Promoting nickel oxidation state transitions in single-layer NiFeB hydroxide nanosheets for efficient oxygen evolution

Efficient photocatalytic overall water vapor splitting over amorphous Ni(OH)2/Ni2B heterojunctions

Developing efficient photocatalysts for solar-driven overall water vapor splitting is crucial for sustainable hydrogen production. However, current photocatalytic efficiencies are limited by inadequate hygroscopicity, sluggish proton transport, and rapid recombination of photogenerated electron-hole pairs. Here, we report the successful synthesis of an amorphous Ni(OH)2/Ni2B heterojunction material with a core-shell structure by regulating the reducing environment during the formation of nickel boride. This material exhibits highly efficient overall water vapor splitting performance without any cocatalysts. Under simulated solar irradiation, the optimized sample achieves a hydrogen production rate of 976 μmol·g-1·h-1, with near-stoichiometric evolution of hydrogen and oxygen, an apparent quantum yield of 5.4 %, and a solar-to-hydrogen conversion efficiency of 3.8 %. The enhanced performance is attributed to the unique amorphous/amorphous heterojunction structure that promotes effective charge separation, the abundant surface hydroxyl groups that improve proton transport and hygroscopicity, and the formation of photo-induced frustrated Lewis pairs (FLPs). Our findings shed light on the critical role of amorphous structures and surface chemistry in boosting photocatalytic activity, paving the way for the rational design of advanced photocatalysts for overall water vapor splitting.

The regulation of multiple 3d orbits triggers the self-equilibrium effect of high-entropy oxide in seawater electrolysis

Seawater electrolysis is undoubtedly a more sustainable alternative to pure water electrolysis at present. However, it is hindered by the relatively slow kinetics of the oxygen evolution reaction and the detrimental effects of chloride ions in seawater that require resolution. In this study, we developed a straightforward synthesis method and successfully prepared FeNiCoMnCr high-entropy oxide (HEO). The strong coupling among multiple 3d orbitals of the transition metals allows for significant regulation of the catalyst's electronic structure, enabling oxidation and reduction processes at the active site to spontaneously approach an equilibrium state. Additionally, Lewis acid Cr6+ selectively adsorbs OH-, further enhancing both activity and stability of the catalyst in alkaline seawater. This research provides valuable insights into utilizing HEOs for seawater electrolysis and elucidates the roles of metals within HEOs.

Unlocking One-Step Two-Electron Oxygen Reduction via Metalloid Boron-Modified Zn3In2S6 for Efficient H2O2 Photosynthesis

The indirect two-step two-electron oxygen reduction reaction (2e- ORR) dominates photocatalytic H2O2 synthesis but suffers from sluggish kinetics, •O2 --induced catalyst degradation, and spatiotemporal carrier-intermediate mismatch. Herein, we pioneer a metal-metalloid dual-site strategy to unlock the direct one-step 2e- ORR pathway, demonstrated through boron-engineered Zn3In2S6 (B-ZnInS) photocatalyst with In-B dual-active sites. The In-B dual-site configuration creates a charge-balanced electron reservoir by charge complementation, which achieves moderate O2 adsorption via bidentate coordination and dual-channel electron transfer, preventing excessive O─O bond activation. Simultaneously, boron doping induces lattice polarization to establish a built-in electric field, quintupling photogenerated carrier lifetimes versus pristine ZnInS. These synergies redirect the O2 activation pathway from indirect to direct 2e- ORR process, delivering an exceptional H2O2 production rate of 3121 µmol g-1 h-1 in pure water under simulated AM 1.5G illumination (100 mW cm-2)-an 11-fold enhancement over ZnInS. The system achieves an unprecedented apparent quantum yield of 49.8% at 365 nm for H2O2 photosynthesis among inorganic semiconducting photocatalysts, and can continuously produce medical-grade H2O2 (3 wt%). This work provides insights for designing efficient H2O2 photocatalysts and beyond.

Rapid and In Situ Active Sites Regeneration for OER Activity Recovery and Greatly Prolonged Water-Splitting Performance

Inspired by the continuous regeneration of enzymes in living organisms that enables sustained long-term enzymatic reactions, we propose an active site regeneration strategy to rapidly and in situ recover the catalytic activity of oxygen evolution reaction (OER) for the electrode through switching anode solution, to substantially prolong the service life of the electrolytic cell. The OER activity of anodic NiFe(S)/NM catalyst synthesized by coating S-doped NiFe-LDH on nickel mesh (NM) exhibited excellent initial activity, then experienced gradual active site and activity losses due to the nanosheet detachment from NM after a long-term OER process. Attractively, such a damaged catalyst and its active sites can be effectively regenerated by an in situ redox reaction followed by electrochemical oxidation through switching the anode into the different solutions, resulting in the full recovery of the OER activity to its initial value. The recovered catalyst (R-NiFe(S)/NM) retains 90% of the initial activity and can be operated stably for over 80 h at 300 mA cm-2 even after four cycles of being damaged and recovered, and the established electrolyzer equipped with in situ recovered catalyst can be operated at the identical current density and almost the same cell voltage to that of the initial one.

Systematic Investigation of the Role of Molybdenum and Boron in NiCo-Based Alloys for the Oxygen Evolution Reaction

Quaternary NiCoMoB electrocatalysts exhibited significantly enhanced OER performance compared to their ternary NiCoMo and NiCoB counterparts. An optimal Mo/B ratio of 1 (NiCoMoyBy) demonstrated a superior OER activity, attributed to a balance between the electronic and structural contributions from Mo and B, maximizing the electrocatalytic site density and activity. NiCoMoyBy-SA, a nanoparticle version synthesized via a surfactant-assisted method, showed further improved performance. The OER activity was evaluated by comparing overpotentials at 10 mA/cm2, with NiCoMoxB1-x, NiCoMoyBy, and NiCoMoyBy-SA exhibiting 293, 284, and 270 mV, respectively. NiCoMoyBy-SA also demonstrated the lowest onset potential (1.45 V), reflecting a superior efficiency. Chronoamperometry in 1 M pre-electrolyzed KOH at 30 °C highlighted NiCoMoyBy-SA's stability, activating within hours at 10 mA/cm2 and stabilizing over 7 days. At 50 mA/cm2, the overpotential increased minimally (0.02 mV/h over 2 days), and even at 100 mA/cm2 for 10 days, the activity declined only slightly, affirming a high stability. These findings demonstrate NiCoMoB electrocatalysts as cost-effective, efficient OER electrocatalysts, advancing sustainable energy technologies.

Polyoxometalated metal-organic framework superstructure for stable water oxidation

Stable, nonprecious catalysts are vital for large-scale alkaline water electrolysis. Here, we report a grafted superstructure, MOF@POM, formed by self-assembling a metal-organic framework (MOF) with polyoxometalate (POM). In situ electrochemical transformation converts MOF into active metal (oxy)hydroxides to produce a catalyst with a low overpotential of 178 millivolts at 10 milliamperes per square centimeter in alkaline electrolyte. An anion exchange membrane water electrolyzer incorporating this catalyst achieves 3 amperes per square centimeter at 1.78 volts at 80°C and stable operation at 2 amperes per square centimeter for 5140 hours at room temperature. In situ electrochemical spectroscopy and theoretical studies reveal that the synergistic interactions between metal atoms create a fast electron-transfer channel from catalytic iron and cobalt sites, nickel, and tungsten in the polyoxometalate to the electrode, stabilizing the metal sites and preventing dissolution.

Superexchange interaction regulates Ni/Mn spin states triggering Ni-t2g/O-2p reductive coupling enabling stable lithium-rich cathode

Lithium-rich layer oxides are expected to be high-capacity cathodes for next-generation lithium-ion batteries, but their performance is hindered by irreversible anionic redox, leading to voltage decay, lag, and slow kinetics. In order to solve these problems, we regulate the Ni/Mn spin state in Li1.2Mn0.6Ni0.2O2 by Be doping, which generates the superexchange interaction and activates Ni-t2g orbitals. The activation of Ni-t2g orbitals triggers the reductive coupling mechanism between Ni/O, which improves the reversibility and kinetics of anionic redox. The strong π-type Ni-t2g/O-2p interaction forms a stable Ni-(O-O) configuration, suppressing excessive anion oxidation. In this work, the Be modified cathodes have good cycle stability, 0.04 mAh/g and 0.5 mV decay per cycle over 400 cycles at 1 C (60 min, 250 mA g-1), with a rate performance of 187 mAh/g at 10 C (6 min, 2500 mA g-1), providing a strategy for stabilising oxygen redox chemistry and designing high performance lithium-rich cathodes.

Selective Electrocatalytic Production of Formic Acid from Plastic Waste Using a Nickel Metal-Organic Framework Constructed from a Biomass-Derived Ligand

A novel nickel-based metal organic framework (MOF) [Ni(FDC)(CH3OH)1.5(H2O)0.5](H2O)0.35 (UOW-6) utilizing biomass-derived 2,5-furan dicarboxylate (FDC) as a ligand is reported as an electrocatalyst for anodic ethylene glycol (EG) oxidation with cathodic hydrogen evolution. The MOF structure was analyzed using single crystal X-ray-diffraction, thermogravimetric analysis (TGA) and thermodiffractometry, to establish its structure and verify phase purity. The material was dropcast on carbon fiber paper as a catalyst, and by using a three-electrode system, UOW-6 requires only 1.47 V to attain a current density of 50 mA cm-2. During oxidation of the EG, UOW-6 shows unprecedented selectivity towards formic acid with a Faradaic efficiency of 94 % and remarkable stability over 20 days. The combination of electrochemical measurements and in situ Raman confirmed in situ formed NiOOH at the surface of UOW-6 as the catalytically active sites for EG oxidation. This work not only presents a pioneering application of FDC-based MOFs for polyethylene terephthalate (PET) upcycling but also underscores the potential of electrocatalysis in advancing sustainable plastic valorization strategies.

Water Dissociation on NiOOH in Alkaline Water Electrolysis Improves with Increasing Alkali Metal Cation Size

The activity of nickel-based electrocatalysts toward the oxygen evolution reaction (OER) is influenced by the presence of alkali metal cations in the electrolyte. Since the underlying mechanism is not fully resolved yet, a study combining Raman, Fourier-transform infrared, and photoelectron spectroscopies is conducted. It is found that an improved OER activity correlates with structural changes of the catalyst. The cations are adsorbed in increasing amounts in the order Li+ < Na+ < K+ < Cs+, opening the layers of the NiOOH layered double-hydroxide structure and promoting a transition from a more β-like to a more γ-like NiOOH phase. In addition, the NiOOH surface gets increasingly deprotonated with increasing alkali cation size. The activated catalyst materials are stabilized in ultra-high vacuum and exposed to controlled doses of H2O to analyze the catalyst-electrolyte interface in a quasi in situ approach with photoelectron spectroscopy. Going from Li+ to Cs+, more OH groups are found on the surface after the exposure to H2O, demonstrating that such structural changes are facilitating the dissociation of H2O. As the dissociation of H2O is a crucial step in many OER mechanisms, its modified efficiency can be correlated with the observed trends in OER activity in LiOH, NaOH, KOH, and CsOH.

Phosphorus-Modified High-Entropy Layered Double Hydroxide for Enhanced Electrocatalytic Oxygen Evolution via d-Band Center Modulation

Developing cost-effective, high-performance electrocatalysts for the oxygen evolution reaction (OER) is crucial but challenging. High-entropy layered double hydroxides (HE-LDHs) show promise due to their multimetal synergy and structural complexity, yet their OER performance is limited by electronic and surface properties. This study combines theoretical and experimental methods to enhance OER by incorporating phosphorus (P) atoms in HE-LDHs, optimizing oxygen intermediate adsorption, and boosting OER activity and stability. A P-modified FeNiCoCuZn LDH catalyst (P-FeNiCoCuZn LDH) is synthesized via hydrothermal and low-temperature phosphatization processes, featuring phosphate anion intercalation and surface metal phosphides. The phosphate anions improve conductivity and stability, while surface P atoms adjust the electronic structure of metal sites, particularly Ni and Fe, reducing the energy barrier for the rate-determining step (*O → *OOH). The P-FeNiCoCuZn LDH achieves a low overpotential of 290 mV at 100 mA cm-2 and maintains stability for 100 h in 1 M KOH. In situ Raman spectroscopy shows the formation of highly active Ni(Fe)OOH species during OER. This work offers a novel strategy for designing efficient water-splitting catalysts through in situ heteroatom modification, advancing high-entropy materials in electrocatalysis.

A Review of Surface Reconstruction and Transformation of 3d Transition-Metal (oxy)Hydroxides and Spinel-Type Oxides during the Oxygen Evolution Reaction

Developing efficient and sustainable electrocatalysts for the oxygen evolution reaction (OER) is crucial for advancing energy conversion and storage technologies. 3d transition-metal (oxy)hydroxides and spinel-type oxides have emerged as promising candidates due to their structural flexibility, oxygen redox activity, and abundance in earth's crust. However, their OER performance can be changed dynamically during the reaction due to surface reconstruction and transformation. Essentially, multiple elementary processes occur simultaneously, whereby the electrocatalyst surfaces undergo substantial changes during OER. A better understanding of these elementary processes and how they affect the electrocatalytic performance is essential for the OER electrocatalyst design. This review aims to critically assess these processes, including oxidation, surface amorphization, transformation, cation dissolution, redeposition, and facet and electrolyte effects on the OER performance. The review begins with an overview of the electrocatalysts' structure, redox couples, and common issues associated with electrochemical measurements of 3d transition-metal (oxy)hydroxides and spinels, followed by recent advancements in understanding the elementary processes involved in OER. The challenges and new perspectives are presented at last, potentially shedding light on advancing the rational design of next-generation OER electrocatalysts for sustainable energy conversion and storage applications.

A photovoltaic-electrolysis system with high solar-to-hydrogen efficiency under practical current densities

The photovoltaic-alkaline water (PV-AW) electrolysis system offers an appealing approach for large-scale green hydrogen generation. However, current PV-AW systems suffer from low solar-to-hydrogen (STH) conversion efficiencies (e.g., <20%) at practical current densities (e.g., >100 mA cm-2), rendering the produced H2 not economical. Here, we designed and developed a highly efficient PV-AW system that mainly consists of a customized, state-of-the-art AW electrolyzer and concentrator photovoltaic (CPV) receiver. The highly efficient anodic oxygen evolving catalyst, consisting of an iron oxide/nickel (oxy)hydroxide (Fe2O3-NiOxHy) composite, enables the customized AW electrolyzer with unprecedented catalytic performance (e.g., 1 A cm-2 at 1.8 V and 0.37 kgH2/m-2 hour-1 at 48 kWh/kgH2). Benefiting from the superior water electrolysis performance, the integrated CPV-AW electrolyzer system reaches a very high STH efficiency of up to 29.1% (refer to 30.3% if the lead resistance losses are excluded) at large current densities, surpassing all previously reported PV-electrolysis systems.

Time-resolved spectroscopy uncovers deprotonation-induced reconstruction in oxygen-evolution NiFe-based (oxy)hydroxides

Transition-metal layered double hydroxides are widely utilized as electrocatalysts for the oxygen evolution reaction (OER), undergoing dynamic transformation into active oxyhydroxides during electrochemical operation. Nonetheless, our understanding of the non-equilibrium structural changes that occur during this process remains limited. In this study, utilizing in situ energy-dispersive X-ray absorption spectroscopy and machine learning analysis, we reveal the occurrence of deprotonation and elucidate the role of incorporated iron in facilitating the transition from nickel-iron layered double hydroxide (NiFe LDH) into its active oxyhydroxide. Our findings demonstrate that iron substitution promotes deprotonation process within NiFe LDH, resulting in the preferential removal of protons from the specific bridged hydroxyl group (Ni2+-OH-Fe3+) linked to edge-sharing [NiO6] and [FeO6] octahedron. This deprotonation behavior drives the formation of high-valence Ni3+δ species (0 <δ < 1), which subsequently serve as the active sites, thereby ensuring efficient oxygen evolution activity. This approach offers high-resolution insights of dynamic structural evolution, overcoming the limitations of extended acquisition times and advancing our understanding of OER mechanisms.

Achieving Excess Hydrogen Output via Concurrent Electrochemical and Chemical Redox Reactions on P-Doped Co-Based Catalysts with Electron Manipulation and Kinetic Regulation

Electrolytic hydrogen production is of great significance in energy conversion and sustainable development. Traditional electrolytic water splitting confronts high anode voltage with oxygen generation and the amount of hydrogen produced at cathode depends entirely on the quantity of electric charge input. Herein, excess hydrogen output can be achieved by constructing a spontaneous hydrazine oxidation reaction (HzOR) coupled hydrogen evolution reaction (HER) system. For the hydrazine oxidation-assisted electrolyzer in this work, both the external input electrons and the electrons produced by spontaneous chemical redox reaction can reduce water, producing more hydrogen than traditional electrolytic water splitting system. The ultrafast kinetics of bifunctional P-doped Co-based catalysts plays a key role in the spontaneous feature of HzOR/HER redox reaction and low working voltage of hydrazine oxidation-assisted electrolyzer (12 mV@100 mA cm-2). Theoretical calculation results and ex situ/in situ spectra demonstrate that doped P could optimize electronic structure, regulate adsorption energy of intermediates, and thus endows catalysts with ultrafast kinetics. This work provides a new pathway for the development of spontaneous oxidation-assisted hydrogen production, to achieve excess hydrogen output via concurrent electrochemical and chemical redox reactions.

Molecular Probing Coupled with Density Functional Theory Calculation to Reveal the Influence of Fe Doping on Fe-NiOOH Electrode for High Current Density of Water Splitting

Fe-doped NiOOH electrocatalysts have attracted wide interest for the exceptional oxygen evolution reaction (OER) performance, but the precise role of Fe doping on the improved intrinsic activity remains unclear. Herein, the molecular probe technique combined with density functional theory calculation is used to reveal the influence of the Fe atom on the rate-determining step of the OER reaction, where the pre-catalyst of hierarchical self-supporting NiFe layered double hydroxide [LDH] nanosheets equipped on nickel foam (NiFe LDH/NF) is generated via a facile and industrially well-matched one-pot corrosion method. The physical characterization results reveal the reconstruction of NiFe LDH into Fe-doped NiOOH for promoted OER, which has a lower OH* adsorption energy with fast subsequent steps that help in obtaining an improved charge injection efficiency compared to NiOOH. In addition, more exposed electroactive species and facile delivery of mass/electron inside the catalytic procedure actually have a high-quality contribution to the outstanding catalytic activity. Therefore, the NiFe LDH36/NF electrocatalyst provides high catalytic activities of 241 and 320 mV at 10 mA cm-2 toward the OER and overall water-splitting in 1 m KOH. This work provides a promising avenue for the rational design of durable self-supporting electrodes toward large-scale water splitting.

Magnesium-promoted rapid self-reconstruction of NiFe-based electrocatalysts toward efficient oxygen evolution

The acceleration of active sites formation through surface reconstruction is widely acknowledged as the crucial factor in developing high-performance oxygen evolution reaction (OER) catalysts for water splitting. Herein, a simple one-step corrosion method and magnesium (Mg)-promoted strategy are reported to develop the NiFe-based catalyst with enhanced OER performance. The Mg is introduced in NiFe materials to preparate a "pre-catalyst" Mg-Ni/Fe2O3. In-situ Raman shows that Mg doping would accelerate the self-reconstruction of Ni/Fe2O3 to form active NiOOH species during OER. In-situ infrared indicates that Mg doping benefits the formation of *OOH intermediate. Theoretical analysis further confirms that Mg doping can optimize the adsorption of oxygen intermediates, accelerating the OER kinetics. Accordingly, the Mg-Ni/Fe2O3 catalyst exhibits excellent OER performance with overpotential of 168 mV at 10 mA cm-2. The anion exchange membrane water electrolyzer achieved 200 mA cm-2 at voltage of 1.53 V, showing excellent stability over 500 h as well. This work demonstrates the potential of Mg-promoted strategy in regulating the activity of transition metal-based OER electrocatalysts.

Reversible Configurations of 3-Coordinate and 4-Coordinate Boron Stabilize Ultrahigh-Ni Cathodes with Superior Cycling Stability for Practical Li-Ion Batteries

Ultrahigh-Ni layered oxide cathodes are the leading candidate for next-generation high-energy Li-ion batteries owing to their cost-effectiveness and ultrahigh capacity. However, the increased Ni content causes larger volume variations and worse lattice oxygen stability during cycling, resulting in capacity attenuation and kinetics hysteresis. Herein, a Li2SiO3-coated Li(Ni0.95Co0.04Mn0.01)0.99B0.01O2 ultrahigh-Ni cathode that well-addresses all the above issues, which is also the first time to realize the real doping of B ions is demonstrated. The as-obtained cathode delivers a reversible capacity of up to 237.4 mAh g-1 (924 Wh kg-1 cathode) and a superior capacity retention of 84.2% after 500 cycles at 1C in pouch-type full-cells. Advanced characterizations and calculations verify that the boron-doping is existed in terms of 3-coordinate and 4-coordinate configurations and their high electrochemical reversibility during de-/lithiation, which greatly stabilizes oxygen anions and impedes Ni-ion migration to Li layer. Furthermore, the B-doping engineers the primary particle microstructure for better relaxing the lattice strain and accelerating Li-ion diffusion. This work advances the energy density of cathode materials into the domain of above 900 Wh kg-1, and the concept will inspire more intensive study on ultrahigh-Ni cathodes.

Tailoring Ni-Fe-B Electronic Effects in Layered Double Hydroxides for Enhanced Oxygen Evolution Activity

NiFe layered double hydroxides (LDHs) are state-of-the-art catalysts for the oxygen evolution reaction (OER) in alkaline media, yet they still face significant overpotentials. Here, quantitative boron (B) doping is introduced in NiFe LDHs (ranging from 0% to 20.3%) to effectively tailor the Ni-Fe-B electronic interactions for enhanced OER performance. The co-hydrolysis synthesis approach synchronizes the hydrolysis rates of Ni and Fe precursors with the formation rate of B─O─M (M: Ni, Fe) bonds, ensuring precise B doping into the NiFe LDHs. It is demonstrated that B, as an electron-deficient element, acts as an "electron sink" at doping levels from 0% to 13.5%, facilitating the transition of Ni2+ to the active Ni3+δ, thereby accelerating OER kinetics. However, excessive B doping (13.5-20.3%) effectively generates oxygen vacancies in the LDHs, which increases electron density at Ni2+ sites and hinders their transition to Ni3+δ, thereby reducing OER activity. Optimal OER performance is achieved at a B doping level of 13.5%, with an overpotential of only 208 mV to reach a current density of 500 mA cm-2, placing it among the most effective OER catalysts to date. This Ni-Fe-B electronic engineering opens new avenues for developing highly efficient anode catalysts for water-splitting hydrogen production.

Sabatier Principle Driving Interface Defect Engineering on 3D Graphene-Like Encapsulated Cobalt Structure for Hydrogenation Reaction

Establishing structural defects is a perspective way to increase the catalytic hydrogenation reaction. Toward Sabatier optimization for hydrogenation reaction with defect density offers guidance for designing optimal catalysts with the highest performance. A controllable synthesis strategy is reported for Co@NC-x catalyst induced by defect density. A series of N-doped carbon-based defective Co@NC-x catalysts with different defect densities ranging from 1.5 × 1011 to 1.9 × 1011 cm-2 via high-temperature sublimation strategy is obtained. The results show that the volcano curves are observed between defect density and catalytic hydrogenation performance with a summit at a moderate defect density of 1.7 × 1011 cm-2, matched well with Sabatier phenomenon. Remarkably, the defect density on the graphene-like shell serves as descriptor to the adsorbate state and consequently the catalytic activity. However, to the best of knowledge, the Sabatier phenomenon in hydrogenation reactions at the defect scale in 3D graphene-like encapsulated metal (3D-GEM) catalysts has not been reported. This work highlights the meaning of defect-density effect on catalytic hydrogenation reaction, supplying meaningful guidance for the rational design of more efficient and durable defective 3D-GEM catalyst.

Improving the Electrocatalytic Activity of a Core/Shell NiCo-ZIF@PBA Catalyst by Co-O-Fe Bridge Bonds for Water Oxidation

In response to the limitations of slow reaction kinetics and elevated overpotentials in the OER, a novel core-shell structured electrocatalyst, termed NiCo-ZIF-67@Fe-Co-Ni-PBA or NiCo-ZIF@PBA, has been developed. This material demonstrates exceptional catalytic performance, exhibiting a minimal overpotential of approximately 188 mV at 10 mA cm-2, alongside a Tafel slope of 109 mV dec-1. Its robust stability in a 1 M KOH solution during the OER operations is noteworthy. Theoretical insights from DFT calculations reveal that a Co-O-Fe bridging configuration within NiCo-ZIF@PBA lowers the energy barrier for the reaction to 1.79 eV, a significant reduction from 2.67 eV observed with NiCo-ZIF-67. The improvement in electrochemical performance is primarily due to the emergence of Co3+ ions, which results from the efficient charge transfer occurring at the interface of the PBA and NiCo-ZIF core-shell structure. These findings suggest a promising strategy for designing advanced core-shell materials for electrocatalytic applications.

Manipulating the d- and p-Band centers of amorphous alloys by variable composition for robust oxygen evolution reaction

Amorphous electrocatalysts display several unique advantages in electricity-driven water splitting compared to their crystalline analogs, but understanding their structure-activity relationships remains a major challenge. Herein, we show that the d- and p-electronic states of amorphous Ni-Fe-B can be subtly manipulated by varying the Ni and Fe contents. The optimal Ni-Fe-B alloy exhibits a high performance in the oxygen evolution reaction (OER), as supported by its impressive stability (no clear degradation after 100 h) and considerably lower overpotential compared to those of its crystalline analogs. Based on theoretical calculations, different Ni and Fe contents can cause significant shifts in the d-band levels of Ni and Fe and the p-band level of B, thus altering the OER activity. Additionally, the energy difference between the d- and p-band centers (ΔEad-p) may be an effective index for use in reflecting the structure-activity relationship of an amorphous Ni-Fe-B alloy in the OER. An amorphous Ni-Fe-B alloy with a smaller ΔEad-p displays a higher intrinsic activity. This study supplies a unique direction for use in constructing the structure-activity relationships of amorphous electrocatalysts by revealing the role of ΔEad-p, which promotes fundamental research and the practical application of amorphous electrocatalysts.

Nb Doping Induced the Formation of Protective Layer to Improve the Stability of Fe-Ni3S2 for Seawater Electrolysis

The seawater electrolysis to produce hydrogen is a significant topic on alleviating the energy crisis. Here, the Fe, Nb-Ni3S2 catalyst is prepared by metal-doping strategy, and it shows high oxygen evolution reaction (OER) activity in alkaline medium, and only needs 1.491 V to deliver a current density of 100 mA cm-2 in simulated seawater. Using Fe, Nb-Ni3S2 as a bifunctional catalyst, the two-electrode electrolyzer only requires a voltage of 1.751 V (without impedance compensation) to drive the current density of 50 mA cm-2, and can run over 150 h stably in the simulated seawater. Importantly, In situ Raman test demonstrates that the outstanding performance of Fe, Nb-Ni3S2 in simulated seawater is ascribed to the in situ formed sulfate protective layer induced by Nb doping, which can effectively inhibit the corrosion of chloride ion, while the protective layer is absent for Fe-Ni3S2. The stable operation of simulated seawater electrolysis under industrial current density further confirms the stability improvement mechanism of forming protective layer. In short, this study provides a new strategy of using Nb dopants inducing the formation of protective layer to enhance the stability of seawater electrolysis.

Hollow Structure Derived Phosphide Nanosheets for Water Oxidation

Avoiding the stacking of active sites in catalyst structural design is a promising route for realizing active oxygen evolution reaction (OER). Herein, using a CoFe Prussian blue analoge cube with hollow structure (C-CoFe PBA) as a derived support, a highly effective Ni2P-FeP4-Co2P catalyst with a larger specific surface area is reported. Benefiting from the abundant active sites and fast charge transfer capability of the phosphide nanosheets, the Ni2P-FeP4-Co2P catalyst in 1 m KOH requires only overpotentials of 248 and 277 mV to reach current density of 10 and 50 mA cm-2 and outperforms the commercial catalyst RuO2 and most reported non-noble metal OER catalysts. In addition, the two-electrode system consisting of Ni2P-FeP4-Co2P and Pt/C is able to achieve a current density of 10 and 50 mA cm-2 at 1.529 and 1.65 V. This work provides more ideas and directions for synthesizing transition metal catalysts for efficient OER performance.

Advances in Stability of NiFe-Based Anodes toward Oxygen Evolution Reaction for Alkaline Water Electrolysis

Alkaline electrolysis plays a crucial role in sustainable energy solutions by utilizing electrolytic cells to produce hydrogen gas, providing a clean and efficient method for energy storage and conversion. Efficient, stable, and low-cost electrocatalysts for the oxygen evolution reaction (OER) are essential to facilitate alkaline water electrolysis on a commercial scale. Nickel-iron-based (NiFe-based) transition metal electrocatalysts are considered the most promising non-precious metal catalysts for alkaline OER due to their low cost, abundance, and tunable catalytic properties. Nevertheless, the majority of existing NiFe-based catalysts suffer from limited activity and poor stability, posing a significant challenge in meeting industrial applications. This also highlights a common situation where the emphasis on material activity receives significant attention, while the equally critical stability aspect is often underemphasized. Initiating with a comprehensive exploration of the stability of NiFe-based OER materials, this article first summarizes the debate surrounding the determination of active sites in NiFe-based OER electrocatalysts. Subsequently, the degradation mechanisms of recently reported NiFe-based electrocatalysts are outlined, encompassing assessments of both chemical and mechanical endurance, along with essential approaches for enhancing their stability. Finally, suggestions are put forth regarding the essential considerations for the design of NiFe-based OER electrocatalysts, with a focus on heightened stability.

Asymmetric electron occupation of transition metals for the oxygen evolution reaction via a ligand-metal synergistic strategy

The performance of two-dimensional transition-metal (oxy)hydroxides (TMOOHs) for the electrocatalytic oxygen evolution reaction (OER), as well as their large-scale practical applications, are severely limited by the sluggish kinetics of the four-electron OER process. Herein, using a symmetry-breaking strategy, we simulated a complex catalyst composed of a single Co atom and a 1,10-phenanthroline (phen) ligand on CoOOH through density functional theory studies, which exhibits excellent OER performance. The active site Co undergoes a valence oscillation between +2, +3 and even high valence +4 oxidation states during the catalytic process, resulting from the distorted coordination effect after the ligand modification. The induced asymmetry in the electronic states of surrounding nitrogen and oxygen atoms modulates the eg occupation of Co-3d orbitals, which should be of benefit to reduce the overpotential in the OER process. By studying similar catalytic systems, the prominent role of ligands in creating asymmetric electronic structures and in modulating the valence of the active site and the OER performance was reconfirmed. This study provides a new dimension for optimizing the electrocatalytic performance of various TM-ligand complexes.

Activating and Stabilizing Lattice Oxygen via Self-Adaptive Zn-NiOOH Sub-Nanowires for Oxygen Evolution Reaction

Efficient and durable catalysts for the oxygen evolution reaction are essential for realizing the large-scale application of water electrolysis technologies. Here, we report a novel Zn-doped NiOOH subnanowires (Zn-NiOOH SNWs) catalyst synthesized via the electrochemical reconstruction of Zn-NiMoO4 SNWs. The inclusion of Zn triggers a transition in the oxygen evolution reaction mechanism of NiOOH from the adsorbate evolution mechanism to the lattice oxygen mechanism, resulted from Zn's adaptive adjustment of coordination types, which also improves the reaction energetics, thereby enhancing the stability and activity. Furthermore, the subnanowire structure provides further stabilization of the lattice oxygen in Zn-NiOOH, preventing its destructive dissolution. Remarkably, Zn-NiOOH SNWs display a current density of 10 mA cm-2 with an overpotential of only 179 mV and maintain stable operation at 200 mA cm-2 for 800 h with minimal changes in overpotential, establishing them as one of the most effective catalysts involving lattice oxygen for the alkaline oxygen evolution reaction. When utilized as the anode in an alkaline water electrolyzer, our Zn-NiOOH SNWs catalyst demonstrates stability exceeding 500 h under a water-splitting current of 200 mA cm-2, indicating promising potential for practical applications.

Atomic Manipulation to Create High-Valent Fe4+ for Efficient and Ultrastable Oxygen Evolution at Industrial-Level Current Density

Manipulating the electronic structure of a catalyst at the atomic level is an effective but challenging way to improve the catalytic performance. Here, by stretching the Fe-O bond in FeOOH with an inserted Mo atom, a Fe-O-Mo unit can be created, which will induce the formation of high-valent Fe4+ during the alkaline oxygen evolution reaction (OER). The highly active Fe4+ state has been clearly revealed by in situ X-ray absorption spectroscopy, which can both enhance the oxidation capability and lead to an efficient and stable adsorbate evolution mechanism (AEM) pathway for the OER. As a result, the obtained Fe-Mo-Ni3S2 catalyst exhibits both superior OER activity and outstanding stability, which can achieve an industrial-level current density of 1 A cm-2 at a low overpotential of 259 mV (at 60 °C) and can stably work at the large current for more than 2000 h. Moreover, by coupling with commercial Pt/C, the Fe-Mo-Ni3S2∥Pt/C system can be used in the anion exchange membrane cell to acquire 1 A cm-2 for overall water splitting at 1.68 V (2.03 V for 4 A cm-2), outperforming the benchmark RuO2∥Pt/C system. The efficient, low-cost, and ultrastable OER catalyst enabled by manipulating the atomic structure may provide potential opportunities for future practical water splitting.

Iron, Tungsten Dual-Doped Nickel Sulfide as Efficient Bifunctional Catalyst for Overall Water Splitting

Developing low-cost and highly efficient bifunctional catalysts for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) is a challenging problem in electrochemical overall water splitting. Here, iron, tungsten dual-doped nickel sulfide catalyst (Fe/W-Ni3S2) is synthesized on the nickel foam, and it exhibits excellent OER and HER performance. As a result, the water electrolyze based on Fe/W-Ni3S2 bifunctional catalyst illustrates 10 mA cm-2 at 1.69 V (without iR-compensation) and highly durable overall water splitting over 100 h tested under 500 mA cm-2. Experimental results and DFT calculations indicate that the synergistic interaction between Fe doping and Ni vacancy induced by W leaching during the in situ oxidation process can maximize exposed OER active sites on the reconstructed NiOOH species for accelerating OER kinetics, while the Fe/W dual-doping optimizes the electronic structure of Fe/W-Ni3S2 and the binding strength of intermediates for boosting HER. This study unlocks the different promoting mechanisms of incorporating Fe and W for boosting the OER and HER activity of Ni3S2 for water splitting, which provides significant guidance for designing high-performance bifunctional catalysts for overall water splitting.

WO3-x as an activation medium to prompt overall water splitting of NiFe-based electrocatalyst

The efficient oxygen evolution reaction (OER) is crucial for various electrochemical processes, especially for overall water splitting (OWS). In this study, we focus on the utilization of WO3-x as an activation medium to enhance the OER performance of NiFe-based electrocatalysts. Firstly, we synthesize WO3-x nanowires supported on nickel foam (NF) and then incorporate NiFe on WO3-x nanowires by a simple hydrothermal method. The WO3-x self-supported NiFe (Oxy)hydroxide (denoted as NiFe-W-O/NF) shows a three-dimensional stereostructure composed of ultrathin nanosheets (∼ 4.0 nm). This unique structure provides a large open surface for fuller diffusion of the electrolyte while exposing more active sites. The electronic interaction of tri-centers of NiFeW accelerates the surface reconstruction process of γ-NiOOH and FeOOH, which are converted into the main active species in a short time. The electrochemical measurements confirm that the NiFe-W-O/NF has low OER overpotentials (233 mV at 10 mA cm-2, 298 mV at 100 mA cm-2) and excellent stability (100 h in total) in 1 M KOH electrolyte. In addition, the NiFe-W-O/NF || NiFe-W-O/NF battery also exhibits a low cell voltage (1.52 V at 10 mA cm-2) with a stable lifetime (50 h) under alkaline conditions. These results highlight the great potential of NiFe-W-O/NF for practical applications.

Electrocatalytic Glycerol Upgrading into Glyceric Acid on Ni3Sn Intermetallic Compound

Electrochemical glycerol oxidation features an attractive approach of converting bulk chemicals into high-value products such as glyceric acid. Nonetheless, to date, the major product selectivity has mostly been limited as low-value C1 products such as formate, CO, and CO2, due to the fast cleavage of carbon-carbon (C-C) bonds during electro-oxidation. Herein, the study develops an atomically ordered Ni3Sn intermetallic compound catalyst, in which Sn atoms with low carbon-binding and high oxygen-binding capability allow to tune the adsorption of glycerol oxidation intermediates from multi-valent carbon binding to mono-valent carbon binding, as well as enhance *OH binding and subsequent nucleophilic attack. The Ni3Sn electrocatalyst exhibits one of the highest glycerol-to-glyceric acid performances, including a high glycerol conversion rate (1199 µmol h-1) and glyceric acid selectivity (62 ± 3%), a long electrochemical stability of > 150 h, and the capability of direct conversion of crude glycerol (85% purity) into glyceric acid. The work features the rational design of highly ordered catalytic sites for tailoring intermediate binding and reaction pathways, thereby facilitating the efficient production of high-value chemical products.

Controllable synthesis of a hybrid mesoporous sheets-like Fe0.5NiS2@ P, N-doped carbon electrocatalyst for alkaline oxygen evolution reaction

Owing to the high cost of precious metal catalysts for the oxygen evolution reaction (OER), the production of highly efficient and affordable electrocatalysts is important for generating pollution-free and renewable energy via electrochemical processes. A facile hydrothermal approach was employed to synthesize hybrid mesoporous iron-nickel bimetallic sulfides @ P, N-doped carbon for the OER. The prepared Fe0.5NiS2@C exhibited an overpotential (η) of 250 mV at 10 mA/cm2. This exceeded the overpotentials recently reported for surface-modified P, N-doped carbon-based catalysts for the OER in a 1 M KOH medium. Moreover, the Fe0.5NiS2@C catalyst showed a notable Tafel slope of 90.5 mV/dec with long-dated stability even after 24 h at 10 mA/cm2. The superior OER performance of the Fe0.5NiS2@C catalysts may be due to their large surface area, sheet-like morphology with abundant active sites, fast transfer of mass and electrons, control of the electronic structure by co-treatment with heteroatoms (e.g., P and N), and the synergistic effect of bimetallic sulfides, making them favorable catalysts for the oxygen evolution reaction. Density functional theory (DFT) calculations showed that the Fe0.5NiS2@C catalyst exhibited strong H2O-adsorption energy. The enhanced OER activity of Fe0.5NiS2@C was attributed to its higher surface area, favorable H2O adsorption energy, improved electron transfer efficiency, and lower Gibbs free energy compared to those of the other proposed catalysts.

Boosting electrochemical oxygen reduction to hydrogen peroxide coupled with organic oxidation

The electrochemical oxygen reduction reaction (ORR) to produce hydrogen peroxide (H2O2) is appealing due to its sustainability. However, its efficiency is compromised by the competing 4e- ORR pathway. In this work, we report a hierarchical carbon nanosheet array electrode with a single-atom Ni catalyst synthesized using organic molecule-intercalated layered double hydroxides as precursors. The electrode exhibits excellent 2e- ORR performance under alkaline conditions and achieves H2O2 yield rates of 0.73 mol gcat-1 h-1 in the H-cell and 5.48 mol gcat-1 h-1 in the flow cell, outperforming most reported catalysts. The experimental results show that the Ni atoms selectively adsorb O2, while carbon nanosheets generate reactive hydrogen species, synergistically enhancing H2O2 production. Furthermore, a coupling reaction system integrating the 2e- ORR with ethylene glycol oxidation significantly enhances H2O2 yield rate to 7.30 mol gcat-1 h-1 while producing valuable glycolic acid. Moreover, we convert alkaline electrolyte containing H2O2 directly into the downstream product sodium perborate to reduce the separation cost further. Techno-economic analysis validates the economic viability of this system.

Seawater electrolysis for fuels and chemicals production: fundamentals, achievements, and perspectives

Seawater electrolysis for the production of fuels and chemicals involved in onshore and offshore plants powered by renewable energies offers a promising avenue and unique advantages for energy and environmental sustainability. Nevertheless, seawater electrolysis presents long-term challenges and issues, such as complex composition, potential side reactions, deposition of and poisoning by microorganisms and metal ions, as well as corrosion, thus hindering the rapid development of seawater electrolysis technology. This review focuses on the production of value-added fuels (hydrogen and beyond) and fine chemicals through seawater electrolysis, as a promising step towards sustainable energy development and carbon neutrality. The principle of seawater electrolysis and related challenges are first introduced, and the redox reaction mechanisms of fuels and chemicals are summarized. Strategies for operating anodes and cathodes including the development and application of chloride- and impurity-resistant electrocatalysts/membranes are reviewed. We comprehensively summarize the production of fuels and chemicals (hydrogen, carbon monoxide, sulfur, ammonia, etc.) at the cathode and anode via seawater electrolysis, and propose other potential strategies for co-producing fine chemicals, even sophisticated and electronic chemicals. Seawater electrolysis can drive the oxidation and upgrading of industrial pollutants or natural organics into value-added chemicals or degrade them into harmless substances, which would be meaningful for environmental protection. Finally, the perspective and prospects are outlined to address the challenges and expand the application of seawater electrolysis.

Interface engineering of three-phase nickel-cobalt sulfide/nickel phosphide/iron phosphide heterostructure for enhanced water splitting and urea electrolysis

Rational designing efficient transition metal-based multifunctional electrocatalysts is highly desirable for improving the efficiency of hydrogen production from water cracking. Herein, a self-supported three-phase heterostructure electrocatalyst of nickel-cobalt sulfide/nickel phosphide/iron phosphide (CoNi5S8-Ni2P-FeP2) was prepared by a two-step gas-phase sulfurization/phosphorization strategy. The heterostructure in CoNi5S8-Ni2P-FeP2 provides a favorable interfacial environment for electron transfer and synergistic interaction of multiphase active components, while the introduced electronegative P/S not only serves as a carrier for proton capture in the hydrogen evolution reaction (HER) process but also promotes the metal-electron outflow, which in turn accelerates the generation of high-valent Ni3+ species to enhance the catalytic activity of oxygen evolution reaction (OER) and urea oxidation reaction (UOR). As expected, CoNi5S8-Ni2P-FeP2 reveals excellent multifunctional electrocatalytic properties. An overpotential of 35/215 mV is required to reach 10 mA cm-2 for HER/OER. More encouragingly, a current of 100 mA cm-2 requires only 1.36 V for UOR with CoNi5S8-Ni2P-FeP2 as anode, which is much lower as compared to the OER (1.50 V). Besides, a two-electrode water/urea electrolyzer assembled based on CoNi5S8-Ni2P-FeP2 has a voltage of only 1.59/1.48 V when the system reaches 50 mA cm-2. This work provides a new idea for the design of energy-efficient water/urea-assisted water-splitting multifunctional catalysts with multi-component heterostructure synergistic interface engineering.

Glassy State Hydroxide Materials for Oxygen Evolution Electrocatalysis

Hydroxides are the archetype of layered crystals with metal-oxygen (M-O) octahedron units, which have been widely investigated as oxygen evolution reaction (OER) catalysts. However, the better crystallinity of hydroxide materials, the more perfect octahedral symmetry and atomic ordering, resulting in the less exposed metal sites and limited electrocatalytic activity. Herein, a glassy state hydroxide material featuring with short-range order and long-range disorder structure is developed to achieve high intrinsic activity for OER. Specifically, a rapid freezing point precipitation method is utilized to fabricate amorphous multi-component hydroxide. Owing to the freezing-point crystallization environment and chaotic M-O (M = Ni/Fe/Co/Mn/Cr etc.) structures, the as-fabricated NiFeCoMnCr hydroxide exhibit a highly-disordered glassy structure, as-confirmed by X-ray/electron diffraction, enthalpic response, and pair distribution function analysis. The as-achieved glassy-state hydroxide materials display a low OER overpotential of 269 mV at 20 mA cm-2 with a small Tafel slope of 33.3 mV dec-1, outperform the benchmark noble-metal RuO2 catalyst (341 mV, 84.9 mV dec-1) . Operando Raman and density functional theory studies reveal that the glassy state hydroxide converted into disordered active oxyhydroxide phase with optimized oxygen intermediates adsorption under low OER overpotentials, thus boosting the intrinsic electrocatalytic activity.

Enhanced stability of boron modified NiFe hydroxide for oxygen evolution reaction

The introduction of non-metal elements including boron has been identified as a significant means to enhance oxygen evolution reaction (OER) performance in NiFe-based catalysts. To understand the catalytic activity and stability, recent attention has widened toward the Fe species as a potential contributor, prompting exploration from various perspectives. Here, boron incorporation in NiFe hydroxide achieves significantly enhanced activity and stability compared to the boron-free NiFe hydroxide. The boron inclusion in NiFe hydroxide is found to show exceptionally improved stability from 12 to 100 hours at a high current density (200 mA cm-2). It facilitates the production and redeposition of OER-active, high-valent Fe species in NiFe hydroxide based on the operando Raman, UV-vis, and X-ray absorption spectroscopy analysis. It is proposed that preserving a homogenous distribution of Fe across the boron-containing catalyst surface enhances OER stability, unlike the bare NiFe hydroxide electrocatalyst, which exhibits uneven Fe dissolution, confirmed through elementary mapping analysis. These findings shed light on the potential of anionic regulation to augment the activity of iron, an aspect not previously explored in depth, and thus are expected to aid in designing practical OER electrocatalysts.

Combustion Growth of NiFe Layered Double Hydroxide for Efficient and Durable Oxygen Evolution Reaction

NiFe layered double hydroxide (LDH) with abundant heterostructures represents a state-of-the-art electrocatalyst for the alkaline oxygen evolution reaction (OER). Herein, NiFe LDH/Fe2O3 nanosheet arrays have been fabricated by facile combustion of corrosion-engineered NiFe foam (NFF). The in situ grown, self-supported electrocatalyst exhibited a low overpotential of 248 mV for the OER at 50 mA cm-2, a small Tafel slope of 31 mV dec-1, and excellent durability over 100 h under the industrial benchmarking 500 mA cm-2 current density. A balanced Ni and Fe composition under optimal corrosion and combustion contributed to the desirable electrochemical properties. Comprehensive ex-situ analyses and operando characterizations including Fourier-transformed alternating current voltammetry (FTACV) and in situ Raman demonstrate the beneficial role of modulated interfacial electron transfer, dynamic atomic structural transformation to NiOOH, and the high-valence active metal sites. This study provides a low-cost and easy-to-expand way to synthesize efficient and durable electrocatalysts.

Enhancing CO catalytic oxidation performance over Cu-doping manganese oxide octahedral molecular sieves catalyst

The CO oxidation catalytic activity of catalysts is strongly influenced by the oxygen vacancy defects (OVDs) concentration and the valence state of active metal. Herein, a defect engineering approach was implemented to enhance the oxygen vacancy defects and to modify the valence of metal ions in manganese oxide octahedral molecular sieves (OMS-2) by the introduction of copper (Cu). The characterization and theoretical calculation results reveal that the incorporation of Cu2+ ion into the OMS-2 structure led to a rise in specific surface area and pore volume, weakening of Mn-O bonds, higher proportion of the low-coordinated oxygen species adsorbed in oxygen vacancies (Oads) and an increase in the average oxidation state of manganese. These structural modifications were discovered to considerably reduce the apparent activation energy (Ea), thus ultimately significantly enhancing the CO oxidation activity (T99 at 148 ℃at GHSV = 13,200 h-1) than the original OMS-2 (T99 = 215 ℃ at GHSV = 13,200 h-1). Furthermore, In-situ diffuse reflectance infrared Fourier transform (DRIFT) and In-situ near-ambient pressure X-ray photoelectron spectroscopy (in situ NAP-XPS) results indicate that the bimetallic synergy enhanced by doping strategy accelerates the conversion of oxygen to chemisorbed oxygen species and the reaction rate of CO oxidation through Mn3++Cu2+↔Mn4++Cu+ redox cycle. The findings of this study offer novel perspectives on the design of catalysts with exceptional performance in CO oxidation.

Amorphous conversion in pyrolytic symmetric trinuclear nickel clusters trigger trifunctional electrocatalysts

The pursuit of multifunctional electrocatalysts holds significant importance due to their comprehension of material chemistry. Amorphous materials are particularly appealing, yet they pose challenges in terms of rational design due to their structural disorder and thermal instability. Herein, we propose a strategy that entails the tandem (low-temperature/250-350 °C) pyrolysis of molecular clusters, enabling preservation of the local short-range structures of the precursor Schiff base nickel (Ni3[2(C21H24N3Ni1.5O6)]). The temperature-dependent residuals demonstrate exceptional activity and stability for at least three distinct electrocatalytic processes, including the oxygen evolution reaction (η10 = 197 mV), urea oxidation reaction (η10 = 1.339 V), and methanol oxidation reaction (1358 mA cm-2 at 0.56 V). Three distinct nickel atom motifs are discovered for three efficient electrocatalytic reactions (Ni1 and Ni1' are preferred for UOR/MOR, while Ni2 is preferred for OER). Our discoveries pave the way for the potential development of multifunctional electrocatalysts through disordered engineering in molecular clusters under tandem pyrolysis.

Novel High-Entropy FeCoNiMoZn-Layered Hydroxide as an Efficient Electrocatalyst for the Oxygen Evolution Reaction

The exploration of catalysts for the oxygen evolution reaction (OER) with high activity and acceptable price is essential for water splitting to hydrogen generation. High-entropy materials (HEMs) have aroused increasing interest in the field of electrocatalysis due to their unusual physicochemical properties. In this work, we reported a novel FeCoNiMoZn-OH high entropy hydroxide (HEH)/nickel foam (NF) synthesized by a facile pulsed electrochemical deposition method at room temperature. The FeCoNiMoZn-OH HEH displays a 3D porous nanosheet morphology and polycrystalline structure, which exhibits extraordinary OER activity in alkaline media, including much lower overpotential (248 mV at 10 mA cm-2) and Tafel slope (30 mV dec-1). Furthermore, FeCoNiMoZn-OH HEH demonstrates excellent OER catalytic stability. The enhanced catalytic performance of the FeCoNiMoZn-OH HEH primarily contributed to the porous morphology and the positive synergistic effect between Mo and Zn. This work provides a novel insight into the design of HEMs in catalytic application.

Intercalated and Surface-Adsorbed Phosphate Anions in NiFe Layered Double-Hydroxide Catalysts Synergistically Enhancing Oxygen Evolution Reaction Activity

The oxygen evolution reaction (OER), a crucial semireaction in water electrolysis and rechargeable metal-air batteries, is vital for carbon neutrality. Hindered by a slow proton-coupled electron transfer, an efficient catalyst activating the formation of an O-H bond is essential. Here, we proposed a straightforward one-step hydrothermal procedure for fabricating PO43--modified NiFe layered double-hydroxide (NiFe LDH) catalysts and investigated the role of PO43- anions in enhancing OER. Phosphate amounts can efficiently regulate LDH morphology, crystallinity, composition, and electronic configuration. The optimized sample showed a low overpotential of 267 mV at 10 mA cm-2. Density functional theory calculations revealed that intercalated and surface-adsorbed PO43- anions in NiFe LDH reduced the Gibbs free energy in the rate-determining step of *OOH formation, balancing oxygen-containing intermediate adsorption/dissociation and promoting the OER. Intercalated phosphate ions accelerated precatalyst dehydrogenation kinetics, leading to a rapid reconstruction into active NiFe oxyhydroxide species. Surface-adsorbed PO43- interacted favorably with adsorbed *OOH on the active Ni sites, stabilizing *OOH. Overall, the synergistic effects of intercalated and surface-adsorbed PO43- anions significantly contributed to enhanced OER activity. Achieving optimal catalytic activity requires a delicate equilibrium between thermodynamic and kinetic factors by meticulously regulating the quantity of introduced PO43- ions. This endeavor will facilitate a deeper comprehension of the influence of anions in electrocatalysis for OER.

In Situ Fast Construction of Ni3S4/FeS Catalysts on 3D Foam Structure Achieving Stable Large-Current-Density Water Oxidation

By increasing the content of Ni3+, the catalytic activity of nickel-based catalysts for the oxygen evolution reaction (OER), which is still problematic with current synthesis routes, can be increased. Herein, a Ni3+-rich of Ni3S4/FeS on FeNi Foam (Ni3S4/FeS@FNF) via anodic electrodeposition to direct obtain high valence metal ions for OER catalyst is presented. XPS showed that the introduction of Fe not only further increased the Ni3+ concentration in Ni3S4/FeS to 95.02%, but also inhibited the dissolution of NiOOH by up to seven times. Furthermore, the OER kinetics is enhanced by the combination of the inner Ni3S4/FeS heterostructures and the electrochemically induced surface layers of oxides/hydroxides. Ni3S4/FeS@FNF shows the most excellent OER activity with a low Tafel slope of 11.2 mV dec-1 and overpotentials of 196 and 445 mV at current densities of 10 and 1400 mA cm-2, respectively. Furthermore, the Ni3S4/FeS@FNF catalyst can be operated stably at 1500 mA cm-2 for 200 h without significant performance degradation. In conclusion, this work has significantly increased the high activity Ni3+ content in nickel-based OER electrocatalysts through an anodic electrodeposition strategy. The preparation process is time-saving and mature, which is expected to be applied in large-scale industrialization.

Real Active Site Identification of Co/Co3O4 Anchoring Ni-MOF Nanosheets with Fast OER Kinetics for Overall Water Splitting

Doping metals and constructing heterostructures are pivotal strategies to enhance the electrocatalytic activity of metal-organic frameworks (MOFs). Nevertheless, effectively designing MOF-based catalysts that incorporate both doping and multiphase interfaces poses a significant challenge. In this study, a one-step Co-doped and Co3O4-modified Ni-MOF catalyst (named Ni NDC-Co/CP) with a thickness of approximately 5.0 nm was synthesized by a solvothermal-assisted etching growth strategy. Studies indicate that the formation of the Co-O-Ni-O-Co bond in Ni NDC-Co/CP was found to facilitate charge density redistribution more effectively than the Co-O-Ni bimetallic synergistic effect in NiCo NDC/CP. The designating Ni NDC-Co/CP achieved superior oxygen evolution reaction (OER) activity (245 mV @ 10 mA cm-2) and robust long stability (100 h @ 100 mA cm-2) in 1.0 M KOH. Furthermore, the Ni NDC-Co/CP(+)||Pt/C/CP(-) displays pregnant overall water splitting performance, achieving a current density of 10 mA cm-2 at an ultralow voltage of 1.52 V, which is significantly lower than that of commercial electrolyzer using Pt/C and IrO2 electrode materials. In situ Raman spectroscopy elucidated the transformation of Ni NDC-Co to Ni(Co)OOH under an electric field. This study introduces a novel approach for the rational design of MOF-based OER electrocatalysts.

In situ self-reconstructed hierarchical bimetallic oxyhydroxide nanosheets of metallic sulfides for high-efficiency electrochemical water splitting

The advancement of economically efficient electrocatalysts for alkaline water oxidation based on transition metals is essential for hydrogen production through water electrolysis. In this investigation, a straightforward one-step solvent method was utilized to spontaneously cultivate bimetallic sulfide S-FeCo1 : 1/NIF on the surface of a nickel-iron foam (NIF). Capitalizing on the synergistic impact between the bimetallic constituents and the highly active species formed through electrochemical restructuring, S-FeCo1 : 1/NIF exhibited remarkable oxygen evolution reaction (OER) performance, requiring only a 310 mV overpotential based on 500 mA cm-2 current density. Furthermore, it exhibited stable operation at 200 mA cm-2 for 275 h. Simultaneously, the catalyst demonstrated excellent hydrogen evolution reaction (HER) and overall water-splitting capabilities. It only requires an overpotential of 191 mV and a potential of 1.81 V to drive current densities of 100 and 50 mA cm-2. Density functional theory (DFT) calculations were also employed to validate the impact of the bimetallic synergistic effect on the catalytic activity of sulfides. The results indicate that the coupling between bimetallic components effectively reduces the energy barrier required for the rate-determining step in water oxidation, enhancing the stability and activity of bimetallic sulfides. The exploration of bimetallic coupling to improve the OER performance holds theoretical significance in the rational design of advanced electrocatalysts.

Heterostructured MoO3 Anchored Defect-Rich NiFe-LDH/NF as a Robust Self-Supporting Electrocatalyst for Overall Water Splitting

The rational design of inexpensive metal electrocatalysts with exciting catalytic activity for overall water splitting (OWS) remains a significant challenge. Heterostructures of NiFe layered double hydroxides (NiFe-LDHs) with abundant oxygen defects and tunable electronic properties have garnered considerable attention. Here, a self-supporting heterostructured catalyst (named MoO3/NiFe-NF) is synthesized via a hydrothermal method to grow NiFe-LDH with oxygen vacancies (OV) in situ on inexpensive nickel foam (NF). Subsequently, MoO3 is anchored and grown on the surface of NiFe-LDH by electrodeposition. The obtained catalysts achieved outstanding oxygen/hydrogen evolution reaction (OER/HER, 212 mV/85 mV@10 mA cm-2) performance in 1 m KOH. Additionally, when MoO3/NiFe-NF is utilized as the cathode and anode in OWS, a current density of 10 mA cm-2 can be obtained as an ultralow battery voltage of 1.43 V, a significantly lower value compared to the commercial electrolyzer incorporating Pt/C and IrO2 electrode materials. Finally, density functional theory (DFT) calculations and advanced spectroscopy technology are conducted to reveal the effects of heterojunctions and OV on the internal electronic structure of the electrical catalysts. Mainly, the present study provides a novel tactic for the rational design of remarkable, low-cost NiFe-LDH electrocatalysts with heterostructures for OWS.

Metal-Organic Frameworks: Direct Synthesis by Organic Acid-Etching and Reconstruction Disclosure as Oxygen Evolution Electrocatalysts

Metal-organic frameworks (MOFs) have emerged as promising oxygen evolution reaction (OER) electrocatalysts. Chemically bonded MOFs on supports are desirable yet lacking in routine synthesis, as they may allow variable structural evolution and the underlying structure-activity relationship to be disclosed. Herein, direct MOF synthesis is achieved by an organic acid-etching strategy (AES). Using π-conjugated ferrocene (Fc) dicarboxylic acid as the etching agent and organic ligand, a series of MFc-MOF (M=Ni, Co, Fe, Zn) nanosheets are synthesized on the metal supports. The crystal structure is studied using X-ray diffraction and low-dose transmission electron microscopy, which is quasi-lattice-matched with that of the metal, enabling in situ MOF growth. Operando Raman and attenuated total reflectance Fourier transform infrared spectroscopy disclose that the NiFc-MOF features dynamic structural rebuilding during OER. The reconstructed one showing optimized electronic structures with an upshifted total d-band center, high M-O bonding state occupancy, and localized electrons on adsorbates indicated by density functional theory calculations, exhibits outstanding OER performance with a fairly low overpotential (130 mV at 10 mA cm-2 ) and good stability (144 h). The newly established approach for direct MOF synthesis and structural reconstruction disclosure stimulate the development of more prudent catalysts for advancing OER.

Tuning electronic structure of hedgehog-like nickel cobaltite via molybdenum-doping for enhanced electrocatalytic oxygen evolution catalysis

As a typical spinel oxide, nickel cobaltite (NiCo2O4) is considered to be a promising and reliable oxygen evolution reaction (OER) catalyst due to its abundant oxidation states and the synergistic effect of multiple metal species. However, the electrocatalytic OER performance of NiCo2O4 has always been limited by the low specific surface area and poor intrinsic conductivity of spinels. Herein, the hedgehog-like molybdenum-doped NiCo2O4 (Mo-NiCo2O4) catalyst was prepared as an efficient OER electrocatalyst via a facile hydrothermal method followed with high-temperature annealing. The Mo-NiCo2O4-0.075 with Mo doping concentration of ∼ 1.95 wt% exhibits excellent OER performance with a low overpotential of 265 mV at a current density of 10 mA·cm-2and a Tafel slope of 126.63 mV·dec-1, as well as excellent cyclingstability.The results demonstrated that the hedgehog-like structure provides Mo-NiCo2O4 with the high surface area and mesopores that enhance electrolyte diffusion and optimal active site exposure. The in-situ Raman spectra and density functional theory calculations show that the Mo cations doping improve the intrinsic conductivity of the NiCo2O4 while modulating the chemisorption of intermediates. Meanwhile, the energy barriers of *OH and O* formation decrease significantly after Mo doping, effectively facilitating water dissociation and optimizing the reaction kinetics.

Enhancing oxygen evolution reactions in nanoporous high-entropy catalysts using boron and phosphorus additives

High-entropy alloy (HEA) catalysts are a novel area of research in catalysis that shows great potential for more efficient catalyst development. Recent studies have highlighted the promise of HEA catalysts in applications such as water-splitting electrodes, owing to their better stability and ability to improve catalytic activity compared to traditional catalysts. Dealloying, which is a process that removes elements from metallic alloys, is a popular method for creating nanoporous HEA catalysts with large surface areas and interconnected structures. This study focused on the fabrication of nanoporous HEA catalysts with boron and phosphorus additives for the oxygen evolution reaction (OER) in water splitting. Combining B or P with noble metals such as Ir or Ru enhances the OER activity and durability, showing synergistic interactions between metals and light elements. This study used electrochemical evaluations to determine the best-performing catalyst, identifying CoCuFeMoNiIrB as the best catalyst for OERs in alkaline media. X-ray photoemission spectroscopy (XPS) analysis revealed that B effectively shifted the transition elements to higher valence states and induced excess electrons on the Ir-B surface to promote OER catalysis.

Tuning the selectivity of the CO2 hydrogenation reaction using boron-doped cobalt-based catalysts

Direct CO2 hydrogenation to value-added chemicals is a promising path toward realizing the "carbon-neutral" goal. However, controlling the selectivity of CO2 hydrogenation toward desired products (e.g., CO and CH4) using non-precious metal-based catalysts is important but challenging. It is imperative to explore catalysts with high activity and stability. Herein, boron-doped cobalt nanoparticles supported on H-ZSM-5 were devised for CO2 hydrogenation to produce CO in a gas-solid flow system. Our results demonstrate that boron doping not only increases the CO2 adsorption capability of the catalyst but also optimizes the electronic state of Co for CO desorption during hydrogenation process. As a result, the boron-doped cobalt catalysts displayed an enhanced CO selectivity of 94.5% and a CO2 conversion rate of 45.6%, which is much higher than that of Co-ZSM-5 without boron doping. This study shows that the strategic design of metal borides is important for controlling the selectivity of desired products in the CO2 hydrogenation reaction.

Covalently Bonded Ni Sites in Black Phosphorene with Electron Redistribution for Efficient Metal-Lightweighted Water Electrolysis

The metal-lightweighted electrocatalysts for water splitting are highly desired for sustainable and economic hydrogen energy deployments, but challengeable. In this work, a low-content Ni-functionalized approach triggers the high capability of black phosphorene (BP) with hydrogen and oxygen evolution reaction (HER/OER) bifunctionality. Through a facile in situ electro-exfoliation route, the ionized Ni sites are covalently functionalized in BP nanosheets with electron redistribution and controllable metal contents. It is found that the as-fabricated Ni-BP electrocatalysts can drive the water splitting with much enhanced HER and OER activities. In 1.0 M KOH electrolyte, the optimized 1.5 wt% Ni-functionalized BP nanosheets have readily achieved low overpotentials of 136 mV for HER and 230 mV for OER at 10 mA cm-2. Moreover, the covalently bonding between Ni and P has also strengthened the catalytic stability of the Ni-functionalized BP electrocatalyst, stably delivering the overall water splitting for 50 h at 20 mA cm-2. Theoretical calculations have revealed that Ni-P covalent binding can regulate the electronic structure and optimize the reaction energy barrier to improve the catalytic activity effectively. This work confirms that Ni-functionalized BP is a suitable candidate for electrocatalytic overall water splitting, and provides effective strategies for constructing metal-lightweighted economic electrocatalysts.