Template-imprinted nanostructured surfaces for protein recognition

Zwitterionic Molecularly Imprinted Hairy Cellulose Nanocrystals Enable Selective Vancomycin Removal

Access to free, off-target, and nontherapeutic doses of antibiotics is a key driving factor in the emergence of antimicrobial resistance (AMR). Intravenously (IV) administered vancomycin (VAN) is among the last-line antibiotics for treating infections caused by multidrug-resistant Gram-positive bacteria. A fraction of the total IV dose unwantedly reaches the gastrointestinal tract, driving AMR. Selective VAN removal from the complex intestinal fluid may reduce the probability of AMR emergence; however, it remains a significant challenge due to the competitive adsorption of other species. Here, we engineer novel VAN-imprinted polymerized zwitterionic hairy cellulose nanocrystals (ViPZ-HCNC) that selectively capture VAN with a removal capacity of ∼ 235 mg g-1 at an imprinting factor of ∼ 7.5. ViPZ-HCNC provide the first nanocellulose-based material with an excellent selectivity for VAN against lysine, lysozyme, and bovine serum albumin, which efficiently remove VAN from calcium ion-containing solutions and simulated intestinal fluids. Additionally, ViPZ-HCNC are not toxic against NIH/3T3 murine fibroblast cells. We envision that ViPZ-HCNC may pave the way for developing soft materials that selectively remove off-target VAN from a broad range of media, preventing VAN resistance evolution. This research is a step forward in addressing the long-lasting AMR challenge using a biobased platform.

Nature-Inspired Engineering Separation Materials and Devices

Separation is a fundamental process in natural living systems. Their separation capabilities have inspired the design of various separation materials and devices. Despite some progress having been made, a comprehensive overview is still lacking. In this Perspective, we first review the development of separation technologies. We then summarize some typical living systems exhibiting superior separation capabilities from compositions and microstructures to separation mechanisms. Next, we highlight key advancements in nature-inspired separation materials and integrated devices. Finally, we propose future research directions and opportunities, emphasizing the importance of physical and chemical design and internal and external stimulus regulation. These nature-inspired materials and devices show great potential in biomedicine, environmental remediation, energy conversion, food safety, and analysis testing.

Rationally Engineered Bispecific Nanoimmunoblocker Restores Anticancer Immunity via Dual Immune Checkpoint Blockade

Immune checkpoint blockade (ICB) therapy has revolutionized cancer treatment. However, the outcomes of mainstay antibody inhibitors against solid tumors remain poor, facing tremendous challenges including manufacturing complexities, serious toxicities, and crosstalk among multiple checkpoints. Herein, we present a bispecific molecularly imprinted nanoimmunoblocker (bsMINIB) designed to boost potent antitumor immunity via synchronously blocking innate and adaptive immune checkpoints. Two epitopes for PD-L1 and SIRPα are selected as templates through structural analysis, and thereafter, bsMINIB capable of bridging tumor cells and macrophages is rationally engineered via an advanced imprinting approach. The bsMINIB exhibits high affinity and specificity toward PD-L1 on solid tumor cells and SIRPα on macrophages, allowing effective disruption of both PD-L1/PD-1 and CD47/SIRPα signaling. These signal disruptions restore macrophage-mediated tumor phagocytosis, promote tumor-associated antigen presentation, and reinvigorate T cell-mediated tumor killing. Using refractory triple-negative breast cancer as a solid tumor model, the bsMINIB demonstrates extended retention at the tumor site, amplified infiltration of active T cells, and reactivated antitumor macrophages, thereby effectively inhibiting tumor growth. This biomimetic nanoimmunoblocker not only presents an effective multipronged ICB therapeutic against solid tumors but also showcases a compelling paradigm for the rational engineering of bispecific nanoplatforms for synergistic immunotherapy through molecular imprinting.

Oriented surface imprinting of epitopes anchored on silica nanoparticles containing quantum dots by thiol-disulfide exchange reactions for the enhanced fluorescence detection of proteins

As artificial receptors for protein recognition, epitope-imprinted polymers combined with fluorescence sensing based on quantum dots (QDs) can be potentially used for biological analysis and disease diagnosis. However, the usual way for fabrication of QD sensors through unoriented epitope imprinting is confronted with the problems of disordered imprinting sites and low template utilization. In this context, a facile and efficient oriented epitope surface imprinting was put forward based on immobilization of the epitope templates via thiol-disulfide exchange reactions. With N-succinimidyl 3-(2-pyridyldithio)-propionate (SPDP) as a heterobifunctional reagent, cysteine-modified epitopes of cytochrome c were anchored on the surface of pyridyl disulfide functionalized silica nanoparticles sandwiching CdTe QDs. After surface imprinting via a sol-gel process, the epitope templates were removed from the surface-imprinted layers simply by reduction of the thiol-disulfide, affording oriented epitope-imprinted sites. By this method, the amount of epitope templates was only 1/20 of traditionally unoriented epitopes. The resulting sensors demonstrated significantly enhanced imprinting performance and high sensitivity, with the imprinting factor increasing from 2.6 to 3.9, and the limit of detection being 91 nM. Such epitope-oriented surface-imprinted method may offer a new design strategy for the construction of high-affinity protein recognition nanomaterials with fluorescence sensing.

Mechanism of high sensitivity proton acids doped polypyrrole molecularly imprinted electrochemical sensor and its application in urea detection

Molecularly imprinted electrochemical sensor is a kind of convenient, fast, and stable analyzer, but the conductivity of electrode materials and their affinity with the analyte affect its performance. A proton acid (PSS, SA, SSA) doping method was proposed to improve the electrochemical performance of the polypyrrole molecularly imprinted polymer (PPy-MIP), which promoted the electropolymerization of pyrrole, reduced the charge transfer resistance, and increased the electrochemical surface area. In terms of both improving conductivity and affinity, the response of the proton acids doped the polypyrrole molecularly imprinted electrochemical sensors (PPy-MIECS) to urea was improved by 25-fold (PSS), 5-fold (SA), and 3-fold (SSA) over that of PPy-MIECS. In addition, the PSS-PPy-MIECS was validated for the practical application with a linear detection range from 0.1 mM to 100 mM, high selectivity (α = 39.73), reusability (RSD% = 4.54 %), reproducibility (RSD% = 0.93 %), and stability (11 days). The advantage of proton acid doping method in PSS-PEDOT-MIECS to urea and PSS-PPy-MIECS to glucose extended its application in the performance enhancement of MIECS design.

Preparation and Utilization of a Highly Discriminative Absorbent Imprinted with Fetal Hemoglobin

Development in hemoglobin-based oxygen carriers (HBOCs) that may be used as alternatives to donated blood requires an extensive supply of highly pure hemoglobin (Hb) preparations. Therefore, it is essential to fabricate inexpensive, stable and highly selective absorbents for Hb purification. Molecular imprinting is an attractive technology for preparing such materials for targeted molecular recognition and rapid separations. In this case study, we developed human fetal hemoglobin (HbF)-imprinted polymer beads through the fusion of surface imprinting and Pickering emulsion polymerization. HbF was firstly covalently coupled to silica nanoparticles through its surface-exposed amino groups. The particle-supported HbF molecules were subsequently employed as templates for the synthesis of molecularly imprinted polymers (MIPs) with high selectivity for Hb. After removing the silica support and HbF, the resulting MIPs underwent equilibrium and kinetic binding experiments with both adult Hb (HbA) and HbF. These surface-imprinted MIPs exhibited excellent selectivity for both HbA and HbF, facilitating the one-step isolation of recombinant Hb from crude biological samples. The saturation capacities of HbA and HbF were found to be 15.4 and 17.1 mg/g polymer, respectively. The present study opens new possibilities for designed resins for tailored protein purification, separation and analysis.

A Highly Efficient Fluorescent Turn-Off Nanosensor for Quantitative Detection of Teicoplanin Antibiotic from Humans, Food, and Water Based on the Electron Transfer between Imprinted Quantum Dots and the Five-Membered Cyclic Boronate Esters

Teicoplanin has been banned in the veterinary field due to the drug resistance of antibiotics. However, teicoplanin residue from the antibiotic abuse of humans and animals poses a threat to people's health. Therefore, it is necessary to develop an efficient way for the highly accurate and reliable detection of teicoplanin from humans, food, and water. In this study, novel imprinted quantum dots of teicoplanin were prepared based on boronate affinity-based precisely controlled surface imprinting. The imprinting factor (IF) for teicoplanin was evaluated and reached a high value of 6.51. The results showed excellent sensitivity and selectivity towards teicoplanin. The relative fluorescence intensity was inversely proportional to the concentration of teicoplanin, in the range of 1.0-17 μM. And its limit of detection (LOD) was obtained as 0.714 μM. The fluorescence quenching process was mainly controlled by a static quenching mechanism via the non-radiative electron-transfer process between QDs and the five-membered cyclic boronate esters. The recoveries for the spiked urine, milk, and water samples ranged from 95.33 to 104.17%, 91.83 to 97.33, and 94.22 to 106.67%, respectively.

Fundamentals, Synthetic Strategies and Applications of Non-Covalently Imprinted Polymers

Molecular imprinting has emerged as an important and practical technology to create economical and stable synthetic mimics of antibodies and enzymes. It has already found a variety of important applications, such as affinity separation, chemical/biological sensing, disease diagnostics, proteomics, bioimaging, controlled drug release, and catalysis. In the past decade, significant breakthroughs have been made in non-covalently imprinted polymers, from their synthesis through to their applications. In terms of synthesis, quite a few versatile and facile imprinting approaches for preparing MIPs have been invented, which have effectively solved some key issues in molecular imprinting. Additionally, important applications in several areas, such as sensors, proteomics and bioimaging, have been well demonstrated. In this review, we critically and comprehensively survey key recent advances made in the preparation of non-covalently imprinted polymers and their important applications. We focus on the state-of-art of this technology from three different perspectives: fundamentals, synthetic strategies, and applications. We first provide a fundamental basis for molecular imprinting technologies that have been developed, which is extremely helpful for establishing a sound understanding of the challenges in molecular imprinting. Then, we discuss in particular the major breakthroughs within the last ten years (2014-2024), with emphasis on new imprinting approaches, what strengths the breakthroughs can provide, and which new applications the properties of the prepared non-covalently imprinted polymers are fit for.

Study on the creation of boronate affinity-based oriented imprinted silica nanoparticles and their selective recognition toward glycopeptide antibiotics in food and water

Taking into account the drug resistance of antibiotics, teicoplanin has been banned in the veterinary field. Also, it brings threat to people's health when they eat foods containing teicoplanin residue. In addition, the abuse of teicoplanin in humans and food animals also poses a potential risk to water. Therefore, it is crucial to purify teicoplanin from food before quantifying its amount. In this study, researchers employed boronate affinity-based controlled oriented surface imprinting technique to produce molecularly imprinted polymers (MIPs) for the isolation of teicoplanin. The 3-fluoro-4-formylphenylboronic acid-functionalized silica nanoparticle substrate was first used as the supporting material for immobilizing teicoplanin. Next, the substrate surface was coated with an imprinting coating whose thickness could be controlled, produced through the self-copolymerization of dopamine and m-aminophenylboronic acid (APBA) in water. After the template was removed, 3D cavities that matched the template were created in the imprinting layer. The prepared teicoplanin-imprinted silica nanoparticles exhibited several significant satisfactory results such as good specificity, high binding capacity (46.9 ± 2.3 mg g-1), moderate binding constant ((5.46 ± 0.18) × 10-5 M-1), fast kinetics (8 min) and low binding pH (pH 5.0) toward teicoplanin. The teicoplanin-imprinted silica nanoparticles could still be reused after seven cycles of adsorption-desorption, which indicated a high chemical stability. In addition, recoveries of the proposed method for teicoplanin at three spiked levels in milk and water ranged from 91.8 to 105.6% and 92.3 to 97.4%, respectively. The teicoplanin-imprinted silica nanoparticles are capable of identifying the target teicoplanin in real samples in a simple, fast, selective and efficient manner.

Molecularly imprinted polymers for sensing/depleting human serum albumin (HSA): A critical review of recent advances and current challenges

Human serum albumin (HSA) is an essential biomacromolecule in the blood circulatory system because it carries numerous molecules, including fatty acids (FAs), bilirubin, metal ions, hormones, and different pharmaceuticals, and plays a significant role in regulating blood osmotic pressure. Fluctuations in HSA levels in human biofluids, particularly urine and serum, are associated with several disorders, such as elevated blood pressure, diabetes mellitus (DM), liver dysfunction, and a wide range of renal diseases. Thus, the ability to quickly and accurately measure HSA levels is important for the rapid identification of these disorders in human populations. Molecularly imprinted polymers (MIPs), well known as artificial antibodies (Abs), have been extensively used for the quantitative detection of small molecules and macromolecules, especially HSA, in recent decades. This review highlights major challenges and recent developments in the application of MIPs to detect HSA in artificial and real samples. The fabrication and application of various MIPs for the depletion of HSA are also discussed, as well as different MIP preparation approaches and strategies for overcoming obstacles that hinder the development of MIPs with high efficiency and recognition capability for HSA determination/depletion.

Glycan-Imprinted Nanoparticle as Artificial Neutralizing Antibody for Efficient HIV-1 Recognition and Inhibition

The HIV-1 envelope is a heavily glycosylated class 1 trimeric fusion protein responsible for viral entry into CD4+ immune cells. Developing neutralizing antibodies against the specific envelope glycans is an alternative method for antiviral therapies. This work presents the first-ever development and characterization of artificial neutralizing antibodies using molecular imprinting technology to recognize and bind to the envelope protein of HIV-1. The prepared envelope glycan-imprinted nanoparticles (GINPs) can successfully prevent HIV-1 from infecting target cells by shielding the glycans on the envelope protein. In vitro experiments showed that GINPs have strong affinity toward HIV-1 (Kd = 36.7 ± 2.2 nM) and possess high anti-interference and specificity. GINPs demonstrate broad inhibition activity against both tier 1 and tier 2 HIV-1 strains with a pM-level IC50 and exhibit a significant inhibitory effect on long-term viral replication by more than 95%. The strategy provides a promising method for the inhibition and therapy of HIV-1 infection.

Glycan-specific molecularly imprinted polymers towards cancer diagnostics: merits, applications, and future perspectives

Aberrant glycans are a hallmark of cancer states. Notably, emerging evidence has demonstrated that the diagnosis of cancers with tumour-specific glycan patterns holds great potential to address unmet medical needs, especially in improving diagnostic sensitivity and selectivity. However, despite vast glycans having been identified as potent markers, glycan-based diagnostic methods remain largely limited in clinical practice. There are several reasons that prevent them from reaching the market, and the lack of anti-glycan antibodies is one of the most challenging hurdles. With the increasing need for accelerating the translational process, numerous efforts have been made to find antibody alternatives, such as lectins, boronic acids and aptamers. However, issues concerning affinity, selectivity, stability and versatility are yet to be fully addressed. Molecularly imprinted polymers (MIPs), synthetic antibody mimics with tailored cavities for target molecules, hold the potential to revolutionize this dismal progress. MIPs can bind a wide range of glycan markers, even those without specific antibodies. This capacity effectively broadens the clinical applicability of glycan-based diagnostics. Additionally, glycoform-resolved diagnosis can also be achieved through customization of MIPs, allowing for more precise diagnostic applications. In this review, we intent to introduce the current status of glycans as potential biomarkers and critically evaluate the challenges that hinder the development of in vitro diagnostic assays, with a particular focus on glycan-specific recognition entities. Moreover, we highlight the key role of MIPs in this area and provide examples of their successful use. Finally, we conclude the review with the remaining challenges, future outlook, and emerging opportunities.

Imprinted Polymers on the Route to Plastibodies for Biomacromolecules (MIPs), Viruses (VIPs), and Cells (CIPs)

Around 30% of the scientific papers published on imprinted polymers describe the recognition of proteins, nucleic acids, viruses, and cells. The straightforward synthesis from only one up to six functional monomers and the simple integration into a sensor are significant advantages as compared with enzymes or antibodies. Furthermore, they can be synthesized against toxic substances and structures of low immunogenicity and allow multi-analyte measurements via multi-template synthesis. The affinity is sufficiently high for protein biomarkers, DNA, viruses, and cells. However, the cross-reactivity of highly abundant proteins is still a challenge.

Molecularly Imprinted Polymers Using Yeast as a Supporting Substrate

Molecularly imprinted polymers (MIPs) have gained significant attention as artificial receptors due to their low cost, mild operating conditions, and excellent selectivity. To optimize the synthesis process and enhance the recognition performance, various support materials for molecular imprinting have been explored as a crucial research direction. Yeast, a biological material, offers advantages such as being green and environmentally friendly, low cost, and easy availability, making it a promising supporting substrate in the molecular imprinting process. We focus on the preparation of different types of MIPs involving yeast and elaborate on the specific roles it plays in each case. Additionally, we discuss the advantages and limitations of yeast in the preparation of MIPs and conclude with the challenges and future development trends of yeast in molecular imprinting research.

Stimulus-responsive nonclose-packed photonic crystals: fabrications and applications

Stimulus-responsive photonic crystals (PCs) possessing unconventional nonclosely packed structures have received growing attention due to their unique capability of mimicking the active structural colors of natural organisms (for example, chameleons' mechanochromic properties). However, there is rarely any systematic review regarding the progress of nonclose-packed photonic crystals (NPCs), involving their fabrication, working mechanisms, and applications. Herein, a comprehensive review of the fundamental principles and practical fabrication strategies of one/two/three-dimensional NPCs is summarized from the perspective of designing nonclose-packed structures. Subsequently, responsive NPCs with exciting functions and working mechanisms are sorted and delineated according to their diverse responses to physical (force, temperature, magnetic, and electric fields), chemical (ions, pH, vapors, and solvents), and biological (glucose, organophosphate, creatinine, and bacteria) stimuli. We then systematically introduced and discussed the applications of NPCs in sensors, printing, anticounterfeiting, display, optical devices, etc. Finally, the current challenges and development prospects for NPCs are presented. This review not only concludes the design principle for NPCs but also provides a significant basis for the exploration of next-generation NPCs.

Bovine Serum Albumin Molecularly Imprinted Electrochemical Sensors Modified by Carboxylated Multi-Walled Carbon Nanotubes/CaAlg Hydrogels

In this paper, sodium alginate (NaAlg) was used as functional monomers, bovine serum albumin (BSA) was used as template molecules, and calcium chloride (CaCl2) aqueous solution was used as a cross-linking agent to prepare BSA molecularly imprinted carboxylated multi-wall carbon nanotubes (CMWCNT)/CaAlg hydrogel films (MIPs) and non-imprinted hydrogel films (NIPs). The adsorption capacity of the MIP film for BSA was 27.23 mg/g and the imprinting efficiency was 2.73. The MIP and NIP hydrogel film were loaded on the surface of the printed electrode, and electrochemical performance tests were carried out by electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) using the electrochemical workstation. The loaded MIP film and NIP film effectively improved the electrochemical signal of the bare carbon electrode. When the pH value of the Tris HCl elution solution was 7.4, the elution time was 15 min and the adsorption time was 15 min, and the peak currents of MIP-modified electrodes and NIP-modified electrodes reached their maximum values. There was a specific interaction between MIP-modified electrodes and BSA, exhibiting specific recognition for BSA. In addition, the MIP-modified electrodes had good anti-interference, reusability, stability, and reproducibility. The detection limit (LOD) was 5.6 × 10-6 mg mL-1.

MALDI-TOF MS: A Promising Analytical Approach to Cancer Diagnostics and Monitoring

Cancer remains the second most common cause of death after cardiovascular diseases, accounting for nearly 10 million deaths in 2020. Although the incidence of cancer increases considerably with age, the cancer burden can also be reduced and have a high chance of cure through early detection, appropriate treatment, and care of patients. The development of high-throughput analytical approaches, like matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), contributes to identifying a pool of proteins/peptides as putative biomarkers for the early detection, diagnosis, and tumor progression. The purpose of the current review is to present an updated outline of recent proteome/peptidome research to establish putative cancer biomarkers using MALDI-TOF MS and highlight the applicability of statistical analysis in the oncology field. The pros and cons of MALDI-TOF MS application on cancer diagnostics and monitoring will be discussed, as well as compared with tandem mass spectrometry (MS/MS)-based proteomics (e.g., liquid chromatography–tandem mass spectrometry). In addition, pre-analytical (e.g., sample quality control) and analytical (e.g., sample pre-treatment, instrumental analytical conditions) properties that influence the robustness of MALDI-TOF MS data will be also discussed.

Recapitulating the Lateral Organization of Membrane Receptors at the Nanoscale

Many cell membrane functions emerge from the lateral presentation of membrane receptors. The link between the nanoscale organization of the receptors and ligand binding remains, however, mostly unclear. In this work, we applied surface molecular imprinting and utilized the phase behavior of lipid bilayers to create platforms that recapitulate the lateral organization of membrane receptors at the nanoscale. We used liposomes decorated with amphiphilic boronic acids that commonly serve as synthetic saccharide receptors and generated three lateral modes of receptor presentation─random distribution, nanoclustering, and receptor crowding─and studied their interaction with saccharides. In comparison to liposomes with randomly dispersed receptors, surface-imprinted liposomes resulted in more than a 5-fold increase in avidity. Quantifying the binding affinity and cooperativity proved that the boost was mediated by the formation of the nanoclusters rather than a local increase in the receptor concentration. In contrast, receptor crowding, despite the presence of increased local receptor concentrations, prevented multivalent oligosaccharide binding due to steric effects. The findings demonstrate the significance of nanometric aspects of receptor presentation and generation of multivalent ligands including artificial lectins for the sensitive and specific detection of glycans.

Hierarchically Structured Molecularly Imprinted Nanotransducers for Truncated HER2-Targeted Photodynamic Therapy of Therapeutic Antibody-Resistant Breast Cancer

Antibodies have been a mainstream class of therapeutics for clinical treatment of various diseases, especially cancers. However, mutation in cancer cells leads to resistance to therapeutic antibodies, hyperactivity of proliferation of cancer cells, and difficulty in the development of therapeutic antibodies. Herein, we present a strategy termed molecularly imprinted nanotransducer (MINT) for targeted photodynamic therapy (PDT) of mutated cancers. The MINT is a rationally engineered nanocomposite featuring a core of an upconversion nanoparticle, a shell of a thin layer of molecularly imprinted polymer, and a photosensitizer modified on the surface. As a proof-of-principle, truncated HER2 (P95HER2) overexpressed breast cancer, a challenging cancer lacking effective targeted therapeutics, was used as the cancer model. The designed structure, properties, functions, and anticancer efficacy of MINT were systematically investigated and experimentally confirmed. The MINT could not only specifically target P95HER2+ cancer cells in vitro and in vivo but also efficiently transfer the irradiated light and generate excited-state oxygen, resulting in efficient targeted cancer killing. Therefore, the MINT strategy provides a promising therapeutic for targeted PDT of drug-resistant cancers caused by target mutation.

Molecularly imprinted and cladded polymers for constructing a portable plasmonic immunoassay for peptides in biofluids

Using two molecularly imprinted and cladded polymers (cMIPs), an inexpensive, fast and portable plasmonic immuno-sandwich assay (PISA) was rationally developed for high-specificity and ultra-sensitive detection of C-peptide in urine. The dual cMIPs-based PISA allowed healthy individuals to be distinguished from diabetes patients and exhibited several significant merits over existing immunoassays, holding great promise in clinical diagnosis.

Molecularly Imprinted Polymers as Synthetic Antibodies for Protein Recognition: The Next Generation

Molecularly imprinted polymers (MIPs) are chemical antibody mimics obtained by nanomoulding the 3D shape and chemical functionalities of a desired target in a synthetic polymer. Consequently, they possess exquisite molecular recognition cavities for binding the target molecule, often with specificity and affinity similar to those of antigen-antibody interactions. Research on MIPs targeting proteins began in the mid-90s, and this review will evaluate the progress made till now, starting from their synthesis in a monolith bulk format through surface imprinting to biocompatible soluble nanogels prepared by solid-phase synthesis. MIPs in the latter format will be discussed more in detail because of their tremendous potential of replacing antibodies in the biomedical domain like in diagnostics and therapeutics, where the workforce of antibodies is concentrated. Emphasis is also put on the development of epitope imprinting, which consists of imprinting a short surface-exposed fragment of a protein, resulting in MIPs capable of selectively recognizing the whole macromolecule, amidst others in complex biological media, on cells or tissues. Thus selecting the 'best' peptide antigen is crucial and in this context a rational approach, inspired from that used to predict peptide immunogens for peptide antibodies, is described for its unambiguous identification.

Molecularly Imprinted Nanomaterials with Stimuli Responsiveness for Applications in Biomedicine

The review aims to summarize recent reports of stimuli-responsive nanomaterials based on molecularly imprinted polymers (MIPs) and discuss their applications in biomedicine. In the past few decades, MIPs have been proven to show widespread applications as new molecular recognition materials. The development of stimuli-responsive nanomaterials has successfully endowed MIPs with not only affinity properties comparable to those of natural antibodies but also the ability to respond to external stimuli (stimuli-responsive MIPs). In this review, we will discuss the synthesis of MIPs, the classification of stimuli-responsive MIP nanomaterials (MIP-NMs), their dynamic mechanisms, and their applications in biomedicine, including bioanalysis and diagnosis, biological imaging, drug delivery, disease intervention, and others. This review mainly focuses on studies of smart MIP-NMs with biomedical perspectives after 2015. We believe that this review will be helpful for the further exploration of stimuli-responsive MIP-NMs and contribute to expanding their practical applications especially in biomedicine in the near future.

Rational Development of Hypervalent Glycan Shield-Binding Nanoparticles with Broad-Spectrum Inhibition against Fatal Viruses Including SARS-CoV-2 Variants

Infectious virus diseases, particularly coronavirus disease 2019, have posed a severe threat to public health, whereas the developed therapeutic and prophylactic strategies are seriously challenged by viral evolution and mutation. Therefore, broad-spectrum inhibitors of viruses are highly demanded. Herein, an unprecedented antiviral strategy is reported, targeting the viral glycan shields with hypervalent mannose-binding nanoparticles. The nanoparticles exhibit a unique double-punch mechanism, being capable of not only blocking the virus-receptor interaction but also inducing viral aggregation, thereby allowing for inhibiting the virus entry and facilitating the phagocytosis of viruses. The nanoparticles exhibit potent and broad-spectrum antiviral efficacy to multiple pseudoviruses, including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its major variants (D614G, N501Y, N439K, Δ69-70, Delta, and Omicron; lentiviruses expressing only the spike proteins), as well as other vital viruses (human immunodeficiency virus 1 and Lassa virus), with apparent EC50 values around the 10^-9  m level. Significantly, the broad-spectrum inhibition of authentic viruses of both wild-type SARS-CoV-2 and Delta variants is confirmed. Therefore, this hypervalent glycan-shield targeting strategy opens new access to broad-spectrum viral inhibition.

The utility of molecularly imprinted polymers for mass spectrometric protein and proteomics analysis

Selective and efficient sample clean-up is important in mass spectrometric protein- and proteomics analyses from biological matrices. Molecularly imprinted polymers (MIPs), polymers prepared to have tailor-made cavities for capture of target analytes may by such represent an interesting alternative for selective clean-up. The present review aims to give an overview of the utility of MIPs for protein capture from biological matrices prior to mass spectrometry (MS) analysis. The application of MIPs in depletion of abundant proteins, in protein and proteotypic peptide capture as well as in capture of post-translational modifications (PTMs) is described and discussed. In addition, an overview of available MIP formats and their advantages and challenges is given, together with an overview of the mass spectrometric techniques used in protein analysis after MIP capture. Overall, the present literature demonstrates that for many applications MIPs for sample clean-up in mass spectrometric protein and proteomics analysis from biological matrices is still not fully matured. MIPs for proteotypic peptide capture is the most mature approach and a method for routine use may be available within the next few years.

Rational development of molecularly imprinted nanoparticles for blocking PD-1/PD-L1 axis

Blocking the PD-1/PD-L1 immune checkpoint has emerged as a promising strategy in cancer immunotherapy, in which monoclonal antibodies are predominately used as inhibitors. Despite their remarkable success, monoclonal antibody-based therapeutics suffer from drawbacks due to the use of antibodies, such as high cost, low stability and high frequency of immune-related adverse effects. Therefore, novel anti-PD-1/PD-L1 therapeutics that can address these issues are of significant importance. Herein, we report a molecularly imprinted polymer (MIP) based PD-1 nano inhibitor for blocking the PD-1/PD-L1 axis. The anti-PD-1 nanoMIP was rationally designed and engineered by epitope imprinting using the N-terminal epitope of PD-1 as the binding site. The anti-PD-1 nanoMIP showed good specificity and high affinity towards PD-1, yielding a disassociation constant at the 10-8 M level, much better than that between PD-1 and PD-L1. Via steric hindrance, this inhibitor could effectively block PD-1/PD-L1 interaction. Besides, it could effectively reactivate T cells and reverse the chemoresistance of tumor cells. Therefore, this present study not only provides a novel and promising immune checkpoint blockade inhibitor but also boosts further development of MIPs for cancer immunotherapy.

Development of molecularly imprinted polymer based phase boundaries for sensors design (review)

Achievements in polymer chemistry enables to design artificial phase boundaries modified by imprints of selected molecules and some larger structures. These structures seem very useful for the design of new materials suitable for affinity chromatography and sensors. In this review, we are overviewing the synthesis of molecularly imprinted polymers (MIPs) and the applicability of these MIPs in the design of affinity sensors. Such MIP-based layers or particles can be used as analyte-recognizing parts for sensors and in some cases they can replace very expensive compounds (e.g.: antibodies, receptors etc.), which are recognizing analyte. Many different polymers can be used for the formation of MIPs, but conducing polymers shows the most attractive capabilities for molecular-imprinting by various chemical compounds. Therefore, the application of conducting polymers (e.g.: polypyrrole, polyaniline, polythiophene, poly(3,4-ethylenedioxythiophene), and ortho-phenylenediamine) seems very promising. Polypyrrole is one of the most suitable for the development of MIP-based structures with molecular imprints by analytes of various molecular weights. Overoxiation of polypyrrole enables to increase the selectivity of polypyrrole-based MIPs. Methods used for the synthesis of conducting polymer based MIPs are overviewed. Some methods, which are applied for the transduction of analytical signal, are discussed, and challenges and new trends in MIP-technology are foreseen.

Rationally Screened and Designed ABCG2-Binding Aptamers for Targeting Cancer Stem Cells and Reversing Multidrug Resistance

The ATP-binding cassette, subfamily G, isoform 2 protein (ABCG2), as an important member of ABC transporters, plays a key role in multidrug resistance (MDR) in cancer and has been widely considered as a marker of cancer stem cells (CSC). Reagents capable of simultaneously targeting ABCG2 and reversing MDR have great clinical application values, but their development is highly challenging. Herein, ABCG2 glycosylated extracellular region-binding aptamers were efficiently screened by a cladded molecularly imprinted polymer (cMIP)-based in vitro screening method and further rationally engineered into cyclic bivalent aptamers. Experiments showed that both the monovalent and cyclic bivalent aptamers could specifically bind ABCG2 and thereby specially target CSC of human colorectal carcinomas (CoCSC), while the latter could effectively reverse MDR in drug-resistant liver cancer cells (HepG2/ADR). Different from currently predominant small molecule inhibitors, the reversal of MDR relied on a different mechanism; the cyclic bivalent aptamers bound the two monomers of ABCG2 dimers simultaneously and thereby blocked the ABCG2-mediated drug-pumping channel, resulting in increased intracellular accumulation of substrate drugs. This study opened a new access to the development of affinity reagents for targeting CSC and reversing MDR, holding great prospects in cancer diagnosis and treatment.

Boronate affinity-based template-immobilization surface imprinted quantum dots as fluorescent nanosensors for selective and sensitive detection of myricetin

In order to prepare a kind of efficient fluorescence sensors for determination of cis-diol-containing flavonoids, novel imprinted quantum dots for myricetin (Myr) were prepared based on boronate affinity-based template-immobilization surface imprinting. The obtained boronate affinity-based surface imprinted silica (imprinted APBA-functionalized CdTe QDs) was used as recognition elements. The quantum dots were used as signal-transduction materials. Under the optimum conditions, according to fluorescence quenching of imprinted APBA-functionalized CdTe QDs by Myr, the imprinting factor (IF) for Myr was evaluated to be 7.88. The result indicated that the boronate affinity functionalized quantum dots coated with imprinted silica were successfully prepared. The prepared imprinted APBA-functionalized CdTe QDs exhibited good sensitivity and selectivity for Myr. The fluorescence intensity was inversely proportional to the concentration of Myr in the 0.30-40 μM concentration range. And its detection limit was obtained to be 0.08 μM. Using the fluorescence sensors, the detection of Myr in real samples was successfully carried out, and the concentration of Myr in green tea and apple juice samples was evaluated to be 2.26 mg/g and 0.73 mg/g, respectively. The recoveries for the spiked green tea and apple juice samples were 95.2-105.0% and 91.5-111.0%, respectively. This study also provides an efficient fluorescent detection method for cis-diol-containing flavonoids in real samples.

Recent advances in protein-imprinted polymers: synthesis, applications and challenges

The molecular imprinting technique (MIT), also described as the "lock to key" method, has been demonstrated as an effective tool for the creation of synthetic polymers with antibody-like sites to specifically recognize target molecules. To date, most successful molecular imprinting researches were limited to small molecules (<1500 Da); biomacromolecule (especially protein) imprinting remains a serious challenge due to their large size, chemical and structural complexity, and environmental instability. Nevertheless, protein imprinting has achieved some significant breakthroughs in imprinting methods and applications over the past decade. Some special protein-imprinted materials with outstanding properties have been developed and exhibited excellent potential in several advanced fields such as separation and purification, proteomics, biomarker detection, bioimaging and therapy. In this review, we critically and comprehensively surveyed the recent advances in protein imprinting, particularly emphasizing the significant progress in imprinting methods and highlighted applications. Finally, we summarize the major challenges remaining in protein imprinting and propose its development direction in the near future.

Potentiometric Biosensors Based on Molecular-Imprinted Self-Assembled Monolayer Films for Rapid Detection of Influenza A Virus and SARS-CoV-2 Spike Protein

Rapid, yet accurate and sensitive testing has been shown to be critical in the control of spreading pandemic diseases such as COVID-19. Current methods which are highly sensitive and can differentiate different strains are slow and cannot be conveniently applied at the point of care. Rapid tests, meanwhile, require a high titer and are not sufficiently sensitive to discriminate between strains. Here, we report a rapid and facile potentiometric detection method based on nanoscale, three-dimensional molecular imprints of analytes on a self-assembled monolayer (SAM), which can deliver analyte-specific detection of both whole virions and isolated proteins in microliter amounts of bodily fluids within minutes. The detection substrate with nanoscale inverse surface patterns of analytes formed by a SAM identifies a target analyte by recognizing its surface nano- and molecular structures, which can be monitored by temporal measurement of the change in substrate open-circuit potential. The sensor unambiguously detected and differentiated H1N1 and H3N2 influenza A virions as well as the spike proteins of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and Middle-East respiratory syndrome (MERS) coronavirus in human saliva with limits of detection reaching 200 PFU/mL and 100 pg/mL for the viral particles and spike proteins, respectively. The demonstrated speed and specificity of detection, combined with a low required sample volume, high sensitivity, ease of potentiometric measurement, and simple sample collection and preparation, suggest that the technique can be used as a highly effective point-of-care diagnostic platform for a fast, accurate, and specific detection of various viral pathogens and their variants.

Molecularly imprinted polymers outperform lectin counterparts and enable more precise cancer diagnosis

Accurately analysing the particular glycosylation status of protein biomarkers is of significant importance in the precise, early diagnosis of cancer. Existing methods mainly rely on the use of antibodies and lectins. However, due to the macroscopic and microscopic heterogeneity of glycans, precise analysis of glycosylation status still remains a challenge. Molecularly imprinted polymers (MIPs), as a synthetic alternative to antibodies or lectins, may provide new solutions but have not yet been explored. Herein, we report an appealing strategy called triple MIP-based plasmonic immunosandwich assay (triMIP-PISA) for precise cancer diagnosis in terms of the relative glycosylation expression of glycoprotein biomarkers. As proof of the principle, alpha fetoprotein (AFP), which has been used as a clinical biomarker for early detection of hepatocellular carcinoma (HCC), as well as its Lens culinaris agglutinin (LCA)-reactive fraction (AFP-L3), which is mainly composed of core-fucosylated glycans, were used as two target proteoforms to test in this study. Using two MIPs that can specifically recognize the peptide sequence of AFP as well as a fucose-imprinted MIP that can specifically recognize the AFP-L3 fraction, facile simultaneous plasmon-enhanced Raman detection of AFP and AFP-L3 in serum was achieved, which allowed HCC patients to be distinguished from healthy individuals. Due to the excellent recognition properties of the MIPs that are comparable to those of antibodies and superior to those of lectins, our triMIP-PISA method exhibited improved precision as compared with an antibody plus lectin-based immunofluorescence assay. Thus, this strategy opened a new avenue towards the precise diagnosis of cancer.

Magnetic Molecularly Imprinted Polymers: An Update on Their Use in the Separation of Active Compounds from Natural Products

During the last few years, separation techniques using molecularly imprinted polymers (MIPs) have been developed, making breakthroughs using magnetic properties. Compared to conventional MIPs, magnetic molecularly imprinted polymers (MMIPs) have advantages in sample pretreatment due to their high specificity and selectivity towards analytes as a result of their larger specific surface areas and highly accessible specific binding sites. The techniques of isolation of active compounds from natural products usually require very long process times and low compound yields. When MMIPs are used in sample separation as Solid Phase Extraction (SPE) sorbents, the MMIPs are introduced into the dissolved sample and spread evenly, and they form bonds between the analyte and the MMIPs, which are then separated from the sample matrix using an external magnetic field. This process of separating analytes from the sample matrix makes the separation technique with MMIPs very simple and easy. This review discusses how to synthesize MMIPs, which factors must be considered in their synthesis, and their application in the separation of active compounds from natural products. MMIPs with magnetic core-shells made by co-precipitation can be a good choice for further development due to the high synthesis yield. Further optimization of the factors affecting the size and distribution of magnetic core-shell particles can obtain higher synthesis yields of MMIPs with higher adsorption capacity and selectivity. Thus, they can isolate target compounds from natural plants in high yields and purity.

Recent Advances of Point-of-Care Devices Integrated with Molecularly Imprinted Polymers-Based Biosensors: From Biomolecule Sensing Design to Intraoral Fluid Testing

Recent developments of point-of-care testing (POCT) and in vitro diagnostic medical devices have provided analytical capabilities and reliable diagnostic results for rapid access at or near the patient's location. Nevertheless, the challenges of reliable diagnosis still remain an important factor in actual clinical trials before on-site medical treatment and making clinical decisions. New classes of POCT devices depict precise diagnostic technologies that can detect biomarkers in biofluids such as sweat, tears, saliva or urine. The introduction of a novel molecularly imprinted polymer (MIP) system as an artificial bioreceptor for the POCT devices could be one of the emerging candidates to improve the analytical performance along with physicochemical stability when used in harsh environments. Here, we review the potential availability of MIP-based biorecognition systems as custom artificial receptors with high selectivity and chemical affinity for specific molecules. Further developments to the progress of advanced MIP technology for biomolecule recognition are introduced. Finally, to improve the POCT-based diagnostic system, we summarized the perspectives for high expandability to MIP-based periodontal diagnosis and the future directions of MIP-based biosensors as a wearable format.

Molecular imprinting and cladding produces antibody mimics with significantly improved affinity and specificity

Molecularly imprinted polymers (MIPs), as important mimics of antibodies, are chemically synthesized by polymerization in the presence of a target compound. MIPs have found wide applications in important fileds. However, the current molecular imprinting technology suffers from a dilemma; there is often a compromise between the best affinity and the best specificity for MIPs prepared under optimized conditions. Herein, we proposed a new strategy called molecular imprinting and cladding (MIC) to solve this issue. The principle is straightforward; after molecular imprinting, a chemically inert cladding thinlayer is generated to precisely cover non-imprinted area. We further proposed a special MIC approach for controllably engineering protein binders. The prepared cladded MIPs (cMIPs) exhibited significantly improved affinity and specificity. The general applicability of the proposed strategy and method was verified by engineering of cMIPs for the recognition of a variety of different proteins. The feasibility of cMIPs for real applications was demonstrated by fluorescence imaging of cancer cells against normal cells and immunoassay of C-peptide in human urine. This study opened up a new avenue for controllably engineering protein-specific antibody mimics with excellent recognition properties, holding great prospective in important applications such as disease diagnosis and nanomedicine.

Electrochemically Deposited Molecularly Imprinted Polymer-Based Sensors

This review is dedicated to the development of molecularly imprinted polymers (MIPs) and the application of MIPs in sensor design. MIP-based biological recognition parts can replace receptors or antibodies, which are rather expensive. Conducting polymers show unique properties that are applicable in sensor design. Therefore, MIP-based conducting polymers, including polypyrrole, polythiophene, poly(3,4-ethylenedioxythiophene), polyaniline and ortho-phenylenediamine are frequently applied in sensor design. Some other materials that can be molecularly imprinted are also overviewed in this review. Among many imprintable materials conducting polymer, polypyrrole is one of the most suitable for molecular imprinting of various targets ranging from small organics up to rather large proteins. Some attention in this review is dedicated to overview methods applied to design MIP-based sensing structures. Some attention is dedicated to the physicochemical methods applied for the transduction of analytical signals. Expected new trends and horizons in the application of MIP-based structures are also discussed.

Construction of DNA ligase-mimicking nanozymes via molecular imprinting

Enzyme mimics are of significant importance due to their facile preparation, low cost and stability to rigorous environment. Molecularly imprinted polymers (MIPs) have been important synthetic mimics of enzymes. However,...

Molecularly Imprinted and Cladded Nanoparticles Provide Better Phosphorylation Recognition

Phosphorylation is one of the most frequently occurring post-translation modifications in mammals. Because abnormal protein phosphorylation is related to many diseases, phosphorylation analysis is essential for a sound understanding of protein phosphorylation and its relationship with diseases. Among several types of reagents for phosphorylation recognition, molecularly imprinted polymers (MIPs), as synthetic mimics of antibodies, have exhibited unique strengths that can overcome the drawbacks of biological reagents. However, the performance of current MIPs has remained unideal. Meanwhile, while the currently existing imprinting methods have permitted the production of several material formats, such as crushed particles and mesoporous nanoparticles, a general method allowing for the preparation of monodispersed molecularly imprinted nanoparticles has not been developed yet. Herein, we report a new approach called reverse microemulsion template docking surface imprinting and cladding (RMTD-SIC) for facile preparation of monodispersed imprinted nanoparticles for better phosphorylation recognition. Through rational design and controllable engineering, monodisperse imprinted and cladded nanoparticles specific to general phosphorylation and tyrosine phosphorylation were synthesized, which yield the highest imprinting factors as compared with published studies. The prepared nanomaterials exhibited excellent specificity and affinity, allowing for specific enrichment and improved mass spectrometric identification of target phosphorylated peptides from complex samples containing 100-fold more abundant interfering peptides. Therefore, the RMTD-SIC approach holds great potential for phosphorylation analysis and phosphorylation recognition-based applications.

Controllable Engineering and Functionalizing of Nanoparticles for Targeting Specific Proteins towards Biomedical Applications

Nanoparticles have been widely used in important biomedical applications such as imaging, drug delivery, and disease therapy, in which targeting toward specific proteins is often essential. However, current targeting strategies mainly rely on surface modification with bioligands, which not only often fail to provide desired properties but also remain challenging. Here an unprecedented approach is reported, called reverse microemulsion-confined epitope-oriented surface imprinting and cladding (ROSIC), for facile, versatile, and controllable engineering coreless and core/shell nanoparticles with tunable monodispersed size as well as specific targeting capability toward proteins and peptides. Via engineering coreless imprinted and cladded silica nanoparticles, the effectiveness and superiority over conventional imprinting of the proposed approach are first verified. The prepared nanoparticles exhibit both high specificity and high affinity. Using quantum dots, superparamagnetic nanoparticles, silver nanoparticles, and upconverting nanoparticles as a representative set of core substrates, a variety of imprinted and cladded single-core/shell nanoparticles are then successfully prepared. Finally, using imprinted and cladded fluorescent nanoparticles as probes, in vitro targeted imaging of triple-negative breast cancer (TNBC) cells and in vivo targeted imaging of TNBC-bearing mice are achieved. This approach opens a new avenue to engineering of nanoparticles for targeting specific proteins, holding great prospects in biomedical applications.

Electroresponsive Hydrogels for Therapeutic Applications in the Brain

Electroresponsive hydrogels possess a conducting material component and respond to electric stimulation through reversible absorption and expulsion of water. The high level of hydration, soft elastomeric compliance, biocompatibility, and enhanced electrochemical properties render these hydrogels suitable for implantation in the brain to enhance the transmission of neural electric signals and ion transport. This review provides an overview of critical electroresponsive hydrogel properties for augmenting electric stimulation in the brain. A background on electric stimulation in the brain through electroresponsive hydrogels is provided. Common conducting materials and general techniques to integrate them into hydrogels are briefly discussed. This review focuses on and summarizes advances in electric stimulation of electroconductive hydrogels for therapeutic applications in the brain, such as for controlling delivery of drugs, directing neural stem cell differentiation and neurogenesis, improving neural biosensor capabilities, and enhancing neural electrode-tissue interfaces. The key challenges in each of these applications are discussed and recommendations for future research are also provided.

Epitope-imprinted polymers: Design principles of synthetic binding partners for natural biomacromolecules

Molecular imprinting (MI) has been explored as an increasingly viable tool for molecular recognition in various fields. However, imprinting of biologically relevant molecules like proteins is severely hampered by several problems. Inspired by natural antibodies, the use of epitopes as imprinting templates has been explored to circumvent those limitations, offering lower costs and greater versatility. Here, we review the latest innovations in this technology, as well as different applications where MI polymers (MIPs) have been used to target biomolecules of interest. We discuss the several steps in MI, from the choice of epitope and functional monomers to the different production methods and possible applications. We also critically explore how MIP performance can be assessed by various parameters. Last, we present perspectives on future breakthroughs and advances, offering insights into how MI techniques can be expanded to new fields such as tissue engineering.

Magnetic-molecularly imprinted polymers in electrochemical sensors and biosensors

Magnetic particles, as well as molecularly imprinted polymers, have revolutionized separation and bioanalytical methodologies in the 1980s due to their wide range of applications. Today, biologically modified magnetic particles are used in many scientific and technological applications and are integrated in more than 50,000 diagnostic instruments for the detection of a huge range of analytes. However, the main drawback of this material is their stability and high cost. In this work, we review recent advances in the synthesis and characterization of hybrid molecularly imprinted polymers with magnetic properties, as a cheaper and robust alternative for the well-known biologically modified magnetic particles. The main advantages of these materials are, besides the magnetic properties, the possibility to be stored at room temperature without any loss in the activity. Among all the applications, this work reviews the direct detection of electroactive analytes based on the preconcentration by using magnetic-MIP integrated on magneto-actuated electrodes, including food safety, environmental monitoring, and clinical and pharmaceutical analysis. The main features of these electrochemical sensors, including their analytical performance, are summarized. This simple and rapid method will open the way to incorporate this material in different magneto-actuated devices with no need for extensive sample pretreatment and sophisticated instruments.

Advances in epitope molecularly imprinted polymers for protein detection: a review

Epitope molecularly imprinted polymers (EMIPs) are novel imprinted materials using short characteristic peptides as templates rather than entire proteins. To be specific, the amino acid sequence of the template peptide is the same as an exposed N- or C-terminus of a target protein, or its amino acid composition and sequence replicate a similar conformational arrangement as the same amino acid residues on the surface of the target protein. EMIPs have a good application prospect in protein research. Herein, we focus on classification of epitope imprinting techniques, methods of epitope immobilization on matrix materials including boronate affinity immobilization, covalent bonding immobilization, physical adsorption immobilization and metal ion chelation immobilization, and application of EMIPs in peptides, proteins, target imaging and target therapy fields. Finally, the main problems and future development are summarized.

Advances in Molecularly Imprinted Polymers Based Affinity Sensors (Review)

Recent challenges in biomedical diagnostics show that the development of rapid affinity sensors is very important issue. Therefore, in this review we are aiming to outline the most important directions of affinity sensors where polymer-based semiconducting materials are applied. Progress in formation and development of such materials is overviewed and discussed. Some applicability aspects of conducting polymers in the design of affinity sensors are presented. The main attention is focused on bioanalytical application of conducting polymers such as polypyrrole, polyaniline, polythiophene and poly(3,4-ethylenedioxythiophene) ortho-phenylenediamine. In addition, some other polymers and inorganic materials that are suitable for molecular imprinting technology are also overviewed. Polymerization techniques, which are the most suitable for the development of composite structures suitable for affinity sensors are presented. Analytical signal transduction methods applied in affinity sensors based on polymer-based semiconducting materials are discussed. In this review the most attention is focused on the development and application of molecularly imprinted polymer-based structures, which can replace antibodies, receptors, and many others expensive affinity reagents. The applicability of electrochromic polymers in affinity sensor design is envisaged. Sufficient biocompatibility of some conducting polymers enables to apply them as "stealth coatings" in the future implantable affinity-sensors. Some new perspectives and trends in analytical application of polymer-based semiconducting materials are highlighted.

Molecular Imprinting Strategies for Tissue Engineering Applications: A Review

Tissue Engineering (TE) represents a promising solution to fabricate engineered constructs able to restore tissue damage after implantation. In the classic TE approach, biomaterials are used alongside growth factors to create a scaffolding structure that supports cells during the construct maturation. A current challenge in TE is the creation of engineered constructs able to mimic the complex microenvironment found in the natural tissue, so as to promote and guide cell migration, proliferation, and differentiation. In this context, the introduction inside the scaffold of molecularly imprinted polymers (MIPs)—synthetic receptors able to reversibly bind to biomolecules—holds great promise to enhance the scaffold-cell interaction. In this review, we analyze the main strategies that have been used for MIP design and fabrication with a particular focus on biomedical research. Furthermore, to highlight the potential of MIPs for scaffold-based TE, we present recent examples on how MIPs have been used in TE to introduce biophysical cues as well as for drug delivery and sequestering.

Molecularly Imprinted Polymer-Based Smart Prodrug Delivery System for Specific Targeting, Prolonged Retention, and Tumor Microenvironment-Triggered Release

Prodrug and drug delivery systems are two effective strategies for improving the selectivity of chemotherapeutics. Molecularly imprinted polymers (MIPs) have emerged as promising carriers in targeted drug delivery for cancer treatment, but they have not yet been integrated with the prodrug strategy. Reported here is an MIP-based smart prodrug delivery system for specific targeting, prolonged retention time, and tumor microenvironment-triggered release. 5'-Deoxy-5-fluorocytidine (DFCR) and sialic acid (SA) were used as a prodrug and a marker for tumor targeting, respectively. Their co-imprinted nanoparticles were prepared as a smart carrier. Prodrug-loaded MIP specifically and sustainably accumulated at the tumor site and then gradually released. Unlike conventional prodrug designs, which often require in-liver bioconversion, this MIP-based prodrug delivery is liver-independent but tumor-dependent. Thus, this study opens new access to the development of smart prodrug delivery nanoplatforms.