A Selective and Ratiometric Bifunctional Fluorescent Probe for Al3+ Ion and Proton

A trans-Ferulic acid based fluorescence "turn-on" chemosensor for aluminum (III) ions in live cells and environmental samples

This study introduces a novel fluorescence 'turn-on' chemosensor, FHDA, based on a trans-Ferulic acid Schiff-base derivative. FHDA stands out as a highly selective and sensitive tool for the fluorescent detection of Al3+ with the fluorescence 'turn-on' effect. FHDA exhibits a strong CHEF effect and ICT upon complexation with Al3+ in a 1:2 binding stoichiometry. The significant Stokes shift (Δλ = 108 nm, λex = 422 nm, λem = 530 nm), large binding constant (Ka = 4.2 × 104 M-1), ∼9.5-fold increase in the quantum yield (FHDA, Φ = 0.020; FHDA-Al3+ complex, Φ = 0.189), and a LOD of 134 nM, makes FHDA an excellent chemosensor for detecting Al3+ in solution; tests in live cells and environmental samples also showed excellent responses. FHDA offers substantial improvements over existing methods with its ease of use, limited expense, high specificity, and the ability to provide real-time, in-situ monitoring of Al3+ ions. The utility of FHDA is highlighted through applications in monitoring Al3+ ions in e.g. lung cancer cells (A549) and environmental water samples. We believe that applications of FHDA can potentially lead to a novel diagnostic and therapeutic strategy against diseases linked to aluminum dysregulation.

Fluorimetric methods for determination of aluminum in water resources utilizing newly synthesized N,N'-bis(2,5-dihydroxybenzylidene)-4,4'-diamino diphenyl ether

Industrial waste contaimnation of water sources is a serious environmental problem. As a result, it's critical to identify metallic contamination in water with precision, sensitivity, and accuracy. In acetonitrile, the fluorimetric parameters of N,N-'bis(2,5-dihydroxybenzylidene)-4,4'-diamino diphenyl ether (DHDPE) and aluminum complex were determined. In the acetonitrile medium, the best fluorescence intensity of the DHDPE-Al complex was observed at λex = 280 nm, λem = 391 nm (excitation and emission wavelengths). For optimum complex formation, the ideal pH, duration, and temperature were 4.5, 20 min, and 25 °C, respectively. Within the ranges of 0.027-0.27 and 0.27-2.70 ppm aluminum concentrations, [Al3+]-F.I. Calibration graphs were linear. The fluorimetric aluminum measurement method was applied to diverse water sources using the newly synthesized macro molecular Schiff base DHDPE as the ligand. The aluminum concentration in water inflow to KOSKI (Konya Water and Sewerage Administration) was doubled as a result of the examination when compared to other samples of water.

An Indole-based Chromofluorogenic Probe for Detection of Trivalent Al3+, Ga3+, In3+ and Fe3+ Ions

An easily synthesizable indole-derived chromofluorogenic probe InNS has been demonstrated for recognition of trivalent metal ions (i. e., Al3+, Ga3+, In3+ and Fe3+). Both UV-Vis and emission spectral studies have been employed to assess the cation sensing ability of InNS in semi-aqueous medium. This probe exhibited a chromogenic response for these metal ions, and the related change was accompanied with the appearance of a new absorption near 376 nm. An obvious color change from pale yellow to dark yellow could also be noticed upon addition of the aforementioned metal ions to the probe's solution. Distinctively from the UV-Vis analysis, the fluorescence behavior of InNS was completely different; it displayed a 'turn-on' fluorescence response for only Al3+ among all the studied cations. The detection limit and the association constant (Ka) for Al3+ were determined to be 12.5 nM and 6.85×106 M-1, respectively. A potential 1 : 1 binding mode of Al3+-InNS has been established based on Job's plot, 1H NMR and DFT analyses. The reversibility experiment was conducted using strongly chelating EDTA ion, and a corresponding logic gate has been devised. In terms of practical applications, the InNS has been utilized to detect Al3+ in human breast carcinoma (MCF-7) cell lines displaying promising 'turn-on' bioimaging experiments.

Synthesis of a super-low detection limit fluorescent probe for Al3+ and its application in fluorescence imaging of zebrafish and cells

A novel fluorescent probe N'-(2-hydroxybenzylidene)-indole-3-formylhydrazine (JHK) was designed and synthesized based on the condensation reaction of indole-3-formylhydrazine and salicylaldehyde. The probe JHK solution could highly selectively recognize Al3+ by the obvious fluorescence enhancement (288-fold) after adding Al3+. And the probe solution with Al3+ had a very high fluorescence quantum yield (89.29 %). The detection limit was calculated to be 1.135 nM, which was significantly lower than many reported detection limits, indicating that the probe JHK had pretty good sensitivity. The ratio of JHK to Al3+ (1:1) and the sensing mechanism were determined by Job's plot, 1H NMR spectra, FTIR spectra, ESI-MS and Gaussian calculation. The probe solution and medium-speed filter paper were successfully used to make test papers for more convenient detection of Al3+. Furthermore, the probe JHK had been successfully applied to the detection of Al3+ in real water, zebrafish and living cells.

Turn-on detection of Al3+ and Zn2+ ions by a NSN donor probe: reversibility, logic gates and DFT calculations

An efficient dual functional naphthalene-derived Schiff base NpSb probe has been synthesised and evaluated for its fluorescence and chromogenic response towards metal ions. The NpSb probe was capable of selectively recognising Al3+ and Zn2+ ions when they were excited at the same wavelength in an aqueous organic solvent system. Almost non-fluorescent NpSb displayed a 'turn-on' fluorescence response when treated with Zn2+ (λem = 416 nm) and Al3+ (λem = 469 nm) ions due to the chelation-enhanced fluorescence (CHEF) effect. The limit of detection (LoD) values for Al3+ and Zn2+ have been determined to be 38.0 nM and 43.0 nM, respectively. The binding constants for Al3+ and Zn2+ were found to be 1.18 × 106 M-1 and 3.5 × 105 M-1, respectively. The NpSb also acted as a colorimetric sensor for Al3+ as the colour of the probe's solution turned to pale green from colourless upon Al3+ addition. The binding mechanism between NpSb and Zn2+/Al3+ was supported by the ESI-MS, Job's plot, NMR, and DFT studies. The reversibility experiments were carried out with an F- ion and EDTA with the development of corresponding logic gates. Moreover, NpSb could be applied to detect Al3+ ions in real samples such as tap water, distilled water and soil samples.

A new turn on coumarin-based fluorescence probe for Cr3+ detection in aqueous solution

Isatin-3-(7'-Methoxychromone-3'-methylidene) hydrazone (L) was synthesized based on chromone schiff base, and used to construct a novel sensor to detect Cr3+. Fluorescence detection experiments were carried out for a range of different concentrations of Cr3+ in aqueous solutions. A concentration calculation model was built on the basis of eliminating interference of excitation spectrum in the fluorescence spectra with mathematical method. Results showed that probe L displayed a 70-fold fluorescence enhancement upon the addition of Cr3+ due to the photo-induced electron transfer (PET) effect. On the other hand, metal ions except Cr3+ did not cause significant change in either the absorption or the fluorescence spectrum of L. In addition, L showed a good selectivity to Cr3+ over other metal cations, especially Al3+ and Cu2+. The probe L can detect Cr3+ highly and selectively by the direct chelation enhanced fluorescence with a detection limit of 3.14 × 10-6 M. Furthermore, benefiting from their good water solubility and biocompatibility, cell imaging and real-time monitoring of Cr3+ in living HepG2 cells were successfully achieved.

Fluorescent deactivation behaviors based on ESIPT and TICT of novel double target fluorescent probe and its sensing mechanism for Al3+/Mg2+: A TD-DFT study

Based on density functional theory (DFT) and time-dependent DFT (TD-DFT) methods with integral equation formula polarized continuum model (IEFPCM), the fluorescent behavior and recognizing mechanism of probe N'-((1-hydroxynaphthalen-2-yl)methylene)isoquinoline-3-carbohydrazide (NHMI) for Al³⁺/Mg²⁺ ion were investigated in more detail. Excited state intramolecular proton transfer (ESIPT) process in probe NHMI occurs in the stepwise pattern. The proton H₅ of enol structure (E1) firstly moves from O₄ to N₆ to form single proton-transfer (SPT2) structure, and then the proton H₂ of SPT2 transfers from N₁ to N₃ to form the stable double proton-transfer (DPT) structure. Subsequently, the transformation from DPT to its isomer (DPT1) induces the twisted intramolecular charge transfer (TICT) process. Two non-emissive TICT states (TICT1 and TICT2) were obtained, and TICT2 state quenches the fluorescence observed in the experiment. With the addition of aluminum (Al³⁺) or magnesium (Mg²⁺) ion, TICT process is prohibited by the coordination interaction between NHMI and Al³⁺/Mg²⁺, and the strong fluorescent signal is turned on. For probe NHMI, the twisted C-N single bond of acylhydrazone part leads to the TICT state. This sensing mechanism may inspire researchers to develop new probes from a different direction.

"Lighting up" fluorescence precise recognition of Al3+ with an effective fluorescence detection using a Bisphenol A-based sensor

Although aluminum is a ubiquitous metal in the ecosystem and has numerous critical roles in both the medicinal and biological fields, human daily life is seriously threatened by its assorted harmful influences. By this virtue, tracking the amount of aluminum byrapid sensitive and selective recognition methodologies is of great importance. Based on this, a novel fluorescent chemosensor 4,4'-(propane-2,2-diyl)bis(2-(((-2-hydroxybenzylidene) hydrazineylidene)-methyl)phenol) (BFASA) capable of recognizing Al³⁺ in a medium was constructed via an easy Schiff-base reaction between bisphenol A-containing molecule and the salicylaldehyde. The metal-binding studies of BFASA indicated a drastically enhanced emission with color alteration from colorless to green establishing the utility of BFASA against monitoring of Al³⁺ and only Cu²⁺/Al³⁺ significantly enhanced the absorbance intensity of the probe solution at 433 and 406, respectively. Its ability to selectively sense Al³⁺ demonstrated "switch-on" fluorescence responses for Al³⁺ with a low detection limit (LOD) of 0.56 μM and good selectivity, and pH adaptation range (5-8). The stoichiometric ratio of BFASA against the Al³⁺ was verified by the Job's plot and TOF-MS analysis and determined as 1:2. To make the recognition process inexpensively, viable and straightforward, Smartphone application of BFASA was effectively applied to Al³⁺ sensing, which could benefit the on-site Al³⁺ recognition. In the fluorescence bio-imaging aspect, the BFASA could effectively monitor Al³⁺ in living cells.

Multicomponent synthesis of chromophores – The one-pot approach to functional π-systems

Multicomponent reactions, conducted in a domino, sequential or consecutive fashion, have not only considerably enhanced synthetic efficiency as one-pot methodology, but they have also become an enabling tool for interdisciplinary research. The highly diversity-oriented nature of the synthetic concept allows accessing huge structural and functional space. Already some decades ago this has been recognized for life sciences, in particular, lead finding and exploration in pharma and agricultural chemistry. The quest for novel functional materials has also opened the field for diversity-oriented syntheses of functional π-systems, i.e. dyes for photonic and electronic applications based on their electronic properties. This review summarizes recent developments in MCR syntheses of functional chromophores highlighting syntheses following either the framework forming scaffold approach by establishing connectivity between chromophores or the chromogenic chromophore approach by de novo formation of chromophore of interest. Both approaches warrant rapid access to molecular functional π-systems, i.e. chromophores, fluorophores, and electrophores for various applications.

Research Progress on Up-Conversion Fluorescence Probe for Detection of Perfluorooctanoic Acid in Water Treatment

Perfluorooctanoic acid (PFOA) is a new type of organic pollutant in wastewater that is persistent, toxic, and accumulates in living organisms. The development of rapid and sensitive analytical methods to detect PFOA in environmental media is of great importance. Fluorescence detection has the advantages of high efficiency and low cost, in which fluorescent probes have excellent fluorescence properties, excellent bio-solubility, and remarkable photostability. It is necessary to review the fluorescence detection routes for PFOA. In addition, the up-conversion of fluorescent materials (UCNPs), as fluorescent materials to prepare fluorescent probes with, has significant advantages and also attracts the attention of researchers, however, reviews related to their application in detecting PFOA and comparing them with other routes are rare. Furthermore, there are many strategies to improve the performance of up-conversion fluorescent probes including SiO₂ modification and amino modification. These strategies can enhance the detection effect of PFOA. Thus, this work reviews the types of fluorescence detection, the design, and synthesis of UCNPs, their recognition mechanism, properties, and their application progress. Moreover, the development trend and prospects of these detection probes are given.

3-Aminopyridine Salicylidene: A Sensitive and Selective Chemosensor for the Detection of Cu(II), Al(III), and Fe(III) with Application to Real Samples

Interest in developing selective and sensitive metal sensors for environmental, biological, and industrial applications is mounting. The goal of this work was to develop a sensitive and selective sensor for certain metal ions in solution. The goal was achieved via (i) preparing the sensor ((E)-2-((pyridine-3-ylimino)methyl)phenol) (3APS) using microwave radiation in a short time and high yield and (ii) performing spectrophotometric titrations for 3APS with several metal ions. 3APS, a Schiff base, was prepared in 5 min and in a high yield (95%) using microwave-assisted synthesis. The compound was characterized by FTIR, XRD, NMR, and elemental analysis. Spectrophotometric titration of 3APS was performed with Al(III), Ba(II), Cd(II), Co(II), Cu(II), Fe(III), Mn(II), Ni(II), and Zn(II). 3APS showed good abilities to detect Al(III) and Fe(III) ions fluorescently and Cu(II) ion colorimetrically. The L/M stoichiometric ratio was 2:1 for Cu(II) and 1:1 for Al(III) and Fe(III). Low detection limits (μg/L) of 324, 20, and 45 were achieved for Cu(II), Al(III), and Fe(III), respectively. The detection of aluminum was also demonstrated in antiperspirant deodorants, test strips, and applications in secret writing. 3APS showed high fluorescent selectivity for Al(III) and Fe(III) and colorimetric selectivity towards Cu(II) with detection limits lower than corresponding safe drinking water guidelines.

A naphthalene-based azo armed molecular framework for selective sensing of Al3+

A naphthalene-based azo armed molecular derivative was synthesized for sensing of Al3+ and cell imaging studies. The fluorescence enhancement is caused by restricted CN isomerization, CHEF on, and PET-off processes.

Adenosine triphosphate (ATP) and zinc(II) ions responsive pyrene based turn-on fluorescent probe and its application in live cell imaging

A novel highly selective and sensitive turn-on fluorescent chemosensor PCE to recognize Zn²⁺ has been developed. The sensor PCE displays a remarkable fluorescent enhancement at 456 nm (λ_ex = 340 nm) with Zn²⁺ without the interference of other biologically important relevant metal ions in aqueous acetonitrile solution. Job's plot and mass spectral studies divulge such the interaction of PCE by Zn²⁺ was 1:1 binding stoichiometry. The association constant and detection limit of PCE to recognize Zn²⁺ was found to be 0.948 × 10⁴ M^-1 and 4.82 × 10^-7 M respectively. The nature of turn-on fluorescence sensor was supported by TD-DFT calculations. And the synthesized probe PCE was able to image intracellular Zn²⁺ in living cells using confocal imaging techniques. PCE-Zn ensemble showed the remarkable fluorescence enhancement with ATP selectively among other biologically important phosphates. ³¹P NMR experiments suggesting that the triphosphates unit of ATP is intact with the PCEZn. PCE-Zn ensemble can be utilized for monitoring ATP in live cells.

Studies of the labile lead pool using a rhodamine-based fluorescent probe

Lead is a heavy metal which has long been known to have toxic effects on the body. However, much remains to be learnt about the labile lead pool and cellular uptake of lead. We report here RPb1 that undergoes a 100-fold increase in fluorescence emission in the presence of Pb2+, and which can be applied to study the labile lead pool within cells. We demonstrate the capacity of RPb1 for investigating labile lead pool in DLD-1 cells and changes in labile lead during differentiation of K562 cells.

Pyrene-Based "Turn-Off" Probe with Broad Detection Range for Cu2+ , Pb2+ and Hg2+ Ions

Detection of metals in different environments with high selectivity and specificity is one of the prerequisites of the fight against environmental pollution with these elements. Pyrenes are well suited for the fluorescence sensing in different media. The applied sensing principle typically relies on the formation of intra- and intermolecular excimers, which is however limiting the sensitivity range due to masking of e. g. quenching effects by the excimer emission. Herein we report a highly selective, structurally rigid chemical sensor based on the monomer fluorescence of pyrene moieties bearing triazole groups. This sensor can quantitatively detect Cu2+ , Pb2+ and Hg2+ in organic solvents over a broad concentrations range, even in the presence of ubiquitous ions such as Na+ , K+ , Ca2+ and Mg2+ . The strongly emissive sensor's fluorescence with a long lifetime of 165 ns is quenched by a 1 : 1 complex formation upon addition of metal ions in acetonitrile. Upon addition of a tenfold excess of the metal ion to the sensor, agglomerates with a diameter of about 3 nm are formed. Due to complex interactions in the system, conventional linear correlations are not observed for all concentrations. Therefore, a critical comparison between the conventional Job plot interpretation, the method of Benesi-Hildebrand, and a non-linear fit is presented. The reported system enables the specific and robust sensing of medically and environmentally relevant ions in the health-relevant nM range and could be used e. g. for the monitoring of the respective ions in waste streams.

2-Hydroxynaphthalene based acylhydrazone as a turn-on fluorescent chemosensor for Al3+ detection and its real sample applications

Developing high performance fluorescent chemosensor for Al³⁺ detection is highly desirable, due to the excess of Al³⁺ will lead to many diseases. In this paper, a simple 2-hydroxynaphthalene-based fluorescent chemosensor has been synthesized and characterized by different spectroscopic methods. The compound exhibited an "turn-on-type" fluorescent chemosensing for the detection of Al³⁺, which was ascribed to the chelation-enhanced fluorescence (CHEF). The high selectivity and sensitivity of the compound for Al³⁺ were verified by fluorescence spectra in its DMF solution, and the enhancement of fluorescent intensity could be observed by naked-eye from non-fluorescence to green light. The detection limit of the compound for Al³⁺ was found to be 4.22 × 10^-8 M and the stability constant was 4.82 × 10⁴ M^-1. The 1:1 binding stoichiometry of the compound to Al³⁺ was confirmed from the Job's plot based on fluorescence titrations. Additionally, the sensing process of the compound to Al³⁺ was chemically reversible by adding Na₂EDTA. Importantly, the probe was successfully applied to quantitative analysis of Al³⁺ in real drug and potable water samples.

FRET based ratiometric switch for selective sensing of Al3+ with bio-imaging in human peripheral blood mononuclear cells

FRET based ratiometric switch for selective sensing of Al³⁺ with bio-imaging in human peripheral blood mononuclear cells (PBMCs).

Dual-Emission Zr-MOF-Based Composite Material as a Fluorescence Turn-On Sensor for the Ultrasensitive Detection of Al3

In this work, a novel zirconium-based metal-organic framework (MOF) composite material, UiO-(OH)₂@RhB, has been solvothermally prepared with zirconyl chloride octahydrate, 2,5-dihydroxyterephthalic acid, and rhodamine B (RhB) for ratiometric fluorescence sensing of Al³⁺ ions in an aqueous medium. The luminescence measurement results showed that, at the single excitation wavelength of 420 nm, the fluorescence intensity of the ligand at 500 nm increased significantly in the case of Al³⁺, while that of RhB at 583 nm changed slightly, together with an apparent color change. Under optimal conditions, UiO-(OH)₂@RhB exhibited an extraordinary sensitivity (10 nM), good selectivity, and a fast response (2 min) for Al³⁺. As far as we know, the limit of detection is superior to that of the current reported MOF-based Al³⁺ fluorescence sensors. The response mechanism suggested that -OH could capture Al³⁺ in water through coordination and high electrostatic affinity and achieved turn-on ratiometric fluorescence through the excited-state intramolecular proton transfer process and stable fluorescence of RhB. In addition, this sensor was also applied to actual food samples (grain beans), with the recoveries ranging from 89.08% to 113.61%. Such a turn-on ratiometric fluorescence sensor will provide a constructive strategy for the ultrasensitive detection of Al³⁺ in practical applications.

Thiazolidine based fluorescent chemosensors for aluminum ions and their applications in biological imaging

Utilization of fluorescent techniques in detection of various metal ions actively pursued allow ultrasensitive and selective detections of metal ions and prevent the adverse effect of cations such as aluminum (III) ions. In this study, two novel fluorescent chemosensors containing thiazole derivatives, ((E)-2-(4-hydroxy-3-(((2-hydroxyphenyl)imino)methyl)phenyl)-3-phenyl thiazolidin-4-one) AM1 and (2,3-bis(4-hydroxy-3-((E)-((2-hydroxyphenyl)imino) methyl) phenyl) thiazolidin-4-one) AM2, have been fabricated. The probes AM1 and AM2 were prepared using the condensation reaction between 2-hydroxy-5-(4-oxo-3-phenyl thiazolidin-2-yl) benzaldehyde and 2-aminophenol for the probe AM1 and 5,5'-(4-oxothiazolidine-2,3-diyl)bis(2-hydroxy benzaldehyde) and 2-aminophenol for the probe AM2. Afterwards, they were analyzed by various types of NMR and FT-IR spectroscopy, ESI-MS spectra, and elemental anayzer. As a second step, each fabricated chemosensor was able to use turn on fluorescence sensing for detecting of Al³⁺ ions in ACN/H₂O (v/v = 50/50, 10.0 μM, pH = 7.0) solution. Clear complexes formed between the probe AM1 and Al³⁺ ions and also the probe AM2 and Al³⁺ ions was determined by not only ¹H NMR titration study but also calculated by using the Job's plot. The limit of detection (LOD) value was found to be 0.11 μM (AM1) and 4.4 μM (AM2) for Al³⁺ ions. Likewise, cell imaging and in vitro cytotoxicity experiments of Al³⁺ ions in Human epithelium Lovo cells exhibited that prepared chemosensors had low cytotoxicity and blue fluorescence when they treated with of Al³⁺ ions in the cellular system.

Merocyanine-based turn-on fluorescent probe for the sensitive and selective determination of thiophenols via a pKa shift mechanism

The development of fluorescent probes for the sensitive and selective determination of highly toxic thiophenols is considerably important in the fields of biological and environmental sciences. Herein, a turn-on fluorescent probe for thiophenol, named MCSH, was constructed based on a pK_a shift mechanism, employing merocyanine dye as the fluorophore and 2,-4-dinitrobenzenesulfonamide (DNBS) group as the recognition unit. The imine nitrogen of MCSH has a pK_a value of 4.12, which renders its non-fluorescent Schiff base form exclusively under neutral conditions. However, after reacting with thiophenols, its DNBS group was removed to afford a merocyanine dye as the final product, whose pK_a value upshifts to 8.11, and was present mainly as the fluorescent protonated Schiff base form under neutral media. Such drastic change in pK_a values leads to a significant fluorescence enhancement and can be utilized for the detection of thiophenols. The fluorescence intensity at 627 nm increases linearly with thiophenol concentration in the range of 0.2-3 μM with a detection limit of 15 nM (S/N = 3). MCSH displays high selectivity for the detection of thiophenols over a wide range of other analytes, including aliphatic thiols. Furthermore, the preliminary applications of MCSH for monitoring thiophenols in living cells and environmental have been carried out.

A pH tuning single fluorescent probe based on naphthalene for dual-analytes (Mg2+ and Al3+) and its application in cell imaging

In this study, a naphthalene Schiff-base P which serves as a dual-analyte probe for the quantitative detection of Al3+ and Mg2+ has been designed. The proposed probe showed an ''off-on'' fluorescent response toward Al3+ in ethanol-water solution (1 : 9, v/v, pH 6.3, 20 mM HEPES) over other metal ions and anions, while the detection by the probe could be switched to Mg2+ by regulating the pH from 6.3 to 9.4. The sensing mechanisms of P to Al3+/Mg2+ are attributed to inhibition of the photo-induced electron transfer (PET) process by the formation of 1 : 1 ligand-metal complexes. More importantly, the probe was applied successfully in living cells for the fluorescent cell-imaging of Al3+ and Mg2+.

Molecular design strategies of multifunctional probe for simultaneous monitoring of Cu2+, Al3+, Ca2+ and endogenous l-phenylalanine (LPA) recognition in living cells and zebrafishes

An innovative strategy of adjusting the molecular polarity of organics is applied for multifunctional simultaneous ions detection. It involved the use of 4-bromo-2-hydroxyben Rhodamine B hydrazide (RHBr) as a colorimetric and fluorescent multifunctional chemosensor. Briefly, it was designed and prepared via integrating 4-bromo-2-hydroxybenzaldehyde with Rhodamine B hydrazide, and Rhodamine B as fluorophore group, CO, -CHN and -OH groups as reaction site, Br atom as electro n-withdrawing group. On the basis of theoretical calculation under Gaussian 09 software suit, RHBr could exclusively recognize Cu²⁺, Al³⁺ and Ca²⁺. This was also experimentally confirmed by the different turn-on colorimetric and fluorescent signals. For example the selective detection of Cu²⁺ ion in DMSO/H₂O (1/1 = v/v, 10.0 mM HEPES pH 7.0) with the "naked-eye" when the color changed from colorless to pink, Al³⁺ with "turn-on" strong orange-red fluorescence and Ca²⁺ with strong green fluorescence in EtOH/H₂O (v/v = 95/5). Under the optimized conditions, all the ions could be detected at a very low concentrations (1.7 × 10^-7 M, 1.0 × 10^-8 M, 2.8 × 10^-7 M for Cu²⁺, Al³⁺, and Ca²⁺, respectively). In addition, the "in situ" formed RHBr-Al³⁺ was used to recognize l-phenylalanine (LPA) with a "turn-off" fluorescence ranging from 0.03-10.0 μM with the low detection concetration of 3.0 × 10^-7 M. The sensing mechanisms of RHBr toward three metal ions and the ensemble RHBr-Al³⁺ toward the l-phenylalanine (LPA) were further investigated in detail. Practical application experiments further proved that RHBr had good cell permeability and could be utilized to detect Al³⁺ and Ca²⁺, and the complexes of RHBr-Al³⁺ could be applied to detect l-phenylalanine (LPA) in the living cells and zebrafishes, respectively.

Study on synthesis and fluorescence property of rhodamine-naphthalene conjugate

In this study, a novel ligand (HL) consisting of 2-methyl quinoline-4-carboxylic acid, rhodamine and naphthalene moiety, was designed and synthesized, it could be developed a ratiometric fluorescent sensor for selective detection of Al³⁺ via fluorescence resonance energy transfer (FRET) from naphthalimide moiety to rhodamine moiety. The addition of Al³⁺ trigger the significant fluorescence enhancement of HL at 550 nm at the expense of the fluorescent emission of HL centered at 524 nm.

Detection of Al3+ and Fe3+ ions by nitrobenzoxadiazole bearing pyridine-2,6-dicarboxamide based chemosensors: effect of solvents on detection

Hybrid chemosensors, based on a pyridine-2,6-dicarboxamide fragment while containing a 4-nitrobenzoxadiazole group, are used for the sensing of Al³⁺ and Fe³⁺ ions where detection was significantly controlled by the selection of a solvent.

A fluorescent sensor for intracellular Zn2+ based on cylindrical molecular brushes of poly(2-oxazoline) through ion-induced emission

Poly(2-oxazoline) molecular brushes bearing enaminitrile receptors in the side chain ends exhibit good biocompatibility, excellent fluorescent selectivity for Zn²⁺, and possibility in detecting intracellular Zn²⁺.

A novel turn on fluorescent probe for the determination of Al3+ and Zn2+ ions and its cells applications

Early detection of probes is very important for limiting toxic effects of various transition metal ions for example aluminum and zinc. Monitoring of these metal ions can be challenging via conventional methods since they are high cost instrumentations, time consuming and so on. We report facile preparation of a fluorescence probe containing biphenyl groups that effectively selective and superb sensitivity towards aluminum (III) and zinc (II) in neutral solutions without interference from each other and other ions. In neutral pH value, the probe FOB displayed the OFF-ON fluorescence enhancement at 464 nm and 512 nm toward aluminum (III) and zinc (II), respectively. The detection limit values of FOB for Al³⁺ and Zn²⁺ in neutral solutions were 1.27 and 1.02 nM, respectively and these values were significantly lower than permitted Al³⁺ and Zn²⁺ concentrations in drinking water determined by the World Health Organization (WHO) and European Water Quality. Also, fabricated cyano-biphenyl based probe is effective for sensing for aluminum (III) and zinc (II) in living human colon cancer cells even when employed at low concentrations (1.0 μM). Overall, this work allows us to obtain a great potential to be applied to detect Al³⁺ and Zn²⁺.

Pyrene-phenylglycinol linked reversible ratiometric fluorescent chemosensor for the detection of aluminium in nanomolar range and its bio-imaging

Pyrene-phenylglycinol tangled ratiometric sensor (R)-1 was developed for the detection of Al³⁺ ion over other metal ions. Ratiometric behaviour of (R)-1 for Al³⁺ ion explained through monomer emission and excimer quenching leads to avoiding the π-π interactions of bis-pyrene rings. Pull-push to push-pull binding mechanism is successfully explained by DFT and sensing of Al³⁺-ions demonstrated in living cells. The LOD of (R)-1 for Al³⁺ downs to nanomolar concentrations which is lower than the allowed concentration of drinking water set by the (World Health Organization) WHO.

A simple turn-on ESIPT and PET-based fluorescent probe for detection of Al3+ in real-water sample

Aluminum is known as the most ubiquitous metal in earth's crust but its excessive exposure will cause damage to environment and health of the organism. Here, a turn-on Schiff base fluorescence probe STH based on excited state intramolecular proton transfer and photoelectron transfer processes for Al³⁺ detection with fast response rate (within minutes), low detection limit (4.26×10^-8M), high selectivity and reasonable pH application range (5.0-8.0) was developed. Fluorescence titration experiments show that probe STH has an excellent linear relationship (R²=0.9694) with Al³⁺ concentration and could be applied to quantitatively recognize Al³⁺ in real-water samples. Based on Job's plot and in situ mass spectra, two STH molecules will complex with Al³⁺ to form 2:1 complexation with oxygen atoms of hydroxyl and carbonyl groups and nitrogen atom of CN bond participating in coordination.

A new fluorescent-colorimetric chemosensor based on a Schiff base for detecting Cr3+, Cu2+, Fe3+ and Al3+ ions

A new Schiff base derivative fluorescence-colorimetric chemosensor 2-hydroxy-5-[(2-hydroxy-1-naphthyl)methylideneamino]benzoic acid (H₃L), has been designed and synthesized. H₃L displayed high selectivity and sensitivity for detecting Cr³⁺, Cu²⁺, Fe³⁺ and Al³⁺ ions in DMF/H₂O (v/v = 1/1) solution. When Cr³⁺, Cu²⁺ or Fe³⁺ ions were added, the solution of H₃L in DMF/H₂O exhibited different color changes. While with the addition of Fe³⁺ or Al³⁺ ions, the solution of H₃L in DMF/H₂O displayed different fluorescence responses. The bonding modes and bonding ratios of H₃L and metal ions were explored by the Job's plot, ¹H NMR titration, and electrospray ionization mass spectrometry (ESI-MS). The detection limits of H₃L with Cr³⁺, Cu²⁺, Fe³⁺and Al³⁺ ions were 3.37 × 10^-7 M, 4.65 × 10^-7 M, 3.58 × 10^-7 M and 4.89 × 10^-7 M, respectively.