New organogels based on an anthracene derivative with one urea group and its photodimer: fluorescence enhancement after gelation

Mechanism of High Hydrocarbon-Fuel-Gelation Performance of Ultralow-Concentration Bis-urea-Based Gellants

Bis-urea-based gellants have garnered considerable attention due to their capacity to form all kinds of gels in solvents for multiple applications. Nevertheless, the range of applicable solvents is limited, and the synthesis process is complicated. Herein, we report a one-step synthesis process of bis-urea-based gellants (Bu(n)) for gelling nonpolar organic solvents, including high-energy fuels. Importantly, the critical gelation concentration (CGC) of Bu(n) decreases with the increase of alkyl chain length, and that of Bu18 is lower than 0.1 wt % in various hydrocarbon fuels. The discrepant gelation performance of gellants in solvents was investigated by molecular dynamics simulation and spectral characterizations. The results indicate that the electrostatic interaction between urea groups is vital to constructing a gellant framework, and the wide van der Waals (vdW) surface provided by alkyl groups helps to immobilize solvents. The nonbonding interactions between gellant molecules facilitate the formation of a 3D fibrous network structure, which further accumulates into a cambium layer structure. Due to the excellent gelation performance of gellants in fuels, the gel fuels perform the rheological characteristics of shear thinning and thixotropic recovering with calorific value remaining, thus demonstrating potential for application.

L-Cysteine/Silver Nitrate/Iodate Anions System: Peculiarities of Supramolecular Gel Formation with and Without Visible-Light Exposure

In this study, novel anion photo-responsive supramolecular hydrogels based on cysteine-silver sol (CSS) and iodate anions (IO3-) were prepared. The peculiarities of the self-assembly process of gel formation in the dark and under visible-light exposure were studied using a complex of modern physico-chemical methods of analysis, including viscosimetry, UV spectroscopy, dynamic light scattering, electrophoretic light scattering, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. In the dark phase, the formation of weak snot-like gels takes place in a quite narrow IO3- ion concentration range. The visible-light exposure of these gels leads to an increase in their viscosity and dramatic change in their color. The morphology of gels alters after light irradiation that is reflected in the formation of a huge number of spherical/elliptical particles and the thickening of the fibers of the gel network. The interaction of CSS with IO3- anions has features of a redox process, which leads to the formation of silver iodide/silver oxide nanoparticles inside and on the surface of CSS particles. CSS possesses selectivity only to IO3- anions compared to many other inorganic ions relevant for humans and the environment. Thus, the CSS/IO3- system is non-trivial and can be considered as a novel low-molecular-weight gelator with photosensitive properties, as another way to produce silver iodide nanoparticles, and as a new approach for IO3- ion detection.

Force-, heat- and acid-induced fluorescent switching properties of an anthracene-based hydrazide derivative

A novel anthracene-based hydrazide derivative (3,4-ENS) was designed and synthesized, and 3,4-ENS can form stable organogel in dimethyl sulfoxide (DMSO) solvent. Firstly, 3,4-ENS xerogel from DMSO exhibits mechanofluorochromic property and its maximum emission shifts from 433 nm to 484 nm upon grinding. Secondly, DMSO xerogel exhibits thermofluorochromic behavior and its maximum emission shifts from 433 nm to 481 nm upon heating at 110 °C. Thirdly, DMSO xerogel exhibits acidofluorochromic behavior and its maximum emission shifts from 433 nm to 466 nm upon fuming by TFA vapors. The experimental results confirmed that the different luminescent property of 3,4-ENS attributed to the phase transition from well-ordered crystals to metastable disordered aggregation.

Stimuli responsive dynamic transformations in supramolecular gels

Supramolecular gels are formed by the self-assembly of small molecules under the influence of various non-covalent interactions. As the interactions are individually weak and reversible, it is possible to perturb the gels easily, which in turn enables fine tuning of their properties. Synthetic supramolecular gels are kinetically trapped and usually do not show time variable changes in material properties after formation. However, such materials potentially become switchable when exposed to external stimuli like temperature, pH, light, enzyme, redox, and chemical analytes resulting in reconfiguration of gel matrix into a different type of network. Such transformations allow gel-to-gel transitions while the changes in the molecular aggregation result in alteration of physical and chemical properties of the gel with time. Here, we discuss various methods that have been used to achieve gel-to-gel transitions by modifying a pre-formed gel material through external perturbation. We also describe methods that allow time-dependent autonomous switching of gels into different networks enabling synthesis of next generation functional materials. Dynamic modification of gels allows construction of an array of supramolecular gels with various properties from a single material which eventually extend the limit of applications of the gels. In some cases, gel-to-gel transitions lead to materials that cannot be accessed directly. Finally, we point out the necessity and possibility of further exploration of the field.

Stimuli-responsive behavior of naphthyl acylhydrazone derivative and its application in information security protection

Acylhydrazone derivatives containing naphthyl group, namely, 3,5-bis-octyloxy-benzoic acid naphthalen-1-ylmethylene-hydrazide (NTH-mB8) and 4-methoxy-benzoic acid naphthalen-1-ylmethylene-hydrazide (NTH-P1) were synthesized. π-π interactions between naphthalene groups and -N-H···O=C- intermolecular hydrogen bondings were observed in NTH-P1 single crystal, in which -C=N- bonds exhibited trans-isomer. NTH-mB8 showed photo-responsive behavior due to photo-induced trans-cis isomerizations of -C=N- bonds. Interestingly, the NTH-mB8 films fumed by trifluoroacetic acid (TFA)/triethylamine (TEA) (or standing at room temperature) vapors show reversible fluorescence on/off switching property. The cast film of NTH-mB8 exhibited almost no fluorescence. The NTH-mB8 film fumed by TFA vapor exhibited intensive cyan emission, which was quickly quenched by TEA vapor. The reversible remarkable fluorescence on/off switching properties suggested that the organic solution of NTH-mB8 could be used as security ink without needing a covering reagent in information security protection.

A water-soluble sunlight erasable ink based on [4 + 4] cycloaddition of 9-substituted anthracene

Here we report a water-soluble sunlight erasable ink based on 9-substituted anthracene for applications in data confidentiality or paper reuse.

Tuning Gel State Properties of Supramolecular Gels by Functional Group Modification

The factors affecting the self-assembly process in low molecular weight gelators (LMWGs) were investigated by tuning the gelation properties of a well-known gelator N-(4-pyridyl)isonicotinamide (4PINA). The N-H∙∙∙N interactions responsible for gel formation in 4PINA were disrupted by altering the functional groups of 4PINA, which was achieved by modifying pyridyl moieties of the gelator to pyridyl N-oxides. We synthesized two mono-N-oxides (INO and PNO) and a di-N-oxide (diNO) and the gelation studies revealed selective gelation of diNO in water, but the two mono-N-oxides formed crystals. The mechanical strength and thermal stabilities of the gelators were evaluated by rheology and transition temperature (Tgel) experiments, respectively, and the analysis of the gel strength indicated that diNO formed weak gels compared to 4PINA. The SEM image of diNO xerogels showed fibrous microcrystalline networks compared to the efficient fibrous morphology in 4PINA. Single-crystal X-ray analysis of diNO gelator revealed that a hydrogen-bonded dimer interacts with adjacent dimers via C-H∙∙∙O interactions. The non-gelator with similar dimers interacted via C-H∙∙∙N interaction, which indicates the importance of specific non-bonding interactions in the formation of the gel network. The solvated forms of mono-N-oxides support the fact that these compounds prefer crystalline state rather than gelation due to the increased hydrophilic interactions. The reduced gelation ability (minimum gel concentration (MGC)) and thermal strength of diNO may be attributed to the weak intermolecular C-H∙∙∙O interaction compared to the strong and unidirectional N-H∙∙∙N interactions in 4PINA.

Theoretical and experimental studies of an oseltamivir-triazole-based thermoresponsive organogel

Low-molecular weight organic gelators have been of significant interest in recent years because of their interesting properties and potential applications in sensing technology, biomedicine and drug delivery. Herein, the synthesis, characterization and gelation properties of new oseltamivir conjugates are reported. The oseltamivir-triazole conjugate 1 was synthesized via a click-reaction in a 75% yield. The key features of this conjugate include the presence of amide, flexible ester linkages and a triazole scaffold linking a hydrophobic alkyl chain. The conjugate 1, possessing a long alkyl chain, showed gelation properties in various apolar organic solvents. This gelation behavior was not observed in the case of the deesterified conjugate 2; this indicated the necessity of the alkyl chain for gelation. The gelator 1 showed thermoreversible gelation properties in a range of linear alkane solvents (from n-pentane to n-dodecane). A scanning electron microscopic study suggests that the gelator 1 exists as cross-linked structures, which are self-aggregated in the range of submicrometers, as supported by extensive 1H-NMR studies. The rheological parameters supported the occurrence of a soft gelation process, and the gel formed in n-decane was found to be stiffer than that formed in n-hexane. Computational studies suggested that the gelation behavior was indeed due to micelle formation and dependent on the lipophilicity of solvents.

Intelligent CO2- and photo-dual-responsive polymer vesicles with tunable wall thickness

CO₂- and photo-dual-responsive polymer vesicles with tunable wall thickness were explored and used as a potential “smart” platform for drug release.

Photochromic, organogelating and self-sorting behaviour of di-(dithienylethene) derivatives

They wouldn't mix! – Narcissistic self-sorting was found to exist in a 1 : 1 mixture of the two photoisomers of a di-(dithienylethene)-containing organgelator.

A chiral BINOL-based Gemini amphiphilic gelator and its specific discrimination of native arginine by gelation in water

A novel axially chiral cationic Gemini amphiphile gelator (S1) derived from (S)-BINOL has been synthesized and characterized by ¹H NMR, ¹³C NMR, ESI-MS and FT-IR analyses. The critical micelle concentration (CMC) of S1 was determined to be 0.21 mM in water at room temperature. A transparent hydrogel with S1 at 43 mM was obtained at room temperature and characterized using various methods including SEM, CD, fluorescence, ¹H NMR, FT-IR, and XRD. The results indicate that the hydrophobic effect of long alkyl chains, π-π stacking of naphthalene rings, and intermolecular hydrogen-bonding of the amide groups of S1 should be responsible for the hydrogel formation. Moreover, an 8.5 mM aqueous solution of S1 could gel by the addition of l-arginine, whereas it failed to gel in the presence of other 15 amino acids, respectively. It is suggested that S1 could discriminate native arginine by hydrogel formation, mainly due to the electrostatic interaction and hydrogen bonding effects between S1 and l-arginine molecules.

E–Z isomerization of the –CN– bond in anthracene-based acylhydrazone derivatives under visible light

The E–Z isomerizations of the –CN– group upon visible light irradiation induced the photoresponsive behaviour of AHP-mB8.

Photoresponsive nanostructured membranes

The perspective of adding stimuli-response to isoporous membranes stimulates the development of separation devices with pores, which would open or close under control of environment chemical composition, temperature or exposure to light.

Photoresponsive gelators

We review the different approaches that have been used to form low molecular weight gels that respond to light.

Exploiting anthracene photodimerization within peptides: light induced sequence-selective DNA binding

Here we detail the first example of anthracene photodimerisation in peptides, and use it to trigger a selective biomolecular recognition event.

Equilibrating immigration and anthracene-maleimide-based Diels-Alder-trapping of octylmaleimide in mixed photo-cross-linked polymer micelles

It is possible that the hydrophobic guest within amphiphilic polymer micelles may leak out and be captured by other species before polymer micelles adhere to the desired focus because of the complexity in an actual release procedure, rendering the reduced efficiency of the nanocarrier system. To describe such a scenario, two water-soluble fluorescent amphiphilic random copolymers of PAV and PAA with photo-cross-linkable coumarin and anthracene pendants, respectively, were chosen to investigate the equilibrating immigration and maleimide-anthracene-based Diels-Alder-trapping of hydrophobic octylmaleimide guest from one type of photo-cross-linked polymer micelles of PAV85% to another of PAA66% in aqueous solution using the emission and absorption spectra techniques.

Fluorescent hydrogels with tunable nanostructure and viscoelasticity for formaldehyde removal

Hydrogels with ultrahigh water content, ∼99 wt %, and highly excellent mechanical strength were prepared by 4'-para-phenylcarboxyl-2,2':6',2″-terpyridine (PPCT) in KOH aqueous solution. The self-assembled structure, rheological properties, and the gel-sol transformation temperature (Tgel-sol) of PPCT/KOH hydrogels that depend on PPCT and KOH concentrations were studied, indicating easily controllable conditions for producing hydrogels in PPCT and KOH mixtures. An important finding was that the hydration radius (Rh) of cations (M(+) = Li(+), Na(+), K(+), Cs(+), NH4(+), (CH3)4N(+), (CH3CH2)4N(+), (CH3CH2CH2)4N(+), (CH3CH2CH2CH2)4N(+)) plays a vital role in gelation of PPCT/MOH systems. To produce hydrogels in PPCT/MOH systems, the Rh of M(+) must be in a suitable region of 3.29 to 3.58 Å, e.g., K(+), Na(+), Cs(+), and the capability of M(+) for inducing PPCT to form hydrogels is K(+) > Na(+) > Li(+), which is followed by the Hofmeister series. The hydrogels of PPCT and KOH mixtures are responsive to external stimuli including temperature and shearing force, and present gelation-induced enhanced fluorescence emission property. The states of being sensitive to the stimuli can readily recover to the original hydrogels, which are envisaged to be an attracting candidate to produce self-healing materials. A typical function of the hydrogels of PPCT and KOH mixtures is that formaldehyde (HCHO) can speedily be adsorbed via electrostatic interaction and converted into nontoxic salts (HCOOK and CH3OK), making it a promising candidate material for HCHO removal in home furnishings to reduce indoor environmental pollutants.

A ferrocene-based multiple-stimuli responsive organometallogel

Three new ferrocene-peptide compounds were designed and prepared. We investigated their gelling abilities and found that two of them were capable of gelling various organic solvents, especially alcohols. Gels also formed in mixed alcohol-water solvents, which decreased the critical gelation concentration (CGC) of the gels. Compound 1, comprised of a dipeptide (Phe-Phe) and ferrocene, acted as a novel low-molecular-weight gelator in the formation of metallogel 1 in isopropanol-water (v/v = 1 : 1). This gelation was found to be reversible under redox stimuli; changing of the redox state of ferrocene induced a reversible gel-sol phase transition. Additionally, gel 1 responded to β-CD as a result of host-guest interactions between this compound and ferrocene. With the addition of β-CD, the gel network gradually broke down, as demonstrated by SEM.

The photodimerization characteristics of anthracene pendants within amphiphilic polymer micelles in aqueous solution

The photodimerization characteristics of anthracene pendants were comprehensively investigated by various selected narrow bands of light in the UV-vis-NIR region.

Reversible bulk-phase change of anthroyl compounds for photopatterning based on photodimerization in the molten state and thermal back reaction

As new organic materials for rewritable photopatterning, 2-anthroyl and 9-anthroyl ester compounds were synthesized. Their bulk-phase changes (we use "bulk-phase change" as complete phase change in a mass of a material neither in a surface nor in a small quantity in this study) triggered by photodimerization under melting conditions (melt-photodimerization) and subsequent thermal back reactions were investigated. All the anthroyl compounds exhibited melting points lower than ca. 160 °C, and they were nearly quantitatively converted to the corresponding photodimers by UV irradiation at temperatures of ∼5 °C higher than their respective melting points. We found that there were two kinds of bulk-phase change behaviors through the photoreaction. Two of the anthroyl compounds remained isotropic and lost fluidity during the melt-photodimerization. The obtained photodimers exhibited robust solid-state amorphous phases at room temperature. In contrast, the other three anthroyl compounds showed crystallization during the melt-photodimerization. The resulting photodimers changed from isotropic to crystalline phases, even at high temperature. Various experiments revealed that the bulk phase of the photodimers was affected not by the existence of regioisomers but by their fluidity at the photoirradiation temperature. The latter three photodimers retained enough fluidity, reflecting their high molecular mobilities at the photoirradiation temperature at which the isothermal crystallization occurred. The other two products were not able to crystallize due to low fluidity, resulting in amorphous phases. We also found that all the photodimers reverted to the corresponding monomers by thermal back reaction and recovered their initial photochemical and thermal properties. Using these reversible bulk-phase changes of the anthroyl compounds, we successfully demonstrated rewritable photopatterning in not only negative images but also positive ones, based on the optical contrast between the ordered and disordered phases.

Self-assembly of ketals of arjunolic acid into vesicles and fibers yielding gel-like dispersions

Ten aliphatic and aromatic ketals of arjunolic acid, a renewable, nanosized triterpenic acid which is obtainable from Terminalia arjuna, have been synthesized upon condensation with aldehydes. Self-assembly properties of the ketals have been studied in a wide range of organic liquids. With the exception of the p-nitrobenzylidene derivative, low concentrations of the ketals self-assemble and form gel-like dispersions in many of the organic liquids examined. The morphologies of the assemblies, studied at different distance scales by optical, electron, and atomic-force microscopies, consisted of fibrillar networks and vesicles which were able to entrap 5(6)-carboxyfluorescein as a guest molecule. X-ray diffractograms indicate that the fibrillar objects are crystalline. A charge-transfer complex was formed from a 1:1 mixture of ketal derivatives with electron-donating and electron-accepting groups, and the 9-anthrylidene derivative in its fibrillar network dimerized upon irradiation. Results demonstrate that subtle changes in the ketal structures can lead to very different aggregation pathways.