Hydrodynamic assembly of two-dimensional layered double hydroxide nanostructures

Application of Bimetallic Hydroxide/Graphene Composites in Wastewater Treatment

The increasing discharge of antibiotic wastewater leads to increasing water pollution. Most of these antibiotic wastewaters are persistent, strongly carcinogenic, easy to bioaccumulate, and have other similar characteristics, seriously jeopardizing human health and the ecological environment. As a commonly used wastewater treatment technology, non-homogeneous electro-Fenton technology avoids the hazards of H2O2 storage and transportation as well as the loss of desorption and reabsorption. It also facilitates electron transfer on the electrodes and the reduction of Fe3+ on the catalysts, thereby reducing sludge production. However, the low selectivity and poor activity of electro-synthesized H2O2, along with the low concentration of its products, combined with the insufficient activity of electrically activated H2O2, results in a low ∙OH yield. To address the above problems, composites of layered bimetallic hydroxides and carbon materials were designed and prepared in this paper to enhance the performance of electro-synthesized H2O2 and non-homogeneous electro-Fenton by changing the composite mode of the materials. Three composites, NiFe layered double hydroxides (LDHs)/reduced graphene oxide (rGO), NiMn LDHs/rGO, and NiMnFe LDHs/rGO, were constructed by the electrostatic self-assembly of exfoliated LDHs with few-layer graphene. The LDHs/rGO was loaded on carbon mats to construct the electro-Fenton cathode materials, and the non-homogeneous electro-Fenton oxidative degradation of organic pollutants was realized by the in situ electrocatalytic reduction of O2 to ∙OH. Meanwhile, the effects of solution pH, applied voltage, and initial concentration on the performance of non-homogeneous electro-Fenton were investigated with ceftazidime as the target pollutant, which proved that the cathode materials have an excellent electro-Fenton degradation effect.

Layered rare-earth hydroxides as multi-modal medical imaging probes: particle size optimisation and compositional exploration

Recently, layered rare-earth hydroxides (LRHs) have received growing attention in the field of theranostics. We have previously reported the hydrothermal synthesis of layered terbium hydroxide (LTbH), which exhibited high biocompatibility, reversible uptake of a range of model drugs, and release-sensitive phosphorescence. Despite these favourable properties, LTbH particles produced by the reported method suffered from poor size-uniformity (670 ± 564 nm), and are thus not suitable for therapeutic applications. To ameliorate this issue, we first derive an optimised hydrothermal synthesis method to generate LTbH particles with a high degree of homogeneity and reproducibility, within a size range appropriate for in vivo applications (152 ± 59 nm, n = 6). Subsequently, we apply this optimised method to synthesise a selected range of LRH materials (R = Pr, Nd, Gd, Dy, Er, Yb), four of which produced particles with an average size under 200 nm (Pr, Nd, Gd, and Dy) without the need for further optimisation. Finally, we incorporate Gd and Tb into LRHs in varying molar ratios (1 : 3, 1 : 1, and 3 : 1) and assess the combined magnetic relaxivity and phosphorescence properties of the resultant LRH materials. The lead formulation, LGd1.41Tb0.59H, was demonstrated to significantly shorten the T2 relaxation time of water (r2 = 52.06 mM-1 s-1), in addition to exhibiting a strong phosphorescence signal (over twice that of the other LRH formulations, including previously reported LTbH), therefore holding great promise as a potential multi-modal medical imaging probe.

Toward Understanding the Formation Mechanism and OER Catalytic Mechanism of Hydroxides by In Situ and Operando Techniques

Developing efficient and affordable electrocatalysts for the sluggish oxygen evolution reaction (OER) remains a significant barrier that needs to be overcome for the practical applications of hydrogen production via water electrolysis, transforming CO2 to value-added chemicals, and metal-air batteries. Recently, hydroxides have shown promise as electrocatalysts for OER. In situ or operando techniques are particularly indispensable for monitoring the key intermediates together with understanding the reaction process, which is extremely important for revealing the formation/OER catalytic mechanism of hydroxides and preparing cost-effective electrocatalysts for OER. However, there is a lack of comprehensive discussion on the current status and challenges of studying these mechanisms using in situ or operando techniques, which hinders our ability to identify and address the obstacles present in this field. This review offers an overview of in situ or operando techniques, outlining their capabilities, advantages, and disadvantages. Recent findings related to the formation mechanism and OER catalytic mechanism of hydroxides revealed by in situ or operando techniques are also discussed in detail. Additionally, some current challenges in this field are concluded and appropriate solution strategies are provided.

Effects of Size and Shape on the Tolerances for Misalignment and Probabilities for Successful Oriented Attachment of Nanoparticles

Oriented attachment (OA) of nanoparticles is an important pathway of crystal growth, but there is a lack of tools to model OA. Here, we present several simple models that relate the probability of achieving OA to basic geometric parameters, such as particle size, shape, and lattice periodicity. A Moiré-domain model is applied to understand twist misorientations between parallel surfaces, and it predicts that the range of twist angles yielding perfect OA is inversely related to the width of the contact area. This idea is explored further through a surface functional model, which investigates how patterns of crystallographic registration can drive the emergence of complex orientational energy landscapes. The energy landscapes are predicted to possess multiple local minima that can trap particles in imperfect alignments, and these local minima become deeper and more numerous as the contact area increases, which makes OA more challenging for large particles. A second set of models is presented to understand the sequence of events by which two crystallographic faces become coplanar after the collision. We use a central force approximation to predict the odds that two particle faces will attain coalignment when the particles collide with random misalignments, and we show that in the absence of special biasing forces, the probability of attaining alignment on a given face is roughly proportional to its solid angle as viewed from the center of the particle. The model thus predicts that OA is most favorable between well-faceted particles and becomes exceedingly unlikely for large spherical particles that express many microfacets.

Regulation of Structure and Anion-Exchange Performance of Layered Double Hydroxide: Function of the Metal Cation Composition of a Brucite-like Layer

As anion-exchange materials, layered double hydroxides (LDHs) have attracted increasing attention in the fields of selective adsorption and separation, controlled drug release, and environmental remediation. The metal cation composition of the laminate is the essential factor that determines the anion-exchange performance of LDHs. Herein, we review the regulating effects of the metal cation composition on the anion-exchange properties and LDH structure. Specifically, the internal factors affecting the anion-exchange performance of LDHs were analyzed and summarized. These include the intercalation driving force, interlayer domain environment, and LDH morphology, which significantly affect the anion selectivity, anion-exchange capacity, and anion arrangement. By changing the species, valence state, size, and mole ratio of the metal cations, the structural characteristics, charge density, and interlayer spacing of LDHs can be adjusted, which affect the anion-exchange performance of LDHs. The present challenges and future prospects of LDHs are also discussed. To the best of our knowledge, this is the first review to summarize the essential relationship between the metal ion composition and anion-exchange performance of laminates, providing important insights for regulating the anion-exchange performance of LDHs.

Layered double hydroxide-based nanomaterials for biomedical applications

Against the backdrop of increased public health awareness, inorganic nanomaterials have been widely explored as promising nanoagents for various kinds of biomedical applications. Layered double hydroxides (LDHs), with versatile physicochemical advantages including excellent biocompatibility, pH-sensitive biodegradability, highly tunable chemical composition and structure, and ease of composite formation with other materials, have shown great promise in biomedical applications. In this review, we comprehensively summarize the recent advances in LDH-based nanomaterials for biomedical applications. Firstly, the material categories and advantages of LDH-based nanomaterials are discussed. The preparation and surface modification of LDH-based nanomaterials, including pristine LDHs, LDH-based nanocomposites and LDH-derived nanomaterials, are then described. Thereafter, we systematically describe the great potential of LDHs in biomedical applications including drug/gene delivery, bioimaging diagnosis, cancer therapy, biosensing, tissue engineering, and anti-bacteria. Finally, on the basis of the current state of the art, we conclude with insights on the remaining challenges and future prospects in this rapidly emerging field.

Nanoscale Faceting and Ligand Shell Structure Dominate the Self-Assembly of Nonpolar Nanoparticles into Superlattices

Self-assembly of nanoscale structures at liquid-solid interfaces occurs in a broad range of industrial processes and is found in various phenomena in nature. Conventional theory assumes spherical particles and homogeneous surfaces, but that model is oversimplified, and nanoscale in situ observations are needed for a more complete understanding. Liquid-phase scanning transmission electron microscopy (LP-STEM) is used to examine the interactions that direct the self-assembly of superlattices formed by gold nanoparticles (AuNPs) in nonpolar liquids. Varying the molecular coating of the substrate modulates short-range attraction and leads to switching between a range of different geometric structures, including hexagonal close-packed (hcp), simple hexagonal (sh), dodecahedral quasi-crystal (dqc), and body-centered cubic (bcc) lattices, as well as random distributions. Langevin dynamics simulations explain the experimental results in terms of the interplay between nanoparticle faceting, ligand shell structure, and substrate-NP interactions.

Synthesis of calcium-aluminum-layered double hydroxide and a polypyrrole decorated product for efficient removal of high concentrations of aqueous hexavalent chromium

To efficiently remove high concentrations of hexavalent chromium (Cr(VI)), calcium-aluminum-layered double hydroxide (CaAl-LDH, denoted as CAL), and polypyrrole-modified CAL (CAL-PPy) were prepared by hydrothermal and in situ polymerization methods, respectively. The chemical structure, morphology, and elemental results indicated that the chain-like polypyrrole was decorated with hexagonal CAL. The specific surface area of CAL-PPy increased from 8.746 m²/g to 24.24 m²/g. The adsorption performances of CAL and CAL-PPy for aqueous Cr(VI) were investigated using batch equilibrium experiments. The decontamination process of aqueous Cr(VI) (100 mg/L) reached the equilibrium state within 50 min, and the kinetic data met the pseudo-second-order kinetic equation. The Langmuir model described the isothermal data properly, and the obtained theoretical adsorption capacity of CAL for Cr(VI) at 318 K was 34.06 mg/g, while that of CAL-PPy was 66.14 mg/g. The removal mechanisms involved electrostatic attraction, surface complexation, anion exchange, and reduction to low-toxicity Cr(III). Therefore, CAL and CAL-PPy have underlying applications in treating real wastewater containing Cr(VI).

Rational design of the inlet configuration of flow systems for enhanced mixing

High mass transfer rate is a key advantage of microreactors however, under their characteristic laminar flow, it is dominated by slow diffusion rather than fast convection. In this paper, we demonstrate how the configuration of the inlet, i.e. mixers, can promote different flow patterns to greatly enhance mixing efficiency downstream. A systematic evaluation and comparison of different widely adopted mixers as well as advanced designs is presented using a combination of computational fluid dynamics (CFD) and backward particle tracking to accurately calculate diffusion, in the absence of numerical diffusion (false diffusion). In the method, the convection contributed concentration profile is obtained by tracking sampling points from a cross-sectional plane to the inlet point, and diffusion is estimated subsequently. In conventional T- and Y-mixers, the shape of channel, circular or square, is key with only the latter promoting engulfment flow. In cyclone mixers, the resulting average inlet velocity, independent of Reynolds number or geometry, is the dominating design parameter to predict mixing efficiency. This work will serve as a guideline for the design of efficient flow systems with predicted mixing as a way of maximising selectivity and product quality.

Magnetic-field-assisted deposition of self-assembling crystallite layers of Co2+-containing layered double hydroxides

Precipitation of nanocrystallites of cobalt-aluminium layered double hydroxides in a magnetic field has been studied. In a magnetic field perpendicular to the substrate, dense and homogeneous films have been obtained. Magnetic anisotropy of the crystallites is explained by deviation from the statistical cation distribution in favour of honeycomb-like coordination of cobalt.

A Hierarchical-Structured Impeller with Engineered Pd Nanoparticles Catalyzing Suzuki Coupling Reactions for High-Purity Biphenyl

Suzuki cross-coupling reactions catalyzed by palladium are authoritative protocols in fine-chemical synthesis. Mass transfer and catalyst activity are both significant factors affecting the reaction efficiency in heterogeneous reactions. Although the holistic catalysts hold great promise in heterogeneous reactions due to the enhanced mass transport and convenient recycling, the unsatisfied catalytic activity has impeded further large-scale applications. In addition, another pronounced barrier is the product separation in the intricate system. Here, the catalytic production and separation of biphenyl (purity of 99.7%) were achieved by integrating the Suzuki cross-coupling reactions and the crystallization separation for the first time. A hierarchical-structured impeller with Pd nanoparticles (NPs) loaded on the Ni(OH)₂ nanosheets was prepared to catalyze the Suzuki reactions for bromobenzene, which exhibits a high turnover frequency (TOF) value of 25,976 h^-1 and a yield of 99.5%. The X-ray absorption fine structure (XAFS) analysis has unveiled that the electron transfer between the Pd NPs and Ni(OH)₂ accounts for the greatly enhanced catalytic activity. The findings inspire new insights toward rational engineering of highly efficient holistic catalysts for Suzuki reaction, and the innovative integrated technology offers an avenue for the separation and collection of products.

Layered double hydroxides are still out in the bloom: Syntheses, applications and advantages of three-dimensional flower-like structures

Layered double hydroxides (LDHs) have received great attention for years in numerous fields. Controlled and flexible layer composition, as well as the vast assortment of possible anionic guests, and easy adaptability for multipurpose applications, have been some of the many reasons behind their extraordinary success. However, versatility does not only involve the composition or the dimensions of the crystals but also their morphology. Aside from conventional hexagonal, flat structures, three-dimensional assemblies have been reported with architectures closely resembling those of flowers. The possibility of interconnecting the LDH nanosheets in rosette-like geometries has arisen the interest in finding new ways to control, modulate, and guide the particle growth obtaining hierarchical structures to be adapted to specific targets. This review is focused on describing the different strategies implemented to build flower-like assemblies, and on investigating their applications, looking for specific advantages of the use of a three-dimensional architecture over a bi-dimensional one.

Layered Double Hydroxides in Bioinspired Nanotechnology

Layered Double Hydroxides (LDHs) are a relevant class of inorganic lamellar nanomaterials that have attracted significant interest in life science-related applications, due to their highly controllable synthesis and high biocompatibility. Under a general point of view, this class of materials might have played an important role for the origin of life on planet Earth, given their ability to adsorb and concentrate life-relevant molecules in sea environments. It has been speculated that the organic–mineral interactions could have permitted to organize the adsorbed molecules, leading to an increase in their local concentration and finally to the emergence of life. Inspired by nature, material scientists, engineers and chemists have started to leverage the ability of LDHs to absorb and concentrate molecules and biomolecules within life-like compartments, allowing to realize highly-efficient bioinspired platforms, usable for bioanalysis, therapeutics, sensors and bioremediation. This review aims at summarizing the latest evolution of LDHs in this research field under an unprecedented perspective, finally providing possible challenges and directions for future research.

Microfluidic-Architected Nanoarrays/Porous Core-Shell Fibers toward Robust Micro-Energy-Storage

Methods enabling the controllable fabrication of orderly structural and active nanomaterials, along with high-speed ionic pathways for charge migration and storage are highly fundamental in fiber-shaped micro-supercapacitors (MSCs). However, due to fiber-electrodes with compact internal microstructure and less porosity, MSCs usually display a low energy density. Here, an innovative microfluidic strategy is proposed to design ordered porous and anisotropic core-shell fibers based on nickel oxide arrays/graphene nanomaterials. Owing to the homogeneous microchannels reaction, the graphene core maintains a uniformly anisotropic porous structure, and the nickel oxide shell keeps steadily vertically aligned nanosheets. The MSC presents an ultrahigh energy density (120.3 µWh cm-2) and large specific capacitance (605.9 mF cm-2). This higher performance originates from the microfluidic-architected core-shell fiber with abundant ionic channels (plentiful micro-/mesopores), large specific-surface-area (425.6 m2 g-1), higher electrical conductivity (176.6 S cm-1), and sufficient redox activity, facilitating ions with quicker diffusion and greater accumulation. Considering those outstanding properties, a wearable self-powered system, converting and storing solar energy into electric energy, is designed to light up displays. This microfluidic strategy offers an effective way to design new structural materials, which will advance the development of next-generation wearable/smart industries.

Layered Double Hydroxide-Based Nanomaterials-From Fundamentals to Applications

Layered double hydroxides (LDHs) and their composites with various substances represent an important class of materials suitable for several existing and future applications in biological, chemical, and environmental processes [...].