Long-lived efficient delayed fluorescence organic light-emitting diodes using n-type hosts

Efficient Microwave Irradiation-Assisted Synthesis of Benzodioxinoquinoxaline and Its Donor-Variegated Derivatives Enabling Long-Lived Emission and Efficient Bipolar Charge Carrier Transport

To enhance the usually low-charge carrier mobilities of highly twisted donor-acceptor-type compounds that exhibit thermally activated delayed fluorescence, we designed a rodlike acceptor benzodioxinoquinoxaline. This acceptor and two donor-acceptor-donor derivatives were synthesized via microwave Buchwald-Hartwig cross-coupling reactions with yields of up to 91%. The compounds exhibit three different types of photoluminescence, which is well-explained by quantum chemical calculations. Benzodioxinoquinoxaline shows blue fluorescence, with a very short lifetime of 0.64 ns. Its derivatives exhibit either green solid-state-enhanced thermally activated delayed fluorescence (SSE-TADF) or room-temperature phosphorescence (RTP) with lifetimes approaching 7 ms. When molecularly dispersed in a polymeric host, the compounds show a photoluminescence quantum yield close to 60%. The derivatives containing acridine or phenoxazine moieties exhibit bipolar charge transport. At an electric field of 5.8 × 105 V/cm, hole and electron mobilities of the phenoxazine-containing compound reach 3.2 × 10-4 and 1.5 × 10-4 cm2 V-1 s-1, respectively. Among the studied SSE-TADF-based organic light-emitting diodes, the device containing this compound shows the highest external quantum efficiency of 12.3% due to the good charge-transporting and SSE-TADF parameters of the emitter.

Boosting spontaneous orientation polarization of polar molecules based on fluoroalkyl and phthalimide units

Polar organic molecules form spontaneous polarization in vacuum-deposited films by permanent dipole orientations in the films, originating from the molecule's potential ability to align itself on the film surface during deposition. This study focuses on developing polar molecules that exhibit spontaneous orientation polarization (SOP) and possess a high surface potential. In the proposed molecular design, a hexafluoropropane (6F) unit facilitates spontaneous molecular orientation to align the permanent dipoles, and a phthalimide unit induces strong molecular polarization. Furthermore, the introduction of phthalimides into the molecular backbone raises the glass transition temperature of the molecules, leading to the suppression of molecular mobility on the film surface during film deposition and an improvement in the dipole orientation. The resulting surface potential slope is approximately 280 mV nm-1 without substrate temperature control. Furthermore, this work proposes a method using position isomers as a design strategy to tune the SOP polarity. The substitution position of the strong polar units influences the direction of the total molecular dipoles and affects the SOP polarity of the 6F-based molecules. The proposed molecular designs in this study provide wide tunability of the SOP intensity and polarity, which contributes to highly efficient organic optoelectronic and energy-harvesting devices.

Helically chiral multiresonant thermally activated delayed fluorescent emitters and their use in hyperfluorescent organic light-emitting diodes

Chiral multiresonant thermally activated delayed fluorescence (MR-TADF) materials show great potential as emitters in circularly polarized (CP) organic light-emitting diodes (CP-OLEDs) owing to their bright and narrowband CP emission. Here, two new chiral MR-TADF emitters tBuPh-BN and DPA-tBuPh-BN possessing intrinsically helical chirality have been synthesized and studied. The large steric interactions between the tert-butylphenyl groups not only induce the helical chirality but also provide a notable configurational stability to the enantiomers. Racemic mixtures of tBuPh-BN and DPA-tBuPh-BN show narrowband emission at 490 and 477 nm with full-width at half maximum (FWHM) of 25 and 28 nm and photoluminescence quantum yields, Φ PL, of 85 and 54% in toluene. The separated enantiomers of tBuPh-BN and DPA-tBuPh-BN show symmetric circularly polarized luminescence (CPL) with respective dissymmetry factors |g PL| values of 1.5 × 10-3 and 0.9 × 10-3. The hyperfluorescence organic light-emitting diodes (HF-OLEDs) with tBuPh-BN and DPA-tBuPh-BN acting as terminal emitters and 2,3,4,5,6-penta-(9H-carbazol-9-yl)benzonitrile (5CzBN) as their assistant dopant exhibited, respectively, maximum external quantum efficiencies (EQEmax) of 20.9 and 15.9% at 492 and 480 nm with FWHM of 34 and 38 nm. This work demonstrates a strategy for developing intrinsically helically chiral MR-TADF emitters possessing significant configurational stability, which can be used in HF-OLEDs.

Simultaneous control of carrier transport and film polarization of emission layers aimed at high-performance OLEDs

The orientation of a permanent dipole moment during vacuum deposition results in the occurrence of spontaneous orientation polarization (SOP). Previous studies reported that the presence of SOP in organic light-emitting diodes (OLEDs) lowers electroluminescence efficiency because electrically generated excitons are seriously quenched by SOP-induced accumulated charges. Thus, the SOP in a host:guest-based emission layer (EML) should be finely controlled. In this study, we demonstrate the positive effect of dipole-dipole interactions between polar host and polar emitter molecules on the OLED performance. We found that a small-sized polar host molecule that possesses both high molecular diffusivities and moderate permanent dipole moment, well cancels out the polarization formed by the SOP of the emitter molecules in the EML without a disturbance of the emitter molecules' intrinsic orientation, leading to high-performance of OLEDs. Our molecular design strategy will allow emitter molecules to pull out the full potential of the EMLs in OLEDs.

Impact of Spontaneous Orientational Polarization on Triplet-Triplet Upconversion-Based Blue Organic Light-Emitting Diodes

The spontaneous orientation polarization (SOP) of a permanent dipole moment of the molecule induces a giant surface potential (GSP) in an organic semiconductor film, and GSP is expected to be a crucial parameter for understanding the operational mechanism of organic light-emitting diodes (OLEDs). This study demonstrates that the voltage-dependent migration of a carrier recombination zone induced by a polar electron transporting layer (ETL) having a positive SOP causes a decline in the overall performance of the OLED in triplet-triplet upconversion (TTU) based on OLEDs. Specifically, the TTU efficiency in an OLED with 2,2',2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi) as the ETL decreased by 20% due to the reduction of electrically generated triplet exciton density. This decrease resulted in a lower external electroluminescence (EL) quantum efficiency (EQE) of 5.4% at 1 mA cm-2, while the OLED with a nonpolar ETL resulted in an EQE of around 8.1% at 1 mA cm-2. We confirmed a shift in the recombination zone from the current density dependence of the EL spectra in the OLEDs. Our results indicate that the fixed carrier recombination zone near a hole transport layer and an emitting layer (HTL/EML) strongly enhanced the TTU process, while the polar EML/ETL interface induced the migration of the recombination zone depending on voltage, resulting in the decrease of triplet exciton density.

Stable pure-green organic light-emitting diodes toward Rec.2020 standard

Manipulating dynamic behaviours of charge carriers and excitons in organic light-emitting diodes (OLEDs) is essential to simultaneously achieve high colour purity and superior operational lifetime. In this work, a comprehensive transient electroluminescence investigation reveals that incorporating a thermally activated delayed fluorescence assistant molecule with a deep lowest unoccupied molecular orbital into a bipolar host matrix effectively traps the injected electrons. Meanwhile, the behaviours of hole injection and transport are still dominantly governed by host molecules. Thus, the recombination zone notably shifts toward the interface between the emissive layer (EML) and the electron-transporting layer (ETL). To mitigate the interfacial carrier accumulation and exciton quenching, this bipolar host matrix could serve as a non-barrier functional spacer between EML/ETL, enabling the distribution of recombination zone away from this interface. Consequently, the optimized OLED exhibits a low driving voltage, promising device stability (95% of the initial luminance of 1000 cd m-2, LT95 > 430 h), and a high Commission Internationale de L'Éclairage y coordinate of 0.69. This indicates that managing the excitons through rational energy level alignment holds the potential for simultaneously satisfying Rec.2020 standard and achieving commercial-level stability.

Theoretical Insights into the Photophysical Properties of 4CzIPN Doped in Different Hosts: A Multiscale Study

As a typical thermally activated delayed fluorescence (TADF) emitter with green emission, 4CzIPN has attracted much attention recently. Most studies indicated that 4CzIPN doped in different hosts presented different performances; thus, the hosts should have an obvious influence on its photophysical properties. Herein, the influence of four kinds of hosts, including m-CzPym, m-CzTrz, p-CzPym, and p-CzTrz, on the photophysical properties of 4CzIPN is investigated. Molecular dynamics simulations were performed to simulate the host-guest conformations, and the photophysical properties were studied using the combined quantum mechanics/molecular mechanics method coupled with the thermal-vibration correlation function method. It is found that 4CzIPN in doped films has larger transition dipole moments and spin-orbital coupling constants compared to that in nondoped films. Faster radiative decay, intersystem crossing rates, and higher fluorescence efficiency could be obtained in doped films. Our work helps to better understand the photophysical properties of 4CzIPN in doped films and may favor the design of new hosts.

Recent advances in the design of afterglow materials: mechanisms, structural regulation strategies and applications

Afterglow materials are attracting widespread attention owing to their distinctive and long-lived optical emission properties which create exciting opportunities in various fields. Recent research has led to the discovery of many new afterglow materials featuring high photoluminescence quantum yields (PLQY) and lifetimes of up to several hours under ambient conditions. Afterglow materials are typically categorized according to their luminescence mechanism, such as long-persistent luminescence (LPL), room temperature phosphorescence (RTP), or thermally activated delayed fluorescence (TADF). Through rational design and novel synthetic strategies to modulate spin-orbit coupling (SOC) and populate triplet exciton states (T1), luminophores with long lifetimes and bright afterglow characteristics can be realized. Initial research towards afterglow materials focused mainly on pure inorganic materials, many of which possessed inherent disadvantages such as metal toxicity or low energy emissions. In recent years, organic-inorganic hybrid afterglow materials (OIHAMs) have been developed with high PLQY and long lifetimes. These hybrid materials exploit the tunable structure and easy processing of organic molecules, as well as enhanced SOC and intersystem crossing (ISC) processes involving heavy atom dopants, to achieve excellent afterglow performance. In this review, we begin by briefly discussing the structure and composition of inorganic and organic-inorganic hybrid afterglow materials, including strategies for regulating their lifetime, PLQY and luminescence wavelength. The specific advantages of organic-inorganic hybrid afterglow materials, including low manufacturing costs, diverse molecular/electronic structures, tunable structures and optical properties, and compatibility with a variety of substrates, are emphasized. Subsequently, we discuss in detail the fundamental mechanisms used by afterglow materials, their classification, design principles, and end applications (including sensing, anticounterfeiting, and photoelectric devices, among others). Finally, existing challenges and promising future directions are discussed, laying a platform for the design of afterglow materials for specific applications.

Highly efficient color-tunable organic co-crystals unveiling polymorphism, isomerism, delayed fluorescence for optical waveguides and cell-imaging

Photofunctional co-crystal engineering strategies based on donor-acceptor π-conjugated system facilitates expedient molecular packing, consistent morphology, and switchable optical properties, conferring synergic 'structure-property relationship' for optoelectronic and biological functions. In this work, a series of organic co-crystals were formulated using a twisted aromatic hydrocarbon (TAH) donor and three diverse planar acceptors, resulting in color-tunable solid and aggregated state emission via variable packing and through-space charge-transfer interactions. While, adjusting the strength of acceptors, a structural transformation into hybrid stacking modes ultimately results in color-specific polymorphs, a configurational cis-isomer with very high photoluminescence quantum yield. The cis-isomeric co-crystal exhibits triplet-harvesting thermally activated delayed fluorescence (TADF) characteristics, presenting a key discovery in hydrocarbon-based multicomponent systems. Further, 1D-microrod-shaped co-crystal acts as an efficient photon-transducing optical waveguides, and their excellent dispersibility in water endows efficient cellular internalization with bright cell imaging performances. These salient approaches may open more avenues for the design and applications of TAH based co-crystals.

Unraveling the Position Effect of Spiroxanthene-Based n-Type Hosts for High-Performance TADF-OLEDs

For developing high-performance organic light-emitting diodes (OLEDs) with thermally activated delayed fluorescent (TADF) emitters, the diphenyltriazine (TRZ) unit was introduced onto the 2'- and 3'-positions of xanthene moiety of spiro[fluorene-9,9'-xanthene] (SFX) to construct n-type host molecules, namely 2'-TRZSFX and 3'-TRZSFX. The outward extension of the TRZ unit, induced by the meta-linkage, resulted in a higher planarity between the TRZ unit and xanthene moiety in the corresponding 3'-TRZSFX. Additionally, this extension led to a perched T1 level, as well as a lower unoccupied molecular orbital (LUMO) level when compared with 2'-TRZSFX. Meanwhile, the 3'-TRZSFX molecules in the crystalline state presented coherent packing along with the interaction between TRZ units; the similar packing motif was spaced apart from xanthene moieties in the 2'-TRZSFX crystal. These endowed 3'-TRZSFX superior electron transport capacity in single-carrier devices relative to the 2'-TRZSFX-based device. Hence, the 3'-TRZSFX-based TADF-OLED showed remarkable electroluminescent (EL) performance under the operating luminance from turn-on to ca. 1000 cd·m-2 with a maximum external quantum efficiency (EQEmax) of 23.0%, thanks to its matched LUMO level with 4CzIPN emitter and better electron transport capacity. Interestingly, the 2'-TRZSFX-based device, with an EQEmax of 18.8%, possessed relatively low roll-off and higher efficiency when the operating luminance exceeded 1000 cd·m-2, which was attributed to the more balanced carrier transport under high operating voltage. These results were elucidated by the analysis of single-crystal structures and the measurements of single-carrier devices, combined with EL performance. The revealed position effect of the TRZ unit on xanthene moiety provides a more informed strategy to develop SFX-based hosts for highly efficient TADF-OLEDs.

Role of Linker Functionality in Polymers Exhibiting Main-Chain Thermally Activated Delayed Fluorescence

Excellent performance has been reported for organic light-emitting diodes (OLEDs) based on small molecule emitters that exhibit thermally activated delayed fluorescence. However, the necessary vacuum processing makes the fabrication of large-area devices based on these emitters cumbersome and expensive. Here, the authors present high performance OLEDs, based on novel, TADF polymers that can be readily processed from a solution. These polymers are based on the acridine-benzophenone donor-acceptor motif as main-chain TADF chromophores, linked by various conjugated and non-conjugated spacer moieties. The authors' extensive spectroscopic and electronic analysis shows that in particular in case of alkyl spacers, the properties and performance of the monomeric TADF chromophores are virtually left unaffected by the polymerization. They present efficient solution-processed OLEDs based on these TADF polymers, diluted in oligostyrene as a host. The devices based on the alkyl spacer-based TADF polymers exhibit external quantum efficiencies (EQEs) ≈12%, without any outcoupling-enhancing measures. What's more, the EQE of these devices does not drop substantially upon diluting the polymer down to only ten weight percent of active material. In contrast, the EQE of devices based on the monomeric chromophore show significant losses upon dilution due to loss of charge percolation.

A Thermally Activated Delayed Fluorescence Green OLED with 4500 h Lifetime and 20% External Quantum Efficiency by Optimizing the Emission Zone using a Single-Emission Spectrum Technique

Device optimization of light-emitting diodes (LEDs) targets the most efficient conversion of electrically injected charges into emitted light. The emission zone in an LED is where charges recombine and light is emitted from. It is believed that the emission zone is strongly linked to device efficiency and lifetime. However, the emission zone size is below the optical diffraction limit, so it is difficult to measure. An accessible method based on a single emission spectrum that enables emission zone measurements with sub-second time resolution is shown. A procedure is introduced to study and control the emission zone of an LED system and correlate it with device performance. A thermally activated delayed fluorescence organic LED emission zone is experimentally measured over all luminescing current densities, while varying the device structure and while ageing. The emission zone is shown to be finely controlled by emitter doping because electron transport via the emitter is the charge-transport bottleneck of the system. Suspected quenching/degradation mechanisms are linked with the emission zone changes, device structure variation, and ageing. Using these findings, a device with an ultralong 4500 h T₉₅ lifetime at 1000 cd m^-2 with 20% external quantum efficiency is shown.

Discrete palladium clusters that consist of two mutually bisecting perpendicular planes

The construction of novel molecules with unprecedented alignments of the constituent elements has revolutionized the field of functional materials. The arrangement of two or more planar subunits in a mutually perpendicular fashion is a frequently encountered approach to produce novel functional materials. Previous examples of such materials can be categorized into two well-investigated families: spiro-conjugated and dumbbell-shaped structures, wherein the two planes are aligned orthogonally via a single atom or an axis, respectively. This article describes a third family: reaction of [Pd(CN^tBu)₂]₃ with Sn₃Me₈ or Ge₆Me₁₂ afforded a Pd₇Sn₄ cluster and a Pd₈Ge₆ cluster that consist of two mutually bisecting perpendicular planes. In the Pd₇Sn₄ cluster, the two equivalent Pd₅Sn₂ planes share three palladium atoms that include a dihedral angle of 85.6°.

The construction of Pd₇Sn₄ and Pd₈Ge₆ clusters that consist of two mutually bisecting perpendicular planes was accomplished by the reaction of [Pd(CN^tBu)₂]₃ with Me₃Sn–SnMe₂–SnMe₃ or Ge₆Me₁₂.

Zero-Zero Energy-Dominated Degradation in Blue Organic Light-Emitting Diodes Employing Thermally Activated Delayed Fluorescence

Blue-emitting organic light-emitting diodes (OLEDs) fall significantly behind other OLEDs in operational stability. To better understand the key factors governing the stability of blue OLEDs employing thermally activated delayed fluorescence (TADF), nine efficient sky-blue to green TADF emitters with different frontier orbital energy levels and different TADF lifetimes have been designed and synthesized on the basis of charge-transfer (CT) acridine/phenyltriazine derivatives. Among them, ToDMAC-TRZ, a molecule composed of a 9,9-dimethyl-2,7-di-o-tolyl-9,10-dihydroacridine donor and a 2,4,6-triphenyl-1,3,5-triazine acceptor, shows a quantum yield of nearly 1 and a TADF lifetime as short as 0.59 μs in thin film. However, the stability of OLEDs is independent of the frontier orbital energy levels and TADF lifetime of the emitter. In contrast, the device half-life is found to decrease by five-sixths as the 0-0 energy of the singlet excitons increases by about 0.06 eV, which can be well-explained by the Arrhenius equation employing a photoreaction model. Whether in photoluminescence or electroluminescence, the contribution of long-lifetime triplet excitons to degradation is much lower than expected, which can be accounted for by how the solid-state solvation effect reduces the energy of the ³CT state and how most molecules have a low-lying locally excited triplet state.

Centimeter-scale hole diffusion and its application in organic light-emitting diodes

In conventional organic light-emitting diodes (OLEDs), current balance between electron and hole transport regions is typically achieved by leakage of the major carrier through the devices or by accumulation of the major carrier inside the devices. Both of these are known to reduce performances leading to reduction of efficiency and operation stability due to exciton-polaron annihilation, etc. We found that hole diffusion in a centimeter-scale can be achieved in a PEDOT:PSS layer via composition and interface engineering. This ultralong distance hole diffusion enables substantially enhanced hole diffusion current in the lateral direction perpendicular to the applied electric field in typical organic optoelectronic devices. By introducing this lateral hole diffusion layer (LHDL) at the anode side of OLEDs, reduced carrier accumulation, improved efficiency, and enhanced operation stability are demonstrated. The application of the LHDL provides a third strategy for current balancing with much reduced harmful effects from the previous two approaches.

In situ-formed tetrahedrally coordinated double-helical metal complexes for improved coordination-activated n-doping

In situ coordination-activated n-doping by air-stable metals in electron-transport organic ligands has proven to be a viable method to achieve Ohmic electron injection for organic optoelectronics. However, the mutual exclusion of ligands with high nucleophilic quality and strong electron affinity limits the injection efficiency. Here, we propose meta-linkage diphenanthroline-type ligands, which not only possess high electron affinity and good electron transport ability but also favour the formation of tetrahedrally coordinated double-helical metal complexes to decrease the ionization energy of air-stable metals. An electron injection layer (EIL) compatible with various cathodes and electron transport materials is developed with silver as an n-dopant, and the injection efficiency outperforms conventional EILs such as lithium compounds. A deep-blue organic light-emitting diode with an optimized EIL achieves a high current efficiency calibrated by the y colour coordinate (0.045) of 237 cd A-1 and a superb LT95 of 104.1 h at 5000 cd m-2.

Probing polaron-induced exciton quenching in TADF based organic light-emitting diodes

Polaron-induced exciton quenching in thermally activated delayed fluorescence (TADF)-based organic light-emitting diodes (OLEDs) can lead to external quantum efficiency (EQE) roll-off and device degradation. In this study, singlet-polaron annihilation (SPA) and triplet-polaron annihilation (TPA) were investigated under steady-state conditions and their relative contributions to EQE roll-off were quantified, using experimentally obtained parameters. It is observed that both TPA and SPA can lead to efficiency roll-off in 2,4,5,6-tetra(9H-carbazol-9-yl)isophthalonitrile (4CzIPN) doped OLEDs. Charge imbalance and singlet-triplet annihilation (STA) were found to be the main contributing factors, whereas the device degradation process is mainly dominated by TPA. It is also shown that the impact of electric field-induced exciton dissociation is negligible under the DC operation regime (electric field < 0.5 MV cm-1). Through theoretical simulation, it is demonstrated that improvement to the charge recombination rate may reduce the effect of polaron-induced quenching, and thus significantly decrease the EQE roll-off.

Theoretical studies on boron dimesityl-based thermally activated delayed fluorescence organic emitters: excited-state properties and mechanisms

At 300 K, S1 excitons could emit fluorescence or undergo ISC to T1, where rISC exceeds the phosphorescence emission enabling TADF.

Two-Channel Space Charge Transfer-Induced Thermally Activated Delayed Fluorescent Materials for Efficient OLEDs with Low Efficiency Roll-Off

Enhancing the reverse intersystem crossing (RISC) process of thermally activated delayed fluorescent (TADF) emitters is an effective approach to realize efficient organic light-emitting diodes (OLEDs) with low efficiency roll-off. In this work, we designed two novel TADF emitters, SAT-DAC and SATX-DAC, via a spiro architecture. Efficient maximum external quantum efficiencies (EQEs) of 22.6 and 20.9% with reduced efficiency roll-off (EQEs of 17.9 and 17.0% at 1000 cd m^-2) were achieved via a "two-RISC-channel" strategy. X-ray diffraction shows close donor (D)/acceptor (A) spacing and suitable D/A orientation in crystals of the two emitters favoring both intra- and intermolecular through-space charge transfer (TSCT) processes. Transient photoluminescence decay measurements show that both emitters have two RISC channels leading to k_ISC^T exceeding 10⁶ s^-1. These results suggest that the "two-RISC-channel" design can be a novel approach for enhancing performance of TADF emitters, in particular at high excitation densities.

High efficiency blue organic light-emitting diodes with below-bandgap electroluminescence

Blue organic light-emitting diodes require high triplet interlayer materials, which induce large energetic barriers at the interfaces resulting in high device voltages and reduced efficiencies. Here, we alleviate this issue by designing a low triplet energy hole transporting interlayer with high mobility, combined with an interface exciplex that confines excitons at the emissive layer/electron transporting material interface. As a result, blue thermally activated delay fluorescent organic light-emitting diodes with a below-bandgap turn-on voltage of 2.5 V and an external quantum efficiency (EQE) of 41.2% were successfully fabricated. These devices also showed suppressed efficiency roll-off maintaining an EQE of 34.8% at 1000 cd m⁻². Our approach paves the way for further progress through exploring alternative device engineering approaches instead of only focusing on the demanding synthesis of organic compounds with complex structures.

Thermally activated delayed fluorescence organic light-emitting diodes (TADF-OLEDs) rely on high triplet energy interlayers to confine excitons, which results in reduced performance. Here, the authors report high-performance blue TADF-OLEDs with below bandgap electroluminescence.

Nematic Triphenyltriazine Triesters and the Induction of the Columnar Mesophase by Fluorine Substitution

Whereas their para homologs are not mesogenic, the disk-shaped triphenyltriazine meta-trialkylesters obtained via trimerization of 3-cyanobenzoic alkylester, which are configurationally more flexible, exhibit a monotropic nematic mesophase. Introduction of fluorine atoms into the alkyl chains or into the phenyl moieties leads to the appearance of an enantiotropic columnar mesophase. If fluorine is introduced both in the chains and in the phenyl moieties, only a monotropic mesophase remains. Fluorination of either the alkyl chains or the aromatic core, but not both, appears thus as a simple means of inducing or stabilizing columnar self-assembly in disk-shaped systems. As the homeotropically alignable columnar mesophase can thus be made to persist at room temperature, as energies higher than 3 eV of the first excited triplet state are computed in agreement with the value reported for the parent arene, and as they are not fluorescent themselves, these compounds are of promise as aligning host matrices for blue-emitting TADF devices with improved light outcoupling. Dilution of a columnar with a nonmesogenic homolog induces the nematic state, indicating that the nanoscopic make-up of both mesophases is closely related.

Unravelling the electron injection/transport mechanism in organic light-emitting diodes

Although significant progress has been made in the development of light-emitting materials for organic light-emitting diodes along with the elucidation of emission mechanisms, the electron injection/transport mechanism remains unclear, and the materials used for electron injection/transport have been basically unchanged for more than 20 years. Here, we unravelled the electron injection/transport mechanism by tuning the work function near the cathode to about 2.0 eV using a superbase. This extremely low-work function cathode allows direct electron injection into various materials, and it was found that organic materials can transport electrons independently of their molecular structure. On the basis of these findings, we have realised a simply structured blue organic light-emitting diode with an operational lifetime of more than 1,000,000 hours. Unravelling the electron injection/transport mechanism, as reported in this paper, not only greatly increases the choice of materials to be used for devices, but also allows simple device structures.

Understanding the role electron injection and transport in organic light-emitting diodes (OLED) is critical for optimizing device performance. Here, the authors elucidate the electron injection/transport mechanism in OLEDs and identify the cathode/emissive layer energy barrier as the key factor.

π-Extended Carbazole Derivatives as Host Materials for Highly Efficient and Long-Life Green Phosphorescent Organic Light-Emitting Diodes

High-performance organic light-emitting diodes (OLEDs) that use phosphorescent and/or thermally activated delayed fluorescence emitters are capable of realizing 100 % electron-to-photon conversion. The host materials in these OLEDs play crucial roles in determining OLED performance. Carbazole derivatives are frequently used as host materials, among which 3,3-bis(9H-carbazol-9-yl)biphenyl (mCBP) is often used for lifetime testing in scientific studies. In this study, the π conjugation of the carbazole unit was expanded to enhance OLED lifetime by designing and developing two benzothienocarbazole (BTCz)-based host materials, namely m1BTCBP and m4BTCBP. Among these host materials, m1BTCBP formed a highly efficient [Ir(ppy)₃ ]-based OLED with an operational luminescence half-life (LT₅₀ ) of over 300 h at an initial luminance of approximately 12000 cd m^-2 (current density: 25 mA cm^-2 ). The LT₅₀ value at 1000 cd cm^-2 was estimated to be about 23 000 h. This performance is clearly higher than that of mCBP-based OLEDs (LT₅₀ ≈8500 h).

Modeling Electron-Transfer Degradation of Organic Light-Emitting Devices

The operational lifetime of organic light-emitting devices (OLEDs) is governed primarily by the intrinsic degradation of the materials. Therefore, a chemical model capable of predicting the operational stability is highly important. Here, a degradation model for OLEDs that exhibit thermally activated delayed fluorescence (TADF) is constructed and validated. The degradation model involves Langevin recombination of charge carriers on hosts, followed by the generation of a polaron pair through reductive electron transfer from a dopant to a host exciton as the initiation steps. The polarons undergo spontaneous decomposition, which competes with ultrafast recovery of the intact materials through charge recombination. Electrical and spectroscopic investigations provide information about the kinetics of each step in the operation and degradation of the devices, thereby enabling the building of mass balances for the key species in the emitting layers. Numerical solutions enable predictions of temporal decreases of the dopant concentration in various TADF emitting layers. The simulation results are in good agreement with experimental operational stabilities. This research disentangles the chemical processes in intrinsic electron-transfer degradation, and provides a useful foundation for improving the longevity of OLEDs.

Thermally activated delayed fluorescence exciplex emitters for high-performance organic light-emitting diodes

Owing to their natural thermally activated delayed fluorescence (TADF) characteristics, the development of exciplex emitters for organic light-emitting diodes (OLEDs) has witnessed booming progress in recent years. Formed between electron-donating and electron-accepting molecules, exciplexes with intermolecular charge transfer processes have unique advantages compared with unimolecular TADF materials, offering a new way to develop high-performance TADF emitters. In this review, a comprehensive overview of TADF exciplex emitters is presented with a focus on the relationship between the constituents of exciplexes and their electroluminescence performance. We summarize and discuss the latest and most significant developments of TADF exciplex emitters. Notably, the design principles of efficient TADF exciplex emitters are systematically categorized into three systems within this review. These progressive achievements of TADF exciplex emitters point out future challenges to trigger more research endeavors in this growing field.

Asymmetric Host Molecule Bearing Pyridine Core for Highly Efficient Blue Thermally Activated Delayed Fluorescence OLEDs

In this study, two host materials, pCzBzbCz and pCzPybCz, are synthesized to achieve a high efficiency and long lifetime of blue thermally activated delayed fluorescence organic light-emitting diodes (TADF-OLEDs). The molecular design strategy involves the introduction of a pyridine group into the core structure of pCzPybCz as an electron-withdrawing unit, and an electron-donating phenyl group into the structure of pCzBzbCz. These host materials demonstrate good thermal stability and high triplet energy (T₁ =3.07 eV for pCzBzbCz and 3.06 eV for pCzPybCz) for the fabrication of blue TADF-OLEDs. In particular, pCzPybCz-based OLED devices demonstrate an external quantum efficiency (EQE) of 22.7 % and an operational lifetime of 24 h (LT₉₀ , time to attain 90 % of initial luminance) at an initial luminance of 1000 cd m^-2 . This superior lifetime could be explained by the C-N bond dissociation energy (BDE) in the host molecular structure. Furthermore, a mixed-host system using the electron-deficient 2,4-bis(dibenzo[b,d]furan-2-yl)-6-phenyl-1,3,5-triazine (DDBFT) is proposed to inhibit the formation of the anion state of our host materials. In short, the device operational lifetime is further improved by applying DDBFT. The carbazole-based asymmetric host molecule containing a pyridine core realizes a high-efficiency blue TADF-OLED showing a positive effect on the operating lifetime, and can provide useful strategies for designing new host materials.

Highly Efficient Thermally Activated Delayed Fluorescence via an Unconjugated Donor-Acceptor System Realizing EQE of Over 30

In this work, two novel thermally activated delayed fluorescence (TADF) emitters, 2tDMG and 3tDMG, are synthesized for high-efficiency organic light-emitting diodes (OLEDs), The two emitters have a tilted face-to-face alignment of donor (D)/acceptor (A) units presenting intramolecular noncovalent interactions. The two TADF materials are deposited either by an evaporation-process or by a solution-process, both of them leading to high OLED performance. 2tDMG used as the emitter in evaporation-processed OLEDs achieves a high external quantum efficiency (EQE) of 30.8% with a very flat efficiency roll-off of 7% at 1000 cd m^-2 . The solution-processed OLEDs also display an interesting EQE of 16.2%. 3tDMG shows improved solubility and solution processability as compared to 2tDMG, and thus a high EQE of 20.2% in solution-processed OLEDs is recorded. The corresponding evaporation-processed OLEDs also reach a reasonably high EQE of 26.3%. Encouragingly, this work provides a novel strategy to address the imperious demands for OLEDs with high EQE and low roll-off.

Atomic Precision Graphene Model Compound for Bright Electrochemiluminescence and Organic Light-Emitting Diodes

An N-annulated perylene diimide dimer, tPDI₂N-hex, a graphene model compound with atomic precision, was investigated for luminescence applications. Electrochemiluminescence (ECL) of tPDI₂N-hex was studied with tri-n-propylamine (TPrA) as a reducing coreactant. ECL-voltage curves along with spooling ECL spectra provided details of light generation mechanisms. The relative ECL quantum efficiency of the Ru(bpy)₃(PF₆)₂/TPrA system was calculated to be 64%, which is superior to that of many other organic molecules because of the desired excited state in the absence of surface states. An organic light-emitting diode (OLED) fabricated with tPDI₂N-hex displayed bright orange-red emission with a low color temperature, which is very desirable. It is plausible that the sterically constrained and thus orthogonal aromatic moieties in the tPDI₂N-hex structure, with atomic precision graphene layer characteristics, lead to the excellent luminescence performances. The ECL and OLED studies of tPDI₂N-hex showcase great application potentials of tPDI₂N-hex in both solution-based ECL probes and solid-state light devices.

Precise Exciton Management of Quaternary Emission Layers for Highly Stable Organic Light-Emitting Diodes Based on Thermally Activated Delayed Fluorescence

Simultaneous achievement of both high electroluminescence efficiency and high operational stability in organic light-emitting diodes (OLEDs) is required for their use in various practical applications. Although OLEDs based on thermally activated delayed fluorescence-assisted fluorescence (TAF) are considered to possess a promising device architecture to exploit the full potential of OLEDs, the operational stability of such systems still requires further improvement. In this study, a quaternary emission layer consisting of a combination of TAF and mixed-host systems is developed. OLEDs containing this emission layer show improved operational stability through the management of exciton generation processes while maintaining high electroluminescence efficiency. Furthermore, a gradient of the mixed ratio of the co-host matrix is used to optimize the recombination zone profile in the emission layer, leading to 17 times improvement of the operational lifetime compared with that of the corresponding single-host-based device. This research provides a simple and general method to develop highly stable TAF-OLEDs.

A π-D and π-A Exciplex-Forming Host for High-Efficiency and Long-Lifetime Single-Emissive-Layer Fluorescent White Organic Light-Emitting Diodes

Exciplex-forming hosts with thermally activated delayed fluorescence (TADF) provide a viable opportunity to unlock the full potential of the yet-to-be improved power efficiencies (PEs) and stabilities of all-fluorescent white organic light-emitting diodes (WOLEDs), but this, however, is hindered by the lack of stable blue exciplexes. Here, an advanced exciplex system is proposed by incorporating bipolar charge-transport π-spacers into both the electron-donor (D) and the electron-accepter (A) to increase their distance for hypsochromic-shifted emission while maintaining the superior transporting ability. By using spirofluorene as the π-spacer, 3,3'-bicarbazole as the D-unit, and 2,4,6-triphenyl-1,3,5-triazine as the A-unit, a π-D and π-A exciplex with sky-blue emission and fast reverse intersystem crossing process is thereof constructed. Combining this exciplex-forming host, a blue TADF-sensitizer, and a yellow conventional fluorescent dopant in a single-emissive-layer, the fabricated warm-white-emissive device simultaneously exhibits a low driving voltage of 3.08 V, an external quantum efficiency of 21.4%, and a remarkable T80 (time to 80% of the initial luminance) of >8200 h at 1000 cd m^-2 , accompanied by a new benchmark PE of 69.6 lm W^-1 among all-fluorescent WOLEDs.

Understanding coordination reaction for producing stable electrode with various low work functions

The realisation of a cathode with various work functions (WFs) is required to maximise the potential of organic semiconductors that have various electron affinities. However, the barrier-free contact for electrons could only be achieved by using reactive materials, which significantly reduce the environmental stability of organic devices. We show that a stable electrode with various WFs can be produced by utilising the coordination reaction between several phenanthroline derivatives and the electrode. Although the low WF of the electrode realised by using reactive materials is specific to the material, the WF of the phenanthroline-modified electrode is tunable depending on the amount of electron transfer associated with the coordination reaction. A phenanthroline-modified electrode that has a higher electron injection efficiency than lithium fluoride has been demonstrated. The observation of various WFs induced by the coordination reaction affords strategic perspectives on the development of stable cathodes unique to organic electronics.

Despite recent studies aimed at realizing efficient charge injection and collection in organic electronics, developing stable organic injection materials remains a challenge. Here, the authors report phenanthroline derivative-based materials for improved charge injection in organic devices.

Identification of host-guest systems in green TADF-based OLEDs with energy level matching based on a machine-learning study

Booming progress has been made in both the molecular design concept and the fundamental electroluminescence (EL) mechanism of thermally activated delayed fluorescence (TADF)-based organic light-emitting diodes (OLEDs) in recent years. One of the requirements for TADF-based OLEDs having high external quantum efficiency (EQE) is the favorable energy level alignment between the host and the guest to promote the energy transfer and improve the carrier balance. However, strategies to optimize the TADF-based OLED performance by selecting suitable host-guest systems in the light-emitting layer are far from enough. In this work, we investigated guest-host systems through the use of two machine-learning approaches (feature-based and similarity-based algorithms) from our recent effort for the optimization of TADF-based OLEDs. The Random Forest (RF) algorithm based on the features of electronic and photo-physical properties can accurately predict the EQE of green TADF-based OLEDs with average correlation coefficients of R2 = 0.85 for the training set and R2 = 0.74 for the testing set. Also, the Support Vector Regression (SVR) algorithm based on similarity metrics between pairs of materials (e.g., host and guest) in terms of electronic parameters can provide reasonable device performance prediction (R2 = 0.72) through the optimization procedure of the parameters. These results show that the predictive capability and model applicability of both machine-learning models can be used to identify suitable host-guest systems and explore complex relationships in green TADF-based OLEDs.

High Fluorescence Rate of Thermally Activated Delayed Fluorescence Emitters for Efficient and Stable Blue OLEDs

A lack of an efficient and stable blue device is a critical factor restricting the development of organic light-emitting diode (OLED) technology that is currently expected to be overcome by employing thermally activated delayed fluorescence (TADF). Here, we investigate the TADF and electroluminescence (EL) performance of six carbazole/triphenyltriazine derivatives in different hosts. A good linearity between lg(LT50/k_F²) and the EL emission wavelength is found, where LT50 is the half-life of the devices and k_F is the fluorescence rate of the emitters, suggesting the dominance of the singlet exciton energy and lifetime in device stability. An indolylcarbazole/triphenyltriazine derivative (ICz-TRZ) with the capability to suppress solid-state solvation exhibits blue-shifted emission and an increased k_F (1.5 × 10⁸ s^-1) in comparison to the control emitters in doped films. ICz-TRZ-based devices achieve a maximum external quantum efficiency (EQE) of 18% and an EQE of 5.5% at a very high luminance of 7 × 10⁴ cd/m². Ignoring the poor electrochemical stability of ICz-TRZ, the device offers an LT50 approaching 100 h under an initial luminance of 1000 cd/m² and CIE coordinates of (0.14, 0.19). The findings in this work suggest that computer-aided design of high k_F TADF emitters can be an approach to realize efficient and stable blue OLEDs.

Weakly Conjugated Phosphine Oxide Hosts for Efficient Blue Thermally Activated Delayed Fluorescence Organic Light-Emitting Diodes

The development of host materials with high first-triplet state (T₁) energy and high charge mobility is a key to achieve efficient true-blue organic light-emitting diodes (OLEDs), employing phosphorescence and thermally activated delayed fluorescence (TADF). An ether-bridged double triphenylphosphine oxide (TPPO) compound, bis(2-(diphenylphosphino)phenyl)ether oxide (DPEPO), was reported to have a very high T₁ energy of 3.3 eV but suffers from poor charge mobility. Here, five bridge-controlled multi-TPPO derivatives were studied through a combination of experiments and theory. We demonstrate that the push-pull electron capability of the bridge group governs the T₁ energy and electron mobility of these materials. Replacing the ether bridge by a bis(trifluoromethyl)methylene group can reduce the energy barrier for intramolecular electron exchange and consequently enhance the electron mobility by two orders of magnitude without lowering the T₁ energy. A blue TADF OLED employing this bis(trifluoromethyl)methylene-bridged compound achieves the same high external quantum efficiency but a much higher current density compared to the control device employing DPEPO. In contrast, a bridge group with strong electron-withdrawing capability, such as phosphine oxygen or sulfone, lowers the T₁ energy of the compound by enhancing the electronic coupling between TPPO subunits and inhibits intermolecular electron transfer by trapping the electron charge around the bridge.

Conformation-dependent degradation of thermally activated delayed fluorescence materials bearing cycloamino donors

Organic light-emitting devices (OLEDs) containing organic molecules that exhibit thermally activated delayed fluorescence (TADF) produce high efficiencies. One challenge to the commercialization of the TADF OLEDs that remains to be addressed is their operational stability. Here we investigate the molecular factors that govern the stability of various archetypal TADF molecules based on a cycloamino donor-acceptor platform. Our results reveal that the intrinsic stability depends sensitively on the identity of the cycloamino donors in the TADF compounds. The rates and photochemical quantum yields of the degradation are positively correlated with the operation lifetimes of the devices. Our research shows that the stability is governed by the conformeric heterogeneity between the pseudo-axial and pseudo-equatorial forms of the cycloamino donor. Spontaneous bond dissociation occurs in the former (i.e., the pseudo-axial form), but the cleavage is disfavored in the pseudo-equatorial form. These findings provide valuable insights into the design of stable TADF molecules.

Management of Delayed Fluorophor-Sensitized Exciton Harvesting for Stable and Efficient All-Fluorescent White Organic Light-Emitting Diodes

White organic light-emitting diodes (WOLEDs) using thermally activated delayed fluorescence (TADF)-based single emissive layer (SEL) have attracted enormous attention because of their simple device structure and full exciton utilization potential for high efficiency. However, WOLEDs made of an all-TADF SEL usually exhibit serious efficiency roll-off and poor color stability due to serious exciton-annihilation and unbalanced radiative decays of different TADF emitters. Herein, a new strategy is proposed to manipulate the TADF-sensitized fluorescence process by combining dual-host systems of high triplet energy with a conventional fluorescent emitter of complementary color. The multiple energy-funneling paths are modulated and short-range Dexter energy transfer is largely suppressed due to the steric effect of peripheral tert-butyl group in the blue TADF sensitizer. The resulting all-fluorescent WOLEDs achieve an unprecedentedly high external quantum efficiency of 21.8% with balanced white emission of Commission Internationale de l'Eclairage coordinate of (0.292, 0.343), accompanied with good color stability, reduced efficiency roll-off, and prolonged operational lifetime. These findings demonstrate the validity of this strategy for precisely allocating the exciton harvesting in SEL WOLEDs.

The Role of Reverse Intersystem Crossing Using a TADF-Type Acceptor Molecule on the Device Stability of Exciplex-Based Organic Light-Emitting Diodes

Exciplex system exhibiting thermally activated delayed fluorescence (TADF) holds a considerable potential to improve organic light-emitting diode (OLED) performances. However, the operational lifetime of current exciplex-based devices, unfortunately, falls far behind the requirement for commercialization. Herein, rationally choosing a TADF-type electron acceptor molecule is reported as a new strategy to enhance OLEDs' operating lifetime. A comprehensive study of the exciplex system containing 9,9',9''-triphenyl-9H,9'H,9''H-3,3':6',3''-tercarbazole (Tris-PCz) and triazine (TRZ) derivatives clarifies the relationship between unwanted carrier recombination on acceptor molecules, TADF property of acceptors, and the device degradation event. By employing a proposed "exciton recycling" strategy, a threefold increased operational lifetime can be achieved while still maintaining high-performance OLED properties. In particular, a stable blue OLED that employs this strategy is successfully demonstrated. This research provides an important step for exciplex-based devices toward the significant improvement of operational stability.

Mixed-Host Systems with a Simple Device Structure for Efficient Solution-Processed Organic Light-Emitting Diodes of a Red-Orange TADF Emitter

Charge balance, concentration quenching, and exciton confinement are the most important factors for realizing the use of thermally activated delayed fluorescence (TADF) emitters for organic light-emitting diodes. Red-orange organic light-emitting diodes of a TADF emitter 2-[4 (diphenylamino)phenyl]-10,10-dioxide-9H-thioxanthen-9-one (TXO-TPA) have been reported by doping in a mixed p-type host system of poly(N-vinylcarbazole) (PVK) and 1,3-bis(N-carbazolyl)benzene (mCP) via solution-processed. We have demonstrated the peak external quantum efficiency of 9.75%, maximum current efficiency of 19.36 cd/A, and power efficiency of 12.17 lm/W along with a CIE coordinate of (0.45, 0.51). The devices were compared with different doping concentrations of TXO-TPA, and a comparative investigation on the effect of the thickness electron transport layer was studied. The results clearly indicated that this solution-processed TXO-TPA device structure is a promising strategy to develop highly efficient but simple OLED structures.

Efficient and Stable Organic Light-Emitting Diodes Employing Indolo[2,3-b]indole-Based Thermally Activated Delayed Fluorescence Emitters

Triplet excitons can be effectively harvested in organic light-emitting diodes employing thermally activated delayed fluorescence (TADF) molecules as the emitter and host. A design strategy for blue and green emitters with small S₁-T₁ splitting (ΔE_ST) is to construct a donor-acceptor (D-A) type molecule with moieties combining a high T₁ level with a strong electron-donating/withdrawing character. Here, we report a new kind of TADF emitter with an indolo[2,3-b]indole (IDID) donor. In comparison to other reported indolocarbazole and indoloindole donors, IDID has a higher T₁ level, which is comparable to that of the classical donor 9,9-dimethyl-9,10-dihydroacridine (DMAC) for blue TADF emitters. The sky-blue and green TADF emitters based on the IDID donor and a phenyltriazine acceptor exhibit high photoluminescence quantum yields (0.78-0.92) and short TADF lifetimes (1.1-1.7 μs) in doped films. Devices employing these IDID-based emitters offer an external quantum efficiency of 19.2%, which is comparable to that obtained for a device employing an analogous compound with a DMAC donor, while the stability of the former is higher than that of the latter owing to the just-right D-A twisting angles (∼59°) in the IDID-based emitters leading to a balance between ΔE_ST and the fluorescence rate. The utilization of host materials with a similar polarity to the emitter is found to be an effective strategy to improve device stability.

High-Performance Nondoped Blue Delayed Fluorescence Organic Light-Emitting Diodes Featuring Low Driving Voltage and High Brightness

Thermally activated delayed fluorescence (TADF) provides great potential for the realization of efficient and stable organic light-emitting diodes (OLEDs). However, it is still challenging for blue TADF emitters to simultaneously achieve high efficiency, high brightness, and low Commission Internationale de l'Eclairage (CIE) y coordinate (CIEy) value. Here, the design and synthesis of two new benzonitrile-based TADF emitters (namely 2,6-di(9H-carbazol-9-yl)-3,5-bis(3,6-diphenyl-9H-carbazol-9-yl)benzonitrile (2PhCz2CzBn) and 2,6-di(9H-carbazol-9-yl)-3,5-bis(3,6-di-tert-butyl-9H-carbazol-9-yl)benzonitrile (2tCz2CzBn)) with a symmetrical and rigid heterodonor configuration are reported. The TADF OLEDs doped with both the emitters can achieve a high external quantum efficiency (EQE) over 20% and narrowband blue emission of 464 nm with a CIEy < 0.2. Moreover, the incorporation of a terminal tert-butyl group can weaken the intermolecular π-π stacking in the nondoped TADF emitter, and thus significantly suppress self-aggregation-caused emission quenching for enhanced delayed fluorescence. A peak EQE of 21.6% is realized in the 2tCz2CzBn-based nondoped device with an extremely low turn-on voltage of 2.7 V, high color stability, a high brightness over 20 000 cd m-2, a narrow full-width at half-maximum of 70 nm, and CIE color coordinates of (0.167, 0.248).

Approaches for Long Lifetime Organic Light Emitting Diodes

Organic light emitting diodes (OLEDs) have been well known for their potential usage in the lighting and display industry. The device efficiency and lifetime have improved considerably in the last three decades. However, for commercial applications, operational lifetime still lies as one of the looming challenges. In this review paper, an in-depth description of the various factors which affect OLED lifetime, and the related solutions is attempted to be consolidated. Notably, all the known intrinsic and extrinsic degradation phenomena and failure mechanisms, which include the presence of dark spot, high heat during device operation, substrate fracture, downgrading luminance, moisture attack, oxidation, corrosion, electron induced migrations, photochemical degradation, electrochemical degradation, electric breakdown, thermomechanical failures, thermal breakdown/degradation, and presence of impurities within the materials and evaporator chamber are reviewed. Light is also shed on the materials and device structures which are developed in order to obtain along with developed materials and device structures to obtain stable devices. It is believed that the theme of this report, summarizing the knowledge of mechanisms allied with OLED degradation, would be contributory in developing better-quality OLED materials and, accordingly, longer lifespan devices.