Environmental risk assessment for sustainable industrial urban development: The case of northern industrial zone of Pavlodar, Kazakhstan

This study assesses heavy metal (HM) contamination in soils of an urban industrial zone using statistical and spatial analysis methods. Concentrations of 12 key HMs, including Zn, Pb, Cu, and Ni, were measured using X-ray fluorescence (XRF), with values exceeding background levels several times in certain areas. Pollution indices such as the Pollution Load Index (PLI) and Total Pollution Indicator (Zc) revealed moderate to high contamination levels, with PLI values ranging from 1.05 to 3.38 and Zc values between 0.67 and 51.34. Health risk assessments indicated that the hazard quotients (HQ) exceeded safe thresholds in hotspots, highlighting potential risks. Spatial distribution maps identified industrial activities as the primary source of contamination. Specifically, according to the PLI, approximately 93.757% of the studied area is classified as moderately contaminated, while 0.702% is considered significantly contaminated. These findings provide a baseline for monitoring and mitigating soil pollution in industrial regions while offering insights for sustainable land management.

Observational Constraints on the Aerosol Optical Depth-Surface PM2.5 Relationship during Alaskan Wildfire Seasons

Wildfire is one of the main sources of PM2.5 (particulate matter with aerodynamic diameter < 2.5 μm) in the Alaskan summer. The complexity in wildfire smokes, as well as limited coverage of ground measurements, poses a big challenge to estimate surface PM2.5 during wildfire season in Alaska. Here we aim at proposing a quick and direct method to estimate surface PM2.5 over Alaska, especially in places exposed to strong wildfire events with limited measurements. We compare the AOD-surface PM2.5 conversion factor (η = PM2.5/AOD; AOD, aerosol optical depth) from the chemical transport model GEOS-Chem (ηGC) and from observations (ηobs). We show that ηGC is biased high compared to ηobs under smoky conditions, largely because GEOS-Chem assigns the majority of AOD (67%) within the planetary boundary layer (PBL) when AOD > 1, inconsistent with satellite retrievals from CALIOP. The overestimation in ηGC can be to some extent improved by increasing the injection height of wildfire emissions. We constructed a piecewise function for ηobs across different AOD ranges based on VIIRS-SNPP AOD and PurpleAir surface PM2.5 measurements over Alaska in the 2019 summer and then applied it on VIIRS AOD to derive daily surface PM2.5 over continental Alaska in the 2021 and 2022 summers. The derived satellite PM2.5 shows a good agreement with corrected PurpleAir PM2.5 in Alaska during the 2021 and 2022 summers, suggesting that aerosol vertical distribution likely represents the largest uncertainty in converting AOD to surface PM2.5 concentrations. This piecewise function, η'obs, shows the capability of providing an observation-based, quick and direct estimation of daily surface PM2.5 over the whole of Alaska during wildfires, without running a 3-D model in real time.

Assessing Vertical Allocation of Wildfire Smoke Emissions Using Observational Constraints From Airborne Lidar in the Western U.S

Wildfire emissions are a key contributor of carbonaceous aerosols and trace gases to the atmosphere. Induced by buoyant lifting, smoke plumes can be injected into the free troposphere and lower stratosphere, which by consequence significantly affects the magnitude and distance of their influences on air quality and radiation budget. However, the vertical allocation of emissions when smoke escapes the planetary boundary layer (PBL) and the mechanism modulating it remain unclear. We present an inverse modeling framework to estimate the wildfire emissions, with their temporal and vertical evolution being constrained by assimilating aerosol extinction profiles observed from the airborne Differential Absorption Lidar-High Spectral Resolution Lidar during the Fire Influence on Regional to Global Environments and Air Quality field campaign. Three fire events in the western U.S., which exhibit free-tropospheric injections are examined. The constrained smoke emissions indicate considerably larger fractions of smoke injected above the PBL (f _>PBL, 80%-94%) versus the column total, compared to those estimated by the WRF-Chem model using the default plume rise option (12%-52%). The updated emission profiles yield improvements for the simulated vertical structures of the downwind transported smoke, but limited refinement of regional smoke aerosol optical depth distributions due to the spatiotemporal coverage of flight observations. These results highlight the significance of improving vertical allocation of fire emissions on advancing the modeling and forecasting of the environmental impacts of smoke.

Carbon dioxide and particulate emissions from the 2013 Tasmanian firestorm: implications for Australian carbon accounting

BACKGROUND

Uncontrolled wildfires in Australian temperate Eucalyptus forests produce significant smoke emissions, particularly carbon dioxide (CO₂) and particulates. Emissions from fires in these ecosystems, however, have received less research attention than the fires in North American conifer forests or frequently burned Australian tropical savannas. Here, we use the 2013 Forcett-Dunalley fire that caused the first recorded pyrocumulonimbus event in Tasmania, to understand CO₂ and particulate matter (PM_2.5) emissions from a severe Eucalyptus forest fire. We investigate the spatial patterns of the two emissions using a fine scale mapping of vegetation and fire severity (50 m resolution), and utilising available emission factors suitable for Australian vegetation types. We compare the results with coarse-scale (28 km resolution) emissions estimates from Global Fire Emissions Database (GFED) to determine the reliability of the global model in emissions estimation.

RESULTS

The fine scale inventory yielded total CO₂ emission of 1.125 ± 0.232 Tg and PM_2.5 emission of 0.022 ± 0.006 Tg, representing a loss of 56 t CO₂ ha^-1 and 1 t PM_2.5 ha^-1. The CO₂ emissions were comparable to GFED estimates, but GFED PM_2.5 estimates were lower by a factor of three. This study highlights the reliability of GFED for CO₂ but not PM_2.5 for estimating emissions from Eucalyptus forest fires. Our fine scale and GFED estimates showed that the Forcett-Dunalley fire produced 30% of 2013 fire carbon emissions in Tasmania, and 26-36% of mean annual fire emissions for the State, representing a significant single source of emissions.

CONCLUSIONS

Our analyses highlight the need for improved PM_2.5 emission factors specific to Australian vegetation, and better characterisation of fuel loads, particularly coarse fuel loads, to quantify wildfire particulate and greenhouse gas emissions more accurately. Current Australian carbon accountancy approach of excluding large wildfires from final GHG accounts likely exaggerates Tasmania's claim to carbon neutrality; we therefore recommend that planned and unplanned emissions are included in the final national and state greenhouse gas accounting to international conventions. Advancing these issues is important given the trajectory of more frequent large fires driven by anthropogenic climate change.

Biomass Burning Over the United States East Coast and Western North Atlantic Ocean: Implications for Clouds and Air Quality

Biomass burning (BB) aerosol events were characterized over the U.S. East Coast and Bermuda over the western North Atlantic Ocean (WNAO) between 2005 and 2018 using a combination of ground-based observations, satellite data, and model outputs. Days with BB influence in an atmospheric column (BB days) were identified using criteria biased toward larger fire events based on anomalously high AERONET aerosol optical depth (AOD) and MERRA-2 black carbon (BC) column density. BB days are present year-round with more in June-August (JJA) over the northern part of the East Coast, in contrast to more frequent events in March-May (MAM) over the southeast U.S. and Bermuda. BB source regions in MAM are southern Mexico and by the Yucatan, Central America, and the southeast U.S. JJA source regions are western parts of North America. Less than half of the BB days coincide with anomalously high PM2.5 levels in the surface layer, according to data from 14 IMPROVE sites over the East Coast. Profiles of aerosol extinction suggest that BB particles can be found in the boundary layer and into the upper troposphere with the potential to interact with clouds. Higher cloud drop number concentration and lower drop effective radius are observed during BB days. In addition, lower liquid water path is found during these days, especially when BB particles are present in the boundary layer. While patterns are suggestive of cloud-BB aerosol interactions over the East Coast and the WNAO, additional studies are needed for confirmation.

Impact of various air mass types on cloud condensation nuclei concentrations along coastal southeast Florida

Coastal southeast Florida experiences a wide range of aerosol conditions, including African dust, biomass burning (BB) aerosols, as well as sea salt and other locally-emitted aerosols. These aerosols are important sources of cloud condensation nuclei (CCN), which play an essential role in governing cloud radiative properties. As marine environments dominate the surface of Earth, CCN characteristics in coastal southeast Florida have broad implications for other regions with the added feature that this site is perturbed by both natural and anthropogenic emissions. This study investigates the influence of different air mass types on CCN concentrations at 0.2% (CCN_0.2%) and 1.0% (CCN_1.0%) supersaturation (SS) based on ground site measurements during selected months in 2013, 2017, and 2018. Average CCN_0.2% and CCN_1.0% concentrations were 373 ± 200 cm^-3 and 584 ± 323 cm^-3, respectively, for four selected days with minimal presence of African dust and BB (i.e., background days). CCN concentrations were not elevated on the four days with highest influence of African dust (289 ± 104 cm^-3 [0.2% SS] and 591 ± 302 cm^-3 [1.0% SS]), consistent with high dust mass concentrations comprised of coarse particles that are few in number. In contrast, CCN concentrations were substantially enhanced on the five days with the greatest impact from BB (1408 ± 976 cm^-3 [0.2% SS] and 3337 ± 1252 cm^-3 [1.0% SS]). Ratios of CCN_0.2%:CCN_1.0% were used to compare the hygroscopicity of the aerosols associated with African dust, BB, and background days. Average ratios were similar for days impacted by African dust and BB (0.54 ± 0.17 and 0.55 ± 0.17, respectively). A 29% higher average ratio was observed on background days (0.71 ± 0.14), owing in part to a strong presence of sea salt and reduced presence of more hydrophobic species such as those of a carbonaceous or mineral-dust nature. Finally, periods of heavy rainfall were shown to effectively decrease both CCN_0.2% and CCN_1.0% concentrations. However, the rate varied at which such concentrations increased after the rain. This work contributes knowledge on the nucleating ability of African dust and BB in a marine environment after varying periods of atmospheric transport (days to weeks). The results can be used to understand the hygroscopicity of these air mass types, predict how they may influence cloud properties, and provide a valuable model constraint when predicting CCN concentrations in comparable situations.

Biomass Burning Smoke Climatology of the United States: Implications for Particulate Matter Air Quality

We utilize the NOAA Hazard Mapping System smoke product for the period of 2005 to 2016 to develop climatology of smoke occurrence over the Continental United States (CONUS) region and to study the impact of wildland fires on particulate matter air quality at the surface. Our results indicate that smoke is most frequently found over the Great Plains and western states during the summer months. Other hotspots of smoke occurrence are found over state and national parks in the southeast during winter and spring, in the Gulf of Mexico southwards of the Texas and Louisiana coastline during spring season and along the Mississippi River Delta during the fall season. A substantial portion (20%) of the 24 h federal standard for particulate pollution exceedance events in the CONUS region occur when smoke is present. If the U.S. Environmental Protection Agency regulations continue to reduce anthropogenic emissions, wildland fire emissions will become the major contributor to particulate pollution and exceedance events. In this context, we show that HMS smoke product is a valuable tool for analysis of exceptional events caused by wildland fires and our results indicate that these tools can be valuable for policy and decision makers.

Assessment of biomass burning smoke influence on environmental conditions for multi-year tornado outbreaks by combining aerosol-aware microphysics and fire emission constraints

We use the WRF system to study the impacts of biomass burning smoke from Central America on several tornado outbreaks occurring in the US during spring. The model is configured with an aerosol-aware microphysics parameterization capable of resolving aerosol-cloud-radiation interactions in a cost-efficient way for numerical weather prediction (NWP) applications. Primary aerosol emissions are included and smoke emissions are constrained using an inverse modeling technique and satellite-based AOD observations. Simulations turning on and off fire emissions reveal smoke presence in all tornado outbreaks being studied and show an increase in aerosol number concentrations due to smoke. However, the likelihood of occurrence and intensification of tornadoes is higher due to smoke only in cases where cloud droplet number concentration in low level clouds increases considerably in a way that modifies the environmental conditions where the tornadoes are formed (shallower cloud bases and higher low-level wind shear). Smoke absorption and vertical extent also play a role, with smoke absorption at cloud-level tending to burn-off clouds and smoke absorption above clouds resulting in an increased capping inversion. Comparing these and WRF-Chem simulations configured with a more complex representation of aerosol size and composition and different optical properties, microphysics and activation schemes, we find similarities in terms of the simulated aerosol optical depths and aerosol impacts on near-storm environments. This provides reliability on the aerosol-aware microphysics scheme as a less computationally expensive alternative to WRF-Chem for its use in applications such as NWP and cloud-resolving simulations.

Remote sensing of particulate pollution from space: have we reached the promised land?

The recent literature on satellite remote sensing of air quality is reviewed. 2009 is the 50th anniversary of the first satellite atmospheric observations. For the first 40 of those years, atmospheric composition measurements, meteorology, and atmospheric structure and dynamics dominated the missions launched. Since 1995, 42 instruments relevant to air quality measurements have been put into orbit. Trace gases such as ozone, nitric oxide, nitrogen dioxide, water, oxygen/tetraoxygen, bromine oxide, sulfur dioxide, formaldehyde, glyoxal, chlorine dioxide, chlorine monoxide, and nitrate radical have been measured in the stratosphere and troposphere in column measurements. Aerosol optical depth (AOD) is a focus of this review and a significant body of literature exists that shows that ground-level fine particulate matter (PM2.5) can be estimated from columnar AOD. Precision of the measurement of AOD is +/-20% and the prediction of PM2.5 from AOD is order +/-30% in the most careful studies. The air quality needs that can use such predictions are examined. Satellite measurements are important to event detection, transport and model prediction, and emission estimation. It is suggested that ground-based measurements, models, and satellite measurements should be viewed as a system, each component of which is necessary to better understand air quality.