Oxygen-17 NMR in solids by dynamic-angle spinning and double rotation

Double-rotation (DOR) NMR spectroscopy: Progress and perspectives

Double-rotation (DOR) solid-state NMR spectroscopy is a high-resolution technique developed in the late 1980s. Although multiple-quantum magic-angle spinning (MQMAS) became the most widely used high-resolution method for half-integer spin quadrupoles after 1995, development and application of DOR NMR to a variety of chemical and materials science problems has endured. This Trend article recapitulates the development of DOR NMR, discusses various applications, and describes possible future directions. The main technical limitations specific to DOR NMR are simply related to the size of the double rotor system. The relatively large outer rotor (and thus coil) used for most applications over the past 35 years translates into relatively low rotor spinning frequencies, a low filling factor, and weak radiofrequency powers available for excitation and for proton decoupling. Ongoing developments in NMR instrumentation, including ever-shrinking MAS rotors and spherical NMR rotors, could solve many of these problems and may augur a renaissance for DOR NMR.

Quadrupolar Isotope-Correlation Spectroscopy in Solid-State NMR

Quadrupolar solid-state NMR carries a wealth of structural information, including insights about chemical environments arising through the determination of local coupling parameters. Current methods can successfully resolve these parameters for individual sites using sample-spinning methods techniques applicable to quadrupolar I ≥ 1 nuclei, provided second-order central transition broadenings do not exceed by much the spinning rate. For large quadrupolar coupling (C _Q) values, however, static acquisitions are often preferable, leading to challenges in extracting local structural information. This study explores the use of two-dimensional QUadrupolar Isotope Correlation SpectroscopY (QUICSY) experiments as a means to increase the NMR spectral resolution and enrich the characterization of quadrupolar NMR patterns under static conditions. QUICSY seeks to correlate the solid-state NMR powder line shapes for two quadrupolar isotopes belonging to the same element via a 2D experiment. In general, two isotopes of the same element will have different nuclear quadrupole moments, gyromagnetic ratios, and spin numbers but essentially identical chemical environments. The possibility then arises of obtaining sharp "ridges" in these 2D correlations, even in static samples showing large quadrupolar effects, which lead to second-order line shapes that are several kilohertz wide. Moreover, pairs of quadrupolar isotopes are recurrent in the periodic table and include important elements such as ^35,37Cl, ^69,71Ga, ^79,81Br, and ^85,87Rb. The potential of this approach is explored theoretically and experimentally on two rubidium-containing salts: RbClO₄ and Rb₂SO₄. We find that each compound gives rise to distinctive 2D QUICSY line shapes, depending on the quadrupolar and chemical shift anisotropy (CSA) parameters of its sites. These experimental line shapes show good agreement with analytically derived 2D spectra relying on literature values of the quadrupolar and CSA tensors of these compounds. The approach underlined here paves the way toward better characterization of wideline NMR spectra of quadrupolar nuclei possessing different nuclear isotopes.

17O NMR Spectroscopy: A Novel Probe for Characterizing Protein Structure and Folding

Oxygen is a key atom that maintains biomolecular structures, regulates various physiological processes, and mediates various biomolecular interactions. Oxygen-17 (¹⁷O), therefore, has been proposed as a useful probe that can provide detailed information about various physicochemical features of proteins. This is attributed to the facts that (1) ¹⁷O is an active isotope for nuclear magnetic resonance (NMR) spectroscopic approaches; (2) NMR spectroscopy is one of the most suitable tools for characterizing the structural and dynamical features of biomolecules under native-like conditions; and (3) oxygen atoms are frequently involved in essential hydrogen bonds for the structural and functional integrity of proteins or related biomolecules. Although ¹⁷O NMR spectroscopic investigations of biomolecules have been considerably hampered due to low natural abundance and the quadruple characteristics of the ¹⁷O nucleus, recent theoretical and technical developments have revolutionized this methodology to be optimally poised as a unique and widely applicable tool for determining protein structure and dynamics. In this review, we recapitulate recent developments in ¹⁷O NMR spectroscopy to characterize protein structure and folding. In addition, we discuss the highly promising advantages of this methodology over other techniques and explain why further technical and experimental advancements are highly desired.

Statistical learning of NMR tensors from 2D isotropic/anisotropic correlation nuclear magnetic resonance spectra

Many linear inversion problems involving Fredholm integrals of the first kind are frequently encountered in the field of magnetic resonance. One important application is the direct inversion of a solid-state nuclear magnetic resonance (NMR) spectrum containing multiple overlapping anisotropic subspectra to obtain a distribution of the tensor parameters. Because of the ill-conditioned nature of this inverse problem, we investigate the use of the truncated singular value decomposition and the smooth least absolute shrinkage and selection operator based regularization methods, which (a) stabilize the solution and (b) promote sparsity and smoothness in the solution. We also propose an unambiguous representation for the anisotropy parameters using a piecewise polar coordinate system to minimize rank deficiency in the inversion kernel. To obtain the optimum tensor parameter distribution, we implement the k-fold cross-validation, a statistical learning method, to determine the hyperparameters of the regularized inverse problem. In this article, we provide the details of the linear-inversion method along with numerous illustrative applications on purely anisotropic NMR spectra, both synthetic and experimental two-dimensional spectra correlating the isotropic and anisotropic frequencies.

17O NMR studies of organic and biological molecules in aqueous solution and in the solid state

This review describes the latest developments in the field of ¹⁷O NMR spectroscopy of organic and biological molecules both in aqueous solution and in the solid state. In the first part of the review, a general theoretical description of the nuclear quadrupole relaxation process in isotropic liquids is presented at a mathematical level suitable for non-specialists. In addition to the first-order quadrupole interaction, the theory also includes additional relaxation mechanisms such as the second-order quadrupole interaction and its cross correlation with shielding anisotropy. This complete theoretical treatment allows one to assess the transverse relaxation rate (thus the line width) of NMR signals from half-integer quadrupolar nuclei in solution over the entire range of motion. On the basis of this theoretical framework, we discuss general features of quadrupole-central-transition (QCT) NMR, which is a particularly powerful method of studying biomolecules in the slow motion regime. Then we review recent advances in ¹⁷O QCT NMR studies of biological macromolecules in aqueous solution. The second part of the review is concerned with solid-state ¹⁷O NMR studies of organic and biological molecules. As a sequel to the previous review on the same subject [G. Wu, Prog. Nucl. Magn. Reson. Spectrosc. 52 (2008) 118-169], the current review provides a complete coverage of the literature published since 2008 in this area.

SCFit: Software for single-crystal NMR analysis. Free vs constrained fitting

The design and implementation of a software package for the analysis of single-crystal NMR data is presented. The SCFit software can treat spectra arising from various interactions: (i) chemical shift tensor only; (ii) chemical shift tensor and quadrupolar coupling tensor; (iii) dipolar and indirect nuclear spin-spin coupling tensors; (iv) all four interactions. The software is demonstrated on recently reported ¹⁷O and ³¹P single-crystal NMR data for triphenylphosphine oxide and for two of its halogen-bonded cocrystals. The ¹⁷O single-crystal NMR data represent a case where all four above-mentioned interactions simultaneously affect the spectra. SCFit can fit the chemical shift and quadrupolar coupling in two ways: (i) through an unconstrained fitting process where all tensor parameters are freely optimized or (ii) through a constrained fitting process where the principal components of the tensors may be fixed to values known previously with high precision via the analysis of powder samples. The second strategy is explored in an effort to reduce the number of unknowns in the fitting process; an improvement in the precision of the resulting tensor orientations is noted in some cases.

Perspectives on high-field and solid-state NMR methods of quadrupole nuclei

High magnetic field can dramatically increase the spectral resolution and sensitivity of quadrupole nuclei S > 1/2 by the reduction of the second-order quadrupole broadening. A brief overview and outlook on spectral acquisition, the importance of high magnetic field, inter-nuclei distance measurement, various 2D separation and correlation methods of quadrupole nuclei are presented. The complications and consequences of spin dynamics under rf irradiation for the (2S + 1) level system and level-crossing with the satellite transition frequencies under magic-angle spinning are discussed. There is a scaling down of (S + 1/2) to the efficiency of many experiments in comparison with a spin-1/2 due to the fact that only two central transition spin states out of the (2S + 1) levels contribute to polarization transfer and spin correlation.

Alumina: discriminative analysis using 3D correlation of solid-state NMR parameters

Synthetic transition aluminas (χ, κ, θ, γ, δ, η, ρ) exhibit unique adsorptive and catalytic properties leading to numerous practical applications. Generated by thermal transformation of aluminium (oxy)hydroxides, structural differences between them arise from the variability of aluminium coordination numbers and degree of dehydroxylation. Unequivocal identification of these phases using X-ray diffraction has proven to be very difficult. Quadrupolar interactions of 27Al nuclei, highly sensitive to each site symmetry, render advanced 27Al solid-state NMR a unique spectroscopic tool to fingerprint and identify the different phases. In this paper, 27Al NMR spectroscopic data on alumina reported in literature are collected in a comprehensive library. Based on this dataset, a new 3D correlative method of NMR parameters is presented, enabling fingerprinting and identification of such phases. Providing a gold standard from crystalline samples, this approach demonstrates that any sort of crystalline, ill crystallized or amorphous, mixed periodic or aperiodically ordered transition alumina can now be assessed beyond the current limitations of characterisation. Adopting the presented approach as a standard characterisation of alumina samples will readily reveal NMR parameter-structure-property relations suitable to develop new or improved applications of alumina. Methodological guidance is provided to assist consistent implementation of this characterisation throughout the fields involved.

Recent advances in solid-state nuclear magnetic resonance spectroscopy of exotic nuclei

We present a review of recent advances in solid-state nuclear magnetic resonance (SSNMR) studies of exotic nuclei. Exotic nuclei may be spin-1/2 or quadrupolar, and typically have low gyromagnetic ratios, low natural abundances, large quadrupole moments (when I > 1/2), or some combination of these properties, generally resulting in low receptivities and/or prohibitively broad line widths. Some nuclides are little studied for other reasons, also rendering them somewhat exotic. We first discuss some of the recent progress in pulse sequences and hardware development which continues to enable researchers to study new kinds of materials as well as previously unfeasible nuclei. This is followed by a survey of applications to a wide range of exotic nuclei (including e.g., ⁹Be, ²⁵Mg, ³³S, ³⁹K, ⁴³Ca, ^47/49Ti, ⁵³Cr, ⁵⁹Co, ⁶¹Ni, ⁶⁷Zn, ⁷³Ge, ⁷⁵As, ⁸⁷Sr, ¹¹⁵In, ¹¹⁹Sn, ^121/123Sb, ^135/137Ba, ^185/187Re, ²⁰⁹Bi), most of them quadrupolar. The scope of the review is the past ten years, i.e., 2007-2017.

Advances in instrumentation and methodology for solid-state NMR of biological assemblies

Many advances in instrumentation and methodology have furthered the use of solid-state NMR as a technique for determining the structures and studying the dynamics of molecules involved in complex biological assemblies. Solid-state NMR does not require large crystals, has no inherent size limit, and with appropriate isotopic labeling schemes, supports solving one component of a complex assembly at a time. It is complementary to cryo-EM, in that it provides local, atomic-level detail that can be modeled into larger-scale structures. This review focuses on the development of high-field MAS instrumentation and methodology; including probe design, benchmarking strategies, labeling schemes, and experiments that enable the use of quadrupolar nuclei in biomolecular NMR. Current challenges facing solid-state NMR of biological assemblies and new directions in this dynamic research area are also discussed.

Magic angle spinning spheres

Magic angle spinning (MAS) is commonly used in nuclear magnetic resonance of solids to improve spectral resolution. Rather than using cylindrical rotors for MAS, we demonstrate that spherical rotors can be spun stably at the magic angle. Spherical rotors conserve valuable space in the probe head and simplify sample exchange and microwave coupling for dynamic nuclear polarization. In this current implementation of spherical rotors, a single gas stream provides bearing gas to reduce friction, drive propulsion to generate and maintain angular momentum, and variable temperature control for thermostating. Grooves are machined directly into zirconia spheres, thereby converting the rotor body into a robust turbine with high torque. We demonstrate that 9.5-mm-outside diameter spherical rotors can be spun at frequencies up to 4.6 kHz with N₂(g) and 10.6 kHz with He(g). Angular stability of the spinning axis is demonstrated by observation of ⁷⁹Br rotational echoes out to 10 ms from KBr packed within spherical rotors. Spinning frequency stability of ±1 Hz is achieved with resistive heating feedback control. A sample size of 36 μl can be accommodated in 9.5-mm-diameter spheres with a cylindrical hole machined along the spinning axis. We further show that spheres can be more extensively hollowed out to accommodate 161 μl of the sample, which provides superior signal-to-noise ratio compared to traditional 3.2-mm-diameter cylindrical rotors.

Molecular and electron-spin structures of a ring-shaped mixed-valence polyoxovanadate (IV, V) studied by (11)B and (23)Na solid-state NMR spectroscopy and DFT calculations

(11)B and (23)Na solid-state nuclear magnetic resonance (NMR) spectra of ring-shaped paramagnetic crystals of H15[V7(IV)V5(V)B32O84Na4]·13H2O containing seven d(1) electrons from V(IV) were studied. Magic-angle-spinning (MAS) and multiple-quantum MAS NMR experiments were performed at moderate (9.4T) and ultrahigh magnetic fields (21.6T). The NMR parameters for quadrupole and isotropic chemical shift interactions were estimated by simulation of the NMR spectra and from relativistic density functional theory (DFT) calculations. Four Na ions incorporated into the framework were found to occupy four distinct sites with different populations. The DFT calculation showed that d(1) electrons with effectively one up-spin caused by strong antiferromagnetic interactions were delocalized over the 12V ions.

Quantitative structure parameters from the NMR spectroscopy of quadrupolar nuclei

Nuclear magnetic resonance (NMR) spectroscopy is one of the most important characterization tools in chemistry, however, 3/4 of the NMR active nuclei are underutilized due to their quadrupolar nature. This short review centers on the development of methods that use solid-state NMR of quadrupolar nuclei for obtaining quantitative structural information. Namely, techniques using dipolar recoupling as well as the resolution afforded by double-rotation are presented for the measurement of spin–spin coupling between quadrupoles, enabling the measurement of internuclear distances and connectivities. Two-dimensional J-resolved-type experiments are then presented for the measurement of dipolar and J coupling, between spin-1/2 and quadrupolar nuclei as well as in pairs of quadrupolar nuclei. Select examples utilizing these techniques for the extraction of structural information are given. Techniques are then described that enable the fine refinement of crystalline structures using solely the electric field gradient tensor, measured using NMR, as a constraint. These approaches enable the solution of crystal structures, from polycrystalline compounds, that are of comparable quality to those solved using single-crystal diffraction.

Ab Initio Quality NMR Parameters in Solid-State Materials Using a High-Dimensional Neural-Network Representation

Nuclear magnetic resonance (NMR) spectroscopy is one of the most powerful experimental tools to probe the local atomic order of a wide range of solid-state compounds. However, due to the complexity of the related spectra, in particular for amorphous materials, their interpretation in terms of structural information is often challenging. These difficulties can be overcome by combining molecular dynamics simulations to generate realistic structural models with an ab initio evaluation of the corresponding chemical shift and quadrupolar coupling tensors. However, due to computational constraints, this approach is limited to relatively small system sizes which, for amorphous materials, prevents an adequate statistical sampling of the distribution of the local environments that is required to quantitatively describe the system. In this work, we present an approach to efficiently and accurately predict the NMR parameters of very large systems. This is achieved by using a high-dimensional neural-network representation of NMR parameters that are calculated using an ab initio formalism. To illustrate the potential of this approach, we applied this neural-network NMR (NN-NMR) method on the (17)O and (29)Si quadrupolar coupling and chemical shift parameters of various crystalline silica polymorphs and silica glasses. This approach is, in principal, general and has the potential to be applied to predict the NMR properties of various materials.

Spatial reorientation experiments for NMR of solids and partially oriented liquids

Motional reorientation experiments are extensions of Magic Angle Spinning (MAS) where the rotor axis is changed in order to average out, reintroduce, or scale anisotropic interactions (e.g. dipolar couplings, quadrupolar interactions or chemical shift anisotropies). This review focuses on Variable Angle Spinning (VAS), Switched Angle Spinning (SAS), and Dynamic Angle Spinning (DAS), all of which involve spinning at two or more different angles sequentially, either in successive experiments or during a multidimensional experiment. In all of these experiments, anisotropic terms in the Hamiltonian are scaled by changing the orientation of the spinning sample relative to the static magnetic field. These experiments vary in experimental complexity and instrumentation requirements. In VAS, many one-dimensional spectra are collected as a function of spinning angle. In SAS, dipolar couplings and/or chemical shift anisotropies are reintroduced by switching the sample between two different angles, often 0° or 90° and the magic angle, yielding a two-dimensional isotropic-anisotropic correlation spectrum. Dynamic Angle Spinning (DAS) is a related experiment that is used to simultaneously average out the first- and second-order quadrupolar interactions, which cannot be accomplished by spinning at any unique rotor angle in physical space. Although motional reorientation experiments generally require specialized instrumentation and data analysis schemes, some are accessible with only minor modification of standard MAS probes. In this review, the mechanics of each type of experiment are described, with representative examples. Current and historical probe and coil designs are discussed from the standpoint of how each one accomplishes the particular objectives of the experiment(s) it was designed to perform. Finally, applications to inorganic materials and liquid crystals, which present very different experimental challenges, are discussed. The review concludes with perspectives on how motional reorientation experiments can be applied to current problems in chemistry, molecular biology, and materials science, given the many advances in high-field NMR magnets, fast spinning, and sample preparation realized in recent years.

Adding a lens Improves spinning speed characterization

Highly stable sample rotation is important in many solid-state NMR experiments. Whether the necessary stability is achieved is not always clear. Typically only an average frequency over some time interval (often relatively long and unknown) is available from the spinning speed controller readout, which is not representative of the short-term variations of instantaneous rotation frequency. The necessity of the relatively slow measurement of spinning speed is a consequence of phase noise in the tachometer, which prevents speed measurement to be both rapid and precise at the same time. We show that adding a lens to the tachometer, without any other changes in the probe, reduces phase noise by nearly an order of magnitude and allows improved measurement of the spinning speed.

(14)N overtone transition in double rotation solid-state NMR

Solid-state NMR transitions involving outer energy levels of the spin-1 (14)N nucleus are immune, to first order in perturbation theory, to the broadening caused by the nuclear quadrupole interaction. The corresponding overtone spectra, when acquired in conjunction with magic-angle sample spinning, result in lines, which are just a few kHz wide, permitting the direct detection of nitrogen compounds without the need for labeling. Despite the success of this technique, "overtone" resonances are still broadened due to indirect, second order effects arising from the large quadrupolar interaction. Here we demonstrate that another order of magnitude in spectral resolution may be gained by using double rotation. This brings the width of the (14)N solid-state NMR lines much closer to the region commonly associated with high-resolution solid-state NMR spectroscopy of (15)N and demonstrates the improvements in resolution that may be possible through the development of pulsed methodologies to suppress these second order effects.

Structural Insights into Bound Water in Crystalline Amino Acids: Experimental and Theoretical (17)O NMR

We demonstrate here that the (17)O NMR properties of bound water in a series of amino acids and dipeptides can be determined with a combination of nonspinning and magic-angle spinning experiments using a range of magnetic field strengths from 9.4 to 21.1 T. Furthermore, we propose a (17)O chemical shift fingerprint region for bound water molecules in biological solids that is well outside the previously determined ranges for carbonyl, carboxylic, and hydroxyl oxygens, thereby offering the ability to resolve multiple (17)O environments using rapid one-dimensional NMR techniques. Finally, we compare our experimental data against quantum chemical calculations using GIPAW and hybrid-DFT, finding intriguing discrepancies between the electric field gradients calculated from structures determined by X-ray and neutron diffraction.

On the crystal structure of the vaterite polymorph of CaCO3: a calcium-43 solid-state NMR and computational assessment

The vaterite polymorph of CaCO3 has puzzled crystallographers for decades in part due to difficulties in obtaining single crystals. The multiple proposed structures for the vaterite polymorph of CaCO3 are assessed using a combined (43)Ca solid-state nuclear magnetic resonance (SSNMR) spectroscopic and computational approach. A combination of improved experimental and computational methods, along with a calibrated chemical shift scale and (43)Ca nuclear quadrupole moment, allow for improved insights relative to our earlier work (Bryce et al., J. Am. Chem. Soc. 2008, 130, 9282). Here, we synthesize a (43)Ca isotopically-enriched sample of vaterite and perform high-resolution quadrupolar SSNMR experiments including magic-angle spinning (MAS), double-rotation (DOR), and multiple-quantum (MQ) MAS experiments at magnetic field strengths of 9.4 and 21.1T. We identify one crystallographically unique Ca(2+) site in vaterite with a slight distribution in both chemical shifts and quadrupolar parameters. Both the experimental (43)Ca electric field gradient tensor and the isotropic chemical shift for vaterite are compared to those calculated with the gauge-including projector-augmented-wave (GIPAW) DFT method in an attempt to identify the model that best represents the crystal structure of vaterite. Simulations of (43)Ca DOR and MAS NMR spectra based on the NMR parameters computed for a total of 18 structural models for vaterite allow us to distinguish between these models. Among these 18, the P3221 and C2 structures provide simulated spectra and diffractograms in best agreement with all experimental data.

A 3D experiment that provides isotropic homonuclear correlations of half-integer quadrupolar nuclei

Two 3D experiments, capable of producing enhanced resolution two-spin double-quantum (DQ) homonuclear correlations for half-integer quadrupolar nuclei, are described. The first uses a split-t1 MQMAS sequence followed by a sandwiched oR(3) symmetry-based dipolar recoupling sequence to directly excite DQ coherences. In this case an isotropic single-quantum (SQ) coherence starts the homonuclear DQ excitation. In the second experiment a single strong pulse is used to create triple quantum (TQ) coherence followed by a further single pulse conversion to zero-order before a non-sandwiched oR(3) DQ sequence. The first experiment is demonstrated using (87)Rb in RbNO3, with three Rb sites in a ∼5ppm range, and the second to (11)B in caesium triborate, CsB3O5, with two three-coordinated sites separated by ∼2ppm and one four-coordinated boron site. In both cases, all sites are clearly resolved and their connections observed. The second experiment has higher sensitivity and a good signal to noise is obtained in a reasonable time despite the long T1 relaxation time of (11)B in this material.

Dynamic nuclear polarization of 17O: direct polarization

Dynamic nuclear polarization of (17)O was studied using four different polarizing agents: the biradical TOTAPOL and the monoradicals trityl and SA-BDPA, as well as a mixture of the latter two. Field profiles, DNP mechanisms, and enhancements were measured to better understand and optimize directly polarizing this low-gamma quadrupolar nucleus using both mono- and biradical polarizing agents. Enhancements were recorded at <88 K and were >100 using the trityl (OX063) radical and <10 with the other polarizing agents. The >10,000-fold savings in acquisition time enabled a series of biologically relevant small molecules to be studied with small sample sizes and the measurement of various quadrupolar parameters. The results are discussed with comparison to room temperature studies and GIPAW quantum chemical calculations. These experimental results illustrate the strength of high field DNP and the importance of radical selection for studying low-gamma nuclei.

Solid-State NMR Spectroscopy of Metal–Organic Framework Compounds (MOFs)

Nuclear Magnetic Resonance (NMR) spectroscopy is a well-established method for the investigation of various types of porous materials. During the past decade, metal–organic frameworks have attracted increasing research interest. Solid-state NMR spectroscopy has rapidly evolved into an important tool for the study of the structure, dynamics and flexibility of these materials, as well as for the characterization of host–guest interactions with adsorbed species such as xenon, carbon dioxide, water, and many others. The present review introduces and highlights recent developments in this rapidly growing field.

Dynamic Nuclear Polarization of Oxygen-17

Oxygen-17 detected DNP NMR of a water/glycerol glass enabled an 80-fold enhancement of signal intensities at 82 K, using the biradical TOTAPOL. The >6,000-fold savings in acquisition time enables (17)O-(1)H distance measurements and heteronuclear correlation experiments. These experiments are the initial demonstration of the feasibility of DNP NMR on quadrupolar (17)O.

23Na double-rotation NMR of sodium nucleotides leads to the discovery of a new dCMP hendecahydrate

Obtaining definitive information concerning the coordination environment of sodium ions which balance the negative charges found in nucleotides is a challenging task. We show that high resolution 1D and 2D (23)Na NMR spectra of sodium nucleotides obtained in the solid state with the use of double-rotation (DOR) provide valuable structural information. Sensitive spin diffusion homonuclear correlation experiments are used to establish the relative proximities of various pairs of crystallographically distinct Na sites and to assign the spectral resonances. Additionally, the DOR sidebands are simulated to obtain coordination information which is complementary to that obtained using multiple-quantum magic-angle spinning NMR spectra. These experiments led us to discover a new hendecahydrate of deoxycytidine monophosphate (dCMP), the structure of which is confirmed via single-crystal X-ray diffraction. This hydrate crystallizes reproducibly when deuterated water is used exclusively in the preparation process.

Residual dipolar coupling between quadrupolar nuclei under magic-angle spinning and double-rotation conditions

Residual dipolar couplings between spin-1/2 and quadrupolar nuclei are often observed and exploited in the magic-angle spinning (MAS) NMR spectra of spin-1/2 nuclei. These orientation-dependent splittings contain information on the dipolar interaction, which can be translated into structural information. The same type of splittings may also be observed for pairs of quadrupolar nuclei, although information is often difficult to extract from the quadrupolar-broadened lineshapes. Here, the complete theory for describing the dipolar coupling between two quadrupolar nuclei in the frequency domain by Hamiltonian diagonalization is given. The theory is developed under MAS and double-rotation (DOR) conditions, and is valid for any spin quantum numbers, quadrupolar coupling constants, asymmetry parameters, and tensor orientations at both nuclei. All terms in the dipolar Hamiltonian become partially secular and contribute to the NMR spectrum. The theory is validated using experimental 11B and 35/37Cl NMR experiments carried out on powdered B-chlorocatecholborane, where both MAS and DOR are used to help separate effects of the quadrupolar interaction from those of the dipolar interaction. It is shown that the lineshapes are sensitive to the quadrupolar coupling constant of both nuclei and to the J coupling (including its sign). From these experiments, the dipolar coupling constant for a heteronuclear spin pair of quadrupolar nuclei may be obtained as well as the sign of the quadrupolar coupling constant of the perturbing nucleus; these are two parameters that are difficult to obtain experimentally otherwise.

Obtaining accurate chemical shifts for all magnetic nuclei (1H, 13C, 17O, and 27Al) in tris(2,4-pentanedionato-O,O′)aluminium(III) — A solid-state NMR case study

We report a complete set of high-resolution solid-state NMR spectra for all magnetic nuclei (1H, 13C, 17O, and 27Al) in the α-form of tris(2,4-pentanedionato-O,O′)aluminium(III), α-Al(acac)3. These high-resolution NMR spectra were obtained by using a host of solid-state NMR techniques: standard cross-polarization under the magic-angle spinning (CPMAS) method for 13C, 1-D homonuclear decoupling using the windowed DUMBO sequence for 1H, double-rotation (DOR) for 17O and 27Al, and multiple-quantum MAS for 27Al. Some experiments were performed at multiple magnetic fields. We show that the isotropic chemical shifts obtained for 1H, 13C, 17O, and 27Al nuclei in α-Al(acac)3 are highly resolved and accurate, regardless of the nature of the targeted nuclear spins (i.e., spin-1/2 or quadrupolar) and, as such, can be treated equally in comparison with computational chemical shifts obtained from a gauge-including projector-augmented wave (GIPAW) plane-wave pseudopotential DFT method.

Removal of sidebands in double-rotation NMR in real time

Double-rotation (DOR) is the only technique generally capable of yielding high-resolution NMR spectra of half-integer quadrupolar nuclei in one dimension for solids without the need for sophisticated coherence pathway selection. Unfortunately, due to the low outer rotor spinning frequencies currently available, the spectra often contain a large number of spinning sidebands which may overlap with the resonances of interest. We implement a simple, robust, and easy to use family of pulse sequences, which in practice are fully analogous to the 'total suppression of sidebands' (TOSS) sequences, to suppress all sidebands arising from the spinning of the outer rotor in DOR experiments. By removing the rotor phase dependence of the evolution of the sidebands, the sidebands destructively interfere with one another during the course of signal averaging to yield 'solution-like' spectra of half-integer quadrupolar nuclei in solids. Advantages and shortcomings of the method compared to other DOR sideband suppression methods are explored with the aid of simulations.

Probing quadrupolar nuclei by solid-state NMR spectroscopy: recent advances

Solid-state nuclear magnetic resonance (NMR) of quadrupolar nuclei has recently undergone remarkable development of capabilities for obtaining structural and dynamic information at the molecular level. This review summarizes the key achievements attained during the last couple of decades in solid-state NMR of both integer spin and half-integer spin quadrupolar nuclei. We provide a concise description of the first- and second-order quadrupolar interactions, and their effect on the static and magic angle spinning (MAS) spectra. Methods are explained for efficient excitation of single- and multiple-quantum coherences, and acquisition of spectra under low- and high-resolution conditions. Most of all, we present a coherent, comparative description of the high-resolution methods for half-integer quadrupolar nuclei, including double rotation (DOR), dynamic angle spinning (DAS), multiple-quantum magic angle spinning (MQMAS), and satellite transition magic angle spinning (STMAS). Also highlighted are methods for processing and analysis of the spectra. Finally, we review methods for probing the heteronuclear and homonuclear correlations between the quadrupolar nuclei and their quadrupolar or spin-1/2 neighbors.

Separation of isotropic chemical and second-order quadrupolar shifts by multiple-quantum double rotation NMR

Using a two-dimensional multiple-quantum (MQ) double rotation (DOR) experiment the contributions of the chemical shift and quadrupolar interaction to isotropic resonance shifts can be completely separated. Spectra were acquired using a three-pulse triple-quantum z-filtered pulse sequence and subsequently sheared along both the nu(1) and nu(2) dimensions. The application of this method is demonstrated for both crystalline (RbNO(3)) and amorphous samples (vitreous B(2)O(3)). The existence of the two rubidium isotopes ((85)Rb and (87)Rb) allows comparison of results for two nuclei with different spins (I=3/2 and 5/2), as well as different dipole and quadrupole moments in a single chemical compound. Being only limited by homogeneous line broadening and sample crystallinity, linewidths of approximately 0.1 and 0.2 ppm can be measured for (87)Rb in the quadrupolar and chemical shift dimensions, enabling highly accurate determination of the isotropic chemical shift and the quadrupolar product, P(Q). For vitreous B(2)O(3), the use of MQDOR allows the chemical shift and electric field gradient distributions to be directly determined-information that is difficult to obtain otherwise due to the presence of second-order quadrupolar broadening.

Symmetry-based recoupling in double-rotation NMR spectroscopy

In this contribution, we extend the theory of symmetry-based pulse sequences of types CN(n) (nu) and RN(n) (nu) in magic-angle-spinning nuclear resonance spectroscopy [M. H. Levitt, in Encyclopedia of Nuclear Magnetic Resonance, edited by D. M. Grant and R. K. Harris (Wiley, Chichester, 2002), Vol. 9]. to the case of rotating the sample simultaneously around two different angles with respect to the external magnetic field (double-rotation). We consider the case of spin-1/2 nuclei in general and the case of half-integer quadrupolar nuclei that are subjected to weak radio frequency pulses operating selectively on the central-transition polarizations. The transformation properties of the homonuclear dipolar interactions and J-couplings under central-transition-selective spin rotations are presented. We show that the pulse sequence R2(2) (1)R2(2) (-1) originally developed for homonuclear dipolar recoupling of half-integer quadrupolar nuclei under magic-angle-spinning conditions [M. Eden, D. Zhou, and J. Yu, Chem. Phys. Lett. 431, 397 (2006)] may be used for the same purpose in the case of double rotation, if the radio frequency pulses are synchronized with the outer rotation of the sample. We apply this sequence, sandwiched by central-transition selective 90 degrees pulses, to excite double-quantum coherences in homonuclear spin systems consisting of (23)Na and (27)Al nuclei.

Multidimensional solid state NMR of anisotropic interactions in peptides and proteins

Accurate determinations of chemical shift anisotropy (CSA) tensors are valuable for NMR of biological systems. In this review we describe recent developments in CSA measurement techniques and applications, particularly in the context of peptides and proteins. These techniques include goniometeric measurements of single crystals, slow magic-angle spinning studies of powder samples, and CSA recoupling under moderate to fast MAS. Experimental CSA data can be analyzed by comparison with ab initio calculations for structure determination and refinement. This approach has particularly high potential for aliphatic (13)C analysis, especially Calpha tensors which are directly related to structure. Carbonyl and (15)N CSA tensors demonstrate a more complex dependence upon hydrogen bonding and electrostatics, in addition to conformational dependence. The improved understanding of these tensors and the ability to measure them quantitatively provide additional opportunities for structure determination, as well as insights into dynamics.

A Hall effect angle detector for solid-state NMR

We describe a new method for independent monitoring of the angle between the spinning axis and the magnetic field in solid-state NMR. A Hall effect magnetic flux sensor is fixed to the spinning housing, so that a change in the stator orientation leads to a change in the angle between the Hall plane and the static magnetic field. This leads to a change in the Hall voltage generated by the sensor when an electric current is passed through it. The Hall voltage may be measured externally by a precision voltmeter, allowing the spinning angle to be measured non-mechanically and independent of the NMR experiment. If the Hall sensor is mounted so that the magnetic field is approximately parallel to the Hall plane, the Hall voltage becomes highly sensitive to the stator orientation. The current angular accuracy is around 10 millidegrees. The precautions needed to achieve higher angular accuracy are described.

Determination of NMR interaction parameters from double rotation NMR

It is shown that the anisotropic NMR parameters for half-integer quadrupolar nuclei can be determined using double rotation (DOR) NMR at a single magnetic field with comparable accuracy to multi-field static and MAS experiments. The (17)O nuclei in isotopically enriched l-alanine and OPPh(3) are used as illustrations. The anisotropic NMR parameters are obtained from spectral simulation of the DOR spinning sideband intensities using a computer program written with the GAMMA spin-simulation libraries. Contributions due to the quadrupolar interaction, chemical shift anisotropy, dipolar coupling and J coupling are included in the simulations. In l-alanine the oxygen chemical shift span is 455 +/- 20 ppm and 350 +/- 20 ppm for the O1 and O2 sites, respectively, and the Euler angles are determined to an accuracy of +/- 5-10 degrees . For cases where effects due to heteronuclear J and dipolar coupling are observed, it is possible to determine the angle between the internuclear vector and the principal axis of the electric field gradient (EFG). Thus, the orientation of the major components of both the EFG and chemical shift tensors (i.e., V(33) and delta(33)) in the molecular frame may be obtained from the relative intensity of the split DOR peaks. For OPPh(3) the principal axis of the (17)O EFG is found to be close to the O-P bond, and the (17)O-(31)P one-bond J coupling ((1)J(OP)=161 +/- 2 Hz) is determined to a much higher accuracy than previously.