Crystal-confined freestanding ionic liquids for reconfigurable and repairable electronics

Flexible iontronic sensing

The emerging flexible iontronic sensing (FITS) technology has introduced a novel modality for tactile perception, mimicking the topological structure of human skin while providing a viable strategy for seamless integration with biological systems. With research progress, FITS has evolved from focusing on performance optimization and structural enhancement to a new phase of integration and intelligence, positioning it as a promising candidate for next-generation wearable devices. Therefore, a review from the perspective of technological development trends is essential to fully understand the current state and future potential of FITS devices. In this review, we examine the latest advancements in FITS. We begin by examining the sensing mechanisms of FITS, summarizing research progress in material selection, structural design, and the fabrication of active and electrode layers, while also analysing the challenges and bottlenecks faced by different segments in this field. Next, integrated systems based on FITS devices are reviewed, highlighting their applications in human-machine interaction, healthcare, and environmental monitoring. Additionally, the integration of artificial intelligence into FITS is explored, focusing on optimizing front-end device design and improving the processing and utilization of back-end data. Finally, building on existing research, future challenges for FITS devices are identified and potential solutions are proposed.

Polymerization-Induced Self-Assembly Providing PEG-Gels with Dynamic Micelle-Crosslinked Hierarchical Structures and Overall Improvement of Their Comprehensive Performances

Polymer gels are fascinating soft materials and have become excellent candidates for wearable electronics, biomedicine, sensors, etc. Synthetic gels usually suffer from poor mechanical properties, and integrating good mechanical properties, adhesiveness, stability, and self-healing performances in one gel is more difficult. Herein, polymerization-induced self-assembly (PISA) providing PEG-gels with an overall improvement in their comprehensive performances is reported. PISA synthesis is carried out in PEG (solvent) to efficiently produce various nanoparticles, which are used as the nanofillers in the subsequent synthesis of PEG-gels with dynamic micelle-crosslinked hierarchical structures. Compared to hydrogels, PEG-gels show excellent long-term stability due to the nonvolatile feature of PEG solvent. The hierarchical PEG-gels (with nanofillers) exhibit better mechanical and adhesive properties than the homogeneous-gels (without nanofillers). The energy dissipation mechanism of the PEG-gels is analyzed via stress relaxation and cyclic mechanical tests. High-density hydrogen bonds between the micelles and PAA matrix can be broken and reformed, endowing better self-healing properties of the dynamic micelle-crosslinked PEG gels. This work provides a simple strategy for producing hierarchical structural gels with enhanced properties, which offers fundamentals and inspirations for the designing of various advanced functional materials.

Energy Efficient Memristor Based on Green-Synthesized 2D Carbonyl-Decorated Organic Polymer and Application in Image Denoising and Edge Detection: Toward Sustainable AI

According to the United Nations, around 53 million metric tons of electronic waste is produced every year, worldwide, the big majority of which goes unprocessed. With the rapid advances in AI technologies and adoption of smart gadgets, the demand for powerful logic and memory chips is expected to boom. Therefore, the development of green electronics is crucial to minimizing the impact of the alarmingly increasing e-waste. Here, it is shown the application of a green synthesized, chemically stable, carbonyl-decorated 2D organic, and biocompatible polymer as an active layer in a memristor device, sandwiched between potentially fully recyclable electrodes. The 2D polymer's ultramicro channels, decorated with C═O and O─H groups, efficiently promote the formation of copper nanofilaments. As a result, the device shows excellent bipolar resistive switching behavior with the potential to mimic synaptic plasticity. A large resistive switching window (103), low SET/RESET voltage of ≈0.5/-1.5 V), excellent device-to-device stability and synaptic features are demonstrated. Leveraging the device's synaptic characteristics, its applications in image denoising and edge detection is examined. The results show a reduction in power consumption by a factor of 103 compared to a traditional Tesla P40 graphics processing unit, indicating great promise for future sustainable AI-based applications.

Ionic Liquid Crystals as Chromogenic Materials

Ionic liquid crystals (ILCs), a class of soft matter materials whose properties can be tuned by the wise pairing of the cation and anion, have recently emerged as promising candidates for different applications, combining the characteristics of ionic liquids and liquid crystals. Among those potential uses, this review aims to cover chromogenic ILCs. In this context, examples of photo-, electro- and thermochromism based on ILCs are provided. Furthermore, thermotropic and lyotropic ionic liquid crystals are also summarised, including the most common chemical and phase structures, as well as the advantages of confining these materials. This manuscript also comprises the following main experimental techniques used to characterise ILCs: Differential Scanning Calorimetry (DSC), Polarised Optical Microscopy (POM) and X-Ray Powder Diffraction (XRD). Chromogenic ILCs can be interesting smart materials for energy and health purposes.

Diurnal humidity cycle driven selective ion transport across clustered polycation membrane

The ability to manipulate the flux of ions across membranes is a key aspect of diverse sectors including water desalination, blood ion monitoring, purification, electrochemical energy conversion and storage. Here we illustrate the potential of using daily changes in environmental humidity as a continuous driving force for generating selective ion flux. Specifically, self-assembled membranes featuring channels composed of polycation clusters are sandwiched between two layers of ionic liquids. One ionic liquid layer is kept isolated from the ambient air, whereas the other is exposed directly to the environment. When in contact with ambient air, the device showcases its capacity to spontaneously produce ion current, with promising power density. This result stems from the moisture content difference of ionic liquid layers across the membrane caused by the ongoing process of moisture absorption/desorption, which instigates selective transmembrane ion flux. Cation flux across the polycation clusters is greatly inhibited because of intensified charge repulsion. However, anions transport across polycation clusters is amplified. Our research underscores the potential of daily cycling humidity as a reliable energy source to trigger ion current and convert it into electrical current.

Exploring Mixed Ionic-Electronic-Conducting PVA/PEDOT:PSS Hydrogels as Channel Materials for Organic Electrochemical Transistors

Here, we report the preparation and evaluation of PVA/PEDOT:PSS-conducting hydrogels working as channel materials for OECT applications, focusing on the understanding of their charge transport and transfer properties. Our conducting hydrogels are based on crosslinked PVA with PEDOT:PSS interacting via hydrogen bonding and exhibit an excellent swelling ratio of ~180-200% w/w. Our electrochemical impedance studies indicate that the charge transport and transfer processes at the channel material based on conducting hydrogels are not trivial compared to conducting polymeric films. The most relevant feature is that the ionic transport through the swollen hydrogel is clearly different from the transport through the solution, and the charge transfer and diffusion processes govern the low-frequency regime. In addition, we have performed in operando Raman spectroscopy analyses in the OECT devices supported by first-principle computational simulations corroborating the doping/de-doping processes under different applied gate voltages. The maximum transconductance (gm~1.05 μS) and maximum volumetric capacitance (C*~2.3 F.cm-3) values indicate that these conducting hydrogels can be promising candidates as channel materials for OECT devices.

Biomimetic Ion Channel Regulation for Temperature-Pressure Decoupled Tactile Perception

The perception of temperature and pressure of skin plays a vital role in joint movement, hand grasp, emotional expression, and self-protection of human. Among many biomimetic materials, ionic gels are uniquely suited to simulate the function of skin due to its ionic transport mechanism. However, both the temperature and pressure sensing are heavily dependent on the changes in ionic conductivity, making it impossible to decouple the temperature and pressure signals. Here, a pressure-insensitive and temperature-modulated ion channel is designed by synergistic strategies for gel skeleton's compact packing and ultra-thin structure, mimicking the function of the temperature ion channel in human skin. This ion-confined gel can completely suppress the pressure response of the temperature sensing layer. Furthermore, a temperature-pressure decoupled ionic sensor is fabricated and it is demonstrated that the ionic sensor can sense complex signals of temperature and pressure. This novel and effective approach has great potential to overcome one of the current barriers in developing ionic skin and extending its applications.

Healable Ionic Conductors with Extremely Low-Hysteresis and High Mechanical Strength Enabled by Hydrophobic Domain-Locked Reversible Interactions

Extremely low hysteresis, high mechanical strength, superior toughness, and excellent healability are essential for stretchable ionic conductors to enhance their reliability and meet for cutting-edge applications. However, the fabrication of stretchable ionic conductors with such mutually exclusive properties remains challenging. Herein, extremely low-hysteresis and healable ionic conductors with a tensile strength of ≈8.9 MPa and toughness of ≈23.2 MJ m-3 are fabricated through the complexation of 4-carboxybenzaldehyde (CBA) grafted poly(vinyl alcohol) (PVA) (denoted as PVA-CBA) and poly (allylamine hydrochloride) (PAH) followed by acidification and ion-loading steps. The acidification step generates the PVA-CBA/PAH ionic conductors with in situ formed dynamic hydrophobic domains that lock and stabilize noncovalent interactions. This significantly minimizes the energy dissipation of the ionic conductors during cyclic mechanical loading (≤200% strain), resulting in ionic conductors with extremely low hysteresis (≈5%). The fractured ionic conductors can be healed at 60 °C to restore their original properties. Because of the extremely low hysteresis, the PVA-CBA/PAH ionic conductors show a highly stable and reproducible electrical response over 5000 uninterrupted loading-unloading cycles at a strain of 200%. The ionic conductor based sensors exhibit a high sensitivity to a wide range of strains (1-500%).

Ionic liquids with reversible photo-induced conductivity regulation in aqueous solution

Stimulus-responsive ionic liquids have gained significant attention for their applications in various areas. Herein, three kinds of azobenzimidazole ionic liquids with reversible photo-induced conductivity regulation were designed and synthesized. The change of electrical conductivity under UV/visible light irradiation in aqueous solution was studied, and the effect of chemical structure and concentration of ionic liquids containing azobenzene to the regulation of photoresponse conductivity were discussed. The results showed that exposing the ionic liquid aqueous solution to ultraviolet light significantly increased its conductivity. Ionic liquids with longer alkyl chains exhibited an even greater increase in conductivity, up to 75.5%. Then under the irradiation of visible light, the electrical conductivity of the solution returned to its initial value. Further exploration of the mechanism of the reversible photo-induced conductivity regulation of azobenzene ionic liquids aqueous solution indicated that this may attributed to the formation/dissociation of ionic liquids aggregates in aqueous solution induced by the isomerization of azobenzene under UV/visible light irradiation and resulted the reversible conductivity regulation. This work provides a way for the molecular designing and performance regulation of photo-responsive ionic liquid and were expected to be applied in devices with photoconductive switching and micro photocontrol properties.

Stabilizing Liquid in Precise Nonequilibrium Shapes via Fast Interfacial Polymerization

Due to the minimization of interface area caused by surface tension, the stabilization of liquid in complex and precise nonequilibrium shapes is challenging. In this work, a simple, surfactant-free, and covalent strategy to stabilize liquid in precise nonequilibrium shapes via fast interfacial polymerization (FIP) of highly reactive n-butyl cyanoacrylate (BCA) monomer triggered by water-soluble nucleophiles is described. Full interfacial coverage can be achieved instantly, and the resultant polyBCA film anchored at the interface can support the unequal interface stress, which allows the production of non-spherical droplets with complex shapes. Notably, the formulation of internal aqueous phase is nearly unaffected since no specific additive is required. Moreover, considering the excellent biocompatibility of BCA and polyBCA, the produced droplets can be used as micro-bioreactor for enzyme catalysis and even bacterial culture, which well mimic the morphology of cells and bacteria to achieve the biochemical reaction in non-spherical droplets. The present work not only opens a new sight for the stabilization of liquid in nonequilibrium shapes, but may also promote the development of synthetic biology based on non-spherical droplets, and tremendous potential applications are anticipated.

Recent Advances in Confining Polyoxometalates and the Applications

Polyoxometalates (POMs) are widely used in catalysis, energy storage, biomedicine, and other research fields due to their unique acidity, photothermal, and redox features. However, the leaching and agglomeration problems of POMs greatly limit their practical applications. Confining POMs in a host material is an efficient tool to address the above-mentioned issues. POM@host materials have received extensive attention in recent years. They not only inherent characteristics of POMs and host, but also play a significant synergistic effect from each component. This review focuses on the recent advances in the development and applications of POM@host materials. Different types of host materials are elaborated in detail, including tubular, layered, and porous materials. Variations in the structures and properties of POMs and hosts before and after confinement are highlighted as well. In addition, an overview of applications for the representative POM@host materials in electrochemical, catalytic, and biological fields is provided. Finally, the challenges and future perspectives of POM@host composites are discussed.

Engineering PEDOT:PSS/PEG Fibers with a Textured Surface toward Comprehensive Personal Thermal Management

The wild environment is unpredictable where soaring or plummeting temperatures in extreme weather events can pose serious threats to human lives. Incorporating passive evaporative cooling and controllable electric heating into clothing could effectively protect human beings from such harsh environments. In this work, poly(3,4-ethylene dioxy thiophene):poly(styrene sulfonate)/poly(ethylene glycol) (PPP) fibers with the core-shell structure and attractively textured surface have been successfully prepared via a single-nozzle wet-spinning technique. Results show that the fibers possess fascinating specific surface area (184.8 m2·g-1), electrical conductivity (50 S·cm-1), and stretchability (>100%) because of the novel preparation method and hierarchical morphological design. Through simple textile manufacturing routes, PPP fibers can be woven into fabrics easily, which exhibit desirable breathability, washability, and mechanical strength for smart textiles while maintaining favorable hygroscopicity. Benefiting from the textured structure with large specific surface area, PPP fabric exhibits attractile evaporative cooling rate. Practical application tests have demonstrated that under direct sunlight, the surface temperature of the PPP fabric is ∼5.2 and ∼10.8 °C lower than commercial cotton and polyester fabrics, respectively. Meanwhile, as conductive fibers, the resultant PPP fabric can heat under low-power electricity, therefore achieving the effect of "warmth in winter and coolness in summer". The facile fabrication process and elevated performance of PPP fibers present significant advantages for applications in intelligent garments and textiles, as well as comprehensive personal thermal management, which opens a new avenue for future design in these fields.

Mussel-inspired lignin decorated cellulose nanocomposite tough organohydrogel sensor with conductive, transparent, strain-sensitive and durable properties

A novel gel-based wearable sensor with environment resistance (anti-freezing and anti-drying), excellent strength, high sensitivity and self-adhesion was prepared by introducing biomass materials including both lignin and cellulose. The introduction of lignin decorated CNC (L-CNC) to the polymer network acted as nano-fillers to improve the gel's mechanical with high tensile strength (72 KPa at 25 °C, 77 KPa at -20 °C), excellent stretchability (803 % at 25 °C, 722 % at -20 °C). The abundant catechol groups formed in the process of dynamic redox reaction between lignin and ammonium persulfate endowed the gel with robust tissue adhesiveness. Impressively, the gel exhibited outstanding environment resistance, which could be stored for a long time (>60 days) in an open-air environment with a wide work temperature range (-36.5 °C-25 °C). Based on these significant properties, the integrated wearable gel sensor showed superior sensitivity (gauge factor = 3.11 at 25 °C and 2.01 at -20 °C) and could detect human activities with excellent accuracy and stability. It is expected that this work will provide a promising platform for fabricating and application of a high-sensitive strain conductive gel with long-term usage and stability.

Thermal Nociception of Ionic Skin: TRPV1 Ion Channel-Inspired Heat-Activated Dynamic Ionic Liquid

The artificial reproduction of the tactile sensory function of natural skin is crucial for intelligent sensing, human-computer interaction, and medical health. Thermal nociception is an essential human tactile function to avoid noxious thermal stimuli, which depends on the specific heat-activation of the TRPV1 ion channel. Inspired by the TRPV1, a dynamic ionic liquid with heat-activation characteristics is designed and prepared, which can be activated at 45 °C, which is near the physiological noxious temperature, accompanied by a steep rise in electrical response signals. Its electrical behavior can be deemed to be the extreme version of temperature sensation similar to the natural thermal nociceptor. The heat-activation mechanism is confirmed as a feasible strategy to regulate the thermal response behavior of ions, and this reported dynamic ionic liquid has an unprecedented intrinsic temperature response sensitivity of up to 156.79%/°C. In consideration of the similarity between the heat-activated dynamic ionic liquid and the TRPV1 ion channel in terms of heat-activation characteristics, electrical output signal, and ultrathermal sensitivity, an all-liquid ionic skin with the ability of thermal nociception is further fabricated, which shows considerable potential to assist patients with tactile desensitization to avoid noxious thermal stimuli.

Synthesis, Characterization, Biological Evaluation, and In Silico Studies of Imidazolium-, Pyridinium-, and Ammonium-Based Ionic Liquids Containing n-Butyl Side Chains

Ionic liquids (ILs) have emerged as active pharmaceutical ingredients because of their excellent antibacterial and biological activities. Herein, we used the green-chemistry-synthesis procedure, also known as the metathesis method, to develop three series of ionic liquids using 1-methyl-3-butyl imidazolium, butyl pyridinium, and diethyldibutylammonium as cations, and bromide (Br⁻), methanesulfonate (CH₃SO₃⁻), bis(trifluoromethanesulfonyl)imide (NTf₂⁻), dichloroacetate (CHCl₂CO₂⁻), tetrafluoroborate (BF₄⁻), and hydrogen sulfate (HSO₄⁻) as anions. Spectroscopic methods were used to validate the structures of the lab-synthesized ILs. We performed an agar well diffusion assay by using pathogenic bacteria that cause various infections (Escherichia coli; Enterobacter aerogenes; Klebsiella pneumoniae; Proteus vulgaris; Pseudomonas aeruginosa; Streptococcus pneumoniae; Streptococcus pyogenes) to scrutinize the in vitro antibacterial activity of the ILs. It was established that the nature and unique combination of the cations and anions were responsible for the antibacterial activity of the ILs. Among the tested ionic liquids, the imidazolium cation and NTf₂⁻ and HSO₄⁻ anions exhibited the highest antibacterial activity. The antibacterial potential was further investigated by in silico studies, and it was observed that bis(trifluoromethanesulfonyl)imide (NTf₂⁻) containing imidazolium and pyridinium ionic liquids showed the maximum inhibition against the targeted bacterial strains and could be utilized in antibiotics. These antibacterial activities float the ILs as a promising alternative to the existing antibiotics and antiseptics.

Correlation between ordering and shear thinning in confined OMCTS liquids

Despite the extensive research that has been conducted for decades on the behavior of confined liquids, detailed knowledge of this phenomenon, particularly in the mixed/boundary lubrication regime, remains limited. This can be attributed to several factors including the difficulty of direct experimental observations of the behavior of lubricant molecules under non-equilibrium conditions, the high computational cost of molecular simulations to reach steady state, and the low signal-to-noise ratio at extremely low shear rates corresponding to actual operating conditions. To this end, we studied the correlation between the structure formation and shear viscosity of octamethylcyclotetrasiloxane confined between two mica surfaces in a mixed/boundary lubrication regime. Three different surface separations corresponding to two-, three-, and five-layered structures were considered to analyze the effect of confinement. The orientational distributions with one specific peak for n=2 and two distributions, including a parallel orientation with the surface normal for n>2, were observed at rest. The confined liquids exhibited a distinct shear-thinning behavior independent of surface separations for a relatively low shear rate, \dot{\gamma}<10^{8} s^{-1}. However, the shear viscosities at \dot{\gamma}<10^{8} s^{-1} depended on the number of layered structures. Newtonian behavior was observed with a further increase in the shear rate. Furthermore, we found a strong correlation between the degree of molecular orientation and the shear viscosity of the confined liquids. The magnitude of the shear viscosity of the confined liquids can primarily be determined by the degree of molecular orientation, and shear-thinning originates from the vanishing of specific orientational distributions with increasing shear rate.

Wearable Ionogel-Based Fibers for Strain Sensors with Ultrawide Linear Response and Temperature Sensors Insensitive to Strain

Fiber-shaped stretchable strain and temperature sensors are highly desirable for wearable electronics due to their excellent flexibility, comfort, air permeability, and easiness to be weaved into fabric. Herein, we prepare a smart ionogel-based fiber composed of thermoplastic polyurethane (TPU) and ionic liquid (IL) by the facile and scalable wet-spinning technique, which can serve as a wearable strain sensor with good linearity (a correlation coefficient of 0.997) in an ultrawide sensing range (up to 700%), ultralow-detection limit (0.05%), fast response (173 ms) and recovery (120 ms), and high reproducibility. Attributed to these outstanding strain sensing performances, the designed TPU/IL ionogel fiber-shaped sensor is able to monitor both subtle physiological activities and large human motions. More interestingly, because of the fast response and high resolution to strain, the fiber-shaped sensor can be sewn into the fabric to secretly encrypt and wirelessly translate message according to the principle of Morse code. More importantly, a wearable strain-insensitive temperature sensor can be obtained from the ionogel fiber if it is designed into an "S" shape, which can effectively eliminate the interference of strain on temperature sense. It is found that the inaccuracy of temperature sense is within 0.15 °C when the sensor is subjected to 30% tensile strain simultaneously. Moreover, this strain-insensitive temperature sensor shows a monotonic temperature response over a wide temperature range (-15 to 100 °C) with an ultrahigh detecting accuracy of 0.1 °C and good reliability, owing to the fast and stable thermal response of IL. This temperature sensor can realize the detection of thermal radiation, proximity, and respiration, exhibiting enormous potential in smart skin, personal healthcare, and wearable electronics. This work proposes a simple but effective strategy to realize the essential strain and temperature sensing capabilities of wearable electronics and smart fabrics without mutual interference.

Comparison between Ab Initio Molecular Dynamics and OPLS-Based Force Fields for Ionic Liquid Solvent Organization

OPLS-based force fields (FFs) have been shown to provide accurate bulk-phase properties for a wide variety of imidazolium-based ionic liquids (ILs). However, the ability of OPLS to reproduce an IL solvent structure is not as well-validated given the relative lack of high-level theoretical or experimental data available for comparison. In this study, ab initio molecular dynamics (AIMD) simulations were performed for three widely used ILs: the 1-butyl-3-methylimidazolium cation with chloride, tetrafluoroborate, or hexafluorophosphate anions, that is, [BMIM][Cl], [BMIM][BF₄], and [BMIM][PF₆], respectively, as a basis for further assessment of two unique IL FFs: the ±0.8 charge-scaled OPLS-2009IL FF and the OPLS-VSIL FF. The OPLS-2009IL FF employs a traditional all-atom functional form, whereas the OPLS-VSIL FF was developed using a virtual site that offloads negative charge to inside the plane of the ring with careful attention given to reproducing hydrogen bonding. Detailed comparisons between AIMD and the OPLS FFs were made based on radial distribution functions (RDFs), combined distribution functions (CDFs), and spatial distribution functions (SDFs) to examine cation-anion interactions and π⁺-π⁺ stacking between the imidazolium rings. While both FFs were able to correctly capture the general solvent structure of these popular ILs, the OPLS-VSIL FF quantitatively reproduced interaction distances more accurately. In addition, this work provides further insights into the different short- and long-range structure patterns of these popular ILs.

Insights into Ionic Liquids: From Z-Bonds to Quasi-Liquids

Ionic liquids (ILs) hold great promise in the fields of green chemistry, environmental science, and sustainable technology due to their unique properties, such as a tailorable structure, the various types available, and their environmentally friendly features. On the basis of multiscale simulations and experimental characterizations, two unique features of ILs are as follows: (1) strong coupling interactions between the electrostatic forces and hydrogen bonds, namely in the Z-bond, and (2) the unique semiordered structure and properties of ultrathin films, specifically regarding the quasi-liquid. In accordance with the aforementioned theoretical findings, many cutting-edge applications have been proposed: for example, CO₂ capture and conversion, biomass conversion and utilization, and energy storage materials. Although substantial progress has been made recently in the field of ILs, considerable challenges remain in understanding the nature of and devising applications for ILs, especially in terms of e.g. in situ/real-time observation and highly precise multiscale simulations of the Z-bond and quasi-liquid. In this Perspective, we review recent developments and challenges for the IL research community and provide insights into the nature and function of ILs, which will facilitate future applications.

Tough, Transparent, 3D-Printable, and Self-Healing Poly(ethylene glycol)-Gel (PEGgel)

Polymer gels, such as hydrogels, have been widely used in biomedical applications, flexible electronics, and soft machines. Polymer network design and its contribution to the performance of gels has been extensively studied. In this study, the critical influence of the solvent nature on the mechanical properties and performance of soft polymer gels is demonstrated. A polymer gel platform based on poly(ethylene glycol) (PEG) as solvent is reported (PEGgel). Compared to the corresponding hydrogel or ethylene glycol gel, the PEGgel with physically cross-linked poly(hydroxyethyl methacrylate-co-acrylic acid) demonstrates high stretchability and toughness, rapid self-healing, and long-term stability. Depending on the molecular weight and fraction of PEG, the tensile strength of the PEGgels varies from 0.22 to 41.3 MPa, fracture strain from 12% to 4336%, modulus from 0.08 to 352 MPa, and toughness from 2.89 to 56.23 MJ m^-3 . Finally, rapid self-healing of the PEGgel is demonstrated and a self-healing pneumatic actuator is fabricated by 3D-printing. The enhanced mechanical properties of the PEGgel system may be extended to other polymer networks (both chemically and physically cross-linked). Such a simple 3D-printable, self-healing, and tough soft material holds promise for broad applications in wearable electronics, soft actuators and robotics.

Robotic Manipulation under Harsh Conditions Using Self-Healing Silk-Based Iontronics

Progress toward intelligent human-robotic interactions requires monitoring sensors that are mechanically flexible, facile to implement, and able to harness recognition capability under harsh environments. Conventional sensing methods have been divided for human-side collection or robot-side feedback and are not designed with these criteria in mind. However, the iontronic polymer is an example of a general method that operates properly on both human skin (commonly known as skin electronics or iontronics) and the machine/robotic surface. Here, a unique iontronic composite (silk protein/glycerol/Ca(II) ion) and supportive molecular mechanism are developed to simultaneously achieve high conductivity (around 6 kΩ at 50 kHz), self-healing (within minutes), strong stretchability (around 1000%), high strain sensitivity and transparency, and universal adhesiveness across a broad working temperature range (-40-120 °C). Those merits facilitate the development of iontronic sensing and the implementation of damage-resilient robotic manipulation. Combined with a machine learning algorithm and specified data collection methods, the system is able to classify 1024 types of human and robot hand gestures under challenging scenarios and to offer excellent object recognition with an accuracy of 99.7%.

Liquid-Based Adaptive Structural Materials

Structural materials are used to provide stable mechanical architectures and transmit or support forces, and they play an important role in materials science and technology. During the long process of the exploitation of structural materials, the functionality of structural materials has gained prominence. Adaptive structures responding to external stimuli have come to the fore with significant advantages in structural materials. However, many solid adaptive structural materials still suffer from their single function and the lack of dynamic performance, such as issue around fouling and energy consumption, defects present everywhere in materials at the microscale, etc. To meet the increasing demands, more and more researchers have started turning their attention to liquid-based materials owing to their intrinsic spontaneous, dynamic, and functional properties. Liquid-based adaptive structural materials (LASMs) have been proposed and developed. Building upon both dynamic liquids and fixed solids, LASMs have been demonstrated to possess both dynamic adaptivity (from the active liquid part) and stable mechanical structure (from the fixed solid part), which are desired in many applications such as 3D printing, droplet manipulation, omniphobic surfaces, microfluidics, mass separation, etc. A unifying view of the recent progress of LASMs is presented, including liquid with particles, liquid with surfaces, as well as liquid with membranes. In addition, the discussion of the prospects and challenges are provided for promoting the development of LASMs.

Ultrastretchable and Stable Conductive Elastomer Based on Micro-Ionicgel for Wide-Working-Range Sensors

A facile route to novel stretchable conductive elastomers with micro-ionicgel acting as conductive fillers was developed via oil-in-oil Pickering emulsion polymerization of nonpolar monomers A and a mixture of polar monomers B and ionic liquids (ILs). Oil-in-oil Pickering emulsions were first fabricated by mixing n-butyl acrylate (n-BA), acrylic acid (AA), ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, [EMIM]+[BF4]-), and alkyl vinyl-functionalized silica particles. The emulsion structure was directly observed using the dye-labeled AA-IL phase by confocal fluorescence microscopy. Upon polymerization, the IL-based conductive composite elastomers were obtained, where the continuous phase and the dispersed phase are poly(n-butyl acrylate) (PnBA) and poly(acrylic acid) containing ILs (PAA-ILs, referred to as micro-ionicgel), respectively. The PnBA matrix endows the formed elastomer with extremely large stretchability (up to 12 000% strain) and insensitivity to moisture. The micro-ionicgels PAA-ILs not only contribute to good conductivity but can also prevent the leakage of ILs upon stretching or folding. The electrical impedance-based stretchable sensors fabricated using this IL elastomer could detect various human motions including the bending of a finger, wrist, elbow, and knee. Therefore, the as-developed sensors show promising applications for human-machine interfaces of flexible wearable sensors.

Breathable Strain/Temperature Sensor Based on Fibrous Networks of Ionogels Capable of Monitoring Human Motion, Respiration, and Proximity

Wearable strain and temperature sensors are desired for human-machine interfaces, health monitoring, and human motion monitoring. Herein, the fibrous mat with aligned nanofibers of ionic liquid (IL)/thermoplastic polyurethane (TPU) ionogels is fabricated via an electrospinning technique. The resultant fibrous mat is cut into a rectangle specimen and electrodes are loaded along the direction perpendicular to the nanofiber orientation to design a high-performance multimodal sensor based on an ionic conducting mechanism. As a strain sensor, the obtained sensor exhibits a wide strain working range (0-200%), a fast response and recovery (119 ms), a low detection limit (0.1%), and good reproducibility because of the reversible and deformable ionic conductive pathways of the sensor. Moreover, the sensor also exhibits excellent temperature-sensing behaviors, including a monotonic thermal response, high sensitivity (2.75% °C^-1), high accuracy (0.1 °C), a fast response time (2.46 s), and remarkable repeatability, attributable to the negative temperature coefficient behavior of the IL/TPU fibrous mat. More interestingly, the IL/TPU fibrous sensor possesses good breathability, which is desired for wearable electronics. Because of these excellent sensing capabilities in strain and temperature, the sensor can not only monitor tiny and large human motions but also detect respiration and proximity, exhibiting enormous potential in wearable electronics.

Soft nanoconfinement of ionic liquids in lyotropic liquid crystals

Nanoconfinement of ionic liquids (ILs) influences their physicochemical properties. In this study, we investigate the effect of soft nanoconfinement imposed by lyotropic liquid crystals (LLCs) on ILs. The LLC ion gels are obtained through self-assembly of a short chain block copolymer (BCP) of polyethylene-block-poly(ethylene oxide), PE-b-PEO, in ILs. The effect of confinement on the interaction of ions with PEO is investigated through electrochemical impedance spectroscopy (EIS) and carbon dioxide (CO₂) absorption measurements. The results show that the synergistic effect on the CO₂ absorption capacity of LLC ion gels takes place as a result of confinement. Formation of IL pathways through the LLC increases the CO₂ solubility, absorption capacity, and absorption rate. Increasing the concentration of block copolymer in the LLC structure enhances the dissociation of ILs and consequently lowers CO₂ absorption. Therefore, the competing effects of confinement and IL-PEO interaction control the properties of LLC ion gels.

Ionic Network Based on Dynamic Ionic Liquids for Electronic Tattoo Application

Electronic tattoos as an emerging epidermal electronic are alluring in the field of wearable electronics for their lightweight and noninvasive properties. However, the combination of flexibility, skin biocompatibility, adhesion, repairability, and erasability remains a challenge for fabricating electronic tattoos. Hence, a dynamic ionic liquid is prepared which is ideally suited for making an electronic tattoo with these challenging features at the same time. Such an intrinsically flexible electronic tattoo can be firmly attached to human skin with negligible irritation. More importantly, the existence of dynamic covalent chemistry provides the electronic tattoo with healing and erasable abilities under mild redox conditions. Owing to the high ionic conductivity of ionic liquids, the electronic tattoo exhibits excellent sensing performance in response to the temperature variation and tensile strain, which can intelligently monitor body temperature, pulse, and movement. As an extension of the application, a specially designed quadrilateral electronic tattoo can sense and distinguish multiple signals simultaneously. This concept of electronic tattoo based on the dynamic ionic liquid shows great potentials in the applications of intelligent wearable electronics.

Visualizing thermal distribution through hydrogel confined ionic system

Effective thermal regulation has shown great impacts on tremendous aspects of our life and manufacture. However, the invisible nature of thermal field brings us inconvenience or even security hazard. Herein, we present a method to visualize thermal distribution with the aid of a thermally active material. An ionic liquid with lower critical solution temperature is mixed within hydrogel to demonstrate a hydrogel confined ionic system (HCIS). This particular system turns turbid as the temperature exceeds an established temperature threshold, which is adjustable through applying different concentrations of HCl or NaCl. The system offers straightforward images of the spatial thermal distribution whether simple or sophisticated, which is fully in line with computational simulation. The system is further demonstrated with great promise for the application in fire warning to lower the threat induced by electrical failure. The HCIS opens a practical avenue to visualize thermal distribution and improve our thermal regulation efficiency.

Conductive Hydrogel- and Organohydrogel-Based Stretchable Sensors

Conductive hydrogels have drawn significant attention in the field of stretchable/wearable sensors due to their intrinsic stretchability, tunable conductivity, biocompatibility, multistimuli sensitivity, and self-healing ability. Recent advancements in hydrogel- and organohydrogel-based sensors, including a novel sensing mechanism, outstanding performance, and broad application scenarios, suggest the great potential of hydrogels for stretchable electronics. However, a systematic summary of hydrogel- and organohydrogel-based sensors in terms of their working principles, unique properties, and promising applications is still lacking. In this spotlight, we present recent advances in hydrogel- and organohydrogel-based stretchable sensors with four main sections: improved stability of hydrogels, fabrication and characterization of organohydrogel, working principles, and performance of different types of sensors. We particularly highlight our recent work on ultrastretchable and high-performance strain, temperature, humidity, and gas sensors based on polyacrylamide/carrageenan double network hydrogel and ethylene glycol/glycerol modified organohydrogels obtained via a facile solvent displacement strategy. The organohydrogels display higher stability (drying and freezing tolerances) and sensing performances than corresponding hydrogels. The sensing mechanisms, key factors influencing the performance, and application prospects of these sensors are revealed. Especially, we find that the hindering effect of polymer networks on the ionic transport is one of the key mechanisms applicable for all four of these kinds of sensors.

Thermoelectric Converters Based on Ionic Conductors

Thermoelectric materials represent a new paradigm for harvesting low-grade heat, which would otherwise be dissipated to the environment uselessly. Relative to conventional thermoelectric materials generally composed of semiconductors or semi-metals, ionic thermoelectric materials are rising as an alternative choice which exhibit higher Seebeck coefficient and lower thermal conductivity. The ionic thermoelectric materials own a completely different thermoelectric conversion mechanism, in which the ions do not enter the electrode but rearrange on the electrode surface to generate a voltage difference between the hot and cold electrodes. This unique character has inspired worldwide interests on the design of ionic-type thermoelectric converters with attractive advantages of high flexibility, low cost, limited environmental pollution, and self-healing capability. Referring to the categories of ionic thermoelectric conversion, some representative ionic thermoelectric materials with their respective characteristics are summarized in this minireview. In addition, examples of applying ionic thermoelectric materials in supercapacitors, wearable devices, and fire warning system are also discussed. Insight into the challenges for the further development of ionic thermoelectric materials is finally provided.

Shape-adaptable biodevices for wearable and implantable applications

Emerging wearable and implantable biodevices have been significantly revolutionizing the diagnosis and treatment of disease. However, the geometrical mismatch between tissues and biodevices remains a great challenge for achieving optimal performances and functionalities for biodevices. Shape-adaptable biodevices enabling active compliance with human body tissues offer promising opportunities for addressing the challenge through programming their geometries on demand. This article reviews the design principles and control strategies for shape-adaptable biodevices with programmable shapes and actively compliant capabilities, which have offered innovative diagnostic/therapeutic tools and facilitated a variety of wearable and implantable applications. The state-of-the-art progress in applications of shape-adaptable biodevices in the fields of smart textiles, wound care, healthcare monitoring, drug and cell delivery, tissue repair and regeneration, nerve stimulation and recording, and biopsy and surgery, is highlighted. Despite the remarkable advances already made, shape-adaptable biodevices still confront many challenges on the road toward the clinic, such as enhanced intelligence for actively sensing and operating in response to physiological environments. Next-generation paradigms will shed light on future directions for extending the breadth and performance of shape-adaptable biodevices for wearable and implantable applications.

Mechanically Robust, Elastic, and Healable Ionogels for Highly Sensitive Ultra-Durable Ionic Skins

The fabrication of highly durable skin-mimicking sensors remains challenging because of the unavoidable fatigue and physical damage that sensors are subjected to in practical applications. In this study, ultra-durable ionic skins (I-skins) with excellent healability and high sensitivity are fabricated by impregnating ionic liquids (ILs) into a mechanically robust poly(urea-urethane) (PU) network. The PU network is composed of crystallized poly(ε-caprolactone) and flexible poly(ethylene glycol) that are dynamically cross-linked with hindered urea bonds and hydrogen bonds. Such a design endows the resultant ionogels with high mechanical strength, good elasticity, Young's modulus similar to that of natural skin, and excellent healability. The ionogel-based I-skins exhibit a high sensitivity to a wide range of strains (0.1-300%) and pressures (0.1-20 kPa). Importantly, the I-skins show a highly reproducible electrical response over 10 000 uninterrupted strain cycles. The sensing performance of the I-skins stored in open air for 200 days is almost the same as that of the freshly prepared I-skin. The fractured I-skins can be easily healed by heating at 65 °C that restores their original ultra-durable sensing performance. The long-term durability of the I-skins is attributed to the combination of non-volatility of the ILs, excellent healability, and well-designed mechanical properties.

Microstructural and Dynamical Heterogeneities in Ionic Liquids

Ionic liquids (ILs) are a special category of molten salts solely composed of ions with varied molecular symmetry and charge delocalization. The versatility in combining varied cation-anion moieties and in functionalizing ions with different atoms and molecular groups contributes to their peculiar interactions ranging from weak isotropic associations to strong, specific, and anisotropic forces. A delicate interplay among intra- and intermolecular interactions facilitates the formation of heterogeneous microstructures and liquid morphologies, which further contributes to their striking dynamical properties. Microstructural and dynamical heterogeneities of ILs lead to their multifaceted properties described by an inherent designer feature, which makes ILs important candidates for novel solvents, electrolytes, and functional materials in academia and industrial applications. Due to a massive number of combinations of ion pairs with ion species having distinct molecular structures and IL mixtures containing varied molecular solvents, a comprehensive understanding of their hierarchical structural and dynamical quantities is of great significance for a rational selection of ILs with appropriate properties and thereafter advancing their macroscopic functionalities in applications. In this review, we comprehensively trace recent advances in understanding delicate interplay of strong and weak interactions that underpin their complex phase behaviors with a particular emphasis on understanding heterogeneous microstructures and dynamics of ILs in bulk liquids, in mixtures with cosolvents, and in interfacial regions.

Self-Powered and Green Ionic-Type Thermoelectric Paper Chips for Early Fire Alarming

Early fire alarming is of vital importance to lower the damages led by forest fires. Thus far, methods to monitor the forest fires at their early stage are mainly focused on artificial ground patrol, unmanned aerial vehicle cruise monitoring, observation by watchtower, or satellite inspection, whereas these methods are practically encountered with the problems of untimely feedback before the forest fires are out of control. This work proposes a particular kind of self-powered, low-cost, and green thermoelectric paper chips based on the principle of self-assembly and disassembly of ionic liquids on the surface of gold electrodes. By adjustment of the species of ionic liquids, both "n- and p-type" thermoelectric behaviors have been exploited that correspond to the opposite open-circuit voltages. Owing to the fluidic nature of ionic liquids, those "n- and p-type" thermoelectric units can be readily connected in series on one paper chip, leading to remarkable voltage signals in the presence of the temperature difference of 35 K. Followed by signal acquisition and transmission, such a thermoelectric paper chip successfully affords immediate electrical alarming at the early stage of an afire circumstance.

Accurate Diels-Alder Energies and Endo Selectivity in Ionic Liquids Using the OPLS-VSIL Force Field

Our recently developed optimized potentials for liquid simulations-virtual site ionic liquid (OPLS-VSIL) force field has been shown to provide accurate bulk phase properties and local ion-ion interactions for a wide variety of imidazolium-based ionic liquids. The force field features a virtual site that offloads negative charge to inside the plane of the ring with careful attention given to hydrogen bonding interactions. In this study, the Diels-Alder reaction between cyclopentadiene and methyl acrylate was computationally investigated in the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF₆], as a basis for the validation of the OPLS-VSIL to properly reproduce a reaction medium environment. Mixed ab initio quantum mechanics and molecular mechanics (QM/MM) calculations coupled to free energy perturbation and Monte Carlo sampling (FEP/MC) that utilized M06-2X/6-31G(d) and OPLS-VSIL gave activation free energy barriers of 14.9 and 16.0 kcal/mol for the endo-cis and exo-cis Diels-Alder reaction pathways, respectively (exptl. ΔH^‡ of 14.6 kcal/mol). The endo selectivity trend was correctly predicted with a calculated 73% endo preference. The rate and selectivity enhancements present in the endo conformation were found to arise from preferential hydrogen bonding with the exposed C4 ring hydrogen on the BMIM cation. Weaker electronic stabilization of the exo transition state was predicted. For comparison, our earlier ±0.8 charge-scaled OPLS-2009IL force field also yielded a ΔG^‡ of 14.9 kcal/mol for the favorable endo reaction pathway but did not adequately capture the highly organized solvent interactions present between the cation and Diels-Alder transition state.

Versatile Electronic Skins with Biomimetic Micronanostructures Fabricated Using Natural Reed Leaves as Templates

Versatile electronic skin devices that enable detection of multimodal signals have revealed great potential for human health monitoring. To make a versatile electronic skin, hierarchical micronanostructures are essential to obtain improved sensing performance and multisignal detection capability. However, current strategies for developing a nanostructured electronic skin usually involve complex procedures, harsh experimental conditions, and the use of expensive equipment, which limit its practical applications. In this paper, we reported the fabrication of a multifunctional wearable electronic skin with hierarchical micronanostructures by using natural reed leaves as templates. The capacitive-type electronic skin is fabricated by double-sided coating of Au electrodes on an artificial polydimethylsiloxane reed leaf that is duplicated from natural reed leaves via soft lithography. The electronic skin features a very simple device structure yet high sensing performance. It permits multimodal signal detection, including that of pressure, deformation, and proximity, and can serve as surface-enhanced Raman scattering substrates for the detection of metabolites in sweat because of the formation of plasmonic structures. The versatile electronic skin can be attached to the human skin, and it enables effective monitoring of multiphysiological signals, revealing great potential for cutting-edge applications, such as human health monitoring.