Silicon nanowire polytypes: identification by Raman spectroscopy, generation mechanism, and misfit strain in homostructures

Thermal Conductivity in Biphasic Silicon Nanowires

The work unravels the previously unexplored atomic-scale mechanism involving the interaction of phonons with crystal homointerfaces. Silicon nanowires with engineered isotopic content and crystal phases were chosen for this investigation. Crystal polytypism, manifested by the presence of both diamond cubic and rhombohedral phases within the same nanowire, provided a testbed to study the impact of phase homointerfaces on phonon transport. The lattice thermal conductivity and its temperature response were found to be markedly different in the presence of polytypism. Its origin, however, was not traced to any acoustic mismatch as the polytypic nanowires presented a similar phonon spectrum as their counterparts. Rather, phenomenological modeling and atomistic simulations identified and quantified the role of atomically rough homointerfaces and the subsequent phonon scattering from such homointerfaces in shaping the phonon behavior. This framework provides the inputs necessary to advance the design and modeling of phonon transport in nanoscale semiconductors.

Growth and analysis of the tetragonal (ST12) germanium nanowires

New semiconducting materials, such as state-of-the-art alloys, engineered composites and allotropes of well-established materials can demonstrate unique physical properties and generate wide possibilities for a vast range of applications. Here we demonstrate, for the first time, the fabrication of a metastable allotrope of Ge, tetragonal germanium (ST12-Ge), in nanowire form. Nanowires were grown in a solvothermal-like single-pot method using supercritical toluene as a solvent, at moderate temperatures (290-330 °C) and a pressure of ∼48 bar. One-dimensional (1D) nanostructures of ST12-Ge were achieved via a self-seeded vapour-liquid-solid (VLS)-like paradigm, with the aid of an in situ formed amorphous carbonaceous layer. The ST12 phase of Ge nanowires is governed by the formation of this carbonaceous structure on the surface of the nanowires and the creation of Ge-C bonds. The crystalline phase and structure of the ST12-Ge nanowires were confirmed by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and Raman spectroscopy. The nanowires produced displayed a high aspect ratio, with a very narrow mean diameter of 9.0 ± 1.4 nm, and lengths beyond 4 μm. The ST12-Ge nanowire allotrope was found to have a profound effect on the intensity of the light emission and the directness of the bandgap, as confirmed by a temperature-dependent photoluminescence study.

Programming Semiconductor Nanowire Composition with Sub-100 nm Resolution via the Geode Process

We demonstrate the vapor-liquid-solid growth of single-crystalline i-Si, i-Si/n-Si, and Si_xGe_1-x/Si_yGe_1-y nanowires via the Geode process. By enabling nanowire growth on the large internal surface area of a microcapsule powder, the Geode process improves the scalability of semiconductor nanowire manufacturing while maintaining nanoscale programmability. Here, we show that heat and mass transport limitations introduced by the microcapsule wall are negligible, enabling the same degree of compositional control for nanowires grown inside microcapsules and on conventional flat substrates. Efficient heat and mass transport also minimize the structural variations of nanowires grown in microcapsules with different diameters and wall thicknesses. Nanowires containing at least 16 segments and segment lengths below 75 nm are demonstrated.

Fluorescent Biosensors Based on Silicon Nanowires

Nanostructures are arising as novel biosensing platforms promising to surpass current performance in terms of sensitivity, selectivity, and affordability of standard approaches. However, for several nanosensors, the material and synthesis used make the industrial transfer of such technologies complex. Silicon nanowires (NWs) are compatible with Si-based flat architecture fabrication and arise as a hopeful solution to couple their interesting physical properties and surface-to-volume ratio to an easy commercial transfer. Among all the transduction methods, fluorescent probes and sensors emerge as some of the most used approaches thanks to their easy data interpretation, measure affordability, and real-time in situ analysis. In fluorescent sensors, Si NWs are employed as substrate and coupled with several fluorophores, NWs can be used as quenchers in stem-loop configuration, and have recently been used for direct fluorescent sensing. In this review, an overview on fluorescent sensors based on Si NWs is presented, analyzing the literature of the field and highlighting the advantages and drawbacks for each strategy.

Bulk Crystalline 4H-Silicon through a Metastable Allotropic Transition

We report the synthesis of bulk, highly oriented, crystalline 4H hexagonal silicon (4H-Si), through a metastable phase transformation upon heating the single-crystalline Si_{24} allotrope. Remarkably, the resulting 4H-Si crystallites exhibit an orientation relationship with the Si_{24} crystals, indicating a structural relationship between the two phases. Optical absorption measurements reveal that 4H-Si exhibits an indirect band gap near 1.2 eV, in agreement with first principles calculations. The metastable crystalline transition pathway provides a novel route to access bulk crystalline 4H-Si in contrast to previous transformation paths that yield only nanocrystalline-disordered materials.

Selective growth of zinc blende, wurtzite and hybrid SiC nanowires via a simple chemical vapor deposition route

3C-SiC, 2H-SiC and their hybrid nanowires were synthesized in a controllable manner via changing CH₄ flow rates. It is found that higher CH₄ supply facilitates the wurtzite phase growth, while the other phases formed when decreasing the flow rate.

Photo-induced cubic-to-hexagonal polytype transition in silicon nanowires

Crystalline phase transformation in silicon nanowires from cubic diamond to hexagonal diamond under strong laser excitation, caused by inhomogeneous heating-induced mechanical stresses.

Nature of Hexagonal Silicon Forming via High-Pressure Synthesis: Nanostructured Hexagonal 4H Polytype

Hexagonal Si allotropes are expected to enhance light absorption in the visible range as compared to common cubic Si with diamond structure. Therefore, synthesis of these materials is crucial for the development of Si-based optoelectronics. In this work, we combine in situ high-pressure high-temperature synthesis and vacuum heating to obtain hexagonal Si. High pressure is one of the most promising routes to stabilize these allotropes. It allows one to obtain large-volume nanostructured ingots by a sequence of direct solid-solid transformations, ensuring high-purity samples for detailed characterization. Thanks to our synthesis approach, we provide the first evidence of a polycrystalline bulk sample of hexagonal Si. Exhaustive structural analysis, combining fine-powder X-ray and electron diffraction, afforded resolution of the crystal structure. We demonstrate that hexagonal Si obtained by high-pressure synthesis correspond to Si-4H polytype (ABCB stacking) in contrast with Si-2H (AB stacking) proposed previously. This result agrees with prior calculations that predicted a higher stability of the 4H form over 2H form. Further physical characterization, combining experimental data and ab initio calculations, have shown a good agreement with the established structure. Strong photoluminescence emission was observed in the visible region for which we foresee optimistic perspectives for the use of this material in Si-based photovoltaics.

Reduction of Thermal Conductivity in Nanowires by Combined Engineering of Crystal Phase and Isotope Disorder

Nanowires are a versatile platform to investigate and harness phonon and thermal transport phenomena in nanoscale systems. With this perspective, we demonstrate herein the use of crystal phase and mass disorder as effective degrees of freedom to manipulate the behavior of phonons and control the flow of local heat in silicon nanowires. The investigated nanowires consist of isotopically pure and isotopically mixed nanowires bearing either a pure diamond cubic or a cubic-rhombohedral polytypic crystal phase. The nanowires with tailor-made isotopic compositions were grown using isotopically enriched silane precursors ²⁸SiH₄, ²⁹SiH₄, and ³⁰SiH₄ with purities better than 99.9%. The analysis of polytypic nanowires revealed ordered and modulated inclusions of lamellar rhombohedral silicon phases toward the center in otherwise diamond-cubic lattice with negligible interphase biaxial strain. Raman nanothermometry was employed to investigate the rate at which the local temperature of single suspended nanowires evolves in response to locally generated heat. Our analysis shows that the lattice thermal conductivity in nanowires can be tuned over a broad range by combining the effects of isotope disorder and the nature and degree of polytypism on phonon scattering. We found that the thermal conductivity can be reduced by up to ∼40% relative to that of isotopically pure nanowires, with the lowest value being recorded for the rhombohedral phase in isotopically mixed ²⁸Si _x³⁰Si_{1- x} nanowires with composition close to the highest mass disorder ( x ∼ 0.5). These results shed new light on the fundamentals of nanoscale thermal transport and lay the groundwork to design innovative phononic devices.

Crystal Phase Effects in Si Nanowire Polytypes and Their Homojunctions

Recent experimental investigations have confirmed the possibility to synthesize and exploit polytypism in group IV nanowires. Driven by this promising evidence, we use first-principles methods based on density functional theory and many-body perturbation theory to investigate the electronic and optical properties of hexagonal-diamond and cubic-diamond Si NWs as well as their homojunctions. We show that hexagonal-diamond NWs are characterized by a more pronounced quantum confinement effect than cubic-diamond NWs. Furthermore, they absorb more light in the visible region with respect to cubic-diamond ones and, for most of the studied diameters, they are direct band gap materials. The study of the homojunctions reveals that the diameter has a crucial effect on the band alignment at the interface. In particular, at small diameters the band-offset is type-I whereas at experimentally relevant sizes the offset turns up to be of type-II. These findings highlight intriguing possibilities to modulate electron and hole separations as well as electronic and optical properties by simply modifying the crystal phase and the size of the junction.

Synthesis of Bulk BC8 Silicon Allotrope by Direct Transformation and Reduced-Pressure Chemical Pathways

Phase-pure samples of a metastable allotrope of silicon, Si-III or BC8, were synthesized by direct elemental transformation at 14 GPa and ∼900 K and also at significantly reduced pressure in the Na-Si system at 9.5 GPa by quenching from high temperatures ∼1000 K. Pure sintered polycrystalline ingots with dimensions ranging from 0.5 to 2 mm can be easily recovered at ambient conditions. The chemical route also allowed us to decrease the synthetic pressures to as low as 7 GPa, while pressures required for direct phase transition in elemental silicon are significantly higher. In situ control of the synthetic protocol, using synchrotron radiation, allowed us to observe the underlying mechanism of chemical interactions and phase transformations in the Na-Si system. Detailed characterization of Si-III using X-ray diffraction, Raman spectroscopy, (29)Si NMR spectroscopy, and transmission electron microscopy are discussed. These large-volume syntheses at significantly reduced pressures extend the range of possible future bulk characterization methods and applications.

Epitaxial diamond-hexagonal silicon nano-ribbon growth on (001) silicon

Silicon crystallizes in the diamond-cubic phase and shows only a weak emission at 1.1 eV. Diamond-hexagonal silicon however has an indirect bandgap at 1.5 eV and has therefore potential for application in opto-electronic devices. Here we discuss a method based on advanced silicon device processing to form diamond-hexagonal silicon nano-ribbons. With an appropriate temperature anneal applied to densify the oxide fillings between silicon fins, the lateral outward stress exerted on fins sandwiched between wide and narrow oxide windows can result in a phase transition from diamond-cubic to diamond-hexagonal Si at the base of these fins. The diamond-hexagonal slabs are generally 5-8 nm thick and can extend over the full width and length of the fins, i.e. have a nano-ribbon shape along the fins. Although hexagonal silicon is a metastable phase, once formed it is found being stable during subsequent high temperature treatments even during process steps up to 1050 ºC.

Facile production of stable silicon nanoparticles: laser chemistry coupled to in situ stabilization via room temperature hydrosilylation

Stable, alkyl-terminated, light-emitting silicon nanoparticles have been synthesized in a continuous process by laser pyrolysis of a liquid trialkyl-silane precursor selected as a safer alternative to gas silane (SiH4). Stabilization was achieved by in situ reaction using a liquid collection system instead of the usual solid state filtration. The alkene contained in the collection liquid (1-dodecene) reacted with the newly formed silicon nanoparticles in an unusual room-temperature hydrosilylation process. It was achieved by the presence of fluoride species, also produced during laser pyrolysis from the decomposition of sulfur hexafluoride (SF6) selected as a laser sensitizer. This process directly rendered alkyl-passivated silicon nanoparticles with consistent morphology and size (<3 nm), avoiding the use of costly post-synthetic treatments.

Broadband infrared photoluminescence in silicon nanowires with high density stacking faults

Making silicon an efficient light-emitting material is an important goal of silicon photonics. Here we report the observation of broadband sub-bandgap photoluminescence in silicon nanowires with a high density of stacking faults. The photoluminescence becomes stronger and exhibits a blue shift under higher laser powers. The super-linear dependence on excitation intensity indicates a strong competition between radiative and defect-related non-radiative channels, and the spectral blue shift is ascribed to the band filling effect in the heterostructures of wurtzite silicon and cubic silicon created by stacking faults.

Silicon nanowire-based fluorescent nanosensor for complexed Cu2+ and its bioapplications

A silicon nanowires (SiNWs)-based fluorescent sensor for complexed Cu(2+) was realized. High sensitivity and selectivity of the present sensor facilitate its bioapplications. The sensor was successfully used to detect the Cu(2+) in liver extract. Meanwhile, real-time and in situ monitoring of Cu(2+) released from apoptotic HeLa cell was performed using the as-prepared SiNW arrays-based sensor. These results indicate that the present SiNWs-based sensor would be of potential applications in revealing the physiological and pathological roles of Cu(2+).

Interplay between defect propagation and surface hydrogen in silicon nanowire kinking superstructures

Semiconductor nanowire kinking superstructures, particularly those with long-range structural coherence, remain difficult to fabricate. Here, we combine high-resolution electron microscopy with operando infrared spectroscopy to show why this is the case for Si nanowires and, in doing so, reveal the interplay between defect propagation and surface chemistry during ⟨211⟩ → ⟨111⟩ and ⟨211⟩ → ⟨211⟩ kinking. Our experiments show that adsorbed hydrogen atoms are responsible for selecting ⟨211⟩-oriented growth and indicate that a twin boundary imparts structural coherence. The twin boundary, only continuous at ⟨211⟩ → ⟨211⟩ kinks, reduces the symmetry of the trijunction and limits the number of degenerate directions available to the nanowire. These findings constitute a general approach for rationally engineering kinking superstructures and also provide important insight into the role of surface chemical bonding during vapor-liquid-solid synthesis.

Polarity-driven polytypic branching in cu-based quaternary chalcogenide nanostructures

An appropriate way of realizing property nanoengineering in complex quaternary chalcogenide nanocrystals is presented for Cu2CdxSnSey(CCTSe) polypods. The pivotal role of the polarity in determining morphology, growth, and the polytypic branching mechanism is demonstrated. Polarity is considered to be responsible for the formation of an initial seed that takes the form of a tetrahedron with four cation-polar facets. Size and shape confinement of the intermediate pentatetrahedral seed is also attributed to polarity, as their external facets are anion-polar. The final polypod extensions also branch out as a result of a cation-polarity-driven mechanism. Aberration-corrected scanning transmission electron microscopy is used to identify stannite cation ordering, while ab initio studies are used to show the influence of cation ordering/distortion, stoichiometry, and polytypic structural change on the electronic band structure.

Power-dependent Raman analysis of highly strained Si nanobridges

Strain analysis of complex three-dimensional nanobridges conducted via Raman spectroscopy requires careful experimentation and data analysis supported by simulations. A method combining micro-Raman spectroscopy with finite element analysis is presented, enabling a detailed understanding of strain-sensitive Raman data measured on Si nanobridges. Power-dependent measurements are required to account for the a priori unknown scattering efficiency related to size and geometry. The experimental data is used to assess the validity of previously published phonon deformation potentials.

Visible and infra-red light emission in boron-doped wurtzite silicon nanowires

Silicon, the mainstay semiconductor in microelectronic circuitry, is considered unsuitable for optoelectronic applications owing to its indirect electronic band gap, which limits its efficiency as a light emitter. Here we show the light emission properties of boron-doped wurtzite silicon nanowires measured by cathodoluminescence spectroscopy at room temperature. A visible emission, peaked above 1.5 eV, and a near infra-red emission at 0.8 eV correlate respectively to the direct transition at the Γ point and to the indirect band-gap of wurtzite silicon. We find additional intense emissions due to boron intra-gap states in the short wavelength infra-red range. We present the evolution of the light emission properties as function of the boron doping concentration and the growth temperature.

Formation of stacking faults and the screw dislocation-driven growth: a case study of aluminum nitride nanowires

Stacking faults are an important class of crystal defects commonly observed in nanostructures of close packed crystal structures. They can bridge the transition between hexagonal wurtzite (WZ) and cubic zinc blende (ZB) phases, with the most known example represented by the "nanowire (NW) twinning superlattice". Understanding the formation mechanisms of stacking faults is crucial to better control them and thus enhance the capability of tailoring physical properties of nanomaterials through defect engineering. Here we provide a different perspective to the formation of stacking faults associated with the screw dislocation-driven growth mechanism of nanomaterials. With the use of NWs of WZ aluminum nitride (AlN) grown by a high-temperature nitridation method as the model system, dislocation-driven growth was first confirmed by transmission electron microscopy (TEM). Meanwhile numerous stacking faults and associated partial dislocations were also observed and identified to be the Type I stacking faults and the Frank partial dislocations, respectively, using high-resolution TEM. In contrast, AlN NWs obtained by rapid quenching after growth displayed no stacking faults or partial dislocations; instead many of them had voids that were associated with the dislocation-driven growth. On the basis of these observations, we suggest a formation mechanism of stacking faults that originate from dislocation voids during the cooling process in the syntheses. Similar stacking fault features were also observed in other NWs with WZ structure, such as cadmium sulfide (CdS) and zinc oxide (ZnO).

Preparing the way for doping wurtzite silicon nanowires while retaining the phase

It is demonstrated that boron-doped nanowires have predominantly long-term stable wurtzite phase while the majority of phosphorus-doped ones present diamond phase. A simplified model based on the different solubility of boron and phosphorus in gold is proposed to explain their diverse effectiveness in retaining the wurtzite phase. The wurtzite nanowires present a direct transition at the Γ point at approximately 1.5 eV while the diamond ones have a predominant emission around 1.1 eV. The aforementioned results are intriguing for innovative solar cell devices.

Growth mechanisms and process window for InAs V-shaped nanoscale membranes on Si[001]

Organized growth of high aspect-ratio nanostructures such as membranes is interesting for opto-electronic and energy harvesting applications. Recently, we reported a new form of InAs nano-membranes grown on Si substrates with enhanced light scattering properties. In this paper we study how to tune the morphology of the membranes by changing the growth conditions. We examine the role of the V/III ratio, substrate temperature, mask opening size and inter-hole distances in determining the size and shape of the structures. Our results show that the nano-membranes form by a combination of the growth mechanisms of nanowires and the Stranski-Krastanov type of quantum dots: in analogy with nanowires, the length of the membranes strongly depends on the growth temperature and the V/III ratio; the inter-hole distance of the sample determines two different growth regimes: competitive growth for small distances and an independent regime for larger distances. Conversely, and similarly to quantum dots, the width of the nano-membranes increases with the growth temperature and does not exhibit dependence on the V/III ratio. These results constitute an important step towards achieving rational design of high aspect-ratio nanostructures.

Sidewall morphology-dependent formation of multiple twins in Si nanowires

Precise placement of twin boundaries and stacking faults promises new opportunities to fundamentally manipulate the optical, electrical, and thermal properties of semiconductor nanowires. Here we report on the appearance of consecutive twin boundaries in Si nanowires and show that sidewall morphology governs their spacing. Detailed electron microscopy analysis reveals that thin {111} sidewall facets, which elongate following the first twin boundary (TB1), are responsible for deforming the triple-phase line and favoring the formation of the second twin boundary (TB2). While multiple, geometrically correlated defect planes are known in group III-V nanowires, our findings show that this behavior is also possible in group IV materials.

Origin of polytype formation in VLS-grown Ge nanowires through defect generation and nanowire kinking

We propose layer-by-layer growth mechanisms to account for planar defect generation leading to kinked polytype nanowires. Cs-corrected scanning transmission electron microscopy enabled identification of stacking sequences of distinct polytype bands found in kinked nanowires, and Raman spectroscopy was used to distinguish polytype nanowires from twinned nanowires containing only the 3C diamond cubic phase. The faceting and atomic-scale defect structures of twinned 3C are compared with those of polytype nanowires to develop a common model linking nucleation pinning to nanowire morphology and phase.

Rational defect introduction in silicon nanowires

The controlled introduction of planar defects, particularly twin boundaries and stacking faults, in group IV nanowires remains challenging despite the prevalence of these structural features in other nanowire systems (e.g., II-VI and III-V). Here we demonstrate how user-programmable changes to precursor pressure and growth temperature can rationally generate both transverse twin boundaries and angled stacking faults during the growth of <111> oriented Si nanowires. We leverage this new capability to demonstrate prototype defect superstructures. These findings yield important insight into the mechanism of defect generation in semiconductor nanowires and suggest new routes to engineer the properties of this ubiquitous semiconductor.

Atomic structural analysis of nanowire defects and polytypes enabled through cross-sectional lattice imaging

Correlated transmission electron microscopy imaging, electron diffraction, and Raman spectroscopy are used to investigate the structure of Si nanowires with planar defects. In addition to plan-view imaging, individual defective nanowires are imaged in axial cross-section at specific locations selected in plan-view imaging. This correlated characterization approach enables definitive identification of complex defect structures that give rise to diffraction patterns that have been misinterpreted in the literature. Conclusive evidence for the 9R Si polytype is presented, and the atomic structure of this phase is correlated with kinematically-forbidden reflections in Si diffraction patterns. Despite striking similarities between imaging and diffraction data from twinned nanowires and the 9R polytype, clear distinctions between the structures can be made. Finally, the structural origins of ⅓{422} reflections in Si [111] diffraction patterns are identified.

Polarity assignment in ZnTe, GaAs, ZnO, and GaN-AlN nanowires from direct dumbbell analysis

Aberration corrected scanning transmission electron microscopy (STEM) with high angle annular dark field (HAADF) imaging and the newly developed annular bright field (ABF) imaging are used to define a new guideline for the polarity determination of semiconductor nanowires (NWs) from binary compounds in two extreme cases: (i) when the dumbbell is formed with atoms of similar mass (GaAs) and (ii) in the case where one of the atoms is extremely light (N or O: ZnO and GaN/AlN). The theoretical fundaments of these procedures allow us to overcome the main challenge in the identification of dumbbell polarity. It resides in the separation and identification of the constituent atoms in the dumbbells. The proposed experimental via opens new routes for the fine characterization of nanostructures, e.g., in electronic and optoelectronic fields, where the polarity is crucial for the understanding of their physical properties (optical and electronic) as well as their growth mechanisms.

Diameter and polarization-dependent Raman scattering intensities of semiconductor nanowires

Diameter-dependent Raman scattering in single tapered silicon nanowires is measured and quantitatively reproduced by modeling with finite-difference time-domain simulations. Single crystal tapered silicon nanowires were produced by homoepitaxial radial growth concurrent with vapor-liquid-solid axial growth. Multiple electromagnetic resonances along the nanowire induce broad band light absorption and scattering. Observed Raman scattering intensities for multiple polarization configurations are reproduced by a model that accounts for the internal electromagnetic mode structure of both the exciting and scattered light. Consequences for the application of Stokes to anti-Stokes intensity ratio for the estimation of lattice temperature are discussed.