Determination of amiodarone hydrochloride in pharmaceutical formulations by derivative UV spectrophotometry and high-performance liquid chromatography (HPLC)

Flow injection chemiluminescent determination of amiodarone in pharmaceutical preparations using photogenerated tris(2,2′-bipyridyl)ruthenium(III)

A flow injection configuration was developed and evaluated for the chemiluminescent determination of amiodarone. The method is based on the reaction of the drug with tris(2,2'-bipyridyl)ruthenium(III), which was generated through the on-line photo-oxidation of tris(2,2'-bipyridyl)ruthenium(II) with peroxydisulfate. Under the optimum experimental conditions, a linear calibration graph was obtained over the range 3.0-60.0 microg ml(-1) with a detection limit of 0.28 microg ml(-1). The proposed method allows 120 injections h(-1) with excellent repeatability and precision (R.S.D. less than 0.5% and 2.8%, respectively) and a reagent consumption of only 0.37 micromol (0.27 mg) of Ru(bpy)(3)Cl(2) x 6H(2)O per determination. The method was successfully applied to the determination of amiodarone in commercial pharmaceutical formulations.

A systematic review and critical comparison of internal standards for the routine liquid chromatographic assay of amiodarone and desethylamiodarone

Despite potential adverse effects, clinical use of amiodarone is increasing because of its efficacy in treating arrhythmias. Thus there is a continued need for a rapid, practical amiodarone assay to better study the relationship between serum concentrations and clinical effects and to guide safer dosing. Because the most widely used internal standard, L8040, is no longer available, a systematic comparison of potential alternatives was undertaken based on physicochemical and chromatographic characteristics. All amiodarone assays indexed on Medline were reviewed to produce a list of alternatives and five other potential substances considered based on previous experiences. An isocratic high-performance liquid chromatographic method was modified to allow simultaneous resolution of multiple compounds. The internal standard was expected to perform well in the solid-phase extraction of small sample volumes. No commercially available substances were able to duplicate all the advantages of L8040. Tamoxifen, the most acceptable alternative, was used to develop an assay to measure amiodarone and desethylamiodarone at concentrations as low as 0.25 mg/L in 100 microliters of serum (5 ng detected in a 20 microliters injection). Standard curves were linear over the range of concentrations found in our patients (0.25 to 8 mg/L), within-run coefficients of variation (CVs) averaged 5.3% for amiodarone and 2.9% for desethylamiodarone, and between-run CVs were 4.5% for amiodarone and 1.6% for desethylamiodarone.

First- and second-derivative spectrophotometric determination of imipenem and cilastatin in injections

First- and second-derivative spectrophotometry has been used for the quantitation of mixtures of imipenem and cilastatin sodium, compounds that have closely overlapping spectral bands. Beer's law was obeyed at concentrations up to 100 micrograms ml-1 of imipenem in both the first- and second-derivative modes and up to 75 micrograms ml-1 of cilastatin in the first-derivative mode. Detection limits at the P = 0.05 level of significance were calculated to be 0.40 and 0.52 micrograms ml-1 of imipenem and cilastatin sodium, respectively, in the first-derivative mode, and in a range from 0.45 to 0.68 micrograms ml-1 for imipenem in the second-derivative mode. The method, which is rapid, simple and does not require a separation step, has been successfully applied to the assay of commercial injections.

Analysis of miconazole and econazole in pharmaceutical formulations by derivative UV spectroscopy and liquid chromatography (HPLC)

Methods based on derivative UV spectrophotometry and high-performance liquid chromatography (HPLC) have been developed for the selective determination of miconazole and econazole in pharmaceutical dosage forms. A solid-phase extraction (SPE) procedure using a diol column gave quantitative drug extraction from formulated creams and provided purified sample solutions suitable for assay by the derivative UV spectrophotometric and HPLC methods. The proposed methods gave comparable accurate results, whereas a conventional UV spectrophotometric method was found to be seriously affected by excipients.