Peptide fusion tags with tryptophan and charged residues for control of protein partitioning in PEG-potassium phosphate aqueous two-phase systems

Two-step recovery process for tryptophan tagged cutinase: Interfacing aqueous two-phase extraction and hydrophobic interaction chromatography

In this work, the interfacing of a poly(ethylene glycol) (PEG)-phosphate aqueous two-phase system with hydrophobic interaction chromatography (HIC) for primary recovery of an intracellular protein was evaluated. As a model protein, a recombinant cutinase furnished with a tryptophan-proline (WP) peptide tag was used and produced intracellularly in Escherichia coli (E. coli). E. coli cell homogenate was partitioned in a two-phase system and the top phase yield, concentration and purity of the tagged ZZ-cutinase-(WP)4 was evaluated as function of polymer sizes, system pH and phase volume ratio. The partition behaviour of cell debris, total protein and endotoxin was also monitored. In the HIC part, the chromatographic yield and purity was investigated with respect to ligand hydrophobicity, dilution of loaded top phase and elution conditions. Based on the results, a recovery process was demonstrated where a PEG 1500-K-Na phosphate salt aqueous two-phase system was interfaced with a HIC column. The interfacing was facilitated by the Trp-tagged peptide. The tagged ZZ-cutinase-(WP)4 was obtained in a PEG-free phase and purified to >95% purity according to silver stained sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gels with a total yield of 83% during the two-step recovery process.

Partitioning of peptide-tagged proteins in aqueous two-phase systems using hydrophobically modified micelle-forming thermoseparating polymer

Genetic engineering has been used to construct hydrophobically modified fusion proteins of cutinase from Fusarium solani pisi and tryptophan-containing peptides. The aim was to enhance the partitioning of the tagged protein in a novel aqueous two-phase system formed by only one water-soluble polymer. The system was based on a hydrophobically modified random copolymer of ethylene oxide (EO) and propylene oxide (PO) units, HM-EOPO, with myristyl groups (C(14)H(29)) at both ends. The HM-EOPO polymer is strongly self-associating and has a lower critical solution temperature (cloud point) at 12 degrees C in water. At temperatures above the cloud point a two-phase system is formed with a water top phase and a polymer-enriched bottom phase. By adding a few percent of hydroxypropyl starch polymer, Reppal PES 200, to the system, it is possible to change the densities of the phases so the HM-EOPO-enriched phase becomes the top phase and Reppal-enriched phase is the bottom phase. Tryptophan-based peptides strongly preferred the HM-EOPO rich phase. The partitioning was increased with increasing length of the peptides. Full effect of the tag as calculated from peptide partitioning data was not found in the protein partitioning. When a short spacer was introduced between the protein and the tag the partitioning was increased, indicating a better exposure to the hydrophobic core of the polymer micelle. By adding a hydrophilic spacer between the protein and trp-tag, it was possible to increase the partitioning of cutinase 10 times compared to wild-type cutinase partitioning. By lowering the pH of the system and addition of NaCl, the partitioning of tagged protein was further increased towards the HM-EOPO phase. After isolating the HM-EOPO phase, the temperature was increased and the protein was back-extracted from the HM-EOPO phase to a fresh water phase.

Production of wild-type and peptide fusion cutinases by recombinant Saccharomyces cerevisiae MM01 strains

This study focused on the growth of Saccha-romyces cerevisiae MM01 recombinant strains and the respective production of three extracellular heterologous cutinases: a wild-type cutinase and two cutinases in which the primary structure was fused with the peptides (WP)(2) and (WP)(4), respectively. Different cultivation and strategies were tested in a 2-L shake flask and a 5-L bioreactor, and the respective cell growth and cutinase production were analyzed and compared for the three yeast strains. The highest cutinase productions and productivities were obtained in the fed-batch culture, where wild-type cutinase was secreted up to a level of cutinase activity per dry cell weight (specific cell activity) of 4.1 Umg(-1) with activity per protein broth (specific activity) of 266 Umg(-1), whereas cutinase-(WP)(2) was secreted with a specific cell activity of 2.1 Umg(-1) with a specific activity of 200 Umg(-1), and cutinase-(WP)(4) with a specific cell activity of 0.7 Umg(-1) with a specific activity of 15 Umg(-1). The results indicate that the fusion of hydrophobic peptides to cutinase that changes the physical properties of the fused protein limits cutinase secretion and subsequently leads to a lower plasmid stability and lower yeast cell growth. These effects were observed under different cultivation conditions (shake flask and bioreactor) and cultivation strategies (batch culture versus fed-batch culture).

Primary recovery of a genetically engineered Trichoderma reesei endoglucanase I (Cel 7B) fusion protein in cloud point extraction systems

Here we present data to demonstrate how partitioning of a hydrophilic enzyme can be directed to the hydrophobic detergent-enriched phase of an aqueous two-phase system by addition of short stretches of amino acid residues to the protein molecule. The target enzyme was the industrially important endoglucanase I, EGI (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4, Cel7B) of Trichoderma reesei. We investigated the partitioning of three EGI variants containing various C-terminal peptide extensions including Trp-Pro motifs of different lengths and localizations. Additionally, a recently developed system composed of the thermoseparating copolymer HM-EOPO was utilized to study the effects of fusion tags. The addition of peptides containing tryptohan residues enhanced the partitioning of EGI to the HM-EOPO-rich phase. The system composed of a nonionic detergent (Agrimul NRE1205) resulted in the highest partition coefficient (K = 31) and yield (90%) with the construct EGI(core-P5)(WP)(4) containing (Trp-Pro)(4) after a short linker stretch. A recombinant strain of T. reesei Rut-C30 for large-scale production was constructed in which the fusion protein EGI(core-P5)(WP)(4) was expressed from the strong promoter of the cellulase gene cbh1. The fusion protein was successfully expressed and secreted from the fungus during shake-flask cultivations. Cultivation in a 28-L bioreactor however, revealed that the fusion protein is sensitive to proteases. Consequently, only low production levels were obtained in large-scale production trials.

Cutinase-peptide fusions in thermoseparating aqueous two-phase systems. Prediction of partitioning and enhanced tag efficiency by detergent addition

It is of increasing importance to develop efficient purification methods for recombinant proteins where the number of steps can be minimised. The aim has been to establish a method for predicting the partitioning of the wild-type target protein in an aqueous two-phase system, and with this as basis, develop fusion tags and optimise the phase system for enhanced partitioning of the target protein. The surface of the lipolytic enzyme cutinase from Fusarium solani pisi was investigated with a computer program, Graphical Representation and Analysis of Surface Properties (GRASP). The accessible surface areas for the different amino acid residues were used together with peptide partitioning data to calculate the partition coefficient for the protein. The separation system was composed of a thermoseparating random copolymer of ethylene oxide and propylene oxide. Breox PAG 50A 1000, as top phase forming polymer and a hydroxypropyl starch polymer, Reppal PES 200, as bottom phase polymer. The calculated partition coefficient for the wild-type protein (K= 1.0) agreed reasonably well with the experimentally determined value (K=0.85). Genetic engineering was used to construct fusion proteins expressed in Saccharomyces cerevisiae based on cutinase and peptide tags containing tryptophan, to enhance the partitioning in aqueous two-phase systems. The partitioning of the cutinase constructs could qualitatively be predicted from peptide partitioning data, i.e. the trends in partitioning could be predicted. A spacer peptide introduced between protein and tag increased the partitioning of the protein towards the ethylene oxide-propylene oxide (EOPO) copolymer top phase. The aqueous two-phase system was modified by addition of detergent to increase the partitioning of the cutinase variants towards the EOPO copolymer phase. Triton and a series of C12En detergents selectively increased the partitioning of cutinase constructs with (WP)4-based tags up to 14 times compared to wild-type cutinase. The protein partition could almost quantitatively be predicted from the peptide partition data.

Functional selection of phage displayed peptides for facilitated design of fusion tags improving aqueous two-phase partitioning of recombinant proteins

Aqueous two-phase systems allow for the unequal distribution of proteins and other molecules in water-rich solutions containing phase separating polymers or surfactants. One approach to improve the partitioning properties of recombinant proteins is to produce the proteins as fused to certain peptide tags. However, the rational design of such tags has proven difficult since it involves a compromise between multivariate parameters such as partitioning properties, solvent accessibility and production/secretion efficiency. In this work, a novel approach for the identification of suitable peptide tag extensions has been investigated. Using the principles of selection, rather than design, peptide sequences contributing to an improved partitioning have been identified using phage display technology. A 40 million member phagemid library of random nona-peptides, displayed as fusion to the major coat protein pVIII of the filamentous phage M13, was employed in the selection of top-phase partitioning phage particles in a PEG/sodium phosphate system. After multiple cycles of selection by partitioning, peptides with high frequencies of both tyrosine and proline residues were found to be over represented in selected clones. The identified peptide sequences, or derivatives thereof, were subsequently individually analyzed for their partitioning behavior as displayed on phage, as free synthetic peptides and as genetically fused to a recombinant model target protein. The results showed that novel peptide sequences capable of enhancing top-phase partitioning without interfering with protein production and secretion indeed could be identified for the aqueous two-phase system investigated.

Extraction of endoglucanase I (Ce17B) fusion proteins from Trichoderma reesei culture filtrate in a poly(ethylene glycol)-phosphate aqueous two-phase system

Endoglucanases (EGI) (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4, Ce17B) of Trichoderma reesei are industrially important enzymes. Thus, there is a great need for development of a primary recovery method suitable for large-scale utilization. In this study we present a concept applicable for large-scale purification of an EGI fusion protein by one-step extraction in a poly(ethylene glycol) PEG-sodium/potassium phosphate aqueous two-phase system. EGI is a two-module enzyme composed of an N-terminal catalytic module and a C-terminal cellulose binding module (CBM) separated by a glycosylated linker region. Partitioning of six different EGI constructs, containing the C-terminal extensions (WP)2, (WP)4 or the amphiphilic protein hydrophobin I (HFB) of T. reesei instead of the CBM were studied to evaluate if any of the fusions could improve the partition coefficient sufficiently to be suitable for large-scale production. All constructs showed improved partitioning in comparison to full length EGI. The (WP)4 extensions resulted in 26- to 60-fold improvement of partition coefficient. Consequently, a relative minor change in amino acid sequence on the two-module protein EGI improved the partition coefficient significantly in the PEG 4000-sodium/potassium phosphate system. The addition of HFBI to EGI clearly enhanced the partition coefficient (K=1.2) in comparison to full-length EGI (K=0.035). Partitioning of the construct with (WP)4 fused to the catalytic module and a short sequence of the linker [EGI(core-P5)(WP)4] resulted in the highest partition coefficient (K=54) and a yield of 98% in the PEG phase. Gel electrophoresis showed that the construct with the (WP)4 tag attached after a penta-proline linker could be purified from the other bulk proteins by only a single-step separation in the PEG 4000-sodium/potassium phosphate system. This is a major improvement in comparison with the previously studied model (ethylene oxide-propylene oxide)-dextran system. Hence, this construct will be suitable for further optimization of the extraction of the enzyme in a PEG 4000-sodium/potassium phosphate system from culture filtrate.

Genetic engineering of the Trichoderma reesei endoglucanase I (Cel7B) for enhanced partitioning in aqueous two-phase systems containing thermoseparating ethylene oxide--propylene oxide copolymers

Endoglucanases (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4) are industrially important enzymes. In this study endoglucanase I (EGI or Cel7B) of the filamentous fungi Trichoderma reesei has been genetically engineered to investigate the influence of tryptophan rich peptide extensions (tags) on partitioning in an aqueous two-phase model system. EGI is a two-domain enzyme and is composed of a N-terminal catalytic domain and a C-terminal cellulose binding domain, separated by a linker. The aim was to find an optimal tag and fusion position, which further could be utilised for large scale extractions. Peptide tags of different length and composition were attached at various localisations of EGI. The fusion proteins were expressed from T. reesei with the use of the gpdA promoter from Aspergillus nidulans. Variations in secreted levels between the engineered proteins were obtained. The partitioning of EGI in an aqueous two-phase system composed of a thermoseparating ethylene oxide-propylene oxide random copolymer (EO(50)PO(50)) and dextran, could be significantly improved by relatively minor genetic engineering. The (Trp-Pro)(4) tag added after a short stretch of the linker, containing five proline residues, gave in the highest partition coefficient of 12.8. The yield in the top phase was 94%. The specific activity was 83% of the specific activity of unmodified EGI on soluble substrate. The efficiency of a tag fused to a protein is shown by the tag efficiency factor (TEF). A hypothetical TEF of 1.0 would indicate full tag exposure and optimal contribution to the protein partitioning by the fused tag. The location of the fusion point after the sequence of five proline residues in the linker of EGI is the most beneficial in two-phase separation. The highest TEF (0.97) was obtained with the (Trp-Pro)(2) tag at this position, indicating full exposure and intactness of the tag. However, the peptide tag composed of (Trp-Pro)(4) improved the partition properties the most but had lower TEF in comparison to (Trp-Pro)(2).

Genetically engineered peptide fusions for improved protein partitioning in aqueous two-phase systems. Effect of fusion localization on endoglucanase I of Trichoderma reesei

Genetic engineering has been used for fusion of the peptide tag, Trp-Pro-Trp-Pro, on a protein to study the effect on partitioning in aqueous two-phase systems. As target protein for the fusions the cellulase, endoglucanase I (endo-1,4-beta-Dglucan-4-glucanohydrolase, EC 3.2.1.4, EGI, Cel7B) of Trichoderma reesei was used. For the first time a glycosylated two-domain enzyme has been utilized for addition of peptide tags to change partitioning in aqueous two-phase systems. The aim was to find an optimal fusion localization for EGI. The peptide was (1) attached to the C-terminus end of the cellulose binding domain (CBD), (2) inserted in the glycosylated linker region, (3) added after a truncated form of EGI lacking the CBD and a small part of the linker. The different constructs were expressed in the filamentous fungus T. reesei under the gpdA promoter from Aspergillus nidulans. The expression levels were between 60 and 100 mg/l. The partitioning behavior of the fusion proteins was studied in an aqueous two-phase model system composed of the thermoseparating ethylene oxide (EO)-propylene oxide (PO) random copolymer EO-PO (50:50) (EO50PO50) and dextran. The Trp-Pro-Trp-Pro tag was found to direct the fusion protein to the top EO50PO50 phase. The partition coefficient of a fusion protein can be predicted with an empirical correlation based on independent contributions from partitioning of unmodified protein and peptide tag in this model system. The fusion position at the end of the CBD, with the spacer Pro-Gly, was shown to be optimal with respect to partitioning and tag efficiency factor (TEF) was 0.87, where a fully exposed tag would have a TEF of 1.0. Hence, this position can further be utilized for fusion with longer tags. For the other constructs the TEF was only 0.43 and 0.10, for the tag fused to the truncated EGI and in the linker region of the full length EGI, respectively.