Magnetic manipulation and optical imaging of an active plasmonic single-particle Fe-Au nanorod

Passive and Active Microrheology for Biomedical Systems

Microrheology encompasses a range of methods to measure the mechanical properties of soft materials. By characterizing the motion of embedded microscopic particles, microrheology extends the probing length scale and frequency range of conventional bulk rheology. Microrheology can be characterized into either passive or active methods based on the driving force exerted on probe particles. Tracer particles are driven by thermal energy in passive methods, applying minimal deformation to the assessed medium. In active techniques, particles are manipulated by an external force, most commonly produced through optical and magnetic fields. Small-scale rheology holds significant advantages over conventional bulk rheology, such as eliminating the need for large sample sizes, the ability to probe fragile materials non-destructively, and a wider probing frequency range. More importantly, some microrheological techniques can obtain spatiotemporal information of local microenvironments and accurately describe the heterogeneity of structurally complex fluids. Recently, there has been significant growth in using these minimally invasive techniques to investigate a wide range of biomedical systems both in vitro and in vivo. Here, we review the latest applications and advancements of microrheology in mammalian cells, tissues, and biofluids and discuss the current challenges and potential future advances on the horizon.

Scattering Fourier Transform Biosensor: Binary Mixture Consisting of Magnetic Ni Nanorings and Plasmonic Au Nanorods

We report a biosensing platform based on a binary mixture comprised of Au nanorods (plasmonic nanoparticles, Au NRs) and magnetically responsive Pt@Ni nanorings (magnetic nanostirrers, MN-rings). The mixture of Au NRs and MN-rings was modulated with an external rotating magnetic field (a dynamic assay with magnetic perturbation), which led to fluctuating extinction in the UV-vis spectroscopy measurement. As the surfaces of Au NRs were modified with antigens and antibodies, their periodic profile of extinction changed in accordance with surface modification of the Au NRs. The obtained periodic extinction with time could be converted to a frequency domain function where the signal-to-noise ratios of the peaks were evaluated to monitor surface biorecognitions on Au NRs, which is in contrast to conventional biosensors (a stagnant assay without perturbation) that use only the peak shift of localized surface plasmon resonance of Au nanoparticles.

A Review on Optoelectrokinetics-Based Manipulation and Fabrication of Micro/Nanomaterials

Optoelectrokinetics (OEK), a fusion of optics, electrokinetics, and microfluidics, has been demonstrated to offer a series of extraordinary advantages in the manipulation and fabrication of micro/nanomaterials, such as requiring no mask, programmability, flexibility, and rapidness. In this paper, we summarize a variety of differently structured OEK chips, followed by a discussion on how they are fabricated and the ways in which they work. We also review how three differently sized polystyrene beads can be separated simultaneously, how a variety of nanoparticles can be assembled, and how micro/nanomaterials can be fabricated into functional devices. Another focus of our paper is on mask-free fabrication and assembly of hydrogel-based micro/nanostructures and its possible applications in biological fields. We provide a summary of the current challenges facing the OEK technique and its future prospects at the end of this paper.

Multisegmented Metallic Nanorods: Sub-10 nm Growth, Nanoscale Manipulation, and Subwavelength Imaging

Multisegmented metallic nanorods (MS-M-NRs) have attracted increasing attention thanks to their integrated structures and complex functions. The integration of nanoscale segments in 1D enables maximum exposure of each segment and enhanced interaction between adjacent segments. Such structural integration will induce functional complexity in the nanorods, leading to superior properties for the individual components. Herein, recent progress on the development of MS-M-NRs is reviewed. Their precise fabrication, nanoscale manipulation, and subwavelength imaging, as well as simultaneous manipulation and imaging are discussed, respectively. Specifically, precise fabrication of MS-M-NRs focuses on porous anodic alumina (PAA) templated electrodeposition, which enables sub-10 nm growth of the segments and their interfaces/fronts. Nanoscale manipulation of MS-M-NRs introduces the fundamental methods that are employed for delicate movement control on the nanorods through internal or external stimulations. Subwavelength imaging of MS-M-NRs highlights the achievements on identification and location of constituent nanoscale segments/gaps based on their differences and interactions. Simultaneous manipulation and imaging of MS-M-NRs addresses the significance and potential applications of the nanorods with magnetic-plasmonic dual modulation. The development of MS-M-NRs will greatly contribute to materials science and nanoscience/nanotechnology.

Robust Assembly of Colloidal Nanoparticles for Controlled-Reflectance Surface Construction

Controlled placement of nanoscale particles with nanometer precision on substrates/surfaces is highly desired toward functional nanodevices. Herein, we report the robust assembly of colloidal nanoparticles onto nanostructured aluminum surfaces. The surfaces are configured by porous anodic alumina (PAA) membranes on top of textured aluminum substrates. Capillary force and geometry confinement enable rapid and precise transfer of colloidal nanoparticles from solutions into PAA templates. Such top-down control of bottom-up assembly demonstrates large-area (>1 × 1 cm²) integration of nanoscale particles with exceedingly high yield (>95%) and exceptionally high density (>10¹⁰ particles/cm²). The plasmonic coupling between gold nanoparticles and aluminum surfaces, as well as between adjacent nanoparticles, is responsible for the unique reflectance from the assembled surfaces. The reflectance minimum (resonant absorption) can be readily shifted from visible to near-infrared by simple structural variation. The apparent surface colors are thus broadly manipulated. Our work offers a straightforward platform toward construction of surfaces with controlled reflectance.

Biomechanical Characterization at the Cell Scale: Present and Prospects

The rapidly growing field of mechanobiology demands for robust and reproducible characterization of cell mechanical properties. Recent achievements in understanding the mechanical regulation of cell fate largely rely on technological platforms capable of probing the mechanical response of living cells and their physico–chemical interaction with the microenvironment. Besides the established family of atomic force microscopy (AFM) based methods, other approaches include optical, magnetic, and acoustic tweezers, as well as sensing substrates that take advantage of biomaterials chemistry and microfabrication techniques. In this review, we introduce the available methods with an emphasis on the most recent advances, and we discuss the challenges associated with their implementation.

Linear self-assembly and grafting of gold nanorods into arrayed micrometer-long nanowires on a silicon wafer via a combined top-down/bottom-up approach

Macroscopically long wire-like arrangements of gold nanoparticles were obtained by controlled evaporation and partial coalescence of an aqueous colloidal solution of capped CTAB-Au nanorods onto a functionalised 3-mercaptopropyl trimethoxysilane (MPTMS) silicon substrate, using a removable, silicon wafer with a hydrophobic surface that serves as a "handrail" for the initial nanorods' linear self-assembly. The wire-like structures display a quasi-continuous pattern by thermal annealing of the gold nanorods when the solvent (i.e. water) is evaporated at temperatures rising from 20°C to 140°C. Formation of both single and self-replicating parallel 1D-superstructures consisting of two or even three wires is observed and explained under such conditions.

Fourier Transform Surface Plasmon Resonance (FTSPR) with Gyromagnetic Plasmonic Nanorods

An unprecedented active and dynamic sensing platform based on a LSPR configuration that is modulated by using an external magnetic field is reported. Electrochemically synthesized Au/Fe/Au nanorods exhibited plasmonically active behavior through plasmonic coupling, and the middle ferromagnetic Fe block responded to a magnetic impetus, allowing the nanorods to be modulated. The shear force variation induced by the specific binding events between antigens and antibodies on the nanorod surface is used to enhance the sensitivity of detection of antigens in the plasmonics-based sensor application. As a proof-of-concept, influenza A virus (HA1) was used as a target protein. The limit of detection was enhanced by two orders of magnitude compared to that of traditional LSPR sensing.

Bio-Nano-Magnetic Materials for Localized Mechanochemical Stimulation of Cell Growth and Death

Magnetic nanoparticles are promising new tools for therapeutic applications, such as magnetic nanoparticle hyperthermia therapy and targeted drug delivery. Recent in vitro studies have demonstrated that a force application with magnetic tweezers can also affect cell fate, suggesting a therapeutic potential for magnetically modulated mechanical stimulation. The magnetic properties of nanoparticles that induce physical responses and the subtle responses that result from mechanically induced membrane damage and/or intracellular signaling are evaluated. Magnetic particles with various physical, geometric, and magnetic properties and specific functionalization can now be used to apply mechanical force to specific regions of cells, which permit the modulation of cellular behavior through the use of spatially and time controlled magnetic fields. On one hand, mechanochemical stimulation has been used to direct the outgrowth on neuronal growth cones, indicating a therapeutic potential for neural repair. On the other hand, it has been used to kill cancer cells that preferentially express specific receptors. Advances made in the synthesis and characterization of magnetic nanomaterials and a better understanding of cellular mechanotransduction mechanisms may support the translation of mechanochemical stimulation into the clinic as an emerging therapeutic approach.

Recent advances in noble metal based composite nanocatalysts: colloidal synthesis, properties, and catalytic applications

This Review article provides a report on progress in the synthesis, properties and catalytic applications of noble metal based composite nanomaterials. We begin with a brief discussion on the categories of various composite materials. We then present some important colloidal synthetic approaches to the composite nanostructures; here, major attention has been paid to bimetallic nanoparticles. We also introduce some important physiochemical properties that are beneficial from composite nanomaterials. Finally, we highlight the catalytic applications of such composite nanoparticles and conclude with remarks on prospective future directions.

Mechanochemical stimulation of MCF7 cells with rod-shaped Fe-Au Janus particles induces cell death through paradoxical hyperactivation of ERK

Multifunctional nanoparticles that actively target-specific tissues are studied for cancer diagnosis and treatment. Magnetically and optically active particles are of particular interest because they enable multiple imaging modalities and physically modulated therapies, such as magnetic hyperthermia. Fe-Au nanorods are synthesized that have a long iron segment, coated with polyethylene glycol, and a short gold tip functionalized with heregulin (HRG), a known ligand of ErbB family of receptors. HRG-nanorods preferentially target MCF7 cells relative to MDA-MB-231 cells, as demonstrated in a novel microfluidics device. Targeting rates of these classical breast cancer cells correlate with their differential expression of ErbB2/3 receptors. HRG-nanorod binding stimulates the extracellular signal-regulated kinase 1/2 (ERK) phosphorylation in MCF7 cells. The increase in ERK phosphorylation is linked to "active zones," dynamic regions in the cell periphery, which exhibit higher rates of particle binding than the rest of the cell. Periodically stretching cells using magnetic tweezers further activates ERK, which leads to cell death in cells co-treated with B-Raf inhibitors, through ERK hyperactivation. Although to a lesser extent, cell death is also achieved through magnetic hyperthermia. These results demonstrate nanoscale targeting and localized mechanochemical treatment of specific cancer cell lines based on their receptor expression using multifunctional nanoparticles.

Plasmonic enhancement of dye sensitized solar cells via a tailored size-distribution of chemically functionalized gold nanoparticles

A substantial and stable increase of the current density J_sc of ruthenium (Ru) dye sensitized solar cells (DSC) of up to 16.18% and of the power efficiency of up to 25.5% is demonstrated in this article via plasmonic enhancement. The key aspect of this work is the use of a tailored bimodal size distribution of functionalized gold nanoparticles (AuNPs) that have been chemically immobilized onto the mesoporous titanium dioxide (TiO₂) layer via short, stable dithiodibutyric acid linkers. The size distribution of the AuNPs is a result of theoretical calculations that aimed at the perfection of the absorption characteristics of the complete solar cell system over a wide range of wavelengths. The functionalization of the AuNPs serves to bind them at a close but defined distance to TiO₂-particles and additionally to chemically protect them against potential corrosion by the electrolyte. Simulations of near field (enhanced absorption) and far field (scattering) contributions have been used to tailor a complex AuNPs bimodal size distribution that had subsequently demonstrated experimentally a close to optimum improvement of the absorbance over a wide wavelength range (500–675 nm) and therefore an impressive DSC efficiency enhancement. Finally, the modified DSCs are exhibiting pronounced longevity and stable performance as confirmed via long time measurements. In summary, the presented systems show increased performance compared to non plasmonic enhanced cells with otherwise identical composition, and are demonstrating a previously unpublished longevity for iodide electrolyte/AuNPs combinations.

Drug loaded multilayered gold nanorods for combined photothermal and chemotherapy

In this study, gold nanorods (AuNRs) were first stabilized by hexadecyltrimethylammonium bromide (CTAB) and then coated with two kinds of polyelectrolytes (PE) and BSA to obtain multi-layered AuNRs (AuNRs-PE-BSA). Furthermore, the anti-cancer drug doxorubicin (DOX) was encapsulated into AuNRs-PE-BSA by the electrostatic force and the nanocomposites formed were named AuNRs/DOX-PE-BSA. The success of coating was verified by transmission electron microscopy (TEM), zeta potential, gel-electrophoresis and thermogravimetric analysis (TGA). The MTT assay indicated that the cytotoxicity of AuNRs decreased dramatically after multi-layer capping. The time-dependent nucleus-targeting capability of AuNRs/DOX-PE-BSA was confirmed in cell affinity evaluations. The in vitro and in vivo experiments demonstrated that AuNRs/DOX-PE-BSA, which combined photothermal and chemotherapy for tumor therapy, bears a markedly improved curative effect and holds promising prospects in the field of nanomedicine.

In vitro study of the interaction of heregulin-functionalized magnetic–optical nanorods with MCF7 and MDA-MB-231 cells

Multifunctional nanoparticles that actively target specific cells are promising tools for cancer diagnosis and therapy. In this article we review the synthesis and surface chemistry of Fe–Au nanorods and their characterization using microscopy. The diameter of the rods used in this study was selected to be 150–200 nm so that they did not enter the cells. The 80 nm-long Au tips of the nanorods were functionalized with heregulin (HRG), and the micron-long Fe portion was coated with a poly(ethylene glycol) monolayer to minimize non-specific interactions. Nanorods functionalized with HRG were found to preferentially bind to MCF7 cells that express high levels of the receptor tyrosine-protein kinase ErbB2/3. Magnetic tweezers measurements were used to characterize the kinetic properties of the bond between the HRG on the rods and ErbB2/3 on the surface of the cells. The strong magnetization of Fe–Au nanorods makes them excellent candidates for in-vitro and in-vivo imaging, and magnetic therapeutic applications targeting cancer cells in circulation.

Pituitary adenoma biomarkers identified using proteomic fingerprint technology

OBJECTIVE

To determine whether pituitary adenomas can be diagnosed by identifying protein biomarkers in the serum.

METHODS

We compared serum proteins from 65 pituitary adenoma patients and 90 healthy donors using proteomic fingerprint technology combining magnetic beads with matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS).

RESULTS

A total of 42 M/Z peaks were identified as related to pituitary adenoma (P<0.01). A diagnostic model established based on three biomarkers (3382.0, 4601.9, 9191.2) showed that the sensitivity of diagnosing pituitary adenoma was 90.0% and the specificity was 88.3%. The model was further tested by blind analysis showing that the sensitivity was 88.0% and the specificity was 83.3%.

CONCLUSIONS

These results suggest that proteomic fingerprint technology can be used to identify pituitary adenoma biomarkers and the model based on three biomarkers (3382.0, 4601.9, 9191.2) provides a powerful and reliable method for diagnosing pituitary adenoma.

Highly ordered Fe-Au heterostructured nanorod arrays and their exceptional near-infrared plasmonic signature

The potential of highly ordered array nanostructures in sensing applications is well recognized, particularly with the ability to define the structural composition and arrangement of the individual nanorods accurately. The use of heterogeneous nanostructures generates an additional degree of freedom, which can be used to tailor the optical response of such arrays. In this article, we report on the fabrication and characterization of well-defined Fe-Au bisegmented nanorod arrays in a repeating hexagonal arrangement. Through an asymmetric etching method, free-standing Fe-Au nanorod arrays on a gold-coated substrate were produced with an inter-rod spacing of 26 nm. This separation distance renders the array capable of sustaining resonant electromagnetic wave coupling between individual rods. Owing to this coupling, the subwavelength arrangement, and the structural heterogeneity, the nanorod arrays exhibit unique plasmonic responses in the near-infrared (NIR) range. Enhanced sensitivity in this spectral region has not been identified for gold-only nanorods of equivalent dimensions. The NIR response offers confirmation of the potential of these highly ordered, high-density arrays for biomedical relevant applications, such as subcutaneous spectroscopy and biosensing.