Rainbow radiating single-crystal Ag nanowire nanoantenna

Nanowire dimer optical antenna brightens the surface defects of silicon

Plasmonic hot spots located between metallic dimer nanostructures have been utilized comprehensively to achieve efficient light emission. However, different from the enhancement occurred in the plasmonic hot spot, the investigation of light emission off the hot spot on submicron scale remains challenge. In this work, we have constructed a plasmonic nanowire dimer (NWD) system to brighten the light emission of the surface defects of silicon off the hot spot on the submicron scale. The NWD can trap light through plasmonic gap, then, the excited emitter on the submicron scale can radiate light efficiently by coupling with the dipole gap plasmonic mode. Furthermore, the coupling of dipole plasmonic mode with the emitters can be tuned by changing the gap size, and then photoluminescence emission was drastically enhanced up to 126 folds. Theoretical simulations reveal the photoluminescence enhancement arises from the combination of the NWD's high radiation efficiency, Purcell enhancement, efficient redirection of the emitted photoluminescence and the excitation enhancement. In this study, the photoluminescence signal can be effectively enhanced by placing nano-antenna patch on the detected low-quantum-efficiency emitters, which may open up a pathway toward controlling plasmonic gap mode enhanced light emission off the hot spot on submicron scale.

Correlations between incident and emission polarization in nanowire-particle coupled junctions

Plasmonic nanostructures with subwavelength confinement are of great importance for the development of integrated nanophotonic circuits and devices. Here, we experimentally investigate how the polarization of the emitted light from nanowire-particle junction relies on the incident polarization. We demonstrate that the correlations can be effectively modulated by the particle position relative to the wire. By varying the wire-particle gap with only several nanometers, the nanowire-particle junction can be changed from polarization maintainer to rotator. Then, by moving the particle along the wire within half of the surface plasmon polariton (SPP) beat, the polarization behaviors can be tuned from positive to negative correlation. The mechanism can be well understood by the hybridization of wire-particle coupled mode and propagating SPP modes, which is verified by finite-difference time-domain simulations. These findings would provide a new degree of freedom for manipulating light polarization at the nanometer scale and additional flexibility for constructing nanophotonic devices.

Atomically Flat Au Nanoplate Platforms Enable Ultraspecific Attomolar Detection of Protein Biomarkers

Atomically flat surfaces of single-crystalline Au nanoplates can maximize the functionality of biomolecules, thus realizing extremely high-performance biosensors. Here, we report both highly specific and supersensitive detection of C-reactive protein (CRP) by employing atomically flat Au nanoplates. CRP is a protein biomarker for inflammation and infection and can be used as a predictive or prognostic marker for various cardiovascular diseases. To maximize the binding capacity for CRP, we carefully optimized the Au nanoplate-Cys3-protein G-anti-CRP structure by observing atomic force microscopy (AFM) images. The optimally anti-CRP-immobilized Au nanoplates allowed extremely specific detection of CRP at the attomolar level. To confirm the binding of CRP onto the Au nanoplate, we assembled Au nanoparticles (NPs) onto the CRP-captured Au nanoplate by sandwich immunoreaction and obtained surface-enhanced Raman scattering (SERS) spectra and scanning electron microscopy (SEM) images. Both the SERS and SEM results showed that we completely eliminated the nonspecific binding of Au NPs onto the optimally anti-CRP-immobilized Au nanoplate. Compared with the anti-CRP-immobilized rough Au film and the randomly anti-CRP-attached Au nanoplate, the optimally anti-CRP-immobilized Au nanoplate provided a highly improved detection limit of 10^-17 M. In this study, it was validated that ultraclean and ultraflat Au nanoplates can maximize the sensing capability of CRP. We expect that these Au nanoplates will enable the feasible detection of many important biomarkers with high specificity and high sensitivity.

Progress and Opportunities in Soft Photonics and Biologically Inspired Optics

Optical components made fully or partially from reconfigurable, stimuli-responsive, soft solids or fluids-collectively referred to as soft photonics-are poised to form the platform for tunable optical devices with unprecedented functionality and performance characteristics. Currently, however, soft solid and fluid material systems still represent an underutilized class of materials in the optical engineers' toolbox. This is in part due to challenges in fabrication, integration, and structural control on the nano- and microscale associated with the application of soft components in optics. These challenges might be addressed with the help of a resourceful ally: nature. Organisms from many different phyla have evolved an impressive arsenal of light manipulation strategies that rely on the ability to generate and dynamically reconfigure hierarchically structured, complex optical material designs, often involving soft or fluid components. A comprehensive understanding of design concepts, structure formation principles, material integration, and control mechanisms employed in biological photonic systems will allow this study to challenge current paradigms in optical technology. This review provides an overview of recent developments in the fields of soft photonics and biologically inspired optics, emphasizes the ties between the two fields, and outlines future opportunities that result from advancements in soft and bioinspired photonics.

Subwavelength core/shell cylindrical nanostructures for novel plasmonic and metamaterial devices

In this review, we introduce novel plasmonic and metamaterial devices based on one-dimensional subwavelength nanostructures with cylindrical symmetry. Individual single devices with semiconductor/metal core/shell or dielectric/metal core/multi-shell structures experience strong light-matter interaction and yield unique optical properties with a variety of functions, e.g., invisibility cloaking, super-scattering/super-absorption, enhanced luminescence and nonlinear optical activities, and deep subwavelength-scale optical waveguiding. We describe the rational design of core/shell cylindrical nanostructures and the proper choice of appropriate constituent materials, which allow the efficient manipulation of electromagnetic waves and help to overcome the limitations of conventional homogeneous nanostructures. The recent developments of bottom-up synthesis combined with the top-down fabrication technologies for the practical applications and the experimental realizations of 1D subwavelength core/shell nanostructure devices are briefly discussed.

Photonic Applications of Metal-Dielectric Heterostructured Nanomaterials

Metal materials, supporting plasmon modes on their surface, can confine the optical field at deep subwavelength scale, which is desired for photonic integration. However, their intrinsic high Ohmic losses make it impossible to construct the whole circuit solely with the metal materials. Integrating the plasmonic components with dielectric materials may offer a solution to this dilemma. With outstanding active optical performance, these dielectric components not only can greatly reduce the optical losses of the entire circuits but also offer an efficient way to launch the surface plasmon polaritons through the evanescent field coupling or the direct exciton-plasmon conversion. Furthermore, the cooperative interaction between metal and dielectric materials would bring vast novel optical phenomena and functional photonic devices. In this review, the synergistic effects among metal and dielectric materials in various heterostructures as well as their related applications are highlighted. Comprehensive understanding on their synergistic interactions would offer useful guidance for the design and fabrication of the ultracompact novel optical devices.

Design of high Q-factor metallic nanocavities using plasmonic bandgaps

The surface plasmon polariton modes often excited in metallic nanocavities enable the miniaturization of photonic devices, even beyond the diffraction limit, yet their severe optical losses deteriorate device performance. This study proposes a design of metallic nanorod cavities coupled to plasmonic crystals with the aim of reducing the radiation loss of surface plasmon modes. Periodic Ag disks placed on an insulator-metal substrate open a substantial amount of plasmonic bandgaps (e.g., Δλ=290  nm at λ=1550  nm) by modifying their diameter and thickness. When an Ag nanorod with a length of ∼400  nm is surrounded by the periodic Ag disks, its Q-factor increases up to 127, yielding a 16-fold enhancement compared with a bare Ag nanorod, while its mode volume can be as small as 0.03(λ/2n)³. Ag nanorods with gradually increasing lengths exhibit high Q-factor plasmonic modes that are tunable within the plasmonic bandgap. These numerical studies on low-radiation-loss plasmonic modes excited in metallic nanocavities will promote the development of ultrasmall plasmonic devices.

Supramolecular Construction of Multifluorescent Gels: Interfacial Assembly of Discrete Fluorescent Gels through Multiple Hydrogen Bonding

Multifluorescent supramolecular gels with complex structures are constructed from discrete fluorescent gels, which serve as the building blocks, through hydrogen bonding interactions at interfaces. The multifluorescent gel can realize rapid healing within only ≈100 s.

Resonant light scattering from a single dielectric nano-antenna formed by electron beam-induced deposition

Dielectric nano-antennas are promising elements in nanophotonics due to their low material loss and strong leaky-mode optical resonances. In particular, light scattering can be easily manipulated using dielectric nano-antennas. To take full advantage of dielectric nano-antennas and explore their new optical applications, it is necessary to fabricate three-dimensional nano-structures under arbitrary conditions such as in non-planar substrates. Here, we demonstrate full-visible-range resonant light scattering from a single dielectric optical nano-rod antenna. The nano-rod antenna was formed by electron beam-induced deposition (EBID), a promising three-dimensional nanofabrication technique with a high spatial resolution. The nano-rods consist of amorphous alloys of C and O, with a width of 180 nm on average and a length of 4.5 μm. Polarization-resolved dark-field scattering measurements show that both transverse-electric and transverse-magnetic mode resonances cover the full visible range as the height of the nano-rod antenna varies from 90 to 280 nm. Numerical simulations successfully reproduce the measured scattering features and characterize the modal properties, using the critical points dispersive dielectric constant of the EBID carbonaceous material. Our deep understanding of resonant light scattering in the EBID dielectric nano-antenna will be useful for near-field measurement or for the implementation of three-dimensional nanophotonic devices.

Full three-dimensional power flow analysis of single-emitter-plasmonic-nanoantenna system

We present a full three-dimensional (3D) power flow analysis of an emitter-nanoantenna system. A conventional analysis, based on the total Poynting vector, calculates only the coupling strength in terms of the Purcell enhancement. For a better understanding of the emitter-nanoantenna system, not only the Purcell enhancement but also complete information on the energy transfer channels is necessary. The separation of the pure scattering and emitter output Poynting vectors enables the quantification of the individual energy transfer channels. Employing the finite-difference time-domain method (FDTD), we examine a nanodisk antenna that supports the bright dipole and dark quadrupole resonance modes for which the power flow characteristics are completely distinct, and we analyze the power flow enhancements to the energy transfer channels with respect to the wavelength, polarization, and position of the emitter coupled to the antenna. The 3D power flow analysis reveals how the constructive or destructive interference between the emitter and the antenna resonance mode affects the power flow enhancements and the far-field radiation pattern. Our proposed power flow analysis should play a critical role in characterizing the emitter-antenna system and customizing its energy transfer properties for desired applications.

Excitation of surface plasmons from silver nanowires embedded in polymer nanofibers

We report an excitation of surface plasmons in silver nanowires (AgNWs) which were embedded in flexible polymer nanofibers. Using waveguiding excitation, surface plasmons in AgNWs were excited and propagated. By directing light of 650, 532, and 473 nm wavelengths into the nanofiber, surface plasmons in an embedded single AgNW (average diameter 400 nm, length 4.3 μm) were excited and the corresponding propagation lengths for the three wavelengths are 10.6, 7.7, and 5.1 μm. It was also found that, when a spatially incoherent white light of a halogen lamp with an excitation optical power of 80 μW was coupled into the polymer nanofiber, a surface plasmon mediated interference fringe was observed. In addition, on the basis of surface plasmon excitation, two adjacent AgNWs embedded in the polymer nanofibers were demonstrated to serve as coupled plasmonic waveguides.

Insulin templated synthesis of single-crystalline silver nanocables with ultrathin Ag cores

Ultrathin single-crystalline silver nanocables (13 nm core diameter, 1.5 nm sheath thickness) were self-assembled by using insulin fibril templates.

A twin-free single-crystal Ag nanoplate plasmonic platform: hybridization of the optical nano-antenna and surface plasmon active surface

Surface plasmons based on metallic nanostructures enable light manipulation beyond the optical diffraction limit. We have epitaxially synthesized twin-free single-crystal Ag nanoplates on SrTiO3 substrates. Unlike the nanoplates synthesized in a solution phase, these nanoplates have perfectly clean surfaces as well as a quite large size of tens of micrometers. As-synthesized defect-free single-crystal Ag nanoplates have an atomically flat surface and sides with well-defined angles, allowing long distance propagation of surface plasmons and highly reliable plasmonic integration. By spatially separating receiving and transmitting antennas and plasmonically interfacing them, the signal quality of transmission/reception can be largely improved. Furthermore, by combining sub-dimensional nanostructures onto the two-dimensional space effective hierarchical plasmonic nano-complexes can be built up. Theoretical simulations well reproduced unique experimental results of coupling between SPPs and free-space radiation by the nanoplate antenna sides, low-loss long-range SPP propagation, and tunneling or scattering of SPPs at a nano-gap as well as a nano-structure introduced on the nanoplate. The single-crystal Ag nanoplate will find superb applications in plasmonic nano-circuitry and lab-on-a-chip for biochemical sensing.

Design of plasmonic nano-antenna for total internal reflection fluorescence microscopy

We propose a gold modified bow-tie plasmonic nano-antenna, which can be suitably used in combination with total internal reflection fluorescence microscopy. The plasmonic nano-antenna, supporting well-separated multiple resonances, not only concentrates the total internal reflection evanescent field at the deep subwavelength scale, but also enhances fluorescence emission by the Purcell effect. Finite-difference time-domain computations show that the enhancement of the excitation light strongly correlates with the far-field radiation pattern radiated from the antenna. Depending on the antenna geometry, the resonant modes are widely tuned and their wavelengths can be easily matched to the diverse emission or excitation wavelengths of fluorophores.

Speedy fabrication of diameter-controlled Ag nanowires using glycerol under microwave irradiation conditions

Diameter-controlled Ag nanowires were rapidly fabricated (1 min) using inexpensive, abundant, and environmentally-friendly glycerol as both a reductant and solvent under non-stirred microwave irradiation conditions; no Ag particles were formed using conventional heating methods. The temperature and pressure of the reaction systems were monitored to investigate the role of microwaves in the assembly of nanowires.