Bromine-, chlorine-, and mixed halogen-substituted 4-methyl-2(5H)-furanones: synthesis and mutagenic effects of halogen and hydroxyl group replacements

Medicinal Plant Compounds for Combating the Multi-drug Resistant Pathogenic Bacteria: A Review

BACKGROUND

Globally, people utilize plants as the main source of remedy to heal various ailments. Medicinal plants have been utilized to treat ailments since the invention of modern scientific systems of medicine. The common remedy of infectious diseases mainly depends on the inhibition capacity of compounds or killing potential. The issue may give a clue for the development of a novel antimicrobial agent.

METHODS

Currently, microorganisms which are resistant towards antibiotics are probably a matter of serious concern for the overall well-being of health. At the moment, new therapeutic targets aside from the microorganism wall-based activities are in progress. For instance, the autoinducer molecules produced by the quorum sensing system are used to control antibiotic resistance and biofilm formation.

RESULTS

This therapeutic target is well-studied worldwide, however, the scientific data are not updated and only current studies started to gain insight into its perspective as a target to struggle against infectious diseases. Microbial resistance against antimicrobial compounds is a topic of serious concern in recent time.

CONCLUSION

Hence, this paper aims to confer a current overview of the novel compounds, quorum sensing, quorum quenching, biofilm formation in the development of antibiotic resistance and an update on their importance as a potential target for natural substances.

Bacterial Biofilm Control by Perturbation of Bacterial Signaling Processes

The development of effective strategies to combat biofilm infections by means of either mechanical or chemical approaches could dramatically change today’s treatment procedures for the benefit of thousands of patients. Remarkably, considering the increased focus on biofilms in general, there has still not been invented and/or developed any simple, efficient and reliable methods with which to “chemically” eradicate biofilm infections. This underlines the resilience of infective agents present as biofilms and it further emphasizes the insufficiency of today’s approaches used to combat chronic infections. A potential method for biofilm dismantling is chemical interception of regulatory processes that are specifically involved in the biofilm mode of life. In particular, bacterial cell to cell signaling called “Quorum Sensing” together with intracellular signaling by bis-(3′-5′)-cyclic-dimeric guanosine monophosphate (cyclic-di-GMP) have gained a lot of attention over the last two decades. More recently, regulatory processes governed by two component regulatory systems and small non-coding RNAs have been increasingly investigated. Here, we review novel findings and potentials of using small molecules to target and modulate these regulatory processes in the bacterium Pseudomonas aeruginosa to decrease its pathogenic potential.

Analysis of 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX) and its brominated analogues in chlorine-treated water by gas chromatography coupled to triple quadrupole tandem mass spectrometry (GC-QqQ-MS/MS)

A simple, selective and sensitive method for the analysis of the strong mutagen 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX) and its brominated analogues (BMXs) in chlorine-treated water has been developed. The method is based on gas chromatography coupled to triple quadrupole tandem mass spectrometry (GC-QqQ-MS/MS), previous liquid-liquid extraction (LLE) of a smaller sample volume compared to other methods and on-line derivatization with a silylation reactive. GC-QqQ-MS/MS has been raised as an alternative easier to perform than gas chromatography coupled to high resolution mass spectrometry (GC-HRMS) for the analysis of MX and BMXs, and it allows to achieve low LODs (0.3 ng/L for MX and 0.4-0.9 ng/L for BMXs). This technique had not been previously described for the analysis of MX and BMXs. Quality parameters were calculated and real samples related to 3 drinking water treatment plants (DWTPs), tap water and both untreated and chlorinated groundwater were analyzed. Concentrations of 0.3-6.6 ng/L for MX and 1.0-7.3 ng/L for BMXs were detected. Results were discussed according to five of the main factors affecting MX and BMXs formation in chlorine-treated water (organic precursors, influence of bromide ions, evolution of MX and BMXs in the drinking water distribution system, groundwater chlorination and infiltration of water coming from chlorination processes in groundwater).

Evaluation of genotoxic effects caused by extracts of chlorinated drinking water using a combination of three different bioassays

Potential genotoxic effects of chlorinated drinking water now are of a great concern. In this study, raw water, finished water, and tap water from a water plant in Wuhan, China were collected in two different sampling times of the year (January and July). Genotoxic effects of water extracts were evaluated using a combination of three different bioassays: SOS/umu test, HGPRT gene mutation assay, and micronucleus assay, which were separately used to detect DNA damage, gene mutation, and chromosome aberration. The results of three different bioassays showed that all water samples in January and July induced at least one types of genotoxic effects, of which the DNA-damage effects were all detectable. The levels of DNA-damage effects and gene-mutation effects of finished water and tap water in January were higher than those in July. Chlorination could increase the DNA-damage effects of drinking water in January and the gene-mutation effects of drinking water in both January and July, but did not increase the chromosome-aberration effects of drinking water in both January and July. Our results highlighted the importance of using a combination of different bioassays to evaluate the genotoxicity of water samples in different seasons.

The formation of biofilms by Pseudomonas aeruginosa: a review of the natural and synthetic compounds interfering with control mechanisms

P. aeruginosa is an opportunistic pathogenic bacterium responsible for both acute and chronic infections. Beyond its natural resistance to many drugs, its ability to form biofilm, a complex biological system, renders ineffective the clearance by immune defense systems and antibiotherapy. The objective of this report is to provide an overview (i) on P. aeruginosa biofilm lifestyle cycle, (ii) on the main key actors relevant in the regulation of biofilm formation by P. aeruginosa including QS systems, GacS/GacA and RetS/LadS two-component systems and C-di-GMP-dependent polysaccharides biosynthesis, and (iii) finally on reported natural and synthetic products that interfere with control mechanisms of biofilm formation by P. aeruginosa without affecting directly bacterial viability. Concluding remarks focus on perspectives to consider biofilm lifestyle as a target for eradication of resistant infections caused by P. aeruginosa.

Targeting quorum sensing in Pseudomonas aeruginosa biofilms: current and emerging inhibitors

Bacterial resistance to conventional antibiotics combined with an increasing acknowledgement of the role of biofilms in chronic infections has led to a growing interest in new antimicrobial strategies that target the biofilm mode of growth. In the aggregated biofilm mode, cell-to-cell communication systems involved in the process known as quorum sensing regulate coordinated expression of virulence with immune shielding mechanisms and antibiotic resistance. For two decades, the potential of interference with quorum sensing by small chemical compounds has been investigated with the aim of developing alternative antibacterial strategies. Here, we review state of the art research of quorum sensing inhibitors against the opportunistic human pathogen Pseudomonas aeruginosa, which is found in a number of biofilm-associated infections and identified as the predominant organism infecting the lungs of cystic fibrosis patients.

The effect of different boiling and filtering devices on the concentration of disinfection by-products in tap water

Disinfection by-products (DBPs) are ubiquitous contaminants in tap drinking water with the potential to produce adverse health effects. Filtering and boiling tap water can lead to changes in the DBP concentrations and modify the exposure through ingestion. Changes in the concentration of 4 individual trihalomethanes (THM4) (chloroform (TCM), bromodichloromethane (BDCM), dibromochloromethane (DBCM), and bromoform (TBM)), MX, and bromate were tested when boiling and filtering high bromine-containing tap water from Barcelona. For filtering, we used a pitcher-type filter and a household reverse osmosis filter; for boiling, an electric kettle, a saucepan, and a microwave were used. Samples were taken before and after each treatment to determine the change in the DBP concentration. pH, conductivity, and free/total chlorine were also measured. A large decrease of THM4 (from 48% to 97%) and MX concentrations was observed for all experiments. Bromine-containing trihalomethanes were mostly eliminated when filtering while chloroform when boiling. There was a large decrease in the concentration of bromate with reverse osmosis, but there was a little effect in the other experiments. These findings suggest that the exposure to THM4 and MX through ingestion is reduced when using these household appliances, while the decrease of bromate is device dependent. This needs to be considered in the exposure assessment of the epidemiological studies.

Antibacterial surfaces developed from bio-inspired approaches

Prevention of bacterial adhesion and biofilm formation on the surfaces of materials is a topic of major medical and societal importance. Various synthetic approaches based on immobilization or release of bactericidal substances such as metal derivatives, polyammonium salts and antibiotics were extensively explored to produce antibacterial coatings. Although providing encouraging results, these approaches suffer from the use of active agents which may be associated with side-effects such as cytotoxicity, hypersensibility, inflammatory responses or the progressive alarming phenomenon of antibiotic resistance. In addition to these synthetic approaches, living organisms, e.g. animals and plants, have developed fascinating strategies over millions of years to prevent efficiently the colonization of their surfaces by pathogens. These strategies have been recently mimicked to create a new generation of bio-inspired biofilm-resistant surfaces. In this review, we discuss some of these bio-inspired methods devoted to the development of antibiofilm surfaces. We describe the elaboration of antibacterial coatings based on natural bactericidal substances produced by living organisms such as antimicrobial peptides, bacteriolytic enzymes and essential oils. We discuss also the development of layers mimicking algae surfaces and based on anti-quorum-sensing molecules which affect cell-to-cell communication. Finally, we report on very recent strategies directly inspired from marine animal life and based on surface microstructuring.

Disinfection by-product formation and mutagenic assay caused by preozonation of groundwater containing bromide

Brominated organic and inorganic by-products are generated during ozonation of groundwater containing high bromide concentrations. This study measured concentrations of bromate, bromoform, bromoacetic acids, bromoacetonitriles, bromoacetone, 2,4-dibromophenol and aldehyde generated by ozonation. The potential mutagenicity of ozonated waters was assessed using the Ames and Microtox tests. Test results for the 18 ozonated groundwater samples demonstrate that bromate formation is associated with high pH, bromide and alkalinity content, low levels of dissolved organic carbon (DOC) and ammonia, and low alkalinity. Brominated organic by-products were correlated with high bromide ion and natural organic matter content, and low ammonia concentrations. The Ames test results demonstrate that all extracts from ozonated water have mutagenic activity; however, the 18 raw groundwater samples had no mutagenicity. The Microtox test results also show that the ozonated water samples were highly toxic. Generally, both bromide and DOC content promoted the formation of ozonation by-products and mutagenicity. Controlling of bromide and DOC concentrations is an effective method of reducing potential by-product formation and eliminating mutagenicity problems associated with groundwater ozonation.

Formation of polybrominated and polychlorinated ethylphenoxyethylphenols (PXEPEPs) during aqueous chlorination of 4-ethylphenol solutions in the presence of bromide ions

This investigation was undertaken to determine the effect of the bromide concentration on the formation of polyhalogenated ethylphenoxyethylphenols (PXEPEPs), including predioxins, during the chlorination of 4-ethylphenol in solution. An aqueous solution of 4-ethylphenol was treated with hypochlorite in the presence of various concentrations of bromide ions. The changes in the compositions of the halogenated products in hexane extracts of the chlorinated solution were analyzed by gas chromatograph (GC) and a flame ionization detector (FID) and mass spectrometry (MS). 4-ethylphenol was shown to from several halogenated compounds, including PXEPEPs, as by-products of chlorination. The number of substituted chlorine or bromine atoms ranged from 0 to 4. The formation of bromine-substituted PXEPEPs was observed in the presence of 0.1 equivalents of bromide ions per mole of 4-ethylphenol. The number of substituted bromine atoms increased with the amount of co-existing bromide ions. In the presence of more than one equivalent of bromide ions per mole of 4-ethylphenol, the number of bromine atoms substituted in the PXEPEPs increased, whereas the number of chlorine atoms substituted in the PXEPEPs decreased. GC-MS total ion chromatograms confirmed the formation of polybrominated and polychlorinated predioxins during the aqueous chlorination of 4-ethylphenol in the presence of bromide ions. However, at ten equivalents of bromide ions per mole of 4-ethylphenol, no predioxins were observed in the hexane extract obtained from the aqueous 4-ethylphenol solution after being treated with chlorine. The formation of PXEPEPs during the chlorination of 4-ethylphenol in the presence of bromide ions was also influenced by the reaction pH.

Determinants of whether or not mixtures of disinfection by-products are similar

Reactive chemicals have been used to disinfect drinking waters for over a century. In the 1970s, it was first observed that the reaction of these chemicals with the natural organic matter (NOM) in source waters results in the production of variable, complex mixtures of disinfection by-products (DBP). Because limited toxicological and epidemiological data are available to assess potential human health risks from complex DBP mixture exposures, methods are needed to determine when health effects data on a specific DBP mixture may be used as a surrogate for evaluating another environmental DBP mixture of interest. Before risk assessors attempt such efforts, a set of criteria needs to be in place to determine whether two or more DBP mixtures are similar in composition and toxicological potential. This study broadly characterizes the chemical and toxicological measures that may be used to evaluate similarities among DBP mixtures. Variables are discussed that affect qualitative and quantitative shifts in the types of DBP that are formed, including disinfectants used, their reactions with NOM and with bromide/iodide, pH, temperature, time, and changes in the water distribution system. The known toxicological activities of DBP mixtures and important single DBPs are also presented in light of their potential for producing similar toxicity. While DBP exposures are associated with a number of health effects, this study focuses on (1) mutagenic activity of DBP mixtures, (2) DBP cancer epidemiology, and (3) toxicology studies to evaluate similarity among DBP mixtures. Data suggest that further chemical characterization of DBP mixtures and more systematic study of DBP toxicology will improve the quality and usefulness of similarity criteria.

Carcinogenicity of the chlorination disinfection by-product MX

3-Chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone, better known by its historical name 'mutagen X' or MX, is a chlorination disinfection byproduct that forms from the reaction of chlorine and humic acids in raw water. MX has been measured in drinking water samples in several countries at levels that ranged from non-detectable to 310 ng/L. Although the concentration of MX in drinking water is typically 100- to 1000-fold lower than other common chlorinated by-products of concern (e.g., trihalomethanes), some have hypothesized that MX might play a role in the increased cancer risks that have been associated with the consumption of chlorinated water. This hypothesis is based on observations that MX, in some test systems, is extremely potent relative to trihalomethanes in inducing DNA damage and altering pathways involved in cell growth, and that in some epidemiological studies increased cancer rates are associated with the bacterial mutagenicity of disinfected water of which MX contributes a significant portion. MX also appears to be more potent than other chlorination by-products in causing cancer in animals. This article reviews the available evidence on the carcinogenicity of MX. MX induced cancer at multiple sites in male and female rats, acted as a tumor initiator and promoter, enhanced tumor yields in genetically modified rodents, induced a myriad of genotoxic effects in numerous in vitro and in vivo test systems, and was a potent inhibitor of gap junction intercellular communication. Although the precise mechanism of MX-induced DNA damage is not known, MX is able to cause DNA damage through an unusual mechanism of ionizing DNA bases due to its extremely high reductive potential. MX may also cause mutations through DNA adduction. This article develops a mean cancer potency estimate for MX of 2.3 (mg/kg-d)(-1) and an upper 95% percentile estimate of 4.5 (mg/kg-d)(-1), and examines the potential health risks posed by this chlorination contaminant in drinking water. A discussion of additional data that would be desirable to better characterize the risks posed by MX and other halogenated hydroxyfuranones follows.

Furanones as potential anti-bacterial coatings on biomaterials

A major barrier to the long-term use of medical devices is development of infection. Staphylococcus epidermidis is one of the most common bacterial isolates from these infections with biofilm formation being their main virulence factor. Currently, antibiotics are used as the main form of therapy. However with the emergence of staphylococcal resistance, this form of therapy is fast becoming ineffective. In this study, the ability of a novel furanone antimicrobial compound to inhibit S. epidermidis adhesion and slime production on biomaterials was assessed. Furanones were physically adsorbed to various biomaterials and bacterial load determined using radioactivity. Slime production was assessed using a colorimetric method. Additionally, the effect of the furanone coating on material surface characteristics such as hydrophobicity and surface roughness was also investigated. The results of this study indicated that there was no significant change in the material characteristics after furanone coating. Bacterial load on all furanone-coated materials was significantly reduced (p<0.001) as was slime production (p<0.001). There is a potential for furanone-coated biomaterials to be used to reduce medical device-associated infections.

Matrix effects in the gas chromatographic–mass spectrometric determination of brominated analogues of 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone

Brominated analogues (BMXs) of the strong drinking water mutagen MX (3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone) were found to be subject to strong matrix induced chromatographic response enhancement effects. We evaluated different ways to reduce errors in quantification including comparison of gas chromatographic inlet systems, improved clean up of sample extracts, and preparation of calibration standards in the sample matrix. The best quantitative accuracy and long term performance were achieved when the calibration standards were prepared in sample matrix, samples were cleaned up with C18-resin in conjunction with solid phase extraction (SPE) with Oasis HLB cartridges, and gas chromatography with PTV splitless injection was used. This method enables the determination of MX and BMXs from 500 ml water sample with quantitation limits of 1 ng/l or less.

Bromide affecting drinking water mutagenicity

The effect of bromide on the mutagenicity of artificially recharged groundwater and purified artificially recharged groundwater after chlorine, ozone, hydrogen peroxide, permanganate, and UV treatments alone and in various combinations was studied. The highest mutagenicity was observed after chlorination, while hydrogen peroxide-ozone-chlorine treatment produced the lowest value for both waters. Chlorinated waters, which were spiked with bromide, had up to 3.7 times more mutagenic activity than waters without bromide after every preoxidation method. 3-Chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX) was found to correspond as much as 76% of the overall mutagenicity in the waters not spiked with bromide. MX formation was found to be lower when the treated water contained bromide, implicating the formation of brominated MX analogues. Trihalomethane formation increased when the treated water contained bromide.

Halogenated 2,5-pyrrolidinediones: synthesis, bacterial mutagenicity in Ames tester strain TA-100 and semi-empirical molecular orbital calculations

The chloroimide 3,3-dichloro-4-(dichloromethylene)-2,5-pyrrolidinedione, a tetrachloroitaconimide, is the principal mutagen produced by chlorination of simulated poultry chiller water. It is the second most potent mutagenic disinfection by-product of chlorination ever reported. Six of seven new synthetic analogs of this compound are direct-acting mutagens in Ames tester strain TA-100. Computed energies of the lowest unoccupied molecular orbital (E(LUMO)) and of the radical anion stability (DeltaH(f)(rad)-DeltaH(f)) from MNDO-PM3 for the chloroimides show a quantitative correlation with the Ames TA-100 bacterial mutagenicity values. The molar mutagenicities of these direct acting mutagenic imides having an exocyclic double bond fit the same linear correlation (lnM(m) vs. E(LUMO); lnM(m) vs. DeltaH(f)(rad)--DeltaH(f)) as the chlorinated 2(5H)-furanones, including the potent mutagen MX, 3-chloro-4-(dichloro-methyl)-5-hydroxy-2(5H)-furanone, a by-product of water chlorination and paper bleaching with chlorine. Mutagenicity data for related haloimides having endocyclic double bonds are also given. For the same number of chlorine atoms, the imides with endocyclic double bonds have significantly higher Ames mutagenicity compared to their structural analogs with exocyclic double bonds, but do not follow the same E(LUMO) or DeltaH(f)(rad)-DeltaH(f) correlation as the exocyclic chloroimides and the chlorinated 2(5H)-furanones.

Comparable DNA and chromosome damage in Chinese hamster ovary cells by chlorohydroxyfuranones

Chlorinated drinking water contains several chlorohydroxyfuranone (CHF) by-products whose contribution to cancer risk is not presently known. 3,4-Dichloro-5-hydroxy-2(5H)-furanone (MCA), 3-chloro-4-(chloromethyl)-5-hydroxy-2(5H)-furanone (CMCF), and 3- chloro-4-methyl-5-hydroxy-2(5H)-furanone (MCF) were studied for the induction of DNA damage, using the alkaline single-cell gel (SCG)/comet assay, and for chromosome damage, using sister-chromatid exchange (SCE) and chromosome aberration (CA) tests, in Chinese hamster ovary (CHO) cells. 3-Chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX), the known genotoxic chlorination by-product and a rat carcinogen, was used as a reference chemical. The SCG analyses were done using concentrations that caused little or no cytotoxicity compared to that of the concurrent control cultures. In the cytogenetic tests, the CHFs were tested up to maximum cytotoxicity. MX and MCA were the most cytotoxic of the compounds in CHO cells followed by CMCF and MCF. All of the CHFs induced DNA damage, SCEs and CAs (mainly chromatid-type breaks and exchanges) in a concentration-related manner, with the exception that MCA was a weak inducer of SCEs. There were no significant differences between the lowest concentration of MX, MCA, and CMCF to cause DNA damage (SCG assay). Based on comparisons of the slopes of regression lines, MX was somewhat more potent than either MCA or CMCF, and MCF was clearly less potent than the other three compounds in the assay. The order of potency was MX > CMCF > MCA > MCF in inducing SCEs and MX > MCA > CMCF > MCF in inducing CAs. The data show that there are differences in the potency of genotoxicity among the CHFs tested. In many cases, however, the extent of maximum effect observed was comparable between the compounds. The results suggest that besides MX other CHFs should be considered in the evaluation of genotoxic risks associated with the consumption of chlorinated drinking water.

Frontier orbital energies, hydrophobicity and steric factors as physical QSAR descriptors of molecular mutagenicity. A review with a case study: MX compounds

A review on QSARs (Quantitative Structure-Activity Relationships) in modelling molecular mutagenicity is given. The importance of hydrophobicity, frontier orbital (HOMO and LUMO) energies and steric factors as physical descriptors of mutagenicity is emphasized. In addition, some possible connections between QSAR models and the general electrophilic theory of genotoxic activity are discussed. As a detailed example, QSARs for the Ames Salmonella typhimurium TA100 mutagenicity of halogenated hydroxyfuranones including MX, one of the most potent bacterial mutagens ever identified, are discussed and a plausible mechanism for their mutagenic activity is proposed.