One-Step Route to α-Hydroxyl-ω-(carboxylic acid) Polylactones Using Catalysis by Decamolybdate Anion

Synthesis of immunomodulatory biomimetic lipid polymer hybrid nanoparticles and application of zebrafish larvae in immunomodulation screening

Since the antibiotic golden era of the mid-20th century, there have been limited antibiotics approved, while antibiotic resistance continues to escalate disproportionately, outpacing the rate of novel antibiotic discovery. This imbalance poses a serious global health concern, with an estimated annual death toll of 10 million due to antibiotic resistance by 2050. There is a growing interest in immunotherapy as an alternative approach to conventional antibiotics due to its ability to target and stimulate immune system, leveraging its innate ability to self-eradicate pathogens. This study synthesized lipid polymer hybrid nanoparticles (LPHNPs) conjugated with two immunomodulatory agents, namely, curdlan and mycolic acid (MA), as a potential immunotherapy for bacterial infections. LPHNPs were synthesized using lecithin and polycaprolactone (PCL) at a 15 % lipid-to-polymer (w/w) ratio. Additionally, PCL-curdlan copolymer, comprising 15 % w/w curdlan, was successfully synthesized and used to conjugate the LPHNPs with various curdlan concentrations. Furthermore, The LPHNPs were conjugated with varying MA concentrations, with or without curdlan. In-vivo assessment of the immunomodulatory effect of the LPHNPs was conducted using a larval zebrafish model assessing behaviour and immunofluorescence, as indicators of immune stimulation. The data suggests that curdlan exhibits a more complex immunoregulatory role as demonstrated by the countered stimulated behavioural effect while inflammation remained heightened. This work also provides new insights that zebrafish larvae are a valuable screening tool in the development of nanoparticle immunotherapies.

Monodisperse oligo(ε-caprolactones) with terpenes and alkyl end-groups: synthesis, isolation, characterization, and antibacterial activity

Linear aliphatic oligoesters derived from ε-caprolactone (CL) were synthesized by ring-opening polymerization (ROP) using terpene alcohols that have antibacterial activity as initiators (nerol, geraniol, β-citronellol and farnesol). Ammonium decamolybdate (NH4)8[Mo10O34] was used as a catalyst. From previous oligoesters, monodisperse species of monomers, dimers, and trimers were isolated by flash column chromatography (FCC). Poly(ε-caprolactone) (PCL) oligoesters [oligo(CLs)] and monodisperse oligomeric species were characterized by different analytical techniques, such as nuclear magnetic resonance (NMR) spectroscopy, electrospray ionization quadrupole time-of-flight mass spectrometry (ESI/MS-QTOF), and Fourier-transform infrared (FTIR) spectroscopy to determine the chemical nature of the samples. The thermal properties were analyzed by differential scanning calorimetry (DSC), which showed significant differences between the olefin and alkyl terminal groups. The end-groups affected crystalline domains according to the crystallization temperatures (T c), melting temperatures (T m), and glass transition temperature (T g) of the oligo(CLs) and monodisperse oligomeric species. In addition, the results of thermogravimetric analysis (TGA) suggest that the thermal degradation in the case of the monomer and dimer species with olefin terminal groups is similar compared to that with the alkyl terminal group. Due to the antimicrobial properties of olefinic initiators, microbiological tests were carried out on the monodisperse oligomeric species through studies of the minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and antibiograms. This is the first time in the literature that monodisperse oligomers derived from PCL functionalized with terpenes and alkyl end-groups were tested in terms of their antibacterial properties. The results indicated that these monodisperse species could lead to new antibiotic compounds with potential applications.

Comparison of three elements (In, Sn, and Sb) in the same period as catalysts in the ring-opening polymerization of l-lactide: from amorphous to semicrystalline polyesters

The ring-opening polymerization (ROP) of l-lactide (l-LA) is the main method for synthesizing poly(l-lactide) (PLLA), in which choosing the catalyst is one of the most important parameters. In this work, we focused on the systematic study of catalysts based on p-block elements from period 5, such as indium(iii), tin(ii), tin(iv) and antimony(iii) acetates, which displayed contrasting performances influenced by the oxidation state of the metal center. Analysis of the obtained oligomers by different techniques, including nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), polarized optical microscopy (POM) and matrix-assisted laser desorption ionization-time-of-flight (MALDI-TOF), revealed the selectivity of each catalyst toward the ROP of l-LA. Tin(ii) acetate showed the best performance, making it the best catalyst of this series for synthesizing PLLA. Indium(iii) and tin(ii) acetates induced an amorphous and semicrystalline polyester, respectively. The kinetic study evidenced the excellent performance of tin(ii) acetate in the ROP of l-LA. This catalyst reached high conversions in a quarter of the total reaction time, positioning it as the most catalytically active of the selected p-block acetate catalysts. Finally, the coordination-insertion mechanism by the catalyst in the initiation step was corroborated through the development of a mechanistic study applying the density functional theory (DFT).

Synthesis and characterization of macrodiols and non-segmented poly(ester-urethanes) (PEUs) derived from α,ω-hydroxy telechelic poly(ε-caprolactone) (HOPCLOH): effect of initiator, degree of polymerization, and diisocyanate

Nine different macrodiols derived from α,ω-hydroxy telechelic poly(ε-caprolactone) (HOPCLOH) were prepared by ring-opening polymerization of ε-caprolactone (CL) using three linear aliphatic diols (HO-(CH2) n -OH, where n = 4, 8, and 12) as initiators and catalyzed by ammonium decamolybdate (NH4)8[Mo10O34]. The crystallization temperature (T c) and crystallinity (x i) were relatively high for HOPCLOH species with a long aliphatic chain [-(CH2)12-] in the oligoester. Also, HOPCLOH was the precursor of twenty-seven different poly(ester-urethanes) (PEUs) with various degrees of polymerization (DP) of HOPCLOH and three types of diisocyanates such as 1,6-hexamethylene diisocyanate (HDI), methylene diphenyl diisocyanate (MDI), and 4,4'-methylenebis (cyclohexyl isocyanate) (HMDI). HOPCLOH exhibited the melting temperature (T m) and crystallinity (x i) with a proportional dependency to the degree of polymerization (DP). PEUs showed significant thermal and mechanical properties, which had a direct correlation in terms of the type of DP and diisocyanate. PEUs derived from HDI versus MDI or HMDI exhibited an apparent effect where aliphatic diisocyanate (HDI) induced a significant x i with respect to aromatic and cyclic diisocyanate (MDI or HMDI). The profile of PEUs films according to mechanical properties is mainly a plastic behavior. The chemical nature and properties of HOPCLOH and PEUs were characterized by NMR, FT-IR, GPC, MALDI-TOF, DSC, and mechanical properties.

Synthesis and Characterization of ABA-Type Triblock Copolymers Using Novel Bifunctional PS, PMMA, and PCL Macroinitiators Bearing p-xylene-bis(2-mercaptoethyloxy) Core

Syntheses of novel bifunctional poly(methyl methacrylate) (PMMA)-, poly(styrene) (PS)-, and (poly ε-caprolactone) (PCL)-based atom transfer radical polymerization (ATRP) macroinitiators derived from p-xylene-bis(1-hydroxy-3-thia-propanoloxy) core were carried out to obtain ABA-type block copolymers. Firstly, a novel bifunctional ATRP initiator, 1,4-phenylenebis(methylene-thioethane-2,1-diyl)bis(2-bromo-2-methylpropanoat) (PXTBR), synthesized the reaction of p-xylene-bis(1-hydroxy-3-thia-propane) (PXTOH) with α-bromoisobutryl bromide. The PMMA and PS macroinitiators were prepared by ATRP of methyl methacrylate (MMA) and styrene (S) as monomers using (PXTBR) as the initiator and copper(I) bromide/N,N,N',N″,N″-pentamethyldiethylenetriamine (CuBr/PMDETA) as a catalyst system. Secondly, di(α-bromoester) end-functionalized PCL-based ATRP macronitiator (PXTPCLBr) was prepared by esterification of hydroxyl end groups of PCL-diol (PXTPCLOH) synthesized by Sn(Oct)2-catalyzed ring opening polymerization (ROP) of ε-CL in bulk using (PXTOH) as initiator. Finally, ABA-type block copolymers, PXT(PS-b-PMMA-b-PS), PXT(PMMA-b-PS-b-PMMA), PXT(PS-b-PCL-b-PS), and PXT(PMMA-b-PCL-b-PMMA), were synthesized by ATRP of MMA and S as monomers using PMMA-, PS-, and PCL-based macroinitiators in the presence of CuBr/PMDETA as the catalyst system in toluene or N,N-dimethylformamide (DMF) at different temperatures. In addition, the extraction abilities of PCL and PS were investigated under liquid-liquid phase conditions using heavy metal picrates (Ag+, Cd2+, Cu2+, Hg2+, Pb2+, and Zn2+) as substrates and measuring with UV-Vis the amounts of picrate in the 1,2-dichloroethane phase before and after treatment with the polymers. The extraction affinity of PXTPCL and PXTPS for Hg2+ was found to be highest in the liquid-liquid phase extraction experiments. Characterizations of the molecular structures for synthesized novel initiators, macroinitiators, and the block copolymers were made by spectroscopic (FT-IR, ESI-MS, 1H NMR, 13C NMR), DSC, TGA, chromatographic (GPC), and morphologic SEM.

Sustainable xanthophylls-containing poly(ε-caprolactone)s: synthesis, characterization, and use in green lubricants

Three xanthophylls [(3R,3'R,6'R)-lutein (1), (3R,3'S)-zeaxanthin (2), and (3R,3'S)-astaxanthin (3)] were used for the first time as initiators in the ring-opening polymerization (ROP) of ε-caprolactone (CL) catalyzed by tin(ii) 2-ethylhexanoate [Sn(Oct)2] for the synthesis of novel sustainable xanthophyll-containing poly(ε-caprolactone)s (xanthophylls-PCL). The obtained polyesters were characterized by 1H and 13C NMR, FT-IR, DSC, SEC, and MALDI-TOF MS, and their use as additives in green lubricants was evaluated using a sliding friction test under boundary conditions. Xanthophylls-PCL were obtained with good conversions and with molecular weights determined by SEC to be between 2500 and 10 500 Da. The thermal properties of xanthophyll-polyesters showed a crystalline domain, detected by DSC. Lastly, the green lubricant activity of these polymers was evaluated and the results showed that xanthophylls-PCL could be employed as additives for biodegradable lubricant applications since they have better tribological behavior than current additives, which demonstrates their potential as future commercial materials with interesting eco-friendly properties for diverse applications.

Biocompatible mucoadhesive nanoparticles for brain targeting of ropinirole hydrochloride: Formulations, radiolabeling and biodistribution

Two nanoformulations with mucoadhesive properties and brain-targeting mechanisms were designed to deliver the anti-Parkinson's drug, ropinirole hydrochloride (RH). In the first formulation, RH and the amphiphilic block copolymer methoxy poly(ethylene glycol)-b-poly(caprolactone) were assembled in a core-shell morphology followed by coating with a mucoadhesive chitosan outer layer producing a multilayer vehicle (MLV). In the second formulation, RH was encapsulated during the polyelectrolyte complexation of two natural polymers, chitosan and alginate producing RH-loaded chitosan-alginate polyelectrolyte (PEC) nanocomplex. Conditions of each formulation were adopted for optimal drug loading. Physico-chemical characterization of the prepared formulations (particle size, polydispersity index and zeta-potential) exhibited stable monodispersed nanoparticles. RH was radiolabeled by I-131 radiotracer in a high-radiochemical yield. Biodistribution and brain targeting of RH from the prepared formulations were studied after administration of ¹³¹ I-RH-loaded nanoparticles to albino mice via intranasal and intravenous routs. Elevated brain radioactivity was detected post IN administration of (¹³¹ I-RH/PCL-PEG/CS) nanoparticles and (¹³¹ I-RH/CS-ALG) nanoparticles comparing with the IN administrated RH solutions (C_max  = 2.8 ± 0.3, 2 ± 0.3, 0.93 ± 0.03% radioactivity/g, 1 h post administration, respectively). This demonstrated that a relatively high-brain targeting could be achieved via intranasal route of administration of RH-loaded nanoparticles. The proposed models are further potential for application to deliver many other brain-targeting therapeutics.

Pentamethylcyclopentadienyl Molybdenum(V) Complexes Derived from Iodoanilines: Synthesis, Structure, and ROP of ε-Caprolactone

The reaction of [Mo(η-C5Me5)Cl4] with the ortho-, meta-, or para-iodo-functionalized anilines 2-IC6H4NH2, 3-IC6H4NH2, 4-IC6H4NH2 yields imido or amine products of the type [Mo(η-C5Me5)Cl2(IC6H4N)] (2-I, 1, 3-I, 3, 4-I, 5) or [Mo(η-C5Me5)Cl4(IC6H4NH2)] (3-I, 2, 4-I, 4), respectively, depending on the reaction stoichiometry/conditions; we were unable to isolate an amine complex of the 2-I derivative. The reaction of [Mo(η-C5Me5)Cl4] with one equivalent of 2-I,4-FC6H3NH2 in the presence of Et3N afforded [Mo(η-C5Me5)Cl2(2-I,4-FC6H3N)]·MeCN (6·MeCN), which, upon exposure to air, afforded the Mo(VI) imido complex [Mo(η-C5Me5)Cl3(2-I,4-FC6H3N)] (7). For comparative studies, the structure of the aniline (C6H5NH2)-derived complex [Mo(η-C5Me5)Cl2(2-C6H3N)] (8) has also been prepared. The molecular structures of 1–8 have been determined and reveal packing in the form of zig-zag chains or ladders. The complexes catalyze, in the presence of benzyl alcohol under N2, the ring-opening polymerization (ROP) of ε-caprolactone affording relatively low molecular weight products. The MALDI-ToF spectra indicate that a number of polymer series bearing a variety of end groups are formed. Conducting the ROPs as melts or under air results in the isolation of higher molecular weight products, again bearing a variety of end groups. Kinetic studies reveal the aniline-derived imido complex 8 performs best, whilst a meta-iodo substituent and a Mo(V) centre are also found to be beneficial. The structures of the side products 2-IC6H4NH3Cl and 3-IC6H4NH3Cl are also reported.

Use of a Mixture of Polyols Based on Metasilicic Acid and Recycled PLA for Synthesis of Rigid Polyurethane Foams Susceptible to Biodegradation

Two polyol raw materials were obtained in the conducted research, one based on metasilicic acid (MSA), the other based on poly(lactic acid) (PLA) waste. The obtained polyols were characterized in terms of their applicability for the production of rigid polyurethane foams (RPUFs). Their basic analytical properties (hydroxyl number, acid number, elemental analysis) and physicochemical properties (density, viscosity) were determined. The assumed chemical structure of the obtained new compounds was confirmed by performing FTIR and ¹H NMR spectroscopic tests. Formulations for the synthesis of RPUFs were developed on the basis of the obtained research results. A mixture of polyols based on MSA and PLA in a weight ratio of 1:1 was used as the polyol component in the polyurethane formulation. The reference foam in these tests was a foam that was synthesized only on the basis of MSA-polyol. The obtained RPUFs were tested for basic functional properties (apparent density, compressive strength, water absorption, thermal conductivity coefficient etc.). Susceptibility to biodegradation in soil environment was also tested. It was found that the use of mixture of polyols based on MSA and PLA positively affected the properties of the obtained foam. The polyurethane foam based on this polyol mixture showed good thermal resistance and significantly reduced flammability in comparison with the foam based MSA-polyol. Moreover, it showed higher compressive strength, lower thermal conductivity and biodegradability in soil. The results of the conducted tests confirmed that the new foam was characterized by very good performance properties. In addition, this research provides information on new waste management opportunities and fits into the doctrine of sustainable resource management offered by the circular economy.

Monodisperse oligo(δ-valerolactones) and oligo(ε-caprolactones) with docosyl (C22) end-groups

Two different families of monodisperse oligoesters with α-hydroxyl-ω-docosyl (C₂₂) terminal groups [oligo(δ-valerolactone) and oligo(ϵ-caprolactone)] were isolated by flash column chromatography (FCC).

Synthesis and characterization of segmented poly(ester-urethane)s (PEUs) containing carotenoids

A series of three different xanthophylls such as lutein, zeaxanthin, and astaxanthin were used as chain extender agents in the synthesis of a new family of segmented poly(ester-urethane)s (PEUs) derived from poly(ε-caprolactone) (PCL).

Studying the catalytic activity of DBU and TBD upon water-initiated ROP of ε-caprolactone under different thermodynamic conditions

Studies performed revealed that a novel catalytic system for water-initiated ε-CL ROP based on DBU protonation showed enhanced performance under high-pressure/high-temperature conditions.

Effect of Ionizing Radiation on the Chemical Structure and the Physical Properties of Polycaprolactones of Different Molecular Weight

Polymers used in the biomedical sector can be exposed to ionizing radiation (X-ray, gamma) in vivo as implants or ex vivo for sterilization purposes (gamma, electron beam). This ionizing radiation can, at certain levels, cause degradation of the polymer. Polycaprolactones (PCL) of different molecular weights were irradiated with electron beam and the changes in their chemical structure and physical properties with the dose were evaluated. Electron beam irradiation produced crosslinking and chain scission in the PCL chain without significant predominance of one mechanism over the other. Minimum dose for gelation decreased with the increase in PCL molecular weight whereas crosslinking efficiency was almost independent of PCL molecular weight. Carboxylic groups, hydroxyl groups and new saturated hydrocarbon species were detected by proton nuclear magnetic resonance (NMR). These species were consistent with a mechanism where chain scission could take place at any bond in the PCL chain with preference in the –COO–CH₂– bond. Crosslinking decreased significantly the crystallization temperature of PCL. Tensile properties decreased continuously with the increase in dose. Irradiation with gamma rays produced a faster decay in mechanical properties than electron beam.

Morphology-dependent pH-responsive release of hydrophilic payloads using biodegradable nanocarriers

The development of functional nanocarriers with stimuli-responsive properties has advanced tremendously to serve biomedical applications such as drug delivery and regenerative medicine. However, the development of biodegradable nanocarriers that can be loaded with hydrophilic compounds and ensure its controlled release in response to changes in the surrounding environment still remains very challenging. Herein, we achieved such demands via the preparation of aqueous core nanocapsules using a base-catalyzed interfacial reaction employing a diisocyanate monomer and functional monomers/polymers containing thiol and hydroxyl functionalities at the droplet interface. pH-responsive poly(thiourethane–urethane) nanocarriers with ester linkages were synthesized by incorporating polycaprolactone diol, which is susceptible to hydrolytic degradation via ester linkages, as a functional monomer in the reaction formulation. We could demonstrate that by systematically varying the number of biodegradable segments, the morphology of the nanocarriers can be tuned without imparting the efficient encapsulation of hydrophilic payload (>85% encapsulation efficiency) and its transfer from organic to aqueous phase. The developed nanocarriers allow for a fast release of hydrophilic payload that depends on pH, the number of biodegradable segments and nanocarrier morphology. Succinctly put, this study provides important information to develop pH-responsive nanocarriers with tunable morphology, using interfacial reactions in the inverse miniemulsion process, by controlling the number of degradable segments to adjust the release profile depending on the type of application envisaged.

The morphology and release properties of aqueous core nanocapsules for the pH-responsive release of hydrophilic payload was investigated by systematically varying the number of biodegradable segments.

Enzyme-Degradable Hybrid Polymer/Silica Microbubbles as Ultrasound Contrast Agents

The fabrication of an enzyme-degradable polymer/silica hybrid microbubble is reported that produces an ultrasound contrast image. The polymer, a triethoxysilane end-capped polycaprolactone (SiPCL), is used to incorporate enzyme-degradable components into a silica microbubble synthesis, and to impart increased elasticity for enhanced acoustic responsiveness. Formulations of 75, 85, and 95 wt % SiPCL in the polymer feed produced quite similar ratios of SiPCL and silica in the final bubble but different surface properties. The data suggest that different regions of the microbubbles were SiPCL-rich: the inner layer next to the polystyrene template core and the outer surface layer, thereby creating a sandwiched silica-rich layer of the bubble shell. Overall, the thickness of the microbubble shell was dependent on the starting TEOS concentration and the reaction time. Despite the layered structure, the microbubble could be efficiently degraded by lipase enzyme, but was stable without enzyme. The ultrasound contrast showed a general trend of increase in image intensity with SiPCL feed ratio, although the 95 wt % SiPCL bubbles did not produce a contrast image, probably due to bubble collapse. At higher normalized peak negative acoustic pressure (mechanical index, MI), a nonlinear frequency response also emerges, characterized by the third harmonic at around 3f0, and increases with MI. The threshold MI transition from linear to nonlinear response increased with decrease in SiPCL.

Molybdenum complexes derived from the oxydianiline [(2-NH2C6H4)2O]: synthesis, characterization and ε-caprolactone ROP capability

Imido containing molybdenum complexes, structurally characterized from reactions involving 2,2′-oxydianiline with either Na₂MoO₄ or Mo(NtBu)₂Cl₂(DME), can ring open polymerize ε-caprolactone with good conversion at 100 °C.

Ring-opening polymerization of ε-caprolactone by lithium piperazinyl-aminephenolate complexes: synthesis, characterization and kinetic studies

A series of lithium complexes were prepared from 2(N-piperazinyl-N'-methyl)-2-methylene-4-R'-6-R-phenols ([ONN](RR')) and characterized through elemental analysis, (1)H and (13)C{(1)H} NMR spectroscopy, and X-ray crystallography. Treatment of the ligands with n-butyllithium afforded {Li[ONN](RR')}(3) [R = Me, R' = (t)Bu, (1); R = R' = (t)Bu (2); R = R' = (t)Am, (3), (t)Am = C(CH(3))(2)CH(2)CH(3)], with trimetallic structures in the solid-state as shown by single-crystal X-ray diffraction. The reactivity of these complexes in the ring-opening polymerization of ε-caprolactone (ε-CL), as well as the influences of monomer concentration, monomer/Li molar ratio, polymerization temperature and time, was studied. Rates of polymerization were first order with respect to both monomer and lithium concentrations, and activation energies for the reactions were determined. MALDI-TOF MS analysis revealed that transesterification had occurred during the polymerization.