Regulating proton-coupled electron transfer for efficient water splitting by manganese oxides at neutral pH

Promoting Oxygen Evolution Electrocatalysis by Coordination Engineering in Cobalt Phosphate

Understanding the structure-activity correlation is an important prerequisite for the rational design of high-efficiency electrocatalysts at the atomic level. However, the effect of coordination environment on electrocatalytic oxygen evolution reaction (OER) remains enigmatic. In this work, the regulation of proton transfer involved in water oxidation by coordination engineering based on Co3(PO4)2 and CoHPO4 is reported. The HPO4 2- anion has intermediate pKa value between Co(II)-H2O and Co(III)-H2O to be served as an appealing proton-coupled electron transfer (PCET) induction group. From theoretical calculations, the pH-dependent OER properties, deuterium kinetic isotope effects, operando electrochemical impedance spectroscopy (EIS) and Raman studies, the CoHPO4 catalyst beneficially reduces the energy barrier of proton hopping and modulates the formation energy of high-valent Co species, thereby enhancing OER activity. This work demonstrates a promising strategy that involves tuning the local coordination environment to optimize PCET steps and electrocatalytic activities for electrochemical applications. In addition, the designed system offers a motif to understand the structure-efficiency relationship from those amino-acid residue with proton buffer ability in natural photosynthesis.

Unleashing the room temperature boronization: Blooming of Ni-ZIF nanobuds for efficient photo/electro catalysis of water

Water splitting provides an environmental-friendly and sustainable approach for generating hydrogen fuel. The inherent energetic barrier in two-core half reactions such as the Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER) leads to undesired increased overpotential and constrained reaction kinetics. These challenges pose significant challenges that demand innovative solutions to overcome. One of the efficient ways to address this issue is tailoring the morphology and crystal structure of metal-organic frameworks (MOF). Nickel Zeolite Imidazolate Framework (Ni-ZIF) is a popular MOF and it can be tailored using facile chemical methods to unleash a remarkable bifunctional electro/photo catalyst. This innovative solution holds the capability to address prevailing obstacles such as inadequate electrical conductivity and limited access to active metal centers due to the influence of organic ligands. Thereby, applying boronization to the Ni-ZIF under different duration, one can induce blooming of nanobuds under room temperature and modify oxygen vacancies in order to achieve higher reaction kinetics in electro/photo catalysis. It can be evidenced by the 24-h boronized Ni-ZIF (BNZ), exhibiting lower overpotentials as electrocatalyst (OER-396 mV & HER-174 mV @ 20 mA/cm2) in 1 M KOH electrolyte and augmented gas evolution rates when employed as a photocatalyst (Hydrogen-14.37 μmol g-1min-1 & Oxygen-7.40 μmol g-1min-1). The 24-h boronization is identified as the optimum stage of crystalline to amorphous transformation which provided crystalline/amorphous boundaries as portrayed by X-Ray diffraction (XRD) and High Resolution-Transmission Electron Microscopy (HR-TEM) analysis. The flower-like transformation of 24-BNZ, characterized by crystalline-amorphous boundaries initiates with partial disruption of Ni-N bonds and formation of Ni-B bonds as evident from X-ray Photoelectron Spectroscopy (XPS). Further, the 24-h BNZ exhibit bifunctional catalytic activities with pre-longed stability. Overall, this work presents a comprehensive study of the electrocatalytic and photocatalytic water splitting properties of the tailored Ni-ZIF material.

ZundEig: The Structure of the Proton in Liquid Water from Unsupervised Learning

The structure of the excess proton in liquid water has been the subject of lively debate on both experimental and theoretical fronts for the last century. Fluctuations of the proton are typically interpreted in terms of limiting states referred to as the Eigen and Zundel species. Here, we put these ideas under the microscope, taking advantage of recent advances in unsupervised learning that use local atomic descriptors to characterize environments of acidic water combined with advanced clustering techniques. Our agnostic approach leads to the observation of only one charged cluster and two neutral ones. We demonstrate that the charged cluster involving the excess proton is best seen as an ionic topological defect in water's hydrogen bond network, forming a single local minimum on the global free-energy landscape. This charged defect is a highly fluxional moiety, where the idealized Eigen and Zundel species are neither limiting configurations nor distinct thermodynamic states. Instead, the ionic defect enhances the presence of neutral water defects through strong interactions with the network. We dub the combination of the charged and neutral defect clusters as ZundEig, demonstrating that the fluctuations between these local environments provide a general framework for rationalizing more descriptive notions of the proton in the existing literature.

Proton-donating and chemistry-dependent buffering capability of amino acids for the hydrogen evolution reaction

The hydrogen evolution reaction (HER) has been widely demonstrated to have a strong dependence on pH and on the source of protons, where a clear kinetic advantage arises in acidic conditions over near-neutral and alkaline conditions due to the switch in reactant from H₃O⁺ to H₂O. Playing on the acid/base chemistry of aqueous systems can avoid the kinetic frailties. For example, buffer systems can be used to maintain proton concentration at intermediate pH, driving H₃O⁺ reduction over H₂O. In light of this, we examine the influence of amino acids on HER kinetics at platinum surfaces using rotating disk electrodes. We demonstrate that aspartic acid (Asp) and glutamic acid (Glu) can act not only as proton donors, but also have sufficient buffering action to sustain H₃O⁺ reduction even at large current density. Comparing with histidine (His) and serine (Ser), we reveal that the buffering capacity of amino acids occurs due to the proximity of their isoelectric point (pI) and their buffering pK_a. This study further exemplifies HER's dependence on pH and pK_a and that amino acids can be used to probe this relationship.

High Current Density Oxygen Evolution in Carbonate Buffered Solution Achieved by Active Site Densification and Electrolyte Engineering

High current density reaching 1 A cm^-2 for efficient oxygen evolution reaction (OER) was demonstrated by interactively optimizing electrolyte and electrode at non-extreme pH levels. Careful electrolyte assessment revealed that the state-of-the-art nickel-iron oxide electrocatalyst in alkaline solution maintained its high OER performance with a small Tafel slope in K-carbonate solution at pH 10.5 at 353 K. The OER performance was improved when Cu or Au was introduced into the FeO_x -modified nanostructured Ni electrode as the third element during the preparation of electrode by electrodeposition. The resultant OER achieved 1 A cm^-2 at 1.53 V vs. reversible hydrogen electrode (RHE) stably for 90 h, comparable to those in extreme alkaline conditions. Constant Tafel slopes, apparent activation energy, and the same signatures from operando X-ray absorption spectroscopy among these samples suggested that this improvement seems solely correlated with enhanced electrochemical surface area caused by adding the third element.

Lignin peroxidase-catalyzed direct oxidation of trace organic pollutants through a long-range electron transfer mechanism: Using propranolol as an example

In this work, lignin peroxidase (LiP) was extracted for the in vitro degradation of a persistent compound (propranolol, PPN). The results showed that 94.2% of PPN was degraded at 30 U L^-1 LiP activity and 10 mg L^-1 PPN. The PPN degradation rate increased from 33.5% to 94.2% when the veratryl alcohol (VA) concentration varied from 0 to 180 µM, but decreased to 73.1% with further VA addition. This phenomenon confirmed that VA was indispensable, however, it also acted as a competitive inhibitor of PPN oxidation. Computational analysis revealed that the Trp171…iron porphyrin (TRP-FeP) path was responsible for specific substrate (e.g., VA) transformation, and another long-range electron transfer (LRET) path through His-Asp…FeP (HSP-FeP) was discovered for non-specific substrate (e.g., PPN) degradation. These two electron-transfer routes shared one catalytic center, and VA protected the enzyme from H₂O₂-dependent inactivation. The HSP-FeP path transformed PPN through single electron transfer or H abstraction mechanisms. In addition, hydroxyl radicals generated in the LiP/H₂O₂ system were involved in the hydroxylation of the PPN intermediates. Possible degradation pathways were deduced using these degradation mechanisms and mass-spectrometry analysis. The multipath degradation mechanism endowed LiP with a remarkable capacity for removing various recalcitrant pollutants in environmental remediation.

Formation of the Metastable MnIII Water Oxidation Intermediate in Birnessite is Controlled by a Dissolution-Deposition Process Involving Labile MnII

Birnessite, the closest naturally occurring analog of the Mn₄ CaO₅ cluster of photosystem II, is an important model compound in the development of bio-inspired electrocatalysts for the water oxidation reaction. The present work reports the formation mechanism of the key Mn^III intermediate realized through the study of the effects of several electrolyte anions and cations on the catalytic efficiency of birnessite. In situ spectroelectrochemical measurements show that the activity is controlled by a dynamic dissolution-oxidation process, wherein Mn^III is formed through the oxidation of labile uncomplexed Mn^II that reversibly shuttles between the birnessite and the electrolyte in a manner similar to the photoactivation in photosystem II. The role of electrolyte cations of different ionic radii and hydration strengths is to control the interlayer spacing, whereas electrolyte anions control the extent of deprotonation of complexed Mn^II in the lattice. Both in turn govern the shuttling efficiency of uncomplexed Mn^II and its subsequent electro-oxidation to Mn^III .

Phytate Coordination-Enhanced Electrocatalytic Activity of Copper for Nitroarene Hydrogenation through Concerted Proton-Coupled Electron Transfer

Coupling acid-electrolyte proton exchange membrane fuel cells for electricity generation and cathodic hydrogenation for valuable chemical production shows great potential in energy and chemical industry. The key for this promising approach is the identification of cathode electrocatalysts with acid resistance, high activity, and low fabrication cost for practical applications. Among various promising cathodic candidates for this integrative approach, the easily available and cheap Cu suffers from low acidic hydrogenation activity due to kinetically arduous proton adsorption/activation. Inspired by the kinetic advantages of the concerted proton-coupled electron transfer (CPET) over the sequential proton-electron transfer process, herein, we use phytate coordination on Cu surface to overcome the kinetic bottleneck for proton adsorption/activation through the CPET pathway in an acidic half-cell setup; this leads to 1 order of magnitude activity enhancement (36.94-fold) for nitrobenzene hydrogenation. Mechanistic analysis confirms that phytate, as proton acceptor, induces the CPET process and overcomes the above kinetic limitations by tuning the d-band center and concentrating protons on the Cu surface. Consequently, the CPET process facilitates the formation of active hydrogen intermediates for efficient cathodic hydrogenation. This work provides a promising approach to integrate electricity generation and chemical production.

Engineered Nanoconfinement Accelerating Spontaneous Manganese-Catalyzed Degradation of Organic Contaminants

Manganese(III/IV) oxide minerals are known to spontaneously degrade organic pollutants in nature. However, the kinetics are too slow to be useful for engineered water treatment processes. Herein, we demonstrate that nanoscale Mn₃O₄ particles under nanoscale spatial confinement (down to 3-5 nm) can significantly accelerate the kinetics of pollutant degradation, nearly 3 orders of magnitude faster compared to the same reaction in the unconfined bulk phase. We first employed an anodized aluminum oxide scaffold with uniform channel dimensions for experimental and computational studies. We found that the observed kinetic enhancement resulted from the increased surface area of catalysts exposed to the reaction, as well as the increased local proton concentration at the Mn₃O₄ surface and subsequent acceleration of acid-catalyzed reactions even at neutral pH in bulk. We further demonstrate that a reactive Mn₃O₄-functionalized ceramic ultrafiltration membrane, a more suitable scaffold for realistic water treatment, achieved nearly complete removal of various phenolic and aniline pollutants, operated under a common ultrafiltration water flux. Our findings mark an important advance toward the development of catalytic membranes that can degrade pollutants in addition to their intrinsic function as a physical separation barrier, especially since they are based on accelerating natural catalytic pathways that do not require any chemical addition.

The electron-transfer intermediates of the oxygen evolution reaction (OER) as polarons by in situ spectroscopy

The conversion of diffusive forms of energy (electrical and light) into short, compact chemical bonds by catalytic reactions regularly involves moving a carrier from an environment that favors delocalization to one that favors localization. While delocalization lowers the energy of the carrier through its kinetic energy, localization creates a polarization around the carrier that traps it in a potential energy minimum. The trapped carrier and its local distortion-termed a polaron in solids-can play a role as a highly reactive intermediate within energy-storing catalytic reactions but is rarely discussed as such. Here, we present this perspective of the polaron as a catalytic intermediate through recent in situ and time-resolved spectroscopic investigations of photo-triggered electrochemical reactions at material surfaces. The focus is on hole-trapping at metal-oxygen bonds, denoted M-OH*, in the context of the oxygen evolution reaction (OER) from water. The potential energy surface for the hole-polaron defines the structural distortions from the periodic lattice and the resulting "active" site of catalysis. This perspective will highlight how current and future time-resolved, multi-modal probes can use spectroscopic signatures of M-OH* polarons to obtain kinetic and structural information on the individual reaction steps of OER. A particular motivation is to provide the background needed for eventually relating this information to relevant catalytic descriptors by free energies. Finally, the formation of the O-O chemical bond from the consumption of M-OH*, required to release O₂ and store energy in H₂, will be discussed as the next target for experimental investigations.

Manganese peroxidase mediated oxidation of sulfamethoxazole: Integrating the computational analysis to reveal the reaction kinetics, mechanistic insights, and oxidation pathway

In this study, manganese peroxidase (MnP) was applied to induce the in vitro oxidation of sulfamethoxazole (SMX). The results indicated that 87.04% of the SMX was transformed and followed first-order kinetics (k_obs=0.438 h^-1) within 6 h when 40 U L^-1 of MnP was added. The reaction kinetics were investigated under different conditions, including pH, MnP activity, and H₂O₂ concentration. The active species Mn³⁺ was responsible for the oxidation of SMX, and the Mn³⁺ production rate was monitored to reveal the interaction among MnP, Mn³⁺, and SMX. By integrating the characterizations analysis of the MnP/H₂O₂ system with the density functional theory (DFT) calculations, the proton-coupled electron transfer (PCET) process dominated the catalytic circle of MnP and the transformation of Mn³⁺. Additionally, possible oxidation pathways of SMX were proposed based on single-electron transfer mechanism, which primarily included the S-N bond cleavage, the C-S bond cleavage, and one electron loss without bond breakage. It was then transformed to hydrolysis, N-H oxidation, self-coupling, and carboxylic acid coupling products. This study provides insights into the atomic-level mechanism of MnP and the transformation pathways of sulfamethoxazole, which lays a significant foundation for the potential of MnP in wastewater treatment applications.

Recent progress in water-splitting electrocatalysis mediated by 2D noble metal materials

Two-dimensional (2D) nanostructures have enabled noble-metal-based nanomaterials to be promising electrocatalysts toward overall water splitting due to their inherent structural advantages, including a high specific surface active area, numerous low-coordinated atoms, and a high density of defects and edges. Moreover, it is also disclosed that the electronic effect and strain effect within 2D nanostructures also benefit the further promotion of the electrocatalytic performance. In this review, we have focused on the recent progress in the fabrication of advanced electrocatalysts based on 2D noble-metal-based nanomaterials toward water splitting electrocatalysis. First, fundamental descriptions about water-splitting mechanisms, some promising engineering strategies, and major challenges in electrochemical water splitting are given. Then, the structural merits of 2D nanostructures for water splitting electrocatalysis are also highlighted, including abundant surface active sites, lattice distortion, abundant surface defects, electronic effects, and strain effects. Additionally, some representative water-splitting electrocatalysts have been discussed in detail to highlight the superiorities of 2D noble-metal-based nanomaterials for electrochemical water splitting. Finally, the underlying challenges and future opportunities for the fabrication of more advanced electrocatalysts for water splitting are also highlighted. We hope that this review article provides guidance for the fabrication of more efficient electrocatalysts for boosting industrial hydrogen production via water splitting.

Tuning of lattice oxygen reactivity and scaling relation to construct better oxygen evolution electrocatalyst

Developing efficient and low-cost electrocatalysts for oxygen evolution reaction is crucial in realizing practical energy systems for sustainable fuel production and energy storage from renewable energy sources. However, the inherent linear scaling relation for most catalytic materials imposes a theoretical overpotential ceiling, limiting the development of efficient electrocatalysts. Herein, using modeled Na_xMn₃O₇ materials, we report an effective strategy to construct better oxygen evolution electrocatalyst through tuning both lattice oxygen reactivity and scaling relation via alkali metal ion mediation. Specifically, the number of Na⁺ is linked with lattice oxygen reactivity, which is determined by the number of oxygen hole in oxygen lone-pair states formed by native Mn vacancies, governing the barrier symmetry between O–H bond cleavage and O–O bond formation. On the other hand, the presence of Na⁺ could have specific noncovalent interaction with pendant oxygen in *OOH to overcome the limitation from linear scaling relation, reducing the overpotential ceiling. Combining in situ spectroscopy-based characterization with first-principles calculations, we demonstrate that an intermediate level of Na⁺ mediation (NaMn₃O₇) exhibits the optimum oxygen evolution activity. This work provides a new rational recipe to develop highly efficient catalyst towards water oxidation or other oxidative reactions through tuning lattice oxygen reactivity and scaling relation.

While water-splitting provides a renewable means to generate fuel, the water-oxidation half-reaction is considered a bottleneck process. Here, authors tune lattice oxygen reactivity and scaling relations via alkali metal ion mediation in NaMn₃O₇ for oxygen evolution electrocatalysis.

Water-Assisted Concerted Proton-Electron Transfer at Co(II)-Aquo Sites in Polyoxotungstates With Photogenerated RuIII (bpy)33+ Oxidant

The cobalt substituted polyoxotungstate [Co6 (H2 O)2 (α-B-PW9 O34 )2 (PW6 O26 )]17- (Co6) displays fast electron transfer (ET) kinetics to photogenerated RuIII (bpy)33+ , 4 to 5 orders of magnitude faster than the corresponding ET observed for cobalt oxide nanoparticles. Mechanistic evidence has been acquired indicating that: (i) the one-electron oxidation of Co6 involves Co(II) aquo or Co(II) hydroxo groups (abbreviated as Co6(II)-OH2 and Co6(II)-OH, respectively, whose speciation in aqueous solution is associated to a pKa of 7.6), and generates a Co(III)-OH moiety (Co6(III)-OH), as proven by transient absorption spectroscopy; (ii) at pH>pKa , the Co6(II)-OH→RuIII (bpy)33+ ET occurs via bimolecular kinetics, with a rate constant k close to the diffusion limit and dependent on the ionic strength of the medium, consistent with reaction between charged species; (iii) at pH Collapse

Key Words

• Co-aquo moiety
• cobalt polyoxometalate
• flash photolysis
• hydrogen bonding
• proton coupled electron transfer

Collapse

MESH Headings

• Cobalt/chemistry
• Coordination Complexes/chemical synthesis
• Coordination Complexes/chemistry
• Electrons
• Kinetics
• Light
• Organometallic Compounds/chemistry
• Organometallic Compounds/radiation effects
• Oxidants/chemistry
• Oxidants/radiation effects
• Oxidation-Reduction
• Polymers/chemical synthesis
• Polymers/chemistry
• Protons
• Ruthenium/chemistry
• Ruthenium/radiation effects
• Tungsten Compounds/chemical synthesis
• Tungsten Compounds/chemistry
• Water/chemistry

Collapse

Grants

• Fondazione Cariparo
• 10BIRD2018-UNIPD Department of Chemical Sciences at University of Padova
• 2017PBXPN4 Department of Chemical Sciences at University of Padova
• FAR 2020 University of Ferrara
• Fondazione Cariparo
• University of Ferrara

Collapse

Affiliation(s)

Francesco Rigodanza Department of Chemical SciencesUniversity of Padovavia Marzolo 135131PadovaItaly Consiglio Nazionale delle Ricerche (C.N.R.)Institute on Membrane Technology section of Padovavia Marzolo 135131PadovaItaly
Nadia Marino Department of Chemistry and Chemical TechnologiesUniversity of Calabria87036Arcavacata di Rende (CS)Italy
Alessandro Bonetto Dept. Environmental Sciences, Informatics and StatisticsUniversity Ca' Foscari Venice VegaparkVia delle Industrie 21/830175Marghera, VeniceItaly
Antonio Marcomini Dept. Environmental Sciences, Informatics and StatisticsUniversity Ca' Foscari Venice VegaparkVia delle Industrie 21/830175Marghera, VeniceItaly
Marcella Bonchio Department of Chemical SciencesUniversity of Padovavia Marzolo 135131PadovaItaly Consiglio Nazionale delle Ricerche (C.N.R.)Institute on Membrane Technology section of Padovavia Marzolo 135131PadovaItaly
Mirco Natali Department of Chemical, Pharmaceutical and Agricultural Sciences (DOCPAS)University of Ferrara, and Centro Interuniversitario per la Conversione Chimica dell'Energia Solare (SOLARCHEM) sez. di Ferraravia L. Borsari 4644121FerraraItaly
Andrea Sartorel Department of Chemical SciencesUniversity of Padovavia Marzolo 135131PadovaItaly

Collapse

Delivering the Full Potential of Oxygen Evolving Electrocatalyst by Conditioning Electrolytes at Near-Neutral pH

This study reports on the impact of identity and compositions of buffer ions on oxygen evolution reaction (OER) performance at a wide range of pH levels using a model IrOx electrocatalyst. Rigorous microkinetic analysis employing kinetic isotope effects, Tafel analysis, and temperature dependence measurement was conducted to establish rate expression isolated from the diffusion contribution of buffer ions and solution resistance. It was found that the OER kinetics was facile with OH- oxidation compared to H2 O, the results of which were highlighted by mitigating over 200 mV overpotential in the presence of buffer to reach 10 mA cm-2 . This improvement was ascribed to the involvement of the kinetics of the local OH- supply by the buffering action. Further digesting the kinetic data at various buffer pKa and the solution bulk pH disclosed a trade-off between the exchange current density and the Tafel slope, indicating that the optimal electrolyte condition can be chosen at a different range of current density. This study provides a quantitative guideline for electrolyte engineering to maximize the intrinsic OER performance that electrocatalyst possesses especially at near-neutral pH.

Toward Quantum Computing for High-Energy Excited States in Molecular Systems: Quantum Phase Estimations of Core-Level States

This paper explores the utility of the quantum phase estimation (QPE) algorithm in calculating high-energy excited states characterized by the promotion of electrons occupying core-level shells. These states have been intensively studied over the last few decades, especially in supporting the experimental effort at light sources. Results obtained with QPE are compared with various high-accuracy many-body techniques developed to describe core-level states. The feasibility of the quantum phase estimator in identifying classes of challenging shake-up states characterized by the presence of higher-order excitation effects is discussed. We also demonstrate the utility of the QPE algorithm in targeting excitations from specific centers in a molecule. Lastly, we discuss how the lowest-order Trotter formula can be applied to reducing the complexity of the ansatz without affecting the error.

Constructing NiSe2@MoS2 nano-heterostructures on a carbon fiber paper for electrocatalytic oxygen evolution

Although MoS₂ has shown its potential as an electro-catalyst for the oxygen evolution reaction (OER), its research is still insufficient. In this study, as a novel MoS₂-based heterostructure electro-catalyst for OER, namely NiSe₂@MoS₂ nano-heterostructure, was constructed on a carbon fiber paper (CFP) substrate by a simple approach, which includes electrochemical deposition of NiSe₂ film and hydrothermal processing of MoS₂ film. In addition to a series of observations on the material structure, electrocatalytic OER performance of NiSe₂@MoS₂ was fully evaluated and further compared with other MoS₂-based OER electro-catalysts. It exhibits an outstanding catalytic performance with an overpotential η₁₀ of 267 mV and a Tafel slope of 85 mV dec⁻¹. Only 6% loss of current density before and after 10 h indicates its excellent durability. The results indicate that the obtained NiSe₂@MoS₂ is an excellent OER electro-catalyst and worth exploring as a substitute for noble metal-based materials.

Although MoS₂ has shown its potential as an electro-catalyst for the oxygen evolution reaction (OER), its research is still insufficient.

Molecular Functionalization of NiO Nanocatalyst for Enhanced Water Oxidation by Electronic Structure Engineering

Tuning the local environment of nanomaterial-based catalysts has emerged as an effective approach to optimize their oxygen evolution reaction (OER) performance, yet the controlled electronic modulation around surface active sites remains a great challenge. Herein, directed electronic modulation of NiO nanoparticles was achieved by simple surface molecular modification with small organic molecules. By adjusting the electronic properties of modifying molecules, the local electronic structure was rationally tailored and a close electronic structure-activity relationship was discovered: the increasing electron-withdrawing modification readily decreased the electron density around surface Ni sites, accelerating the reaction kinetics and improving OER activity, and vice versa. Detailed investigation by operando Raman spectroelectrochemistry revealed that the electron-withdrawing modification facilitates the charge-transfer kinetics, stimulates the catalyst reconstruction, and promotes abundant high-valent γ-NiOOH reactive species generation. The NiO-C6 F5 catalyst, with the optimized electronic environment, exhibited superior performance towards water oxidation. This work provides a well-designed and effective approach for heterogeneous catalyst fabrication under the molecular level.

In Situ Synthesis of Manganese Oxide as an Oxygen-Evolving Catalyst: A New Strategy

All studies on oxygen-evolution reaction by Mn oxides in the presence of cerium(IV) ammonium nitrate (CAN) have been so far carried out by synthesizing Mn oxides in the first step. And then, followed by the investigation of the Mn oxides in the presence of oxidants for oxygen-evolution reaction (OER). This paper presents a case study of a new and promising strategy for in situ catalyst synthesis by the adding Mn^II to either CAN or KMnO₄ /CAN solution, resulting in the formation of Mn-based catalysts for OER. The catalysts were characterized by scanning electron microscopy, energy-dispersive spectroscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy. Both compounds contained nano-sized particles that catalyzed OER in the presence of CAN. The turnover frequencies for both catalysts were 0.02 (mmol O 2 /mol_Mn ⋅s).

Trimetallic MOF-74 Films Grown on Ni Foam as Bifunctional Electrocatalysts for Overall Water Splitting

Developing earth-abundant and high-performance electrocatalysts for water splitting has long been a vital research in energy conversion field. Herein, we report the preparation of a series of trimetallic uniform Mn_x Fe_y Ni-MOF-74 films in-situ grown on nickel foam, which can be utilized as bifunctional electrocatalysts towards overall water splitting in alkaline media. The introduction of Mn can simultaneously regulate the morphology of MOF-74 to form uniform film and modulate electronic structure of Fe to form more Fe(II)-O-Fe(III) motifs, which is conducive to the exposure of active sites and stabilizing high-valent metal sites. The optimized Mn_0.52 Fe_0.71 Ni-MOF-74 film electrode showed excellent electrocatalytic performance, affording a current density of 10 mA ⋅ cm^-2 at an overpotential of 99 mV for HER and 100 mA ⋅ cm^-2 at an overpotential of 267 mV for OER, respectively. Assembled as an electrolyser, Mn_0.52 Fe_0.71 Ni-MOF-74 film electrode exhibited excellent performance towards overall water splitting, with ultralow overpotential of 245 and 462 mV to achieve current density of 10 and 100 mA ⋅ cm^-2 , respectively. This work provides a new view to develop multi-metal MOF-based electrocatalysts.

Tuning proton-coupled electron transfer by crystal orientation for efficient water oxidization on double perovskite oxides

Developing highly efficient and cost-effective oxygen evolution reaction (OER) electrocatalysts is critical for many energy devices. While regulating the proton-coupled electron transfer (PCET) process via introducing additive into the system has been reported effective in promoting OER activity, controlling the PCET process by tuning the intrinsic material properties remains a challenging task. In this work, we take double perovskite oxide PrBa_0.5Sr_0.5Co_1.5Fe_0.5O_5+δ (PBSCF) as a model system to demonstrate enhancing OER activity through the promotion of PCET by tuning the crystal orientation and correlated proton diffusion. OER kinetics on PBSCF thin films with (100), (110), and (111) orientation, deposited on single crystal LaAlO₃ substrates, were investigated using electrochemical measurements, density functional theory (DFT) calculations, and synchrotron-based near ambient X-ray photoelectron spectroscopy. The results clearly show that the OER activity and the ease of deprotonation depend on orientation and follow the order of (100) > (110) > (111). Correlated with OER activity, proton diffusion is found to be the fastest in the (100) film, followed by (110) and (111) films. Our results point out a way of boosting PCET and OER activity, which can also be successfully applied to a wide range of crucial applications in green energy and environment.

Boosting Neutral Water Oxidation through Surface Oxygen Modulation

Developing efficient electrocatalysts for oxygen evolution reaction (OER) in pH-neutral electrolyte is crucial for microbial electrolysis cells and electrochemical CO₂ reduction. Unfortunately, the OER kinetics in neutral electrolyte is sluggish due to the low concentration of adsorbed reactants, with overpotentials of neutral OER at present much higher than that in acidic or alkaline electrolyte. Here, hydrated metal cations (Ca²⁺ ) are sought to be incorporated into the state-of-the-art Ru-Ir binary oxide to tailor the surface oxygen environments (lattice-oxygen and adsorbed oxygen species) for efficient neutral OER. Using a sol-gel method, ternary Ru-Ir-Ca oxides are synthesized in atomically homogenous manner, and the obtained catalyst on glassy carbon electrode achieves 10 mA cm^-2 at a low overpotential of 250 mV, with no degradation for 200 h of operation. In situ X-ray absorption spectroscopy, in situ ¹⁸ O isotope-labeling differential electrochemical mass spectrometry, and ¹⁸ O isotope-labeling secondary ion mass spectroscopy studies are carried out. The results reveal that incorporation of Ca²⁺ can enhance the covalency of metal-oxygen bonds and the electrophilic nature of surface metal-bonded oxygen sites; and simultaneously facilitate the adsorption of water molecules on catalyst surface, which accelerates the lattice-oxygen-involved reaction, thus improving the overall OER performance of RuIrCaO_x catalyst.

Enhanced stability and ultrahigh activity of amorphous ripple nanostructured Ni-doped Fe oxyhydroxide electrode toward synergetic electrocatalytic water splitting

The development of high-performance catalysts for oxygen-evolution reaction (OER) is paramount for cost-effective conversion of renewable electricity to fuels and chemicals. Here we report, highly efficient, ultra-durable and earth-abundant Ni@Fe-NP electrocatalysts developed by solvothermal method for oxygen evolution reaction (OER). The newly developed oxygen electrode show prolonged stability and high catalytic-activity in line with water oxidation keeping alkaline condition which requires overpotential of only 211 mV at current density of 10 mA cm⁻². Collectively, the as-prepared amorphous Ni@Fe-NP rippled nanostructured electrode is the most effective oxygen evolution electrode in alkaline solution. Therefore, this study will offer exciting new avenues for designing self-supported electrode materials towards water splitting and other applications.

The development of high-performance catalysts for oxygen-evolution reaction (OER) is paramount for cost-effective conversion of renewable electricity to fuels and chemicals.

In situ interfacial engineering of nickel tungsten carbide Janus structures for highly efficient overall water splitting

Regulating chemical bonds to balance the adsorption and disassociation of water molecules on catalyst surfaces is crucial for overall water splitting in alkaline solution. Here we report a facile strategy for designing Ni₂W₄C-W₃C Janus structures with abundant Ni-W metallic bonds on surfaces through interfacial engineering. Inserting Ni atoms into the W₃C crystals in reaction progress generates a new Ni₂W₄C phase, making the inert W atoms in W₃C be active sites in Ni₂W₄C for overall water splitting. The Ni₂W₄C-W₃C/carbon nanofibers (Ni₂W₄C-W₃C/CNFs) require overpotentials of 63 mV to reach 10 mA cm^-2 for hydrogen evolution reaction (HER) and 270 mV to reach 30 mA cm^-2 for oxygen evolution reaction (OER) in alkaline electrolyte, respectively. When utilized as both cathode and anode in alkaline solution for overall water splitting, cell voltages of 1.55 and 1.87 V are needed to reach 10 and 100 mA cm^-2, respectively. Density functional theory (DFT) results indicate that the strong interactions between Ni and W increase the local electronic states of W atoms. The Ni₂W₄C provides active sites for cleaving H-OH bonds, and the W₃C facilitates the combination of H_ads intermediates into H₂ molecules. The in situ electrochemical-Raman results demonstrate that the strong absorption ability for hydroxyl and water molecules and further demonstrate that W atoms are the real active sites.

Hydration-Effect-Promoting Ni-Fe Oxyhydroxide Catalysts for Neutral Water Oxidation

Oxygen evolution reaction (OER) catalysts that function efficiently in pH-neutral electrolyte are of interest for biohybrid fuel and chemical production. The low concentration of reactant in neutral electrolyte mandates that OER catalysts provide both the water adsorption and dissociation steps. Here it is shown, using density functional theory simulations, that the addition of hydrated metal cations into a Ni-Fe framework contributes water adsorption functionality proximate to the active sites. Hydration-effect-promoting (HEP) metal cations such as Mg²⁺ and hydration-effect-limiting Ba²⁺ into Ni-Fe frameworks using a room-temperature sol-gel process are incorporated. The Ni-Fe-Mg catalysts exhibit an overpotential of 310 mV at 10 mA cm^-2 in pH-neutral electrolytes and thus outperform iridium oxide (IrO₂ ) electrocatalyst by a margin of 40 mV. The catalysts are stable over 900 h of continuous operation. Experimental studies and computational simulations reveal that HEP catalysts favor the molecular adsorption of water and its dissociation in pH-neutral electrolyte, indicating a strategy to enhance OER catalytic activity.

Water-Oxidation Electrocatalysis by Manganese Oxides: Syntheses, Electrode Preparations, Electrolytes and Two Fundamental Questions

The efficient catalysis of the four-electron oxidation of water to molecular oxygen is a central challenge for the development of devices for the production of solar fuels. This is equally true for artificial leaf-type structures and electrolyzer systems. Inspired by the oxygen evolving complex of Photosystem II, the biological catalyst for this reaction, scientists around the globe have investigated the possibility to use manganese oxides (“MnOx”) for this task. This perspective article will look at selected examples from the last about 10 years of research in this field. At first, three aspects are addressed in detail which have emerged as crucial for the development of efficient electrocatalysts for the anodic oxygen evolution reaction (OER): (1) the structure and composition of the “MnOx” is of central importance for catalytic performance and it seems that amorphous, MnIII/IV oxides with layered or tunnelled structures are especially good choices; (2) the type of support material (e.g. conducting oxides or nanostructured carbon) as well as the methods used to immobilize the MnOx catalysts on them greatly influence OER overpotentials, current densities and long-term stabilities of the electrodes and (3) when operating MnOx-based water-oxidizing anodes in electrolyzers, it has often been observed that the electrocatalytic performance is also largely dependent on the electrolyte’s composition and pH and that a number of equilibria accompany the catalytic process, resulting in “adaptive changes” of the MnOx material over time. Overall, it thus has become clear over the last years that efficient and stable water-oxidation electrolysis by manganese oxides can only be achieved if at least four parameters are optimized in combination: the oxide catalyst itself, the immobilization method, the catalyst support and last but not least the composition of the electrolyte. Furthermore, these parameters are not only important for the electrode optimization process alone but must also be considered if different electrode types are to be compared with each other or with literature values from literature. Because, as without their consideration it is almost impossible to draw the right scientific conclusions. On the other hand, it currently seems unlikely that even carefully optimized MnOx anodes will ever reach the superb OER rates observed for iridium, ruthenium or nickel-iron oxide anodes in acidic or alkaline solutions, respectively. So at the end of the article, two fundamental questions will be addressed: (1) are there technical applications where MnOx materials could actually be the first choice as OER electrocatalysts? and (2) do the results from the last decade of intensive research in this field help to solve a puzzle already formulated in 2008: “Why did nature choose manganese to make oxygen?”.

Hybrid-atom-doped NiMoO4 nanotubes for oxygen evolution reaction

Doping with hybrid atoms can narrow the band gap of NiMoO₄ nanotubes, improving their performance in the oxygen evolution reaction.

Efficient BiVO4 Photoanodes by Postsynthetic Treatment: Remarkable Improvements in Photoelectrochemical Performance from Facile Borate Modification

Water-splitting photoanodes based on semiconductor materials typically require a dopant in the structure and co-catalysts on the surface to overcome the problems of charge recombination and high catalytic barrier. Unlike these conventional strategies, a simple treatment is reported that involves soaking a sample of pristine BiVO4 in a borate buffer solution. This modifies the catalytic local environment of BiVO4 by the introduction of a borate moiety at the molecular level. The self-anchored borate plays the role of a passivator in reducing the surface charge recombination as well as that of a ligand in modifying the catalytic site to facilitate faster water oxidation. The modified BiVO4 photoanode, without typical doping or catalyst modification, achieved a photocurrent density of 3.5 mA cm-2 at 1.23 V and a cathodically shifted onset potential of 250 mV. This work provides an extremely simple method to improve the intrinsic photoelectrochemical performance of BiVO4 photoanodes.

Electrochemical characterization of manganese oxides as a water oxidation catalyst in proton exchange membrane electrolysers

The performance of four polymorphs of manganese (Mn) dioxides as the catalyst for the oxygen evolution reaction (OER) in proton exchange membrane (PEM) electrolysers was examined. The comparison of the activity between Mn oxides/carbon (Mn/C), iridium oxide/carbon (Ir/C) and platinum/carbon (Pt/C) under the same condition in PEM electrolysers showed that the γ-MnO₂/C exhibited a voltage efficiency for water electrolysis comparable to the case with Pt/C, while lower than the case with the benchmark Ir/C OER catalyst. The rapid decrease in the voltage efficiency was observed for a PEM electrolyser with the Mn/C, as indicated by the voltage shift from 1.7 to 1.9 V under the galvanostatic condition. The rapid deactivation was also observed when Pt/C was used, indicating that the instability of PEM electrolysis with Mn/C is probably due to the oxidative decomposition of carbon supports. The OER activity of the four types of Mn oxides was also evaluated at acidic pH in a three-electrode system. It was found that the OER activity trends of the Mn oxides evaluated in an acidic aqueous electrolyte were distinct from those in PEM electrolysers, demonstrating the importance of the evaluation of OER catalysts in a real device condition for future development of noble-metal-free PEM electrolysers.

Epoxidation of Cyclooctene Using Water as the Oxygen Atom Source at Manganese Oxide Electrocatalysts

Epoxides are useful intermediates for the manufacture of a diverse set of chemical products. Current routes of olefin epoxidation either involve hazardous reagents or generate stoichiometric side products, leading to challenges in separation and significant waste streams. Here, we demonstrate a sustainable and safe route to epoxidize olefin substrates using water as the oxygen atom source at room temperature and ambient pressure. Manganese oxide nanoparticles (NPs) are shown to catalyze cyclooctene epoxidation with Faradaic efficiencies above 30%. Isotopic studies and detailed product analysis reveal an overall reaction in which water and cyclooctene are converted to cyclooctene oxide and hydrogen. Electrokinetic studies provide insights into the mechanism of olefin epoxidation, including an approximate first-order dependence on the substrate and water and a rate-determining step which involves the first electron transfer. We demonstrate that this new route can also achieve a cyclooctene conversion of ∼50% over 4 h.

Modulated electrochemical oxygen evolution catalyzed by MoS2 nanoflakes from atomic layer deposition

Electrochemical water splitting into H₂ and O₂ has attracted wide attention owing to the urgent need for clean and renewable energy sources. However, the scarcity and high-cost limit the large-scale application of noble metal catalysts such as IrO₂ and RuO₂. In this work, as a low-cost catalyst for the electrochemical O₂ evolution reaction (OER), MoS₂ nanoflakes were obtained by atomic layer deposition (ALD) using MoCl₅ and H₂S on carbon fiber paper surface. According to the results of electrochemical measurements, the MoS₂ nanoflakes exhibit an excellent catalytic activity, and the activity can be modulated by controlling the density and the internal resistance of MoS₂ nanoflakes. Moreover, the plasma treatment can further improve the activity of MoS₂ nanoflakes, and the reason was discussed through the measurements of contact angle, electrochemical impedance spectroscopy, and electrochemically active surface area. The MoS₂ nanoflakes obtained by ALD possess huge values for electrochemical OER as a catalyst.

Modelling the (Essential) Role of Proton Transport by Electrolyte Bases for Electrochemical Water Oxidation at Near-Neutral pH

The oxygen-evolution reaction (OER) in the near-neutral pH-regime is of high interest, e.g., for coupling of OER and CO2-reduction in the production of non-fossil fuels. A simple model is proposed that assumes equal proton activities in the catalyst film and the near-surface electrolyte. Equations are derived that describe the limitations relating to proton transport mediated by fluxes of molecular “buffer bases” in the electrolyte. The model explains (1) the need for buffer bases in near-neutral OER and (2) the pH dependence of the catalytic current at high overpotentials. The latter is determined by the concentration of unprotonated buffer bases times an effective diffusion constant, which can be estimated for simple cell geometries from tabulated diffusion coefficients. The model predicts (3) a macroscopic region of increased pH close to the OER electrode and at intermediate overpotentials, (4) a Tafel slope that depends on the reciprocal buffer capacity; both predictions are awaiting experimental verification. The suggested first-order model captures and predicts major trends of OER in the near-neutral pH, without accounting for proton-transport limitations at the catalyst–electrolyte interface and within the catalyst material, but the full quantitative agreement may require refinements. The suggested model also may be applicable to further electrocatalytic processes.

Iron phosphate modified calcium iron oxide as an efficient and robust catalyst in electrocatalyzing oxygen evolution from seawater

CaFeO_x modified with electrodeposited FePO₄ exhibits high activity and stability in natural seawater splitting.

Manganese(ii) phosphate nanosheet assembly with native out-of-plane Mn centres for electrocatalytic water oxidation

Nature selects Mn-clusters as catalysts for water oxidation, which is a significant reaction in photosynthesis.

Nature selects Mn-clusters as catalysts for water oxidation, which is a significant reaction in photosynthesis. Thus, it is of critical importance to develop Mn-based superstructures and study their catalytic details for water-splitting-based renewable energy research. Herein, we report a manganese(ii) phosphate nanosheet assembly with asymmetric out-of-plane Mn centers from the transformation of amine-intercalated nanoplates for efficient electrocatalytic water oxidation in neutral aqueous solutions. From structural and computational studies, it is found that the native out-of-plane Mn centers with terminal water ligands are accessible and preferential oxidation sites to form active intermediates for water oxidation. In addition, the asymmetry can stabilize the key Mn^III intermediate, as demonstrated by electrochemical and spectrometric studies. This study delivers a convenient strategy to prepare unique nanosheet assemblies for electrocatalysis and fundamental understandings of oxygen evolution chemistry.

The Sub-Nanometer Scale as a New Focus in Nanoscience

Size is one of the central issues in nanoscience. The practical meaning of the term "sub-nanometric material (SNM)" requires two aspects: (1) its size should be at the atomic level; (2) it shows unique (size-related) properties compared to its nano-counterparts with larger sizes. Here, SNMs in the form of wires (SNWs) and the unique properties arising from their special size are reviewed. First, their polymer-like behavior, including rheological behavior and self-assembly, is dicussed. Their origins may stem from the special size and the ligands around the wire. Even a slight increase in diameter would risk the polymer-like behavior. Meanwhile, the ligands on SNWs are proportional to the inorganic entity at this scale. Consequently, surface ligands should have a profound impact on the properties, like catalysis, self-assembly, optics, etc. To reveal more potential applications, their applications in energy conversion are comprehensively reviewed. To some extent, characterization can greatly influence the way things are observed. Thus, some appropriate characterization techniques are briefly introduced. Finally, another emerging part of SNWs (atomic chain material) is briefly introduced. It is hoped that this review can provide new insights to this special scale.