Unsupported Nanoporous Gold Catalyst for Highly Selective Hydrogenation of Quinolines

Nanoporous Gold: From Structure Evolution to Functional Properties in Catalysis and Electrochemistry

Nanoporous gold (NPG) is characterized by a bicontinuous network of nanometer-sized metallic struts and interconnected pores formed spontaneously by oxidative dissolution of the less noble element from gold alloys. The resulting material exhibits decent catalytic activity for low-temperature, aerobic total as well as partial oxidation reactions, the oxidative coupling of methanol to methyl formate being the prototypical example. This review not only provides a critical discussion of ways to tune the morphology and composition of this material and its implication for catalysis and electrocatalysis, but will also exemplarily review the current mechanistic understanding of the partial oxidation of methanol using information from quantum chemical studies, model studies on single-crystal surfaces, gas phase catalysis, aerobic liquid phase oxidation, and electrocatalysis. In this respect, a particular focus will be on mechanistic aspects not well understood, yet. Apart from the mechanistic aspects of catalysis, best practice examples with respect to material preparation and characterization will be discussed. These can improve the reproducibility of the materials property such as the catalytic activity and selectivity as well as the scope of reactions being identified as the main challenges for a broader application of NPG in target-oriented organic synthesis.

In-situ formation of co particles encapsulated by graphene layers

The process of encapsulating cobalt nanoparticles using a graphene layer is mainly direct pyrolysis. The encapsulation structure of hybrids prepared in this way improves the catalyst stability, which greatly reduces the leaching of non-metals and prevents metal nanoparticles from growing beyond a certain size. In this study, cobalt particles surrounded by graphene layers were formed by increasing the temperature in a transmission electron microscope, and they were analyzed using scanning transmission electron microscopy (STEM). Synthesized cobalt hydroxide nanosheets were used to obtain cobalt particles using an in-situ heating holder inside a TEM column. The cobalt nanoparticles are surrounded by layers of graphene, and the number of layers increases as the temperature increases. The interlayer spacing of the graphene layers was also investigated using atomic imaging. The success achieved in the encapsulation of metallic nanoparticles in graphene layers paves the way for the design of highly active and reusable heterogeneous catalysts for more challenging molecules.

Scaffold hopping by net photochemical carbon deletion of azaarenes

Discovery chemists routinely identify purpose-tailored molecules through an iterative structural optimization approach, but the preparation of each successive candidate in a compound series can rarely be conducted in a manner matching their thought process. This is because many of the necessary chemical transformations required to modify compound cores in a straightforward fashion are not applicable in complex contexts. We report a method that addresses one facet of this problem by allowing chemists to hop directly between chemically distinct heteroaromatic scaffolds. Specifically, we show that selective photolysis of quinoline N-oxides with 390-nanometer light followed by acid-promoted rearrangement affords N-acylindoles while showing broad compatibility with medicinally relevant functionality. Applications to late-stage skeletal modification of compounds of pharmaceutical interest and more complex transformations involving serial single-atom changes are demonstrated.

Nanoporous Gold Catalyst for the Oxidative N-dealkylation of Drug Molecules: A Method for Synthesis of N-dealkylated Metabolites

A novel method for the selective catalytic N‐dealkylation of drug molecules on a nanoporous gold (NPG) catalyst producing valuable N‐dealkylated metabolites and intermediates is described. Drug metabolites are important chemical entities at every stage of drug discovery and development, from exploratory discovery to clinical development, providing the safety profiles and the ADME (adsorption, distribution, metabolism, and elimination) of new drug candidates. Synthesis was carried out in aqueous solution at 80 °C using air (oxygen source) as oxidant, in single step with good isolated yields. Different examples examined in this study showed that aerobic catalytic N‐dealkylation of drug molecules on NPG has a broad scope supporting N‐deethylation, N‐deisopropylation and N‐demethylation, converting either 3° amines to 2° amines, or 2° amines to 1° amines.

A recyclable self-supported nanoporous PdCu heterogeneous catalyst for aqueous Suzuki-Miyaura cross-coupling

Nanoporous PdCu (NP-PdCu) was prepared by the dealloying strategy from a PdCuAl ternary alloy precursor and characterized systematically using SEM, TEM, XRD, and XPS. NP-PdCu was demonstrated to be a competent self-supported heterogenous catalyst for Suzuki-Miyaura cross-coupling, affording a series of synthetically valuable biaryl compounds in good to excellent yields. This catalyst could be easily separated from the product via centrifugation and reused several times without obvious loss of catalytic performance.

Visible-Light-Induced Synthesis of 1,2,3,4-Tetrahydroquinolines through Formal [4+2] Cycloaddition of Acyclic α,β-Unsaturated Amides and Imides with N,N-Dialkylanilines

1,2,3,4-Tetrahydroquinolines should be applicable to the development of new pharmaceutical agents. A facile synthesis of 1,2,3,4-tetrahydroquinolines that is achieved by a photoinduced formal [4+2] cycloaddition reaction of acyclic α,β-unsaturated amides and imides with N,N-dialkylanilines under visible-light irradiation, in which a new Ir^III complex photosensitizer, a thiourea, and an oxidant act cooperatively in promoting the reaction, is reported. The photoreaction enables the synthesis of a wide variety of 1,2,3,4-tetrahydroquinolines, while controlling the trans/cis diastereoselectivity (>99:1) and constructing contiguous stereogenic centers. A chemoselective cleavage of an acyclic imide auxiliary is demonstrated.

Transfer hydrogenation of N-heteroarenes with 2-propanol and ethanol enabled by manganese catalysis

A convenient well-defined manganese catalyzed transfer hydrogenation of N-heteroarenes using 2-propanol and ethanol as hydrogen sources is developed. DFT calculations support an outer sphere hydrogenation mechanism.

Tandem synthesis of tetrahydroquinolines and identification of the reaction network by operando NMR

Bifunctional MOF supported Pd nanoparticles for the one-pot tandem synthesis of substituted tetrahydroquinolines were developed, and operando high-pressure MAS-NMR were performed to understand the complex reaction network.

General and Efficient Copper-Catalyzed Oxazaborolidine Complex in Transfer Hydrogenation of Isoquinolines under Mild Conditions

A general and efficient method for copper-catalyzed transfer hydrogenation of isoquinolines with an oxazaborolidine-BH₃ complex, under mild reaction conditions, is successfully developed. A broad range of isoquinolines has been reduced to the corresponding products with 61-85% yields. The method is applied to the synthesis of biologically active tetrahydrosioquinoline alkaloid (±)-norlaudanosine in 62% yield, which is the key precursor for the preparation of (±)-laudanosine, (±)-N-methyl-laudanosine, and (±)-xylopinine in one or two steps.

Fe Single Atoms and Fe2O3 Clusters Liberated from N-Doped Polyhedral Carbon for Chemoselective Hydrogenation under Mild Conditions

In the area of catalysis, selective reduction of nitro compounds to amino compounds is a colossal challenge due to the existence of competitive reducible functional groups. Herein, an Fe-based catalyst Fe_SAs/Fe₂O_3ACs/N-doped polyhedral carbon (NPC) has been designed and synthesized. As we expected, compared with Fe_SAs and Fe_NPs, Fe_SAs/Fe₂O_3ACs/NPC shows excellent catalytic performance (turnover frequency up to 1923 h^-1, calculated with nitrobenzene), chemoselectivity, and tolerance during the hydrogenation reaction of nitro compounds under room temperature because of the synergistic effects between Fe_SAs and Fe₂O_3ACs. The theoretical calculations show that Fe_SAs prefers to undergo hydrazine decomposition to generate hydrogen and the Fe₂O_3ACs surface is more active toward the nitrobenzene reduction to aniline.

One-Step High-Temperature-Synthesized Single-Atom Platinum Catalyst for Efficient Selective Hydrogenation

Although single-atom catalysts significantly improve the atom utilization efficiency, the multistep preparation procedures are complicated and difficult to control. Herein, we demonstrate that one-step in situ synthesis of the single-atom Pt anchored in single-crystal MoC (Pt₁/MoC) by using facile and controllable arc-discharge strategy under extreme conditions. The high temperature (up to 4000°C) provides the sufficient energy for atom dispersion and overall stability by forming thermodynamically favourable metal-support interactions. The high-temperature-stabilized Pt₁/MoC exhibits outstanding performance and excellent thermal stability as durable catalyst for selective quinoline hydrogenation. The initial turnover frequency of 3710 h^-1 is greater than those of previously reported samples by an order of magnitude under 2 MPa H₂ at 100°C. The catalyst also shows broad scope activity toward hydrogenation containing unsaturated groups of C=C, C=N, and C=O. The facile, one-step, and fast arc-discharge method provides an effective avenue for single-atom catalyst fabrication that is conventionally challenging.

Ruthenium-Catalyzed Reductive Cleavage of Unstrained Aryl-Aryl Bonds: Reaction Development and Mechanistic Study

Cleavage of carbon-carbon bonds has been found in some important industrial processes, for example, petroleum cracking, and has inspired development of numerous synthetic methods. However, nonpolar unstrained C(aryl)-C(aryl) bonds remain one of the toughest bonds to be activated. As a detailed study of a fundamental reaction mode, here a full story is described about our development of a Ru-catalyzed reductive cleavage of unstrained C(aryl)-C(aryl) bonds. A wide range of biaryl compounds that contain directing groups (DGs) at 2,2' positions can serve as effective substrates. Various heterocycles, such as pyridine, quinoline, pyrimidine, and pyrazole, can be employed as DGs. Besides hydrogen gas, other reagents, such as Hantzsch ester, silanes, and alcohols, can be employed as terminal reductants. The reaction is pH neutral and free of oxidants; thus a number of functional groups are tolerated. Notably, a one-pot C-C activation/C-C coupling has been realized. Computational and experimental mechanistic studies indicate that the reaction involves a ruthenium(II) monohydride-mediated C(aryl)-C(aryl) activation and the resting state of the catalyst is a η4-coordinated ruthenium(II) dichloride complex, which could inspire development of other transformations based on this reaction mode.

Expedient access to saturated nitrogen heterocycles by photoredox cyclization of imino-tethered dihydropyridines

A large proportion of medicinally relevant molecules bear nitrogen and sp³-hybridized carbon functionalities. Overwhelmingly, these atoms are found as part of (hetero)cyclic structures. Despite their importance, synthetic approaches to saturated nitrogen heterocycles are limited to several established stoichiometric alkylation techniques, as well as a few methods involving C-H bond activation. The synthetic community remains interested in more general, mild, and sustainable ways to access these motifs. Here we describe a dual-catalyst system composed of an iridium photocatalyst and a lithium phosphate base that is capable of selectively homolyzing the N-H bond of 4-alkyl-1,4-dihydropyridines, presumably by proton-coupled-electron-transfer (PCET), and mediating efficient cyclization of the resultant carbon-centered radicals with tethered imines. The outcome of this transformation is access to a broad range of structurally complex nitrogen heterocycles obtainable from simple aldehyde starting materials in a highly chemoselective manner.

Support-Free Pd3 Co NCs as an Efficient Heterogeneous Nanocatalyst for New Organic Transformations of C-C Coupling Reactions

A support-free heterogeneous Pd₃ Co nanostructured composite (NC), synthesized through a hydrothermal route, acted as an effective catalytic system in multivariate Heck-, Sonogashira-, and Suzuki-type coupling reactions of iodonium ylides. The XPS analysis of the bimetallic Pd₃ Co NCs confirmed the elemental composition as 75 % palladium and 25 % cobalt. Furthermore, high-resolution (HR) TEM analysis confirmed the spherical morphology of the Pd₃ Co bimetallic nanoparticles. The average diameter of the NCs is 14.8 nm. The coupling reaction proceeded through the generation of α-iodoenones with simultaneous migration of the phenyl group, thereby giving a scaffold with higher atom economy. The heterogeneous Pd₃ Co NCs were recycled and reused without any significant change in catalytic ability for up to five reaction cycles. The high concentration of Pd and association of cobalt into the lattice of palladium appears to enhance its catalytic ability for the diverse coupling reactions in comparison with its monometallic counterparts as well as with bimetallic NCs with a comparatively lesser amount of Pd.

Catalytic Performance of Nanoporous Metal Skeleton Catalysts for Molecular Transformations

Nanoporous metal (MNPore) skeleton catalysts have attracted increasing attention in the field of green and sustainable heterogeneous catalysis owing to their unique three-dimensional nanopore structural features. In general, MNPores are fabricated through chemical or electrochemical corrosive dealloying of monolithic alloys. The dealloying process produces various MNPores with an open nanoporous network structure by formation of concave and convex hyperboloid-like ligaments. The large surface-to-volume ratio compared to bulk metals and high density of steps and kinks on ligaments of the unsupported MNPores make them promising heterogeneous catalyst candidates for highly active and selective molecular transformations. In this context, a variety of heterogeneous catalytic reactions using MNPores as nanocatalysts under gas- and liquid-phase conditions were developed over the last decade. In addition, the bulk metallic shape and mechanistic rigidity of the MNPore catalysts make the processes of catalyst recovery and reuse more facile and greener. This Minireview mainly focuses on the catalytic performance of nanoporous Au, Pd, Cu, and AuPd with respect to the achievements on catalytic applications in various molecular transformations.

Copper-Catalyzed Transfer Hydrogenation of N-Heteroaromatics with an Oxazaborolidine Complex

The first-time use of the oxazaborolidine complex in transfer hydrogenation was accomplished. It was prepared without difficulty from cheap materials: ethanolamine and BH₃·THF. A general and efficient method for copper-catalyzed transfer hydrogenation of a variety of N-heteroaromatics with an oxazaborolidine-BH₃ complex under mild reaction conditions afforded the corresponding hydrogenated products in up to 96% yield. Mechanistic studies indicate that the hydrogen source originated from water and borane that coordinate with the nitrogen atom of oxazaborolidine. Accordingly, a plausible mechanism for this reaction was proposed. This method was successfully used in the key step synthesis of natural products (±)-angustureine and (±)-galipinine in three steps.

Progress in the Chemistry of Tetrahydroquinolines

Tetrahydroquinoline is one of the most important simple nitrogen heterocycles, being widespread in nature and present in a broad variety of pharmacologically active compounds. This Review summarizes the progress achieved in the chemistry of tetrahydroquinolines, with emphasis on their synthesis, during the period from mid-2010 to early 2018.

Polydimethylsiloxane Sponge-Supported Nanometer Gold: Highly Efficient Recyclable Catalyst for Cross-Dehydrogenative Coupling in Water

Polydimethylsiloxane (PDMS, a stable hydrophobic polymer material) sponge-supported nanometer-sized gold can be used as a highly efficient recyclable catalyst for cross-dehydrogenative coupling of tertiary amines with various nucleophiles in water. This PDMS sponge nanometer gold catalyst can provide much better activity than the free nanometer gold in water. The reaction can be scaled up by using an easy-to-build continuous flow reactor. These results indicate the potential application of porous hydrophobic PDMS sponge material as a promising support for highly efficient recyclable catalysts in water.

Silylation reactions on nanoporous gold via homolytic Si-H activation of silanes

We report compelling evidences that dihydrosilanes are activated in a homolytic fashion on the surface of nanoporous gold (NPG), which produces hydrogen radical and silicon moieties covalently linked to the surface of the NPG. This new reactivity has led to the development of novel silylation reactions on gold.

Si–H bond activation is an important process implicated in many useful synthetic applications including silylation and transfer hydrogenation reactions. Herein we discovered homolytic activation of Si–H bonds on the surface of nanoporous gold (NPG), forming hydrogen radicals and [Au]–[Si] intermediates. By virtue of this new reactivity, we achieved highly selective mono and sequential alcoholysis of dihydrosilane. In addition, the amphiphilic nature of the [Au]–[Si] intermediate allows for a new bis-silylation reaction of cyclic ethers. The present work showcased that the surface reactivity of nanocatalysts may provide exciting opportunity for new reaction discovery.

Facile hydrogenation of N-heteroarenes by magnetic nanoparticle-supported sub-nanometric Rh catalysts in aqueous medium

This work describes the preparation and systematic characterization of a reusable magnetic heterogeneous nanocatalyst (Rh@Fe₃O₄) for the hydrogenation of N-heterocycles and simple aromatics.