of 80-150 nm, while TEM imaging indicated the formation of gold cores 10-20 nm in diameter. Interestingly, C2ELPs formed 1-2 nm diameter gold nanoparticles in the absence of radiation. Our results describe a facile method of nanoparticle formation in which nanoparticle size can be tailored based on radiation dose and C(n)ELP type. Further improvements in these polypeptide-based systems can lead to colorimetric detection of ionizing radiation in a variety of applications.

Laser welding of ruptured intestinal tissue using plasmonic polypeptide nanocomposite solders

Approximately 1.5 million people suffer from colorectal cancer and inflammatory bowel disease in the United States. Occurrence of leakage following standard surgical anastomosis in intestinal and colorectal surgery is common and can cause infection leading to life-threatening consequences. In this report, we demonstrate that plasmonic nanocomposites, generated from elastin-like polypeptides (ELPs) cross-linked with gold nanorods, can be used to weld ruptured intestinal tissue upon exposure to near-infrared (NIR) laser irradiation. Mechanical properties of these nanocomposites can be modulated based on the concentration of gold nanorods embedded within the ELP matrix. We employed photostable, NIR-absorbing cellularized and noncellularized GNR-ELP nanocomposites for ex vivo laser welding of ruptured porcine small intestines. Laser welding using the nanocomposites significantly enhanced the tensile strength, leakage pressure, and bursting pressure of ruptured intestinal tissue. This, in turn, provided a liquid-tight seal against leakage of luminal liquid from the intestine and resulting bacterial infection. This study demonstrates the utility of laser tissue welding using plasmonic polypeptide nanocomposites and indicates the translational potential of these materials in intestinal and colorectal repair.