1
|
De Ornelas B, Sucato V, Vadalà G, Buono A, Galassi AR. Myocardial Bridge and Atherosclerosis, an Intimal Relationship. Curr Atheroscler Rep 2024:10.1007/s11883-024-01219-1. [PMID: 38822987 DOI: 10.1007/s11883-024-01219-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 05/18/2024] [Indexed: 06/03/2024]
Abstract
PURPOSE OF REVIEW This review investigates the relationship between myocardial bridges (MBs), intimal thickening in coronary arteries, and Atherosclerotic cardiovascular disease. It focuses on the role of mechanical forces, such as circumferential strain, in arterial wall remodeling and aims to clarify how MBs affect coronary artery pathology. REVIEW FINDINGS MBs have been identified as influential in modulating coronary artery intimal thickness, demonstrating a protective effect against thickening within the MB segment and an increase in thickness proximal to the MB. This is attributed to changes in mechanical stress and hemodynamics. Research involving arterial hypertension models and vein graft disease has underscored the importance of circumferential strain in vascular remodeling and intimal hyperplasia. Understanding the complex dynamics between MBs, mechanical strain, and vascular remodeling is crucial for advancing our knowledge of coronary artery disease mechanisms. This could lead to improved management strategies for cardiovascular diseases, highlighting the need for further research into MB-related vascular changes.
Collapse
Affiliation(s)
- Benjamin De Ornelas
- Department of Health Promotion, Mother and Child Care, Internal Medicine and Medical Specialties, University of Palermo, Palermo, Italy.
| | - Vincenzo Sucato
- Department of Health Promotion, Mother and Child Care, Internal Medicine and Medical Specialties, University of Palermo, Palermo, Italy
| | - Giuseppe Vadalà
- Division of Cardiology, University Hospital "P. Giaccone", Palermo, Italy
| | - Andrea Buono
- Interventional Cardiology Unit, Cardiovascular Department, Fondazione Poliambulanza Institute, Brescia, Italy
| | - Alfredo Ruggero Galassi
- Department of Health Promotion, Mother and Child Care, Internal Medicine and Medical Specialties, University of Palermo, Palermo, Italy
| |
Collapse
|
2
|
Sparks AJ, Smith CM, Allman AB, Senko JL, Meess KM, Ducharme RW, Springer ME, Waqas M, Siddiqui AH. Compliant vascular models 3D printed with the Stratasys J750: a direct characterization of model distensibility using intravascular ultrasound. 3D Print Med 2021; 7:28. [PMID: 34477997 PMCID: PMC8414686 DOI: 10.1186/s41205-021-00114-8] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2020] [Accepted: 07/03/2021] [Indexed: 11/18/2022] Open
Abstract
PURPOSE The purpose of this study is to evaluate biomechanical accuracy of 3D printed anatomical vessels using a material jetting printer (J750, Stratasys, Rehovot, Israel) by measuring distensibility via intravascular ultrasound. MATERIALS AND METHODS The test samples are 3D printed tubes to simulate arterial vessels (aorta, carotid artery, and coronary artery). Each vessel type is defined by design geometry of the vessel inner diameter and wall thickness. Vessel inner diameters are aorta = 30mm, carotid = 7mm, and coronary = 3mm. Vessel wall thickness are aorta = 3mm, carotid = 1.5mm, and coronary = 1mm. Each vessel type was printed in 3 different material options. Material options are user-selected from the J750 printer software graphical user interface as blood vessel wall anatomy elements in 'compliant', 'slightly compliant', and 'rigid' options. Three replicates of each vessel type were printed in each of the three selected material options, for a total of 27 models. The vessels were connected to a flow loop system where pressure was monitored via a pressure wire and cross-sectional area was measured with intravascular ultrasound (IVUS). Distensibility was calculated by comparing the % difference in cross-sectional area vs. pulse pressure to clinical literature values. Target clinical ranges for normal and diseased population distensibility are 10.3-44 % for the aorta, 5.1-10.1 % for carotid artery, and 0.5-6 % for coronary artery. RESULTS Aorta test vessels had the most clinically representative distensibility when printed in user-selected 'compliant' and 'slightly compliant' material. All aorta test vessels of 'compliant' material (n = 3) and 2 of 3 'slightly compliant' vessels evaluated were within target range. Carotid vessels were most clinically represented in distensibility when printed in 'compliant' and 'slightly compliant' material. For carotid test vessels, 2 of 3 'compliant' material samples and 1 of 3 'slightly compliant' material samples were within target range. Coronary arteries were most clinically represented in distensibility when printed in 'slightly compliant' and 'rigid' material. For coronary test vessels, 1 of 3 'slightly compliant' materials and 3 of 3 'rigid' material samples fell within target range. CONCLUSIONS This study suggests that advancements in materials and 3D printing technology introduced with the J750 Digital Anatomy 3D Printer can enable anatomical models with clinically relevant distensibility.
Collapse
Affiliation(s)
| | | | | | | | | | | | | | - Muhammad Waqas
- Department of Neurosurgery, University at Buffalo, State University of New York, 100 High Street, Suite B4, Buffalo, NY, 14203, USA
| | - Adnan H Siddiqui
- The Jacobs Institute, Buffalo, New York, USA.
- Department of Neurosurgery, University at Buffalo, State University of New York, 100 High Street, Suite B4, Buffalo, NY, 14203, USA.
- Canon Stroke and Vascular Research Center, University at Buffalo, State University of New York, Buffalo, New York, USA.
| |
Collapse
|
3
|
Solazzo M, O'Brien FJ, Nicolosi V, Monaghan MG. The rationale and emergence of electroconductive biomaterial scaffolds in cardiac tissue engineering. APL Bioeng 2019; 3:041501. [PMID: 31650097 PMCID: PMC6795503 DOI: 10.1063/1.5116579] [Citation(s) in RCA: 56] [Impact Index Per Article: 11.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/25/2019] [Accepted: 09/16/2019] [Indexed: 02/07/2023] Open
Abstract
The human heart possesses minimal regenerative potential, which can often lead to chronic heart failure following myocardial infarction. Despite the successes of assistive support devices and pharmacological therapies, only a whole heart transplantation can sufficiently address heart failure. Engineered scaffolds, implantable patches, and injectable hydrogels are among the most promising solutions to restore cardiac function and coax regeneration; however, current biomaterials have yet to achieve ideal tissue regeneration and adequate integration due a mismatch of material physicochemical properties. Conductive fillers such as graphene, carbon nanotubes, metallic nanoparticles, and MXenes and conjugated polymers such as polyaniline, polypyrrole, and poly(3,4-ethylendioxythiophene) can possibly achieve optimal electrical conductivities for cardiac applications with appropriate suitability for tissue engineering approaches. Many studies have focused on the use of these materials in multiple fields, with promising effects on the regeneration of electrically active biological tissues such as orthopedic, neural, and cardiac tissue. In this review, we critically discuss the role of heart electrophysiology and the rationale toward the use of electroconductive biomaterials for cardiac tissue engineering. We present the emerging applications of these smart materials to create supportive platforms and discuss the crucial role that electrical stimulation has been shown to exert in maturation of cardiac progenitor cells.
Collapse
|
4
|
Pagiatakis C, Tardif JC, L'Allier PL, Mongrain R. Effect of stenosis eccentricity on the functionality of coronary bifurcation lesions-a numerical study. Med Biol Eng Comput 2017; 55:2079-2095. [PMID: 28500478 DOI: 10.1007/s11517-017-1653-7] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/13/2016] [Accepted: 04/25/2017] [Indexed: 01/10/2023]
Abstract
Interventional cardiologists still rely heavily on angiography for the evaluation of coronary lesion severity, despite its poor correlation with the presence of ischemia. In order to improve the accuracy of the current diagnostic procedures, an understanding of the relative influence of geometric characteristics on the induction of ischemia is required. This idea is especially important for coronary bifurcation lesions (CBLs), whose treatment is complex and is associated with high rates of peri- and post-procedural clinical events. Overall, it is unclear which geometric and morphological parameters of CBLs influence the onset of ischemia. More specifically, the effect of stenosis eccentricity is unknown. Computational fluid dynamic simulations, under a geometric multiscale framework, were executed for seven CBL configurations within the left main coronary artery bifurcation. Both concentric and eccentric stenosis profiles of mild to severe constriction were considered. By using a geometric multiscale framework, the fractional flow reserve, which is the gold-standard clinical diagnostic index, could be calculated and was compared between the eccentric and concentric profiles for each case. The results suggested that for configurations where the supplying vessel is stenosed, eccentricity could have a notable effect on and therefore be an important factor that influences configuration functionality.
Collapse
Affiliation(s)
- Catherine Pagiatakis
- Department of Mechanical Engineering, McGill University, 817 Sherbrooke Street West, Montreal, Quebec, H3A 0C3, Canada. .,Montreal Heart Institute, 5000 Belanger Street, Montreal, Quebec, H1T 1C8, Canada.
| | - Jean-Claude Tardif
- Montreal Heart Institute, 5000 Belanger Street, Montreal, Quebec, H1T 1C8, Canada.,Faculty of Medicine, Université de Montréal - Pavillon Roger-Gaudry, 2900 Edouard-Montpetit Boulevard, Montreal, Quebec, H3T 1J4, Canada
| | - Philippe L L'Allier
- Montreal Heart Institute, 5000 Belanger Street, Montreal, Quebec, H1T 1C8, Canada.,Faculty of Medicine, Université de Montréal - Pavillon Roger-Gaudry, 2900 Edouard-Montpetit Boulevard, Montreal, Quebec, H3T 1J4, Canada
| | - Rosaire Mongrain
- Department of Mechanical Engineering, McGill University, 817 Sherbrooke Street West, Montreal, Quebec, H3A 0C3, Canada.,Montreal Heart Institute, 5000 Belanger Street, Montreal, Quebec, H1T 1C8, Canada
| |
Collapse
|
5
|
Finn R, Morris L. An experimental assessment of catheter trackability forces with tortuosity parameters along patient-specific coronary phantoms. Proc Inst Mech Eng H 2016; 230:153-65. [PMID: 26721906 DOI: 10.1177/0954411915623815] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2015] [Accepted: 12/01/2015] [Indexed: 11/15/2022]
Abstract
Coronary artery disease is one of the leading causes of cardiovascular deaths worldwide. Approximately 70% of patients requiring coronary revascularisation receive endovascular stents. The endovascular procedure is the preferred option due to its minimally invasive nature when compared to open heart surgery. Stent delivery is paramount for the success of the endovascular procedure. Catheter delivery forces within tortuous blood vessels can produce vasoconstriction and injury, resulting in reactive intimal proliferation or distal embolisation associated with end-organ ischaemia and infarction. Trackability is evaluated by most medical device companies for further development of their delivery systems. Relevant device design attributes must be tested in settings which simulate aspects of the intended use conditions, such as vessel geometry and compliance. Various tortuosity parameters are used to facilitate endovascular intervention planning. This study assessed the significance and correlation between the trackability forces for a coronary stent system with various geometrical parameters based on patient-specific geometries. A motorised delivery system delivered a commercially available coronary stent system and monitored the trackability forces along three phantom patient-specific thin-walled, compliant coronary vessels supported by a cardiac phantom model. The maximum trackability forces, curvature and torsion values ranged from 0.31 to 0.87 N, 0.06 to 0.22 mm(-1) and -11.1 to 5.8 mm(-1), respectively. The trackability forces were significantly different between all vessels (p < 0.002), while the tortuosity parameters were not significantly different (p > 0.05). A new tortuosity parameter-coined tracking curvature which considers the lumen radius as well as the curvature along the centreline was statistically different (p < 0.002) for all vessels and correlated with the trackability forces. There was a strong correlation between the cumulative trackability force and the cumulative tracking curvature. Tracking curvature could be used as a predictive clinical tool to aid stent delivery to the vicinity of the lesion.
Collapse
Affiliation(s)
- Ronan Finn
- Galway Medical Technologies Centre (GMedTech), Department of Mechanical and Industrial Engineering, Galway-Mayo Institute of Technology, Galway, Ireland
| | - Liam Morris
- Galway Medical Technologies Centre (GMedTech), Department of Mechanical and Industrial Engineering, Galway-Mayo Institute of Technology, Galway, Ireland
| |
Collapse
|
6
|
Experimental and constitutive modeling approaches for a study of biomechanical properties of human coronary arteries. J Mech Behav Biomed Mater 2015; 50:1-12. [DOI: 10.1016/j.jmbbm.2015.05.021] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/19/2015] [Revised: 05/19/2015] [Accepted: 05/21/2015] [Indexed: 11/23/2022]
|
7
|
Morris L, Fahy P, Stefanov F, Finn R. The Effects That Cardiac Motion has on Coronary Hemodynamics and Catheter Trackability Forces for the Treatment of Coronary Artery Disease: An In Vitro Assessment. Cardiovasc Eng Technol 2015; 6:430-49. [PMID: 26577477 DOI: 10.1007/s13239-015-0241-y] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 03/19/2015] [Accepted: 08/06/2015] [Indexed: 01/09/2023]
Abstract
The coronary arterial tree experiences large displacements due to the contraction and expansion of the cardiac muscle and may influence coronary haemodynamics and stent placement. The accurate measurement of catheter trackability forces within physiological relevant test systems is required for optimum catheter design. The effects of cardiac motion on coronary flowrates, pressure drops, and stent delivery has not been previously experimentally assessed. A cardiac simulator was designed and manufactured which replicates physiological coronary flowrates and cardiac motion within a patient-specific geometry. A motorized delivery system delivered a commercially available coronary stent system and monitored the trackability forces along three phantom patient-specific thin walled compliant coronary vessels supported by a dynamic cardiac phantom model. Pressure drop variation is more sensitive to cardiac motion than outlet flowrates. Maximum pressure drops varied from 7 to 49 mmHg for a stenosis % area reduction of 56 to 90%. There was a strong positive linear correlation of cumulative trackability force with the cumulative curvature. The maximum trackability forces and curvature ranged from 0.24 to 0.87 N and 0.06 to 0.22 mm(-1) respectively for all three vessels. There were maximum and average percentage differences in trackability forces of (23-49%) and (1.9-5.2%) respectively when comparing a static pressure case with the inclusion of pulsatile flow and cardiac motion. Cardiac motion with pulsatile flow significantly altered (p value <0.001) the trackability forces along the delivery pathways with high local percentage variations and pressure drop measurements.
Collapse
Affiliation(s)
- Liam Morris
- Galway Medical Technologies Centre, Department of Mechanical and Industrial Engineering, Galway Mayo Institute of Technology, Galway, Ireland.
| | - Paul Fahy
- Galway Medical Technologies Centre, Department of Mechanical and Industrial Engineering, Galway Mayo Institute of Technology, Galway, Ireland
| | - Florian Stefanov
- Galway Medical Technologies Centre, Department of Mechanical and Industrial Engineering, Galway Mayo Institute of Technology, Galway, Ireland
| | - Ronan Finn
- Galway Medical Technologies Centre, Department of Mechanical and Industrial Engineering, Galway Mayo Institute of Technology, Galway, Ireland
| |
Collapse
|
8
|
Zheng S, Jianjian W. Compensation of in-plane rigid motion for in vivo intracoronary ultrasound image sequence. Comput Biol Med 2013; 43:1077-85. [DOI: 10.1016/j.compbiomed.2013.05.004] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/07/2012] [Revised: 05/03/2013] [Accepted: 05/06/2013] [Indexed: 11/29/2022]
|
9
|
Keyes JT, Lockwood DR, Utzinger U, Montilla LG, Witte RS, Vande Geest JP. Comparisons of planar and tubular biaxial tensile testing protocols of the same porcine coronary arteries. Ann Biomed Eng 2012; 41:1579-91. [PMID: 23132151 DOI: 10.1007/s10439-012-0679-0] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2012] [Accepted: 10/09/2012] [Indexed: 01/13/2023]
Abstract
To identify the orthotropic biomechanical behavior of arteries, researchers typically perform stretch-pressure-inflation tests on tube-form arteries or planar biaxial testing of splayed sections. We examined variations in finite element simulations (FESs) driven from planar or tubular testing of the same coronary arteries to determine what differences exist when picking one testing technique vs. another. Arteries were tested in tube-form first, then tested in planar-form, and fit to a Fung-type strain energy density function. Afterwards, arteries were modeled via finite element analysis looking at stress and displacement behavior in different scenarios (e.g., tube FESs with tube- or planar-driven constitutive models). When performing FESs of tube inflation from a planar-driven constitutive model, pressure-diameter results had an error of 12.3% compared to pressure-inflation data. Circumferential stresses were different between tube- and planar-driven pressure-inflation models by 50.4% with the planar-driven model having higher stresses. This reduced to 3.9% when rolling the sample to a tube first with planar-driven properties, then inflating with tubular-driven properties. Microstructure showed primarily axial orientation in the tubular and opening-angle configurations. There was a shift towards the circumferential direction upon flattening of 8.0°. There was also noticeable collagen uncrimping in the flattened tissue.
Collapse
Affiliation(s)
- Joseph T Keyes
- Graduate Interdisciplinary Program in Biomedical Engineering, The University of Arizona, P.O. Box 210119, Tucson, AZ 85721-0119, USA
| | | | | | | | | | | |
Collapse
|
10
|
Atienza JM. Response of human coronary arteries at different mechanical conditions. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2011; 2010:3585-8. [PMID: 21096835 DOI: 10.1109/iembs.2010.5627456] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
The lack of reliable mechanical data on coronary arteries hampers the application of numerical models to vascular problems, and precludes physicians from knowing in advance the response of coronary arteries to the different interventions. In this work, the mechanical properties of human coronary arteries have been characterized. Whole samples from human right (RC) and left anterior descending (LAD) coronary arteries aged between 23 and 83 years have been studied by means of in-vitro tensile testing up to failure. Knowledge of the mechanical response of human coronary arteries could be applied to optimize the election of vascular grafts or to prevent arterial damage during angioplasty.
Collapse
Affiliation(s)
- J M Atienza
- Materials Science Department of the Technical University of Madrid, 28040, Spain.
| |
Collapse
|
11
|
Claes E, Atienza JM, Guinea GV, Rojo FJ, Bernal JM, Revuelta JM, Elices M. Mechanical properties of human coronary arteries. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2011; 2010:3792-5. [PMID: 21096878 DOI: 10.1109/iembs.2010.5627560] [Citation(s) in RCA: 25] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
The lack of reliable mechanical data on coronary arteries and, more specifically, on their wall strength hampers the application of numerical models and simulations to vascular problems, and precludes physicians from knowing in advance the response of coronary arteries to the different interventions. Studies of the mechanical properties of coronary arteries have been carried out almost exclusively on animals. Only a few studies have tried to characterize the in vivo behavior of human coronaries through tests under physiological conditions. In this work, the mechanical properties of human coronary arteries have been characterized. Whole samples from human right (RC) and left anterior descending (LAD) coronary arteries aged between 23 and 83 years have been studied by means of in-vitro tensile testing up to failure.
Collapse
Affiliation(s)
- E Claes
- Materials Science Department of the Technical University of Madrid, 28040, Spain
| | | | | | | | | | | | | |
Collapse
|
12
|
Hoskins PR, Hardman D. Three-dimensional imaging and computational modelling for estimation of wall stresses in arteries. Br J Radiol 2009; 82 Spec No 1:S3-17. [DOI: 10.1259/bjr/96847348] [Citation(s) in RCA: 26] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022] Open
|
13
|
Modelling of image-catheter motion for 3-D IVUS. Med Image Anal 2008; 13:91-104. [PMID: 18675579 DOI: 10.1016/j.media.2008.06.012] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2007] [Revised: 06/13/2008] [Accepted: 06/19/2008] [Indexed: 11/23/2022]
Abstract
Three-dimensional intravascular ultrasound (IVUS) allows to visualize and obtain volumetric measurements of coronary lesions through an exploration of the cross sections and longitudinal views of arteries. However, the visualization and subsequent morpho-geometric measurements in IVUS longitudinal cuts are subject to distortion caused by periodic image/vessel motion around the IVUS catheter. Usually, to overcome the image motion artifact ECG-gating and image-gated approaches are proposed, leading to slowing the pullback acquisition or disregarding part of IVUS data. In this paper, we argue that the image motion is due to 3-D vessel geometry as well as cardiac dynamics, and propose a dynamic model based on the tracking of an elliptical vessel approximation to recover the rigid transformation and align IVUS images without loosing any IVUS data. We report an extensive validation with synthetic simulated data and in vivo IVUS sequences of 30 patients achieving an average reduction of the image artifact of 97% in synthetic data and 79% in real-data. Our study shows that IVUS alignment improves longitudinal analysis of the IVUS data and is a necessary step towards accurate reconstruction and volumetric measurements of 3-D IVUS.
Collapse
|
14
|
Carboni M, Desch GW, Weizsäcker HW. Passive mechanical properties of porcine left circumflex artery and its mathematical description. Med Eng Phys 2007; 29:8-16. [PMID: 16497534 DOI: 10.1016/j.medengphy.2006.01.004] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2005] [Revised: 12/02/2005] [Accepted: 01/16/2006] [Indexed: 10/25/2022]
Abstract
The aim of this study was to analyze the pseudoelastic behavior of the coronary wall in vitro and to describe this behavior with three alternative strain energy functions frequently used in arterial mechanics. Six tubular segments of artery were subjected to various levels of simultaneous transmural pressure and axial force encompassing the physiological range of loading. Measured data on force, pressure, stress-free geometry and vessel deformation were used to compute components of the Green strain tensor and to determine by least squares fit the values of constants appearing in the following strain energy functions: Fung's exponential function, a combined polynomial-exponential form and a neo-Hookean plus exponential expression. The results obtained showed large biological variability. A comparison of the relative magnitude of the strain components did not reveal significant deviations from orthotropy under the given experimental conditions, hence shear terms were not included in the present constitutive formulations. The deformational behavior of the coronary artery displayed the high non-linearity typical for arteries of the muscular type. For states of equibiaxial stress the corresponding strains in the axial direction were larger than those in the circumferential direction, at least for loads in the upper and physiological range. All these aspects of coronary elasticity were mimicked fairly well by all three functions, although with slightly different degrees of accuracy.
Collapse
Affiliation(s)
- Mosé Carboni
- Institute of Physiology, Center for Physiological Medicine, Medical University of Graz, Harrachgasse 21/5, A-8010 Graz, Austria
| | | | | |
Collapse
|
15
|
Frijlink ME, Goertz DE, Bouakaz A, van der Steen AFW. A simulation study on tissue harmonic imaging with a single-element intravascular ultrasound catheter. THE JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA 2006; 120:1723-31. [PMID: 17004493 DOI: 10.1121/1.2226069] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/12/2023]
Abstract
Recently, in vivo feasibility of tissue harmonic imaging with a mechanically rotated intravascular ultrasound (IVUS) catheter was experimentally demonstrated. To isolate the second harmonic signal content, a combination of pulse inversion and analog filtering was used. In this paper the development of a simulation tool to investigate nonlinear IVUS beams is reported, and the influence of transducer rotation and axial catheter-to-tissue motion on the efficiency of PI signal processing is evaluated. Nonlinear beams were simulated in homogeneous tissue-mimicking media at a transmit frequency of 20 MHz, which resulted in second harmonic pressure fields at 40 MHz. The competing effects of averaging and decorrelation between neighboring rf lines on the signal-to-noise ratio (SNR) were studied for a single point scatterer. An optimal SNR was achieved when lines were combined over 3 degrees - 3.75 degrees. When the transducer was rotated with respect to point scatterers, simulating the acoustic response of tissue, the fundamental frequency suppression using PI degraded rapidly with increasing interpulse angles. The effect of axial catheter-to-tissue motion on the efficiency of pulse inversion seemed to be of less influence for realistic motion values. The results of this study will aid in the optimization of harmonic IVUS imaging systems.
Collapse
Affiliation(s)
- Martijn E Frijlink
- Biomedical Engineering, Erasmus MC, University Medical Center Rotterdam, The Netherlands
| | | | | | | |
Collapse
|
16
|
Murase Y, Narita Y, Kagami H, Miyamoto K, Ueda Y, Ueda M, Murohara T. Evaluation of Compliance and Stiffness of Decellularized Tissues as Scaffolds for Tissue-Engineered Small Caliber Vascular Grafts Using Intravascular Ultrasound. ASAIO J 2006; 52:450-5. [PMID: 16883127 DOI: 10.1097/01.mat.0000227727.87476.5e] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022] Open
Abstract
This study evaluated the compliance and stiffness of decellularized canine common carotid artery as well as decellularized canine ureter and compared it with that of polytetrafluoroethylene, elastin gel combined with polylactic acid tube, and canine common carotid artery. To calculate the compliance and stiffness, internal diameters and cross-sectional areas were measured according to changes in the intraluminal pressures using intravascular ultrasound in a closed circuit system equipped with a syringe pump. The pressure-area curve, stiffness parameter beta, and diameter compliance were evaluated. Canine common carotid artery and decellularized canine common carotid artery, as well as decellularized canine ureter, showed a compliant response, a J-shaped curve. However, the latter evidenced different characteristics in the low pressure range. Although the cross-sectional area of the elastin gel combined with polylactic acid tube showed some changes, it did not present a J-shape curve. Polytetrafluoroethylene exhibited a noncompliant response.The results in this study have shown that the compliance in the decellularized matrices was maintained after cell extraction, which demonstrated the importance of the remaining matrix structure in the mechanical properties of decellularized tissue. A clear difference between the decellularized matrices and synthetic materials was noted in terms of the compliance, even in materials composed of relatively elastic materials.
Collapse
Affiliation(s)
- Yosuke Murase
- Department of Cardiology, Nagoya University Graduate School of Medicine, Nagoya, Japan
| | | | | | | | | | | | | |
Collapse
|
17
|
Tajaddini A, Kilpatrick DL, Schoenhagen P, Tuzcu EM, Lieber M, Vince DG. Impact of age and hyperglycemia on the mechanical behavior of intact human coronary arteries: an ex vivo intravascular ultrasound study. Am J Physiol Heart Circ Physiol 2004; 288:H250-5. [PMID: 15331362 DOI: 10.1152/ajpheart.00646.2004] [Citation(s) in RCA: 28] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
Abstract
Despite their advantages, percutaneous coronary interventional procedures are less effective in diabetic patients. Changes in the mechanical properties of vascular walls secondary to long-term hyperglycemia as well as other factors such as age may influence coronary distensibility. This investigation is aimed at deciphering the extent of these effects on distensibility of postmortem human coronary arteries in a controlled manner. Excised human left anterior descending (LAD) coronary arteries were obtained within 24 h postmortem. With the use of intravascular ultrasound, vascular deformation was analyzed at midregions of 51 moderate lesions. Intraluminal pressure was systematically altered using a computerized pressure pump system and monitored by a pressure-sensing guidewire. Distensibility, a normalized compliance term, was defined as the change in lumen area normalized by the initial reference area over a given pressure interval. With the use of multivariate analysis and repeated-measures ANOVA, coronary distensibility was independently influenced by hyperglycemia and age (P < 0.05) through the entire pressure range. Within physiological pressure range, distensibility was significantly reduced with age in nonhyperglycemic coronary specimens (10.55 +/- 4.41 vs. 6.99 +/- 2.45, x10(3) kPa(-1), P = 0.01), whereas the hyperglycemic vessels were stiff even in the younger group (7.90 +/- 5.82 vs. 7.20 +/- 3.36, x10(3) kPa(-1), P = 0.79). Similar results were observed with stiffness index and elastic modulus of the arteries. Hyperglycemia and age independently influenced the distensibility of moderately atherosclerotic LAD coronary arteries. The stiffening with age was overshadowed in the hyperglycemic group by as-yet-undetermined factors.
Collapse
Affiliation(s)
- Azita Tajaddini
- Department of Biomedical Engineering/ND20, The Cleveland Clinic Foundation, 9500 Euclid Ave., Cleveland, OH 44195, USA.
| | | | | | | | | | | |
Collapse
|
18
|
Brunette J, Mongrain R, L'Allier P, Bertrand OF, Grégoire J, Tardif JC. Biomechanics of Plaque Rupture: A Global Integration Approach. ACTA ACUST UNITED AC 2003. [DOI: 10.1097/00004669-200307000-00026] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
19
|
Klingensmith JD, Schoenhagen P, Tajaddini A, Halliburton SS, Tuzcu EM, Nissen SE, Vince DG. Automated three-dimensional assessment of coronary artery anatomy with intravascular ultrasound scanning. Am Heart J 2003; 145:795-805. [PMID: 12766735 DOI: 10.1016/s0002-8703(03)00089-9] [Citation(s) in RCA: 36] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
Abstract
BACKGROUND Angiography allows the definition of advanced, severe stages of coronary artery disease, but early atherosclerotic lesions, which do not lead to luminal stenosis, are not identified reliably. In contrast, intravascular ultrasound scanning allows the precise characterization and quantification of a wide range of atherosclerotic lesions, independent of the severity of luminal stenosis. METHODS Three-dimensional (3-D) reconstruction of entire coronary segments is possible with the integration of sequential 2-dimensional tomographic images and allows volumetric analysis of coronary arteries. RESULTS Automated systems able to recognize lumen and vessel borders and to display 3-D images are becoming available. CONCLUSION These systems have the potential for on-line 3-D image reconstruction for clinical decision-making and fast routine volumetric analysis in research studies. This review describes 3-D intravascular ultrasound scanning acquisition, analysis, and processing, and the associated technical challenges.
Collapse
Affiliation(s)
- Jon D Klingensmith
- Department of Biomedical Engineering, Lerner Research Institute, The Cleveland Clinic Foundation, Cleveland, Ohio 44195, USA
| | | | | | | | | | | | | |
Collapse
|
20
|
Tajaddini A, Kilpatrick DL, Vince DG. A novel experimental method to estimate stress-strain behavior of intact coronary arteries using intravascular ultrasound (IVUS). J Biomech Eng 2003; 125:120-3. [PMID: 12661205 DOI: 10.1115/1.1536929] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Most arterial mechanics studies have focused on excised non-coronary vessels, with few studies validating the application of ex-vivo results to in-vivo conditions. A method was developed for testing the mechanical properties of intact left anterior descending coronary arteries under a variety of conditions. Vascular deformation and pressure were simultaneously measured with intravascular ultrasound and a pressure transducer guidewire, respectively. Results suggest the importance of understanding in-vivo factors such as myocardial support, vascular tone and local pressure fluctuations when applying ex-vivo coronary characterization data. With further development, this method can more accurately characterize the true in-vivo constitutive behavior in normal and atherosclerotic coronaries.
Collapse
Affiliation(s)
- Azita Tajaddini
- Department of Biomedical Engineering/ND20 Lerner Research Institute, Cleveland Clinic Foundation, 9500 Euclid Avenue, Cleveland, OH 44195, USA.
| | | | | |
Collapse
|
21
|
Williams MJ, Low CJ, Wilkins GT, Stewart RA. Randomised comparison of the effects of nicardipine and esmolol on coronary artery wall stress: implications for the risk of plaque rupture. Heart 2000; 84:377-82. [PMID: 10995404 PMCID: PMC1729457 DOI: 10.1136/heart.84.4.377] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 11/04/2022] Open
Abstract
OBJECTIVE To determine whether the beta blocker esmolol reduces coronary artery wall stress more than the short acting dihydropyridine calcium antagonist nicardipine. DESIGN Randomised double blind placebo controlled trial. SETTING Tertiary cardiology centre. PATIENTS Patients with coronary artery disease. INTERVENTIONS 20 patients were randomised double blind to an infusion of nicardipine (n = 10) or esmolol (n = 10) titrated to reduce systolic blood pressure by 20 mm Hg. MAIN OUTCOME MEASURES Peak systolic wall circumferential stress. RESULTS Esmolol reduced peak coronary stress by a mean of 0.17 x 10(6) dyn/cm(2) (95% confidence interval (CI) 0.14 to 0.21 x 10(6) dyn/cm(2)) compared with a reduction of 0.07 x 10(6) dyn/cm(2) (95% CI 0.05 to 0.10 x 10(6) dyn/cm(2)) after nicardipine. Peak systolic radius was reduced by 0.04 mm (95% CI 0.03 to 0.06 mm) after esmolol compared with an increase of 0.08 mm (95% CI 0.05 to 0.10 mm) after nicardipine. Heart rate increased by 11.5 beats/min (95% CI 6.9 to 16.2 beats/min) after nicardipine and decreased by 5.3 beats/min (95% CI 1.9 to 8.6 beats/min) after esmolol. CONCLUSIONS Intravenous esmolol is more effective than nicardipine at reducing circumferential coronary artery wall stress.
Collapse
Affiliation(s)
- M J Williams
- Department of Medicine, University of Otago, 201 Great King Street, Dunedin, New Zealand.
| | | | | | | |
Collapse
|