Low Modulus Dry Silicone-Gel Materials by Photoinduced Thiol–Ene Chemistry

Vat Photopolymerization 3D-Printing of Dynamic Thiol-Acrylate Photopolymers Using Bio-Derived Building Blocks

As an energy-efficient additive manufacturing process, vat photopolymerization 3D-printing has become a convenient technology to fabricate functional devices with high resolution and freedom in design. However, due to their permanently crosslinked network structure, photopolymers are not easily reprocessed or repaired. To improve the environmental footprint of 3D-printed objects, herein, we combine the dynamic nature of hydroxyl ester links, undergoing a catalyzed transesterification at elevated temperature, with an acrylate monomer derived from renewable resources. As a sustainable building block, we synthesized an acrylated linseed oil and mixed it with selected thiol crosslinkers. By careful selection of the transesterification catalyst, we obtained dynamic thiol-acrylate resins with a high cure rate and decent storage stability, which enabled the digital light processing (DLP) 3D-printing of objects with a structure size of 550 µm. Owing to their dynamic covalent bonds, the thiol-acrylate networks were able to relax 63% of their initial stress within 22 min at 180 °C and showed enhanced toughness after thermal annealing. We exploited the thermo-activated reflow of the dynamic networks to heal and re-shape the 3D-printed objects. The dynamic thiol-acrylate photopolymers also demonstrated promising healing, shape memory, and re-shaping properties, thus offering great potential for various industrial fields such as soft robotics and electronics.

The Use of the Thiol-Ene Addition Click Reaction in the Chemistry of Organosilicon Compounds: An Alternative or a Supplement to the Classical Hydrosilylation?

This review presents the main achievements in the use of the thiol-ene reaction in the chemistry of silicones. Works are considered, starting from monomers and ending with materials.The main advantages and disadvantages of this reaction are demonstrated using various examples. A critical analysis of the use of this reaction is made in comparison with the hydrosilylation reaction.

Photopatternable Poly(dimethylsiloxane) (PDMS) for an Intrinsically Stretchable Organic Electrochemical Transistor

Patterning elastomers is an essential process for the application of elastomers to stretchable bioelectric devices. In general, replication of a mold and laser ablation are used for patterning elastomers. However, these methods are inefficient and time consuming due to complex patterning procedures and a heat-induced curing mechanism. In this work, we developed a photopatternable elastomer called thiol-ene cross-linked poly(dimethylsiloxane) (TC-PDMS). TC-PDMS showed high-resolution patternability (∼100 μm) through a direct patterning process. It also had high stretchability (∼140%) and low Young's modulus (∼2.9 MPa) similar to conventional PDMS. To demonstrate its practicability in stretchable bioelectric devices, TC-PDMS was applied to a passivation layer of an intrinsically stretchable organic electrochemical transistor (OECT), which showed a low leakage current (∼20 μA) and a high transconductance (0.432 mS) at high strain (60%). The stretchable OECT was able to record electrocardiographic (ECG) signals from human skin, and the measured ECG signals exhibited a high signal-to-noise ratio of 12.2 dB.

Polyester-Polysiloxane Hyperbranched Block Polymers for Transparent Flexible Materials

Highly transparent flexible silicone elastomers are useful for certain stretchable electronics and various types of smart devices. Polyester-polysiloxane hyperbranched block copolymers are synthesized by ring-opening polymerization of octamethylcyclotetrasiloxane initiated by macromolecular lithium alkoxide. Treatment of these copolymers with tetraethoxysilane and dibutylin dilaurate at room temperature gives the corresponding transparent elastic materials. The transparency of the materials can reach 90% (700-800 nm), and the starting thermal decomposition temperatures of the materials are higher than 330 °C. Very interestingly, though the highest tensile strength of the material prepared is about 0.48 MPa, the elongation at break can reach 778-815%. The results will inspire us to develop highly transparent flexible silicone materials by designing copolymers of silicone materials and hyperbranched polymers.

Recyclable sulfone-containing polymersviaring-opening polymerization of macroheterocyclic siloxane monomers: synthesis, properties and recyclability

The first recyclable sulfone-containing polysiloxanes were synthesizedviaan anionic ring-opening polymerization of macroheterocyclic siloxane monomers.

Synthesis and characterization of aromatic-PDMS segmented block copolymers and their shape-memory performance

Aromatic-PDMS (AB)_n multiblock copolymers: a one-component polymeric system that combines excellent mechanical properties with shape memory capability.

Mechanically dynamic PDMS substrates to investigate changing cell environments

Mechanics of the extracellular matrix (ECM) play a pivotal role in governing cell behavior, such as cell spreading and differentiation. ECM mechanics have been recapitulated primarily in elastic hydrogels, including with dynamic properties to mimic complex behaviors (e.g., fibrosis); however, these dynamic hydrogels fail to introduce the viscoelastic nature of many tissues. Here, we developed a two-step crosslinking strategy to first form (via platinum-catalyzed crosslinking) networks of polydimethylsiloxane (PDMS) and then to increase PDMS crosslinking (via thiol-ene click reaction) in a temporally-controlled manner. This photoinitiated reaction increased the compressive modulus of PDMS up to 10-fold within minutes and was conducted under cytocompatible conditions. With stiffening, cells displayed increased spreading, changing from ∼1300 to 1900 μm² and from ∼2700 to 4600 μm² for fibroblasts and mesenchymal stem cells, respectively. In addition, higher myofibroblast activation (from ∼2 to 20%) for cardiac fibroblasts was observed with increasing PDMS substrate stiffness. These results indicate a cellular response to changes in PDMS substrate mechanics, along with a demonstration of a mechanically dynamic and photoresponsive PDMS substrate platform to model the dynamic behavior of ECM.

Photo-responsive thiol–ene networks for the design of switchable polymer patterns

Photo-patternable thiol–ene networks are prepared by combining versatile o-NBE chemistry with the distinctive advantages of a typical “click” reaction.

Ultrafast diffusion-controlled thiol–ene based crosslinking of silicone elastomers with tailored mechanical properties for biomedical applications

Thiol-ene coupling enables the metal-free ultra-fast (seconds) crosslinking of polysiloxanes.

A rapid and facile preparation of novel macroporous silicone-based cryogels via photo-induced thiol–ene click chemistry

We prepared novel cryogels via facile thiol–ene reaction at low temperatures, which can selectively remove oils with excellent recyclability.

Toward the development of a versatile functionalized silicone coating

The development of a versatile silicone copolymer coating prepared by the chemical coupling of trichlorosilane (TCS) to the vinyl groups of poly(vinylmethylsiloxane) (PVMS) is reported. The resultant PVMS-TCS copolymer can be deposited as a functional organic layer on a hydrophobic poly(dimethylsiloxane) substrate and its mechanical modulus can be regulated by varying the TCS coupling ratio. In this paper, several case studies demonstrating the versatile properties of these PVMS-TCS functional coatings on PDMS elastomer substrates are presented. Numerous experimental probes, including optical microscopy, Fourier-transform infrared spectroscopy, surface contact angle, ellipsometry, and nanoindentation, are utilized to interrogate the physical and chemical characteristics of these PVMS-TCS coatings.