Enhanced Solubility of Ibuprofen by Complexation with β-Cyclodextrin and Citric Acid

The ability of β-CD to form inclusion complexes with ibuprofen (IBU) and at the same time to make a two-phase system with citric acid was explored in the present study for achieving improved solubility and dissolution rate of IBU. Mechanical milling as well as mechanical milling combined with thermal annealing of the powder mixtures were applied as synthetic methods. Solubility and dissolution kinetics of the complexes were studied in compliance with European Pharmacopoeia (ICH Q4B). β-CD and citric acid (CA) molecules were shown to interact by both ball milling (BM), thermal annealing, as well as BM with subsequent annealing. Complexes were also formed by milling the three compounds (β-CD, CA and IBU) simultaneously, as well as by a consecutive first including IBU into β-CD and then binding the formed β-CD/IBU inclusion complex with CA. As a result, ternary β-CD/IBU/CA complex formed by initial incorporation of ibuprofen into β-CD, followed by successive formation of a two-phase mixture with CA, exhibited notably improved dissolution kinetics compared to the pure ibuprofen and slightly better compared to the binary β-CD/IBU system. Although the addition of CA to β-CD/IBU does not significantly increase the solubility rate of IBU, it must be considered that the amount of β-CD is significantly less in the ternary complex compared to the binary β-CD/IBU.

Preparation of aromatic β-cyclodextrin nano/microcapsules and corresponding aromatic textiles: A review

Fragrance finishing of textiles is receiving substantial interest, with aromatherapy being one of the most popular aspects of personal health care. However, the longevity of aroma on textiles and presence after subsequent launderings are major concerns for aromatic textiles directly loaded with essential oils. These drawbacks can be weakened by incorporating essential oil-complexed β-cyclodextrins (β-CDs) onto various textiles. This article reviews various preparation methods of aromatic β-cyclodextrin nano/microcapsules, as well as a wide variety of methods for the preparation of aromatic textiles based on them before and after forming, proposing future trends in preparation processes. The review also covers the complexation of β-CDs with essential oils, and the application of aromatic textiles based on β-CD nano/microcapsules. Systematic research on the preparation of aromatic textiles facilitates the realization of green and simple industrialized large-scale production, providing needed application potential in the fields of various functional materials.

(-)-Menthol-β-cyclodextrin inclusion complex production and characterization

(-)-Menthol has been widely used in clinical medicine, flavor, and fragrance. However, high volatility, short retention time, low solubility in water, and whisker growth of menthol are crucial problems for its application. In this paper, (-)-menthol-β-cyclodextrin inclusion complex was fabricated to solve these problems. The product was characterized by X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis. The results showed that menthol was successfully encapsulated in the cavity of β-cyclodextrin. Menthol itself vaporized almost completely at around 120 oC, while the maximum menthol release rate occurred at 267.5 oC after the formation of the inclusion complex. The stability and retention time were improved. The menthol release reaction order, apparent activation energy and the pre-exponential factor were obtained and their values were 0, 142.9 kJ/mol and 1.6 × 1013 respectively. The structure of menthol-β-cyclodextrin inclusion complex was investigated by molecular simulation and the minimum energy, –116.7 kJ/mol, was obtained at –0.8 × 10–10 m.

A review of controlled release from cyclodextrins: release methods, release systems and application

The controlled release of guest molecules from cyclodextrin (CD) inclusion complexes is very important for specific industrial applications in foods, medicine, cosmetics, textiles, agriculture, environmental protection, and chemical materials. The term "controlled release" encompasses several related methods, including those referred to as immediate release, sustained release and targeted release. Many different CD-based controlled release systems are currently used in practical applications. CD inclusion complexes, CD coupling, supramolecular hydrogels, and supramolecular micelles are among the most common. This review systematically introduces the principles and applications of CD-based controlled release systems, providing a theoretical basis for improving the bioavailability of effective substances and broadening their range of application.

The Role of β-Cyclodextrin in the Textile Industry-Review

β-Cyclodextrin (β-CD) is an oligosaccharide composed of seven units of D-(+)-glucopyranose joined by α-1,4 bonds, which is obtained from starch. Its singular trunk conical shape organization, with a well-defined cavity, provides an adequate environment for several types of molecules to be included. Complexation changes the properties of the guest molecules and can increase their stability and bioavailability, protecting against degradation, and reducing their volatility. Thanks to its versatility, biocompatibility, and biodegradability, β-CD is widespread in many research and industrial applications. In this review, we summarize the role of β-CD and its derivatives in the textile industry. First, we present some general physicochemical characteristics, followed by its application in the areas of dyeing, finishing, and wastewater treatment. The review covers the role of β-CD as an auxiliary agent in dyeing, and as a matrix for dye adsorption until chemical modifications are applied as a finishing agent. Finally, new perspectives about its use in textiles, such as in smart materials for microbial control, are presented.

Odorant binding proteins: a biotechnological tool for odour control

The application of an odorant binding protein for odour control and fragrance delayed release from a textile surface was first explored in this work. Pig OBP-1 gene was cloned and expressed in Escherichia coli, and the purified protein was biochemically characterized. The IC₅₀ values (concentrations of competitor that caused a decay of fluorescence to half-maximal intensity) were determined for four distinct fragrances, namely, citronellol, benzyl benzoate, citronellyl valerate and ethyl valerate. The results showed a strong binding of citronellyl valerate, citronellol and benzyl benzoate to the recombinant protein, while ethyl valerate displayed weaker binding. Cationized cotton substrates were coated with porcine odorant binding protein and tested for their capacity to retain citronellol and to mask the smell of cigarette smoke. The immobilized protein delayed the release of citronellol when compared to the untreated cotton. According to a blind evaluation of 30 assessors, the smell of cigarette smoke, trapped onto the fabrics' surface, was successfully attenuated by porcine odorant binding protein (more than 60 % identified the weakest smell intensity after protein exposure compared to β-cyclodextrin-treated and untreated cotton fabrics). This work demonstrated that porcine odorant binding protein can be an efficient solution to prevent and/or remove unpleasant odours trapped on the large surface of textiles. Its intrinsic properties make odorant binding proteins excellent candidates for controlled release systems which constitute a new application for this class of proteins.

A review on the application of inorganic nano-structured materials in the modification of textiles: focus on anti-microbial properties

Textiles can provide a suitable substrate to grow micro-organisms especially at appropriate humidity and temperature in contact to human body. Recently, increasing public concern about hygiene has been driving many investigations for anti-microbial modification of textiles. However, using many anti-microbial agents has been avoided because of their possible harmful or toxic effects. Application of inorganic nano-particles and their nano-composites would be a good alternative. This review paper has focused on the properties and applications of inorganic nano-structured materials with good anti-microbial activity potential for textile modification. The discussed nano-structured anti-microbial agents include TiO(2) nano-particles, metallic and non-metallic TiO(2) nano-composites, titania nanotubes (TNTs), silver nano-particles, silver-based nano-structured materials, gold nano-particles, zinc oxide nano-particles and nano-rods, copper nano-particles, carbon nanotubes (CNTs), nano-clay and its modified forms, gallium, liposomes loaded nano-particles, metallic and inorganic dendrimers nano-composite, nano-capsules and cyclodextrins containing nano-particles. This review is also concerned with the application methods for the modification of textiles using nano-structured materials.

Vascular prostheses with controlled release of antibiotics

Vascular prostheses were functionalised with the aim to obtain a slow release of antibiotics in order to reduce postoperative infections. The original process that we present in this paper is based on the use of a family of cage molecules named cyclodextrins (CD). These compounds have the ability to form reversible inclusion complexes with drugs such as antibiotics. The aim of this work was to graft CD onto the prosthesis, so that an antibiotic can be bound on it by this inclusion phenomenon, and then be progressively released over a prolonged period by a complex dissociation mechanism. This paper presents the first part of this research program and concerns mainly the study of the functionalization parameters. It presents surface characterization results of the modified prostheses. The PET prostheses were immersed into a solution containing a cross linking agent, cyclodextrins (beta-CD, gamma-CD, HP-beta-CD and HP-gamma-CD) and a catalyst and were padded. Grafting occurred by the mean of a thermofixation step at a temperature comprised between 140 and 180 degrees C. It was observed that the support was permanently modified when the CD polymer that coated the fibres resisted to the final washing process. Grafting rates of 12 wt% in CD polymer could be reached. It was also observed that the fibre coating reaction induced an increase of the permeability of the grafts.

Incorporation of the sunscreen agent, octyl methoxycinnamate in a cellulosic fabric grafted with β-cyclodextrin

The aim of the study was to investigate the incorporation of the sunscreen agent, octyl methoxycinnamate into cyclodextrin cavities covalently bound to cloth fibres. Tencel, a cellulosic fabric, was grafted with beta-cyclodextrin molecules through reaction with monochlorotriazinyl-beta-cyclodextrin (beta-CDMCT). The finished and untreated textiles were soaked in water-methanol mixtures containing 2% (v/v) of sunscreen agent and subsequently subjected to several washing cycles. The unmodified and modified fabrics were characterized by UV spectrophotometry and thermogravimetric analysis. The level of octyl methoxycinnamate entrapped in the Tencel tissue was determined by high-performance liquid chromatography and was found to be much higher (0.0203%, w/w) for the textile functionalised with beta-CDMCT compared to the unmodified fabric (0.0025%, w/w). In addition, spectrophotometric assessment of UV transmission through the fabric samples using the Transpore test showed that the in vitro sun protection factor of the textile support was markedly enhanced (3.2-fold increase) by impregnation with octyl methoxycinnamate of the beta-CDMCT grafted textile. Hence, even after repeated washings, the beta-CD finished fabric exhibits higher sunscreen agent retention and photoprotective properties than the unmodified textile material.