Stimulus-responsive soft dispersed systems developed based on functional polymer particles: bubbles and liquid marbles

Janus Particles Synthesized via Vapor-Phase Coupling Polymerization Protocol

The vapor-phase polymerization of pyrrole in the presence of polystyrene (PS) particles adsorbed at the air-water interface successfully leads to the formation of PS/polypyrrole (PPy) Janus particles where only the surface in contact with the air phase is regioselectively covered with the PPy nanolayer. The coverage area of the PPy nanolayer on the Janus particles, and therefore the contact angle of Janus particles at the air-liquid interface, decreases with a decrease in surface tension of liquid by the addition of isopropanol. The contact angle of particles at the interface decreases after the polymerization, which should be because the pyrrole monomer dissolved in the water phase from the gas phase promotes the wetting of the liquid to the PS particles by decreasing the surface tension of the liquid. Controlling the PS particle size realizes the formation of PS/PPy Janus particles with sizes ranging between 5 and 1000 μm. Furthermore, the Janus particles are demonstrated to be oriented at the air-water interface with the hydrophilic PS side toward the water phase and the hydrophobic PPy side toward the air phase, realizing stabilization of an armored bubble in the water medium.

Flexible deformation and special interface structure in nanoparticle-stabilized Pickering bubbles strengthen the immunological response as adjuvant

Adjuvants can enhance an immunological response, which is an important part of vaccine research. Pickering bubbles have been a mega-hit for biomedical applications, including in vivo visualization and targeted drug delivery. However, there have been no studies on Pickering bubbles as an immunological adjuvant, and the special properties and structures of Pickering bubbles may play an important role in immunization. In this study, poly(lactic-co-glycolic acid) (PLGA) particles were used to construct nanoparticle-stabilized Pickering bubbles (PPBs). PPBs were evaluated as immunological adjuvants based on immune response effects and mechanisms and aiming at future applications. PPBs have a flexible gas core and a special surface structure that can increase the cell contact area to promote phagocytosis and enhance the immune response. Quartz crystal microbalance with dissipation (QCM-D) data showed the flexibility of PPBs, and confocal images captured the deformability of PPBs during cell uptake. Flow cytometry and antibody titer detection showed that PPBs significantly promoted antigen uptake and activation of bone-marrow-derived dendritic cells (BMDCs) and induced an immune response with upregulated SIINFEKL MHC I and CD127 molecules on the surface of CD8+ T cells, indicating excellent antigen cross-presentation and cellular immune triggering effects. The upregulation of CD44 and CD62L on CD4+ T cells and the IgG2a/IgG1 ratio bias further demonstrated the excellent adjuvant role of PPBs in immunity. Finally, the biosafety of PPBs as an immunological adjuvant was also demonstrated. Our study demonstrates the potential of particle-stabilized bubbles as immune adjuvants, which provides innovative ideas for vaccine development and design.

Cascading responses of stimuli-responsive materials

Responsiveness to stimuli is important in daily life: natural biological activity is governed by continuous stimulus responsiveness. The design of stimuli-responsive materials is required for the development of advanced sensing systems. Although fully controlled stimuli-responsive systems have been constructed in nature, artificial systems remain a challenge. Conventional stimuli-responsive materials show direct responsiveness to an applied stimulus (Stimulus 1), with structural changes in their molecules and organized states. This feature article focuses on cascading responses as a new concept for integrating stimuli-responsive material design. In cascading responses, an original stimulus (Stimulus 1) is converted into other stimuli (Stimulus 2, 3, …, N) through successive conversions. Stimulus N provides the eventual output response. Integration of multiple stimuli-responsive materials is required to achieve cascading responses. Although cascade, domino, and tandem chemical reactions have been reported at the molecular level, they are not used for materials with higher organized structures. In this article, we introduce functional carriers and sensors based on cascading responses as model cases. The concept of cascading responses enables the achievement of transscale responsivity and sensitivity, which are not directly induced by the original stimulus or its responsive material, for the development of advanced dynamic functional materials.

Relationship between π-A isotherms and single microgel/microgel array structures revealed via the direct visualization of microgels at the air/water interface

The structures of single microgels and microgel arrays formed at the air/water interface were visualized directly, and their structures correlated with π-A isotherms in order to understand the compression behavior of soft and deformable microgels at this interface. Large microgels (ca. 4 μm) were synthesized so that these can be clearly visualized at the air/water interface, even under high compression, and a series of microgel compression experiments were directly evaluated using a Langmuir trough equipped with a fluorescence microscope. The experiments revealed that upon compressing the microgel arrays at the interface voids disappeared and colloidal crystallinity increased. However, the colloidal crystallinity decreased when the microgel arrays were strongly compressed. In addition, when the structures were observed at higher magnification, it became clear that the single microgel structures, when visualized from above, changed from circular to polygonal upon compressing the microgel array. The results of this study can be expected to improve the understanding of the compression behavior of microgel arrays adsorbed at the air/water interface and will thus be useful for the creation of new functional microgel stabilizers with potential applications in e.g., bubbles and emulsions.

"Foam Marble" Stabilized with One Type of Polymer Particle

There has been increasing interest in colloidal particles adsorbed at the air-water interface, which lead to stabilization of aqueous foams and liquid marbles. The wettability of the particles at the interface is known to play an important role in determining the type of air/water dispersed system. Foams are preferably formed using relatively hydrophilic particles, and liquid marbles tend to be formed using relatively hydrophobic particles. In this study, submicrometer-sized polystyrene particles carrying poly(N,N-diethylaminoethyl methacrylate) hairs (PDEA-PS particles), which are synthesized by dispersion polymerization, are demonstrated to work as a particulate stabilizer for both aqueous foams and liquid marbles. A key point for the hydrophilic PDEA-PS particles to stabilize both aqueous foams and liquid marbles, which have been generally stabilized with hydrophilic and hydrophobic particles, respectively, is the wetting mode of the particles with respect to water. The flocculates of PDEA-PS particles adsorb to the air-water interface from the aqueous phase to stabilize foam in a Wenzel mode, and the dried PDEA-PS particles adsorb to the interface as aggregates from the air phase to stabilize liquid marbles in a metastable Cassie-Baxter mode. On the basis of the difference in the wetting mode, stabilization of an air-in-water-in-air multiple gas-liquid dispersed system, named "foam marble", is realized. After the evaporation of water from the foam marble, a porous sphere is successfully obtained with pore sizes of a few tens of micrometers (reflecting the bubble sizes) and a few tens of nanometers (reflecting the gap sizes among the PDEA-PS particles).

Pickering foams and parameters influencing their characteristics

Pickering foams are available in many applications and have been continually gaining interest in the last two decades. Pickering foams are multifaceted, and their characteristics are highly dependent on many factors, such as particle size, charge, hydrophobicity and concentration as well as the charge and concentration of surfactants and salts available in the system. A literature review of these individual studies at first might seem confusing and somewhat contradictory, particularly in multi-component systems with particles and surfactants with different charges in the presence of salts. This paper provides a comprehensive overview of particle-stabilized foams, also known as Pickering foams and froths. Underlying mechanisms of foam stabilization by particles with different morphology, surface chemistry, size and type are reviewed and clarified. This paper also outlines the role of salts and different factors such as pH, temperature and gas type on Pickering foams. Further, we highlight recent developments in Pickering foams in different applications such as food, mining, oil and gas, and wastewater treatment industries, where Pickering foams are abundant. We conclude this overview by presenting important research avenues based on the gaps identified here. The focus of this review is limited to Pickering foams of surfactants with added salts and does not include studies on polymers, proteins, or other macromolecules.

Durable gelfoams stabilized by compressible nanocomposite microgels

Compressible nanocomposite microgels can stabilize the air/water interfaces of gas bubbles for several months, which affords durable gelfoams.

Boxes fabricated from plate-stabilized liquid marbles

Polyhedral liquid marbles were fabricated using hydrophobic polymer plates in the shape of a circle, a heart and a star as a stabilizer and water as an inner liquid phase. Boxes could be fabricated by the evaporation of the inner water from the liquid marbles. The fabrication efficiency and stability of these boxes as a function of the plate shape were investigated. Functional materials such as polymers and colloidal particles were successfully introduced into the boxes.

pH-responsive pickering foam created from self-aggregate polymer using dynamic covalent bond

HYPOTHESIS

Responsive surfactant systems based on dynamic covalent bond exhibit an unsatisfactory foamability and foam stability, despite their documented functionality in emulsions. As such we anticipate that the foaming performance should be improved by introducing Pickering effect, which is possible when the responsiveness of the dynamic covenant bonds controls not only the hydrophobicity of polymers but also their aggregation behavior (to form nanoparticles).

EXPERIMENTS

Here we created surface active nanoparticles made from self-aggregated polymers consisting of PAH (polyallylamine hydrochloride)-BA (benzaldehyde). The covalent imine bonds between originally hydrophilic PAH and hydrophobic BA are dynamic in that their formation and breakage is a function of solution pH, confirmed by ¹H NMR and dynamic interfacial tension measurement.

FINDINGS

At pH 7.4, a stable foam is achieved in the PAH-BA (amino to aldehyde ratio at 1:0.2) solution; while at pH 2.5, it defoams due to breakage of dynamic bonds corresponding to the measured diminishing surface activity. The reversibility of foaming-defoaming has been demonstrated by alternatively changing pH for multiple cycles, with the foaming performance persistent. The foam stability can be improved by more hydrophobic compounds e.g. at a lower amino to aldehyde ratio or using PAH-cinnamaldehyde (CA). The reversible and responsive foaming demonstrated in a Pickering system provides a new method to create novel foaming systems with properties desirable to many applications.

Elemental Sulfur-Stabilized Liquid Marbles: Properties and Applications

Sulfur-stabilized liquid marbles were readily prepared by rolling water droplets on a sulfur (S₈) powder bed. Because of the construction of a gel layer on the surface of liquid marbles, the resulting liquid marbles have shape-designable characteristics. The effects of rolling time and volume of droplets on the deformability of sulfur-stabilized liquid marbles were investigated along with their mechanical stability and lifetime. The capability of sulfur-stabilized liquid marbles to be deformed at different pH values enables these liquid marbles to act as microreservoirs with desired shapes for aqueous solutions. Immersing the sulfur-stabilized liquid marbles into organic liquids leads to an increase in the liquid marbles' lifetime, and thereby they can survive at the interface of aqueous-organic two-phased systems for a long time. Finally, the applications of sulfur-stabilized liquid marbles as photocatalytic microreactors, electrochemical microcells, and monodisperse Pickering-like emulsions were demonstrated.

Light-Driven Locomotion of Bubbles

Remotely controlling the movement of small objects is a challenging research topic, which can realize the transportation of materials. In this study, remote locomotion control of particle-stabilized bubbles on a planar water surface by near-infrared laser or sunlight irradiation is demonstrated. A light-induced Marangoni flow was utilized to induce the locomotion of the bubbles on water surface, and the timing and direction of the locomotion can be controlled by irradiation timing and direction on demand. The velocity, acceleration, and force of the bubbles were analyzed. It was also confirmed that the bubbles can work as light-driven towing engines to pull other objects. Furthermore, it was demonstrated that the bubbles can work as an adhesive to bond two solid substrates by application of compressive stress under water. Such remote transport of the materials, pulling of the objects by light, and controlling the release of gas on demand should open up a wide field of conceivable applications.

pH-Dependent Foam Formation Using Amphoteric Colloidal Polymer Particles

Near-monodispersed micrometer-sized polystyrene (PS) particles carrying amidino and carboxyl groups on their surfaces were synthesized by soap-free emulsion polymerization using an amphoteric free radical initiator. The resulting amphoteric PS particles were characterized in terms of diameter, morphology, disperibility in aqueous media and surface charge using scanning electron microscopy (SEM), optical microscopy (OM), sedimentation rate and electrophoretic measurements. At pH 2.0, where the amidino groups are protonated (positively charged), and at pH 11.0, where the carboxyl groups are deprotonated (negatively charged), the PS particles were well dispersed in aqueous media via electrostatic repulsion. At pH 4.8, where the surface charges are neutral, the PS particles were weakly aggregated. Furthermore, it was confirmed that the PS particles can function as a pH-sensitive foam stabilizer: foamability and foam stability were higher at pH 2.0 and 4.8, where the PS particles can be adsorbed to the air–water interface, and lower at pH 11.0, where the PS particles tend to disperse in bulk aqueous medium. SEM and OM studies indicated that hexagonally close-packed arrays of PS particles were formed on the bubble surfaces and moiré patterns were observed on the dried foams. Moreover, the fragments of dried foams showed iridescent character under white light.