Highly efficient plasmon-enhanced dye-sensitized solar cells through metal@oxide core-shell nanostructure

Surface Plasmonic Core-Shell Nanostructures in Surface Enhanced Raman Scattering and Photocatalysis

Core-shell nanostructures are a typical material design. Usually, it consists of a core wrapped in a shell. It has attracted much attention due to its tunable structure and composition, high surface area, and high programmability. The properties and resonance frequency of their surface plasmons can be adjusted by regulating the shape, size, and composition of metal core-shell nanostructures. This interaction makes core-shell nanostructures an excellent platform for plasmon-enhanced optical effects. This Perspective explores the categories of core-shell nanostructures, their exchanges with excitons in two-dimensional materials, their spectrum-enhanced aspects, and prospects for future applications of core-shell nanostructures.

Superior Visible Photoelectric Response with Au/Cu2NiSnS4 Core-Shell Nanocrystals

The incorporation of plasmonic metal nanostructures into semiconducting chalcogenides in the form of core-shell structures provides a promising approach to enhancing the performance of photodetectors. In this study, we combined Au nanoparticles with newly developed copper-based chalcogenides Cu2NiSnS4 (Au/CNTS) to achieve an ultrahigh optoelectronic response in the visible regime. The high-quality Au/CNTS core-shell nanocrystals (NCs) were synthesized by developing a unique colloidal hot-injection method, which allowed for excellent control over sizes, shapes, and elemental compositions. The as-synthesized Au/CNTS hybrid core-shell NCs exhibited enhanced optical absorption, carrier extraction efficiency, and improved photosensing performance owing to the plasmonic-induced resonance energy transfer effect of the Au core. This effect led to a significant increase in the carrier density of the Au/CNTS NCs, resulting in a measured responsivity of 1.2 × 103 AW-1, a specific detectivity of 6.2 × 1011 Jones, and an external quantum efficiency of 3.8 × 105 % at an incident power density of 318.5 μW cm-2. These results enlighten a new era in the development of plasmonic core-shell nanostructure-based visible photodetectors.

Efficient Inhibition of Aspergillus flavus to Reduce Aflatoxin Contamination on Peanuts over Ag-Loaded Titanium Dioxide

Peanuts are susceptible to aflatoxins produced by Aspergillus flavus. Exploring green, efficient, and economical ways to inhibit Aspergillus flavus is conducive to controlling aflatoxin contamination from the source. In this study, Ag-loaded titanium dioxide composites showed more than 90% inhibition rate against Aspergillus flavus under visible light irradiation for 15 min. More importantly, this method could also reduce the contaminated level of Aspergillus flavus to prevent aflatoxins production in peanuts, and the concentrations of aflatoxin B1, B2, and G2 were decreased by 96.02 ± 0.19%, 92.50 ± 0.45%, and 89.81 ± 0.52%, respectively. It was found that there are no obvious effects on peanut quality by evaluating the changes in acid value, peroxide value, and the content of fat, protein, polyphenols, and resveratrol after inhibition treatment. The inhibition mechanism was that these reactive species (•O2−, •OH−, h+, and e−) generated from photoreaction destroyed cell structures, then led to the reduced viability of Aspergillus flavus spores. This study provides useful information for constructing a green and efficient inhibition method for Aspergillus flavus on peanuts to control aflatoxin contamination, which is potentially applied in the field of food and agri-food preservation.

Review on Metal-Based Theranostic Nanoparticles for Cancer Therapy and Imaging

Theranostic agents are promising due to their ability to diagnose, treat and monitor different types of cancer using a variety of imaging modalities. The advantage specifically of nanoparticles is that they can accumulate easily at the tumor site due to the large gaps in blood vessels near tumors. Such high concentration of theranostic agents at the target site can lead to enhancement in both imaging and therapy. This article provides an overview of nanoparticles that have been used for cancer theranostics, and the different imaging, treatment options and signaling pathways that are important when using nanoparticles for cancer theranostics. In particular, nanoparticles made of metal elements are emphasized due to their wide applications in cancer theranostics. One important aspect discussed is the ability to combine different types of metals in one nanoplatform for use as multimodal imaging and therapeutic agents for cancer.

Ti(IV)-MOF with Specific Facet-Ag Nanoparticle Composites for Enhancing the Photocatalytic Activity and Selectivity of CO2 Reduction

Metal nanoparticles deposited in the photocatalyst not only can serve as a cocatalyst but also can act as a light harvester to extend the light absorption, resulting from the surface plasmon resonance (SPR). In this study, we deposited silver nanoparticles (Ag NPs) onto NH₂-MIL-125(Ti) with exposed specific facets and achieved effectively improved activity and selectivity for photocatalytic CO₂ reduction. Loading Ag NPs on the exposed {111} facets of NH₂-MIL-125(Ti) generates a highly effective composite catalyst for the photoreduction of CO₂, resulting in the maximal CO and CH₄ yields of 26.7 and 63.3 μmol g^-1 h^-1, respectively, which are 2.2- and 16.2-fold those of the NH₂-MIL-125(Ti) exposing {111} facets, and a CH₄ selectivity of 90.5%. Incorporation of Ag NPs not only optimizes the electronic structure of the photocatalyst but also suppresses the recombination of photogenerated electron-hole pairs. This study provides an exciting example for creating and understanding metal-decorated facet-dependent effects on metal-organic frameworks (MOFs) for photocatalytic reactions.

Surface Plasmon Resonance and Increased Interfacial Electron Transfer of 3D AgNWS@TiO2NS Structure for Enhanced Photocatalytic and DSSC Properties

Ag nanowires coated with TiO2 nanosheets (AgNWS@TiO2NS, AWT) have been successfully synthesized via a one-pot hydrothermal synthesis. Importantly, the prepared AWT shows enhanced photocatalytic activity compared with Degussa P25, which is attributed to its continuous hierarchical structures, special conductive channel and localized surface plasmon resonance (SPR). Additionally, these prepared AWT were exploited as an electron conductor and scattering material in the TiO2 composite photoanodes of dye-sensitized solar cells (DSSCs). The highest energy conversion efficiency of 6.98% was achieved when the AWT doping rate in the photoanode slurry was 5 wt%. Both enhanced Isc and Voc are attributed to the increased photo-absorption efficiency from the localized SPR. The potential enhanced light-scattering effect and faster photoelectric transmission efficiency of the AWT in the photoanode.

Self-Assembly of Nanocrystals into Ring-like Superstructures: When Shape, Size, and Material Do Not Matter

This manuscript describes a universal method for the spontaneous self-assembly of nanostructures ranging from 2-4 nm spherical particles to ∼440 nm long anisotropic nanorods into ring-like superstructures. The nanostructures composed of Au, Pt, and Pd as surface materials were synthesized in an aqueous cetyltrimethyl ammonium bromide (CTAB) solution. The ligand exchange technique with 4-mercaptophenol was applied to replace CTAB from the surface of nanostructures with a functional thiol. The esterification reaction was carried out to covalently attach carboxy-terminated long-chain polystyrene (PS) molecules to the surface of nanostructures. The high grafting density of PS chains around nanocrystals made them highly soluble in a wide range of organic solvents. When a drop of nanostructure solution in a volatile nonpolar solvent was dried on a solid surface, the nanostructures spontaneously arranged themselves in the form of ring-like assemblies. The condensation of microscopic water droplets from the atmosphere on the surface of an evaporating solvent creates templates for the self-assembly of nanostructures into rings. We demonstrate that this self-assembly method is highly universal and can be extended to various nanostructures regardless of their shapes, sizes, and surface materials.

Plasmonic dye-sensitized solar cells through collapsible gold nanofingers

Plasmonic nanostructures are successfully demonstrated in solar cells due to their broad spectra-selective resonance in the range of ultraviolet to near-infrared, and thus light absorption can be mostly improved and power conversion efficiency (PCE) further. Here, we demonstrate plasmonic dye-sensitized solar cells (DSSCs) using collapsible Au nanofingers to build photoanode to enhance light absorption. In this plasmonic DSSCs, by balancing local field enhancement due to gap-plasmon resonance and dye fluorescence quenching, the optimal gap size in collapsed Au/Al₂O₃/Au nanofingers is designed by twice the Al₂O₃thickness and then deposited a TiO₂layer as photoanode. The results show that the PCE of DSSCs is mostly improved as compared to DSSCs with photoanode of Au/Al₂O₃/TiO₂films, which can be ascribed to the coupled local field enhancement within the sub-nanometer gaps. In addition, fluorescence of dyes on plasmonic nanofingers is nearly 10 times higher than plain Au/Al₂O₃/TiO₂films, which further proves the dye absorption enhancement. These plasmonic nanofingers enable the precise engineering of gap-plasmon modes and can be scaled up to wafer scale with low cost by the nanoimprint lithography technique, which suggests the feasibility of applying our result in constructing the photoanode for other types of solar cells.

Photoredox Organic Synthesis Employing Heterogeneous Photocatalysts with Emphasis on Halide Perovskite

Lately, heterogeneous semiconductor materials have been explored as an emerging type of efficient photocatalyst for photoredox organic synthesis. Among these semiconductors, lead halide perovskite materials demonstrate unique properties towards excellent charge separation and charge transfer, extremely long charge carrier migration, high efficiency in visible light absorption, and long excited states lifetimes, etc., as proved in ground-breaking solar cell applications, garnering necessary merits for an efficient catalytic system for photoredox organic reactions. Here, the latest progress in heterogeneous semiconductor materials towards this endeavor is examined, with particular emphasis on lead halide perovskite nanocrystals (NCs) in photocatalytic organic synthesis.

Efficiency Improvement of MAPbI3 Perovskite Solar Cells Based on a CsPbBr3 Quantum Dot/Au Nanoparticle Composite Plasmonic Light-Harvesting Layer

We demonstrate a method to enhance the power conversion efficiency (PCE) of MAPbI3 perovskite solar cells through localized surface plasmon (LSP) coupling with gold nanoparticles:CsPbBr3 hybrid perovskite quantum dots (AuNPs:QD-CsPbBr3). The plasmonic AuNPs:QD-CsPbBr3 possess the features of high light-harvesting capacity and fast charge transfer through the LSP resonance effect, thus improving the short-circuit current density and the fill factor. Compared to the original device without Au NPs, a 27.8% enhancement in PCE of plasmonic AuNPs:QD-CsPbBr3/MAPbI3 perovskite solar cells was achieved upon 120 μL Au NP solution doping. This improvement can be attributed to the formation of surface plasmon resonance and light scattering effects in Au NPs embedded in QD-CsPbBr3, resulting in improved light absorption due to plasmonic nanoparticles.

Core/Shell Nanocrystal Tailored Carrier Dynamics in Hysteresisless Perovskite Solar Cells with ∼20% Efficiency and Long Operational Stability

The ambient stability, hysteresis, and trap states in organo-halide perovskite solar cells (PSCs) are correlated to the influence of interlayer interfaces and grain boundaries. Astute incorporation of Cu₂ZnSnS₄ (CZTS) and Au/CZTS core/shell nanocrystals (NCs) can realize the goal of simultaneously achieving better performance and ambient stability of the PSCs. With optimized Au/CZTS NC size and concentration in the photoactive layer, power conversion efficiency can be increased up to 19.97 ± 0.6% with ambient air stability >800 h, as compared to 14.46 ± 1.02% for the unmodified devices. Through efficient carrier generation by CZTS and perovskite, accompanied by the plasmonic effect of Au, carrier density is sufficiently increased as validated by transient absorption spectroscopy. NCs facilitate the interfacial charge transfer by suitable band alignment and removal of recombination centers such as metallic Pb⁰, surface defects, or impurity sites. NC embedding also increases the perovskite grain size and assists in pinhole filling, reducing the trap state density.

Photovoltaic Counter Electrodes: An Alternative Approach to Extend Light Absorption Spectra and Enhance Performance of Dye-Sensitized Solar Cells

If counter electrodes (CEs) could also contribute to light harvesting in dye-sensitized solar cells (DSSCs), then the power conversion efficiency (PCE) of DSSCs would be further boosted without changing the device structure. Nearly monodispersed Ag₂ Se nanocrystals with a bandgap of 1.62 eV (∼765 nm) were synthesized via a one-pot process, and Ag₂ Se CEs were fabricated by using a spin-coating and annealing process. Incident photon-to-current conversion efficiency and photocurrent spectra indicated that Ag₂ Se CEs can generate the electricity by harvesting more visible light, which could not be absorbed by dye-sensitized photoanodes. Thus, compared to Pt CE (7.57 %), the DSSC based on Ag₂ Se CE exerted a higher PCE of 8.06 %. The development of photovoltaic CEs may offer an alternative way to promote the performance and competitiveness of DSSCs.

Broadband Plasmonic Enhancement of High-Efficiency Dye-Sensitized Solar Cells by Incorporating Au@Ag@SiO2 Core-Shell Nanocuboids

The introduction of plasmonic additives is a promising approach to boost the efficiency of the dye-sensitized solar cell (DSSC) since they may improve the light harvesting of a solar cell. Herein, we design broadband and strong plasmonic absorption Au@Ag@SiO₂ nanocuboids (GSS NCs) as nanophotonic inclusions to achieve plasmon-enhanced DSSCs. These multiple-resonance absorptions arising from GSS NCs can be readily adjusted by altering their structures to complementarily match the absorption spectra of the dyes, especially in weak absorption zones. By subtly regulating the position of nanophotonic inclusions in the photoanodes, not only the plasmonic near-field enhancement but also far-field light scattering could be adequately developed to promote the light harvest and thus the efficiency of DSSCs. The resulting solar cells yield an average efficiency of 10.34%, with a champion value of 10.58%. The electromagnetic simulations are consistent with the experimental observations, further corroborating the synergistic effect of plasmonic improvement in these DSSCs.

Au-Embedded and Carbon-Doped Freestanding TiO2 Nanotube Arrays in Dye-Sensitized Solar Cells for Better Energy Conversion Efficiency

Dye-sensitized solar cells (DSSCs) are fabricated with freestanding TiO₂ nanotube arrays (TNTAs) which are incorporated with Au nanoparticles (NPs) and carbon materials via electrodeposition and chemical vapor deposition (CVD) method to create a plasmonic effect and better electron transport that will enhance their energy conversion efficiency (ECE). The ECE of DSSCs based on the freestanding TNTAs is 5.87%. The ECE of DSSCs, based on the freestanding TNTAs with Au NPs or carbon materials, is 6.57% or 6.59%, respectively, and the final results of DSSCs according to the freestanding TNTAs with Au NPs and carbon materials is increased from 5.87% to 7.24%, which is an enhancement of 23.34% owing to plasmonic effect and better electron transport. Au NPs are incorporated into the channel of freestanding TNTAs and are characterized by CS-corrected-field emission transmission electron microscope (Cs-FE-TEM) and elemental mapping. Carbon materials are also well-incorporated in the channel of freestanding TNTAs and are analyzed by Raman spectroscopy.

Synergic effect of graphene and core-shells structured Au NR@SiO2@TiO2 in dye-sensitized solar cells

Graphene and Au nanorods (AuNRs) coated with SiO₂@TiO₂ double shells (AuNR@SiO₂@TiO₂) were incorporated to form novel composite photoanodes in dye sensitized solar cells (DSSCs). The performances of the photoanodes and DSSCs are studied systematically. The short circuit current density (J _sc) and power conversion efficiency (PCE) of these composited DSSCs were greatly enhanced and the influences of the graphene, AuNRs and the SiO₂@TiO₂ double shells were revealed. The optimal properties with the maximal J _sc of 16.26 mA cm^-2 and PCE of 8.08% are obtained in the DSSC co-doped with graphene and AuNR@SiO₂@TiO₂, significantly higher than those of the conventional DSSC with pure TiO₂ photoanode by 37.7% and 32.9%, respectively. These significant enhancements in J _sc and PCE are attributed to the synergistic effect of graphene, the local surface plasma resonance of AuNRs, as well as the outer SiO₂@TiO₂ double shells, which result in the increased specific surface area and dye adsorption, the increased light absorption, the decreased charge transfer resistance R ₂ and electron recombination and thus the increased J _sc and PCE of the DSSCs.

Collaborative effect of plasmon-induced resonance energy and electron transfer on the interfacial electron injection dynamics of dye-sensitized solar cell

It has been widely recognized that plasmonic metal nanoparticles (MNPs) can enhance the power convention efficiency (PCE) of dye-sensitized solar cells (DSSCs). This enhancement is ascribed to the combined effects of plasmon decay, scattering, near-field enhancement, and exciting charge carriers in semiconductors through plasmon-induced resonance energy transfer (PIRET) and hot electron injection (HEI). PIRET and HEI processes appeared between MNPs, and semiconductors have been intensively investigated; however, it is not clear how the collaborative effect of PIRET and photon-induced direct and indirect electron transfer (PICT) occurred between plasmonic metals and dyes, and the interference of different charge separation channels (CSCs) starting from PIRET and PICT affects the PCE of DSSCs. This work aims to address these issues. We apply a model Hamiltonian method, which obviously includes both PIRET and PICT processes from Au MNP to dye molecules and incorporates the dye's electron-phonon interaction, to investigate the carrier dynamics. It is found that PIRET deforms the wavepacket dynamics of the molecular excited state and results in ten-fold enhancement of dye absorption. MNPs augment light absorption and increase the electron density in empty molecular orbitals of the dye molecule. Consequently, this enhances the interfacial charge separation. Furthermore, we observed the interference behavior of two CSCs and gave a full-scale insight into the correlation between the constructive/destructive interference and the electronic-state properties as well as carrier-phonon interactions. This work provides a theoretical guidance to optimize DSSCs.

Plasmonic Metal Nanoparticles with Core-Bishell Structure for High-Performance Organic and Perovskite Solar Cells

To maximize light coupling into the active layer, plasmonic nanostructures have been incorporated into both active layers of organic solar cells (OSCs) and perovskite solar cells (PSCs) with the aim of increasing light absorption, but reports have shown controversial results in electrical characteristics. In this work, we introduce a core-bishell concept to build plasmonic nanoparticles (NPs) with metal-inorganic semiconductor-organic semiconductor nanostructure. Specifically, Ag NPs were decorated with a titania/benzoic-acid-fullerene bishell (Ag@TiO₂@Pa), which enables the NPs to be compatible with fullerene acceptors or a perovskite absorber. Moreover, coating the Ag@TiO₂ NP with a fullerene shell can activate efficient plasmon-exciton coupling and eliminate the charge accumulation, thus facilitating exciton dissociation and reducing the monomolecular recombination. The improved light absorption and enhanced carrier extraction of devices with Ag@TiO₂@Pa nanoparticles are responsible for the improved short-circuit current and fill factor, respectively. On the basis of the synergistic effects (optical and electrical), a series of plasmonic OSCs exhibited enhancement of 12.3-20.7% with a maximum power conversion efficiency of 13.0%, while the performance of plasmonic PSCs also showed an enhancement by 10.2% from 18.4% to 20.2%. This core-bishell design concept of plasmonic nanostructures demonstrates a general approach to improving the photovoltaic performance with both optical and electrical contributions.

Core-shell nanomaterials: Applications in energy storage and conversion

Materials with core-shell structures have attracted increasing attention in recent years due to their unique properties and wide applications in energy storage and conversion systems. Through reasonable adjustments of their shells and cores, various types of core-shell structured materials can be fabricated with favorable properties that play significant roles in energy storage and conversion processes. The core-shell material can provide an effective solution to the current energy crisis. Various synthetic strategies used to fabricate core-shell materials, including the atomic layer deposition, chemical vapor deposition and solvothermal method, are briefly mentioned here. A state-of-the -art review of their applications in energy storage and conversion is summarized. The involved energy storage includes supercapacitors, li-ions batteries and hydrogen storage, and the corresponding energy conversion technologies contain quantum dot solar cells, dye-sensitized solar cells, silicon/organic solar cells and fuel cells. In addition, the correlation between the core-shell structures and their performance in energy storage and conversion is introduced, and this finding can provide guidance in designing original core-shell structures with advanced properties.

Core-shell structured titanium dioxide nanomaterials for solar energy utilization

Because of its unmatched resource potential, solar energy utilization currently is one of the hottest research areas. Much effort has been devoted to developing advanced materials for converting solar energy into electricity, solar fuels, active chemicals, or heat. Among them, TiO2 nanomaterials have attracted much attention due to their unique properties such as low cost, nontoxicity, good stability and excellent optical and electrical properties. Great progress has been made, but research opportunities are still present for creating new nanostructured TiO2 materials. Core-shell structured nanomaterials are of great interest as they provide a platform to integrate multiple components into a functional system, showing improved or new physical and chemical properties, which are unavailable from the isolated components. Consequently, significant effort is underway to design, fabricate and evaluate core-shell structured TiO2 nanomaterials for solar energy utilization to overcome the remaining challenges, for example, insufficient light absorption and low quantum efficiency. This review strives to provide a comprehensive overview of major advances in the synthesis of core-shell structured TiO2 nanomaterials for solar energy utilization. This review starts from the general protocols to construct core-shell structured TiO2 nanomaterials, and then discusses their applications in photocatalysis, water splitting, photocatalytic CO2 reduction, solar cells and photothermal conversion. Finally, we conclude with an outlook section to offer some insights on the future directions and prospects of core-shell structured TiO2 nanomaterials and solar energy conversion.

Unified theory of plasmon-induced resonance energy transfer and hot electron injection processes for enhanced photocurrent efficiency

Plasmons in metal nanoparticles (MNPs) promise to enhance solar energy conversion in semiconductors. Two essential mechanisms of enhancement in the near-field regime are hot electron injection (HEI) and plasmon-induced resonance energy transfer (PIRET). Individual studies of both mechanisms indicate that the PIRET efficiency is limited by the short lifetime of the plasmon, whereas the hot electrons result from the plasmon decay. The development of a unified theory of the coupled HEI and PIRET processes is fundamentally interesting and necessary for making reliable predictions but is complicated by the multiple interactions between various components that participate in the enhancement process. In this paper, we use the model-Hamiltonian approach to develop a combined theoretical framework including both PIRET and HEI. The coupled dynamics as well as the time evolution of hot electron energy distribution are studied. The theory further predicts an interference-induced asymmetry in the spectral dependence of PIRET, which can be used to distinguish it from HEI. As the relative contributions of PIRET and HEI strongly depend on the size of the MNPs, this presents itself as a simple route to control the strength of their contributions. The results presented here can further guide future applications of plasmonic solar energy harvesting.

Photocharging and Band Gap Narrowing Effects on the Performance of Plasmonic Photoelectrodes in Dye-Sensitized Solar Cells

The incorporation of plasmonic nanostructures in active electrodes has become one of the most attractive ways to enhance the photoconversion efficiency (PCE) of dye-sensitized solar cells (DSSCs). Although an enhancement of PCE because of the incorporation of plasmonic nanostructures of different sizes, either bare or coated, has been demonstrated, the fundamental mechanisms associated to such enhancement are still unclear. Besides, the photocurrent enhancement of plasmonic DSSCs is frequently associated to the strong surface plasmon resonance (SPR) absorption of metal nanoparticles. In this work, through oxygen K-edge soft X-ray absorption and emission spectroscopies of plasmonic electrodes and electrodynamical characterization of the fabricated cells, we demonstrate a band gap narrowing and photocharging effect on the plasmonic electrodes that definitely contribute to the PCE enhancement in plasmonic DSSCs. The incorporation of bare metal nanoparticles in active metal-oxide semiconductor electrodes such as TiO₂ in optimum concentration causes an upward shift of its valence band edge, reducing its effective band gap energy and enhancing the short-circuit current of DSSCs. On the other hand, small perturbation-based stepped light-induced transient measurements of photovoltage and photocurrent of the operating DSSCs revealed an upward shift of quasi-Fermi level of photoelectrodes because of the photocharging effect induced by the incorporated metal nanoparticles. The upward shift of the quasi-Fermi level causes an increase in open-circuit voltage ( V_OC), nullifying the effect of band gap reduction. The short-circuit photocurrent enhancement was controlled by the band gap narrowing, screening the SPR contribution. The results presented in this work not only clarify the contribution of SPR absorption in plasmonic DSSCs, but also highlight the importance of considering the corrections in the effective base voltage because of the quasi-Fermi level band shift during the estimation of the transport and recombination parameters of an assembled DSSC.

Intracellular ROS Induction by Ag@ZnO Core-Shell Nanoparticles: Frontiers of Permanent Optically Active Holes in Breast Cancer Theranostic

In this study, we investigated whether ZnO coating on Ag nanoparticles (NPs) tunes electron flux and hole figuration at the metal-semiconductor interface under UV radiation. This effect triggers the photoactivity and generation of reactive oxygen species from Ag@ZnO NPs, which results in enhanced cytotoxic effects and apoptotic cell death in human breast cancer cells (MDA-MB231). In this context, upregulation of apoptotic cascade proteins (i.e., Bax/Bcl2 association, p53, cytochrome c, and caspase-3) along with activation of oxidative stress proteins suggested the occurrence of apoptosis by Ag@ZnO NPs in cancer cells through the mitochondrial pathway. Also, preincubation of breast cancer cells with Ag@ZnO NPs in dark conditions muted NP-related toxic effects and consequent apoptotic fate, highlighting biocompatible properties of unexcited Ag@ZnO NPs. Furthermore, the diagnostic efficacy of Ag@ZnO NPs as computed tomography (CT)/optical nanoprobes was investigated. Results confirmed the efficacy of the photoactivated system in obtaining desirable outcomes from CT/optical imaging, which represents novel theranostic NPs for simultaneous imaging and treatment of cancer.

Influence of Ag Nanoparticles with Different Sizes and Concentrations Embedded in a TiO2 Compact Layer on the Conversion Efficiency of Perovskite Solar Cells

In this study, Ag nanoparticles with diverse particle size and concentration, fabricated via the polyol method, were embedded in a TiO2 compact film to improve the power conversion efficiency of perovskite solar cells. Obtained results showed that Ag nanoparticles embedded in the TiO2 compact film do not affect the crystal structure of TiO2, while the size of the Ag nanoparticles can strongly influence the light absorption capacity of perovskite materials. However, the absorption intensity and power conversion efficiency of perovskite cells decreased with the increase in size of Ag nanoparticles. The amount of Ag nanoparticles was also an important factor for the performance of perovskite solar cells, and Ag nanoparticles in the compact layer were optimized to measure 10 nm in diameter, being embedded at a molar ratio of 1.5% (Ag:Ti = 1.5 mol%). Compared with hole-conductor-free perovskite solar cells that use carbon as counter electrodes, without Ag nanoparticles incorporated in the compact film, the enhanced efficiency of cells developed in this study can be mainly ascribed to the accelerated charge transfer, decreased charge recombination, and enhanced light absorption of the perovskite material in the visible region.

Plasmonic Effects of Silver Nanoparticles Embedded in the Counter Electrode on the Enhanced Performance of Dye-Sensitized Solar Cells

The plasmonic effects of silver (Ag) nanoparticles (NPs) with various morphologies (sphere, rod, and prism) embedded into the platinum (Pt) counter electrodes (CEs) of dye-sensitized solar cells (DSCs) were systematically investigated. It was shown that the power conversion efficiencies (PCEs) of the incorporated devices are notably improved from 7.60%, for the reference device without Ag NPs, to 8.10, 8.68, and 8.55% with Ag nanospheres, nanorods, and nanoprism devices, respectively. Moreover, the photocurrent and fill factor enhancement is attributed to the better optical and electrical properties of the integrated devices. Among all of the NP morphologies studied, Ag nanorods offer the best improvement to the device efficiency, as they have longitudinal localized surface plasmon resonance (L-LSPR) and strong scattering effects correlate within the morphology.

Heterostructured TiO2/NiTiO3 Nanorod Arrays for Inorganic Sensitized Solar Cells with Significantly Enhanced Photovoltaic Performance and Stability

Organic dyes used in the conventional dye-sensitized solar cells (DSSCs) suffer from poor light stability and high cost. In this work, we demonstrate a new inorganic sensitized solar cell based on ordered one-dimensional semiconductor nanorod arrays of TiO₂/NiTiO₃ (NTO) heterostructures prepared via a facile two-step hydrothermal approach. The semiconductor heterostructure arrays are highly desirable and promising for DSSCs because of their direct charge transport capability and slow charge recombination rate. The low-cost NTO inorganic semiconductor possesses an appropriate band gap that matches well with TiO₂, which behaves like a "dye" to enable efficient light harvesting and fast electron-hole separation. The solar cells constructed by the ordered TiO₂/NTO heterostructure photoanodes show a significantly improved power conversion efficiency, high fill factor, and more promising, outstanding life stability. The present work will open up an avenue to design heterostructured inorganics for high-performance solar cells.

Plasmon-Enhanced Photocurrent from Photosystem I Assembled on Ag Nanopyramids

Plasmonic metal nanostructures have been known to tune optoelectronic properties of fluorophores. Here, we report the first-ever experimental observation of plasmon-induced photocurrent enhancements from Photosystem I (PSI) immobilized on Fischer patterns of silver nanopyramids (Ag-NP). To this end, the plasmonic peaks of Ag-NP were tuned to match the PSI absorption peaks at ∼450 and ∼680 nm wavelengths. Specifically, the plasmon-enhanced photocurrents indicate enhancement factors of ∼6.5 and ∼5.8 as compared to PSI assembly on planar Ag substrates for nominal excitation wavelengths of 660 and 470 nm, respectively. The comparable enhancement factors from both 470 and 660 nm excitations, in spite of a significantly weaker plasmon absorption peak at ∼450 nm for the Ag-NP structures, can be rationalized by previously reported excessive plasmon-induced fluorescence emission losses from PSI in the red region as compared to the blue region of the excitation wavelengths.

Enhancement of Y123 dye-sensitized solar cell performance using plasmonic gold nanorods

The role of the surface plasmon resonance (SPR) of gold nanorods (Au NRs) on the performance of Y123 dye-sensitized solar cells (DSSCs) was investigated.

Systematic characterization of the effect of Ag@TiO2 nanoparticles on the performance of plasmonic dye-sensitized solar cells

The use of plasmonic nanoparticles (NPs) in dye-sensitized solar cells (DSSCs) in an effort to enhance their power conversion efficiencies (PCEs) increases light absorbance of the cells but also affect their electron dynamics. This has contributed to the failure of plasmonic NPs to make the expected high impact of PCE enhancement. Herein, we investigated the wide range effects of plasmonic NPs on the performance of DSSCs, using extended characterization and a systematic approach. We prepared DSSCs using Ag@TiO₂ NPs-doped TiO₂ photoanodes. Using a wide range doping concentration, we obtained panchromatic enhancement effect with two optimal doping concentrations (0.1 and 1 wt. %).They enhanced PCE via mainly: a) optimal band alignment for efficient charge injection; and b) a balance of the negative and positive effects of plasmonic NPs on cell performance parameters (open circuit voltage, fill factor, charge transfer resistance against recombination, electron life time and charge collection efficiency); respectively. The PCE of the pristine sample increased from 4.66 to 4.88 and 5.00% via these 2 routes, respectively. The major cause of not obtaining very high PCE was charge recombination from high charge density. Thus, these observations might serve as invaluable guidance for the preparation of highly efficient plasmonic DSSCs.

An enhanced degree of charge transfer in dye-sensitized solar cells with a ZnO-TiO2/N3/Ag structure as revealed by surface-enhanced Raman scattering

A number of recent studies have focused on improving the performance of dye-sensitized solar cells (DSSCs). Cells with a ZnO-TiO₂/N3/Ag structure have attracted particular attention because of their excellent power conversion efficiencies. Using a dendritic crystal ZnO-TiO₂ composite semiconductor and Ag in conjunction leads to different charge-transfer (CT) processes, and this is the main theoretical basis for the improvement of DSSC performances. Thus, in the present study, TiO₂/N3, ZnO/N3, ZnO-TiO₂/N3, TiO₂/N3/Ag, ZnO/N3/Ag, and ZnO-TiO₂/N3/Ag assemblies have been fabricated and their CT processes have been monitored by using surface-enhanced Raman scattering (SERS) spectra, with particular focus on the differences caused by the synergistic effect of the ZnO-TiO₂ component. The dye loading capacity of the dendritic crystal ZnO-TiO₂ is much larger than that of TiO₂. There are extra enhancements in the SERS intensity and degree of CT (ρ_CT) in ZnO-TiO₂/N3 compared to ZnO + TiO₂/N3 (based on a simulation curve for the physically mixed TiO₂ and ZnO semiconductors) with 476.5 nm excitation due to the synergistic effect of the ZnO-TiO₂ component. And these enhancements in ZnO-TiO₂/N3/Ag compared to ZnO + TiO₂/N3/Ag appear with 476.5 and 532 nm excitation, which are particularly large with 532 nm excitation. Accordingly, the participation of Ag in this synergistic effect can reduce its energy threshold, which will make it easier to appear. Finally, to rationalize these extra enhancements, the models describing the CT mechanism have been proposed. Thus, the use of the dendritic crystal ZnO-TiO₂ composite semiconductor in the semiconductor/N3/Ag system can improve the adsorption capacity of N3 compared to that with TiO₂. Meanwhile, the synergistic effect of ZnO-TiO₂ and Ag can promote the CT process, demonstrating that ZnO-TiO₂/N3/Ag is an excellent structure for DSSCs.

Synthesis and characterization of noble metal-titania core-shell nanostructures with tunable shell thickness

Core-shell nanostructures have found applications in many fields, including surface enhanced spectroscopy, catalysis and solar cells. Titania-coated noble metal nanoparticles, which combine the surface plasmon resonance properties of the core and the photoactivity of the shell, have great potential for these applications. However, the controllable synthesis of such nanostructures remains a challenge due to the high reactivity of titania precursors. Hence, a simple titania coating method that would allow better control over the shell formation is desired. A sol-gel based titania coating method, which allows control over the shell thickness, was developed and applied to the synthesis of Ag@TiO₂ and Au@TiO₂ with various shell thicknesses. The morphology of the synthesized structures was investigated using scanning electron microscopy (SEM). Their sizes and shell thicknesses were determined using tunable resistive pulse sensing (TRPS) technique. The optical properties of the synthesized structures were characterized using UV-vis spectroscopy. Ag@TiO₂ and Au@TiO₂ structures with shell thickness in the range of ≈40-70 nm and 90 nm, for the Ag and Au nanostructures respectively, were prepared using a method we developed and adapted, consisting of a change in the titania precursor concentration. The synthesized nanostructures exhibited significant absorption in the UV-vis range. The TRPS technique was shown to be a very useful tool for the characterization of metal-metal oxide core-shell nanostructures.

ZnO Film UV Photodetector with Enhanced Performance: Heterojunction with CdMoO4 Microplates and the Hot Electron Injection Effect of Au Nanoparticles

A novel CdMoO₄ -ZnO composite film is prepared by spin-coating CdMoO₄ microplates on ZnO film and is constructed as a heterojunction photodetector (PD). With an optimized loading amount of CdMoO₄ microplates, this composite film PD achieves a ≈18-fold higher responsivity than pure ZnO film PD at 5 V bias under 350 nm (0.15 mW cm^-2 ) UV light illumination, and its decay time shortens to half of the original value. Furthermore, Au nanoparticles are then deposited to modify the CdMoO₄ -ZnO composite film, and the as-constructed photodetector with an optimized deposition time of Au nanoparticles yields an approximately two-fold higher photocurrent under the same condition, and the decay time reduces by half. The introduced CdMoO₄ microplates form type-II heterojunctions with ZnO film and improve the photoelectric performance. The hot electrons from Au nanoparticles are injected into the CdMoO₄ -ZnO composite film, leading to the increased photocurrent. When the light is off, the Schottky barriers formed between Au nanoparticles and CdMoO₄ -ZnO composite film block the carrier transportation and accelerate the decay process of current. The study on Au-nanoparticle-modified CdMoO₄ -ZnO composite film provides a facile method to construct ZnO film based PD with novel structure and high photoelectric performance.

Effect of Gold Nanoparticle Distribution in TiO2 on the Optical and Electrical Characteristics of Dye-Sensitized Solar Cells

Photoanodes comprising Au nanoparticles (GNPs) and thin TiO₂ layers with a stacked structure were fabricated by repeating the application of TiO₂ paste and GNP solutions on conductive glass to vary the distribution of GNPs in the TiO₂ layer. The plasmon-enhanced characteristics of dye-sensitized solar cells (DSSCs) with such photoanodes were investigated. Both the absorption of the TiO₂ layer and the performance of the DSSC are found to be most increased by plasmonic enhancement when GNPs are concentrated near the position in the TiO₂ layer, which is the penetration depth of the incident light of wavelength corresponding to the maximum absorption of the N719 dye (~ 520 nm). When a GNP layer with a relatively high density of 1.3 μg/cm² density was formed at its position, and two GNP layers with a relatively low density of 0.65 μg/cm² were formed near the front side of the incident light, the short-circuit current density (Jsc) and energy conversion efficiency (η) of the DSSC were found to be 10.8 mA/cm² and 5.0%, increases of 15 and 11%, respectively, compared with those of the DSSC without GNPs. Our work suggests that optimization of the distribution of GNPs in the TiO₂ layer is very important for improving the performance of DSSCs fabricated by utilizing GNPs.

Plasmon-enhanced light-driven water oxidation by a dye-sensitized photoanode

Dye-sensitized photoelectrosynthesis cells (DSPECs) provide a flexible approach for solar water splitting based on the integration of molecular light absorption and catalysis on oxide electrodes. Recent advances in this area, including the use of core/shell oxide interfacial structures and surface stabilization by atomic layer deposition, have led to improved charge-separation lifetimes and the ability to obtain substantially improved photocurrent densities. Here, we investigate the introduction of Ag nanoparticles into the core/shell structure and report that they greatly enhance light-driven water oxidation at a DSPEC photoanode. Under 1-sun illumination, Ag nanoparticle electrodes achieved high photocurrent densities, surpassing 2 mA cm^-2 with an incident photon-to-current efficiency of 31.8% under 450-nm illumination.

Dual-Function Au@Y2O3:Eu3+ Smart Film for Enhanced Power Conversion Efficiency and Long-Term Stability of Perovskite Solar Cells

In the present study, a dual-functional smart film combining the effects of wavelength conversion and amplification of the converted wave by the localized surface plasmon resonance has been investigated for a perovskite solar cell. This dual-functional film, composed of Au nanoparticles coated on the surface of Y₂O₃:Eu³⁺ phosphor (Au@Y₂O₃:Eu³⁺) nanoparticle monolayer, enhances the solar energy conversion efficiency to electrical energy and long-term stability of photovoltaic cells. Coupling between the Y₂O₃:Eu³⁺ phosphor monolayer and ultraviolet solar light induces the latter to be converted into visible light with a quantum yield above 80%. Concurrently, the Au nanoparticle monolayer on the phosphor nanoparticle monolayer amplifies the converted visible light by up to 170%. This synergy leads to an increased solar light energy conversion efficiency of perovskite solar cells. Simultaneously, the dual-function film suppresses the photodegradation of perovskite by UV light, resulting in long-term stability. Introducing the hybrid smart Au@Y₂O₃:Eu³⁺ film in perovskite solar cells increases their overall solar-to-electrical energy conversion efficiency to 16.1% and enhances long-term stability, as compared to the value of 15.2% for standard perovskite solar cells. The synergism between the wavelength conversion effect of the phosphor nanoparticle monolayer and the wave amplification by the localized surface plasmon resonance of the Au nanoparticle monolayer in a perovskite solar cell is comparatively investigated, providing a viable strategy of broadening the solar spectrum utilization.

Silver Nanoparticle Generators: Silicon Dioxide Microspheres

A green and simple approach has been developed to synthesize un-coated Ag nanoparticles (AgNPs) in situ on the surface of thiol-group-functionalized silica dioxide microspheres (TSMs) in the aqueous solution. As soon as the Ag⁺ ions attach onto the surface of TSMs, nucleation and growth of AgNPs can spontaneously complete within one minute without other reducing agents or capping agents. The main reason is that the self-assembled silane-layer formed by mercaptosilane molecules could reduce the Ag⁰ formation energy, transport electrons efficiently, improve the nucleation density, and protect AgNPs against oxidation. Thus, the supported AgNPs show excellent chemical/photochemical stability in air and solution. Meanwhile, the size of as-prepared AgNPs could be controlled by tuning the concentration of Ag⁺ ions. This process provides a general route to generate bare AgNPs on the surface of silica dioxide in situ, which might be extended to other materials and is promising in developing novel methodologies for making supported noble metal NPs with desired structure and properties.

Compound Copper Chalcogenide Nanocrystals

This review captures the synthesis, assembly, properties, and applications of copper chalcogenide NCs, which have achieved significant research interest in the last decade due to their compositional and structural versatility. The outstanding functional properties of these materials stems from the relationship between their band structure and defect concentration, including charge carrier concentration and electronic conductivity character, which consequently affects their optoelectronic, optical, and plasmonic properties. This, combined with several metastable crystal phases and stoichiometries and the low energy of formation of defects, makes the reproducible synthesis of these materials, with tunable parameters, remarkable. Further to this, the review captures the progress of the hierarchical assembly of these NCs, which bridges the link between their discrete and collective properties. Their ubiquitous application set has cross-cut energy conversion (photovoltaics, photocatalysis, thermoelectrics), energy storage (lithium-ion batteries, hydrogen generation), emissive materials (plasmonics, LEDs, biolabelling), sensors (electrochemical, biochemical), biomedical devices (magnetic resonance imaging, X-ray computer tomography), and medical therapies (photochemothermal therapies, immunotherapy, radiotherapy, and drug delivery). The confluence of advances in the synthesis, assembly, and application of these NCs in the past decade has the potential to significantly impact society, both economically and environmentally.

Lead-Sulfide-Selenide Quantum Dots and Gold-Copper Alloy Nanoparticles Augment the Light-Harvesting Ability of Solar Cells

Lead-sulfide-selenide (PbSSe) quantum dots (QDs) and gold-copper (AuCu) alloy nanoparticles (NPs) were incorporated into a cadmium sulfide (CdS)/titanium oxide (TiO₂ ) photoanode for the first time to achieve enhanced conversion of solar energy into electricity. PbSSe QDs with a band gap of 1.02 eV extend the light-harvesting range of the photoanode from the visible region to the near-infrared region. The conduction band (CB) edge of the PbSSe QDs is wedged between the CBs of TiO₂ and CdS; this additional level coupled with the good electrical conductivity of the dots facilitate charge transport and collection, and a high power conversion efficiency (PCE) of 4.44 % is achieved for the champion cell with the TiO₂ /PbSSe/CdS electrode. Upon including AuCu alloy NPs in the QD-sensitized electrodes, light absorption is enhance by plasmonic and light-scattering effects and also by the injection of hot electrons to the CBs of the QDs. Comparison of the incident photon-to-current conversion efficiency enhancement factors in addition to fluorescence decay and impedance studies reveal that the PbSSe QDs and AuCu alloy NPs promote charge injection to the current collector and increase the photogenerated charges produced, which thus enables the TiO₂ /PbSSe/CdS/AuCu cell to deliver the highest PCE of 5.26 % among all the various photoanode compositions used.

Ultrathin tin oxide layer-wrapped gold nanoparticles induced by laser ablation in solutions and their enhanced performances

A simple and flexible method of preparing an ultrathin semiconducting oxide layer-wrapped gold nanoparticles (NPs) is presented. The method is a single-step procedure based on laser ablation in a precursor solution. The spherical Au NPs (<20nm in mean size) wrapped with a SnO₂ layer of approximately 2nm in thickness are formed after the laser ablation of a gold target in SnCl₄ solutions with concentrations of 0.01-0.1M. The thickness of such SnO₂ shell is nearly independent of Au particle sizes. Results reveal that the formation of Au@SnO₂ NPs involves a two-step process: the laser ablation-induced formation of Au NPs and subsequent Coulomb effect-based colloidal attachment and self-assembly on the Au NPs. Au@SnO₂ NPs-built film exhibits significantly stronger surface-enhanced Raman scattering effect to organic phosphor molecules (phenylphosphonic acid) and much better gas sensing performance to H₂S at room temperature compared with the bare Au NPs and pure SnO₂ NPs films, respectively. This work presents a simple route to fabricating noble-metal NPs wrapped with symmetrical and ultrathin semiconducting oxide shells.

Ultrafast carrier dynamics in bimetallic nanostructure-enhanced methylammonium lead bromide perovskites

In this work, we examine the impact of hybrid bimetallic Au/Ag core/shell nanostructures on the carrier dynamics of methylammonium lead tribromide (MAPbBr₃) mesoporous perovskite solar cells (PSCs). Plasmon-enhanced PSCs incorporated with Au/Ag nanostructures demonstrated improved light harvesting and increased power conversion efficiency by 26% relative to reference devices. Two complementary spectral techniques, transient absorption spectroscopy (TAS) and time-resolved photoluminescence (trPL), were employed to gain a mechanistic understanding of plasmonic enhancement processes. TAS revealed a decrease in the photobleach formation time, which suggests that the nanostructures improve hot carrier thermalization to an equilibrium distribution, relieving hot phonon bottleneck in MAPbBr₃ perovskites. TAS also showed a decrease in carrier decay lifetimes, indicating that nanostructures enhance photoinduced carrier generation and promote efficient electron injection into TiO₂ prior to bulk recombination. Furthermore, nanostructure-incorporated perovskite films demonstrated quenching in steady-state PL and decreases in trPL carrier lifetimes, providing further evidence of improved carrier injection in plasmon-enhanced mesoporous PSCs.