Microwave-assisted synthesis of a core-shell MWCNT/GONR heterostructure for the electrochemical detection of ascorbic acid, dopamine, and uric acid

Alumina inorganic molecularly imprinted polymer modified multi-walled carbon nanotubes for uric acid detection in sweat

Alumina inorganic molecularly imprinted polymer (MIP) modified multi-walled carbon nanotubes (MWCNTs) on a glassy carbon electrode (MWCNTs-Al2O3-MIP/GCE) was firstly designed and fabricated by one-step electro deposition technique for the detection of uric acid (UA) in sweat. The UA templates were embedded within the inorganic MIP by co-deposition with Al2O3. Through the evaluation of morphology and structure by Field Emission Scanning Electron Microscope (SEM), Energy Dispersive X-ray Spectroscopy (EDS), X-ray Photoelectron Spectroscopy (XPS) and Transmission Electron Microscopy (TEM), it was verified that the specific recognition sites can be fabricated in the electrodeposited Al2O3 molecular imprinted layer. Due to the high selectivity of molecular imprinting holes, the MWCNTs-Al2O3-MIP/GCE electrode demonstrated an impressive imprinting factor of approximately 2.338 compared to the non-molecularly imprinted glassy carbon electrode (MWCNTs-Al2O3-NIP/GCE) toward uric acid detection. Moreover, it exhibited a remarkable limit of detection (LOD) of 50 nM for UA with wide detection range from 50 nM to 600 μM. The MWCNTs-Al2O3-MIP/GCE electrode also showed strong interference resistance against common substances found in sweat. These results highlight the excellent interference resistance and selectivity of MWCNTs-Al2O3-MIP/GCE sensor, positioning it as a novel sensing platform for non-invasive uric acid detection in human sweat.

A facile fluorescence Eu MOF sensor for ascorbic acid and ascorbate oxidase detection

In this work, a facile fluorescence Eu3+-based metal-organic framework (Eu MOF) sensor for ascorbic acid (AA) and ascorbate oxidase (AAO) detection was developed. The fluorescence of the Eu MOF could be effectively quenched by Ce3+ but not by Ce4+ at an appropriate concentration, and thus, when the reductant AA was added into the solution containing Ce4+, Ce4+ was chemically reduced to Ce3+, which induced the decreased fluorescence signal of the Eu MOF. However, when AAO was introduced, AA was effectively oxidized to dehydroascorbic acid (DHAA) under the catalysis of AAO, and thus, Ce4+ could not be reduced, resulting in the fluorescence restoration of the Eu MOF. Hence, the concentration of AA and AAO could be determined by the fluorescence decrease and restoration of the Eu MOF. The fluorescent platform showed high sensitivity with a limit of detection of 0.32 μM for AA and 1.18 U L-1 for AAO, respectively. Moreover, the proposed method was successfully applied for AA and AAO determination in real samples, indicating great potential for biomedical application in complex matrices.

Point-of-Care Detection of Antioxidant in Agarose-Based Test Strip through Antietching of Au@Ag Nanostars

Antioxidants are crucial for human health, and the detection of antioxidants can provide valuable information for disease diagnosis and health management. In this work, we report a plasmonic sensing approach for the determination of antioxidants based on their antietching capacity toward plasmonic nanoparticles. The Ag shell of core-shell Au@Ag nanostars can be etched by chloroauric acid (HAuCl₄), whereas antioxidants can interact with HAuCl₄, which prevents the surface etching of Au@Ag nanostars. We modulate the thickness of the Ag shell and morphology of the nanostructures, showing that the core-shell nanostars with the smallest thickness of Ag shell have the best etching sensitivity. Owing to the extraordinary surface plasmon resonance (SPR) property of Au@Ag nanostars, the antietching effect of antioxidants can induce a significant change in both the SPR spectrum and the color of solution, facilitating both the quantitative detection and naked-eye readout. This antietching strategy enables the determination of antioxidants such as cystine and gallic acid with a linear range of 0.1-10 μM. The core-shell Au@Ag nanostars are further immobilized in agarose gels to fabricate test strips, which can display different color changes in the presence of HAuCl₄ from 0 to 1000 μM. The agarose-based test strip is also capable of detecting antioxidants in real samples, which allows naked-eye readout and quantitative detection by a smartphone.

4-Cyanophenol herbicide sensor using multi-walled carbon nanotube embedded dual-microporous polypyrrole nanoparticles as metal-free and environmentally friendly hybrid electrode

A highly sensitive 4-cyanophenol (4-CP) sensor was fabricated using multi-walled carbon nanotube (MWCNT)-embedded dual-microporous polypyrrole nanoparticle-modified screen-printed carbon electrodes (SPCE/DMPPy/MWCNT). The well-defined dual pores of DMPPy and MWCNT (~ 0.53 and ~ 0.65 nm) acted as good analyte absorption agents (shortening the ion diffusion path) and conducting agents (reducing the internal electron-transfer resistance). This enhanced electrical conductivity resulted in the improved electro-oxidation of 4-CP. A higher sensitivity (19.0 μA μM^-1 cm^-2) and lower limit of detection (0.8 nM) were achieved with a wide detection range of 0.001-400 µM (R² = 0.9988). The proposed sensor exhibited excellent recovery of 4-CP in real-world samples. Therefore, the SPCE/DMPPy/MWCNT sensor is regarded highly suitable for rapidly detecting 4-CP.

Ultrafast materials synthesis and manufacturing techniques for emerging energy and environmental applications

Energy and environmental issues have attracted increasing attention globally, where sustainability and low-carbon emissions are seriously considered and widely accepted by government officials. In response to this situation, the development of renewable energy and environmental technologies is urgently needed to complement the usage of traditional fossil fuels. While a big part of advancement in these technologies relies on materials innovations, new materials discovery is limited by sluggish conventional materials synthesis methods, greatly hindering the advancement of related technologies. To address this issue, this review introduces and comprehensively summarizes emerging ultrafast materials synthesis methods that could synthesize materials in times as short as nanoseconds, significantly improving research efficiency. We discuss the unique advantages of these methods, followed by how they benefit individual applications for renewable energy and the environment. We also highlight the scalability of ultrafast manufacturing towards their potential industrial utilization. Finally, we provide our perspectives on challenges and opportunities for the future development of ultrafast synthesis and manufacturing technologies. We anticipate that fertile opportunities exist not only for energy and the environment but also for many other applications.

Cyclophosphazene Intrinsically Derived Heteroatom (S, N, P, O)-Doped Carbon Nanoplates for Ultrasensitive Monitoring of Dopamine from Chicken Samples

A novel, metal-free electrode based on heteroatom (S, N, P, O)-doped carbon nanoplates (SNPO-CPL) modifying lead pencil graphite (LPG) has been synthesized by carbonizing a unique heteroatom (S, N, P, O)-containing novel polymer, poly(cyclcotriphosphazene-co-2,5-dioxy-1,4-dithiane) (PCD), for precise screening of dopamine (DA). The designed electrode, SNPO-CPL-800, with optimized percentage of S, N, P, O doping through the sp2-carbon chain, and a large number of surface defects (thus leading to a maximum exposition number of catalytic active sites) led to fast molecular diffusion through the micro-porous structure and facilitated strong binding interaction with the targeted molecules in the interactive signaling transducer at the electrode-electrolyte interface. The designed SNPO-CPL-800 electrode exhibited a sensitive and selective response towards DA monitoring, with a limit of detection (LOD) of 0.01 nM. We also monitored DA levels in commercially available chicken samples using the SNPO-CPL-800 electrode even in the presence of interfering species, thus proving the effectiveness of the designed electrode for the precise monitoring of DA in real samples. This research shows there is a strong potential for opening new windows for ultrasensitive DA monitoring with metal-free electrodes.

Insights on synthesis and applications of graphene-based materials in wastewater treatment: A review

Graphene has excellent unique thermal, chemical, optical, and mechanical properties such as high thermal conductivity, high chemical stability, optical transmittance, high current density, higher surface area, etc. Due to their outstanding properties, the attention towards graphene-based materials and their derivatives in wastewater treatment has been increased in recent times. Different graphene-based materials such as graphene oxides, graphene quantum dots, graphene nanoplatelets, graphene nanoribbons and other graphene-based nanocomposites are synthesized through chemical vapor deposition, mechanical and electrochemical exfoliation of graphite. In this review, the specifics about the graphenes and their derivatives, the synthesis strategy of graphene-based materials are described. This review critically explained the applications of graphene-based materials in wastewater treatment. Graphene-based materials were utilized as adsorbents, electrodes, and photocatalysts for the efficient removal of toxic pollutants such as heavy metals, dyes, pharmaceutics, antibiotics, phenols, polycyclic aromatic hydrocarbons have been highlighted and discussed. Herein, the potential scope of graphene-based material in the field of wastewater treatment is critically reviewed. In addition, a brief perspective on future research directions and difficulties in the synthesis of graphene-based material are summarized.

Advances in the development of electrode materials for improving the reactor kinetics in microbial fuel cells

Microbial fuel cells (MFCs) are an emerging technology for converting organic waste into electricity, thus providing potential solution to energy crises along with eco-friendly wastewater treatment. The electrode properties and biocatalysts are the major factors affecting electricity production in MFC. The electrons generated during microbial metabolism are captured by the anode and transferred towards the cathode via an external circuit, causing the flow of electricity. This flow of electrons is greatly influenced by the electrode properties and thus, much effort has been made towards electrode modification to improve the MFC performance. Different semiconductors, nanostructured metal oxides and their composite materials have been used to modify the anode as they possess high specific surface area, good biocompatibility, chemical stability and conductive properties. The cathode materials have also been modified using metals like platinum and nano-composites for increasing the redox potential, electrical conductivity and surface area. Therefore, this paper reviews the recent developments in the modification of electrodes towards improving the power generation capacity of MFCs.

Achievements of Graphene and Its Derivatives Materials on Electrochemical Drug Assays and Drug-DNA Interactions

Graphene, emerging as a true two-dimensional (2D) material, has attracted increasing attention due to its unique physical and electrochemical properties such as high surface area, excellent conductivity, high mechanical strength, and ease of functionalization and mass production. The entire scientific community recognizes the significance and potential impact of graphene. Electrochemical detection strategies have advantages such as being simple, fast, and low-cost. The use of graphene as an excellent interface for electrode modification provides a promising way to construct more sensitive and stable electrochemical (bio)sensors. The review presents sensors based on graphene and its derivatives for electrochemical drug assays from pharmaceutical dosage forms and biological samples. Future perspectives in this rapidly developing field are also discussed. In addition, the interaction of several important anticancer drug molecules with deoxyribonucleic acid (DNA) that was immobilized onto graphene-modified electrodes has been detailed in terms of dosage regulation and utility purposes.

Construction of a Au@MoS2 composite nanosheet biosensor for the ultrasensitive detection of a neurotransmitter and understanding of its mechanism based on DFT calculations

MoS₂ nanosheets can be applied as electrochemical biosensors to selectively and sensitively respond to the surrounding environment and detect various biomolecules due to their large specific surface area and unique physicochemical properties. In this paper, single-layer or few-layer MoS₂ nanosheets were prepared by an improved liquid phase stripping method, and then combining the unique material characteristics of MoS₂ and the metallic property of Au nanoparticles (AuNPs), Au@MoS₂ composite nanosheets were synthesized based on MoS₂ nanosheets. Then, the structure and properties of MoS₂ nanosheets and Au@MoS₂ composite nanosheets were comprehensively characterized. The results proved that AuNPs were successfully loaded on MoS₂ nanosheets. At the same time, on the basis of the successful preparation of Au@MoS₂ composite nanosheets, an electrochemical biosensor targeting dopamine was successfully constructed by cyclic voltammetry. The linear detection range was 0.5–350 μM, and the detection limit was 0.2 μM. The high-sensitive electrochemical detection of dopamine has been achieved, which provides a new idea for the application of MoS₂-based nanomaterials in the biosensing of neurotransmitters. In addition, density functional theory (DFT) was used to explore the electrochemical performance of Au@MoS₂ composite nanosheets. The results show that the adsorption of Au atoms on the MoS₂ 2D structure improves the conductivity of MoS₂ nanosheets, which theoretically supports the possibilities of its application as a platform for the ultrasensitive detection of neurotransmitters or other biomolecules in the field of disease diagnosis.

An electrochemical biosensor based on Au@MoS₂ composite nanosheets was successfully prepared for the high-sensitivity detection of dopamine.

Molten-salt-composite of Pyrite and Silver Nanoparticle as Electrocatalyst for Hydrogen Peroxide Sensing

A conductive molten salt was synthesized by using natural pyrite (PR) and silver nanoparticles (Ag) at 450°C using a molten salt method. The molten-salt-composite (PR/Ag) was used as an electrocatalyst to detect hydrogen peroxide (H₂O₂). The as-prepared PR/Ag possessed higher conductivity than natural PR. It exhibited a high sensitivity of 603.54 μA mM^-1 cm^-2 for the detection of H₂O₂, with a linear range of 0.1 to 30 mM, and a detection limit of 0.02 mM (S/N = 3). In addition, the PR/Ag sensor exhibited good selectivity to H₂O₂, resisting interference from other potential interferent compounds (e.g. uric acid, glucose, fructose and common metal ions (K⁺, Mg²⁺, Na⁺)). The approach is considered to provide a sensitive, selective, and reliable tool for highly detection of H₂O₂.

Visible-Light-Assisted Photoelectrochemical Biosensing of Uric Acid Using Metal-Free Graphene Oxide Nanoribbons

In this study, we demonstrate the visible-light-assisted photoelectrochemical (PEC) biosensing of uric acid (UA) by using graphene oxide nanoribbons (GONRs) as PEC electrode materials. Specifically, GONRs with controlled properties were synthesized by the microwave-assisted exfoliation of multi-walled carbon nanotubes. For the detection of UA, GONRs were adopted to modify either a screen-printed carbon electrode (SPCE) or a glassy carbon electrode (GCE). Cyclic voltammetry analyses indicated that all Faradaic currents of UA oxidation on GONRs with different unzipping/exfoliating levels on SPCE increased by more than 20.0% under AM 1.5 irradiation. Among these, the GONRs synthesized under a microwave power of 200 W, namely GONR(200 W), exhibited the highest increase in Faradaic current. Notably, the GONR(200 W)/GCE electrodes revealed a remarkable elevation (~40.0%) of the Faradaic current when irradiated by light-emitting diode (LED) light sources under an intensity of illumination of 80 mW/cm². Therefore, it is believed that our GONRs hold great potential for developing a novel platform for PEC biosensing.

Recent advances in graphene nanoribbons for biosensing and biomedicine

In recent years, a new type of quasi-one-dimensional graphene-based material, graphene nanoribbons (GNRs), has attracted increasing attention. The limited domain width and rich edge configurations of GNRs endow them with unique properties and wide applications in comparison to two-dimensional graphene. This review article mainly focuses on the electrical, chemical and other properties of GNRs, and further introduces the typical preparation methods of GNRs, including top-down and bottom-up strategies. Then, their biosensing and biomedical applications are highlighted in detail, such as biosensors, photothermal therapy, drug delivery, etc. Finally, the challenges and future prospects in the synthesis and application of functionalized GNRs are discussed. It is expected that GNRs will have significant practical use in biomedical applications in the future.

An ELIME assay for hepatitis A virus detection

An Enzyme Linked ImmunoMagnetic Electrochemical assay (ELIME) was developed for the detection of the hepatitis A virus (HAV). This system is based on the use of new polydopamine-modified magnetic nanobeads as solid support for the immunochemical chain, and an array of 8 screen-printed electrodes as a sensing platform. Enzymatic-by-product is quickly measured by differential pulse voltammetry. For this purpose, all analytical parameters were optimized; in particular, different blocking reagents were evaluated in order to minimize the nonspecific interaction of bioreagents. Using the ELIME assays, a quantitative determination of HAV can be achieved with a detection limit of 1·10^-11 IU mL^-1 and a working range between 10^-10 - 5 × 10^-7 IU mL^-1. The cross-reactivity of the commercial monoclonal antibodies against HAV used in ELIME assays was tested for Coxsackie B4, resulting very low. The sensitivity was also investigated and compared with spectrophotometric sandwich ELISA. The average relative standard deviation (RSD) of the ELIME method was less than 5% for the assays performed on the same day, and 7% for the measurements made on different days. The proposed system was applied to the cell culture of HAV, which title was quantified by Real-Time Quantitative Reverse Transcription PCR (RT¬qPCR). To compare the results, a correlation between the units used in ELIME (IU mL^-1) and those used in RT¬qPCR (genome mL^-1) was established using a HAV-positive sample, resulting in 1 IU mL^-1-10^-4 gen mL^-1 (R² = 0.978). The ELIME tool exhibits good stability and high biological selectivity for HAV antigen detection and was successfully applied for the determination of HAV in tap water.

Nitrogen doped graphene quantum dots based on host guest interaction for selective dual readout of dopamine

Herein, yellow emissive nitrogen doped graphene quantum dots (N@GQDs) were prepared by a novel advanced thermal driven oxidation. The N@GQDs was functionalized with β-cyclodextrin (β-CD) to improve its catalytic performance towards dopamine (DA) detection. The β-CD/N@GQDs exhibited strong fluorescence at λ_em. = 550 nm after excitation at 460 nm with a quantum yield of 38.6%. The β-CD/N@GQDs showed good peroxidase like activity via catalyzing the oxidation of tetramethylbenzidine (TMB) in presence of H₂O₂ to form blue colored product at λ_max = 652 nm. In the colorimetric assay of DA, the detection based on the oxidation of TMB by H₂O₂ in presence of β-CD/N@GQDs as a catalyst. Then, the color of the blue oxidized TMB (oxTMB) product was reduced by addition of DA. While the fluorometric detection of DA based on the "inner filter effect" of the overlapped emission spectrum of β-CD/N@GQDs with the absorption spectrum of oxTMB, where, addition of DA reduces oxTMB to TMB and restores the fluorescence intensity of β-CD/N@GQDs. Under the optimized conditions, the colorimetric method achieved linearity range of 0.12-7.5 µM and LOD (S/N = 3) of 0.04 µM, while the fluorometric method achieved linearity range of 0.028-1.5 µM and LOD (S/N = 3) of 0.009 µM. The peroxidase like activity of β-CD/N@GQDs was used to detect DA in human plasma and serum samples with good % recoveries. The colorimetric and fluorometric methods exhibited good sensitivity and selectivity toward DA detection.

Sulfur quantum dot-based "ON-OFF-ON" fluorescence platform for detection and bioimaging of Cr(vi) and ascorbic acid in complex environmental matrices and biological tissues

Based on an "assembling-fission" principle, stable sulfur quantum dots (SQDs) were synthesized using sublimed sulfur as a precursor and PEG-400 as a passivator. The fluorescence intensities (FIs) of SQDs were efficiently quenched by Cr(vi) due to formation of SQD/Cr(vi) complexes through the inner-filter effect. When ascorbic acid (AA) was introduced into the SQD/Cr(vi) system, SQD fluorescence was restored due to AA-induced reduction of Cr(vi) to Cr(iii). Consequently, a SQD-based "ON-OFF-ON" platform was constructed for sequential detection of Cr(vi) and AA. Under optimized conditions, the FIs of SQDs were linearly dependent on the concentrations of Cr(vi) and AA, yielding linear ranges of 0.005-1.5 and 0.01-5.5 mM with detection limits of 1.5 and 3 μM, respectively, in waters, serum and tablet samples. After a 24 h incubation, the SQDs displayed strong, quenched and recovered blue fluorescence, respectively, in the SQD, SQD/AAO/Cr(vi) and SQD/Cr(vi) systems in live HeLa cells and zebrafish embryos/larvae. A blue fluorescence was displayed in the yolk of zebrafish embryos, and yolk and head of larvae. This study demonstrates the efficacy of SQD systems for environmental and biological applications in complex matrices, and for direct observation of Cr bioaccumulation in organisms by bioimaging.

Design of "Turn On" fluorometric nanoprobe based on nitrogen doped graphene quantum dots modified with β-cyclodextrin and vitamin B6 cofactor for selective sensing of dopamine in human serum

Herein, a novel and rapid fluorometric nanoprobe was constructed for quantitation of dopamine (DA) in presence of biologically interfering compounds. The nanoprobe based on synthesis of yellow emissive nitrogen doped graphene quantum dots (N@GQDs) by advanced thermal driven oxidation. After that, the synthesized N@GQDs was capped with β-cyclodextrin (β-CD), followed by interaction with pyridoxal (PYL) vitamin B₆ cofactor. This interaction resulted in diminishing the yellow fluorescence of β-CD/N@GQDs, and appearance of blue emission peak at 420 nm. Upon addition of DA, the blue emission of β-CD/N@GQDs was increased after excitation at λ = 330 nm. Under optimum conditions, the nanoprobe exhibited a linear range of 0.36-400 nM with limit of detection (LOD) of 0.117 nM. In addition, the fluorescent nanoprobe shows high selectivity and can be used for detection of DA in complicated biological matrices and human serum. This strategy might provide a potential tool for clinical diagnosis and biomedical research for DA related diseases.

Carbon nitride quantum dots tethered on CNTs for the electrochemical detection of dopamine and uric acid

A 0D–1D CNQDs/f-CNT architecture composed of 0D CNQDs tethered on a 1D functionalized multiwalled carbon nanotube (f-CNT) network was used for dopamine sensing.

An electrostatic repulsion strategy for a highly selective and sensitive “switch-on” fluorescence sensor of ascorbic acid based on the cysteamine-coated CdTe quantum dots and cerium(iv)

A highly selective “switch-on” fluorescence approach for sensing of ascorbic acid (AA) based on the system of CA-CdTe QDs-Ce⁴⁺-AA was developed.

"Nano": An Emerging Avenue in Electrochemical Detection of Neurotransmitters

The growing importance of nanomaterials toward the detection of neurotransmitter molecules has been chronicled in this review. Neurotransmitters (NTs) are chemicals that serve as messengers in synaptic transmission and are key players in brain functions. Abnormal levels of NTs are associated with numerous psychotic and neurodegenerative diseases. Therefore, their sensitive and robust detection is of great significance in clinical diagnostics. For more than three decades, electrochemical sensors have made a mark toward clinical detection of NTs. The superiority of these electrochemical sensors lies in their ability to enable sensitive, simple, rapid, and selective determination of analyte molecules while remaining relatively inexpensive. Additionally, these sensors are capable of being integrated in robust, portable, and miniaturized devices to establish point-of-care diagnostic platforms. Nanomaterials have emerged as promising materials with significant implications for electrochemical sensing due to their inherent capability to achieve high surface coverage, superior sensitivity, and rapid response in addition to simple device architecture and miniaturization. Considering the enormous significance of the levels of NTs in biological systems and the advances in sensing ushered in with the integration of nanotechnology in electrochemistry, the analysis of NTs by employing nanomaterials as interface materials in various matrices has emerged as an active area of research. This review explores the advancements made in the field of electrochemical sensors for the sensitive and selective determination of NTs which have been described in the past two decades with a distinctive focus on extremely innovative attributes introduced by nanotechnology.

Antioxidant Graphene Oxide Nanoribbon as a Novel Whitening Agent Inhibits Microphthalmia-Associated Transcription Factor-Related Melanogenesis Mechanism

In the melanin synthesis process, oxidative reactions play an essential role, and it is a good strategy to inhibit melanin production by reducing oxidative stress. Fullerene and its derivatives, or the complexes, were considered as strong free-radical scavengers, and we further applied multilayered sp² nanocarbons to discover melanin synthesis inhibitory mechanisms. In the present study, we used novel nanomaterials, such as multiwalled carbon nanotubes (MWCNTs), short-type MWCNTs, graphene oxide nanoribbons (GONRs), and short-type GONRs, as anti-oxidative agents to regulate melanin production. The results showed that GONRs had better anti-oxidative capabilities in intracellular and extracellular oxidative stress analysis platforms than others. We proposed that GONRs have oxygen-containing functional groups. In the 2',7'-dichlorodihydrofluorescein diacetate assay, we found out GONR could chelate metal ions to scavenge reactive oxygen species. In the molecular insight view, we observed that these nanomaterials downregulated the melanin synthesis by decreasing microphthalmia-associated transcription factor-related gene expressions, and there were similar consequences in protein expressions. To sum up, GONRs is a potential agent as a novel antioxidant and skin-whitening cosmetology material.

A Sensitive Electrochemical Ascorbic Acid Sensor Using Glassy Carbon Electrode Modified by Molybdenite with Electrodeposited Methylene Blue

A non-enzymatic amperometric sensor using natural molybdenite (MLN) electrodeposited with methylene blue (MB) has been fabricated and characterized and its analytical performances were investigated for the determination of ascorbic acid (AA). The surface morphology of the electrode modified by electrodeposited MB was studied by use of the Advanced Mineral Identification and Characterization System (AMICS) and laser confocal high-temperature scanning microscope (LCSM). The poly(MB) and MLN immobilized sensor showed good stability, reproducibility, sensitivity, and selectivity. It exhibited a linear performance range from 3 to 1000 μM, with a lower detection limit of 0.083 μM (signal/noise = 3) and short response time (< 5 s). No obvious decrease in the current was observed after 20 days storage. The methodology reproducibility of this sensor was 2.6%. It showed good anti-interference ability for the potential interfering compounds. The poly(MB) film not only can enhance the electron-transfer rate but also increase the lifetime of the sensor. This study demonstrated the applicability of natural molybdenite for the fabrication of non-enzymatic electrochemical AA sensor.

Palladium supported on polypyrrole/reduced graphene oxide nanoparticles for simultaneous biosensing application of ascorbic acid, dopamine, and uric acid

In this study, we report a facile and effective production process of palladium nanoparticles supported on polypyrrole/reduced graphene oxide (rGO/Pd@PPy NPs). A novel electrochemical sensor was fabricated by incorporation of the prepared NPs onto glassy carbon electrode (GCE) for the simultaneous detection of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The electrodes modified with rGO/Pd@PPy NPs were well decorated on the GCE and exhibited superior catalytic activity and conductivity for the detection of these molecules with higher current and oxidation peak intensities. Simultaneous detection of these molecules was achieved due to the high selectivity and sensitivity of rGO/Pd@PPy NPs. For each biomolecule, well-separated voltammetric peaks were obtained at the modified electrode in cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements. Additionally, the detection of these molecules was performed in blood serum samples with satisfying results. The detection limits and calibration curves for AA, DA, and UA were found to be 4.9 × 10^-8, 5.6 × 10^-8, 4.7 × 10^-8 M (S/N = 3) and ranging from 1 × 10^-3 to 1.5 × 10^-2 M (in 0.1 M PBS, pH 3.0), respectively. Hereby, the fabricated rGO/Pd@PPy NPs can be used with high reproducibility, selectivity, and catalytic activity for the development of electrochemical applications for the simultaneous detection of these biomolecules.

Recent Advances in Electrochemical and Optical Sensing of Dopamine

Nowadays, several neurological disorders and neurocrine tumours are associated with dopamine (DA) concentrations in various biological fluids. Highly accurate and ultrasensitive detection of DA levels in different biological samples in real-time can change and improve the quality of a patient's life in addition to reducing the treatment cost. Therefore, the design and development of diagnostic tool for in vivo and in vitro monitoring of DA is of considerable clinical and pharmacological importance. In recent decades, a large number of techniques have been established for DA detection, including chromatography coupled to mass spectrometry, spectroscopic approaches, and electrochemical (EC) methods. These methods are effective, but most of them still have some drawbacks such as consuming time, effort, and money. Added to that, sometimes they need complex procedures to obtain good sensitivity and suffer from low selectivity due to interference from other biological species such as uric acid (UA) and ascorbic acid (AA). Advanced materials can offer remarkable opportunities to overcome drawbacks in conventional DA sensors. This review aims to explain challenges related to DA detection using different techniques, and to summarize and highlight recent advancements in materials used and approaches applied for several sensor surface modification for the monitoring of DA. Also, it focuses on the analytical features of the EC and optical-based sensing techniques available.

In Situ Growth of Metal-Organic Framework HKUST-1 on Graphene Oxide Nanoribbons with High Electrochemical Sensing Performance in Imatinib Determination

Metal-organic frameworks (MOFs) have been previously investigated as electrode materials for developing electrochemical sensors. They have usually been reported to suffer from poor conductivity and improvement in the conductivity of MOFs is still a great challenge. Here, we reported the fabrication of an electrochemical sensor based on the in situ growth of framework HKUST-1 on conductive graphene oxide nanoribbons (GONRs)-modified glassy carbon electrode (GCE) (HKUST-1/GONRs/GCE). The as-fabricated modified electrode was characterized using field emission scanning electron microscopy, transmission electron microscopy (TEM), high-resolution TEM, Fourier transform infrared, X-ray diffraction, electrochemical impedance spectroscopy, cyclic voltammetry, and Raman spectroscopy. The voltammetric response of HKUST-1/GONRs/GCE toward Imatinib (IMA), as an anticancer drug, is dramatically higher than HKUST-1/GCE because of the synergic effect of the GONRs and HKUST-1 framework. The calibration curve at the HKUST-1/GONRs/GCE for IMA covered two linear dynamic ranges, 0.04-1.0 and 1.0-80 μmol L^-1, with a detection limit of 0.006 μmol L^-1 (6 nmol L^-1). Taking advantage of the conductivity of GONRs and large surface area of HKUST-1, a sensitive modified electrode was developed for the electrochemical determination of IMA. The present method provides an effective strategy to solve the poor conductivity of the MOFs. Finally, the obtained electrochemical performance made this modified electrode promising in the determination of IMA in urine and serum samples.

Tin disulfide nanorod-graphene-β-cyclodextrin nanocomposites for sensing dopamine in rat brains and human blood serum

In the present work describes a facile synthesis of tin disulfide (SnS₂) nanorods decorated graphene-β-cyclodextrin (SnS₂/GR-β-CD) nanocomposite for robust and novel dopamine (DA) electrochemical biosensor applications. The DA biosensor was fabricated using the glassy carbon electrode (GCE) modified with SnS₂/GR-β-CD nanocomposite. The sonochemical and hydrothermal methods have been used for the synthesis of SnS₂/GR-β-CD. Different physicochemical methods were used to confirm the formation of the GR-β-CD, SnS₂, and SnS₂/GR-β-CD nanocomposite. The cyclicvoltammetric cathodic current response of DA was 5 folds higher than those observed at bare, β-CD, SnS₂-β-CD, and GR-β-CD modified GCEs. Under optimised conditions, the biosensor's DPV response current is linear to DA from the concentration of 0.01-150.76 μM. The detection limit of the biosensor was 4 nM. The SnS₂/GR-β-CD biosensor shows an excellent selectivity towards DA in the presence of common interfering species, including ascorbic acid and uric acid. Also, the as-prepared nanocomposite-modified electrode exhibited satisfactory long-term stability, sensitivity (2.49 μAμM^-1 cm^-2) along with reusability for detection of DA. The fabricated SnS₂/GR-β-CD biosensor was successfully used for the detection of DA in the rat brain and human blood serum samples.

Gold nanoclusters-poly(9,9-dioctylfluorenyl-2,7-diyl) dots@zeolitic imidazolate framework-8 (ZIF-8) nanohybrid based probe for ratiometric analysis of dopamine

Ratiometric analysis of dopamine (DA) in complex biological system is urgently desired. In this work, a novel dual-emission fluorescence probe was fabricated by embedding both gold nanoclusters (AuNCs) and poly(9,9-dioctylfluorenyl-2,7-diyl) (PFO) dots into zeolitic imidazolate framework-8 (ZIF-8) (abbreviated as ZIF-8@AuNCs-PFO) and applied to ratiometric analysis of DA. Remarkably, encapsulating AuNCs and PFO dots into ZIF-8 not only achieved an excellent aggregation induced emission (AIE) enhancement effect on AuNCs (5 times increase), but also brought about an unique DA-triggered asynchronous fluorescence changes of AuNCs and PFO dots. The as-prepared probe exhibited excellent performance toward DA in the concentrations range from 0.01 to 10000 μmol L^-1 and good selectivity over interfering substances. The detection limit of DA was as low as 4.8 nmol L^-1. Furthermore, good stability and practicability of the probe in human serum samples suggesting its great potential for diagnostic purposes. Moreover, the quenching mechanism of AuNCs was intensively studied and summarized as three synergistic processes: (i) electron transfer between AuNCs and DA; (ii) DA-triggered architecture change of ZIF-8; (iii) fluorescence resonance energy transfer (FRET) between AuNCs and polydopamine (PDA), which offered an important theory for ZIF-based fluorescent probes.

Green and facile microwave solvent-free synthesis of CeO2 nanoparticle-decorated CNTs as a quadruplet electrochemical platform for ultrasensitive and simultaneous detection of ascorbic acid, dopamine, uric acid and acetaminophen

This study designed a simplistic, efficient, and greener procedure to synthesize CeO₂-CNTs. The analysis of structural and morphological characteristics of nano-composites has been done with regard to different procedures (e.g., EDX, XRD, & FESEM). In addition, simultaneous detection of ascorbic acid (AA), dopamine (DA), uric acid (UA) and acetaminophen (AC) has been examined at the modified glassy carbon electrode with CeO₂-CNTs nano-composites. The surface area and electron transfer speed of the interplay between neuro-transmitters and electrode may be efficiently enhanced due to the existence of CeO₂ nano-particles on CNTs surfaces. Moreover, electro-chemical behavior of electrodes has been dealt with by differential pulse voltammetry (DPV), impedance analysis (EIS), and cyclic voltammetry (CV). Acceptable linear response of AA, DA, UA and AC respectively have been ranged 0.01-900.0 μM, 0.01-700.0 μM, 0.01-900.0 μM, and 0.01-900.0 μM with determination limits (S/N = 3) of 3.1 nM, 2.6 nM, 2.4 nM and 4.4 nM. Ultimately, this procedure was used with successful results for determining AA, DA, UA and AC in real specimens, which suggested probable uses in other sensing studies.

A Glassy Carbon Electrode Modified with Molybdenite and Ag Nanoparticle Composite for Selectively Sensing of Ascorbic Acid

Molybdenite (MLN) was physically co-adsorbed with Ag nanoparticles (Ag) on a glassy carbon electrode (GCE) for selectively sensing of ascorbic acid (AA). The composite was characterized with a scan electron microscope, a high-temperature confocal laser scanning microscope, an X-ray diffractometer, an X-ray fluorescence analyzer and electrochemical methods. The prepared MLN/Ag-GCE sensor exhibited good properties including a linear range from 3.0 × 10^-5 to 1.0 × 10^-3 M toward AA, a low detection limit of 1.5 × 10^-5 M, good selectivity, excellent reproducibility, and good stability. The synergistic effect between MLN and Ag nanoparticles results in an enhancement of the electrocatalytic activity for molybdenite.

Determination of uric acid in serum using an optical sensor based on binuclear Pd(II) 2-pyrazinecarboxamide-bipyridine doped in a sol gel matrix

A new highly green luminescent binuclear palladium 2-pyrazinecarboxamide-bipyridine complex [Pd(pyc)(bpy)] was prepared and characterized. The binuclear Pd(pyc)(bpy) complex doped in sol-gel matrix has a strong luminescence intensity at 547 nm with λ_ex = 330 nm in water The method depends on the quenching of the luminescence intensity of the binuclear Pd(pyc)(bpy) complex at 547 nm by different concentrations of uric acid. The remarkable quenching of the luminescence intensity of the binuclear Pd(pyc)(bpy) complex, doped in a sol-gel matrix, by uric acid was successfully used for the determination of uric acid in serum samples of patients with hypouricemia disease. The calibration plot was achieved over the concentration 3.9 × 10^-9 to 1.2 × 10^-4 mol L^-1uric acid with a correlation coefficient of 0.9 and a detection limit of 1.8 × 10^-10 mol L^-1. The method was used satisfactorily for the assessment of the uric acid in a number of serum samples collected from various patients with Hypouricemia disease.