Growth of magnetic nanowires along freely selectable 〈hkl〉 crystal directions

Crystal orientation-dependent tensile mechanical behavior and deformation mechanisms of zinc-blende ZnSe nanowires

Crystal deformation mechanisms and mechanical behaviors in semiconductor nanowires (NWs), in particular ZnSe NWs, exhibit a strong orientation dependence. However, very little is known about tensile deformation mechanisms for different crystal orientations. Here, the dependence of crystal orientations on mechanical properties and deformation mechanisms of zinc-blende ZnSe NWs are explored using molecular dynamics simulations. We find that the fracture strength of [111]-oriented ZnSe NWs shows a higher value than that of [110] and [100]-oriented ZnSe NWs. Square shape ZnSe NWs show greater value in terms of fracture strength and elastic modulus compared to a hexagonal shape at all considered diameters. With increasing temperature, the fracture stress and elastic modulus exhibit a sharp decrease. It is observed that the {111} planes are the deformation planes at lower temperatures for the [100] orientation; conversely, when the temperature is increased, the {100} plane is activated and contributes as the second principal cleavage plane. Most importantly, the [110]-directed ZnSe NWs show the highest strain rate sensitivity compared to the other orientations due to the formation of many different cleavage planes with increasing strain rates. The calculated radial distribution function and potential energy per atom further validates the obtained results. This study is very important for the future development of efficient and reliable ZnSe NWs-based nanodevices and nanomechanical systems.

Colloidal Synthesis of γ-MnS Nanorods with Uniform Controlled Size and Pure ⟨002⟩ Growth Direction

One dimensional (1D) compound semiconductor nanostructures have unique anisotropic optical, electrical, and physical properties. Synthesis of large scale 1D nanostructures with pure crystallographic growth direction by a colloidal route and finding an easy method to prove it were significant for further exploring their unique anisotropic properties. Additionally, MnS is one of the most important optoelectronic and magnetic semiconductors. Herein, the large scale γ-MnS nanorods with completely pure ⟨002⟩ growth direction were first synthesized and convinced by solid evidence using the X-ray diffraction method. Compared with the standard diffraction pattern of γ-MnS powder, the ⟨002⟩ oriented long γ-MnS nanorods showed only the (100),(110), (200), and (210) peaks while other diffraction peaks disappeared. This study opened a door for the synthesis of the 1D colloidal nanostructures with pure crystallographic growth direction at large scale, benefiting the manufacture of a novel apparatus based on their anisotropic properties.

Novel Tunnel Magnetoresistive Sensor Functionalities via Oblique-Incidence Deposition

Controlling the magnetic properties of ultrathin films remains one of the main challenges to the further development of tunnel magnetoresistive (TMR) device applications. The magnetic response in such devices is mainly governed by extending the primary TMR trilayer with the use of suitable contact materials. The transfer of magnetic anisotropy to ferromagnetic electrodes consisting of CoFeB layers results in a field-dependent TMR response, which is determined by the magnetic properties of the CoFeB as well as the contact materials. We flexibly apply oblique-incidence deposition (OID) to introduce arbitrary intrinsic in-plane anisotropy profiles into the magnetic layers. The OID-induced anisotropy shapes the magnetic response and eliminates the requirement of additional magnetic contact materials. Functional control is achieved via an adjustable shape anisotropy that is selectively tailored for the ultrathin CoFeB layers. This approach circumvents previous limitations on TMR devices and allows for the design of new sensing functionalities, which can be precisely customized to a specific application, even in the high field regime. The resulting sensors maintain the typical TMR signal strength as well as a superb thermal stability of the tunnel junction, revealing a striking advantage in functional TMR design using anisotropic interfacial roughness.

Branching of Titanium Nanorods

One dimensional titanium nanorod structures formed by glancing angle physical vapor deposition have branches while other hexagonal closed packed metals do not. Based on physical vapor deposition and characterizations using electron microscopy and X-ray diffraction, this paper reports that Ti nanorod branching occurs at a low homologous temperature of 0.28. The side surface of the nanorods consists of {101¯1} facets arranged in a zigzag shape. Further, branches form on the {101¯1} side facets that are parallel to the deposition flux. The length of the branches increases as they are farther away from the nanorod top and tend to reach a constant. The top surface facet of Ti nanorods is {0001} and that of the branches is {101¯1}. The insight into conditions for branching, together with the determination of the morphology and crystal orientation of the branches, lay the foundation for further studies of branching mechanisms and driving force.

Tuning domain wall dynamics by shaping nanowires cross-sections

The understanding of the domain wall (DW) dynamics along magnetic nanowires is crucial for spintronic applications. In this work, we perform a detailed analysis of the transverse DW motion along nanowires with polygonal cross-sections. If the DW displaces under a magnetic field above the Walker limit, the oscillatory motion of the DW is observed. The amplitude, the frequency of oscillations, and the DW velocity depend on the number of sides of the nanowire cross-section, being the DW velocity in a wire with a triangular cross-section one order of magnitude larger than that in a circular nanowire. The decrease in the nanowire cross-section area yields a DW behavior similar to the one presented in a cylindrical nanowire, which is explained using an analytical model based on the general kinetic momentum theorem. Micromagnetic simulations reveal that the oscillatory behavior of the DW comes from energy changes due to deformations of the DW shape during the rotation around the nanowire.

Magnetic nanowires in biomedical applications

Magnetic nanostructures and nanomaterials play essential roles in modern bio medicine and technology. Proper surface functionalization of nanoparticles (NPs) allows the selective bonding thus application of magnetic forces to a vast range of cellular structures and biomolecules. However, the spherical geometry of NPs poises a series of limitations in various potential applications. Mostly, typical spherical core shell structure consists of magnetic and non-magnetic layers have little tunability in terms of magnetic responses, and their single surface functionality also limits chemical activity and selectivity. In comparison to spherical NPs, nanowires (NWs) possess more degrees of freedom in achieving magnetic and surface chemical tenability. In addition to adjustment of magnetic anisotropy and inter-layer interactions, another important feature of NWs is their ability to combine different components along their length, which can result in diverse bio-magnetic applications. Magnetic NWs have become the candidate material for biomedical applications owing to their high magnetization, cheapness and cost effective synthesis. With large magnetic moment, anisotropy, biocompatibility and low toxicity, magnetic NWs have been recently used in living cell manipulation, magnetic cell separation and magnetic hyperthermia. In this review, the basic concepts of magnetic characteristics of nanoscale objects and the influences of aspect ratio, composition and diameter on magnetic properties of NWs are addressed. Some underpinning physical principles of magnetic hyperthermia (MH), magnetic resonance imaging (MRI) and magnetic separation (MS) have been discussed. Finally, recent studies on magnetic NWs for the applications in MH, MRI and MS were discussed in detail.

General Nanomolding of Ordered Phases

Large-scale, controlled fabrication of ordered phases is challenging at the nanoscale, yet highly demanded as their well-ordered structure and chemistry is the key for advanced functionality. Here, we demonstrate a general nanomolding process of ordered phases based on atomic diffusion. Resulting nanowires are single crystals and maintain their composition and structure throughout their length, which we explain by a self-ordering process originating from their narrow Gibbs free energy. The versatility, control, and precision of this thermomechanical nanomolding method of ordered phases provides new insights into single crystal growth and suggest itself as a technology to enable wide spread usage for nanoscale and quantum devices.