Colour selective control of terahertz radiation using two-dimensional hybrid organic inorganic lead-trihalide perovskites

Chiral Hybrid Copper(I) Halides for High Efficiency Second Harmonic Generation with a Broadband Transparency Window

Chiral hybrid organic-inorganic metal halides (HOMHs) with intrinsic noncentrosymmetry have shown great promise for applications in second-order nonlinear optics (NLO). However, established chiral HOMHs often suffer from their relatively small band gaps, which lead to negative impacts on transparent window and laser-induced damage thresholds (LDT). Here, we have synthesized two chiral HOMHs based on Cu^I halides, namely (R-/S-MBA)CuBr₂ , which feature well-balanced NLO performances with a highly efficient SHG response, outstanding optical transparency, and high LDT. The effective second-order NLO coefficient of (R-MBA)CuBr₂ has been determined to be ≈24.7 pm V^-1 , which is two orders of magnitude higher than that of their Cu^II counterparts. This work shows the promising potential of Cu^I -based chiral HOMHs for nonlinear photonic applications in wide wavelength regions.

Plasmonic-perovskite solar cells, light emitters, and sensors

The field of plasmonics explores the interaction between light and metallic micro/nanostructures and films. The collective oscillation of free electrons on metallic surfaces enables subwavelength optical confinement and enhanced light-matter interactions. In optoelectronics, perovskite materials are particularly attractive due to their excellent absorption, emission, and carrier transport properties, which lead to the improved performance of solar cells, light-emitting diodes (LEDs), lasers, photodetectors, and sensors. When perovskite materials are coupled with plasmonic structures, the device performance significantly improves owing to strong near-field and far-field optical enhancements, as well as the plasmoelectric effect. Here, we review recent theoretical and experimental works on plasmonic perovskite solar cells, light emitters, and sensors. The underlying physical mechanisms, design routes, device performances, and optimization strategies are summarized. This review also lays out challenges and future directions for the plasmonic perovskite research field toward next-generation optoelectronic technologies.

Coherent control of asymmetric spintronic terahertz emission from two-dimensional hybrid metal halides

Next-generation terahertz (THz) sources demand lightweight, low-cost, defect-tolerant, and robust components with synergistic, tunable capabilities. However, a paucity of materials systems simultaneously possessing these desirable attributes and functionalities has made device realization difficult. Here we report the observation of asymmetric spintronic-THz radiation in Two-Dimensional Hybrid Metal Halides (2D-HMH) interfaced with a ferromagnetic metal, produced by ultrafast spin current under femtosecond laser excitation. The generated THz radiation exhibits an asymmetric intensity toward forward and backward emission direction whose directionality can be mutually controlled by the direction of applied magnetic field and linear polarization of the laser pulse. Our work demonstrates the capability for the coherent control of THz emission from 2D-HMHs, enabling their promising applications on the ultrafast timescale as solution-processed material candidates for future THz emitters.

Terahertz radiation has wide array of potential uses, however, finding robust and tunable sources of terahertz radiation has been challenging. Here, Cong et al demonstrate a room temperature terahertz source composed of a two-dimensional hybrid metal halide and ferromagnetic heterostructure.

Enhancement of silicon modulating properties in the THz range by YAG-Ce coating

Y₃Al_5-xGa_xO₁₂:Ce³⁺,V³⁺ (YAG:Ce) has excellent chemical stability and unprecedented luminous efficiency. Its strong photoresponsive property is thoroughly utilized in designing excellent optical information storage device. Here, the remarkable photoconductivity of YAG:Ce is exploited to demonstrate a hybrid YAG:Ce-silicon device that shows high speed terahertz wave spatial modulation. A wide terahertz spectra modulation is observed under different pump powers in frequency range from 0.2 to 1.8 THz. Furthermore, a dynamic control of the terahertz wave intensity is also observed in the transmission system. The modulation speed and depth of the device is measured to be 4 MHz (vs 0.2 kHz)and 83.8%(vs50%) for bare silicon, respectively. The terahertz transmission spectra exhibits highly efficiency terahertz modulation by optically pumping a YAG:Ce film on silicon with low optical pump fluence.

Electrically tunable liquid crystal terahertz device based on double-layer plasmonic metamaterial

In this paper, a nematic liquid crystal (NLC)-based tunable terahertz (THz) plasmonic metamaterials (MMs) with large modulation depth (MD) and low insertion loss (IL) is designed and experimentally verified at THz frequencies. The proposed structure includes two-layered MM that is immersed in LC. The metal MM is used directly as electrode. The tunable device with a 46×46 array of sub-wavelength circular air loops was fabricated on a quartz glass substrate, with 2×2 cm² area and 220 µm thickness. The obtained results show that the amplitude MD and IL for normally incident electromagnetic (EM) waves are about 96% and 1.19 dB at 421.2 GHz, respectively, when the bias voltage applied to the NLC layer varies from 0 to 16 V. Meanwhile, the transmission peak frequency gradually decreases from 421.2 to 381.8 GHz, and the frequency tunability (FT) of the proposed structure is greater than 9.35%. This study provides a potential solution for THz modulators, filters, and switches.

Ultrafast frequency-agile terahertz devices using methylammonium lead halide perovskites

The ability to control the response of metamaterial structures can facilitate the development of new terahertz devices, with applications in spectroscopy and communications. We demonstrate ultrafast frequency-agile terahertz metamaterial devices that enable such a capability, in which multiple perovskites can be patterned in each unit cell with micrometer-scale precision. To accomplish this, we developed a fabrication technique that shields already deposited perovskites from organic solvents, allowing for multiple perovskites to be patterned in close proximity. By doing so, we demonstrate tuning of the terahertz resonant response that is based not only on the optical pump fluence but also on the optical wavelength. Because polycrystalline perovskites have subnanosecond photocarrier recombination lifetimes, switching between resonances can occur on an ultrafast time scale. The use of multiple perovskites allows for new functionalities that are not possible using a single semiconducting material. For example, by patterning one perovskite in the gaps of split-ring resonators and bringing a uniform thin film of a second perovskite in close proximity, we demonstrate tuning of the resonant response using one optical wavelength and suppression of the resonance using a different optical wavelength. This general approach offers new capabilities for creating tunable terahertz devices.

Composite Nature of Layered Hybrid Perovskites: Assessment on Quantum and Dielectric Confinements and Band Alignment

Layered hybrid organic-inorganic perovskites (HOPs) have re-emerged as potential technological solutions for next-generation photovoltaic and optoelectronic applications. Their two-dimensional (2D) nature confers them a significant flexibility and results in the appearance of quantum and dielectric confinements. Such confinements are at the origin of their fascinating properties, and understanding them from a fundamental level is of paramount importance for optimization. Here, we provide an in-depth investigation of band alignments of 2D HOP allowing access to carriers' confinement potentials. 2D HOPs are conceptualized as composite materials in which pseudoinorganic and -organic components are defined. In this way, computational modeling of band alignments becomes affordable using first-principles methods. First, we show that the composite approach is suitable to study the position-dependent dielectric profiles and enables clear differentiation of the respective contributions of inorganic and organic components. Then we apply the composite approach to a variety of 2D HOPs, assessing the impact on the confinement potentials of well and barrier thickness, of the nature of the inorganic well, and of structural transitions. Using the deduced potentials, we further discuss the limitations of the effective mass approximation, scrutinizing the electronic properties of this family of composite materials. Our simulations demonstrate type-I dominant band alignment in 2D HOPs. Finally, we outline design principles on band alignment toward achieving specific optoelectronic properties. Thus, we present alternative theoretical methods to inspect the properties of 2D hybrid perovskites and expect that the composite approach will be applicable to other classes of layered materials.