1
|
Kaur G, Kumar V, Baino F, Mauro JC, Pickrell G, Evans I, Bretcanu O. Mechanical properties of bioactive glasses, ceramics, glass-ceramics and composites: State-of-the-art review and future challenges. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2019; 104:109895. [PMID: 31500047 DOI: 10.1016/j.msec.2019.109895] [Citation(s) in RCA: 92] [Impact Index Per Article: 18.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/25/2018] [Revised: 06/02/2019] [Accepted: 06/14/2019] [Indexed: 11/30/2022]
Abstract
The repair and restoration of bone defects in orthopaedic and dental surgery remains a major challenge despite advances in surgical procedures and post-operative treatments. Bioactive glasses, ceramics, glass-ceramics and composites show considerable potential for such applications as they can promote bone tissue regeneration. This paper presents an overview of the mechanical properties of various bioactive materials, which have the potential for bone regeneration. It also identifies current strategies for improving the mechanical properties of these novel materials, as these are rarely ideal as direct replacements for human bone. For this reason bioactive organic-inorganic composites and hybrids that have tailorable mechanical properties are of particular interest. The inorganic component (bioactive glass, ceramic or glass-ceramic) can provide both strength and bioactivity, while the organic component can add structural reinforcement, toughness and processability. Another topic presented in this paper includes 3D porous scaffolds that act as a template for cell attachment, proliferation and bone growth. Mechanical limitations of existing glass and ceramic scaffolds are discussed, along with the relevant challenges and strategies for further improvement. Advantages and disadvantages of different bioactive materials are critically examined. This paper is focused on optimization of biomaterials properties, in particular mechanical properties and bioactivity.
Collapse
Affiliation(s)
- Gurbinder Kaur
- School of Physics and Materials Science, Thapar University, Patiala 147001, India.
| | - Vishal Kumar
- Shri Guru Granth Sahib World University, Fatehgarh Sahib 140406, India
| | - Francesco Baino
- Applied Science and Technology Department (DISAT), Politecnico di Torino, 10129 Turin, Italy
| | - John C Mauro
- College of Earth and Mineral Sciences, The Pennsylvania State University, PA 16802, USA
| | - Gary Pickrell
- Material Science and Engineering, Virginia Tech, VA 24060, USA
| | - Iain Evans
- School of Engineering, Newcastle University, Newcastle upon Tyne NE1 7RU, UK
| | - Oana Bretcanu
- School of Engineering, Newcastle University, Newcastle upon Tyne NE1 7RU, UK
| |
Collapse
|
2
|
A Buoyant, Microstructured Polymer Substrate for Photocatalytic Degradation Applications. Catalysts 2018. [DOI: 10.3390/catal8100482] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2023] Open
Abstract
Microbubble fabrication of poly(dimethylsiloxane) (PDMS) beads with incorporated TiO2 provides a low-density, microstructured photocatalyst that is buoyant in water. This approach surmounts many of the challenges traditionally encountered in the generation of buoyant photocatalysts, an area which is critical for the implementation of widespread environmental cleaning of organic pollutants in water resources. Because the incorporation into the polymer bead surface is done at low temperatures, the crystal structure of TiO2 is unaltered, ensuring high-quality photocatalytic activity, while PDMS is well-established as biocompatible, temperature stable, and simple to produce. The photocatalyst is shown to degrade methylene blue faster than other buoyant, TiO2-based photocatalysts, and only an order of magnitude less than direct suspension of an equivalent amount of photocatalyst in solution, even though the photocatalyst is only present at the surface of the solution. The reusability of the TiO2/PDMS beads is also strong, showing no depreciation in photocatalytic activity after five consecutive degradation trials.
Collapse
|
3
|
Tran PA, Fox K, Tran N. Novel hierarchical tantalum oxide-PDMS hybrid coating for medical implants: One pot synthesis, characterization and modulation of fibroblast proliferation. J Colloid Interface Sci 2017; 485:106-115. [PMID: 27662021 DOI: 10.1016/j.jcis.2016.06.048] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2016] [Revised: 06/20/2016] [Accepted: 06/20/2016] [Indexed: 10/25/2022]
Abstract
Surface properties such as morphology, roughness and charge density have a strong influence on the interaction of biomaterials and cells. Hierarchical materials with a combination of micron/submicron and nanoscale features for coating of medical implants could therefore have significant potential to modulate cellular responses and eventually improve the performance of the implants. In this study, we report a simple, one pot wet chemistry preparation of a hybrid coating system with hierarchical surface structures consisting of polydimethylsiloxane (PDMS) and tantalum oxide. Medical grade, amine functional PDMS was mixed with tantalum ethoxide which subsequently formed Ta2O5in situ through hydrolysis and condensation during coating process. The coatings were characterized by SEM, EDS, XPS, confocal scanning microscopy, contact angle measurement and in vitro cell culture. Varying PDMS and tantalum ethoxide ratios resulted in coatings of different surface textures ranging from smooth to submicro- and nano-structured. Strikingly, hierarchical surfaces containing both microscale (1-1.5μm) and nanoscale (86-163nm) particles were found on coatings synthesized with 20% and 40% (v/v) tantalum ethoxide. The coatings were similar in term of hydrophobicity but showed different surface roughness and chemical composition. Importantly, higher cell proliferation was observed on hybrid surface with hierarchical structures compared to pure PDMS or pure tantalum oxide. The coating process is simple, versatile, carried out under ambient condition and requires no special equipment.
Collapse
Affiliation(s)
- Phong A Tran
- Queensland University of Technology (QUT), Australia; Department of Chemical and Biomolecular Engineering, The Particulate Fluid Processing Centre, The University of Melbourne, Victoria 3010, Australia.
| | - Kate Fox
- School of Engineering, RMIT University, Melbourne, Victoria 3000, Australia
| | - Nhiem Tran
- School of Science, RMIT University, Melbourne, Victoria 3000, Australia.
| |
Collapse
|
4
|
Kim BR, Kim DH, Kim YD. Superhydrophobic, flexible and gas-permeable membrane prepared by a simple one-step vapor deposition. KOREAN J CHEM ENG 2016. [DOI: 10.1007/s11814-016-0017-6] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
5
|
Kim IA, Rhee SH. Effects of poly(lactic-co-glycolic acid) (PLGA) degradability on the apatite-forming capacity of electrospun PLGA/SiO(2)-CaO nonwoven composite fabrics. J Biomed Mater Res B Appl Biomater 2010; 93:218-26. [PMID: 20091921 DOI: 10.1002/jbm.b.31578] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Abstract
We investigated the effects of poly(lactic-co-glycolic acid) (PLGA) degradability on the apatite-forming ability of electrospun PLGA/SiO(2)-CaO gel composite fabric. Two PLGA copolymer compositions with low and high degradability were used in experiments. A nonwoven polymer/ceramic composite fabric composed of randomly mixed microsized biodegradable PLGA fibers and nanosized bioactive SiO(2)-CaO gel fibers was prepared using a simultaneous electrospinning method. A 17 wt.% PLGA solution was prepared using 1,1,3,3-hexafluoro-2-propanol as a solvent, while the SiO(2)-CaO gel solution was prepared via a condensation reaction following hydrolysis of tetraethyl orthosilicate under acidic conditions. PLGA and SiO(2)-CaO gel solutions were spun simultaneously with two separate nozzles under electric fields of 1 and 2 kV/cm using two syringe pumps with flow rates of 7.5 and 5 mL/h, respectively. As controls, low and high degradable PLGA and SiO(2)-CaO gel nonwoven fabrics were also made by the same methods. The five nonwoven fabrics that were produced were exposed to simulated body fluid (SBF) for 1 week. SBF exposure resulted in the deposition of a layer of apatite crystals on the surfaces of both the SiO(2)-CaO gel and the low degradable PLGA/SiO(2)-CaO gel composite fabrics, but not on the low and high degradable PLGA or the high degradable PLGA/SiO(2)-CaO gel composite fabrics. The results are explained in terms of the acidity of the PLGA degradation products, which could have a direct influence on apatite dissolution.
Collapse
Affiliation(s)
- In Ae Kim
- Department of Dental Biomaterials Science, Dental Research Institute and BK21 HLS, School of Dentistry, Graduate School, Seoul National University, Seoul 110-749, Korea
| | | |
Collapse
|
6
|
Jarrell JD, Dolly B, Morgan JR. Rapid screening, in vitro study of metal oxide and polymer hybrids as delivery coatings for improved soft-tissue integration of implants. J Biomed Mater Res A 2010; 92:1094-104. [PMID: 19301265 DOI: 10.1002/jbm.a.32435] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Abstract
Metal-organic chemistry allows for molecular mixing and creation of a range of submicron phase-separated structures from normally brittle metal oxides and flexible polymers with improved bioactivity and delivery properties. In this study, we used a high throughput platform to investigate the influence of organic metal oxide doping of polydimethylsiloxane (PDMS) coatings on cellular bioactivity and controlled release of vanadium compared with titanium oxide coatings without additional PDMS. Metal-organic-derived titanium and or vanadium was doped into PDMS and used to form a coating on the bottom of cell culture microplates in the absence of added water, acids, or bases. These hybrid coatings were rapidly screened to establish how titanium and vanadium concentration influences cell proliferation, adhesion, and morphology. We demonstrate that titanium doping of PDMS can be used to improve cell proliferation and adhesion, and that vanadium doping caused a biphasic dose response in proliferation. A 28-day vanadium and titanium elution study indicated that titanium was not released, but the presence of PDMS in coatings increased delivery rates of vanadium compared with titania coatings without polymer. Hybrid coatings of titanium-doped polymers have potential for improving wound healing dynamics, soft-tissue integration of medical implants, and use as controlled delivery vehicles.
Collapse
Affiliation(s)
- John D Jarrell
- Department of Molecular Pharmacology, Physiology, and Biotechnology, Brown University, Providence, Rhode Island, USA.
| | | | | |
Collapse
|
7
|
|
8
|
Kamitakahara M, Kawashita M, Miyata N, Kokubo T, Nakamura T. Preparation of bioactive flexible poly(tetramethylene oxide) (PTMO)-CaO-Ta2O5 hybrids. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2007; 18:1117-24. [PMID: 17268865 DOI: 10.1007/s10856-007-0147-9] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/31/2005] [Accepted: 04/06/2006] [Indexed: 05/13/2023]
Abstract
Poly(tetramethylene oxide) (PTMO)-CaO-Ta2O5 hybrids were prepared by hydrolysis and polycondensation of triethoxysilane-functionalized PTMO (Si-PTMO), tantalum ethoxide (Ta(OEt)5) and CaCl2. In the system CaO-free PTMO-Ta2O5, Si-PTMO/Ta(OEt)5 weight ratios were 30/70, 40/60 and 50/50 (hybrids PT30Ca0, PT40Ca0 and PT50Ca0, respectively). In the system PTMO-CaO-Ta2O5, the Si-PTMO/Ta(OEt)5 weight ratio was 40/60 and CaCl2/Ta(OEt)5 mole ratios were 0.05, 0.10 and 0.15 (hybrids PT40Ca5, PT40Ca10 and PT40Ca15, respectively). Crack-free transparent monolithic hybrids were obtained for all the examined compositions except for PT30Ca0. Even CaO-free hybrids PT40Ca0 and PT50Ca0 formed apatite on their surfaces in a simulated body fluid (SBF) within 14 days. Hybrid PT40Ca0 showed higher mechanical strength, which was increased by soaking in SBF, and larger strain to failure than human cancellous bone. The CaO-containing hybrids showed higher apatite-forming ability than the CaO-free hybrids, and its apatite-forming ability increased with increasing CaO content. Hybrids PT40Ca10 and PT40Ca15 formed apatite within 3 days. The mechanical strength of PT40Ca15 was, however, lower than PT40Ca0 and was decreased by soaking in SBF. Thus obtained flexible bioactive CaO-free PTMO-Ta2O5 hybrids are expected to be useful as bone substitutes.
Collapse
Affiliation(s)
- Masanobu Kamitakahara
- Graduate School of Materials Science, Nara Institute of Science and Technology, 8916-5, Ikoma-shi, Nara 630-0192, Japan.
| | | | | | | | | |
Collapse
|
9
|
Yoo JJ, Lee JE, Kim HJ, Kim SJ, Lim JH, Lee SJ, Lee JI, Lee YK, Lim BS, Rhee SH. Comparativein vitro andin vivo studies using a bioactive poly(ɛ-caprolactone)-organosiloxane nanohybrid containing calcium salt. J Biomed Mater Res B Appl Biomater 2007; 83:189-98. [PMID: 17385222 DOI: 10.1002/jbm.b.30783] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
Comparative in vitro and in vivo studies were conducted using a bioactive poly(epsilon-caprolactone)-organosiloxane nanohybrid containing calcium, which was prepared by sol-gel method. The behavior of human bone marrow stromal cells (hBMSCs) during in vitro osteogenic differentiation were evaluated on poly(epsilon-caprolactone)-organosiloxane nanohybrid and poly(epsilon-caprolactone)-organosiloxane nanohybrid coated with apatite, which mimicked in vivo events. hBMSCs cultured on tissue culture plates (TCPs) were used as a control. For comparative studies, in vivo testing was also conducted using poly(epsilon-caprolactone)-organosiloxane nanohybrid and poly(epsilon-caprolactone)-organosiloxane nanohybrid coated with apatite in the diaphyseal bone defects of rabbit tibiae. Initial attachments and early proliferations of hBMSCs onto poly(epsilon-caprolactone)-organosiloxane with or without the apatite layer were comparable those onto TCPs. However, the late proliferation and the osteogenic differentiation activities on poly(epsilon-caprolactone)-organosiloxane nanohybrid were significantly lower than the hybrid coated with apatite or TCPs. These results were caused by the delayed detachment of hBMSCs induced by the upward growth of spire-shaped apatite granules on the flat apatite layer through mixed nucleation (heterogeneous and homogeneous nucleation) and growth of apatite crystals during cell culture. However, the poly(epsilon-caprolactone)-organosiloxane nanohybrid showed excellent osteoconductivity as same as poly(epsilon-caprolactone)-organosiloxane nanohybrid coated with apatite in vivo even though the cell testing results in vitro were poor. This discrepancy can be explained by the difference in initial degree of supersaturation of apatite in cell culture medium and buffering ability between cell culture medium and body fluid with respect to calcium, which directly affects the nucleation mechanism of apatite crystals and the morphology of grown apatite granules. These findings imply that much attention is required and an optimal method should be used to assess cell responses in vitro. Our results suggest that precoating the apatite layer before in vitro testing is desirable for bioactive materials that release calcium quickly and in large amount because this treatment can more closely mimic in vivo events.
Collapse
Affiliation(s)
- Jeong Joon Yoo
- Department of Orthopedic Surgery, College of Medicine, Seoul National University, Yeongeon 28, Jongno, Seoul 110-744, Korea
| | | | | | | | | | | | | | | | | | | |
Collapse
|
10
|
Lee KY, Park M, Kim HM, Lim YJ, Chun HJ, Kim H, Moon SH. Ceramic bioactivity: progresses, challenges and perspectives. Biomed Mater 2006; 1:R31-7. [DOI: 10.1088/1748-6041/1/2/r01] [Citation(s) in RCA: 66] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
11
|
Agathopoulos S, Tulyaganov DU, Ventura JMG, Kannan S, Karakassides MA, Ferreira JMF. Formation of hydroxyapatite onto glasses of the CaO–MgO–SiO2 system with B2O3, Na2O, CaF2 and P2O5 additives. Biomaterials 2006; 27:1832-40. [PMID: 16309741 DOI: 10.1016/j.biomaterials.2005.10.033] [Citation(s) in RCA: 132] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/02/2005] [Accepted: 10/29/2005] [Indexed: 11/26/2022]
Abstract
New bioactive glasses with compositions based on the CaO-MgO-SiO(2) system and additives of B(2)O(3), P(2)O(5), Na(2)O, and CaF(2) were prepared. The in vitro mineralization behaviour was tested by immersion of powders or bulk glasses in simulated body fluid (SBF). Monitoring of ionic concentrations in SBF and scanning electron microscopy (SEM) observations at the surface of the glasses were conducted over immersion time. Raman and infrared (IR) spectroscopy shed light on the structural evolution occurring at the surface of the glasses that leads to formation of hydroxyapatite.
Collapse
Affiliation(s)
- S Agathopoulos
- Department of Ceramics and Glass Engineering, University of Aveiro, CICECO, 3810-193 Aveiro, Portugal
| | | | | | | | | | | |
Collapse
|
12
|
Agathopoulos S, Tulyaganov DU, Valério P, Ferreira JMF. A new model formulation of the SiO2–Al2O3–B2O3–MgO–CaO–Na2O–F glass-ceramics. Biomaterials 2005; 26:2255-64. [PMID: 15585227 DOI: 10.1016/j.biomaterials.2004.07.030] [Citation(s) in RCA: 31] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/16/2003] [Accepted: 07/12/2004] [Indexed: 11/18/2022]
Abstract
Mono-phase glass-ceramics of akermanite were successfully produced from a Ca-mica and wollastonite via low-temperature sintering and crystallization. Doping with P(2)O(5) considerably improves sintering behaviour since P(2)O(5) increases the stability of glass against crystallization at the temperature of sintering onset. The resulting glass-ceramics feature good in vitro acceptance from osteoblasts, and moderate bioactivity due to the enrichment of the glassy phase with Ca and Si. The good quality of the white colour at the surface and throughout the bulk, the matching of microhardness with tooth enamel, and the possibility to coat other biomaterials such as ZrO(2), Ti or hydroxyapatite make these materials promising for medical applications.
Collapse
Affiliation(s)
- Simeon Agathopoulos
- Department of Ceramics and Glass Engineering, University of Aveiro, CICECO, 3810-193 Aveiro, Portugal.
| | | | | | | |
Collapse
|
13
|
Evaluations of a Novel Bioactive and Degradable Poly(Ɛ-Caprolactone) Hybrid Material Containing Silanol Group and Calcium Salt as a Bone Substitute. ACTA ACUST UNITED AC 2005. [DOI: 10.4028/www.scientific.net/kem.284-286.717] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Bioactive poly(e-caprolactone)-siloxane hybrid material was newly developed and its in vitro and in vivo evaluations were made for the potential application as a bone substitute. The polymer precursor, triethoxysilane end capped poly(e-caprolactone) was prepared by the reaction with a,w-hydroxyl poly(e-caprolactone) and 3-isocyanatopropyl triethoxysilane with 1,4-diazabicyclo
[2,2,2] octane as a catalyst and toluene as a solvent. The triethoxysilane end capped poly(e-caprolactone) was hydrolyzed and condensed to yield a hybrid sol-gel material. The gelation was carried out for 1 week at ambient condition in a covered Teflon mold with a few pinholes and then dried under vacuum at room temperature for 48 h. Its bioactivity was evaluated by examining the apatite formation on its surface in the SBF and its osteoconductivity was assessed in the tibia of white rabbit. The hybrid material showed apatite-forming ability in the SBF within 1 week soaking. Besides, new bone was formed on the surface of a cylindrical shaped specimen with no histologically demonstrable intervening non-osseous tissue after 6 weeks implantation. There was no evidence of inflammation or foreign body reaction. From the results, it can be concluded that this newly
developed hybrid material has osteoconductivity and is likely to be used for the application as a bone graft substitute.
Collapse
|
14
|
Evaluation of a Chitosan Nano-Hybrid Material Containing Silanol Group and Calcium Salt as a Bioactive Bone Graft. ACTA ACUST UNITED AC 2005. [DOI: 10.4028/www.scientific.net/kem.284-286.765] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A bioactive chitosan-siloxane nano-hybrid material was newly developed and evaluated for the potential application as a bone graft material. The chitosan which can be dissolved in organic solvent was synthesized by the reaction with phtalic anhydride (Ph-Chitosan) and it was then reacted with 3-isocyanatopropyl triethoxysilane (Si-Chitosan) in dimethylformamide. Following this, the
Si-Chitosan was hydrolyzed and condensed to yield a hybrid sol-gel material (Si-O-Chitosan). The gelation was carried out for 1 week at ambient condition in a covered Teflon mold with a few pinholes and then dried under vacuum at room temperature for 48 h. The bioactivity of the chitosan nano-hybrid material was evaluated by examining the apatite forming ability in the simulated body fluid (SBF). The surface microstructure and functional groups of the specimen was analyzed by field emission scanning electron microscopy and Fourier transformed infrared spectroscopy, respectively. The crystal phases of the specimen before and after the bioactivity testing were analyzed by thin film X-ray diffractometry. Newly developed chitosan nano-hybrid material showed apatite-forming ability
in the SBF within 1 week soaking and this ability was believed to come from the silanol group formed on the surface of Si-O-Chitosan and calcium salt which increased the ionic activity product of apatite in the SBF.
Collapse
|
15
|
Effect of Silica Content in the PMMA/Silica Nano-Composite on the Mechanical Properties and Growth Behavior of Calcium Phosphate Crystals during Cell Culture. ACTA ACUST UNITED AC 2005. [DOI: 10.4028/www.scientific.net/kem.284-286.165] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The effect of silica content in the PMMA/silica nano-composite on the mechanical properties and the growth behavior of apatite crystals were investigated. The PMMA/silica nano-composites with different silica content were synthesized through the sol-gel reaction with triethoxysilane end-capped PMMA and tetraethyl orthosilicate (TEOS). The compressive strength showed its maximum value when the content of TEOS was 20 wt% while the elastic modulus showed its maximum value when the content of TEOS was 60 wt%. The growth behavior of the apatite crystals following the cell culture showed different response according to the silica content. As increasing the TEOS content, the shape of the apatite crystals changed from globule-like structure to fiber-like one.
Collapse
|
16
|
Rhee SH. Effect of calcium salt content in the poly(epsilon-caprolactone)/silica nanocomposite on the nucleation and growth behavior of apatite layer. J Biomed Mater Res A 2004; 67:1131-8. [PMID: 14624498 DOI: 10.1002/jbm.a.20054] [Citation(s) in RCA: 24] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
The effect of calcium salt content in the poly(epsilon-caprolactone) (PCL)/silica nanocomposite on the nucleation and growth behavior of apatite layer in simulated body fluid (SBF) was investigated. The specimens were prepared with low (L) and high (H) concentrations of calcium nitrate tetrahydrate through a sol-gel method. After soaking in the SBF at 36.5 degrees C for 1 week, a densely packed apatite layer that had a smooth surface and a Ca/P ratio similar to bone was formed on specimens containing a low concentration of calcium salt while a loosely packed apatite layer with a rugged surface and a higher Ca/P ratio than that of bone occurred on specimens containing a high concentration of calcium salt. The results are explained in terms of the degree of supersaturation of apatite in the SBF, as determined by the concentrations of constituent ions of apatite and pH. The practical implication of the results is that a dense and bone-like apatite layer on the PCL/silica nanocomposite in vitro, and perhaps in vivo, can be achieved by adopting an appropriate calcium salt content.
Collapse
Affiliation(s)
- Sang-Hoon Rhee
- Department of Dental Biomaterials Science, College of Dentistry, Seoul National University, Seoul 110-749, Korea.
| |
Collapse
|
17
|
Rhee SH, Lee YK, Lim BS, Yoo JJ, Kim HJ. Evaluation of a Novel Poly(ε-caprolactone)−Organosiloxane Hybrid Material for the Potential Application as a Bioactive and Degradable Bone Substitute. Biomacromolecules 2004; 5:1575-9. [PMID: 15244480 DOI: 10.1021/bm049885n] [Citation(s) in RCA: 57] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
A novel poly(epsilon-caprolactone)-organosiloxane hybrid material containing calcium salt (Si-O-PCL) was prepared and evaluated as a bioactive and degradable bone substitute material. The Si-O-PCL hybrid was synthesized by the end-capping of 3-isocyanatopropyl triethoxysilane with alpha,omega-hydroxyl PCL following sol-gel reaction with calcium nitrate tetrahydrate. Its tensile mechanical properties were evaluated, and additional specimens were exposed to simulated body fluid (SBF) for the time range from 3 h to 7 days. The SBF exposure led to the deposition of a layer of apatite crystals on the surface of the Si-O-PCL hybrid within 9 h of soaking. The tensile strength was around 18 MPa, Young's modulus was around 200 MPa, and the strain at break was around 290%. This material is likely to have a potential application as a bioactive and degradable bone substitute because of its apatite forming ability, biodegradability, and mechanical properties comparable to those of human cancellous bone.
Collapse
Affiliation(s)
- Sang-Hoon Rhee
- Department of Dental Materials Science and Dental Research Institute, College of Dentistry, Seoul National University, Seoul 110-749, Korea.
| | | | | | | | | |
Collapse
|
18
|
Rhee SH. Bone-like apatite-forming ability and mechanical properties of poly(ε-caprolactone)/silica hybrid as a function of poly(ε-caprolactone) content. Biomaterials 2004; 25:1167-75. [PMID: 14643590 DOI: 10.1016/j.biomaterials.2003.08.004] [Citation(s) in RCA: 75] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Effect of poly(epsilon-caprolactone) (PCL) content on the bioactivity and mechanical properties of PCL/silica hybrid was investigated. The PCL/silica hybrids with different PCL contents were prepared through co-condensation reaction with triethoxysilane end capped PCL and tetraethyl orthosilicate. The higher the PCL content in the hybrid, the lower the apatite-forming rate and showed polymer-like ductile-tough fracture behavior. On the contrary, the lower the PCL content in the hybrid, the higher the apatite-forming rate and showed ceramic-like hard-brittle fracture behavior. At the intermediate PCL content, the apatite-forming rate and its mechanical properties showed also intermediate behaviors. The highest tensile strength and Young's modulus could be obtained at intermediate PCL content and they were around 20 and 600 MPa, respectively, while the strain at failure was around 50%. This new kind of hybrid material is likely to have the potential to be used as a bone repairing material because of its apatite-forming ability and the mechanical properties comparable to human cancellous bone.
Collapse
Affiliation(s)
- Sang-Hoon Rhee
- Department of Dental Biomaterials Science, College of Dentistry, Seoul National University, Seoul 110-749, South Korea.
| |
Collapse
|
19
|
Miyata N, Fuke KI, Chen Q, Kawashita M, Kokubo T, Nakamura T. Apatite-forming ability and mechanical properties of PTMO-modified CaO–SiO2–TiO2 hybrids derived from sol–gel processing. Biomaterials 2004; 25:1-7. [PMID: 14580903 DOI: 10.1016/s0142-9612(03)00463-0] [Citation(s) in RCA: 47] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/01/2022]
Abstract
Hydrolysis and polycondensation of triethoxysilane end-capped Poly (tetramethylene oxide) (Si-PTMO), tetraethoxysilane (TEOS), tetraisopropyltitanate (TiPT) and calcium nitrate (Ca(NO(3))(2)) gave transparent monolithics of PTMO-modified CaO-SiO(2)-TiO(2) hybrids. The samples with (TiPT)/(TEOS+TiPT) molar ratios from 0 to 0.20 under constant ratio of (Si-PTMO)/(TEOS+TiPT) of 2/3 in weight were prepared. It was found that the incorporation of TiO(2) component into a PTMO-CaO-SiO(2) hybrid results in an increase in the apatite-forming ability in a simulated body fluid: the hybrids with (TiPT)/(TEOS+TiPT) of 0.10 and 0.20 in mol formed an apatite on their surfaces within only 0.5 day. It seemed that, within the range of compositions studied, the TiO(2) content little affects the overall mechanical properties: Young's modulus were 52-55MPa, tensile strength, 7-9MPa, and strain at failure, about 30%. Thus, the organic-inorganic hybrids exhibiting both fairly high apatite-forming ability and high capability for deformation were obtained. These hybrid materials may be useful as new kind of bioactive bone-repairing materials.
Collapse
Affiliation(s)
- Noboru Miyata
- Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Sakyo-ku, Kyoto, 606-8501, Japan.
| | | | | | | | | | | |
Collapse
|
20
|
Abstract
Some ceramics, such as Bioglass, sintered hydroxyapatite, and glass-ceramic A-W, spontaneously bond to living bone. They are called bioactive materials and are already clinically used as important bone substitutes. However, compared with human cortical bone, they have lower fracture toughness and higher elastic moduli. Therefore, it is desirable to develop bioactive materials with improved mechanical properties. All the bioactive materials mentioned above form a bone-like apatite layer on their surfaces in the living body, and bond to bone through this apatite layer. The formation of bone-like apatite on artificial material is induced by functional groups, such as Si-OH, Ti-OH, Zr-OH, Nb-OH, Ta-OH, -COOH, and PO(4)H(2). These groups have specific structures revealing negatively charge, and induce apatite formation via formations of an amorphous calcium compound, e.g., calcium silicate, calcium titanate, and amorphous calcium phosphate. These fundamental findings provide methods for preparing new bioactive materials with different mechanical properties. Tough bioactive materials can be prepared by the chemical treatment of metals and ceramics that have high fracture toughness, e.g., by the NaOH and heat treatments of titanium metal, titanium alloys, and tantalum metal, and by H(3)PO(4) treatment of tetragonal zirconia. Soft bioactive materials can be synthesized by the sol-gel process, in which the bioactive silica or titania is polymerized with a flexible polymer, such as polydimethylsiloxane or polytetramethyloxide, at the molecular level to form an inorganic-organic nano-hybrid. The biomimetic process has been used to deposit nano-sized bone-like apatite on fine polymer fibers, which were textured into a three-dimensional knit framework. This strategy is expected to ultimately lead to bioactive composites that have a bone-like structure and, hence, bone-like mechanical properties.
Collapse
Affiliation(s)
- Tadashi Kokubo
- Department of Material Chemistry, Faculty of Engineering, Graduate School of Engineering, Kyoto University, Yoshida, Sakyo-ku, 606-8501, Kyoto, Japan
| | | | | |
Collapse
|
21
|
Rhee SH. Effect of molecular weight of poly(epsilon-caprolactone) on interpenetrating network structure, apatite-forming ability, and degradability of poly(epsilon-caprolactone)/silica nano-hybrid materials. Biomaterials 2003; 24:1721-7. [PMID: 12593953 DOI: 10.1016/s0142-9612(02)00579-3] [Citation(s) in RCA: 47] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
The effect of molecular weight of poly(epsilon-caprolactone) (PCL) on the bioactivity of a PCL/silica nano-hybrid containing calcium salt was investigated. Two hybrids were prepared with low and high molecular weight PCLs, respectively, through a sol-gel method. Their bioactivities were evaluated using a simulated body fluid (SBF), which had almost the same ion concentrations with human blood plasma. Fast and uniform nucleation and growth of the apatite crystals were observed to occur all through the hybrid surface when low molecular weight PCL was used, while slow and random nucleation and growth of the apatite crystals were observed to occur when high molecular weight PCL was used, after soaking for 3 days in the SBF. This phenomenon was explained in terms of the distribution and dispersion of silica phase in the hybrid and the ionic activity product of the apatite in the SBF, which were dependent on the free volume and degradation rate of non-bioactive PCL phase, respectively.
Collapse
Affiliation(s)
- Sang-Hoon Rhee
- Advanced Materials Division, Korea Research Institute of Chemical Technology, Yusung, PO Box 107, Daejeon 305-600, South Korea.
| |
Collapse
|
22
|
Effect of Silica Content in PMMA/Silica Hybrids Containing Calcium Salt on Calcium Phosphate Formation and Cell Responses. ACTA ACUST UNITED AC 2003. [DOI: 10.4028/www.scientific.net/kem.240-242.183] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
23
|
Rhee SH, Hwang MH, Si HJ, Choi JY. Biological activities of osteoblasts on poly(methyl methacrylate)/silica hybrid containing calcium salt. Biomaterials 2003; 24:901-6. [PMID: 12504510 DOI: 10.1016/s0142-9612(02)00421-0] [Citation(s) in RCA: 39] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
Abstract
The biological activity of osteoblasts on the newly developed bioactive poly(methyl methacrylate) (PMMA)/silica hybrid containing calcium salt was investigated. The attachment, proliferation, and differentiation of primary cultured mouse calvarial osteoblasts were evaluated by hexosaminase, MTT, and alkaline phosphatase activity assays, respectively. The PMMA/silica hybrid showed higher biological activities than those of pure PMMA with regard to all three parameters. Besides, the calcium phosphate layer, determined by scanning electron microscopy with energy dispersive spectroscopy, occurred only on the PMMA/silica hybrid. Better biological activities on the PMMA/silica hybrid than those on the PMMA were explained by the role of calcium phosphate layer formed on the PMMA/silica hybrid and the released calcium and silicon ions from it during the cell culture. These results suggest that the PMMA/silica hybrid might be useful as a bone substitute or filler.
Collapse
Affiliation(s)
- Sang Hoon Rhee
- Advanced Materials Division, Korea Research Institute of Chemical Technology, Daejeon 305-600, South Korea
| | | | | | | |
Collapse
|
24
|
Agathopoulos S, Tulyaganov DU, Marques PAAP, Ferro MC, Fernandes MHV, Correia RN. The fluorapatite-anorthite system in biomedicine. Biomaterials 2003; 24:1317-31. [PMID: 12527274 DOI: 10.1016/s0142-9612(02)00468-4] [Citation(s) in RCA: 52] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
Abstract
Glasses and glass ceramics of fluorapatite-anorthite (eutectic composition) were produced and characterized in order to evaluate their potential application in biomedicine. Bio-reactivity was determined by in vitro tests by immersion of powders in simulated plasma liquids as well as by in vivo experiments by implantation in rabbits. According to the results, the investigated materials are bio-acceptable since no toxic or other harmful evidence was detected. Glass-ceramics showed remarkable inertness, whereas glasses spontaneously dissolved in SBF and after 1 week moderate formation of apatite was observed, that however ceased within a month.
Collapse
Affiliation(s)
- S Agathopoulos
- Department of Ceramics and Glass Engineering, University of Aveiro, 3810-193, Aveiro, Portugal.
| | | | | | | | | | | |
Collapse
|
25
|
Miyata N, Fuke KI, Chen Q, Kawashita M, Kokubo T, Nakamura T. Apatite-forming ability and mechanical properties of PTMO-modified CaO-SiO2 hybrids prepared by sol-gel processing: effect of CaO and PTMO contents. Biomaterials 2002; 23:3033-40. [PMID: 12069346 DOI: 10.1016/s0142-9612(02)00065-0] [Citation(s) in RCA: 60] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
Abstract
Transparent monolithics of triethoxysilane end-capped poly(tetramethylene oxide) (Si-PTMO)-modified CaO-SiO2 hybrids were successfully synthesized by hydrolysis and polycondensation of Si-PTMO, tetraethoxysilane (TEOS) and calcium nitrate. As for the samples with varying (Ca(NO3)2)/(TEOS) molar ratios under constant ratio of (Si-PTMO)/(TEOS) of 2/3 in weight. the apatite-forming ability in a simulated body fluid (SBF) which is indicative of bioactivity. remarkably increased with increasing CaO content, although the tensile strength and Young's modulus decreased. The hybrid with (Ca(NO3)2)/(TEOS) = 0.15 in mol formed an apatite on its surface within only 1 day. For this series of samples, the strain at failure which is a measure of capability for deformation of material, was found to be about 30% and almost independent of CaO content. As for the samples with varying (Si-PTMO)/(TEOS) weight ratios under constant ratio of (Ca(NO3)2)/(TEOS) of 0.15 in mol, the strain at failure increased with increasing Si-PTMO content, but the apatite-forming ability, tensile strength and Young's modulus decreased. Thus, the synthesis of the hybrids exhibiting both high apatite-forming ability and high extensibility can be achieved by selecting suitable CaO and Si-PTMO contents. These new kind of hybrid materials may be useful as bioactive bone-repairing materials.
Collapse
Affiliation(s)
- Noboru Miyata
- Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Japan.
| | | | | | | | | | | |
Collapse
|