Radioactivity of the atmospheric aerosols detected by CTBTO stations in Africa following the accident at the Fukushima Daiichi nuclear power plant

Radionuclides from the reactor accident Fukushima Daiichi nuclear power plant were observed in the airborne aerosols at CTBT International Monitoring System (IMS) stations (MRP43, CMP13) in Africa. The maximum activity concentrations in the air measured in Mauritania were 186.44 10-6 Bq.m-3, 264.16 10-6 Bq.m-3 and 1269.94 10-6 Bq.m-3 for 134Cs, 137Cs and 131I respectively, and in Cameroon 16.42 10-6 Bq.m-3, 25.53 10-6 and 37.58 10-6 Bq.m-3 respectively for 134Cs, 137Cs and 131I. The activity ratio of 134Cs/137Cs is almost constant throughout the period of time relevant to this study due to their long half-lives of 30.2 years for 137Cs and 2.06 years for 134Cs. Whereas the 131I/137Cs activity ratio varies in time according to the radioactive decay with a half-live of 8.06 days for 131I and different removal rates of both radionuclides from the atmosphere during transport. The EMAC atmospheric chemistry-general circulation was used to simulate the emission and transport of the isotope 137Cs and map the deposition of the 137Cs deposition over Africa.

Estimated greenhouse gas emissions in the Mbalmayo thermal power plant between 2016-2020 using the genetic-Gaussian algorithm coupling

The greenhouse gas (GHG) emissions inventories in our context result from the production of electricity from fuel oil at the Mbalmayo thermal power plant between 2016 and 2020. Our study area is located in the Central Cameroon region. The empirical method of the second level of industrialisation was applied to estimate GHG emissions and the application of the genetic algorithm-Gaussian (GA-Gaussian) coupling method was used to optimise the estimation of GHG emissions. Our work is of an experimental nature and aims to estimate the quantities of GHG produced by the Mbalmayo thermal power plant during its operation. The search for the best objective function using genetic algorithms is designed to bring us closer to the best concentration, and the Gaussian model is used to estimate the concentration level. The results obtained show that the average monthly emissions in kilograms (kg) of GHGs from the Mbalmayo thermal power plant are: 526 kg for carbon dioxide (CO2), 971.41 kg for methane (CH4) and 309.41 kg for nitrous oxide (N2O), for an average monthly production of 6058.12 kWh of energy. Evaluation of the stack height shows that increasing the stack height helps to reduce local GHG concentrations. According to the Cameroonian standards published in 2021, the limit concentrations of GHGs remain below 30 mg/m3 for CO2 and 200 μg/m3 for N2O, while for CH4 we reach the limit value of 60 μg/m3. These results will enable the authorities to take appropriate measures to reduce GHG concentrations.

Mode of Atmospheric Deposition in Forests Demonstrates Notable Differences in Initial Radiocesium Behavior

The March 2011 Fukushima Dai-ichi Nuclear Power Plant accident in Japan released 520 PBq of radionuclides compared to a total release of 5300 PBq from the Chornobyl Nuclear Power Plant accident. Both nuclear accidents resulted in deposition of radiocesium throughout the northern hemisphere, and a plethora of studies have been performed regarding radiocesium (¹³⁷Cs) behavior. However, few studies have assessed the impact of precipitation on ¹³⁷Cs deposition in forests. Wide-scale environmental measurements from 2011 and 2016 were used to determine the differences in ¹³⁷Cs deposition because of precipitation following the Fukushima accident. In areas where wet deposition processes were dominant, dense forests generally had lower ambient dose rates and levels of contamination on forest floors than other stands with fewer stems per hectare in 2011. Similar tendencies were not observed in areas that were primarily subject to dry deposition nor were any trends observed in 2016. ¹³⁷Cs was retained in dense forest canopies for an extended period regardless of the deposition mode. Additionally, it was found that the initial retention of radionuclides by forest canopies is in general higher for areas with predominantly dry deposition. Incorporation of radiocesium into wood tissues was the same for both wet and dry deposition.

Interaction process between gaseous CH3I and NaCl particles: implication for iodine dispersion in the atmosphere

Gaseous iodomethane (CH₃I) is naturally emitted into the atmosphere by biological activity in oceans and during severe accidents (SAs) in nuclear power plants. In this latter case, a part of radioactive iodine such as ¹³¹I may be released. Improving the knowledge of CH₃I transport and reactivity in the atmosphere is important since they are strongly linked to first the cycle of ozone and second to the dispersion of radioactive CH₃I with potential radiological consequences on both the environment and human health. Here, the interaction process of CH₃I with NaCl as a surrogate of atmospheric aerosols was investigated under ambient air conditions by using Diffuse Reflectance Fourier Transform Spectroscopy (DRIFTS). The DRIFTS spectra of NaCl clearly evidenced CH₃I adsorption on the NaCl particle surface. A part of CH₃I ((1.68 ± 0.85) × 10¹⁴ molecule per mg_NaCl) was found to be strongly bonded to NaCl since no desorption was observed. The CH₃I adsorption on the NaCl surface presented a 1^st order kinetics relative to its gas phase concentration. The uptake coefficient was determined to be in the order of 10^-11. These results show a low probability of CH₃I to be taken up by halide-containing aerosols. These data are crucial for completing the iodine atmospheric chemical scheme.

Potential Source Apportionment and Meteorological Conditions Involved in Airborne 131I Detections in January/February 2017 in Europe

Traces of particulate radioactive iodine (¹³¹I) were detected in the European atmosphere in January/February 2017. Concentrations of this nuclear fission product were very low, ranging 0.1 to 10 μBq m^-3 except at one location in western Russia where they reached up to several mBq m^-3. Detections have been reported continuously over an 8-week period by about 30 monitoring stations. We examine possible emission source apportionments and rank them considering their expected contribution in terms of orders of magnitude from typical routine releases: radiopharmaceutical production units > sewage sludge incinerators > nuclear power plants > spontaneous fission of uranium in soil. Inverse modeling simulations indicate that the widespread detections of ¹³¹I resulted from the combination of multiple source releases. Among them, those from radiopharmaceutical production units remain the most likely. One of them is located in Western Russia and its estimated source term complies with authorized limits. Other existing sources related to ¹³¹I use (medical purposes or sewage sludge incineration) can explain detections on a rather local scale. As an enhancing factor, the prevailing wintertime meteorological situations marked by strong temperature inversions led to poor dispersion conditions that resulted in higher concentrations exceeding usual detection limits in use within the informal Ring of Five (Ro5) monitoring network.

Source localisation and its uncertainty quantification after the third DPRK nuclear test

The International Monitoring System is being set up aiming to detect violations of the Comprehensive Nuclear-Test-Ban Treaty. Suspicious radioxenon detections were made by the International Monitoring System after the third announced nuclear test conducted by the Democratic People’s Republic of Korea (DPRK). In this paper, inverse atmospheric transport and dispersion modelling was applied to these detections, to determine the source location, the release term and its associated uncertainties. The DPRK nuclear test site was found to be a likely source location, though a second likely source region in East Asia was found by the inverse modelling, partly due to the radioxenon background from civilian sources. Therefore, techniques to indirectly assess the influence of the radioxenon background are suggested. In case of suspicious radioxenon detections after a man-made explosion, atmospheric transport and dispersion modelling is a powerful tool for assessing whether the explosion could have been nuclear or not.

First retrieval of hourly atmospheric radionuclides just after the Fukushima accident by analyzing filter-tapes of operational air pollution monitoring stations

No observed data have been found in the Fukushima Prefecture (FP) for the time-series of atmospheric radionuclides concentrations just after the Fukushima Daiichi Nuclear Power Plant (FD1NPP) accident. Accordingly, current estimates of internal radiation doses from inhalation, and atmospheric radionuclide concentrations by atmospheric transport models are highly uncertain. Here, we present a new method for retrieving the hourly atmospheric ¹³⁷Cs concentrations by measuring the radioactivity of suspended particulate matter (SPM) collected on filter tapes in SPM monitors which were operated even after the accident. This new dataset focused on the period of March 12–23, 2011 just after the accident, when massive radioactive materials were released from the FD1NPP to the atmosphere. Overall, 40 sites of the more than 400 sites in the air quality monitoring stations in eastern Japan were studied. For the first time, we show the spatio-temporal variation of atmospheric ¹³⁷Cs concentrations in the FP and the Tokyo Metropolitan Area (TMA) located more than 170 km southwest of the FD1NPP. The comprehensive dataset revealed how the polluted air masses were transported to the FP and TMA, and can be used to re-evaluate internal exposure, time-series radionuclides release rates, and atmospheric transport models.

Assessment of dry and wet atmospheric deposits of radioactive aerosols: application to Fukushima radiocaesium fallout

The Fukushima Dai-ichi nuclear accident led to massive atmospheric deposition of radioactive substances onto the land surfaces. The spatial distribution of deposits has been estimated by Japanese authorities for gamma-emitting radionuclides through either airborne monitoring surveys (since April 2011) or in situ gamma-ray spectrometry of bare soil areas (since summer 2011). We demonstrate that significant differences exist between the two surveys for radiocaesium isotopes and that these differences can be related to dry deposits through the use of physically based relationships involving aerosol deposition velocities. The methodology, which has been applied to cesium-134 and cesium-137 deposits within 80-km of the nuclear site, provides reasonable spatial estimations of dry and wet deposits that are discussed and compared to atmospheric numerical simulations from the Japanese Atomic Energy Agency and the French Institute of Radioprotection and Nuclear Safety. As a complementary approach to numerical simulations, this field-based analysis has the possibility to contribute information that can be applied to the understanding and assessment of dose impacts to human populations and the environment around Fukushima.

Southward spreading of the Fukushima-derived radiocesium across the Kuroshio Extension in the North Pacific

The accident of the Fukushima Dai-ichi nuclear power plant in March 2011 released a large amount of radiocesium into the North Pacific Ocean. Vertical distributions of Fukushima-derived radiocesium were measured at stations along the 149°E meridian in the western North Pacific during the winter of 2012. In the subtropical region, to the south of the Kuroshio Extension, we found a subsurface radiocesium maximum at a depth of about 300 m. It is concluded that atmospheric-deposited radiocesium south of the Kuroshio Extension just after the accident had been transported not only eastward along with surface currents but also southward due to formation/subduction of subtropical mode waters within about 10 months after the accident. The total amount of decay-corrected ¹³⁴Cs in the mode water was an estimated about 6 PBq corresponding to 10–60% of the total inventory of Fukushima-derived ¹³⁴Cs in the North Pacific Ocean.

Emission of spherical cesium-bearing particles from an early stage of the Fukushima nuclear accident

The Fukushima nuclear accident released radioactive materials into the environment over the entire Northern Hemisphere in March 2011, and the Japanese government is spending large amounts of money to clean up the contaminated residential areas and agricultural fields. However, we still do not know the exact physical and chemical properties of the radioactive materials. This study directly observed spherical Cs-bearing particles emitted during a relatively early stage (March 14–15) of the accident. In contrast to the Cs-bearing radioactive materials that are currently assumed, these particles are larger, contain Fe, Zn, and Cs, and are water insoluble. Our simulation indicates that the spherical Cs-bearing particles mainly fell onto the ground by dry deposition. The finding of the spherical Cs particles will be a key to understand the processes of the accident and to accurately evaluate the health impacts and the residence time in the environment.