Osmosis based method drives the self-assembly of polymeric chains into micro- and nanostructures

Teratogenic effects of environmental concentration of plastic particles on freshwater organisms

Given the widespread presence of plastics, especially in micro- and nanoscale sizes, in freshwater systems, it is crucial to identify a suitable model organism for assessing the potential toxic and teratogenic effects of exposure to plastic particles. Until now, the early life stage of freshwater organisms and the regeneration capacity in relation to plastic particles exposure is a still poorly investigated topic. In this study, we examine the teratogenic effect on diatom Cocconeis placentula and cnidarian Hydra vulgaris under controlled exposure conditions of poly(styrene-co-methyl methacrylate) (P(S-co-MMA)) particles. Significant effects were observed at the lowest concentrations (0.1 μg/L). A significant increase in the teratological frequency in C. placentula and a significant decrease in the regeneration rate in H. vulgaris were found at the lowest concentration. The delay in hydra regeneration impaired the feeding capacity and tentacles reactivity at 96 h of exposure. No effects on diatom growth were observed upon exposure to P(S-co-MMA) particles (0.1, 1, 100, 10,000 μg/L) for 28 days and these findings agree with other studies investigating algal growth. The application of the Teratogenic Risk Index, modified for diatoms, highlighted a moderate risk for the lowest concentration evaluating C. placentula and low risk at the lowest and the highest concentrations considering H. vulgaris. This study suggests the importance of testing organisms belonging to different trophic levels as diverse teratogenic effects can be found and the need to evaluate environmentally relevant concentrations of plastic particles.

Dye-Doped Polymeric Microplastics: Light Tools for Bioimaging in Test Organisms

Ecosystems around the world are experiencing a major environmental impact from microplastic particles (MPs 0.1 µm-1 mm). Water, sediments, and aquatic biota show the widespread presence of this pollutant. However, MPs are rarely used in laboratory studies as they are scarcely available for purchase or expensive, especially if one wishes to trace the particle with a dye or fluorescent. Furthermore, existing preparation techniques have limited application in biological studies. In this work, we propose a new, easy, and cheap way to prepare fluorescent MPs. The protocol is based on the osmosis method in order to obtain spherical polymeric particles of P(S-co-MMA), with 0.7-9 micron diameter, made fluorescent because dye-doped with rhodamine B isothiocyanate (RITC) or fluorescein isothiocyanate (FITC). The dye loading was studied and optimized, and the MPs-dye conjugates were characterized by UV-vis FTIR and XPS spectrometry and scanning electron microscopy (SEM). Furthermore, preliminary tests on aquatic organisms demonstrated the possible use of these fluorescent MPs in bioimaging studies, showing their absorption/adsorption by duckweeds (Lemna minuta) and insect larvae (Cataclysta lemnata).

Nanoplastic exposure inhibits feeding and delays regeneration in a freshwater planarian

The concentration of nanoplastics (NPs) is expected to increase in aquatic environments thus potentially threatening freshwater organisms through interactions with plastic particles that variously float, circulate in the water column or sink into the benthos. Studies into the mechanisms of any NP effects are still scarce, particularly with respect to the regenerative ability of biota for which there is no recognised model organism. The present study therefore aimed to investigate behavioural and regeneration responses of the freshwater planarian Girardia tigrina after 10 days exposed to along a gradient 0.01-10 mg/L of poly (styrene-co-methyl methacrylate) NPs (∼426 ± 175 nm). Exposure to NPs induced a significant reduction in planarian feeding rate even at low concentrations (LOEC of 0.01 mg/L), while head regeneration was delayed in a clear dose response way (LOEC of 0.1 mg/L for blastema length). Planaria locomotion assessed was not affected. Our results highlight the potential adverse effects of exposure to poly (styrene-co-methyl methacrylate) NPs and show that feeding behaviour and regeneration of a freshwater benthic organism can be indicators of the resulting toxicity. Planarians are becoming widely used model organisms in ecotoxicology and can help to address potential effects of plastic polymers on regeneration.

Polymeric nanoparticles for enhanced delivery and improved bioactivity of essential oils

Essential oils are volatile constituents that give aromatic plants their characteristic odour. The application of these plant actives in food, agriculture, pharmaceutics, and cosmetics has been widely studied. Aromatherapy, a complementary therapy involving the use of essential oils to treat several diseases ranging from microbial infections to metabolic dysfunctions, has been utilised for centuries. Anticancer, antimicrobial, and anti-inflammatory activities are well-established among other pharmacological properties of these aromatic oils. The oils, which are composed mainly of terpene-based compounds, have also been explored as nutraceuticals, alternative green preservatives, and functional additives in foods. However, due to their physicochemical properties, viz high volatility and low aqueous solubility, essential oil delivery to target receptors were challenging when administered as chemotherapeutics. Hence, formulating essential oils with suitable excipients to enhance their delivery and bioavailability, invariably improving their bioactivity and therapeutic efficacy becomes expedient. Nanotechnology presents a unique strategy to develop a particulate delivery system for the controlled, sustained, and extended release of essential oils. In this review, we examine and summarize the trends and developments in the formulation of essential oils using polymeric nanoparticles.

Effects of Microplastic Contamination on the Aquatic Plant Lemna minuta (Least Duckweed)

Microplastics are widely spread in aquatic environments. Although they are considered among the most alarming contaminants, toxic effects on organisms are unclear, particularly on freshwater plants. In this study, the duckweed Lemna minuta was grown on different concentrations (50, 100 mg/L) of poly(styrene-co-methyl methacrylate) microplastics (MP) and exposure times (T0, T7, T14, T28 days). The phytotoxic effects of MP were investigated by analyzing several plant morphological and biochemical parameters (frond and root size, plant growth, chlorophyll, and malondialdehyde content). Observations by scanning electron microscope revealed MP adsorption on plant surfaces. Exposition to MP adversely affected plant growth and chlorophyll content with respect to both MP concentrations and exposure times. Conversely, malondialdehyde measurements did not indicate an alteration of oxidative lipid damage in plant tissue. The presence of MP induced root elongation when compared to the control plants. The effects of MP on L. minuta plants were more evident at T28. These results contribute to a better understanding of MP's impact on aquatic plants and highlight that MP contamination manifests with chronic-type effects, which are thus detectable at longer exposure times of 7 days than those traditionally used in phytotoxicology tests on duckweeds.

Microfluidics Technology for the Design and Formulation of Nanomedicines

In conventional drug administration, drug molecules cross multiple biological barriers, distribute randomly in the tissues, and can release insufficient concentrations at the desired pathological site. Controlling the delivery of the molecules can increase the concentration of the drug in the desired location, leading to improved efficacy, and reducing the unwanted effects of the molecules under investigation. Nanoparticles (NPs), have shown a distinctive potential in targeting drugs due to their unique properties, such as large surface area and quantum properties. A variety of NPs have been used over the years for the encapsulation of different drugs and biologics, acting as drug carriers, including lipid-based and polymeric NPs. Applying NP platforms in medicines significantly improves the disease diagnosis and therapy. Several conventional methods have been used for the manufacturing of drug loaded NPs, with conventional manufacturing methods having several limitations, leading to multiple drawbacks, including NPs with large particle size and broad size distribution (high polydispersity index), besides the unreproducible formulation and high batch-to-batch variability. Therefore, new methods such as microfluidics (MFs) need to be investigated more thoroughly. MFs, is a novel manufacturing method that uses microchannels to produce a size-controlled and monodispersed NP formulation. In this review, different formulation methods of polymeric and lipid-based NPs will be discussed, emphasizing the different manufacturing methods and their advantages and limitations and how microfluidics has the capacity to overcome these limitations and improve the role of NPs as an effective drug delivery system.

The Synthesis, Characterization and Applications of Polyhydroxyalkanoates (PHAs) and PHA-Based Nanoparticles

Polyhydroxyalkanoates (PHAs) are storage granules found in bacteria that are essentially hydroxy fatty acid polyesters. PHA molecules appear in variety of structures, and amongst all types of PHAs, polyhydroxybutyrate (PHB) is used in versatile fields as it is a biodegradable, biocompatible, and ecologically safe thermoplastic. The unique physicochemical characteristics of these PHAs have made them applicable in nanotechnology, tissue engineering, and other biomedical applications. In this review, the optimization, extraction, and characterization of PHAs are described. Their production and application in nanotechnology are also portrayed in this review, and the precise and various production methods of PHA-based nanoparticles, such as emulsion solvent diffusion, nanoprecipitation, and dialysis are discussed. The characterization techniques such as UV-Vis, FTIR, SEM, Zeta Potential, and XRD are also elaborated.

Controlled Release of 18-β-Glycyrrhetinic Acid from Core-Shell Nanoparticles: Effects on Cytotoxicity and Intracellular Concentration in HepG2 Cell Line

18β-glycyrrhetinic acid (GA) is a pentacyclic triterpene with promising hepatoprotective and anti-Hepatocellular carcinoma effects. GA low water solubility however reduces its biodistribution and bioavailability, limiting its applications in biomedicine. In this work we used core-shell NPs made of PolyD-L-lactide-co-glycolide (PLGA) coated with chitosan (CS), prepared through an osmosis-based methodology, to efficiently entrap GA. NPs morphology was investigated with SEM and TEM and their GA payload was evaluated with a spectrophotometric method. GA-loaded NPs were administered to HepG2 cells and their efficiency in reducing cell viability was compared with that induced by the free drug in in vitro tests. Cell viability was evaluated by the MTT assay, as well as with Electric Cells-Substrate Impedance Sensing (ECIS), that provided a real-time continuous monitoring. It was possible to correlate the toxic effect of the different forms of GA with the bioavailability of the drug, evidencing the importance of real-time tests for studying the effects of bioactive substances on cell cultures.

Polymeric Nanoparticles Decorated with Monoclonal Antibodies: A New Immobilization Strategy for Increasing Lipase Activity

Recent advances in nanotechnology techniques enable the production of polymeric nanoparticles with specific morphologies and dimensions and, by tailoring their surfaces, one can manipulate their characteristics to suit specific applications. In this work we report an innovative approach for the immobilization of a commercial lipase from Candida rugosa (CRL) which employs nanostructured polymeric carriers conjugated with anti-lipase monoclonal antibodies (MoAbs). MoAbs were chemically conjugated on the surface of polymeric nanoparticles and used to selectively adsorb CRL molecules. Hydrolytic enzymatic assays evidenced that such immobilization technique afforded a significant enhancement of enzymatic activity in comparison to the free enzyme.

Synthesis of Starch Nanoparticles and Their Applications for Bioactive Compound Encapsulation

In recent years, starch nanoparticles (SNPs) have attracted growing attention due to their unique properties as a sustainable alternative to common nanomaterials since they are natural, renewable and biodegradable. SNPs can be obtained by the breakdown of starch granules through different techniques which include both physical and chemical methods. The final properties of the SNPs are strongly influenced by the synthesis method used as well as the operational conditions, where a controlled and monodispersed size is crucial for certain bioapplications. SNPs are considered to be a good vehicle to improve the controlled release of many bioactive compounds in different research fields due to their high biocompatibility, potential functionalization, and high surface/volume ratio. Their applications are frequently found in medicine, cosmetics, biotechnology, or the food industry, among others. Both the encapsulation properties as well as the releasing processes of the bioactive compounds are highly influenced by the size of the SNPs. In this review, a general description of the different types of SNPs (whole and hollow) synthesis methods is provided as well as on different techniques for encapsulating bioactive compounds, including direct and indirect methods, with application in several fields. Starches from different botanical sources and different bioactive compounds are compared with respect to the efficacy in vitro and in vivo. Applications and future research trends on SNPs synthesis have been included and discussed.

Nanoparticles Based on Hydrophobic Polysaccharide Derivatives-Formation Principles, Characterization Techniques, and Biomedical Applications

Polysaccharide (PS) nanoparticles (NP) are fascinating materials that combine huge application potential with the unique beneficial features of natural biopolymers. Different types of PS-NP can be distinguished depending on the basic preparation principles (top-down vs bottom-up vs coating of nanomaterials) and the material from which they are obtained (native PS vs chemically modified PS derivatives vs nanocomposites). This review provides a comprehensive overview of an approach towards PS-NP that has gained rapidly increasing interest within the last decade; the nanoself-assembling of hydrophobic PS derivatives. This facile process is easy to perform and offers a broad structural diversity in terms of the PS backbone and the additional functionalities that can be introduced. Fundamental principles of different NP preparation techniques along with useful characterization methods are presented in this work. A comprehensive summary of PS-NP prepared by different techniques and with various PS backbones and types/amounts of hydrophobic substituents is given. The intention is to demonstrate how different parameters determine the size, size distribution, and zeta-potential of the particles. Moreover, application trends in biomedical areas are highlighted in which tailored functional PS-NP are evaluated and constantly developed further.

PLGA based particles as "drug reservoir" for antitumor drug delivery: characterization and cytotoxicity studies

Doxorubicin (DOX) is commonly used to treat several tumor types, but its severe side effects, primarily cardiotoxicity, represent a major limitation for its use in clinical settings. In this study we developed and characterized biodegradable and stable poly(D,L-lactic-co-glycolic) acid (PLGA) submicrocarriers employing an osmosis-based patented methodology, which allowed to optimize the drug loading efficiency up to 99%. Proceeding from this, we evaluated on MCF-7, a human breast cancer cell line, the ability of PLGA to promote the internalization of DOX and to improve its cytotoxicity in vitro. We found that the in vitro uptake efficiency is dramatically increased when DOX is loaded within PLGA colloidal carriers, which adhere to the cell membrane behaving as an efficient drug reservoir. In fact, the particles provide a diffusion-driven, sustained release of DOX across the cell membrane, resulting in high drug concentration. Accordingly, the cytotoxic analysis clearly showed that DOX-loaded PLGA exhibit a lower 50% inhibitory concentration than free DOX. The decay time of cell viability was successfully compared with DOX diffusion time constant from PLGA. The overall in vitro results highlight the potential of DOX-loaded PLGA particles to be employed as vectors with improved antitumor efficacy.

pH Variation as a Simple and Selective Pathway for Obtaining Nanoparticle or Nanocapsule Polysaccharides

The fabrication of polysaccharides to be nanoparticles or nanocapsules is quite specific due to various parameters and factors. The present work demonstrates a simple pathway to selectively prepare the ionic polysaccharide flakes to be nanoparticles or nanocapsules. The systematic studies on the model cases of cationic polysaccharide (i.e., chitosan) and anionic polysaccharide (i.e., alginate) confirm that p K_a is the key point to tune the polysaccharides to be nanoparticles or nanocapsules. When the ionic polysaccharides were in an oil/water emulsion system, the pH close to p K_a leads to the densely packed polysaccharide chains under the hydrogen bond networks, and as a result the cross-link occurs all through the chains to be nanoparticles. On the other hand, when pH was adjusted to the lower or higher than p K_a depending on the types of ionic polysaccharide, the polysaccharide chains are under charge-charge repulsive force, resulting in the alignment of polysaccharide chains to be hollow nanospheres, and at that time the cross-link initiates the formation of nanocapsules. The present work, for the first time, clarifies that pH variation is the key to selectively prepare nanoparticles or nanocapsules, and this is important for delivery systems, coatings, sensors, and so forth.

Controlled release of 18-β-glycyrrhetic acid by nanodelivery systems increases cytotoxicity on oral carcinoma cell line

The topical treatment for oral mucosal diseases is often based on products optimized for dermatologic applications; consequently, a lower therapeutic effect may be present. 18-β-glycyrrhetic acid (GA) is extracted from Glycirrhiza glabra. The first aim of this study was to test the cytotoxicity of GA on PE/CA-PJ15 cells. The second aim was to propose and test two different delivery systems, i.e. nanoparticles and fibers, to guarantee a controlled release of GA in vitro. We used chitosan and poly(lactic-co-glycolic) acid based nanoparticles and polylactic acid fibers. We tested both delivery systems in vitro on PE/CA-PJ15 cells and on normal human gingival fibroblasts (HGFs). The morphology of GA-loaded nanoparticles (GA-NPs) and fibers (GA-FBs) was investigated by electron microscopy and dynamic light scattering; GA release kinetics was studied spectrophotometrically. MTT test was used to assess GA cytotoxicity on both cancer and normal cells. Cells were exposed to different concentrations of GA (20-500 μmol l^-1) administered as free GA (GA-f), and to GA-NPs or GA-FBs. ROS production was evaluated using dichlorodihydrofluorescein as a fluorescent probe. Regarding the cytotoxic effect of GA on PE/CA-PJ15 cells, the lowest TC₅₀ value was 200 μmol l^-1 when GA was added as GA-NPs. No cytotoxic effects were observed when GA was administered to HGFs. N-acetyl Cysteine reduced mortality induced by GA-f in PE/CA-PJ15 cells. The specific effect of GA on PE/CA-PJ15 cells is mainly due to the different sensitivity of cancer cells to ROS over-production; GA-NPs and GA-FBs formulations increase, in vitro, this toxic effect on oral cancer cells.

Endocytic pathways involved in PLGA nanoparticle uptake by grapevine cells and role of cell wall and membrane in size selection

PLGA NPs' cell uptake involves different endocytic pathways. Clathrin-independent endocytosis is the main internalization route. The cell wall plays a more prominent role than the plasma membrane in NPs' size selection. In the last years, many studies on absorption and cell uptake of nanoparticles by plants have been conducted, but the understanding of the internalization mechanisms is still largely unknown. In this study, polydispersed and monodispersed poly(lactic-co-glycolic) acid nanoparticles (PLGA NPs) were synthesized, and a strategy combining the use of transmission electron microscopy (TEM), confocal analysis, fluorescently labeled PLGA NPs, a probe for endocytic vesicles (FM4-64), and endocytosis inhibitors (i.e., wortmannin, ikarugamycin, and salicylic acid) was employed to shed light on PLGA NP cell uptake in grapevine cultured cells and to assess the role of the cell wall and plasma membrane in size selection of PLGA NPs. The ability of PLGA NPs to cross the cell wall and membrane was confirmed by TEM and fluorescence microscopy. A strong adhesion of PLGA NPs to the outer side of the cell wall was observed, presumably due to electrostatic interactions. Confocal microscopy and treatment with endocytosis inhibitors suggested the involvement of both clathrin-dependent and clathrin-independent endocytosis in cell uptake of PLGA NPs and the latter appeared to be the main internalization pathway. Experiments on grapevine protoplasts revealed that the cell wall plays a more prominent role than the plasma membrane in size selection of PLGA NPs. While the cell wall prevents the uptake of PLGA NPs with diameters over 50 nm, the plasma membrane can be crossed by PLGA NPs with a diameter of 500-600 nm.

Polymeric nanoparticles: A study on the preparation variables and characterization methods

Since the emergence of Nanotechnology in the past decades, the development and design of nanomaterials has become an important field of research. An emerging component in this field is nanomedicine, wherein nanoscale materials are being developed for use as imaging agents or for drug delivery applications. Much work is currently focused in the preparation of well-defined nanomaterials in terms of size and shape. These factors play a significantly role in the nanomaterial behavior in vivo. In this context, this review focuses on the toolbox of available methods for the preparation of polymeric nanoparticles. We highlight some recent examples from the literature that demonstrate the influence of the preparation method on the physicochemical characteristics of the nanoparticles. Additionally, in the second part, the characterization methods for this type of nanoparticles are discussed.

PLA micro- and nano-particles

Poly(d,l-lactic acid) (PLA) has been widely used for various biomedical applications for its biodegradable, biocompatible, and nontoxic properties. Various methods, such as emulsion, salting out, and precipitation, have been used to make better PLA micro- and nano-particle formulations. They are widely used as controlled drug delivery systems of therapeutic molecules, including proteins, genes, vaccines, and anticancer drugs. Even though PLA-based particles have challenges to overcome, such as low drug loading capacity, low encapsulation efficiency, and terminal sterilization, continuous innovations in particulate formulations will lead to development of clinically useful formulations.

Two-Stage Growth of Polymer Nanoparticles at the Liquid-Vapor Interface by Vapor-Phase Polymerization

In this article, we study the growth of polymer nanoparticles that are formed on the surface of silicone oils via initiated chemical vapor deposition. The average radius of the particles can be increased by decreasing the silicone oil viscosity, increasing the deposition time, or increasing the deposition rate. The time series data indicates that there are two stages for particle growth. Particle nucleation occurs in the first stage and the particle size is dependent on the liquid viscosity and deposition rate. Particle growth occurs in the second stage, during which the particle size is dependent only on the amount of deposited polymer. This two-step process allows us to make core-shell particles by sequentially depositing different polymers. The benefits of our nanoparticle synthesis process are that solvents and surfactants are not required and the size of the nanoparticles can be controlled over a wide range of radii with a relatively narrow distribution.

Hollow-layered nanoparticles for therapeutic delivery of peptide prepared using electrospraying

The viability of single and coaxial electrospray techniques to encapsulate model peptide-angiotensin II into near mono-dispersed spherical, nanocarriers comprising N-octyl-O-sulphate chitosan and tristearin, respectively, was explored. The stability of peptide under controlled electric fields (during particle generation) was evaluated. Resulting nanocarriers were analysed using dynamic light scattering and electron microscopy. Cell toxicity assays were used to determine optimal peptide loading concentration (~1 mg/ml). A trout model was used to assess particle behaviour in vivo. A processing limit of 20 kV was determined. A range of electrosprayed nanoparticles were formed (between 100 and 300 nm) and these demonstrated encapsulation efficiencies of ~92 ± 1.8%. For the single needle process, particles were in matrix form and for the coaxial format particles demonstrated a clear core-shell encapsulation of peptide. The outcomes of in vitro experiments demonstrated triphasic activity. This included an initial slow activity period, followed by a rapid and finally a conventional diffusive phase. This was in contrast to results from in vivo cardiovascular activity in the trout model. The results are indicative of the substantial potential for single/coaxial electrospray techniques. The results also clearly indicate the need to investigate both in vitro and in vivo models for emerging drug delivery systems.

Biosynthesis and Characterization of Cross-Linked Fmoc Peptide-Based Hydrogels for Drug Delivery Applications

Recently, scientific and technological interest in the synthesis of novel peptide-based hydrogel materials have grown dramatically. Applications of such materials mostly concern the biomedical field with examples covering sectors such as drug delivery, tissue engineering, and production of scaffolds for cell growth, thanks to their biocompatibility and biodegradability. In this work we synthesized Fmoc-Phe₃ based hydrogels of different chirality by using a biocatalytic approach. Moreover, we investigated the possibility of employing a crosslinker during the biosynthetic process and we studied and compared some chemico-physical features of both crosslinked and non-crosslinked hydrogels. In particular, we investigated the rheological properties of such materials, as well as their swelling ability, stability in aqueous medium, and their structure by SEM and AFM analysis. Crosslinked and non-crosslinked hydrogels could be formed by this procedure with comparable yields but distinct chemico-physical features. We entrapped dexamethasone within nanopolymeric particles based on PLGA coated or not with chitosan and we embedded these nanoparticles into the hydrogels. Dexamethasone release from such a nanopolymer/hydrogel system was controlled and sustained and dependent on genipin crosslinking degree. The possibility of efficiently coupling a drug delivery system to hydrogel materials seem particularly promising for tissue engineering applications, where the hydrogel could provide cells the necessary support for their growth, while nanoparticles could favor cell growth or differentiation by providing them the necessary bioactive molecules.

A nanostructured composite based on polyaniline and gold nanoparticles: synthesis and gas sensing properties

Nanostructured composite materials based on polyaniline (PANI) and gold nanoparticles have been prepared by means of an osmosis based method. Several morphologies have been obtained for the pristine nanoPANI and for nanoPANI-Au composite, ranging from amorphous to sponge-like and spherical shapes. On the basis of this morphological investigation, different materials with high surface area have been selected and tested as chemical interactive materials for room temperature gas and vapor sensing. The resistive sensor devices have been exposed to different vapor organic compounds (VOCs) of interest in the fields of environmental monitoring and biomedical applications, such as toluene, acetic acid, ethanol, methanol, acetonitrile, water, ammonia and nitrogen dioxide. The effect of doping with H2SO4 has been studied for both nanoPANI and nanoPANI-Au samples. In particular, nanoPANI-Au showed sensitivity to ammonia (up to 10 ppm) higher than that to other VOCs or interfering analytes. The facile preparation method and the improved properties achieved for the polyaniline-gold composite materials are significant in the nanomaterials field and have promise for applications in ammonia vapor monitoring.

Preparation of biocompatible chitosan grafted poly(lactic acid) nanoparticles

Chitosan grafted poly(lactic acid) (CS-g-PLA) copolymer was synthesized and characterized by FT-IR and elemental analysis. The degree of poly(lactic acid) substitution on chitosan was 1.90 ± 0.04%. The critical aggregation concentration of CS-g-PLA in distilled water was 0.17 mg/ml. Three methods of preparing CS-g-PLA nanoparticles (diafiltration method, ultrasonication method and diafiltration combined with ultrasonication method) were investigated and their effect was compared. Of the three methods, diafiltration combined with ultrasonication method produced nanoparticles with optimal property in terms of size and morphology, with size ranging from 133 to 352 nm and zeta potential from 36 to 43 mV. Also, the hemolytic activity and cytotoxicity of the CS-g-PLA based nanoparticles was tested, and results showed low hemolysis rate (<5%) and no significant cytotoxicity effect of these nanoparticles.

PLGA-based nanoparticles: effect of chitosan in the aggregate stabilization. A dielectric relaxation spectroscopy study

Chitosan-modified polylactic-co-glycolic acid (PLGA) nanoparticles with average diameter of 200 nm in PBS buffer solution have been investigated by means of dielectric relaxation spectroscopy measurements in the frequency range (1 MHz-2 GHz) where interfacial polarizations occur. PLGA-based nanoparticles offer remarkable advantages in different biotechnological fields, such as their biocompatibility, easiness of administration and rather complete biodegradation. However, despite the use of these drug delivery systems is increasing, little is known about the basic process involved in the formation of complexes and in the subsequent release kinetics. In the present work, we have characterized the colloidal behavior of PLGA-based nanoparticles in the presence of oppositely charged chitosan polyelectrolyte by means of dynamic light scattering, electrophoretic mobility and radiowave dielectric relaxation measurements. In particular, we have emphasized how the presence of a coating layer at the nanoparticle surface could exert a marked slowing-down in the drug release. The consequence of this finding is briefly discussed at the light of some biological implications.