A highly active Ni(II)-triadamantylphosphine catalyst for ultrahigh-molecular-weight polyethylene synthesis

Nickel-catalyzed in situ synthesis of UHMWPE/TiO2 composites with enhanced mechanical properties and adjustable photocatalytic degradabilities

Expanding the application field of polyolefin materials through functionalization has been a research hotspot in the past three decades. Here, a TiO2-supported anilinenaphthoquinone nickel catalyst was assembled and applied for in situ ethylene polymerization with high activity (>2000 kg mol-1h-1) to produce ultra-high molecular weight polyethylene (UHMWPE)/TiO2 composites with unique physicochemical performance. The UHMWPE/TiO2 composite films and fibers prepared by in-situ ethylene polymerization are superior to the samples from the blend system in issues such as TiO2 dispersibility, mechanical property, and photocatalytic degradability. The mechanical properties (strength up to 26.8 cN/dtex, modulus up to 1248.8 cN/dtex) of the obtained UHMWPE/TiO2 composite fibers are significantly improved with a very low dosage of TiO2 (as low as 1.4 wt‰). Moreover, UHMWPE/TiO2 composites obtained by coating Al2O3 and SiO2 on the surface of TiO2 not only retain the strong absorption of ultraviolet rays, but also effectively weaken the photocatalytic degradation effect.

Recent Advancements in the Synthesis of Ultra-High Molecular Weight Polyethylene via Late Transition Metal Catalysts

Ultra-high molecular weight polyethylenes (UHMWPEs) are significant engineering plastics for their unique properties, such as high impact resistance, abrasion resistance, weatherability, lubricity, and chemical resistance. Consequently, developing a suitable catalyst is vital in facilitating the preparation of UHMWPE. The late transition metal catalysts have emerged as effective catalysts in producing UHMWPE due to their availability, enhanced tolerance to heteroatom groups, active polymerization characteristics, and good copolymerization ability with polar monomers. In this review, we mainly focus on the late transition metal catalysts, summarizing advancements in their application over the past decade. Four key metals (Ni, Pd, Fe, Co) for generating linear or branched UHMWPE will be primarily explored in this manuscript.

Visible light-induced palladium-carbon bond weakening in catalytically relevant T-shaped complexes

Triggering one-electron redox processes during palladium catalysis holds the potential to unlock new reaction mechanisms and synthetic methods not previously accessible in the typical two-electron reaction manifolds that dominate palladium catalysis. We report that T-shaped organopalladium(ii) complexes coordinated by a bulky monophosphine, a class of organometallic intermediate featured in a range of contemporary catalytic reactions, undergo blue light-promoted bond weakening leading to mild and efficient homolytic cleavage of strong Pd(ii)-C(sp3) bonds under ambient conditions. The origin of light-triggered radical formation in these systems, which lack an obvious ligand-based chromophore (i.e., π-systems), was investigated using a combination of DFT calculations, photoactinometry, and transient absorption spectroscopy. The available data suggest T-shaped organopalladium(ii) complexes manifest unusual blue light-accessible Pd-to-C(sp3) transition. The quantum efficiency and excited state lifetime of this process were unexpectedly superior compared to a prototypical (α-diimine)Pd(ii) complex featuring a low-lying, ligand-centered LUMO (π*). These results suggest coordinatively-unsaturated organopalladium(ii) compounds, catalysts in myriad catalytic processes, have untapped potential for one-electron reactivity under visible light excitation.

Ethylene Polymerization through Neutral Nickel Complexes Bearing Cyclic Imides

The catalyst synthesis of salicylaldimine Ni(II) complexes with bulky imide moieties, ethylene polymerization, and characterization of synthesized polyethylenes are described in this paper. These Ni(II) complexes are designed to bear 2-aminobiphenyl and 4-tritylaniline. Results confirmed relatively high activity (up to $4\times {10}^4$  g PE mol Ni-1 h-1) of these catalysts in ethylene polymerization. Moreover, Ni(II) complexes demonstrated enhanced thermal stability, maintaining activity level up to 80°C. The generated polyethylenes possess moderate branching density and high melting temperatures. Less bulky 2-aminobiphenyl group resulted in higher branch content, while in Ni(II) complexes bearing 4-tritylaniline, more linear structure was observed. These semicrystalline polyethylenes showed mechanical properties similar to thermoplastics.

Recent Advances in the Copolymerization of Ethylene with Polar Comonomers by Nickel Catalysts

The less-expensive and earth-abundant nickel catalyst is highly promising in the copolymerization of ethylene with polar monomers and has thus attracted increasing attention in both industry and academia. Herein, we have summarized the recent advancements made in the state-of-the-art nickel catalysts with different types of ligands for ethylene copolymerization and how these modifications influence the catalyst performance, as well as new polymerization modulation strategies. With regard to α-diimine, salicylaldimine/ketoiminato, phosphino-phenolate, phosphine-sulfonate, bisphospnine monoxide, N-heterocyclic carbene and other unclassified chelates, the properties of each catalyst and fine modulation of key copolymerization parameters (activity, molecular weight, comonomer incorporation rate, etc.) are revealed in detail. Despite significant achievements, many opportunities and possibilities are yet to be fully addressed, and a brief outlook on the future development and long-standing challenges is provided.

Customizing Polymers by Controlling Cation Switching Dynamics in Non-Living Polymerization

Controlling the chain growth process in non-living polymerization reactions is difficult because chain termination typically occurs faster than the time it takes to apply an external trigger. To overcome this limitation, we have developed a strategy to regulate non-living polymerizations by exploiting the chemical equilibria between a metal catalyst and secondary metal cations. We have prepared two nickel phenoxyphosphine-polyethylene glycol variants, one with 2-methoxyphenyl (Ni1) and another with 2,6-dimethoxyphenyl (Ni2) phosphine substituents. Ethylene polymerization studies using these complexes in the presence of alkali salts revealed that chain growth is strongly dependent on electronic effects, whereas chain termination is dependent on both steric and electronic effects. By adjusting the solvent polarity, we can favor polymerizations via non-switching or dynamic switching modes. For example, in a 100:0.2 mixture of toluene/diethyl ether, reactions of Ni1 and both Li⁺ and Na⁺ cations in the presence of ethylene yielded bimodal polymers with different relative fractions depending on the Li⁺/Na⁺ ratio used. In a 98:2 mixture of toluene/diethyl ether, reactions of Ni2 and Cs⁺ in the presence of ethylene generated monomodal polyethylene with dispersity <2.0 and increasing molecular weight as the amount of Cs⁺ added increased. Solution studies by NMR spectroscopy showed that cation exchange between the nickel complexes and alkali cations in 98:2 toluene/diethyl ether is fast on the NMR time scale, which supports our proposed dynamic switching mechanism.

Direct copolymerization of ethylene with protic comonomers enabled by multinuclear Ni catalysts

Ethylene/polar monomer coordination copolymerization offers an attractive way of making functionalized polyolefins. However, ethylene copolymerization with industrially relevant short chain length alkenoic acid remain a big challenge. Here we report the efficient direct copolymerization of ethylene with vinyl acetic acid by tetranuclear nickel complexes. The protic monomer can be extended to acrylic acid, allylacetic acid, ω-alkenoic acid, allyl alcohol, and homoallyl alcohol. Based on X-ray analysis of precatalysts, control experiments, solvent-assisted electrospray ionization-mass spectrometry detection of key catalytic intermediates, and density functional theory studies, we propose a possible mechanistic scenario that involves a distinctive vinyl acetic acid enchainment enabled by Ni···Ni synergistic effects. Inspired by the mechanistic insights, binuclear nickel catalysts are designed and proved much more efficient for the copolymerization of ethylene with vinyl acetic acid or acrylic acid, achieving the highest turnover frequencies so far for both ethylene and polar monomers simultaneously.

Fluorinated α-Diimine Nickel Mediated Ethylene (Co)Polymerization

Fluorine substituents in transition metal catalysts are of great importance in olefin polymerization catalysis; however, the comprehensive effect of fluorine substituents is elusive in seminal late transition metal α-diimine catalytic system. In this contribution, fluorine substituents at various positions (ortho-, meta-, and para-F) and with different numbers (F_n ; n=0, 1, 2, 3, 5) were installed into the well-defined N-terphenyl amine and thus were studied for the first time in the nickel α-diimine promoted ethylene polymerization and copolymerization with polar monomers. The position of the fluorine substituent was particularly crucial in these polymerization reactions in terms of catalytic activity, polymer molecular weight, branching density, and incorporation of polar monomer, and thus a picture on the fluorine effect was given. As a notable result, the ortho-F substituted α-diimine nickel catalyst produced highly linear polyethylenes with an extremely high molecular weight (M_w =8703 kDa) and a significantly low degree of branching of 1.4/1000 C; however, the meta-F and/or para-F substituted α-diimine nickel catalysts generated highly branched (up to 80.2/1000 C) polyethylenes with significantly low molecular weights (M_w =20-50 kDa).

Hydrogen-Bonding-Induced Heterogenization of Nickel and Palladium Catalysts for Copolymerization of Ethylene with Polar Monomers

The practical synthesis of polar-functionalized polyolefins using transition-metal-catalyzed copolymerization of olefins with polar monomers is a challenge; the use of heterogeneous catalysts is little explored. Herein, we report the synthesis of heterogeneous naphthoquinone-based nickel (Ni/SiO₂ ) and palladium (Pd/SiO₂ ) catalysts through hydrogen bonding interactions of the ligands with the silica surface. Ni/SiO₂ exhibits high activities (up to 2.65×10⁶  g mol^-1  h^-1 ) during the copolymerization of ethylene with 5-hexene-1-yl-acetate, affording high-molecular-weight (M_n up to 630 000) polar-functionalized semicrystalline polyethylene (comonomer incorporation up to 2.8 mol %), along with great morphology control. The resulting copolymers possess improved surface properties and great mechanical properties. Pd/SiO₂ can mediate ethylene copolymerization with polar monomers with moderate activity to produce high-molecular-weight copolymers with tunable comonomer incorporation.

Efficient Suppression of Chain Transfer and Branching via Cs -Type Shielding in a Neutral Nickel(II) Catalyst

An effective shielding of both apical positions of a neutral NiII active site is achieved by dibenzosuberyl groups, both attached via the same donors' N-aryl group in a Cs -type arrangement. The key aniline building block is accessible in a single step from commercially available dibenzosuberol. This shielding approach suppresses chain transfer and branch formation to such an extent that ultrahigh molecular weight polyethylenes (5×106  g mol-1 ) are accessible, with a strictly linear microstructure (<0.1 branches/1000C). Key features of this highly active (4.3×105  turnovers h-1 ) catalyst are an exceptionally facile preparation, thermal robustness (up to 90 °C polymerization temperature), ability for living polymerization and compatibility with THF as a polar reaction medium.

Boosting the Thermal Stability of α-Diimine Palladium Complexes in Norbornene Polymerization from Construction of Intraligand Hydrogen Bonding and Simultaneous Increasing Axial/Equatorial Bulkiness

Increasing the thermostability of α-diimine late-transition-metal complexes and therefore rendering them more active at higher temperatures is of great importance, yet challenging for the olefin polymerization field. In the present research, a new family of α-diimine palladium complexes that can promote norbornene polymerization at high temperatures (up to 140 °C) is disclosed. Because of the conformational restriction caused by increasing the axial and equatorial bulkiness as well as the presence of intraligand H···F hydrogen bonds, N-aryl rotations can be efficiently restricted, therefore circumventing the deactivation of the active species at high temperatures. At 80-140 °C, these complexes can efficiently catalyze norbornene homopolymerizations, giving high catalytic activities up to 5.65 × 10⁷ g of PNB per mole Ni per hour and polymers with high molecular weights up to 37.2 × 10⁴ g/mol, which are highly superior to catalytic systems mediated by CF₃-free complexes. Moreover, these complexes could also afford medium catalytic activities in the presence of polar 5-norbornene-2-carboxylic acid methyl ester (NB-COOCH₃).

Custom-made polar monomers utilized in nickel and palladium promoted olefin copolymerization

In this review, the functions of custom-made polar monomers are insightfully emphasized in the preparation of functional polyolefins.

Effects of ligands on the migratory insertion of alkenes into rhodium-oxygen bonds

Migratory insertions of olefins into metal-oxygen bonds are elementary steps of important catalytic processes, but well characterised complexes that undergo this reaction are rare, and little information on the effects of ancillary ligands on such reactions has been gained. We report a series of alkoxo alkene complexes of rhodium(i) that contain a range of bidentate ligands and that undergo insertion of the alkene. Our results show that complexes containing less electron-donating ancillary ligands react faster than their counterparts containing more electron-donating ancillary ligands, and that complexes possessing ligands with larger bite angles react faster than those with smaller bite angles. External added ligands had several effects on the reactions, including an inhibition of olefin isomerisation in the product and acceleration of the displacement of the product from complexes of ancillary ligands with small bite angles. Complementary computational studies help elucidate the details of these insertion processes.

Living Chain-Walking (Co)Polymerization of Propylene and 1-Decene by Nickel α-Diimine Catalysts

Homo- and copolymers of propylene and 1-decene were synthesized by controlled chain-walking (co)polymerization using phenyl substituted α-diimine nickel complexes activated with modified methylaluminoxane (MMAO). This catalytic system was found to polymerize propylene in a living fashion to furnish high molecular weight ethylene-propylene (EP) copolymers. The copolymerizations proceeded to give high molecular weight P/1-decene copolymers with narrow molecular weight distribution (Mw/Mn ≈ 1.2), which indicated a living nature of copolymerization at room temperature. The random copolymerization results indicated the possibility of precise branched structure control, depending on the polymerization temperature and time.

Ultrahigh Branching of Main-Chain-Functionalized Polyethylenes by Inverted Insertion Selectivity

Branched polyolefin microstructures resulting from so-called "chain walking" are a fascinating feature of late transition metal catalysts; however, to date it has not been demonstrated how desirable branched polyolefin microstructures can be generated thereby. We demonstrate how highly branched polyethylenes with methyl branches (220 Me/1000 C) exclusively and very high molecular weights (ca. 106  g mol-1 ), reaching the branch density and microstructure of commercial ethylene-propylene elastomers, can be generated from ethylene alone. At the same time, polar groups on the main chain can be generated by in-chain incorporation of methyl acrylate. Key to this strategy is a novel rigid environment in an α-diimine PdII catalyst with a steric constraint that allows for excessive chain walking and branching, but restricts branch formation to methyl branches, hinders chain transfer to afford a living polymerization, and inverts the regioselectivity of acrylate insertion to a 1,2-mode.

A simple and versatile nickel platform for the generation of branched high molecular weight polyolefins

The development of high-performance transition metal catalysts has long been a major driving force in academic and industrial polyolefin research. Late transition metal-based olefin polymerization catalysts possess many unique properties, such as the ability to generate variously branched polyolefins using only ethylene as the feedstock and the capability of incorporating polar functionalized comonomers without protecting agents. Here we report the synthesis and (co)polymerization studies of a simple but extremely versatile α-imino-ketone nickel system. This type of catalyst is easy to synthesize and modify, and it is thermally stable and highly active during ethylene polymerization without the addition of any cocatalysts. Despite the sterically open nature, these catalysts can generate branched Ultra-High-Molecular-Weight polyethylene and copolymerize ethylene with a series of polar comonomers. The versatility of this platform has been further demonstrated through the synthesis of a dinuclear nickel catalyst and the installation of an anchor for catalyst heterogenization.

Catalytic systems based on nickel(ii) complexes with bis(3,5-dimethylpyrazol-1-yl)methane – impact of PPh3 on the formation of precatalysts and selective dimerization of ethylene

Triphenylphosphine facilities ionization of Ni(ii) complexes with bis(3,5-dimethylpyrazol-1-yl)metane, which results in highly active catalytic systems for ethylene dimerization.

Synthesis, reactivity and catalytic activity of Au-PAd3 complexes

Novel Au-PAd₃ complexes have been synthesized from the known [Au(PAd₃)Cl]. A number of derivatives were deployed as catalysts and compared with NHC and tertiary phosphine congeners.