Nanoribbon network formation of enzymatically synthesized cellulose oligomers through dispersion stabilization of precursor particles

Nanoarchitectonics of cello-oligosaccharides: A route toward artificial nanocelluloses

Colloidal cellulose nanoparticles, or nanocelluloses, are derived from natural cellulose sources in a top-down manner via physical and/or chemical treatments that extract naturally occurring cellulose nanostructures. Naturally derived nanocelluloses have been successfully commercialized in various fields, and their potential is still being widely explored in materials science. Moreover, recent advances in nanoarchitectonics of low-molecular-weight cellulose, or cello-oligosaccharides, have opened new avenues for developing "artificial nanocelluloses". Artificial nanocelluloses composed of cello-oligosaccharides synthesized via enzymatic oligomerization or solid-phase glycan synthesis technology are termed "synthetic nanocelluloses". These nanostructures are abiotically constructed in a bottom-up manner at the molecular level via self-assembly of cello-oligosaccharides in vitro. Modulation of the assembly process and molecular design provides control over the molecular alignment, nanomorphology, and surface functionality of artificial nanocelluloses. This review summarizes recent research progress in artificial nanocelluloses, from the preparation and self-assembly of cello-oligosaccharides to their potential applications.

Role of van der Waals, Electrostatic, and Hydrogen-Bond Interactions for the Relative Stability of Cellulose Iβ and II Crystals

Naturally occurring cellulose Iβ with its characteristic parallel orientation of cellulose chains is less stable than cellulose II, in which neighboring pairs of chains are oriented antiparallel to each other. While the distinct hydrogen-bond patterns of these two cellulose crystal forms are well established, the energetic role of the hydrogen bonds for crystal stability, in comparison to the van der Waals (vdW) and overall electrostatic interactions in the crystals, is a matter of current debate. In this article, we investigate the relative stability of celluloses Iβ and II in energy minimizations with classical force fields. We find that the larger stability of cellulose II results from clearly stronger electrostatic interchain energies that are only partially compensated for by stronger vdW interchain energies in cellulose Iβ. In addition, we show that a multipole description of hydrogen bonds that includes the COH groups of donor and acceptor oxygen atoms leads to consistent interchain hydrogen-bond energies that account for roughly 70% and 75% of the interchain electrostatics in celluloses Iβ and II, respectively.

Bottom-Up Synthesized Glucan Materials: Opportunities from Applied Biocatalysis

Linear d-glucans are natural polysaccharides of simple chemical structure. They are comprised of d-glucosyl units linked by a single type of glycosidic bond. Noncovalent interactions within, and between, the d-glucan chains give rise to a broad variety of macromolecular nanostructures that can assemble into crystalline-organized materials of tunable morphology. Structure design and functionalization of d-glucans for diverse material applications largely relies on top-down processing and chemical derivatization of naturally derived starting materials. The top-down approach encounters critical limitations in efficiency, selectivity, and flexibility. Bottom-up approaches of d-glucan synthesis offer different, and often more precise, ways of polymer structure control and provide means of functional diversification widely inaccessible to top-down routes of polysaccharide material processing. Here the natural and engineered enzymes (glycosyltransferases, glycoside hydrolases and phosphorylases, glycosynthases) for d-glucan polymerization are described and the use of applied biocatalysis for the bottom-up assembly of specific d-glucan structures is shown. Advanced material applications of the resulting polymeric products are further shown and their important role in the development of sustainable macromolecular materials in a bio-based circular economy is discussed.

Suspension Culture System for Isolating Cancer Spheroids using Enzymatically Synthesized Cellulose Oligomers

Isolating cancer cells from tissues and providing an appropriate culture environment are important for a better understanding of cancer behavior. Although various three-dimensional (3D) cell culture systems have been developed, techniques for collecting high-purity spheroids without strong stimulation are required. Herein, we report a 3D cell culture system for the isolation of cancer spheroids using enzymatically synthesized cellulose oligomers (COs) and demonstrate that this system isolates only cancer spheroids under coculture conditions with normal cells. CO suspensions in a serum-containing cell culture medium were prepared to suspend cells without settling. High-purity cancer spheroids could be separated by filtration without strong stimulation because the COs exhibited antibiofouling properties and a viscosity comparable to that of the culture medium. When human hepatocellular carcinoma (HepG2) cells, a model for cancer cells, were cultured in the CO suspensions, they proliferated clonally and efficiently with time. In addition, only developed cancer spheroids from HepG2 cells were collected in the presence of normal cells by using a mesh filter with an appropriate pore size. These results indicate that this approach has potential applications in basic cancer research and cancer drug screening.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2017-2018

This review is the tenth update of the original article published in 1999 on the application of matrix-assisted laser desorption/ionization mass spectrometry (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2018. Also included are papers that describe methods appropriate to glycan and glycoprotein analysis by MALDI, such as sample preparation techniques, even though the ionization method is not MALDI. Topics covered in the first part of the review include general aspects such as theory of the MALDI process, new methods, matrices, derivatization, MALDI imaging, fragmentation and the use of arrays. The second part of the review is devoted to applications to various structural types such as oligo- and poly-saccharides, glycoproteins, glycolipids, glycosides, and biopharmaceuticals. Most of the applications are presented in tabular form. The third part of the review covers medical and industrial applications of the technique, studies of enzyme reactions, and applications to chemical synthesis. The reported work shows increasing use of combined new techniques such as ion mobility and highlights the impact that MALDI imaging is having across a range of diciplines. MALDI is still an ideal technique for carbohydrate analysis and advancements in the technique and the range of applications continue steady progress.

Recent advances in enzymatic synthesis of β-glucan and cellulose

Bottom-up synthesis of β-glucans such as callose, fungal β-(1,3)(1,6)-glucan and cellulose, can create the defined compounds that are needed to perform fundamental studies on glucan properties and develop applications. With the importance of β-glucans and cellulose in high-profile fields such as nutrition, renewables-based biotechnology and materials science, the enzymatic synthesis of such relevant carbohydrates and their derivatives has attracted much attention. Here we review recent developments in enzymatic synthesis of β-glucans and cellulose, with a focus on progress made over the last five years. We cover the different types of biocatalysts employed, their incorporation in cascades, the exploitation of enzyme promiscuity and their engineering, and reaction conditions affecting the production as well as in situ self-assembly of (non)functionalised glucans. The recent achievements in the application of glycosyl transferases and β-1,4- and β-1,3-glucan phosphorylases demonstrate the high potential and versatility of these biocatalysts in glucan synthesis in both industrial and academic contexts.

Self-assembly of cellulose for creating green materials with tailor-made nanostructures

Inspired by living systems, biomolecules have been employed in vitro as building blocks for creating advanced nanostructured materials. In regard to nucleic acids, peptides, and lipids, their self-assembly pathways and resulting assembled structures are mostly encoded in their molecular structures. On the other hand, outside of its chain length, cellulose, a polysaccharide, lacks structural diversity; therefore, it is challenging to direct this homopolymer to controllably assemble into ordered nanostructures. Nevertheless, the properties of cellulose assemblies are outstanding in terms of their robustness and inertness, and these assemblies are attractive for constructing versatile materials. In this review article, we summarize recent research progress on the self-assembly of cellulose and the applications of assembled cellulose materials, especially for biomedical use. Given that cellulose is the most abundant biopolymer on Earth, gaining control over cellulose assembly represents a promising route for producing green materials with tailor-made nanostructures.

Progress and challenges in the synthesis of sequence controlled polysaccharides

The sequence, length and substitution of a polysaccharide influence its physical and biological properties. Thus, sequence controlled polysaccharides are important targets to establish structure-properties correlations. Polymerization techniques and enzymatic methods have been optimized to obtain samples with well-defined substitution patterns and narrow molecular weight distribution. Chemical synthesis has granted access to polysaccharides with full control over the length. Here, we review the progress towards the synthesis of well-defined polysaccharides. For each class of polysaccharides, we discuss the available synthetic approaches and their current limitations.

Kinetic modeling of phosphorylase-catalyzed iterative β-1,4-glycosylation for degree of polymerization-controlled synthesis of soluble cello-oligosaccharides

BACKGROUND

Cellodextrin phosphorylase (CdP; EC 2.4.1.49) catalyzes the iterative β-1,4-glycosylation of cellobiose using α-D-glucose 1-phosphate as the donor substrate. Cello-oligosaccharides (COS) with a degree of polymerization (DP) of up to 6 are soluble while those of larger DP self-assemble into solid cellulose material. The soluble COS have attracted considerable attention for their use as dietary fibers that offer a selective prebiotic function. An efficient synthesis of soluble COS requires good control over the DP of the products formed. A mathematical model of the iterative enzymatic glycosylation would be important to facilitate target-oriented process development.

RESULTS

A detailed time-course analysis of the formation of COS products from cellobiose (25 mM, 50 mM) and α-D-glucose 1-phosphate (10-100 mM) was performed using the CdP from Clostridium cellulosi. A mechanism-based, Michaelis-Menten type mathematical model was developed to describe the kinetics of the iterative enzymatic glycosylation of cellobiose. The mechanistic model was combined with an empirical description of the DP-dependent self-assembly of the COS into insoluble cellulose. The hybrid model thus obtained was used for kinetic parameter determination from time-course fits performed with constraints derived from initial rate data. The fitted hybrid model provided excellent description of the experimental dynamics of the COS in the DP range 3-6 and also accounted for the insoluble product formation. The hybrid model was suitable to disentangle the complex relationship between the process conditions used (i.e., substrate concentration, donor/acceptor ratio, reaction time) and the reaction output obtained (i.e., yield and composition of soluble COS). Model application to a window-of-operation analysis for the synthesis of soluble COS was demonstrated on the example of a COS mixture enriched in DP 4.

CONCLUSIONS

The hybrid model of CdP-catalyzed iterative glycosylation is an important engineering tool to study and optimize the biocatalytic synthesis of soluble COS. The kinetic modeling approach used here can be of a general interest to be applied to other iteratively catalyzed enzymatic reactions of synthetic importance.

Synthetic semicrystalline cellulose oligomers as efficient Pickering emulsion stabilizers

Nanocellulose are promising Pickering emulsion stabilizers for being sustainable and non-toxic. In this work, semicrystalline cellulose oligomers (SCCO), which were synthesized from maltodextrin using cellobiose as primer by in vitro enzymatic biosystem, were exploited as stabilizers for oil-in-water Pickering emulsions. At first, the morphology, structure, thermal and rheological properties of SCCO suspensions were characterized, showing that SCCO had a sheet morphology and typical cellulose-Ⅱ structure with 56 % crystallinity. Then the kinetic stabilities of emulsions containing various amounts of SCCO were evaluated against external stress such as pH, ionic strength, and temperature. Noting that SCCO-Pickering emulsions exhibited excellent stabilities against changes in centrifugation, pH, ionic strengths, and temperatures, and it was also kinetically stable for up to 6 months. Both SCCO suspensions and their emulsions exhibited gel-like structures and shear-thinning behaviors. These results demonstrated great potential of SCCO to be applied as nanocellulosic emulsifiers in food, cosmetic and pharmaceutical industries.

Aqueous Suspensions of Cellulose Oligomer Nanoribbons for Growth and Natural Filtration-Based Separation of Cancer Spheroids

In vitro growth of cancer spheroids (CSs) and the subsequent separation of CSs from a 2D or 3D cell culture system are important for fundamental cancer studies and cancer drug screening. Although biopolymer-based or synthetic hydrogels are suitable candidates to be used as 3D cell culture scaffolds, alternatives with better processing capabilities are still required to set up cell culture microenvironment. In this study, we show that aqueous suspensions of crystalline nanoribbons composed of cellulose oligomers have a potential for CS growth and separation. The nanoribbon suspensions in serum-containing cell culture media fixed single cancer cells and CSs with large sizes in a 3D space, leading to suspension cultures for CS growth corresponding to culture time. Well-grown CSs were easily separated from the suspensions by natural filtration using a mesh filter with a suitable pore size. Cell viability tests revealed negligible cytotoxicity of the nanoribbons. In addition, physical damages to CSs by the separation procedures were negligible. Stable suspensions of biocompatible nanomaterials will thus provide novel microenvironments for growth and separation of diverse cell aggregates.

Phosphorylase-catalyzed bottom-up synthesis of short-chain soluble cello-oligosaccharides and property-tunable cellulosic materials

Cellulose-based materials are produced industrially in countless varieties via top-down processing of natural lignocellulose substrates. By contrast, cellulosic materials are only rarely prepared via bottom up synthesis and oligomerization-induced self-assembly of cellulose chains. Building up a cellulose chain via precision polymerization is promising, however, for it offers tunability and control of the final chemical structure. Synthetic cellulose derivatives with programmable material properties might thus be obtained. Cellodextrin phosphorylase (CdP; EC 2.4.1.49) catalyzes iterative β-1,4-glycosylation from α-d-glucose 1-phosphate, with the ability to elongate a diversity of acceptor substrates, including cellobiose, d-glucose and a range of synthetic glycosides having non-sugar aglycons. Depending on the reaction conditions leading to different degrees of polymerization (DP), short-chain soluble cello-oligosaccharides (COS) or insoluble cellulosic materials are formed. Here, we review the characteristics of CdP as bio-catalyst for synthetic applications and show advances in the enzymatic production of COS and reducing end-modified, tailored cellulose materials. Recent studies reveal COS as interesting dietary fibers that could provide a selective prebiotic effect. The bottom-up synthesized celluloses involve chains of DP ≥ 9, as precipitated in solution, and they form ~5 nm thick sheet-like crystalline structures of cellulose allomorph II. Solvent conditions and aglycon structures can direct the cellulose chain self-assembly towards a range of material architectures, including hierarchically organized networks of nanoribbons, or nanorods as well as distorted nanosheets. Composite materials are also formed. The resulting materials can be useful as property-tunable hydrogels and feature site-specific introduction of functional and chemically reactive groups. Therefore, COS and cellulose obtained via bottom-up synthesis can expand cellulose applications towards product classes that are difficult to access via top-down processing of natural materials.

Neutralization-Induced Self-Assembly of Cellulose Oligomers into Antibiofouling Crystalline Nanoribbon Networks in Complex Mixtures

Molecular self-assembly in solutions is a powerful strategy for fabricating functional architectures. Various bio(macro)molecules have been used as self-assembly components. However, structural polysaccharides, such as cellulose and chitin, have rarely been a research focus for molecular self-assembly, even though their crystalline assemblies potentially have robust physicochemical properties. Herein, we demonstrated the neutralization-induced self-assembly of cellulose oligomers into antibiofouling crystalline nanoribbon networks to produce physically cross-linked hydrogels. The self-assembly proceeded even in versatile complex mixtures, such as serum-containing cell culture media, in a controlled manner for 3D cell culture. The cultured cells grew into cell aggregates (spheroids), which were simply collected through natural filtration due to the mechanically crushable property of the crystalline nanoribbons through water flow by pipetting. We will show the potential of cellulose oligomers for biocompatible, crystalline soft materials.

Biocatalytic oligomerization-induced self-assembly of crystalline cellulose oligomers into nanoribbon networks assisted by organic solvents

Crystalline poly- and oligosaccharides such as cellulose can form extremely robust assemblies, whereas the construction of self-assembled materials from such molecules is generally difficult due to their complicated chemical synthesis and low solubility in solvents. Enzyme-catalyzed oligomerization-induced self-assembly has been shown to be promising for creating nanoarchitectured crystalline oligosaccharide materials. However, the controlled self-assembly into organized hierarchical structures based on a simple method is still challenging. Herein, we demonstrate that the use of organic solvents as small-molecule additives allows for control of the oligomerization-induced self-assembly of cellulose oligomers into hierarchical nanoribbon network structures. In this study, we dealt with the cellodextrin phosphorylase-catalyzed oligomerization of phosphorylated glucose monomers from ᴅ-glucose primers, which produce precipitates of nanosheet-shaped crystals in aqueous solution. The addition of appropriate organic solvents to the oligomerization system was found to result in well-grown nanoribbon networks. The organic solvents appeared to prevent irregular aggregation and subsequent precipitation of the nanosheets via solvation for further growth into the well-grown higher-order structures. This finding indicates that small-molecule additives provide control over the self-assembly of crystalline oligosaccharides for the creation of hierarchically structured materials with high robustness in a simple manner.

Temperature-Directed Assembly of Crystalline Cellulose Oligomers into Kinetically Trapped Structures during Biocatalytic Synthesis

Crystalline polysaccharides, such as cellulose and chitin, can form superior assemblies in terms of physicochemical stability and mechanical properties. However, their use as molecular building blocks for self-assembled materials is rare, possibly because each crystalline polysaccharide has its own unique monomer unit, preventing molecular design for controlling the self-assembly. Herein, we demonstrate the temperature-directed assembly of crystalline cellulose oligomers into kinetically trapped structures, namely, precipitated nanosheets, nanoribbon network hydrogels, and dispersed nanosheets (in descending order of temperature). It was found that enzymatically synthesized cellulose oligomers self-assembled in situ into those structures depending on the synthetic temperatures. Mechanistic studies suggested that the formation of the nanoribbon networks and the dispersed nanosheets at lower temperatures were driven by synergy between the decreased hydrophobic effect and the simultaneously induced self-crowding effect. Furthermore, nanoribbon network formation was exploited for the construction of cellulose oligomer-based hybrid gels with colloidal particles. Our findings promote the development of robust self-assembled materials composed of crystalline polysaccharides with highly ordered nano-to-macroscale structures.