Plasmonic nanoresonators for high-resolution colour filtering and spectral imaging

Overcoming the Structural Incompatibility Between White, Black, and Vibrant Hues in Dynamic Structural Colors

Nature typically creates white and black structural coloration through disordered, dense assemblies of scatterers and absorbers that scatter and absorb light uniformly across the visible range, respectively. However, this approach conflicts with structural coloration designs for vibrant hues, which use ordered and uniform nanostructures. This structural discrepancy presents a challenge when trying to incorporate white and black alongside other colors in dynamic structural colors. Herein, a dynamic reflective coloration strategy is demonstrated, capable of switching between white, black, and other hues from ordered nanostructures. This is accomplished by exploiting reversible Cu electrodeposition within the slits of a nanograting and observing its cross-polarized reflection, resolving colors from the grating birefringence. By electrochemically modulating the Cu thickness, birefringence is selectively activated, mixed, and eliminated from photonic (Rayleigh-Wood) and near-plasmonic resonances, producing blue, orange, white, and black colors. These results offer a pathway to dynamic white and black structural coloration compatible with ordered nanostructures.

Optical interference control for selectively suppressing higher-order modes in all-dielectric tri-layered structures for reflective RGB colors

We present a method to selectively suppress unwanted higher-order resonances in all-dielectric tri-layer structural color filters, achieving reflective red (R), green (G), and blue (B) colors through controlled optical interference. By applying a gradient-based optimization technique, we fine-tune the designs to improve color purity by eliminating undesired resonances outside the passband of the tri-layer structure. The filters are composed of a low-refractive-index (LRI) layer sandwiched between two high-refractive-index (HRI) layers. Higher-order modes in the HRI layers and the fundamental mode in the LRI layer are exploited to generate B and G colors. For the R color, the reverse configuration is used: the HRI layers employ the fundamental mode, and the LRI layer operates in a higher-order mode, which introduces an unwanted peak at λ = 450 nm, significantly affecting color purity. To address this, we reduce the LRI thickness to half of the quarter-wave thickness (QWT) and increase the HRI thickness to a quarter of the QWT, shifting interference from constructive to destructive at λ = 450 nm while preserving constructive interference at λ = 642 nm. This effectively suppresses the higher-order mode, resulting in a pure R color. Our study provides valuable insights into the optical design of multilayer thin-film structures, with potential applications in reflective displays, image sensors, and colored solar cells.

Multi-Resonance 1,4-BN-Heteroarene for Filterless Narrowband Photodetector

As an emerging class of optoelectronic materials, multi-resonance (MR) 1,4-BN-heteroarenes have been extensively employed as narrowband electroluminescence materials, whereas their absorption feature has largely been neglected. Here we construct the first MR-molecule-based phototransistor for filterless narrowband photodetectors (NBPDs) by anchoring narrowband absorption MR molecules on a high-mobility semiconductor indium-zinc-oxide (IZO) film. The resulting device exhibits high-performance photodetection with a small full-width at half-maximum (FWHM) of 33 nm, which represents a new record for NBPDs based on intrinsic narrowband absorbing materials. These results demonstrate the great potential of MR materials as a new molecular platform for developing high-performance NBPDs.

Operando Colorations from Real-Time Growth of 3D-Printed Nanoarchitectures

While artificial 3D nanostructures can generate precise and flexible coloration, their real-time color changes during 3D nanoprinting remain unexplored owing to the inherent challenges of in situ transient measurements and observations. In this study, a 3D-printing system which supports the operando observation/measurement of the color dynamics of subwavelength metallic nanoarchitectures fabricated in real time is developed and evaluated. During 3D printing, the dimensions and geometries of the 3D nanostructures grow over time, producing a large library of optical spectra associated with real-time color changes. Only a timer is needed to define the expected colors from a single 3D print run. Fin-like nanostructures are used to toggle colors based on the polarization effect and produce color gradients. Based on structural coloration, nanoarchitectures are designed and printed to animate desired color patterns. Moreover, the resulting color dynamics can also serve as an operando identifier for real-time structural information during 3D nanoprinting. A single print run enables the efficient creation of a comprehensive library of desired colorations owing to the flexibility in time-dependent controllability and 3D geometries at the subwavelength scale. 3D nanoprinted plasmonic structures exhibiting time-varying colorations (4D printing of colors) uniquely redefines the coloring stategy, offering considerable potential for numerous applications.

3D Bulk Metamaterials with Engineered Optical Dispersion at Terahertz Frequencies Utilizing Amorphous Multilayered Split-Ring Resonators

A 3D bulk metamaterial (MM) containing amorphous multilayered split-ring resonators is proposed, fabricated, and evaluated. Experimentally, the effective refractive index is engineered via the 3D bulk MM, with a contrast of 0.118 across the frequency span from 0.315 to 0.366 THz and the index changing at a slope of 2.314 per THz within this frequency range. Additionally, the 3D bulk MM exhibits optical isotropy with respect to polarization. Moreover, the peak transmission and optical dispersion are tailored by adjusting the density of the split-ring resonators. Compared to reported conventional approaches for constructing bulk MMs, this approach offers advantages in terms of the potential for large-scale manufacturing, the ability to adopt any shape, optical isotropy, and rapid optical dispersion. These features hold promise for dispersive optical devices operating at THz frequencies, such as high-dispersive prisms for high-resolution spectroscopy.

Diatom Cribellum-Inspired Hierarchical Metamaterials: Unifying Perfect Absorption Toward Subwavelength Color Printing

Diatom exoskeletons, known as frustules, exhibit a unique multilayer structure that has attracted considerable attention across interdisciplinary research fields as a source of biomorphic inspiration. These frustules possess a hierarchical porous structure, ranging from millimeter-scale foramen pores to nanometer-scale cribellum pores. In this study, this natural template for nanopattern design is leveraged to showcase metamaterials that integrates perfect absorption and subwavelength color printing. The cribellum-inspired hierarchical nanopatterns, organized in a hexagonal unit cell with a periodicity of 300 nm, are realized through a single-step electron beam lithography process. By employing numerical models, it is uncovered that an additional induced collective dipole mode is the key mechanism responsible for achieving outstanding performance in absorption, reaching up to 99%. Analysis of the hierarchical organization reveals that variations in nanoparticle diameter and inter-unit-cell distance lead to shifts and broadening of the resonance peaks. It is also demonstrated that the hierarchical nanopatterns are capable of color reproduction with high uniformity and fidelity, serving as hexagonal pixels for high-resolution color printing. These cribellum-inspired metamaterials offer a novel approach to multifunctional metamaterial design, presenting aesthetic potential applications in the development of robotics and wearable electronic devices, such as smart skin or surface coatings integrated with energy harvesting functionalities.

Multilayer all-dielectric metasurfaces expanding color gamut

Structural color, arising from the interaction between nanostructures and light, has experienced rapid development in recent years. However, high-order Mie resonances in dielectric materials often induce unnecessary sub-peaks, particularly at shorter wavelengths, reducing the vibrancy of colors. To address this, we have developed a multilayer dielectric metasurface based on silicon-rich silicon nitride (SRN), achieving expanded color gamut through precise refractive index matching and suppression of high-order resonances. This strategy introduces more design dimensions and can reduce the complexity of material deposition. It enables the generation of vibrant colors in a 3 × 3 array, with a resolution of approximately 25,400 dpi, demonstrating its potential applications in displays.

Phonon-mediated infrared plasmonic metamaterial emitters towards high-capacity multifunctional encoding and display

This study introduces what we believe is a novel approach to manipulating light in the mid-infrared spectrum through phonon-mediated metal-insulator-metal (MIM) cavities. Leveraging the unique interactions between resonantly excited electric and magnetic dipoles and phonons within silicon dioxide spacers, we have developed a technology different from traditional methods that rely on geometric modifications of nanostructures, offering a more versatile and effective means of tailoring light-matter interactions at the nanoscale. Our experimental results showcase the ability of these MIM cavities to perform multifunctional information encoding, display, and concealment with high precision. Notably, we encoded 13 distinct gray levels, surpassing previous capabilities in the long-wave infrared spectrum using metamaterial emitters. Furthermore, the incorporation of rotating nanorod structures enabled the encoding of grayscale patterns through polarization states, enhancing the potential for high-capacity information storage. The study also demonstrates the capability of these structures for subwavelength-resolution printing and near-diffraction-limit information encoding in the long-wave infrared band. We have successfully employed an innovative ink coating method, transparent in the long-wave infrared but opaque in the visible spectrum, to conceal encoded information, thereby adding a layer of security. In summary, the phonon-mediated infrared plasmonic metamaterial emitters presented in this work pave the way for future research in high-capacity information storage, anti-counterfeiting, and security technologies.

Color Generation and Polarization-Sensitive Encryption by Laser Writing on Plasmonic Reflector Arrays

Plasmonic color printing presents a sustainable solution for vibrant and durable color reproduction by leveraging the light-manipulating properties of nanostructures. However, the fabrication of plasmonic nanostructures has posed challenges, hindering widespread adoption. In this paper, we introduce plasmonic reflector arrays (PRAs) composed of three layers─Ag nanoparticles (NPs), an Al2O3 spacer, and an Ag reflector─deposited via physical vapor deposition (PVD). By employing nanosecond and femtosecond laser writing techniques, we manipulate the surface morphology of silver nanoparticles on PRAs, resulting in a diverse range of structural colors that are both polarization-insensitive and polarization-sensitive. Furthermore, we demonstrate the versatility of nanosecond laser writing in creating intricate patterns on PRAs. Additionally, we propose a novel two-step method combining nanosecond and femtosecond laser processing to embed QR code patterns into PRAs, showcasing their potential for secure data encryption and transmission. This research underscores the promising applications of PRAs in advanced color printing and secure optical data encoding.

Tailoring resonant modes in dual cavities for transmissive structural colors with high brightness and high purity

We present quad-layered structural color filters producing transmissive red (R), green (G), and blue (B) colors with high brightness and high purity, where thicknesses of layers for the RGB colors are optimized by using a L-BFGS-B algorithm. To evaluate the performance of the proposed structural color filters, computer-based inverse designs based on meta-heuristic and reinforcement learning algorithms are employed, where the optical properties obtained from the inverse designs are comparable to those shown in our proposed design. A peak separation phenomenon in dual cavities is applied to make a spectral response rectangular, and also a resonance order is optimally tailored to maximize the transmittance at a resonant wavelength with the suppression of undesired higher-order resonances at the same time for achieving pure colors. Transmission efficiency over 75% and the full width at half-maximum (FWHM) less than 90 nm are achieved. Besides, selecting a cavity medium with a high refractive index allows the optical properties of the structural color filters to remain almost constant in wavelength over a broad range of incident angles up to 60°. Moreover, only a few deposition steps are necessary, thus leading to a much simple fabrication as compared to previous works that involve a series of complicated lithographic processes. The approach described in this study may provide new ways for achieving diverse applications, such as displays, imaging devices, decorations, and colored solar cells.

Exploring the efficacy of subwavelength gratings as short-wavelength infrared filters

Advancements in nanofabrication technology have greatly facilitated research on nanostructures and their associated properties. Among these structures, subwavelength components have emerged as promising candidates for ultra-compact optical elements, can potentially supplant conventional optical components and enable the realization of compact and efficient optical devices. Spectral analysis within the infrared spectrum offers a wealth of information for monitoring crop health, industrial processes, and target identification. However, conventional spectrometers are typically bulky and expensive, driving an increasing demand for cost-effective spectral sensors. Here we investigate three distinct subwavelength grating structures designed to function as narrowband filters within the short-wavelength infrared (SWIR) range. Through simple adjustments to the period of grating strips, these filters selectively transmit light across a wide wavelength range from 1100 to 1700 nm with transmission exceeding 70% and full width at half maximum (FWHM) down to 6 nm. Based on a simple design, the results present great potential of subwavelength grating filters for multiband integration and developing ultra-compact spectral sensors.

Resonant-mode engineering for additive reflective structural colors with high brightness and high color purity

We present quad-layered reflective structural color filters generating vivid additive primary colors by controlling a mode number in a Fabry-Perot (FP) cavity and an anti-reflective (AR) coating layer, thus accomplishing high spectral contrast which is highly demanded in creating sharp colors. The reflection brightness of fabricated structural color filters is over 78% and a color gamut is comparable to the standard color gamut (sRGB). Higher-order resonant modes are exploited yielding a narrow passband with strong suppression of the reflection at shorter and longer wavelength ranges for a green color, while red and blue colors are produced by employing fundamental resonant modes. Besides, the structural color filters maintain both high brightness and high color purity at oblique incidence angles up to 40° due to a small angle of refraction by a cavity medium with high refractive index. Moreover, a large-scale fabrication is enabled owing to the simplicity of a device structure, where thin film deposition is used. The scheme presented in this work may open the door to a number of applications, such as reflective displays, imaging devices, colored photovoltaics, and decorations.

Pixelated gradient thickness optical filter for visible light spectroscopy

A miniature low-cost pixelated gradient thickness optical filter is proposed to achieve spectroscopy in the visible wavelength range. The optical filter consists of a two-dimensional array of metal-dielectric-metal thin films arranged in Fabry-Pérot filter configurations with discretely varying cavity thicknesses. The wavelength-selective characterization of each filter is performed by measuring the transmittance over the visible wavelength range. The pixelated gradient thickness filter is equipped with a CMOS image sensor, and its performance as a spectroscopic module is evaluated by illuminating different monochromatic wavelengths on it. The target spectra are successfully reconstructed from the output signals recorded in the sensor from the respective pixelated gradient thickness filters. The technological competence of the proposed filter will enable its use in handheld devices to widen its application range in day-to-day life.

Aperiodic Bragg Reflectors for Tunable High-Purity Structural Color Based on Phase Change Material

Tunable thin-film coating-based reflective color displays have versatile applications including image sensors, camouflage devices, spatial light modulators, and intelligent windows. However, generating high-purity colors using such coatings have posed a challenge. Here, we reveal high-purity color generation using an ultralow-loss phase change material (Sb2S3)-based tunable aperiodic distributed Bragg reflector (A-DBR). By strategically adjusting the periodicity of the adjacent layers of A-DBRs, we realize a narrow photonic bandgap with high reflectivity to generate high-purity orange and yellow colors. In particular, we demonstrate an A-DBR with a large photonic bandgap tunability by changing the structural phase of Sb2S3 layers from amorphous to crystalline. Moreover, we experimentally tailor multistate tunable colors through external optical stimuli. Unlike conventional nano thin-film coatings, our proposed approach offers an irradiance-free, narrowband, and highly reflective color band, achieving exceptional color purity by effectively suppressing reflections in off-color bands.

Snapshot spectral imaging: from spatial-spectral mapping to metasurface-based imaging

Snapshot spectral imaging technology enables the capture of complete spectral information of objects in an extremely short period of time, offering wide-ranging applications in fields requiring dynamic observations such as environmental monitoring, medical diagnostics, and industrial inspection. In the past decades, snapshot spectral imaging has made remarkable breakthroughs with the emergence of new computational theories and optical components. From the early days of using various spatial-spectral data mapping methods, they have evolved to later attempts to encode various dimensions of light, such as amplitude, phase, and wavelength, and then computationally reconstruct them. This review focuses on a systematic presentation of the system architecture and mathematical modeling of these snapshot spectral imaging techniques. In addition, the introduction of metasurfaces expands the modulation of spatial-spectral data and brings advantages such as system size reduction, which has become a research hotspot in recent years and is regarded as the key to the next-generation snapshot spectral imaging techniques. This paper provides a systematic overview of the applications of metasurfaces in snapshot spectral imaging and provides an outlook on future directions and research priorities.

Planar 16-band metasurface-enhanced spectral filter for integrated image sensing

We study theoretically and demonstrate experimentally a 16-band narrow band wavelength selective filter in the near-infrared range. The combination of a pair of distributed Bragg reflectors with a sub-wavelength grating metasurface embedded in the intra-cavity provides a narrow response which can be tuned by adjusting the geometry of the sub-wavelength grating metasurface. The key advantage of this approach is its ease of fabrication, where the spectral response is tuned by merely changing the grating period, resulting in a perfectly planar geometry that can be easily integrated with a broad variety of photodetectors, thus enabling attractive applications such as bio-imaging, time-of-flight sensors and LiDAR. The experimental results are supported by numerical simulations and effective medium theory that unveil the mechanisms that lead to the optical response of the device. It is also shown how the polarization dependence of the structure can be used to determine very accurately the polarization of incoming light.

Stretchable structural colors with polarization dependence using lithium niobate metasurfaces

Independently tunable biaxial color pixels, composed of isolated nanosquare dimers, are demonstrated in this study. These pixels are capable of displaying a full range of colors under a linear-polarization dependent reflection mode. The metasurface is constructed by arranging LiNbO3 nanodimers on a PDMS substrate. By exciting a strong magnetic dipole (MD) resonance and effectively suppressing other multipolar resonances using surface lattice resonances, the researchers achieved a single reflection peak with a bandwidth of less than 9 nm and a reflective efficiency of up to 99%. Additionally, the stretchability of the PDMS substrate allows for active and continuous tuning of the metasurface by up to 40% strain, covering almost 150 nm of the visible light spectrum and enabling changes in reflection color. This metasurface holds potential applications in various fields, such as color displays, data storage, and anti-counterfeiting technologies.

Fast Response, High Spectral Rejection Ratio, Self-Filtered Ultranarrowband Photodetectors Based on Perovskite Single-Crystal Heterojunctions

Narrowband photodetectors have wide application potential in high-resolution imaging and encrypted communication, due to their high-precision spectral resolution capability. In this work, we report a fast response, high spectral rejection ratio, and self-filtered ultranarrowband photodetector with a new mechanism, which introduces bulk recombination by doping Bi3+ and cooperates with surface recombination for further quenching photogenerated charges generated by short-wavelength-light excitation in perovskite single-crystal. A perovskite film focused on collecting charges is fabricated on the single crystal by a lattice-matched solution-processed epitaxial growth method. Due to the formation of PN heterojunctions, a narrowband photodetector in this mechanism has remarkable spectral selectivity and detection performance with an ultranarrow full width at half-maximum (FWHM) of 7.7 nm and a high spectral rejection ratio of 790, as well as a high specific detectivity up to 1.5 × 1010 Jones, a fast response speed with a rise time and fall time of ∼8 and 137 μs. The ultrafast and ultranarrow spectra response of self-filtered narrowband photodetector provides a new strategy in high-precision and high-resolution photoelectric detection.

Effects of Nanosecond Pulsed Electric Field on Immune Checkpoint Receptors in Melanoma Cells

Checkpoint molecules such as PD-1, LAG-3, and TIM-3 are currently under extensive investigation for their roles in the attenuation of the immune response in cancer. Various methods have been applied to overcome the challenges in this field. This study investigated the effects of nanosecond pulsed electric field (nsPEF) treatment on the expression of immune checkpoint molecules in A375 and C32 melanoma cells. The researchers found that the nsPEF treatment was able to enhance membrane permeabilization and morphological changes in the cell membrane without being cytotoxic. We found that the effects of nsPEFs on melanoma included (1) the transport of vesicles from the inside to the outside of the cells, (2) cell contraction, and (3) the migration of lipids from inside the cells to their peripheries. The treatment increased the expression of PD-1 checkpoint receptors. Furthermore, we also observed potential co-localization or clustering of MHC class II and PD-1 molecules on the cell surface and the secretion of cytokines such as TNF-α and IL-6. These findings suggest that nsPEF treatment could be a viable approach to enhance the delivery of therapeutic agents to cancer cells and to modulate the tumor microenvironment to promote an antitumor immune response. Further studies are needed to explore the mechanisms underlying these effects and their impacts on the antitumor immune response, and to investigate the potential of nsPEF treatment in combination with immune checkpoint inhibitors to improve clinical outcomes for cancer patients.

Pixelated Filter Array for On-Chip Polarized Spectral Detection

On-chip multi-dimensional detection systems integrating pixelated polarization and spectral filter arrays are the latest trend in optical detection instruments, showing broad application potential for diagnostic medical imaging and remote sensing. However, thin-film or microstructure-based filter arrays typically have a trade-off between the detection dimension, optical efficiency, and spectral resolution. Here, we demonstrate novel on-chip integrated polarization spectral detection filter arrays consisting of metasurfaces and multilayer films. The metasurfaces with two nanopillars in one supercell are designed to modulate the Jones matrix for polarization selection. The angle of diffraction of the metasurfaces and the optical Fabry-Perot (FP) cavities determine the spectrum's center wavelength. The polarization spectral filter arrays are placed on top of the CMOS sensor; each array corresponds to one pixel, resulting in high spectral resolution and optical efficiency in the selected polarization state. To verify the methodology, we designed nine-channel polarized spectral filter arrays in a wavelength range of 1350 nm to 1550 nm for transverse electric (TE) linear polarization. The array has a 10 nm balanced spectral resolution and average peak transmission efficiency of over 75%, which is maintained by utilizing lossless dielectric material. The proposed array can be fabricated using overlay e-beam lithography, and the process is CMOS-compatible. The proposed array enables broader applications of in situ on-chip polarization spectral detection with high efficiency and spectral resolution, as well as in vivo imaging systems.

A novel plasmonic metal-semiconductor-insulator-metal (MSIM) color sensor compatible with CMOS technology

Color detection is one of the top interests in both biological and industrial applications. Specifically, the Determination of the light wave characteristics is vital in photonic technology. One of the features in the color sense that should be found out is its wavelength or color. In this work, we propose a structure that can be used to detect RGB colors separately in an efficient way. The proposed detector consists of the plasmonic filter sensing desired wavelength (red, green, and blue) and the PN diode to convert the received photons to the electrical current. At the input intensity of 1 mW × cm-2, the current density for blue, green, and red colors are 27, 35, and 48 µA × cm-2, respectively. It is shown that the intensities needed to obtain the current densities of 0.1 µA × cm-2 are 3.94, 2.98, and 2.25 µW × cm-2 for the blue, green, and red spectra respectively. It should mention that by using high-precision photodetector structures such as PIN diode, the minimum detectable level can be decreased. Simple adjusting for desired wavelength and linear operation for different input intensities are the characteristics of the designed structure. This detector is compatible with CMOS technology and can be easily utilized in numerous applications, such as charge-coupled devices, displays, and cameras.

Flexible long-wave infrared snapshot multispectral imaging with a pixel-level spectral filter array

This paper proposes and demonstrates a flexible long-wave infrared snapshot multispectral imaging system consisting of a simple re-imaging system and a pixel-level spectral filter array. A six-band multispectral image in the spectral range of 8-12 µm with full width at half maximum of about 0.7 µm each band is acquired in the experiment. The pixel-level multispectral filter array is placed at the primary imaging plane of the re-imaging system instead of directly encapsulated on the detector chip, which diminishes the complexity of pixel-level chip packaging. Furthermore, the proposed method possesses the merit of flexible functions switching between multispectral imaging and intensity imaging by plugging and unplugging the pixel-level spectral filter array. Our approach could be viable for various practical long-wave infrared detection applications.

A Genetic Algorithm for Universal Optimization of Ultrasensitive Surface Plasmon Resonance Sensors with 2D Materials

We present a general optimization technique for surface plasmon resonance, (SPR) yielding a range of ultrasensitive SPR sensors from a materials database with an enhancement of ∼100%. Applying the algorithm, we propose and demonstrate a novel dual-mode SPR structure coupling SPP and a waveguide mode within GeO2 featuring an anticrossing behavior and an unprecedented sensitivity of 1364 deg/RIU. An SPR sensor operating at wavelengths of 633 nm having a bimetal Al/Ag structure sandwiched between hBN can achieve a sensitivity of 578 deg/RIU. For a wavelength of 785 nm, we optimized a sensor as a Ag layer sandwiched between hBN/MoS2/hBN heterostructures achieving a sensitivity of 676 deg/RIU. Our work provides a guideline and general technique for the design and optimization of high sensitivity SPR sensors for various sensing applications in the future.

Spiral Chiral Metamaterial Structure Shape for Optical Activity Improvements

We report on a spiral structure suitable for obtaining a large optical response. We constructed a structural mechanics model of the shape of the planar spiral structure when deformed and verified the effectiveness of the model. As a verification structure, we fabricated a large-scale spiral structure that operates in the GHz band by laser processing. Based on the GHz radio wave experiments, a more uniform deformation structure exhibited a higher cross-polarization component. This result suggests that uniform deformation structures can improve circular dichroism. Since large-scale devices enable speedy prototype verification, the obtained knowledge can be exported to miniaturized-scale devices, such as MEMS terahertz metamaterials.

Plasmonic Metamaterial Ag Nanostructures on a Mirror for Colorimetric Sensing

In this study, we demonstrate the localized surface plasmon resonance (LSPR) in the visible range by using nanostructures on mirrors. The nanohemisphere-on-mirror (NHoM) structure is based on random nanoparticles that were obtained by heat-treating silver thin films and does not require any top-down nanofabrication processes. We were able to successfully tune over a wide wavelength range and obtain full colors using the NHoM structures, which realized full coverage of the Commission Internationale de l'Eclairage (CIE) standard RGB (sRGB) color space. Additionally, we fabricated the periodic nanodisk-on-glass (NDoG) structure using electron beam lithography and compared it with the NHoM structure. Our analysis of dark-field microscopic images observed by a hyperspectral camera showed that the NHoM structure had less variation in the resonant wavelength by observation points compared with the periodic NDoG structure. In other words, the NHoM structure achieved a high color quality that is comparable to the periodic structure. Finally, we proposed colorimetric sensing as an application of the NHoM structure. We confirmed the significant improvement in performance of colorimetric sensing using the NHoM structure and succeeded in colorimetric sensing using protein drops. The ability to fabricate large areas in full color easily and inexpensively with our proposed structures makes them suitable for industrial applications, such as displays, holograms, biosensing, and security applications.

Grayscale-patterned integrated multilayer-metal-dielectric microcavities for on-chip multi/hyperspectral imaging in the extended visible bandwidth

Pixelated filter arrays of Fabry-Perot (FP) cavities are widely integrated with photodetectors to achieve a WYSIWYG ("what you see is what you get") on-chip spectral measurements. However, FP-filter-based spectral sensors typically have a trade-off between their spectral resolution and working bandwidth due to design limitations of conventional metal or dielectric multilayer microcavities. Here, we propose a new idea of integrated color filter arrays (CFAs) consisting of multilayer metal-dielectric-mirror FP microcavities that, enable a hyperspectral resolution over an extended visible bandwidth (∼300 nm). By introducing another two dielectric layers on the metallic film, the broadband reflectance of the FP-cavity mirror was greatly enhanced, accompanied by as-flat-as-possible reflection-phase dispersion. This resulted in balanced spectral resolution (∼10 nm) and spectral bandwidth from 450 nm to 750 nm. In the experiment, we used a one-step rapid manufacturing process by using grayscale e-beam lithography. A 16-channel (4 × 4) CFA was fabricated and demonstrated on-chip spectral imaging with a CMOS sensor and an impressive identification capability. Our results provide an attractive method for developing high-performance spectral sensors and have potential commercial applications by extending the utility of low-cost manufacturing process.

A neuromorphic bionic eye with filter-free color vision using hemispherical perovskite nanowire array retina

Spherical geometry, adaptive optics, and highly dense network of neurons bridging the eye with the visual cortex, are the primary features of human eyes which enable wide field-of-view (FoV), low aberration, excellent adaptivity, and preprocessing of perceived visual information. Therefore, fabricating spherical artificial eyes has garnered enormous scientific interest. However, fusing color vision, in-device preprocessing and optical adaptivity into spherical artificial eyes has always been a tremendous challenge. Herein, we demonstrate a bionic eye comprising tunable liquid crystal optics, and a hemispherical neuromorphic retina with filter-free color vision, enabled by wavelength dependent bidirectional synaptic photo-response in a metal-oxide nanotube/perovskite nanowire hybrid structure. Moreover, by tuning the color selectivity with bias, the device can reconstruct full color images. This work demonstrates a unique approach to address the color vision and optical adaptivity issues associated with artificial eyes that can bring them to a new level approaching their biological counterparts.

Sodium-Based Concave Metasurfaces for High Performing Plasmonic Optical Filters by Templated Spin-on-Sodiophobic-Glass

Optical filters have aroused tremendous excitement in advanced photonic instruments and modern digital displays due to their flexible capability of spectrum manipulation. Plasmonic metasurfaces of narrow bandwidth, high spectral contrast, and robust structure tolerance are highly desired for optical filtration (especially in the visible regime) but rather challenging as large spectral broadening from intrinsic ohmic loss and design/fabrication deviations. Here the high-performing sodium-based metasurfaces are demonstrated for optical filtration across 450 to 750 nm by unique structure design of spatially decoupled concave surfaces and precise fabrication through templated solidification of liquid metals. Thanks to the distinct suppression of metallic loss as well as fabrication tolerance of interfacial structures, the as-prepared concave metasurfaces enable a minimum linewidth of ≈15 nm, a maximal optical contrast of ≈93%, and a high measure-to-design spectral match ratio ≈1500. These results have for the first time pushed the operation wavelengths of sodium-based plasmonic devices from infrared to visible which in turn demonstrates the capability of filling the blank of commercial dielectric optical filters thus far.

Optical metasurfaces for multiplex high-performance grating-type structural colors

Optical metasurfaces provide a significant approach for the production of structural colors due to their excellent optical control abilities. Herein, we propose trapezoidal structural metasurfaces for achieving multiplex grating-type structural colors with high comprehensive performance originating from the anomalous reflection dispersion in the visible band. Single trapezoidal metasurfaces with different x-direction periods can tune the angular dispersion regularly from 0.036 rad/nm to 0.224 rad/nm to generate various structural colors, and composite trapezoidal metasurfaces with three kinds of combinations can achieve multiplex sets of structural colors. The brightness can be controlled by adjusting the distance between the trapezoids in a pair accurately. The designed structural colors have higher saturation than traditional pigmentary colors, whose excitation purity can reach 1.00. The gamut is about 158.1% of the Adobe RGB standard. This research has application potential in ultrafine displays, information encryption, optical storage, and anti-counterfeit tagging.

Near-flat top bandpass filter based on non-local resonance in a dielectric metasurface

Localized light matter interaction at a resonant nanostructure facilitates spectrally selective transmission of light, which has led to demonstrations of ultrathin metasurface based optical filters. Unfortunately, due to the nature of Lorentzian spectral line shape in such resonances, it is inevitable to suffer significant spectral crosstalk. In this work, we demonstrate a conceptually new type of spectral filter which exhibits near flat-top bandpass with minimized spectral overlaps. To realize this, we leverage the recent development of non-local resonance in dielectric nanostructure to design a double-layered optical filter with performance comparable to the ideal spectral filters. The designed metasurface shows averaged transmission of more than 90% across the target spectral band and suppressed transmission of less than 10% out of the spectral band.

Actively tunable linear and circular dichroic metamirrors based on single-layer graphene

Aiming at the problems of low efficiency, single function and complex structure of the existing dichroic metamirrors, the actively tunable linear and circular dichroic metamirrors based on single-layer graphene are proposed in this study. The designed metamirrors are mainly composed of the ion-gel, patterned graphene, polyimide, polysilicon and gold substrates. The anisotropy of the achiral structures can be used to realize circular dichroism (0.8) and linear dichroism (0.9) in two directions at the same time without functional switching. Additionally, the incidence angle of electromagnetic waves, rather than the structural chirality, is used to create the exceptionally strong dichroism. The proposed metamirrors not only increase the integration, but also reduce the angular dispersion and complexity of the structure. What's more, by changing the Fermi level of graphene, the CD function of the metamirrors can be tuned in the range of 0 - 0.8, and the LD function can be tuned in the range of 0.22 - 0.9. The designed metamirrors can achieve dual functions under a wide range of incident angles, and can be widely used in various fields such as terahertz imaging, biological detection, optical sensing, and spectrometry.

Versatile full-colour nanopainting enabled by a pixelated plasmonic metasurface

The growing interest to develop modern digital displays and colour printing has driven the advancement of colouration technologies with remarkable speed. In particular, metasurface-based structural colouration shows a remarkable high colour saturation, wide gamut palette, chiaroscuro presentation and polarization tunability. However, previous approaches cannot simultaneously achieve all these features. Here, we design and experimentally demonstrate a surface-relief plasmonic metasurface consisting of shallow nanoapertures that enable the independent manipulation of colour hue, saturation and brightness by individually varying the geometric dimensions and orientation of the nanoapertures. We fabricate microscale artworks using a reusable template-stripping technique that features photorealistic and stereoscopic impressions. In addition, through the meticulous arrangement of differently oriented nanoapertures, kaleidoscopic information states can be decrypted by particular combinations of incident and reflected polarized light.

Lithium-plasmon-based low-powered dynamic color display

Display and power supply have been two essential and independent cornerstones of modern electronics. Here, we report a lithium-plasmon-based low-powered dynamic color display with intrinsic dual functionality (plasmonic display and energy recycling unit) which is a result of the electric-field-driven transformation of nanostructured lithium metals. Dynamic color displays are enabled by plasmonic transformation through electrodeposition (electrostripping) of lithium metals during the charging (discharging) process, while the consumed energy for coloring can be retrieved in the inverse process respectively. Energy recycling of lithium metals brings energy consumption down to 0.390 mW cm-2 (0.105 mW cm-2) for the active (static) coloration state of a proof-of-concept display/battery device, which approaches nearly-zero-energy-consumption in the near-100%-energy-efficiency limit of commercial lithium batteries. Combining the subwavelength feature of plasmonics with effective energy recycling, the lithium-plasmon-based dynamic display offers a promising route towards next-generation integrated photonic devices, with the intriguing advantages of low energy consumption, a small footprint and high resolution.

Funneling of Oblique Incident Light through Subwavelength Metallic Slits

Light funneling determines how enhanced energy flows into subwavelength slits. In contrast to the previous research on oblique incident light, this study reveals that light funneling in the slits can be highly asymmetric, even at small angles. This mechanism is explained by polarized fields and charges, which are induced using Poynting vectors. It is shown that when light is obliquely incident to the slits perforated in a perfect electric conductor, asymmetrical fields and charges accumulate at the upper apex corners of the left (right) sides. When light is incident from the left (right) side, more (less) induced fields and charges accumulate in the left (right) slit corner so that the funneling width, area, and energy flow at the left (right) side increases (decreases).

Optimization of metamaterials and metamaterial-microcavity based on deep neural networks

Computational inverse-design and forward prediction approaches provide promising pathways for on-demand nanophotonics. Here, we use a deep-learning method to optimize the design of split-ring metamaterials and metamaterial-microcavities. Once the deep neural network is trained, it can predict the optical response of the split-ring metamaterial in a second which is much faster than conventional simulation methods. The pretrained neural network can also be used for the inverse design of split-ring metamaterials and metamaterial-microcavities. We use this method for the design of the metamaterial-microcavity with the absorptance peak at 1310 nm. Experimental results verified that the deep-learning method is a fast, robust, and accurate method for designing metamaterials with complex nanostructures.

Suppressing the spectral shift of a polarization-independent nanostructure with multiple resonances

Resonances are the cornerstone of photonic applications in many areas of physics and engineering. The spectral position of a photonic resonance is dominated by the structure design. Here, we devise a polarization-independent plasmonic structure comprising nanoantennas with two resonances on an epsilon-near-zero (ENZ) substrate in order to loosen this correlation to obtain less sensitivity to geometrical perturbations of the structure. Compared with the bare glass substrate, the designed plasmonic nanoantennas on an ENZ substrate exhibit a nearly three-fold reduction only in the resonance wavelength shift near the ENZ wavelength as a function of antenna length.

Asymmetric nanocavities with wide reflection color gamut for color printing

Symmetric metal-dielectric-metal (MDM) nanocavities based on Fabry-Perot resonance play a crucial role in transmission colors. However, their reflection color gamuts are generally limited owing to the narrow dip of resonance spectrum. In this work, we propose and fabricate symmetric titanium-indium tin oxide-silver (Ti/ITO/Ag) nanocavities to realize the reflection colors. The experimental and simulation results show that reflection color gamut of the asymmetric nanocavity is wider than that of symmetric MDM nanocavity due to the generation of broader resonance spectral dip. Moreover, a grayscale focused ion beam (FIB) etching method is employed to fabricate the thickness-controlled microstructures, and the etching depth satisfies a linear relationship with the gray value. The reflection color image can be observed by fabricating the ITO layer in the asymmetric MDM nanocavity with grayscale FIB etching method, which is more vivid than the image from fabricated symmetric MDM nanocavities. This work will provide a new way for color printing, color display, and ultra-small anti-counterfeiting technology.

Super-Resolution Displacement Spectroscopic Sensing over a Surface "Rainbow"

Subwavelength manipulation of light waves with high precision can enable new and exciting applications in spectroscopy, sensing, and medical imaging. For these applications, miniaturized spectrometers are desirable to enable the on-chip analysis of spectral information. In particular, for imaging-based spectroscopic sensing mechanisms, the key challenge is to determine the spatial-shift information accurately (i.e., the spatial displacement introduced by wavelength shift or biological or chemical surface binding), which is similar to the challenge presented by super-resolution imaging. Here, we report a unique "rainbow" trapping metasurface for on-chip spectrometers and sensors. Combined with super-resolution image processing, the low-setting 4× optical microscope system resolves a displacement of the resonant position within 35 nm on the plasmonic rainbow trapping metasurface with a tiny area as small as 0.002 mm2. This unique feature of the spatial manipulation of efficiently coupled rainbow plasmonic resonances reveals a new platform for miniaturized on-chip spectroscopic analysis with a spectral resolution of 0.032 nm in wavelength shift. Using this low-setting 4× microscope imaging system, we demonstrate a biosensing resolution of 1.92 × 109 exosomes per milliliter for A549-derived exosomes and distinguish between patient samples and healthy controls using exosomal epidermal growth factor receptor (EGFR) expression values, thereby demonstrating a new on-chip sensing system for personalized accurate bio/chemical sensing applications.

Ultra-Thin and Lithography-Free Transmissive Color Filter Based on Doped Indium Gallium Zinc Oxide with High Performance

A kind of ultra-thin transmissive color filter based on a metal-semiconductor-metal (MSM) structure is proposed. The displayed color can cover the entire visible range and switches after H₂ treatment. An indium gallium zinc oxide (IGZO) semiconductor was employed, as the concentration of charge carriers can be controlled to adjust the refractive index and achieve certain colors. The color modulation in the designed structure was verified using the rigorous coupled wave analysis (RCWA) method. The angular independence of the relative transmission could reach up to 60°, and polarization-insensitive performance could also be maintained. Numerical results demonstrated that the thickness of IGZO was the key parameter to concentrate the incident light. The overall structure is planar and lithography-free and can be produced with simple preparation steps. The obtained results can also be extended to other similar resonators where a proper cavity allows dynamical functionality.

Plasmonic Color Printing via Bottom-Up Laser-Induced Photomodification Process

Plasmonic color printing has received significant attention owing to its advantages such as nonfading and nontoxic color expression, without necessitating the use of chemical dyes. Recently, color generation from laser-induced plasmonic nanostructures has been extensively explored because of its simplicity, cost-effectiveness, and large-scale processability. However, these methods usually utilize a top-down method that causes unexpected background colors. Here, we proposed a novel method of plasmonic color printing via a bottom-up type laser-induced photomodification process. In the proposed method, selective silver nanoparticles (Ag NPs) structure could be fabricated on a transparent substrate through a unique organometallic solution-based laser patterning process. A set of color palettes was formed on the basis of different processing parameters such as laser fluence, scanning speed, and baking time. This color change was verified by finite-difference time-domain (FDTD) simulations via monitoring the spectral peak shift of the localized surface plasmon resonance (LSPR) at Ag NPs. It was also confirmed that the colors can be fabricated at a relatively high scanning speed (≥10 mm/s) on a large substrate (>300 mm²). Since semitransparent color images can be patterned on various transparent substrates, this process will broaden the application range of laser-induced plasmonic color generation.

Compact multispectral photodetectors based on nanodisk arrays atop optical cavity substrates

It is challenging for the multi-spectral photodetector to have a compact structure, high spectral resolution, and high detection efficiency. This paper reports on a new approach for compact multi-spectral visible light detecting based on the hexagonal lattice silver nanodisk arrays atop optical cavity substrates. Through numerical calculations and optimizations of experiments, we verified that the narrow band responsivity of the photodetector was caused by coupling the surface plasmonic resonances and cavity mode. The multi-spectral photodetector exhibited that the minimum FWHM and the maximum responsivity of was achieved to be 80 nm and 91.5 mA·W^-1, respectively. Besides, we also analyzed the influence of the proposed structure on the energy wastage by numerical comparison. The proposed way for multi-spectral photodetector is promising to be an excellent design for the narrow band spectral detection. The design can also be easily integrated with CMOS devices and applied to other spectral regimes for different applications.

Near-infrared narrow-band minus filter based on a Mie magnetic dipole resonance

The traditional minus filter is composed of many layers of thin films, which makes it difficult and complicated to manufacture. It is sensitive to incident light angle and polarization. Here, we propose a near-infrared narrow-band minus filter with a full width at half maximum around 5 nm made of all-dielectric Si-SiO₂ structures without any ohmic loss. The stop band transmittance of the proposed filter is close to 0, while its broad pass band transmittance is as high as 90% in the work wavelength range. Theoretical analysis shows that the transmission dip originated from magnetic dipole resonance: Its position can be tuned from 1.3 µm to 1.8 µm by changing the thickness of Si structure, and the proposed structure is insensitive to changes in incident light angle and polarization angle. We further studied its potential applications as a refractive index sensor. The sensitivity of dip1 and dip2 are as high as 953.53 nm/RIU and 691.09 nm/RIU, while their figure of merit is almost unchanged: 59.59 and 115.18, respectively.

Design of structural coloration for full-color high-definition computer-generated holograms

This paper investigates the submicron scale color filter design in the high-definition computer-generated hologram (HD-CGH). It is addressed that single pixel structural coloration is essential for full-color wide-viewing angle HD-CGH because the conventional RGB color stripe filter degrades HD-CGH image quality due to low misalignment tolerance. Considering that a submicron scale slit or hole with metallic mirror sidewalls can operate as a single pixel color filter. We propose a design of single pixel RGB plasmonic color filter (PCF) and present the feasibility of applying the proposed single pixel RGB PCF to high-definition HD-CGHs. Based on the RGB PCF platform, a 1.1 µm × 1.1 µm RGB PCF is designed and the corresponding optical characteristics of the full-color HD-CGH are analyzed.

High-Uniformity Submicron Gratings with Tunable Periods Fabricated through Femtosecond Laser-Assisted Molding Technology for Deformation Detection

As one of the important diffractive optical elements, the submicron gratings on flexible substrates can actively and precisely control the dispersion and steering characteristics of beams and have been widely applied in deformation detection technologies. Herein, we propose a spatially modulated femtosecond laser-assisted molding technology for efficiently fabricating high-uniformity large-area submicron gratings with tunable periods on flexible substrates. The technology first uses a cylindrically focused femtosecond laser-assisted chemical etching method to form a regular submicron grating on silicon; subsequently, the structure is cast with polydimethylsiloxane, a useful flexible substrate with a small Young's modulus, and cured to obtain a high-uniformity large-area submicron grating with a tunable period. The grating exhibits high mechanical stability and sensitivity and favorable optical properties. In the present study, as the deformation of the grating increased from 0 to 10%, the diffraction angle changed by 6.5°. Under illumination by a broad-band white-light source, distinguishable multicolor diffraction patterns were clearly observed. Drawing on this characteristic, we fabricated a deformation sensor. The grating fabricated by using the proposed technology also has potential applications in optical sensors and soft robots.

Structural color printing via polymer-assisted photochemical deposition

Structural color printings have broad applications due to their advantages of long-term sustainability, eco-friendly manufacturing, and ultra-high resolution. However, most of them require costly and time-consuming fabrication processes from nanolithography to vacuum deposition and etching. Here, we demonstrate a new color printing technology based on polymer-assisted photochemical metal deposition (PPD), a room temperature, ambient, and additive manufacturing process without requiring heating, vacuum deposition or etching. The PPD-printed silver films comprise densely aggregated silver nanoparticles filled with a small amount (estimated <20% volume) of polymers, producing a smooth surface (roughness 2.5 nm) even better than vacuum-deposited silver films (roughness 2.8 nm) at ~4 nm thickness. Further, the printed composite films have a much larger effective refractive index n (~1.90) and a smaller extinction coefficient k (~0.92) than PVD ones in the visible wavelength range (400 to 800 nm), therefore modulating the surface reflection and the phase accumulation. The capability of PPD in printing both ultra-thin (~5 nm) composite films and highly reflective thicker film greatly benefit the design and construction of multilayered Fabry-Perot (FP) cavity structures to exhibit vivid and saturated colors. We demonstrated programmed printing of complex pictures of different color schemes at a high spatial resolution of ~6.5 μm by three-dimensionally modulating the top composite film geometries and dielectric spacer thicknesses (75 to 200 nm). Finally, PPD-based color picture printing is demonstrated on a wide range of substrates, including glass, PDMS, and plastic, proving its broad potential in future applications from security labeling to color displays.

Revisiting the Rate-Dependent Mechanical Response of Typical Silicon Structures via Molecular Dynamics

Strain rate is a critical parameter in the mechanical application of nano-devices. A comparative atomistic study on both perfect monocrystalline silicon crystal and silicon nanowire was performed to investigate how the strain rate affects the mechanical response of these silicon structures. Using a rate response model, the strain rate sensitivity and the critical strain rate of two structures were given. The rate-dependent dislocation activities in the fracture process were also discussed, from which the dislocation nucleation and motion were found to play an important role in the low strain rate deformations. Finally, through the comparison of five equivalent stresses, the von Mises stress was verified as a robust yield criterion of the two silicon structures under the strain rate effects.

Manipulation of resonance orders and absorbing materials for structural colors in transmission with improved color purity

We present an improved color purity of additive transmissive structural color filters by controlling a resonance order and by inserting a highly absorbing material. The proposed structure consists of a single metal sandwiched by two transparent dielectric media serving as a cavity to minimize the ohmic loss in the metal mirrors, which is distinctly different from a conventional Fabry-Perot (FP) cavity that is in general designed to have two metal mirrors. Low reflections at an air-dielectric interface cause a quality-factor of a resonance to be reduced, causing a degraded color purity, which can be improved by employing a 1st order resonance that exhibits a narrower bandwidth than a fundamental FP resonant mode (0th order). For a red color with the improved purity, introducing an ultrathin absorbing layer in the middle of a top cavity enables the 1st resonance to be trivially influenced while selectively suppressing a 2nd order resonance appearing at the shorter wavelength region. Moreover, angle-insensitive performances up to 60° are attained by utilizing a cavity material with high index of refraction. Besides, the fabrication of the structural coloring devices involves a few deposition steps, thus rendering the approach suitable for applications over the large area. The described concept could be applied to diverse applications, such as colored solar panels, sensors, imaging devices, and decorations.

Wafer-scale plasmonic metal-dielectric-metal structural color featuring high saturation and low angular dependence

Structural color has been studied through various methods due to its distinguished features of stability, durability, high information storage density and high integration. However, the artificial structural color samples do not exhibit superior performance in color saturation and low angular dependence. Here, we present an approach to acquire additive reflective color based on a metal-dielectric-metal (MDM) stack. The upper layer composed of Ag particles is perforated in a hexagonal arrangement which profits from the dielectric anodic aluminium oxide (AAO) membrane. The size and shape of the Ag particles are getting inhomogeneous as the deposition thickness of the upper layer increasing, which expands the desired absorption range of surface plasmons. The residual non-anodized Al foil serves as a highly reflective substrate for efficient color presenting through the thin-film interference in this plasmonic MDM system. As a result, the color gamut area of this MDM stack is extended 8 times in CIE chromaticity coordinates. Finally, a wafer-scale (diameter of 83 mm) badge of Harbin Engineering University (HEU) with highly saturated colors and a pattern characterized with low angle-dependent property (up to 60°) are presented, which exhibit promising prospects in commercial coloring and imaging.

Metasurface-enabled three-in-one nanoprints by multifunctional manipulations of light

In metasurface-based ultra-compact image display, color-nanoprints, gray-imaging elements, and binary-pattern-imaging elements are three different types of nanoprints, implemented with different mechanisms of light manipulation. Here, we show the three functional elements can be integrated together to form a "three-in-one" nanoprint with negligible crosstalk, merely with a single-cell nanostructured design approach. Specifically, by decoupling spectrum and polarization-assisted intensity manipulations of incident light, the proposed metasurface appears as a dual-color nanoprint under a broadband unpolarized light source illumination, while simultaneously displaying an independent continuous gray image and another binary-pattern in an orthogonal-polarization optical setup with different polarization controls. Our approach can increase the system integration and security of metasurfaces, which can be of interest to many advanced applications such as data storage, optical information encoding, high-end optical anti-counterfeiting, and optical information hiding.

Plasmonic color filter array based visible light spectroscopy

Compared with traditional Fabry-Perot optical filters, plasmonic color filters could greatly remedy the complexity and reduce the cost of manufacturing. In this paper we present end-to-end demonstration of visible light spectroscopy based on highly selective plasmonic color filter array based on resonant grating structure. The spectra of 6 assorted samples were measured using an array of 20 narrowband color filters and detected signals were used to reconstruct original spectra by using new unmixing algorithm and by solving least squares problem with smoothing regularization. The original spectra were reconstructed with less than 0.137 root mean squared error. This works shows promise towards fully integrating plasmonic color filter array in imagers used in hyperspectral cameras.