Topological Lifshitz transitions and Fermi arc manipulation in Weyl semimetal NbAs

Quantum-Confined Lifshitz Transition on Weyl Semimetal Td-MoTe2

Adsorption of alkali atoms onto material surfaces is widely utilized for controlling electronic properties and is particularly effective for two-dimensional materials. While tuning the chemical potential and band gap and creating quantum-confined states are well established for alkali adsorption on semiconductors, the effects on semimetallic systems remain largely elusive. Here, utilizing angle-resolved photoemission spectroscopy measurements and density functional theory calculations, we disclose the creation of two-dimensional electron gas and the quantum-confined Lifshitz transition at the surface of a Weyl semimetal Td-MoTe2 by potassium adsorption. Electrons from potassium adatoms are shown to be transferred mainly to the lowest unoccupied band within the gapped part of the Brillouin zone, which, in turn, induces strong surface band bending and quantum confinement in the topmost layer. The quantum-confined topmost layer evolves from a semimetal to a strong metal with a Lifshitz transition departing substantially from the bulk band. The present finding and its underlying mechanism can be exploited for the creation of electronic heterojunctions in van der Waals semimetals.

Lifshitz Transition in a Single-Atom-Thick GdxYb1-xPb3 Kagome Compound on Si(111)

Lanthanide (Ln) elements Gd and Yb alloyed with a Pb monolayer on the Si(111) substrate form LnPb3 compounds having the same crystal structure. They comprise a single-atom-thick Pb layer arranged in a slightly distorted kagome lattice with Ln atoms filling the hexagonal voids. They have similar electronic band structures except for the Fermi level position, which varies between the divalent Yb- and trivalent Gd-containing compounds by ∼0.47 eV. The ability to create a 2D solid solution with the unified continuous Pb layer and hexagonal voids randomly filled with either Gd or Yb atoms allows precise control of the Fermi level position. Small alteration of the Fermi level triggers drastic changes in the Fermi surface topology due to the Lifshitz transition, hence in the physical properties. In particular, the sheet resistance of the GdxYb1-xPb3/Si(111) system can be controllably varied over an order of magnitude range.

Singular Hall Response from a Correlated Ferromagnetic Flat Nodal-Line Semimetal

Topological quantum phases are largely understood in weakly correlated systems, which have identified various quantum phenomena, such as the spin Hall effect, protected transport of helical fermions, and topological superconductivity. Robust ferromagnetic order in correlated topological materials particularly attracts attention, as it can provide a versatile platform for novel quantum devices. Here, a singular Hall response arising from a unique band structure of flat topological nodal lines in combination with electron correlation in a van der Waals ferromagnetic semimetal, Fe3GaTe2, with a high Curie temperature of Tc = 347 K is reported. High anomalous Hall conductivity violating the conventional scaling, resistivity upturn at low temperature, and a large Sommerfeld coefficient are observed in Fe3GaTe2, which implies heavy fermion features in this ferromagnetic topological material. The scanning tunneling microscopy, circular dichroism in angle-resolved photoemission spectroscopy, and theoretical calculations support the original electronic features of the material. Thus, low-dimensional Fe3GaTe2 with electronic correlation, topology, and room-temperature ferromagnetic order appears to be a promising candidate for robust quantum devices.

Tunable hybrid-order Weyl semimetal via staggered magnetic flux

We investigate a hybrid-order Weyl semimetal (HOWS) constructed by stacking the two-dimensional kagome lattice with staggered magnetic flux. By adjusting the magnitude of flux, higher-order topological phases are tunably intertwined with the first-order topological Chern insulators, which is governed by the evolution of Weyl points. Meanwhile the surface Fermi arcs undergo topological Lifshitz transition. Notably, due to the breaking of time-reversal symmetry (TRS), a novel split of a quadratic double Weyl point occurs, giving rise to additional three type-II Weyl points hybridizing with one type-I node. This phenomenon plays a crucial role in realizing high-Chern-number phases withC=±2and reveals a new mechanism for the emergence of type-II Weyl fermions in topological kagome semimetals. We anticipate that this study will stimulate further investigation into the unique physics of kagome materials and Weyl semimetals.

Influence of Lifshitz Transition on the Intrinsic Resistivity of Cu2N Monolayer

The Lifshitz transition (LT), a topological structure transition of Fermi surfaces, can induce various intricate physical properties in metallic materials. In this study, through first-principles calculations, we explore the nontrivial effect of the LT on the intrinsic resistivity of the Cu2N monolayer arising from electron-phonon (el-ph) scattering. We find that when the LT is induced by electron doping, the multibranch Fermi surface simplifies into a single-band profile. Such an LT leads to a decoupling of low-frequency flexural phonons from el-ph scattering due to mirror symmetry. Consequently, the resistivity of the Cu2N monolayer at room temperature significantly decreases, approaching that of slightly doped graphene, and highlighting the Cu2N monolayer as a highly conductive two-dimensional metal. Moreover, this LT can bring about a nonlinear temperature dependence of the intrinsic resistivity at a high temperature.

Photonic Weyl Waveguide and Saddle-Chips-like Modes

Topological Weyl semimetals are characterized by open Fermi arcs on their terminal surfaces, these materials not only changed accepted concepts of the Fermi loop but also enabled many exotic phenomena, such as one-way propagation. The key prerequisite is that the two terminal surfaces have to be well separated, i.e., the Fermi arcs are not allowed to couple with each other. Thus, their interaction was overlooked before. Here, we consider coupled Fermi arcs and propose a Weyl planar waveguide, wherein we found a saddle-chips-like hybridized guiding mode. The hybridized modes consist of three components: surface waves from the top and bottom surfaces and bulk modes inside the Weyl semimetal. The contribution of these three components to the hybridized mode appears to be z-position-dependent rather than uniform. Beyond the conventional waveguide framework, those non-trivial surface states, with their arc-type band structures, exhibit strong selectivity in propagation direction, providing an excellent platform for waveguides. Compared with the conventional waveguide, the propagation direction of hybridized modes exhibits high z-position-dependency. For example, when the probe plane shifts from the top interface to the bottom interface, the component propagating horizontally becomes dimmer, while the component propagating vertically becomes brighter. Experimentally, we drilled periodic holes in metal plates to sandwich an ideal Weyl meta-crystal and characterize the topological guiding mode. Our study shows the intriguing behaviors of topological photonic waveguides, which could lead to beam manipulation, position sensing, and even 3D information processing on photonic chip. The Weyl waveguide also provides a platform for studying the coupling and the interaction between surface and bulk states.

Twisted photonic Weyl meta-crystals and aperiodic Fermi arc scattering

As a milestone in the exploration of topological physics, Fermi arcs bridging Weyl points have been extensively studied. Weyl points, as are Fermi arcs, are believed to be only stable when preserving translation symmetry. However, no experimental observation of aperiodic Fermi arcs has been reported so far. Here, we continuously twist a bi-block Weyl meta-crystal and experimentally observe the twisted Fermi arc reconstruction. Although both the Weyl meta-crystals individually preserve translational symmetry, continuous twisting operation leads to the aperiodic hybridization and scattering of Fermi arcs on the interface, which is found to be determined by the singular total reflection around Weyl points. Our work unveils the aperiodic scattering of Fermi arcs and opens the door to continuously manipulating Fermi arcs.

ARPES investigation of the electronic structure and its evolution in magnetic topological insulator MnBi2+2nTe4+3n family

In the past 5 years, there has been significant research interest in the intrinsic magnetic topological insulator family compounds MnBi2+2nTe4+3n (where n = 0, 1, 2 …). In particular, exfoliated thin films of MnBi2Te4 have led to numerous experimental breakthroughs, such as the quantum anomalous Hall effect, axion insulator phase and high-Chern number quantum Hall effect without Landau levels. However, despite extensive efforts, the energy gap of the topological surface states due to exchange magnetic coupling, which is a key feature of the characteristic band structure of the system, remains experimentally elusive. The electronic structure measured by using angle-resolved photoemission (ARPES) shows significant deviation from ab initio prediction and scanning tunneling spectroscopy measurements, making it challenging to understand the transport results based on the electronic structure. This paper reviews the measurements of the band structure of MnBi2+2nTe4+3n magnetic topological insulators using ARPES, focusing on the evolution of their electronic structures with temperature, surface and bulk doping and film thickness. The aim of the review is to construct a unified picture of the electronic structure of MnBi2+2nTe4+3n compounds and explore possible control of their topological properties.

Photonic topological Lifshitz interfaces

The intrinsic geometry of wavevector diagrams describes electronic or photonic transport at a given energy level. Lifshitz transition is an intriguing example of the topological transition in wavevector diagrams, which plays a critical role in abnormal transport with enhanced magnetoresistance or superconductivity. Here, we develop the spatial analogy of the Lifshitz transition, which provides a comprehensive topological perspective on transverse-spin interface states. We establish the excitation conditions of transverse-spin interface states, which require the "Lifshitz interface" - the interface between different topologies of wavevector diagrams - along with the gap in wavevector diagrams. Based on the detailed analysis of this topological phenomenon with respect to the dimensionality and gaps of wavevector diagrams across the Lifshitz interface, we show distinct parity of transverse spins and power flows in transverse-spin modes. The unique symmetry of interface states realizing Abraham-spin-momentum locking represents the gauge induced by the Lifshitz interface, which provides a novel insight into the Abraham-Minkowski controversy.

Field-Tunable One-Sided Higher-Order Topological Hinge States in Dirac Semimetals

Recently, higher-order topological matter and 3D quantum Hall effects have attracted a great amount of attention. The Fermi-arc mechanism of the 3D quantum Hall effect proposed to exist in Weyl semimetals is characterized by the one-sided hinge states, which do not exist in all the previous quantum Hall systems, and more importantly, pose a realistic example of the higher-order topological matter. The experimental effort so far is in the Dirac semimetal Cd_{3}As_{2}, where, however, time-reversal symmetry leads to hinge states on both sides of the top and bottom surfaces, instead of the aspired one-sided hinge states. We propose that under a tilted magnetic field, the hinge states in Cd_{3}As_{2}-like Dirac semimetals can be one sided, highly tunable by field direction and Fermi energy, and robust against weak disorder. Furthermore, we propose a scanning tunneling Hall measurement to detect the one-sided hinge states. Our results will be insightful for exploring not only the quantum Hall effects beyond two dimensions, but also other higher-order topological insulators in the future.

Flatness and boundness of photonic drumhead surface state in a metallic lattice

Nodal chain (NC) semi-metals have the degeneracy of interlacing rings in their band structure in momentum space. With the projection of degenerate rings towards crystal boundaries, there is a special type of surface dispersion appearing at surface Brillouin zone and termed drumhead surface state (DSS). Previously, experimental investigations on photonic NC and DSS have been done on metallic photonic crystals at microwave frequencies. However, far-field detection of DSS and its coupling to radiative modes in free space have not been studied. In the work, we analyze the photonic DSS in a metallic lattice by angle-resolved far-field reflection measurement and numerical simulation at terahertz (THz) frequencies, and reveal its flatness and boundness in band structure, even in the radiation continuum. Particularly, the DSS band can be tuned being from negatively dispersive via flat to positively dispersive by a single surface parameter, and the DSS at Γ point in surface Brillouin zone is in fact a symmetry-protected bound state in the continuum. Our results might have some potential applications towards THz photonics.

Evidence of Lifshitz Transition in the Thermoelectric Power of Ultrahigh-Mobility Bilayer Graphene

Resolving low-energy features in the density of states (DOS) holds the key to understanding a wide variety of rich novel phenomena in graphene-based 2D heterostructures. The Lifshitz transition in bilayer graphene (BLG) arising from trigonal warping has been established theoretically and experimentally. Nevertheless, the experimental realization of its effects on transport properties has been challenging because of its relatively low energy scale (∼1 meV). In this work, we demonstrate that the thermoelectric power (TEP) can be used as an effective probe to investigate fine changes in the DOS of BLG. We observed additional entropy features in the vicinity of the charge neutrality point (CNP) in gapped BLG. This apparent violation of the Mott formula can be explained quantitatively by considering the effects of trigonal warping, thereby serving as possible evidence of a Lifshitz transition.

Weyl Fermions in VI3 Monolayer

We report the presence of a Weyl fermion in VI₃ monolayer. The material shows a sandwich-like hexagonal structure and stable phonon spectrum. It has a half-metal band structure, where only the bands in one spin channel cross the Fermi level. There are three pairs of Weyl points slightly below the Fermi level in spin-up channel. The Weyl points show a clean band structure and are characterized by clear Fermi arcs edge state. The effects of spin-orbit coupling, electron correlation, and lattice strain on the electronic band structure were investigated. We find that the half-metallicity and Weyl points are robust against these perturbations. Our work suggests VI₃ monolayer is an excellent Weyl half-metal.