Conditional control of suicide gene expression in tumor cells with theophylline-responsive ribozyme

Cell-Free Biosensing Genetic Circuit Coupled with Ribozyme Cleavage Reaction for Rapid and Sensitive Detection of Small Molecules

Synthetic biological systems have been utilized to develop a wide range of genetic circuits and components that enhance the performance of biosensing systems. Among them, cell-free systems are emerging as important platforms for synthetic biology applications. Genetic circuits play an essential role in cell-free systems, mainly consisting of sensing modules, regulation modules, and signal output modules. Currently, fluorescent proteins and aptamers are commonly used as signal outputs. However, these signal output modes cannot simultaneously achieve faster signal output, more accurate and reliable performance, and signal amplification. Ribozyme is a highly structured and catalytic RNA molecule that can specifically recognize and cut specific substrate sequences. Here, by adopting ribozyme as the signal output, we developed a cell-free biosensing genetic circuit coupled with the ribozyme cleavage reaction, enabling rapid and sensitive detection of small molecules. More importantly, we have also successfully constructed a 3D-printed sensor array and thereby achieved high-throughput analysis of an inhibitory drug. Furthermore, our method will help expand the application range of ribozyme in the field of synthetic biology and also optimize the signal output system of cell-free biosensing, thus promoting the development of cell-free synthetic biology in biomedical research, clinical diagnosis, environmental monitoring, and food inspection.

A Synthetic Riboswitch to Regulate Haloarchaeal Gene Expression

In recent years, synthetic riboswitches have become increasingly important to construct genetic circuits in all three domains of life. In bacteria, synthetic translational riboswitches are often employed that modulate gene expression by masking the Shine-Dalgarno (SD) sequence in the absence or presence of a cognate ligand. For (halo-)archaeal translation, a SD sequence is not strictly required. The application of synthetic riboswitches in haloarchaea is therefore limited so far, also because of the molar intracellular salt concentrations found in these microbes. In this study, we applied synthetic theophylline-dependent translational riboswitches in the archaeon Haloferax volcanii. The riboswitch variants A through E and E^∗ were chosen since they not only mask the SD sequence but also the AUG start codon by forming a secondary structure in the absence of the ligand theophylline. Upon addition of the ligand, the ribosomal binding site and start codon become accessible for translation initiation. Riboswitch E mediated a dose-dependent, up to threefold activation of the bgaH reporter gene expression. Raising the salt concentration of the culture media from 3 to 4 M NaCl resulted in a 12-fold increase in the switching capacity of riboswitch E, and switching activity increased up to 26-fold when the cultivating temperature was reduced from 45 to 30°C. To construct a genetic circuit, riboswitch E was applied to regulate the synthesis of the transcriptional activator GvpE allowing a dose-dependent activation of the mgfp6 reporter gene under P _pA promoter control.

Riboswitches for Controlled Expression of Therapeutic Transgenes Delivered by Adeno-Associated Viral Vectors

Vectors developed from adeno-associated virus (AAV) are powerful tools for in vivo transgene delivery in both humans and animal models, and several AAV-delivered gene therapies are currently approved for clinical use. However, AAV-mediated gene therapy still faces several challenges, including limited vector packaging capacity and the need for a safe, effective method for controlling transgene expression during and after delivery. Riboswitches, RNA elements which control gene expression in response to ligand binding, are attractive candidates for regulating expression of AAV-delivered transgene therapeutics because of their small genomic footprints and non-immunogenicity compared to protein-based expression control systems. In addition, the ligand-sensing aptamer domains of many riboswitches can be exchanged in a modular fashion to allow regulation by a variety of small molecules, proteins, and oligonucleotides. Riboswitches have been used to regulate AAV-delivered transgene therapeutics in animal models, and recently developed screening and selection methods allow rapid isolation of riboswitches with novel ligands and improved performance in mammalian cells. This review discusses the advantages of riboswitches in the context of AAV-delivered gene therapy, the subsets of riboswitch mechanisms which have been shown to function in human cells and animal models, recent progress in riboswitch isolation and optimization, and several examples of AAV-delivered therapeutic systems which might be improved by riboswitch regulation.

rAAV9-UPII-TK-EGFP can precisely transduce a suicide gene and inhibit the growth of bladder tumors

Bladder cancer is a common and widespread cancer of the human urinary system, and its incidence is increasing. Gene therapy is a promising treatment of bladder cancer. In our study, a recombinant adeno-associated virus (rAAV9-UPII-TK-EGFP) driven by a UPII promoter was constructed. The efficacy and safety of infection of bladder cells was tested in vivo and in vitro. The ability of rAAV9-UPII-TK-EGFP to penetrate the glycosaminoglycan (GAG) layer on the surface of bladder cells and to transduce the bladder cells in vivo was very high. Additionally, we confirmed that the TK/GCV system has a powerful cytotoxic effect on bladder tumor cells in vitro and in vivo. Thus, our data indicate that rAAV9-UPII-TK-EGFP is a precise gene drug delivery system for the treatment of bladder cancer, and the TK/GCV therapeutic strategy has a powerful antitumor effect. These findings can be widely used in clinical and scientific studies.

The Theophylline Aptamer: 25 Years as an Important Tool in Cellular Engineering Research

The theophylline aptamer was isolated from an oligonucleotide library in 1994. Since that time, the aptamer has found wide utility, particularly in synthetic biology, cellular engineering, and diagnostic applications. The primary application of the theophylline aptamer is in the construction and characterization of synthetic riboswitches for regulation of gene expression. These riboswitches have been used to control cellular motility, regulate carbon metabolism, construct logic gates, screen for mutant enzymes, and control apoptosis. Other applications of the theophylline aptamer in cellular engineering include regulation of RNA interference and genome editing through CRISPR systems. Here we describe the uses of the theophylline aptamer for cellular engineering over the past 25 years. In so doing, we also highlight important synthetic biology applications to control gene expression in a ligand-dependent manner.

Intracellular Selection of Theophylline-Sensitive Hammerhead Aptazyme

Hammerhead ribozyme-based aptazyme (HHAz), inheriting the advantages of small size and high efficiency from the RNA-cleaving ribozyme and the specific recognition ability of aptamers to specific targets, exhibits the huge potential to be a transgene expression regulator. Herein, we report a selection strategy for HHAz by using a toxin protein IbsC as the reporter to offer a positive phenotype, thus realizing an easy-operating, time- and labor-saving selection of HHAz variants with desired properties. Based on this strategy, we obtained a new HHAz (TAP-1), which could react sensitively toward the extracellular regulatory molecule, theophylline, both in prokaryotic and eukaryotic systems. With fluorescent protein reporter, the intracellular switching efficiencies of TAP-1 and other reported theophylline-dependent HHAzs has been quantitatively evaluated, showing that TAP-1 not only exhibits the best downregulating ability at high concentration of theophylline but also maintains high activity with 0.1 mM theophylline, which is a safe concentration in the human body.

Cleaning Up Mechanistic Debris Generated by Twister Ribozymes Using Computational RNA Enzymology

The catalytic properties of RNA have been a subject of fascination and intense research since their discovery over 30 years ago. Very recently, several classes of nucleolytic ribozymes have emerged and been characterized structurally. Among these, the twister ribozyme has been center-stage, and a topic of debate about its architecture and mechanism owing to conflicting interpretations of different crystal structures, and in some cases conflicting interpretations of the same functional data. In the present work, we attempt to clean up the mechanistic "debris" generated by twister ribozymes using a comprehensive computational RNA enzymology approach aimed to provide a unified interpretation of existing structural and functional data. Simulations in the crystalline environment and in solution provide insight into the origins of observed differences in crystal structures, and coalesce on a common active site architecture, and dynamical ensemble in solution. We use GPU-accelerated free energy methods with enhanced sampling to ascertain microscopic nucleobase pK a values of the implicated general acid and base, from which predicted activity-pH profiles can be compared directly with experiments. Next, ab initio quantum mechanical/molecular mechanical (QM/MM) simulations with full dynamic solvation under periodic boundary conditions are used to determine mechanistic pathways through multi-dimensional free energy landscapes for the reaction. We then characterize the rate-controlling transition state, and make predictions about kinetic isotope effects and linear free energy relations. Computational mutagenesis is performed to explain the origin of rate effects caused by chemical modifications and make experimentally testable predictions. Finally, we provide evidence that helps to resolve conflicting issues related to the role of metal ions in catalysis. Throughout each stage, we highlight how a conserved L-platform structural motif, to- gether with a key L-anchor residue, forms the characteristic active site scaffold enabling each of the catalytic strategies to come together not only for the twister ribozyme, but the majority of the known small nucleolytic ribozyme classes.

Re-engineering 10-23 core DNA- and MNAzymes for applications at standard room temperature

DNA- and MNAzymes are nucleic acid-based enzymes (NAzymes), which infiltrated the otherwise protein-rich field of enzymology three decades ago. The 10-23 core NAzymes are one of the most widely used and well-characterized NAzymes, but often require elevated working temperatures or additional complex modifications for implementation at standard room temperatures. Here, we present a generally applicable method, based on thermodynamic principles governing hybridization, to re-engineer the existing 10-23 core NAzymes for use at 23 °C. To establish this, we first assessed the activity of conventional NAzymes in the presence of cleavable and non-cleavable substrate at 23 °C as well as over a temperature gradient. These tests pointed towards a non-catalytic mechanism of signal generation at 23 °C, suggesting that conventional NAzymes are not suited for use at this temperature. Following this, several novel NAzyme-substrate complexes were re-engineered from the conventional ones and screened for their performance at 23 °C. The complex with substrate and substrate-binding arms of the NAzymes shortened by four nucleotides on each terminus demonstrated efficient catalytic activity at 23 °C. This has been further validated over a dilution of enzymes or enzyme components, revealing their superior performance at 23 °C compared to the conventional 10-23 core NAzymes at their standard operating temperature of 55 °C. Finally, the proposed approach was applied to successfully re-engineer three other new MNAzymes for activity at 23 °C. As such, these re-engineered NAzymes present a remarkable addition to the field by further widening the diverse repertoire of NAzyme applications.