Cyclodextrin-enabled green environmental biotechnologies

Most of the organic compounds contaminating the environment can form inclusion complexes with cyclodextrins resulting in enhanced solubility (a benefit in soil remediation) or just the opposite: reduced mobility by sorption (a benefit in wastewater treatment). Combining biotechnologies with cyclodextrin, a renewable and biodegradable material, green environmental technologies of high efficiency were developed. For instance, the cyclodextrin-enabled soil washing/flushing technologies combined with bioremediation have been demonstrated in full-scale field experiments. The efficiency of tertiary wastewater treatment by sorption of non-biodegradable xenobiotics, such as residual pharmaceutics, was proved. The biofilm formation in fouling processes can be prevented or reduced either by applying cyclodextrin-based coatings or by manipulation of quorum sensing (bacterial communication) via capturing signal molecules.

Potential of activated carbon to recover randomly-methylated-β-cyclodextrin solution from washing water originating from in situ soil flushing

Despite the overall high efficacy of cyclodextrins to accelerate the treatment of soil aquifer remediation by in-situ soil flushing, the use in practice remains limited because of the high costs of cyclodextrin and high concentrations needed to significantly reduce the treatment time. The current study tested the potential of activated carbon to treat washing water originating from soil flushing in order to selectively separate hydrocarbon contaminants from washing water containing cyclodextrin and subsequently reuse the cyclodextrin solution for reinfiltration. A high recovery of the cyclodextrin from the washing water would reduce the costs and would make the technique economically feasible for soil remediation. This study aimed to investigate whether cyclodextrin can pass through the activated carbon filter without reducing the cyclodextrin concentration when the contaminated washing water is treated and whether the presence of cyclodextrin negatively affects the purification potential of activated carbon to remove the organic pollutants from the pumped soil water. Lab-scale column experiments showed that with the appropriate activated carbon 100% of cyclodextrin (randomly-methylated-β-cyclodextrin) can be recovered from the washing water and that the effect on the efficiency of activated carbon to remove the hydrocarbon contaminants remains limited. These results show that additional field tests are useful to make in-situ soil flushing with cyclodextrin both a technical and an economical interesting technique. These results might stimulate the application of cyclodextrin in soil treatment technology.

Soil type affects plant colonization, activity and catabolic gene expression of inoculated bacterial strains during phytoremediation of diesel

The combined use of plants and associated microorganisms has great potential for cleaning up soils contaminated with petroleum hydrocarbons. Apart from environmental conditions the physicochemical properties of the soil are the main factors influencing the survival and activity of an inoculated strain as well as the growth of plants. This study examined the effect of different soil types (sandy, loamy sand and loam) on the survival, gene abundance and catabolic gene expression of two inoculated strains (Pseudomonas sp. strain ITRI53 and Pantoea sp. strain BTRH79) in the rhizosphere and shoot interior of Italian ryegrass vegetated in diesel contaminated soils. High colonization, gene abundance and expression in loamy soils were observed. By contrast, low colonization, gene abundance and absence of gene expression in sandy soil were found. The highest levels of genes expression and hydrocarbon degradation were seen in loamy soil that had been inoculated with BTRH79 and were significantly higher compared to those in other soils. A positive correlation was observed between gene expression and hydrocarbon degradation indicating that catabolic gene expression is necessary for contaminant degradation. These results suggest that soil type influences the bacterial colonization and microbial activities and subsequently the efficiency of contaminant degradation.

Development of an innovative soil remediation: "Cyclodextrin-enhanced combined technology"

This paper introduces an in situ "Cyclodextrin-enhanced soil bioremediation technology" which is a combination of 1. in situ bioventilation for biodegradation in the unsaturated soil zone; 2. physico-chemical treatment of the pumped ground water; 3. impulsive flushing for the three-phase soil. For enhancement of biodegradation and solubilization randomly methylated beta-cyclodextrin (RAMEB) was used. An additional aim of this study was to prove the importance of the technology monitoring which was used for characterisation of the soil processes by an integrated methodology. It consists of physico-chemical, biological and ecotoxicological methods specific for the contaminants. For technology monitoring the mobile soil phases--soil gas and ground water--were analysed. Sampling of the whole soil was carried out at the start and end of the technology application. RAMEB resulted in the enhanced removal of pollutants both from the saturated and unsaturated soil zones. Moreover, the biodegradation was more effective than the pump and treat technology, proved by the establishment of the carbon material balance in all soil phases.

Simultaneous mobilization of heavy metals and polychlorinated biphenyl (PCB) compounds from soil with cyclodextrin and EDTA in admixture

This study evaluated the efficacy of a washing process with cyclodextrin in combination with ethylenediaminetetraacetate (EDTA) for the simultaneous mobilization of heavy metals and PCBs from a field contaminated soil. Ultrasonically aided mixing of the field contaminated soil with a combination of cyclodextrin solution (10%, w/v) and a sparing quantity (2 mmol) of EDTA, simultaneously mobilized appreciable quantities of PCBs and much of the analyte metal (Cd, Cr, Cu, Mn, Ni, Pb, Zn) burdens. Relative to the action of individual reagents, a combination of randomly methylated (RAMEB) or hydroxypropyl beta-cyclodextrin (HPCD) with EDTA did not alter the PCB extraction efficiency nor did the presence of cyclodextrin change the efficiency of mobilization of most heavy metals (Al, Cd, Cr, Fe, Mn, Ni, and Zn) but did increase the recovery of Cu and Pb modestly. Three sonication-washes with the same charge of reagents mobilized appreciable quantities of PCBs (40-76%) and quantitatively extracted the labile fraction of Cd, Cu, Mn, and Pb. RAMEB proved to be more efficient than HPCD for PCB extractions. Three successive extractions with a single charge of cyclodextrin mobilized almost as much PCB (RAMEB, 76%; HPCD, 40%) as did the companion extractions that used fresh reagents each time (RAMEB, 78%; HPCD, 42%). Collectively, these studies demonstrated that PCB compounds and selected heavy metals can be co-extracted efficiently from soil with three successive washes with the same washing suspension containing EDTA and cyclodextrin.

Biodegradation of cyclodextrins in soil

Cyclodextrins, especially random methylated betaCD (RAMEB) and hydroxypropyl betaCD (HPbetaCD), are becoming common enhancing additives in the bioremediation of soils formerly contaminated by hydrocarbons and/or other poorly bioavailable organic pollutants. Therefore, their degradation in the soil, particularly the most persistent RAMEB, has been of great concern. Like oil contaminants, these additives should be biodegradable via an environmentally safe technology. Hence, in this paper, the biodegradability of eight different cyclodextrins (CDs) in four different soils was examined under various treatment conditions in laboratory and pilot scale field experiments. This paper is the first report on the potential biological fate of CDs studied under a large variety of environmental conditions and in different soil ecosystems. Data on the potential relationship between CD biodegradation and the biological removal of hydrocarbons in the CD-amended contaminated soils are also given. All CDs were found to be more or less biodegradable; even the most persistent RAMEB was depleted from soils under favourable conditions. In the field experiments, the depletion of RAMEB to about 40% of its initial level was observed for a period of 2 years in hydrocarbon-contaminated soils of high organic matter and cell concentration.

Improvement of the desorption of the herbicide norflurazon from soils via complexation with beta-cyclodextrin

The effect of beta-cyclodextrin (beta-CD) on the removal of the herbicide norflurazon (NFL) from soils has been investigated. The interaction of NFL with beta-CD in solution yielded the formation of a water-soluble inclusion complex at 1:1 stoichiometric ratio, which gave an increase in NFL solubility. Desorption studies of NFL previously adsorbed on six soils of different characteristics have been performed in the presence of 0.01 M beta-CD or 0.01 M Ca(NO(3))(2) as extractant solutions. Positive hysteresis was observed in all soils when 0.01 M Ca(NO(3))(2) solution was used, indicating that desorption of NFL from these soils was not completely reversible. On the contrary, the application of beta-CD solutions to soils where NFL had been previously adsorbed increased very much its desorption, and a negative hysteresis was obtained for all soils studied; that is, more NFL was desorbed with respect to NFL adsorption isotherm. A clear relationship was observed between the physicochemical characteristics of the soils and the beta-CD concentration necessary to remove the herbicide, the percentages of desorption observed for each soil being inversely related to the values obtained for the Freundlich sorption capacity parameter of the herbicide, K(f). In general, high desorption yields can be obtained with very low beta-CD concentrations, which is an important advantage from an economic point of view, although in those soils that present an extremely high NFL adsorption, higher amounts of beta-CD should be used. The results obtained indicate the high extracting power of beta-CD toward the herbicide previously adsorbed on the soils and the potential use of beta-CD for in situ remediation of pesticide-contaminated soils.

Enhanced biodegradation of transformer oil in soils with cyclodextrin ? from the laboratory to the field

The use cyclodextrins for the intensification of bioremediation by improving the mobility and bioavailability of contaminants has recently been studied. In this work, the role of randomly methylated beta-cyclodextrin in the bioremediation of soils contaminated with transformer oil was studied both in bench scale bioreactors and through field experiments. The aims of this research were to (a) establish the scientific background of a cyclodextrin-based soil bioremediation technology, (b) demonstrate its feasibility and effectiveness in the field, and (c) develop an integrated methodology, consisting of a combination of physical, chemical, biological and ecotoxicological analytical methods, for efficiently monitoring the technology performances. The stepwise increasing scale of the experiments and the application of the integrated analytical methodology supported the development of a scientifically established new technology and the identification of the advantages and the limitations of its application in the field. At each phase of the study, randomly methylated beta-cyclodextrin was found to significantly enhance the bioremediation and detoxification of the transformer oil-contaminated soils employed by increasing the bioavailability of the pollutants and the activity of indigenous microorganisms.

Effect of randomly methylated beta-cyclodextrin on physical properties of soils

The application of cyclodextrins in several soil remediation technologies has been increasingly studied, but little is known about their effects on soil physical properties. One of the popular soil remediation additives, randomly methylated beta-cyclodextrin (RAMEB), was found to significantly alter surface and pore properties of soil clay minerals. Therefore, in this paper we studied the effect of various RAMEB doses on physical properties of selected soils, representing a wide range of clay content (3-49%). The results showed that soil physical properties were greatly modified by RAMEB treatment. Analysis of water vapor adsorption isotherms revealed that RAMEB increased water adsorption and surface area in sandy soils and decreased them in clayey soils. An increase in adsorption energy of water in RAMEB-treated soils indicated that desorption of nonpolar pollutants can be enhanced. Water vapor desorption isotherms showed that the volumes and radii of micropores (nanometers range) increased above 1% RAMEB concentration. The micropores became more rough and complex after RAMEB treatment as deduced from an increase in fractal dimensions. The volume of soil mesopores measured by mercury intrusion porosimetry (micrometers range) gradually decreased in most soils with an increase in RAMEB concentration whereas the average mesopore radius increased, indicating that finer mesopores were blocked by RAMEB. Measurements of the granulometric composition of soils by sedimentation analysis showed that the amount of coarse-size soil fractions increased on the expense of finer fractions due to aggregation of smaller particles. Behavior of the studied soils after RAMEB treatment depended on their clay content and the dose of cyclodextrin. In clay-rich soils, strong interactions of cyclodextrins with the soil solid phase governed the resulting soil properties. In clay-poor soils, the cyclodextrin excess (not interacted with clays) played a dominant role. Modification of surface, pore, and aggregation properties of soils by RAMEB can have a significant effect in soil remediation technologies.