Fallow time determination in dentistry using aerosol measurement in mechanically and non-mechanically ventilated environments

Reducing microbial airborne contamination and particulate matter using different oral suctions in dental clinic: A randomized controlled clinical trial

Aim

This study aimed to assess oral suction devices in declining microbial airborne contamination level and particulate matter.

Materials and methods

This open-label randomized clinical trial was conducted in an educational hospital with 50 participants above 18 years of age, who had scheduled an appointment at a dental hygienist clinic for scaling procedure. Particulate matter and microbial airborne contamination levels were taken at the beginning for 15 min and during of scaling procedure. Participants were randomized to five groups: low suction, high & low suction, intraoral suction (IOS), extra-oral suction (EOS) & low suction, and IOS & EOS. Repeated measured ANOVA analysis was carried out using STATA version 13.

Results

Participants had aged 34.4 ± 8.1 years and the average simplified oral hygiene index was 3.5 ± 1.2. Microbial airborne contamination level for each intervention group was different to baseline; low suction, intraoral suction, high & low suction, EOS & low suction, and EOS and intraoral suction were 1089 ± 610, 296.3 ± 321.2, 43.8 ± 52.1, 17.3 ± 7.3 and 14.3 ± 3.9, respectively [P value < 0.05]. Particulate matter shows evidence of no significant difference among oral suctions [P value > 0.05].

Conclusion

Low or intraoral suction was not enough to reduce microbial airborne contamination for better infection control, practitioners highly recommended to use combination of suction devices.

Clinical relevance

Using extra-oral with intra-oral suction, or extra-oral suction with low section, or high & low suction are potentially better in microbial airborne contamination reduction compared with low or intraoral suction only.

Trial registration

Clinicaltrials.gov (NCT05848245) on April 14, 2023.

Aerosol-generating procedures and associated control/mitigation measures: Position paper from the Canadian Dental Hygienists Association and the American Dental Hygienists' Association

Background

Since the outbreak of COVID-19, how to reduce the risk of spreading viruses and other microorganisms while performing aerosolgenerating procedures (AGPs) has become a challenging question within the dental and dental hygiene communities. The purpose of this position paper is to summarize the evidence of the effectiveness of various mitigation methods used to reduce the risk of infection transmission during AGPs in dentistry.

Methods

The authors searched 6 databases-MEDLINE, EMBASE, Scopus, Web of Science, Cochrane Library, and Google Scholar-for relevant scientific evidence published between January 2012 and December 2022 to answer 6 research questions about the risk of transmission, methods, devices, and personal protective equipment (PPE) used to reduce contact with microbial pathogens and limit the spread of aerosols.

Results

A total of 78 studies fulfilled the eligibility criteria. The literature on the risk of infection transmission including SARS-CoV-2 between dental hygienists and their patients is limited. Although several mouthrinses are effective in reducing bacterial contaminations in aerosols, their effectiveness against SARS-CoV-2 is also limited. The combined use of eyewear, masks, and face shields is effective in preventing contamination of the facial and nasal region while performing AGPs. High-volume evacuation with or without an intraoral suction, low-volume evacuation, saliva ejector, and rubber dam (when appropriate) have shown effectiveness in reducing aerosol transmission beyond the generation site. Finally, the appropriate combination of ventilation and filtration in dental operatories is effective in limiting the spread of aerosols.

Discussion and Conclusion

Aerosols produced during clinical procedures can pose a risk of infection transmission between dental hygienists and their patients. The implementation of practices supported by available evidence will ensure greater patient and provider safety in oral health settings. More studies in oral health clinical environments would shape future practices and protocols, ultimately to ensure the delivery of safe clinical care.

Study of aerosol dispersion and control in dental practice

OBJECTIVES

In this study, we investigated the dispersion patterns of aerosols and droplets in dental clinics and developed a suction device to evaluate its effectiveness in reducing aerosols during dental procedures.

MATERIALS AND METHODS

Firstly, the continuous images of oral aerosols and droplets were photographed with a high-speed camera, and the trajectories of these particles were recognized and processed by Image J to determine key parameters affecting particle dispersion: diffusion velocity, distance, and angle. Secondly, based on the parameter data, the flow field of aerosol particles around the oral cavity was simulated using computational fluid dynamics (CFD), and the flow field under adsorption conditions was simulated to demonstrate the aerodynamic characteristics and capture efficiencies of the single-channel and three-channel adsorption ports at different pressures. Finally, according to the simulated data, a three-channel suction device was developed, and the capture efficiency of the device was tested by the fluorescein tracer method.

RESULTS

The dispersion experimental data showed that aerosol particles' maximum diffusion velocity, distance, and angle were 6.2 m/s, 0.55 m, and 130°, respectively. The simulated aerosol flow-field distribution was consistent with the aerosol dispersion patterns. The adsorption simulation results showed that the outlet flow rate of single-channel adsorption was 184.5 L/s at - 350 Pa, and the aerosol capture efficiency could reach 79.4%. At - 350 Pa and - 150 Pa, the outlet flow rate of three-channel adsorption was 228.9 L/s, and the capture efficiency was 99.23%. The adsorption experimental data showed that the capture efficiency of three-channel suction device was 97.71%.

CONCLUSIONS

A three-channel suction device was designed by simulations and experiments, which can capture most aerosols in the dental clinic and prevent them from spreading.

CLINICAL RELEVANCE

Using three-channel suction devices during oral treatment effectively reduces the spread of oral aerosols, which is essential to prevent the spread of epidemics and ensure the health and safety of patients and dental staff.

Aerosol and splatter generation with rotary handpieces used in restorative and orthodontic dentistry: a systematic review

Introduction

The COVID-19 pandemic has caused major disruptions in dental care globally, in part due to the potential for contaminated aerosol to be generated by dental activities. This systematic review assesses the literature for changes in aerosol-contamination levels when rotary instruments are used, (1) as distance increases from patient’s mouth; (2) as time passes after the procedure; and (3) when using different types of handpieces.

Methods

The review methods and reporting are in line with PRISMA statements. A structured search was conducted over five platforms (September 2021). Studies were assessed independently by two reviewers. To be eligible studies had to assess changes in levels of aerosol contamination over different distances, and time points, with rotary hand instruments. Studies’ methodologies and the sensitivity of the contamination-measurement approaches were evaluated. Results are presented descriptively.

Results

From 422 papers identified, 23 studies were eligible. All investigated restorative procedures using rotary instruments and one study additionally looked at orthodontic bracket adhesive material removal. The results suggest contamination is significantly reduced over time and distance. However, for almost all studies that investigated these two factors, the sizes of the contaminated particles were not considered, and there were inconclusive findings regarding whether electric-driven handpieces generate lower levels of contaminated particles.

Conclusion

Aerosol contamination levels reduce as distances, and post-procedure times increase. However, there was sparce and inconsistent evidence on the clearing time and no conclusions could be drawn. High-speed handpieces produce significantly higher levels of contamination than slow-speed ones, and to a lesser extent, micro-motor handpieces. However, when micro-motor handpieces were used with water, the contamination levels rose and were similar to high-speed handpiece contamination levels.

Pandemic Preparedness and Response: A Foldable Tent to Safely Remove Contaminated Dental Aerosols—Clinical Study and Patient Experience

The D-DART (Droplet and Aerosol Reducing Tent) is a foldable design that can be attached to the dental chair to prevent the spread of contaminated dental aerosols. The objective of this study was to evaluate the ability of the D-DART to reduce spread of aerosols generated during dental treatment. Thirty-two patients (sixteen per group) undergoing deep ultrasonic scaling were recruited and randomly allocated to groups D-DART or Control (no D-DART). After 20 min from the start of the treatment, the clinician’s face shield and dental chair light were swabbed and the viable microbial load was quantified (ATP bioluminescence analysis, blinded operator). Statistical analyses were performed with Tukey’s Honest Test with a level of significance pre-set at 5%. There were significant increases in ATP values obtained from the operator’s face shield and dental chair light for the Control compared with baseline (31.3 ± 8.5 and fold increase). There was no significant change in microbial load when the D-DART was used compared with baseline (1.5 ± 0.4 fold increase). The D-DART contained and prevented the spread of aerosols generated during deep scaling procedures.

Restoration of dental services after COVID-19: The fallow time determination with laser light scattering

In time, dental health care has slowly expanded beyond emergency treatment to treat oral diseases. How to reduce the cross-transmission risk in dental surgery has raised much more attention. Considering the lack of consistency of fallow time (FT) in its necessity and duration, the highly sensitive laser light scattering method has been proposed to visualize the airborne lifetime and decay rate of suspended particles in the dental surgery environment. The FT is defined as when the number of suspended particles drops to the level that the next patient can safely enter after the aerosol-generating procedures (AGPs). The ultrasonic scaling was performed in the mock-up experimental dental clinic with 6 air changes per hour (ACH), and the instantaneous moments of the droplets were recorded by a high-speed camera. Without any mitigation measures, the estimated FT in the single dental surgery environment with 6 ACH was in the range of 27-35 min, significantly affecting the number of daily dental services. Despite the cooperation of high-volume evacuation (HVE [IO]) cannot eliminate the FT to zero minutes, the equipment could reduce the required FT by 3-11 min for the suspended particles reducing the baseline levels. Owing to the longer airborne lifetime of suspended particles, the relevant protection equipment, especially respiratory protection, is quite essential in dental surgery. The obtained results of this study will provide evidence to establish the revised FT in dental surgery guidelines and protect the health and wellbeing of urban dwellers.