Visualizing and Regulating Dynamic Evolution of Interfacial Electrolyte Configuration during De-solvation Process on Lithium-Metal Anode

Acting as a passive protective layer, solid-electrolyte interphase (SEI) plays a crucial role in maintaining the stability of the Li-metal anode. Derived from the reductive decomposition of electrolytes (e.g., anion and solvent), the SEI construction presents as an interfacial process accompanied by the dynamic de-solvation process during Li-metal plating. However, typical electrolyte engineering and related SEI modification strategies always ignore the dynamic evolution of electrolyte configuration at the Li/electrolyte interface, which essentially determines the SEI architecture. Herein, by employing advanced electrochemical in situ FT-IR and MRI technologies, we directly visualize the dynamic variations of solvation environments involving Li+-solvent/anion. Remarkably, a weakened Li+-solvent interaction and anion-lean interfacial electrolyte configuration have been synchronously revealed, which is difficult for the fabrication of anion-derived SEI layer. Moreover, as a simple electrochemical regulation strategy, pulse protocol was introduced to effectively restore the interfacial anion concentration, resulting in an enhanced LiF-rich SEI layer and improved Li-metal plating/stripping reversibility.

Graphitic Armor: A Natural Molecular Sieve for Robust Hydrogen Electroxidation

Carbon coating layers have been found to improve the catalytic performance of transition metals, which is usually explained as an outcome of electronic synergistic effect. Herein we reveal that the defective graphitic carbon, with a unique interlayer gap of 0.342 nm, can be a highly selective natural molecular sieve. It allows efficient diffusion of hydrogen molecules or radicals both along the in-plane and out-of-plane direction, but sterically hinders the diffusion of molecules with larger kinetic diameter (e.g., CO and O2) along the in-plane direction. As a result, poisonous species lager than 0.342 nm are sieved out, even when their adsorption on the metal is thermodynamically strong; at the same time, the interaction between H2 and the metal is not affected. This natural molecular sieve provides a very chance for constructing robust metal catalysts for hydrogen-relevant processes, which are more tolerant to chemical or electrochemical oxidation or CO-relevant poisoning.

The Lifetime of Hydroxyl Radical in Realistic Fuel Cell Catalyst Layer

The lifetime of hydroxyl radicals (⋅OH) in the fuel cell catalyst layer remains uncertain, which hampers the comprehension of radical-induced degradation mechanisms and the development of longevity strategies for proton-exchange membrane fuel cells (PEMFCs). In this study, we have precisely determined that the lifetime of ⋅OH radicals can extend up to several seconds in realistic fuel cell catalyst layers. This finding reveals that ⋅OH radicals are capable of carrying out long-range attacks spanning at least a few centimeters during PEMFCs operation. Such insights hold great potential for enhancing our understanding of radical-mediated fuel cell degradation processes and promoting the development of durable fuel cell devices.

Constructing the polymer molecules to regulate the electrode/electrolyte interface to enhance lithium-metal battery performance

Lithium-ion batteries, with high energy density and long cycle life, have become the battery of choice for most vehicles and portable electronic devices; however, energy density, safety and cycle life require further improvements. Single-functional group electrolyte additives are very limited in practical applications, a ternary polymer bifunctional electrolyte additive copolymer (acrylonitrile-butyl hexafluoro methacrylate- poly (ethylene glycol) methacrylate- methyl ether) (PMANHF) was synthesized by free radical polymerization of acrylonitrile, 2, 2, 3, 4, 4, 4-hexafluorobutyl methacrylate and poly (ethylene glycol) methyl ether methacrylate. A series of characterizations show that in Li metal anodes, the preferential reduction of PMANHF is conducive to the formation of a uniform and stable solid electrolyte interphase layer, and Li deposition is uniform and dense. At the NCM811 cathode, a film composed of LiF- and Li3N-rich is formed at the cathode-electrolyte interface, mitigating the side reaction at the interface. At 1.0 mA cm-2, the Li/Li cell can be stabilized for 1000 cycles. In addition, the Li/NCM811 cell can stabilize 200 cycles with a cathode capacity of 153.7 mAh g-1, with the capacity retention of 89.93%, at a negative/positive capacity ratio of 2.5. This study brings to light essential ideas for the fabrication of additives for lithium-metal batteries.

Gradient Interphase Engineering Enabled by Anionic Redox for High-Voltage and Long-Life Li-Ion Batteries

Intelligent utilization of the anionic redox reaction (ARR) in Li-rich cathodes is an advanced strategy for the practical implementation of next-generation high-energy-density rechargeable batteries. However, due to the intrinsic complexity of ARR (e.g., nucleophilic attacks), the instability of the cathode-electrolyte interphase (CEI) on a Li-rich cathode presents more challenges than typical high-voltage cathodes. Here, we manipulate CEI interfacial engineering by introducing an all-fluorinated electrolyte and exploiting its interaction with the nucleophilic attack to construct a gradient CEI containing a pair of fluorinated layers on a Li-rich cathode, delivering enhanced interfacial stability. Negative/detrimental nucleophilic electrolyte decomposition has been efficiently evolved to further reinforce CEI fabrication, resulting in the construction of LiF-based indurated outer shield and fluorinated polymer-based flexible inner sheaths. Gradient interphase engineering dramatically improved the capacity retention of the Li-rich cathode from 43 to 71% after 800 cycles and achieved superior cycling stability in anode-free and pouch-type full cells (98.8% capacity retention, 220 cycles), respectively.

Hydrogen Spillover Accelerates Electrocatalytic Semi-hydrogenation of Acetylene in Membrane Electrode Assembly Reactor

Electrocatalytic acetylene semi-hydrogenation (EASH) offers a promising and environmentally friendly pathway for the production of C2H4, a widely used petrochemical feedstock. While the economic feasibility of this route has been demonstrated in three-electrode systems, its viability in practical device remains unverified. In this study, we designed a highly efficient electrocatalyst based on a PdCu alloy system utilizing the hydrogen spillover mechanism. The catalyst achieved an operational current density of 600 mA cm-2 in a zero-gap membrane electrode assembly (MEA) reactor, with the C2H4 selectivity exceeding 85%. This data confirms the economic feasibility of EASH in real-world applications. Furthermore, through in situ Raman spectroscopy and theoretical calculations, we elucidated the catalytic mechanism involving interfacial hydrogen spillover. Our findings underscore the economic viability and potential of EASH as a greener and scalable approach for C2H4 production, thus advancing the field of electrocatalysis in sustainable chemical synthesis.

Manipulated Fluoro-Ether Derived Nucleophilic Decomposition Products for Mitigating Polarization-Induced Capacity Loss in Li-Rich Layered Cathode

Electrolyte engineering is a fascinating choice to improve the performance of Li-rich layered oxide cathodes (LRLO) for high-energy lithium-ion batteries. However, many existing electrolyte designs and adjustment principles tend to overlook the unique challenges posed by LRLO, particularly the nucleophilic attack. Here, we introduce an electrolyte modification by locally replacing carbonate solvents in traditional electrolytes with a fluoro-ether. By benefit of the decomposition of fluoro-ether under nucleophilic O-related attacks, which delivers an excellent passivation layer with LiF and polymers, possessing rigidity and flexibility on the LRLO surface. More importantly, the fluoro-ether acts as "sutures", ensuring the integrity and stability of both interfacial and bulk structures, which contributed to suppressing severe polarization and enhancing the cycling capacity retention from 39 % to 78 % after 300 cycles for the 4.8 V-class LRLO. This key electrolyte strategy with comprehensive analysis, provides new insights into addressing nucleophilic challenge for high-energy anionic redox related cathode systems.

FeN4 Active Sites Electronically Coupled with PtFe Alloys for Ultralow Pt Loading Hybrid Electrocatalysts in Proton Exchange Membrane Fuel Cells

The exorbitant cost of Pt-based electrocatalysts and the poor durability of non-noble metal electrocatalysts for proton exchange membrane fuel cells limited their practical application. Here, FeN4 active sites electronically coupled with PtFe alloys (PtFe-FeNC) were successfully prepared by a vapor deposition strategy as an ultralow Pt loading (0.64 wt %) hybrid electrocatalyst. The FeN4 sites on the FeNC matrix are able to effectively anchor the PtFe alloys, thus inhibiting their aggregation during long-life cycling. These PtFe alloys, in turn, can efficiently restrain the leaching of the FeN4 sites from the FeNC matrix. Thus, the PtFe-FeNC demonstrated an improved Pt mass activity of 2.33 A mgPt-1 at 0.9 V toward oxygen reduction reaction, which is 12.9 times higher than that of commercial Pt/C (0.18 A mgPt-1). It demonstrated great stability, with the Pt mass activity decreasing by only 9.4% after 70,000 cycles. Importantly, the fuel cell with an ultralow Pt loading in the cathode (0.012 mgPt cm-2) displays a high Pt mass activity of 1.75 A mgPt-1 at 0.9 ViR-free, which is significantly better than commercial MEA (0.25 A mgPt-1). Interestingly, PtFe-FeNC catalysts possess enhanced durability, exhibiting a 12.5% decrease in peak power density compared to the 51.7% decrease of FeNC.

One-Step Surface-to-Bulk Modification of High-Voltage and Long-Life LiCoO2 Cathode with Concentration Gradient Architecture

Raising the charging cut-off voltage of layered oxide cathodes can improve their energy density. However, it inevitably introduces instabilities regarding both bulk structure and surface/interface. Herein, exploiting the unique characteristics of high-valence Nb5+ element, a synchronous surface-to-bulk-modified LiCoO2 featuring Li3 NbO4 surface coating layer, Nb-doped bulk, and the desired concentration gradient architecture through one-step calcination is achieved. Such a multifunctional structure facilitates the construction of high-quality cathode/electrolyte interface, enhances Li+ diffusion, and restrains lattice-O loss, Co migration, and associated layer-to-spinel phase distortion. Therefore, a stable operation of Nb-modified LiCoO2 half-cell is achieved at 4.6 V (90.9% capacity retention after 200 cycles). Long-life 250 Wh kg-1 and 4.7 V-class 550 Wh kg-1 pouch cells assembled with graphite and thin Li anodes are harvested (both beyond 87% after 1600 and 200 cycles). This multifunctional one-step modification strategy establishes a technological paradigm to pave the way for high-energy density and long-life lithium-ion cathode materials.

Lattice Engineering on Li2 CO3 -Based Sacrificial Cathode Prelithiation Agent for Improving the Energy Density of Li-Ion Battery Full-Cell

Developing sacrificial cathode prelithiation technology to compensate for active lithium loss is vital for improving the energy density of lithium-ion battery full-cells. Li2 CO3 owns high theoretical specific capacity, superior air stability, but poor conductivity as an insulator, acting as a promising but challenging prelithiation agent candidate. Herein, extracting a trace amount of Co from LiCoO2 (LCO), a lattice engineering is developed through substituting Li sites with Co and inducing Li defects to obtain a composite structure consisting of (Li0.906 Co0.043 ▫0.051 )2 CO2.934 and ball milled LiCoO2 (Co-Li2 CO3 @LCO). Notably, both the bandgap and Li─O bond strength have essentially declined in this structure. Benefiting from the synergistic effect of Li defects and bulk phase catalytic regulation of Co, the potential of Li2 CO3 deep decomposition significantly decreases from typical >4.7 to ≈4.25 V versus Li/Li+ , presenting >600 mAh g-1 compensation capacity. Impressively, coupling 5 wt% Co-Li2 CO3 @LCO within NCM-811 cathode, 235 Wh kg-1 pouch-type full-cell is achieved, performing 88% capacity retention after 1000 cycles.

Surface Passivation of LiCoO2 by Solid Electrolyte Nanoshell for High Interfacial Stability and Conductivity

The practical application of lithium cobalt oxide (LiCoO2 ) cathodes at high voltages is hindered by the instability of the surface structure and side reactions with the electrolyte. Herein, we prepared a multifunctional hierarchical core@double-shell structured LiCoO2 (MS-LCO) cathode material using a scalable sol-gel method. The MS-LCO cathode material comprised an outer shell with fast lithium-ion conductivity, a La/Zr co-doped inner shell, and a bulk LiCoO2 core. The outermost shell prevented direct contact between the electrolyte and LiCoO2 core, which alleviated the electrolyte decomposition and loss of active cobalt, while the La/Zr co-doped shell improved the structural stability at higher voltages in a half-cell with a liquid electrolyte. The MS-LCO cathode exhibited a stable capacity of 163.1 mAh g-1 after 500 cycles at 0.5 C, and a high specific capacity of 166.8 mAh g-1 at 2 C. In addition, a solid lithium battery with the surface-passivated MS-LCO cathode and a polyethylene oxide (PEO)-based inorganic/organic composite electrolyte retained 85.8 % of its initial discharge capacity after 150 cycles at a charging cutoff voltage of 4.3 V. Thus, the introduction of a surface-passivating shell can effectively suppress the decomposition of PEO caused by highly reactive oxygen species in LiCoO2 at high voltages.

Implanting Transition Metal into Li2 O-Based Cathode Prelithiation Agent for High-Energy-Density and Long-Life Li-Ion Batteries

Compensating the irreversible loss of limited active lithium (Li) is essentially important for improving the energy-density and cycle-life of practical Li-ion battery full-cell, especially after employing high-capacity but low initial coulombic efficiency anode candidates. Introducing prelithiation agent can provide additional Li source for such compensation. Herein, we precisely implant trace Co (extracted from transition metal oxide) into the Li site of Li2 O, obtaining (Li0.66 Co0.11 □0.23 )2 O (CLO) cathode prelithiation agent. The synergistic formation of Li vacancies and Co-derived catalysis efficiently enhance the inherent conductivity and weaken the Li-O interaction of Li2 O, which facilitates its anionic oxidation to peroxo/superoxo species and gaseous O2 , achieving 1642.7 mAh/g~Li2O prelithiation capacity (≈980 mAh/g for prelithiation agent). Coupled 6.5 wt % CLO-based prelithiation agent with LiCoO2 cathode, substantial additional Li source stored within CLO is efficiently released to compensate the Li consumption on the SiO/C anode, achieving 270 Wh/kg pouch-type full-cell with 92 % capacity retention after 1000 cycles.

Protecting Li-metal in O2 atmosphere by a sacrificial polymer additive in Li-O2 batteries

Li-O2 batteries (LOBs) with Li-metal as the anode are characterized by their high theoretical energy density of 3500 W h kg-1 and are thus considered next-generation batteries with an unlimited potential. However, upon cycling in a harsh O2 atmosphere, the poor-quality solid electrolyte interphase (SEI) film formed on the surface of the Li-metal anode cannot effectively suppress the shuttle effect from O2, superoxide species, protons, and soluble side products. These issues lead to aggravated Li-metal corrosion and hinder the practical development of LOBs. In this work, a polyacrylamide-co-polymethyl acrylate (PAMMA) copolymer was innovatively introduced in an ether-based electrolyte as a sacrificial additive. PAMMA was found to preferentially decompose and promote the formation of a dense and Li3N-rich SEI film on the Li-metal surface, which could effectively prohibit the shuttle effect from a series of detrimental species in the Li-O2 cell during the discharge/charge process. Using PAMMA, well-protected Li-metal in a harsh O2 atmosphere and significantly enhanced cycling performance of the Li-O2 cell could be achieved. Thus, the use of a sacrificial polymer additive provides a promising strategy for the effective protection of Li-metal in Li-O2 cells in a severe O2 atmosphere during practical applications.

Solid Electrolyte Interphase Structure Regulated by Functional Electrolyte Additive for Enhancing Li Metal Anode Performance

Lithium (Li) metal anodes have become an important component of the next generation of high energy density batteries. However, the Li metal anode still has problems such as Li dendrite growth and unstable solid electrolyte interface layer. Herein, we present a functional electrolyte additive (PANHF) successfully synthesized from acrylonitrile and hexafluorobutyl methacrylate via a polymerization reaction. With extensive analytical characterization, it is found that the PANHF can improve the reversibility and Coulombic efficiency of the Li deposition/dissolution reaction and prevent the growth of Li dendrites by forming a solid electrolyte interphase rich in organic matter on the outer layer and LiF on the inner layer. The results show that the cycling performance of the Li/Li cell was greatly improved in the electrolyte containing 0.5 wt % PANHF. Specifically, the cycling stability of more than 700 cycles was achieved at a current density of 1.0 mA cm-2. Moreover, the Li/NCM811 cell with 0.5 wt % PANHF has a higher capacity of 137.7 mA h g-1 at 1.0 C and a capacity retention of 83.41% after 200 cycles. This work highlights the importance of protecting the Li metal anode with functional bipolymer additives for next-generation Li metal batteries.

Oxygen-Bridged Long-Range Dual Sites Boost Ethanol Electrooxidation by Facilitating C-C Bond Cleavage

Optimizing the interatomic distance of dual sites to realize C-C bond breaking of ethanol is critical for the commercialization of direct ethanol fuel cells. Herein, the concept of holding long-range dual sites is proposed to weaken the reaction barrier of C-C cleavage during the ethanol oxidation reaction (EOR). The obtained long-range Rh-O-Pt dual sites achieve a high current density of 7.43 mA/cm2 toward EOR, which is 13.3 times that of Pt/C, as well as remarkable stability. Electrochemical in situ Fourier transform infrared spectroscopy indicates that long-range Rh-O-Pt dual sites can increase the selectivity of C1 products and suppress the generation of a CO intermediate. Theoretical calculations further disclose that redistribution of the surface-localized electron around Rh-O-Pt can promote direct oxidation of -OH, accelerating C-C bond cleavage. This work provides a promising strategy for designing oxygen-bridged long-range dual sites to tune the activity and selectivity of complicated catalytic reactions.

Visualizing interfacial collective reaction behaviour of Li-S batteries

Benefiting from high energy density (2,600 Wh kg-1) and low cost, lithium-sulfur (Li-S) batteries are considered promising candidates for advanced energy-storage systems1-4. Despite tremendous efforts in suppressing the long-standing shuttle effect of lithium polysulfides5-7, understanding of the interfacial reactions of lithium polysulfides at the nanoscale remains elusive. This is mainly because of the limitations of in situ characterization tools in tracing the liquid-solid conversion of unstable lithium polysulfides at high temporal-spatial resolution8-10. There is an urgent need to understand the coupled phenomena inside Li-S batteries, specifically, the dynamic distribution, aggregation, deposition and dissolution of lithium polysulfides. Here, by using in situ liquid-cell electrochemical transmission electron microscopy, we directly visualized the transformation of lithium polysulfides over electrode surfaces at the atomic scale. Notably, an unexpected gathering-induced collective charge transfer of lithium polysulfides was captured on the nanocluster active-centre-immobilized surface. It further induced an instantaneous deposition of nonequilibrium Li2S nanocrystals from the dense liquid phase of lithium polysulfides. Without mediation of active centres, the reactions followed a classical single-molecule pathway, lithium polysulfides transforming into Li2S2 and Li2S step by step. Molecular dynamics simulations indicated that the long-range electrostatic interaction between active centres and lithium polysulfides promoted the formation of a dense phase consisting of Li+ and Sn2- (2 < n ≤ 6), and the collective charge transfer in the dense phase was further verified by ab initio molecular dynamics simulations. The collective interfacial reaction pathway unveils a new transformation mechanism and deepens the fundamental understanding of Li-S batteries.

From Li to Na: Exploratory Analysis of Fe-Based Phosphates Polyanion-Type Cathode Materials by Mn Substitution

Both LiFePO4 (LFP) and NaFePO4 (NFP) are phosphate polyanion-type cathode materials, which have received much attention due to their low cost and high theoretical capacity. Substitution of manganese (Mn) elements for LFP/NFP materials can improve the electrochemical properties, but the connection between local structural changes and electrochemical behaviors after Mn substitution is still not clear. This study not only achieves improvements in energy density of LFP and cyclic stability of NFP through Mn substitution, but also provides an in-depth analysis of the structural evolutions induced by the substitution. Among them, the substitution of Mn enables LiFe0.5 Mn0.5 PO4 to achieve a high energy density of 535.3 Wh kg-1 , while NaFe0.7 Mn0.3 PO4 exhibits outstanding cyclability with 89.6% capacity retention after 250 cycles. Specifically, Mn substitution broadens the ion-transport channels, improving the ion diffusion coefficient. Moreover, LiFe0.5 Mn0.5 PO4 maintains a more stable single-phase transition during the charge/discharge process. The transition of NaFe0.7 Mn0.3 PO4 to the amorphous phase is avoided, which can maintain structural stability and achieve better electrochemical performance. With systematic analysis, this research provides valuable guidance for the subsequent design of high-performance polyanion-type cathodes.

On-chip gas reaction nanolab for in situ TEM observation

The catalysis reaction mechanism at nano/atomic scale attracted intense attention in the past decades. However, most in situ characterization technologies can only reflect the average information of catalysts, which leads to the inability to characterize the dynamic changes of single nanostructures or active sites under operando conditions, and many micro-nanoscale reaction mechanisms are still unknown. The combination of in situ transmission electron microscopy (TEM) holder system with MEMS chips provides a solution for it, where the design and fabrication of MEMS chips are the key factors. Here, with the aid of finite element simulation, an ultra-stable heating chip was developed, which has an ultra-low thermal drift during temperature heating. Under ambient conditions within TEM, atomic resolution imaging was achieved during the heating process or at high temperature up to 1300 °C. Combined with the developed polymer membrane seal technique and nanofluidic control system, it can realize an adjustable pressure from 0.1 bar to 4 bar gas environment around the sample. By using the developed ultra-low drift gas reaction cells, the nanoparticle's structure evolution at atomic scale was identified during reaction.

Selective Conversion of Propane by Electrothermal Catalysis in Proton Exchange Membrane Fuel Cell

Electrochemical conversion of alkanes to high value-added oxygenated products under a mild condition is of significance. Herein, we effectively couple the electrocatalysis of H2 O2 with the thermo-catalysis of propane oxidation in the cathode of proton exchange membrane fuel cell. Specifically, H2 O2 is in-situ generated on the nitric acid-treated carbon black (C-acid) via 2e- process of oxygen reduction reaction, and then transports to the Fe active sites of MIL-53 (Al, Fe) metal-organic frameworks for propane oxidation. Based on this strategy, the space-time yield of C3 oxygenated products of propane oxidation reaches 2.65 μmol h-1  cm-2 , which represents a new benchmark for electrochemical alkane oxidation in the fuel-cell-type electrolyzer. This study highlights the importance of multifunctional composite catalysts in the field of electrosynthesis.

Ga-Modification Near-Surface Composition of Pt-Ga/C Catalyst Facilitates High-Efficiency Electrochemical Ethanol Oxidation through a C2 Intermediate

In electrochemical ethanol oxidation reactions (EOR) catalyzed by Pt metal nanoparticles through a C2 route, the dissociation of the C-C bond in the ethanol molecule can be a limiting factor. Complete EOR processes producing CO2 were always exemplified by the oxidative dehydrogenation of C1 intermediates, a reaction route with less energy utilization efficiency. Here, we report a Pt3Ga/C electrocatalyst with a uniform distribution of Ga over the nanoparticle surface for EOR that produces CO2 at medium potentials (>0.3 V vs SCE) efficiently through direct and sustainable oxidation of C2 intermediate species, i.e., acetaldehyde. We demonstrate the excellent performance of the Pt3Ga-200/C catalyst by using electrochemical in situ Fourier transform infrared reflection spectroscopy (FTIR) and an isotopic labeling method. The atomic interval structure between Pt and Ga makes the surface of nanoparticles nonensembled, avoiding the formation of poisonous *CHx and *CO species via bridge-type adsorption of ethanol molecules. Meanwhile, the electron redistribution from Ga to Pt diminishes the *O/*OH adsorption and CO poisoning on Pt atoms, exposing more available sites for interaction with the C2 intermediates. Furthermore, the dissociation of H2O into *OH is facilitated by the high hydrophilicity of Ga, which is supported by DFT calculations, promoting the deep oxidation of C2 intermediates. Our work represents an extremely rare EOR process that produces CO2 without observing kinetic limitations under medium potential conditions.

Observing ion diffusion and reciprocating hopping motion in water

When an ionic crystal dissolves in solvent, the positive and negative ions associated with solvent molecules release from the crystal. However, the existing form, interaction, and dynamics of ions in real solution are poorly understood because of the substantial experimental challenge. We observed the diffusion and aggregation of polyoxometalate (POM) ions in water by using liquid phase transmission electron microscopy. Real-time observation reveals an unexpected local reciprocating hopping motion of the ions in water, which may be caused by the short-range polymerized bridge of water molecules. We find that ion oligomers, existing as highly active clusters, undergo frequent splitting, aggregation, and rearrangement in dilute solution. The formation and dissociation of ion oligomers indicate a weak counterion-mediated interaction. Furthermore, POM ions with tetrahedral geometry show directional interaction compared with spherical ions, which presents structure-dependent dynamics.

Injecting Excess Na into a P2-Type Layered Oxide Cathode to Achieve Presodiation in a Na-Ion Full Cell

The initial Na loss limits the theoretical specific capacity of cathodes in Na-ion full cell applications, especially for Na-deficient P2-type cathodes. In this study, we propose a presodiation strategy for cathodes to compensate for the initial Na loss in Na-ion full cells, resulting in a higher specific capacity and a higher energy density. By employing an electrochemical presodiation approach, we inject 0.32 excess active Na into P2-type Na_0.67Li_0.1Fe_0.37Mn_0.53O₂ (NLFMO), aiming to compensate for the initial Na loss in hard carbon (HC) and the inherent Na deficiency of NLFMO. The structure of the NLFMO cathode converts from P2 to P'2 upon active Na injection, without affecting subsequent cycles. As a result, the HC||NLFMO_preNa full cell exhibits a specific capacity of 125 mAh/g, surpassing the value of 61 mAh/g of the HC||NLFMO full cell without presodiation due to the injected active Na. Moreover, the presodiation effect can be achieved through other engineering approaches (e.g., Na-metal contact), suggesting the scalability of this methodology.

Mechanism of Particle-Mediated Inhibition of Demetalation for Single-Atom Catalytic Sites in Acidic Electrochemical Environments

Demetalation, caused by the electrochemical dissolution of metal atoms, poses a significant challenge to the practical application of single-atom catalytic sites (SACSs) in proton exchange membrane-based energy technologies. One promising approach to inhibit SACS demetalation is the use of metallic particles to interact with SACSs. However, the mechanism underlying this stabilization remains unclear. In this study, we propose and validate a unified mechanism by which metal particles can inhibit the demetalation of Fe SACSs. Metal particles act as electron donors, decreasing the Fe oxidation state by increasing the electron density at the FeN₄ position, thereby strengthening the Fe-N bond, and inhibiting electrochemical Fe dissolution. Different types, forms, and contents of metal particles increase the Fe-N bond strength to varying extents. A linear correlation between the Fe oxidation state, Fe-N bond strength, and electrochemical Fe dissolution amount supports this mechanism. Our screening of a particle-assisted Fe SACS led to a 78% reduction in Fe dissolution, enabling continuous operation for up to 430 h in a fuel cell. These findings contribute to the development of stable SACSs for energy applications.

Electric double layer contribution to sum frequency generation signal from Au electrode

Understanding the electric double layer (EDL) of the metal electrode-electrolyte interface is essential to electrochemistry and relevant disciplines. In this study, potential-dependent electrode Sum Frequency Generation (SFG) intensities of polycrystalline gold electrodes in HClO4 and H2SO4 electrolytes were thoroughly analyzed. The potential of zero charges (PZC) of the electrodes was -0.06 and 0.38 V in HClO4 and H2SO4, respectively, determined from differential capacity curves. Without specific adsorption, the total SFG intensity was dominated by the contribution from the Au surface and increased similar to that of the visible (VIS) wavelength scanning, which pushed the SFG process closer to the double resonant condition in HClO4. However, the EDL contributed about 30% SFG signal with specific adsorption in H2SO4. Below PZC, the total SFG intensity was dominated by the Au surface contribution and increased with potential at a similar slope in these two electrolytes. Around PZC, as the EDL structure became less ordered and the electric field changed direction, there would be no EDL SFG contribution. Above PZC, the total SFG intensity increased much more rapidly with potential in H2SO4 than in HClO4, which suggested that the EDL SFG contribution kept increasing with more specific adsorbed surface ions from H2SO4.

On-Site Cross-Linking of Polyacrylamide to Efficiently Bind the Silicon Anode of Lithium-Ion Batteries

Silicon anode suffers from rapid capacity decay because of its irreversible volume changes during charging and discharging. As one of the important components of the electrode structure, the binder plays an irreplaceable role in buffering the volume changes of the silicon anode and ensuring close contact between various components of the electrode. Traditional PVDF binder is based on weak van der Waals forces and cannot effectively buffer the stress coming from silicon volume expansion, resulting in rapid decay of silicon anode capacity. In addition, most natural polysaccharide binders with a single force face the same problem due to poor toughness. Therefore, it is extremely important to develop a binder with good force and toughness between the silicon particles. Herein, polyacrylamide (PAM) polymer chains that are premixed homogeneously with various components are cross-linked on-site on the current collector via the condensation reaction with citric acid, forming a polar three-dimensional (3D) network with improved tensile properties and adhesion for both silicon particles and current collector. The silicon anode with the cross-linked PAM binder exhibits higher reversible capacity and enhanced long-term cycling stability; the capacity remains at 1280 mA h g^-1 after 600 cycles at 2.1 A g^-1 and 770.9 mA h g^-1 after being subjected to 700 cycles at 4.2 A g^-1. It also exhibits excellent cycle stability in silicon-carbon composite materials. This study provides a cost-effective binder engineering strategy, which significantly enhances the long-term cycle performance and stability of silicon anodes, paving the way for large-scale practical applications.

Full-Dimensional Analysis of Electrolyte Decomposition on Cathode-Electrolyte Interface: Establishing Characterization Paradigm on LiNi0.6Co0.2Mn0.2O2 Cathode with Potential Dependence

Cathode electrolyte interphase (CEI) layers derived from electrolyte oxidative decomposition can passivate the cathode surface and prevent its direct contact with electrolyte. The inorganics-dominated inner solid electrolyte layer (SEL) and organics-rich outer quasi-solid-electrolyte layer (qSEL) constitute the CEI layer, and both merge at the junction without a clear boundary, which assures the CEI layer with both ionic-conducting and electron-blocking properties. However, the typical "wash-then-test" pattern of characterizations aiming at the microstructure of CEI layers would dissolve the qSEL and even destroy the SEL, leading to an overanalysis of electrolyte decomposition pathway and misassignment of CEI architecture (e.g., component and morphology). In this study, we established a full-dimensional characterization paradigm (combining Fourier transform infrared, solution NMR, X-ray photoelectron spectroscopy, and mass spectrometry technologies) and reconstructed the original CEI layer model. Besides, the feasibility of this characterization paradigm has been verified in a wide operating voltage range on a typical LiNi_xMn_yCo_zO₂ cathode.

Unveiling Atom Migration Abilities Affected Anode Performance of Sodium-Ion Batteries

In sodium-ion batteries (SIBs), the low initial coulombic efficiency (ICE) is commonly induced by irreversible phase conversion and difficult desodiation, especially on transition metal compounds (TMCs). Yet the underlying physicochemical mechanism of poor reaction reversibility is still a controversial issue. Herein, by using in situ transmission electron microscope and in situ X-ray diffraction, we demonstrate the irreversible conversion of NiCoP@C is caused by the rapid migration of P in carbon layer and preferential formation of isolated Na3P during discharge. By modifying the carbon coating layer, the migration of Ni/Co/P atoms is inhibited, thus the improvement of ICE and cycle stability is realized. The inhibiting of fast atom migration which induces component separation and rapid performance degradation might be applied to a wide range of electrode materials, and guides the development of advanced SIBs.

Real-time imaging of sulfhydryl single-stranded DNA aggregation

The structure and functionality of biomacromolecules are often regulated by chemical bonds, however, the regulation process and underlying mechanisms have not been well understood. Here, by using in situ liquid-phase transmission electron microscopy (LP-TEM), we explored the function of disulfide bonds during the self-assembly and structural evolution of sulfhydryl single-stranded DNA (SH-ssDNA). Sulfhydryl groups could induce self-assembly of SH-ssDNA into circular DNA containing disulfide bonds (SS-cirDNA). In addition, the disulfide bond interaction triggered the aggregation of two SS-cirDNA macromolecules along with significant structural changes. This visualization strategy provided structure information at nanometer resolution in real time and space, which could benefit future biomacromolecules research.

Quantifying the Influence of Li Plating on a Graphite Anode by Mass Spectrometry

The prominent problem with graphite anodes in practical applications is the detrimental Li plating, resulting in rapid capacity fade and safety hazards. Herein, secondary gas evolution behavior during the Li-plating process was monitored by online electrochemical mass spectrometry (OEMS), and the onset of local microscale Li plating on the graphite anode was precisely/explicitly detected in situ/operando for early safety warnings. The distribution of irreversible capacity loss (e.g., primary and secondary solid electrolyte interface (SEI), dead Li, etc.) under Li-plating conditions was accurately quantified by titration mass spectroscopy (TMS). Based on OEMS/TMS results, the effect of typical VC/FEC additives was recognized at the level of Li plating. The nature of vinylene carbonate (VC)/fluoroethylene carbonate (FEC) additive modification is to enhance the elasticity of primary and secondary SEI by adjusting organic carbonates and/or LiF components, leading to less "dead Li" capacity loss. Though VC-containing electrolyte greatly suppresses the H₂/C₂H₄ (flammable/explosive) evolution during Li plating, more H₂ is released from the reductive decomposition of FEC.

Role of Substitution Elements in Enhancing the Structural Stability of Li-Rich Layered Cathodes

Element doping/substitution has been recognized as an effective strategy to enhance the structural stability of layered cathodes. However, abundant substitution studies not only lack a clear identification of the substitution sites in the material lattice, but the rigid interpretation of the transition metal (TM)-O covalent theory is also not sufficiently convincing, resulting in the doping/substitution proposals being dragged into design blindness. In this work, taking Li_1.2Ni_0.2Mn_0.6O₂ as a prototype, the intense correlation between the "disordered degree" (Li/Ni mixing) and interface-structure stability (e.g., TM-O environment, slab/lattice, and Li⁺ reversibility) is revealed. Specifically, the degree of disorder induced by the Mg/Ti substitution extends in the opposite direction, conducive to sharp differences in the stability of TM-O, Li⁺ diffusion, and anion redox reversibility, delivering fairly distinct electrochemical performance. Based on the established paradigm of systematic characterization/analysis, the "degree of disorder" has been shown to be a powerful indicator of material modification by element substitution/doping.

Interphase Engineering for Stabilizing Ni-Rich Cathode in Lithium-Ion Batteries by a Nucleophilic Reaction-Based Additive

Ni-rich cathode materials are considered promising candidates for next-generation lithium-ion batteries because of their high energy density and low cost. However, interphase failure at the surface of Ni-rich cathodes negatively impacts cycling performance, making it challenging to meet the requirements of long-term applications. In this study, a strategy is developed to improve interphase properties through introduction of a nucleophilic reaction-based additive, using an appropriate amount of the inducer lithium isopropoxide (LIP) in the commercial electrolyte to achieve long-term cycling stability of Li||LiNi_0.83 Co_0.11 Mn_0.06 O₂ (NCM83) cells. This strategy enables Li||NCM83 cells to maintain a capacity of 148.7 mAh g^-1 with a retention of 83.3 % even after 500 cycles. This outstanding cycling stability is attributed to a robust cathode-electrolyte interphase (CEI) constructed on NCM83 surface LIP-induce ring-opening polymerization of ethylene carbonate (EC). As a result, the organic-inorganic components of the CEI effectively constrain gas evolution and the corresponding phase transformation behavior. Furthermore, the CEI also suppresses microcrack formation and eventually sustains the Ni valence and coordination environment at high voltage.

Mechanism of Cations Suppressing Proton Diffusion Kinetics for Electrocatalysis

Proton transfer is crucial for electrocatalysis. Accumulating cations at electrochemical interfaces can alter the proton transfer rate and then tune electrocatalytic performance. However, the mechanism for regulating proton transfer remains ambiguous. Here, we quantify the cation effect on proton diffusion in solution by hydrogen evolution on microelectrodes, revealing the rate can be suppressed by more than 10 times. Different from the prevalent opinions that proton transport is slowed down by modified electric field, we found water structure imposes a more evident effect on kinetics. FTIR test and path integral molecular dynamics simulation indicate that proton prefers to wander within the hydration shell of cations rather than to hop rapidly along water wires. Low connectivity of water networks disrupted by cations corrupts the fast-moving path in bulk water. This study highlights the promising way for regulating proton kinetics via a modified water structure.

Prolonged lifespan of initial-anode-free lithium-metal battery by pre-lithiation in Li-rich Li2Ni0.5Mn1.5O4 spinel cathode

Anode-free lithium metal batteries (AF-LMBs) can deliver the maximum energy density. However, achieving AF-LMBs with a long lifespan remains challenging because of the poor reversibility of Li⁺ plating/stripping on the anode. Here, coupled with a fluorine-containing electrolyte, we introduce a cathode pre-lithiation strategy to extend the lifespan of AF-LMBs. The AF-LMB is constructed with Li-rich Li₂Ni_0.5Mn_1.5O₄ cathodes as a Li-ion extender; the Li₂Ni_0.5Mn_1.5O₄ can deliver a large amount of Li⁺ in the initial charging process to offset the continuous Li⁺ consumption, which benefits the cycling performance without sacrificing energy density. Moreover, the cathode pre-lithiation design has been practically and precisely regulated using engineering methods (Li-metal contact and pre-lithiation Li-biphenyl immersion). Benefiting from the highly reversible Li metal on the Cu anode and Li₂Ni_0.5Mn_1.5O₄ cathode, the further fabricated anode-free pouch cells achieve 350 W h kg^-1 energy density and 97% capacity retention after 50 cycles.

Reliable impedance analysis of Li-ion battery half-cell by standardization on electrochemical impedance spectroscopy (EIS)

Electrochemical impedance spectroscopy (EIS) is a powerful characterization technique for the in-depth investigation of kinetic/transport parameters detection, reaction mechanism understanding, and degradation effects exploration in lithium-ion battery (LIB) systems. However, due to the lack of standardized criterion/paradigm, severe misinterpretations occur frequently during an EIS measurement. In this paper, the significance of instrumental accuracy is described and the character/principle of selection on the simulation model is illuminated/proposed, showing that an adequate precision device and an appropriate fitting model are a prerequisite for a correct EIS analysis. Moreover, the drawbacks of conventional two-electrode EIS experiments for typical coin-type cells are rigorously pointed out by comparison with the ideal three-electrode configuration, where the real impedance information of the cathode would be masked by the sum of both the anode film resistance response and the unavoidable inductive loop signal. The three-electrode case enables efficient accurate observations on individual electrodes, thus facilitating abundant and useful information acquisition. Consequently, devices with a sufficient accuracy, rational simulation models, and advanced three-electrode cells are distinctly illustrated as standardized criterion/paradigm for EIS characterizations, which are essentially important for electrode and interface modifications in LIBs.

Titration Mass Spectroscopy (TMS): A Quantitative Analytical Technology for Rechargeable Batteries

Development of high-energy-density rechargeable battery systems not only needs advanced qualitative characterizations for mechanism exploration but also requires accurate quantification technology to quantitatively elucidate products and fairly assess numerous modification strategies. Herein, as a reliable quantification technology, titration mass spectroscopy (TMS) is developed to accurately quantify O-related anionic redox reactions (Li-O₂ battery and nickel-cobalt-manganese (NCM)/Li-rich cathodes), parasitic carbonate deposition and decomposition (derived from air-exposure degradation and electrolyte oxidation), and dead Li⁰ formation (Li-metal battery and over-discharged graphite anode). TMS technology can harvest key information on products (e.g., quantification of oxidized lattice oxygen and solid electrolyte interphase (SEI)/cathode electrolyte interphase (CEI) components) and guide corresponding design strategy by enhancing understanding of the mechanism (e.g., clearly distinguish the catalytic target of highly oxidative Ni⁴⁺ on the NCM cathode). Not limited as a rigid quantification tool for widely known products/mechanisms, TMS technology has been demonstrated as a powerful and versatile tool for the investigations of advanced batteries.

Liquid cell electrochemical TEM: Unveiling the real-time interfacial reactions of advanced Li-metal batteries

Li metal batteries (LMBs) reveal great application prospect in next-generation energy storage, because of their high energy density and low electrochemical potential, especially when paired with elemental sulfur and oxygen cathodes. Complex interfacial reactions have long been a big concern because of the elusive formation/dissolution of Li metal at the solid-electrolyte interface (SEI) layer, which leads to battery degradation under practical operating conditions. To precisely track the reactions at the electrode/electrolyte interfaces, in the past ten years, high spatio-temporal resolution, in situ electrochemical transmission electron microscopy (EC-TEM) has been developed. A preliminary understanding of the structural and chemical variation of Li metal during nucleation/growth and SEI layer formation has been obtained. In this perspective, we give a brief introduction of liquid cell development. Then, we comparably discuss the different configurations of EC-TEM based on open-cell and liquid-cell, and focus on the recent advances of liquid-cell EC-TEM and its investigation in the electrodes, electrolytes, and SEI. Finally, we present a perspective of liquid-cell EC-TEM for future LMB research.

Highly Dispersed Ru-Co Nanoparticles Interfaced With Nitrogen-Doped Carbon Polyhedron for High Efficiency Reversible Li-O2 Battery

The lithium-oxygen (Li-O₂ ) battery with high energy density of 3860 Wh kg^-1 represents one of the most promising new secondary batteries for future electric vehicles and mobile electronic devices. However, slow oxygen reduction/oxygen evolution (ORR/OER) reaction efficiency and unstable cycling performance restrain the practical applications of the Li-O₂ battery. Herein, Ru-modified nitrogen-doped porous carbon-encapsulated Co nanoparticles (Ru/Co@CoN_x -C) are synthesized through reduction of Ru on metal-organic framework (MOFs) pyrolyzed derivatives strategies. Porous carbon polyhedra provide channels for reactive species and stable structure ensures the cyclic stability of the catalyst; abundant Co-N_x sites and high specific surface area (353 m² g^-1 ) provide more catalytically active sites and deposition sites for reaction products. Theoretical calculations further verify that Ru/Co@CoN_x -C can regulate the growth of Li₂ O₂ to improve reversibility of Li-O₂ batteries. Li-O₂ batteries with Ru/Co@CoN_x -C as cathode catalyst achieve small voltage gaps of 1.08 V, exhibit excellent cycle stability (205 cycles), and deliver high discharge specific capacity (17050 mAh g^-1 ). Furthermore, pouch-type Li-O₂ batteries that maintain stable electrochemical performance output even under conditions of bending deformation and corner cutting are successfully assembled. This study demonstrates Ru/Co@CoN_x -C catalyst's great application potential in Li-O₂ batteries.

Identification of the active triple-phase boundary of a non-Pt catalyst layer in fuel cells

The rational design of non-Pt oxygen reduction reaction (ORR) catalysts and catalyst layers in fuel cells is largely impeded by insufficient knowledge of triple-phase boundaries (TPBs) in the micropore and mesopore ranges. Here, we developed a size-sensitive molecular probe method to resolve the TPB of Fe/N/C catalyst layers in these size ranges. More than 70% of the ORR activity was found to be contributed by the 0.8- to 2.0-nanometer micropores of Fe/N/C catalysts, even at a low micropore area fraction of 29%. Acid-alkaline interactions at the catalyst-polyelectrolyte interface deactivate the active sites in mesopores and macropores, resulting in inactive TPBs, leaving micropores without the interaction as the active TPBs. The concept of active and inactive TPBs provides a previously unidentified design principle for non-Pt catalyst and catalyst layers in fuel cells.

In Situ TEM Observation of Stagnant Liquid Layer Activation in Nanochannel

The kinetics of mass transfer in a stagnant fluid layer next to an interface govern numerous dynamic reactions in diffusional micro/nanopores, such as catalysis, fuel cells, and chemical separation. However, the effect of the interplay between stagnant liquid and flowing fluid on the micro/nanoscopic mass transfer dynamics remains poorly understood. Here, by using liquid cell transmission electron microscopy (TEM), we directly tracked microfluid unit migration at the nanoscale. By tracking the trajectories, an unexpected mass transfer phenomenon in which fluid units in the stagnant liquid layer migrated two orders faster during gas-liquid interface updating was identified. Molecular dynamics (MD) simulations indicated that the chemical potential difference between nanoscale liquid layers led to convective flow, which greatly enhanced mass transfer on the surface. Our study opens up a pathway toward research on mass transfer in the surface liquid layers at high spatial and temporal resolutions.

Insights into Electrochemical Processes of Hollow Octahedral Co3Se4@rGO for High-Rate Sodium Ion Storage

Sodium ion batteries (SIBs), as an alternative and promising energy storage system, have attracted considerable attention due to the abundant reserves and low cost of sodium. However, it remains a great challenge to achieve high capacity and rate capability required for practical applications. Herein, hollow octahedral Co₃Se₄ particles encapsulated in reduced graphene oxide (Co₃Se₄@rGO) were designed and synthesized and exhibited excellent electrochemical performances as anodes of SIBs, especially rate capability. Sodiation/desodiation processes and involved mechanisms were investigated by using in situ TEM and in situ XRD. During sodiation, a crystalline Na₂Se layer with numerous amorphous fine Co nanoparticles dispersed on it was observed to appear on the surface of the original Co₃Se₄@rGO particles, and the movable Co-Na₂Se composites further migrated to the rGO network with high electron/ion dual conductivity, resulting in ultrafast sodium storage kinetics and remarkable rate performance of the Co₃Se₄@rGO anode evidenced by delivering a discharge capacity of 229.3 mAh g^-1 at a large current density of 50 A g^-1. Our findings reveal the fundamental mechanism behind the enhanced performance of the Co₃Se₄@rGO anode and offer valuable insights into the rational design of electrode materials for high-performance SIBs.

General Carbon-Supporting Strategy to Boost the Oxygen Reduction Activity of Zeolitic-Imidazolate-Framework-Derived Fe/N/Carbon Catalysts in Proton Exchange Membrane Fuel Cells

The oxygen reduction reaction (ORR) activity of the Fe/N/Carbon catalysts derived from the pyrolysis of zeolitic-imidazolate-framework-8 (ZIF-8) has been still lower than that of commercial Pt-based catalysts utilized in the proton exchange membrane fuel cells (PEMFCs) due to low density of accessible active sites. In this study, an efficient carbon-supporting strategy is developed to enhance the ORR efficiency of the ZIF-derived Fe/N/Carbon catalysts by increasing the accessible active site density. The enhancement lies in (i) improving the accessibility of active sites via converting dodecahedral particles to graphene-like layered materials and (ii) enhancing the density of FeN_x active sites via suppressing the formation of nanoparticles as well as providing extra spaces to host active sites. The optimized and efficient Fe/N/Carbon catalyst shows a half-wave potential (E_1/2) of 0.834 V versus reversible hydrogen electrode in acidic media and produces a peak power density of 0.66 W cm^-2 in an air-fed PEMFC at 2 bar backpressure, outperforming most previously reported Pt-free ORR catalysts. Finally, the general applicability of the carbon-supporting strategy is confirmed using five different commercial carbon blacks. This work provides an effective route to derive Fe/N/Carbon catalysts exhibiting a higher power density in PEMFCs.

Copper Substitution in P2-Type Sodium Layered Oxide To Mitigate Phase Transition and Enhance Cyclability of Sodium-Ion Batteries

Development of high-performance cathode materials is one of the key challenges in the practical application of sodium-ion batteries. Among all the cathode materials, layered sodium transition-metal oxides are particularly attractive. However, undesired phase transitions are often reported and have detrimental effects on the structure stability and electrochemical performance. Cu substitution of zinc in the P2-type Na_0.6Mn_0.7Ni_0.15Zn_0.15-xCu_xO₂ (x = 0, 0.075, and 0.15) composites was investigated in this study for mitigating the biphase transition and enhancing the electrochemical performance of sodium-ion batteries. The coupling effect of Zn and Cu enables an excellent capacity retention of 96.4% of the initial discharge capacity after 150 cycles at 0.1 C in the Na/Na_0.6Mn_0.7Ni_0.15Zn_0.075Cu_0.075O₂ cell. The biphase transition that occurred in the high voltage range has been significantly suppressed after the incorporation of Cu in Na_0.6Mn_0.7Ni_0.15Zn_0.15O₂, which was confirmed by in situ X-ray diffraction studies. Moreover, the substitution of the inert element Zn with electrochemically active Cu leads to the suppression of anionic redox and the occurrence of Cu^2+/3+ redox reaction, and the electrolyte decomposition is impeded after the introduction of electrochemically active Cu in the Na_0.6Mn_0.7Ni_0.15Zn_0.15-xCu_xO₂ composite cathode. The enhanced electrochemical performance in the Na_0.6Mn_0.7Ni_0.15Zn_0.075Cu_0.075O₂ electrode can be ascribed to the coexistence of Zn and Cu and alleviated volumetric change as well as suppressed electrode/electrolyte side reaction after Cu substitution.

Identification of a quasi-liquid phase at solid-liquid interface

An understanding of solid–liquid interfaces is of great importance for fundamental research as well as industrial applications. However, it has been very challenging to directly image solid–liquid interfaces with high resolution, thus their structure and properties are often unknown. Here, we report a quasi-liquid phase between metal (In, Sn) nanoparticle surfaces and an aqueous solution observed using liquid cell transmission electron microscopy. Our real-time high-resolution imaging reveals a thin layer of liquid-like materials at the interfaces with the frequent appearance of small In nanoclusters. Such a quasi-liquid phase serves as an intermediate for the mass transport from the metal nanoparticle to the liquid. Density functional theory-molecular dynamics simulations demonstrate that the positive charges of In ions greatly contribute to the stabilization of the quasi-liquid phase on the metal surface.

Solid–liquid interfaces are ubiquitous in natural and technological processes, but their imaging at the atomic scale has been challenging. The authors, using liquid-phase transmission electron microscopy, identify a quasi-liquid phase and the mass transport between the surface of In and Sn nanocrystals and an aqueous solution.

Stabilizing Li-O2 Batteries with Multifunctional Fluorinated Graphene

As a full cell system with attractive theoretical energy density, challenges faced by Li-O₂ batteries (LOBs) are not only the deficient actual capacity and superoxide-derived parasitic reactions on the cathode side but also the stability of Li-metal anode. To solve simultaneously intrinsic issues, multifunctional fluorinated graphene (CF_x, x = 1, F-Gr) was introduced into the ether-based electrolyte of LOBs. F-Gr can accelerate O₂^- transformation and O₂^--participated oxygen reduction reaction (ORR) process, resulting in enhanced discharge capacity and restrained O₂^--derived side reactions of LOBs, respectively. Moreover, F-Gr induced the F-rich and O-depleted solid electrolyte interphase (SEI) film formation, which have improved Li-metal stability. Therefore, energy storage capacity, efficiency, and cyclability of LOBs have been markedly enhanced. More importantly, the method developed in this work to disperse F-Gr into an ether-based electrolyte for improving LOBs' performances is convenient and significant from both scientific and engineering aspects.

Entropy and crystal-facet modulation of P2-type layered cathodes for long-lasting sodium-based batteries

P2-type sodium manganese-rich layered oxides are promising cathode candidates for sodium-based batteries because of their appealing cost-effective and capacity features. However, the structural distortion and cationic rearrangement induced by irreversible phase transition and anionic redox reaction at high cell voltage (i.e., >4.0 V) cause sluggish Na-ion kinetics and severe capacity decay. To circumvent these issues, here, we report a strategy to develop P2-type layered cathodes via configurational entropy and ion-diffusion structural tuning. In situ synchrotron X-ray diffraction combined with electrochemical kinetic tests and microstructural characterizations reveal that the entropy-tuned Na_0.62Mn_0.67Ni_0.23Cu_0.05Mg_0.07Ti_0.01O₂ (CuMgTi-571) cathode possesses more {010} active facet, improved structural and thermal stability and faster anionic redox kinetics compared to Na_0.62Mn_0.67Ni_0.37O₂. When tested in combination with a Na metal anode and a non-aqueous NaClO₄-based electrolyte solution in coin cell configuration, the CuMgTi-571-based positive electrode enables an 87% capacity retention after 500 cycles at 120 mA g⁻¹ and about 75% capacity retention after 2000 cycles at 1.2 A g⁻¹.

The use of Mn-rich layered cathodes in Na-based batteries is hindered by inadequate cycling reversibility and sluggish anionic redox kinetics. Here, the authors report a strategy to stabilize the structure and promote anionic redox via configurational entropy and ion-diffusion structural tuning.