Catalytic Pt-on-Au nanostructures: why Pt becomes more active on smaller Au particles

Long-term stable wireless smart contact lens for robust digital diabetes diagnosis

Wearable devices for digital continuous glucose monitoring (CGM) have attracted great attention as a new paradigm medical device for diabetes management. However, the relatively inaccurate performance and instability of CGM devices have limited their wide applications in the clinic. Here, we developed hyaluronate (HA) modified Au@Pt bimetallic electrodes for long-term accurate and robust CGM of smart contact lens. After glucose oxidation reaction, the bimetallic electrodes facilitated the rapid decomposition of hydrogen peroxide and charge transfer for robust CGM. The passivation of Au@Pt bimetallic electrode with branch-type thiolated HA prevented the dissolution of Au electrode by chloride ions in tears. In diabetic and normal rabbits, the smart contact lens with HA-Au@Pt bimetallic electrodes enabled the high correlation (ρ = 0.88) CGM with 98.6% clinically acceptable data for 3 weeks. Taken together, we could confirm the feasibility of our smart contact lens for long-term CGM for further clinical development.

Nanocomposite Concept for Electrochemical In Situ Preparation of Pt-Au Alloy Nanoparticles for Formic Acid Oxidation

Herein, we report a straightforward approach for the in situ preparation of Pt-Au alloy nanoparticles from Pt + xAu/C nanocomposites using monometallic colloidal nanoparticles as starting blocks. Four different compositions with fixed Pt content and varying Pt to Au mass ratios from 1:1 up to 1:7 were prepared as formic acid oxidation reaction (FAOR) catalysts. The study was carried out in a gas diffusion electrode (GDE) setup. It is shown that the presence of Au in the nanocomposites substantially improves the FAOR activity with respect to pure Pt/C, which serves as a reference. The nanocomposite with a mass ratio of 1:5 between Pt and Au displays the best performance during potentiodynamic tests, with the electro-oxidation rates, overpotential, and poisoning resistance being improved simultaneously. By comparison, too low or too high Au contributions in the nanocomposites lead to an unbalanced performance in the FAOR. The combination of operando small-angle X-ray scattering (SAXS), scanning transmission electron microscopy (STEM) elemental mapping, and wide-angle X-ray scattering (WAXS) reveals that for the nanocomposite with a 1:5 mass ratio, a conversion between Pt and Au from separate nanoparticles to alloy nanoparticles occurs during continuous potential cycling in formic acid. By comparison, the nanocomposites with lower Au contents, for example, 1:2, exhibit less in situ alloying, and the concomitant performance improvement is less pronounced. On applying identical location transmission electron microscopy (IL-TEM), it is revealed that the in situ alloying is due to Pt dissolution and re-deposition onto Au as well as Pt migration and coalescence with Au nanoparticles.

Bimetallic Nanocatalysts Immobilized in Nanoporous Hydrogels for Long-Term Robust Continuous Glucose Monitoring of Smart Contact Lens

Smart contact lenses for continuous glucose monitoring (CGM) have great potential for huge clinical impact. To date, their development has been limited by challenges in accurate detection of glucose without hysteresis for tear glucose monitoring to track the blood glucose levels. Here, long-term robust CGM in diabetic rabbits is demonstrated by using bimetallic nanocatalysts immobilized in nanoporous hydrogels in smart contact lenses. After redox reaction of glucose oxidase, the nanocatalysts facilitate rapid decomposition of hydrogen peroxide and nanoparticle-mediated charge transfer with drastically improved diffusion via rapid swelling of nanoporous hydrogels. The ocular glucose sensors result in high sensitivity, fast response time, low detection limit, low hysteresis, and rapid sensor warming-up time. In diabetic rabbits, smart contact lens can detect tear glucose levels consistent with blood glucose levels measured by a glucometer and a CGM device, reflecting rapid concentration changes without hysteresis. The CGM in a human demonstrates the feasibility of smart contact lenses for further clinical applications.

Structural and electronic properties of Pt modified Au(100) surface

Investigations on electronic and geometric structures of platinum adsorbed on monocrystalline gold surfaces are important for understanding the remarkable catalytic properties of bimetallic Pt-Au systems. Herein, the morphology of quasi-hexagonal (hex) Au(100) surface after deposition of platinum for coverage up to 0.5 monolayer (ML) has been investigated by scanning tunneling microscopy (STM). For coverage range 0.2-0.4 ML the creation of elongated islands with mono-atomic height is observed. The islands consist of flat phase of disordered Pt-Au alloy which coexists with nanowire-like features with a hex atom arrangement and quantized width. Annealing the Pt/Au(100) system at 100-150 °C changes the surface morphology. The islands disappear and the topmost layer of the surface consists of flat phase of Pt-Au alloy which coexists with the hex-stripes. Small domains of ordered c(2 × 2) structure of Pt-Au alloy are found. The electronic properties of this structure have been investigated by ab-initio calculations. The obtained results allow to distinguish the Pt from Au atoms by their appearance in the STM images. The calculated electronic structures indicate a bonding creation between Pt and Au atoms and an electron d-states redistribution of Pt in comparison to the bare Pt(100)-(1 × 1) surface.

Surface lattice engineering for fine-tuned spatial configuration of nanocrystals

Hybrid nanocrystals combining different properties together are important multifunctional materials that underpin further development in catalysis, energy storage, et al., and they are often constructed using heterogeneous seeded growth. Their spatial configuration (shape, composition, and dimension) is primarily determined by the heterogeneous deposition process which depends on the lattice mismatch between deposited material and seed. Precise control of nanocrystals spatial configuration is crucial to applications, but suffers from the limited tunability of lattice mismatch. Here, we demonstrate that surface lattice engineering can be used to break this bottleneck. Surface lattices of various Au nanocrystal seeds are fine-tuned using this strategy regardless of their shape, size, and crystalline structure, creating adjustable lattice mismatch for subsequent growth of other metals; hence, diverse hybrid nanocrystals with fine-tuned spatial configuration can be synthesized. This study may pave a general approach for rationally designing and constructing target nanocrystals including metal, semiconductor, and oxide.

Pt Deposits on Bi-Modified Pt Electrodes of Nanoparticle and Disk: A Contrasting Behavior of Formic Acid Oxidation

This work presents a contrasting behavior of formic acid oxidation (FAO) on the Pt and Bi deposits on different Pt substrates. Using irreversible adsorption method, Bi and Pt were sequentially deposited on Pt electrodes of nanoparticle (Pt NP) and disk (Pt disk). The deposited layers of Bi and Pt on the Pt substrates were characterized with X-ray photoelectron spectroscopy, transmission microscopy and scanning tunneling microscopy. The electrochemical behaviors and FAO enhancements of Pt NP and Pt disk with deposited Bi only (i.e., Bi/Pt NP and Bi/Pt disk), were similar to each other. However, additional deposition of Pt on Bi/Pt NP and Bi/Pt disk (i.e., Pt/Bi/Pt NP and Pt/Bi/Pt disk) changed the electrochemical behavior and FAO activity in different ways depending on the shapes of the Pt substrates. With Pt/Bi/Pt NP, the hydrogen adsorption was suppressed and the surface oxidation of Pt was enhanced; while with Pt/Bi/Pt disk, the opposite behavior was observed. This difference was interpreted as a stronger interaction between the deposited Bi and Pt on Pt NP than that on Pt disk. The FAO performance on Pt/Bi/Pt NP is much better than that on Pt/Bi/Pt disk, most likely due to the difference in the interaction between the deposited Pt and Bi depending on the shapes of Pt substrates. In designing FAO electrochemical catalysts using Pt and Bi, the shape of a Pt substrate was concluded to be critically considered.

PT-BI Co-Deposit Shell on AU Nanoparticle Core: High Performance and Long Durability for Formic Acid Oxidation

This work presents the catalysts of Pt-Bi shells on Au nanoparticle cores and Pt overlayers on the Pt-Bi shells toward formic acid oxidation (FAO). Pt and Bi were co-deposited on Au nanoparticles (Au NP) via the irreversible adsorption method using a mixed precursor solution of Pt and Bi ions, and the amount of the co-deposits was controlled with the repetition of the deposition cycle. Rinsing of the co-adsorbed ionic layers of Pt and Bi with a H2SO4 solution selectively removed the Bi ions to leave Pt-rich and Bi-lean (<0.4 atomic %) co-deposits on Au NP (Pt-Bi/Au NP), conceptually similar to de-alloying. Additional Pt was deposited over Pt-Bi/Au NPs (Pt/Pt-Bi/Au NPs) to manipulate further the physicochemical properties of Pt-Bi/Au NPs. Transmission electron microscopy revealed the core–shell structures of Pt-Bi/Au NPs and Pt/Pt-Bi/Au NPs, whose shell thickness ranged from roughly four to six atomic layers. Moreover, the low crystallinity of the Pt-containing shells was confirmed with X-ray diffraction. Electrochemical studies showed that the surfaces of Pt-Bi/Au NPs were characterized by low hydrogen adsorption abilities, which increased after the deposition of additional Pt. Durability tests were carried out with 1000 voltammetric cycles between −0.26 and 0.4 V (versus Ag/AgCl) in a solution of 1.0 M HCOOH + 0.1 M H2SO4. The initial averaged FAO performance on Pt-Bi/Au NPs and Pt/Pt-Bi/Au NPs (0.11 ± 0.01 A/mg, normalized to the catalyst weight) was higher than that of a commercial Pt nanoparticle catalyst (Pt NP, 0.023 A/mg) by a factor of ~5, mainly due to enhancement of dehydrogenation and suppression of dehydration. The catalytic activity of Pt/Pt-Bi/Au NP (0.04 ± 0.01 A/mg) in the 1000th cycle was greater than that of Pt-Bi/Au NP (0.026 ± 0.003 A/mg) and that of Pt NP (0.006 A/mg). The reason for the higher durability was suggested to be the low mobility of surface Pt atoms on the investigated catalysts.

Insight into the surface composition of bimetallic nanocatalysts obtained from microemulsions

The enhancement of catalysts efficiency of bimetallic nanoparticles depends on the ability to exert control over surface composition. However, results relating surface composition and feeding solution of bimetallic nanoparticles synthesized in microemulsions are controversial and apparently contradictory. In order to comprehend how the resulting surface can be modified under different synthesis conditions and for different pairs of metals, a computer simulation study was carried out. The resulting surface compositions are explained based on the relative rates of deposition of the two metals, which depend on the particular metal pair, the concentration of reactants and the microemulsion composition. This study provides a satisfactory understanding of experimental results and allows us to identify the main factors affecting the nanoparticle's surface composition. Consequently, concrete and practical guidelines can be established to facilitate the experimental synthesis of bimetallic nanoparticles with tailored surfaces.

Construction of AuPdPt spherical nanodendrites with a multilayered structure by manipulating etching and regrowth in seeded growth

Size-tunable gold–palladium–platinum nanodendrites with a multilayered structure are successfully prepared via etching–regrowth-involved seeded growth, exhibiting superb electrochemical activity for formic acid oxidation.

Bi-Underpotential/PtAu-bulk co-electrodeposition and subsequent Bi dissolution for the electrocatalytic oxidation and amperometric analysis of formaldehyde

A PtAuBi-UPD composite electrocatalyst modified glassy carbon electrode (GCE) is prepared via the simultaneous underpotential deposition (UDP) of Bi and bulk deposition of Pt and Au, followed by stripping of the accessible Bi, and it shows high performance for the electrocatalytic oxidation and amperometric analysis of formaldehyde.

The Mimic Enzyme Properties of Au@PtNRs and the Detection for Ascorbic Acid Based on Their Catalytic Properties

Being superior to natural enzymes, nanoenzymes are drawing a great deal of attention in the field of biosensing. Herein, we developed an ultrasensitive, stable and selective colorimetric assay having dual functionalities of Au-tipped Pt nanorods (NRs). The optical and catalytic properties of Au-tipped Pt NRs were monitored using a spectrophotometer and the chromogenic substrate 3, 3′, 5, 5′-tetramethylbenzidine (TMB) in the presence of H2O2, respectively. We found that Au-tipped Pt NRs exhibited excellent peroxidase-like activity, which decomposed hydrogen peroxide (H2O2) into oxygen (O2). The produced O2 oxidized the chromogenic substrate into a blue color product. The oxidation rate of the chromogenic substrate could be monitored using a spectrophotometer at 652 nm. Notably, the peroxidase-like activity of Au-tipped Pt NRs decreased in the presence of ascorbic acid (AA). The produced O2 preferentially reacted with AA, generating ascorbyl radicals (AA·) instead of oxidizing TMB, and thereby decreased the oxidation rate of TMB. Based on this inhibitory property, a selective colorimetric assay was developed using Au-tipped Pt NRs for the detection of AA. This work offers a novel detection method for AA.

Atomic PdAu Interlayer Sandwiched into Pd/Pt Core/Shell Nanowires Achieves Superstable Oxygen Reduction Catalysis

Rationally designing the core/shell architecture of Pt-based electrocatalysts has been demonstrated as an effective way to induce a surface strain effect for promoting the sluggish kinetics of the oxygen reduction reaction (ORR) at the cathode of fuel cells. However, unstable core dissolution and structural collapse usually occur in Pt-based core/shell catalysts during the long-term cycling operation, greatly impacting actual fuel cell applications. Impeding the dissolution of cores beneath the Pt shells is the key to enhancing the catalytic stability of materials. Herein, a method for sandwiching atomic PdAu interlayers into one-dimensional (1D) Pd/Pt core/shell nanowires (NWs) is developed to greatly boost the catalytic stability of subnanometer Pt shells for ORR. The Pd/PdAu/Pt core/shell/shell NWs display only 7.80% degradation of ORR mass activity over 80 000 potential cycles with no dissolution of Pd cores and good preservation of the holistic sandwich core/shell nanostructures. This is a significant improvement of electrocatalytic stability compared with the Pd/Pt core/shell NWs, which deformed and inactivated over 80 000 potential cycles. The density functional theory (DFT) calculations further demonstrate that the electron-transfer bridge Pd and electron reservoir Au, serving in the PdAu atomic interlayer, both guarantee the preservation of the high electroactivity of surface Pt sites during the long-term ORR stability test. In addition, the Pd/PdAu/Pt NWs show a 1.7-fold higher mass activity (MA) for ORR than the conventional Pd/Pt NWs. The enhanced activity can be attributed to the strong interaction between PdAu interlayers and subnanometer-Pt shells, which suppresses the competitive Pd-4d bands and boosts the surface Pt-5d bands toward the Fermi level for higher electroactivity, proved from DFT.

Bimetallic PtAu electrocatalysts for the oxygen reduction reaction: challenges and opportunities

Highly active, durable oxygen reduction reaction (ORR) electrocatalysts have an essential role in promoting the continuous operation of advanced energy technologies such as fuel cells and metal-air batteries. Considering the scarce reserve of Pt and its unsatisfactory overall performance, there is an urgent demand for the development of new generation ORR electrocatalysts that are substantially better than the state-of-the-art supported Pt-based nanocatalysts, such as Pt/C. Among various nanostructures, bimetallic PtAu represents one unique alloy system where highly contradictory performance has been reported. While it is generally accepted that Au may contribute to stabilizing Pt, its role in modulating the intrinsic activity of Pt remains unclear. This perspective will discuss critical structural issues that affect the intrinsic ORR activities of bimetallic PtAu, with an eye on elucidating the origin of seemingly inconsistent experimental results from the literature. As a relatively new class of electrodes, we will also highlight the performance of dealloyed nanoporous gold (NPG) based electrocatalysts, which allow a unique combination of structural properties highly desired for this important reaction. Finally, we will put forward the challenges and opportunities for the incorporation of these advanced electrocatalysts into membrane electrode assemblies (MEA) for actual fuel cells.

Zero-Dimensional/Two-Dimensional AuxPd100-x Nanocomposites with Enhanced Nanozyme Catalysis for Sensitive Glucose Detection

Here, we report facile fabrication of two-dimensional (2D) Pd nanosheet (NS)-supported zero-dimensional (0D) Au nanoparticles via galvanic replacement. In the synthesis, the surface-clean Pd NSs premade not only acted as a sacrifice template for replacing Pd atoms by Au³⁺ ions, but served as a support substrate to support Au nanoparticles. The morphology, structure, and composition of products relied on the Au/Pd feed atomic ratio. Interestingly, the as-obtained 0D/2D Au_xPd_100-x (x = 4.5, 9.8, and 21) nanocomposites showed remarkably enhanced peroxidase-mimic catalysis in the model oxidation reaction, which followed the typical Michaelis-Menten theory. Compared to Pd NSs, the enhanced catalysis of Au_xPd_100-x was closely related to both the increased specific surface area and the modified electronic structure of Pd NSs, which resulted in a change in the catalytic pathway, that is, from hydroxyl radical generation to rapid electron transfer. The work provides a simple yet efficient avenue to build highly efficient heterogeneous catalysts based on metallic NSs, as exemplified by the superior nanozyme activity of 0D/2D bimetallic nanostructures for glucose detection.

Ultrathin Film PtxPd(1-x) Alloy Catalysts for Formic Acid Oxidation Synthesized by Surface Limited Redox Replacement of Underpotentially Deposited H Monolayer

This work emphasizes the development of a green synthetic approach for growing ultrathin film PtxPd(1-x) alloy catalysts for formic acid oxidation (FAO) by surface limited redox replacement of underpotentially deposited H sacrificial layer. Up to three-monolayers-thick PtxPd(1-x) films with different composition are generated on Au electrodes and characterized for composition and surface roughness using XPS and electrochemical methods, respectively. XPS results show close correlation between solution molar ratio and atomic composition, with slightly higher Pt fraction in the deposited films. The accordingly deposited Pt42Pd58 films demonstrated remarkable specific and mass activities of up to 35 mAcm−2 and 45 Amg−1 respectively, lasting for more than 1500 cycles in FAO tests. This performance, found to be better twice or more than that of pure Pt counterparts, renders the Pt42Pd58 films comparable with the frontrunner FAO catalysts. In addition, the best alloy catalyst establishes a nearly hysteresis-free FAO CV curve a lot earlier than its Pt counterpart and thus supports the direct FAO pathway for longer. Overall, the combination of high Pd activity and CO tolerance with the remarkable Pt stability results in highly active and durable FAO catalysts. Finally, this facile and cost-effective synthetic approach allows for scaling the catalyst production and is thus appropriate for foreseeable commercialization.

On the minimum reactant concentration required to prepare Au/M core-shell nanoparticles by the one-pot microemulsion route

The minimum reactant concentration required to synthesize Au/M (M = Ag, Pt, Pd, Ru …) core-shell nanoparticles by the one-pot microemulsion route was calculated by a simulation model under different synthesis conditions. This minimum concentration was proved to depend on the reduction potential of the slower metal M and on the rigidity of the surfactant film composing the microemulsion. Model results were tested by comparing with Au/M nanoparticles taken from literature. In all cases, experimental data obey model predictions. From this agreement, one can conclude that the smaller the standard potential of the slower reduction metal, the lower the minimum concentration needed to obtain core-shell nanoparticles. In addition, the higher the surfactant flexibility, the higher the minimum concentration to synthesize metal segregated nanoparticles. Model prediction allows to quantify which is the best value of concentration to prepare different pairs of core-shell Au/M nanoparticles in terms of nature of M metal in the couple and microemulsion composition. This outlook may become an advanced tool for fine-tuning Au/M nanostructures.

Graphical Abstract:

Synthesis of Au@Pt Core-Shell Nanoparticles as Efficient Electrocatalyst for Methanol Electro-Oxidation

Bimetallic Au@Pt nanoparticles (NPs) with Pt monolayer shell are of much interest for applications in heterogeneous catalysts because of enhanced catalytic activity and very low Pt-utilization. However, precisely controlled synthesis with uniform Pt-monolayers and stability on the AuNPs seeds remain elusive. Herein, we report the controlled deposition of Pt-monolayer onto uniform AuNPs seeds to obtain Au@Pt core–shell NPs and their Pt-coverage dependent electrocatalytic activity for methanol electro-oxidation. The atomic ratio between Au/Pt was effectively tuned by varying the precursor solution ratio in the reaction solution. The morphology and atomic structure of the Au@Pt NPs were analyzed by high-resolution scanning transmission electron microcopy (HR-STEM) and X-ray diffraction (XRD) techniques. The results demonstrated that the Au@Pt core–shell NPs with Pt-shell thickness (atomic ratio 1:2) exhibit higher electrocatalytic activity for methanol electro-oxidation reaction, whereas higher and lower Pt ratios showed less overall catalytic performance. Such higher catalytic performance of Au@Pt NPs (1:2) can be attributed to the weakened CO binding on the Pt/monolayers surface. Our present synthesis strategy and optimization of the catalytic activity of Au@Pt core–shell NPs catalysts provide promising approach to rationally design highly active catalysts with less Pt-usage for high performance electrocatalysts for applications in fuel cells.

Atomically ordered non-precious Co3Ta intermetallic nanoparticles as high-performance catalysts for hydrazine electrooxidation

Nano-ordered intermetallic compounds have generated great interest in fuel cell applications. However, the synthesis of non-preciousearly transition metal intermetallic nanoparticles remains a formidable challenge owing to the extremely oxyphilic nature and very negative reduction potentials. Here, we have successfully synthesized non-precious Co₃Ta intermetallic nanoparticles, with uniform size of 5 nm. Atomic structural characterizations and X-ray absorption fine structure measurements confirm the atomically ordered intermetallic structure. As electrocatalysts for the hydrazine oxidation reaction, Co₃Ta nanoparticles exhibit an onset potential of −0.086 V (vs. reversible hydrogen electrode) and two times higher specific activity relative to commercial Pt/C (+0.06 V), demonstrating the top-level performance among reported electrocatalysts. The Co-Ta bridge sites are identified as the location of the most active sites thanks to density functional theory calculations. The activation energy of the hydrogen dissociation step decreases significantly upon N₂H₄ adsorption on the Co-Ta bridge active sites, contributing to the significantly enhanced activity.

Intermetallic nanoparticles comprised of early transition metals are attractive for fuel cell applications, but are generally limited to noble metal-based systems. Here, authors report non-precious early transition metal intermetallic nanoparticles with promising electrocatalytic performance for the hydrazine oxidation reaction.

Ternary CoPtAu Nanoparticles as a General Catalyst for Highly Efficient Electro-oxidation of Liquid Fuels

Efficient electro-oxidation of formic acid, methanol, and ethanol is challenging owing to the multiple chemical reaction steps required to accomplish full oxidation to CO₂ . Herein, a ternary CoPtAu nanoparticle catalyst system is reported in which Co and Pt form an intermetallic L1₀ -structure and Au segregates on the surface to alloy with Pt. The L1₀ -structure stabilizes Co and significantly enhances the catalysis of the PtAu surface towards electro-oxidation of ethanol, methanol, and formic acid, with mass activities of 1.55 A/mg_Pt , 1.49 A/mg_Pt , and 11.97 A/mg_Pt , respectively in 0.1 m HClO₄ . The L1₀ -CoPtAu catalyst is also stable, with negligible degradation in mass activities and no obvious Co/Pt/Au composition changes after 10 000 potential cycles. The in situ surface-enhanced infrared absorption spectroscopy study indicates that the ternary catalyst activates the C-C bond more efficiently for ethanol oxidation.

One-pot synthesized Cu/Au/Pt trimetallic nanoparticles with enhanced catalytic and plasmonic properties as a universal platform for biosensing and cancer theranostics

Cu/Au/Pt trimetallic nanoparticles (TMNPs) with enhanced catalytic activity and intense plasmonic absorption in the NIR-I biowindow (650-950 nm) were prepared using a fast, gentle and one-pot protocol. Based on these properties and assembly of thiolated-aptamers on Cu/Au/Pt TMNPs, a universal platform was developed for applications in biosensing and theranostics.

Core@shell nanostructured Au-d@NimPtm for electrochemical oxygen reduction reaction: effect of the core size and shell thickness

Au-d@Ni_mPt_m nanostructures are studied to address the effects of the Au-core size (d) and NiPt-shell thickness (m) on the electrocatalytic performance of Pt for the ORR.

Key Factors for Simultaneous Improvements of Performance and Durability of Core-Shell Pt3 Ni/Carbon Electrocatalysts Toward Superior Polymer Electrolyte Fuel Cell

It remains a big challenge to remarkably improve both oxygen reduction reaction (ORR) activity and long-term durability of Pt-M bimetal electrocatalysts simultaneously in the harsh cathode environment toward widespread commercialization of polymer electrolyte fuel cells (PEFC). In this account we found double-promotional effects of carbon micro coil (CMC) support on ORR performance and durability of octahedral Pt₃ Ni nanoparticles (Oh Pt₃ Ni/CMC). The Oh Pt₃ Ni/CMC displayed remarkable improvements of mass activity (MA; 13.6 and 34.1 times) and surface specific activity (SA; 31.3 and 37.0 times) compared to those of benchmark Pt/C (TEC10E20E) and Pt/C (TEC10E50E-HT), respectively. Notably, the Oh Pt₃ Ni/CMC revealed a negligible MA loss after 50,000 triangular-wave 1.0-1.5 V_RHE (startup/shutdown) load cycles, contrasted to MA losses of 40 % (TEC10E20E) and 21.5 % (TEC10E50E-HT) by only 10,000 load cycles. It was also found that the SA increased exponentially with the decrease in the CO stripping peak potential in a series of Pt-M/carbon (M: Ni and Co), which predicts a maximum SA at the curve asymptote. Key factors for simultaneous improvements of performance and durability of core-shell Pt₃ Ni/carbon electrocatalysts toward superior PEFC is also discussed.

Tuning the Electrocatalytic Performance of Ionic Liquid Modified Pt Catalysts for the Oxygen Reduction Reaction via Cationic Chain Engineering

Modifying Pt catalysts using hydrophobic ionic liquids (ILs) has been demonstrated to be a facile approach for boosting the performance of Pt catalysts for the oxygen reduction reaction (ORR). This work aims to deepen the understanding and initiate a rational molecular tuning of ILs for improved activity and stability. To this end, Pt/C catalysts were modified using a variety of 1-methyl-3-alkylimidazolium bis(trifluoromethanesulfonyl)imide ([C _n C₁im][NTf₂], n = 2-10) ILs with varying alkyl chain lengths in imidazolium cations, and the electrocatalytic properties (e.g., electrochemically active surface area, catalytic activity, and stability) of the resultant catalysts were systematically investigated. We found that ILs with long cationic chains (C6, C10) efficiently suppressed the formation of nonreactive oxygenated species on Pt; however, at the same time they blocked active Pt sites and led to a lower electrochemically active surface area. It is also disclosed that the catalytic activity strongly correlates with the alkyl chain length of cations, and a distinct dependence of intrinsic activity on the alkyl chain length was identified, with the maximum activity obtained on Pt/C-[C₄C₁im][NTf₂]. The optimum arises from the counterbalance between more efficient suppression of oxygenated species formation on Pt surfaces and more severe passivation of Pt surfaces with elongation of the alkyl chain length in imidazolium cations. Moreover, the presence of an IL can also improve the electrochemical stability of Pt catalysts by suppressing the Pt dissolution, as revealed by combined identical-location transmission electron microscopy (TEM) and in situ inductively coupled plasma mass spectrometry (ICP-MS) analyses.

Laser-induced formation of Au/Pt nanorods with peroxidase mimicking and SERS enhancement properties for application to the colorimetric determination of H2O2

Platinum nanoparticles (PtNPs) were uniformly grown on the surface of gold nanorods (AuNRs) by a laser irradiation procedure. Transmission electron microscopy confirmed that the PtNPs are uniformly grown on the surface of the AuNRs. The formation of PtNPs on the AuNRs leads to a red-shift of the absorption maximum from 734 nm to 766 nm. In addition, the efficiency of surface enhanced Raman scattering (SERS) is increased, but the photothermal conversion efficiency is decreased compared to pure AuNRs. The result indicates that electron transfer occurs between gold and platinum. The peroxidase mimicking effect of PtNPs, AuNRs and Au/Pt NRs by catalyzing the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized 3,3',5,5'-tetramethylbenzidine (oxTMB; a quinone) in the presence of H₂O₂. The catalytic activity of Au/Pt NRs is higher than that of sole AuNRs or PtNPs by factors of 4.2 and 2.1, respectively. Thus, Au/Pt NRs have been used for the detection of peroxide and the limit of detection is 0.04 μM. This work provides an approach to integrate the peroxidase mimicking effect with SERS enhancement for potential application in detection. Graphical abstract A schematic diagram for the laser-induced growth of Au/Pt NRs and the colorimetric determination of hydrogen peroxide concentration with their peroxidase mimicking properties. The limit of detection is 0.04 μM based on the use of Au/Pt NRs as a catalyst.