A selective and atom-economic rearrangement of uridine by cascade biocatalysis for production of pseudouridine

N- to C-Glycoside Rearrangement of Uridine 5'-Phosphate in Two Enzymatic Steps for the Production of Pseudouridine 5'-Phosphate

Pseudouridine (Ψ) is an essential building block of synthetic RNA for medical applications, so methods for its efficient production receive increased interest. Reverse reaction of the Ψ-5'-phosphate (ΨMP) C-glycosidase, that is, d-ribose 5-phosphate (Rib5P) + uracil (Ura) → ΨMP + H2O, allows for the installment of the core β-C-riboside structure of Ψ in a completely selective and efficiently equilibrium-driven single-step transformation. However, providing the Rib5P substrate is challenging for process development and optimum solutions can vary depending on the specific production tasks considered. Here, we exploited the less known activity of purine/pyrimidine nucleotide 5'-phosphate nucleosidase (PpnN; EC 3.2.2.10) to cleave uridine 5'-phosphate (UMP), a relatively expedient starting material for ΨMP synthesis, under release of Rib5P and Ura. Using linear cascade transformation in two enzymatic steps performed in one pot, we demonstrate rearrangement of UMP into ΨMP (yield: ≥ 95%) and thereby obtain the C-riboside product at the solubility limit (∼1.5 mol/L) in a productivity of 2.9 × 102 g/L/h. We show that a previously reported R341A-Y347A double variant of Escherichia coli PpnN (RY) exhibited ∼5-fold higher specific activity toward UMP, and was ∼12-fold less sensitive to Rib5P inhibition, than the wild-type enzyme. Under conditions of C-glycosidase applied in twofold excess over PpnN to minimize the effect of Rib5P inhibition, cascade reaction with RY compared to wild-type PpnN still gave ∼5-fold enhanced productivity. In summary, we present a new synthetic route to ΨMP via N- to C-glycoside rearrangement of UMP. Compared to earlier approaches of cascade biocatalysis for ΨMP production from uridine or UMP, this new route is streamlined due to the direct release of Rib5P from the UMP substrate catalyzed by PpnN.

An Update: Enzymatic Synthesis for Industrial Applications

Supported by rapid technological advancements, biocatalytic applications have matured into sustainable, scalable, and cost-competitive alternatives to established chemical catalysis. This review presents the most recent examples of enzyme-based solutions for the manufacturing of molecules with extended carbon-carbon frameworks and multiple stereogenic centers at commercial scale, including peptide building blocks, (rare) sugars, synthetic (oligo)nucleotides, and terpenoids, such as (-)-Ambrox®. Novel enzyme classes are highlighted along with their potential applications-the synthesis of DNA/RNA, the depolymerization of synthetic plastics, or fully enzymatic protection/deprotection schemes-pointing toward the diversification and broader industrial utilization of biocatalysis-based processes.

Microbial Synthesis of Nucleosides: Advances and Prospects

Nucleosides and its derivatives are essential chemicals with extensive applications in the food, agricultural, and pharmaceutical industries. Chemical synthesis of these compounds often faces problems such as harsh reaction conditions and environmental pollution, whereas microbial synthesis provides a promising and sustainable alternative. This review discusses recent advances in the biosynthesis of nucleosides and their derivatives. It begins by discussing the biosynthetic pathways and metabolic regulatory systems found in bacteria such as Escherichia coli and Bacillus subtilis. Further, the progress on microbial production of various nucleosides is summarized, focusing on the strategies applied to optimize their synthesis such as feedback inhibition relief, enzyme engineering, and dynamic control. The review finishes with a discussion of the challenges and opportunities for efficient synthesis of nucleosides and their derivatives.

Biocatalytic Nucleobase Diversification of 4'-Thionucleosides and Application of Derived 5-Ethynyl-4'-thiouridine for RNA Synthesis Detection

Nucleoside and nucleotide analogues have proven to be transformative in the treatment of viral infections and cancer. One branch of structural modification to deliver new nucleoside analogue classes explores replacement of canonical ribose oxygen with a sulfur atom. Whilst biological activity of such analogues has been shown in some cases, widespread exploration of this compound class is hitherto hampered by the lack of a straightforward and universal nucleobase diversification strategy. Herein, we present a synergistic platform enabling both biocatalytic nucleobase diversification from 4'-thiouridine in a one-pot process, and chemical functionalization to access new entities. This methodology delivers entry across pyrimidine and purine 4'-thionucleosides, paving a way for wider synthetic and biological exploration. We exemplify our approach by enzymatic synthesis of 5-iodo-4'-thiouridine on multi-milligram scale and from here switch to complete chemical synthesis of a novel nucleoside analogue probe, 5-ethynyl-4'-thiouridine. Finally, we demonstrate the utility of this probe to monitor RNA synthesis in proliferating HeLa cells, validating its capability as a new metabolic RNA labelling tool.

Efficient Synthetic Access to Stable Isotope Labelled Pseudouridine Phosphoramidites for RNA NMR Spectroscopy

Here we report the efficient synthetic access to 13C/15N-labelled pseudouridine phosphoramidites, which were incorporated into a binary H/ACA box guide RNA/product complex comprising 77 nucleotides (nts) in total and into a 75 nt E. coli tRNAGly. The stable isotope (SI) labelled pseudouridines were produced via a highly efficient chemo-enzymatic synthesis. 13C/15N labelled uracils were produced via chemical synthesis and enzymatically converted to pseudouridine 5'-monophosphate (ΨMP) by using YeiN, a Ψ-5'-monophosphate C-glycosidase. Removal of the 5'-phosphate group yielded the desired pseudouridine nucleoside (Ψ), which was transformed into a phosphoramidite building suitable for RNA solid phase synthesis. A Ψ -building block carrying both a 13C and a 15N label was incorporated into a product RNA and the complex formation with a 63 nt H/ACA box RNA could be observed via NMR. Furthermore, the SI labelled pseudouridine building block was used to determine imino proton bulk water exchange rates of a 75 nt E. coli tRNAGly CCmnm5U, identifying the TΨC-loop 5-methyluridine as a modifier of the exchange rates. The efficient synthetic access to SI-labelled Ψ building blocks will allow the solution and solid-state NMR spectroscopic studies of Ψ containing RNAs and will facilitate the mass spectrometric analysis of Ψ-modified nucleic acids.

Precision Engineering of the Co-immobilization of Enzymes for Cascade Biocatalysis

The design and orderly layered co-immobilization of multiple enzymes on resin particles remain challenging. In this study, the SpyTag/SpyCatcher binding pair was fused to the N-terminus of an alcohol dehydrogenase (ADH) and an aldo-keto reductase (AKR), respectively. A non-canonical amino acid (ncAA), p-azido-L-phenylalanine (p-AzF), as the anchor for covalent bonding enzymes, was genetically inserted into preselected sites in the AKR and ADH. Employing the two bioorthogonal counterparts of SpyTag/SpyCatcher and azide-alkyne cycloaddition for the immobilization of AKR and ADH enabled sequential dual-enzyme coating on porous microspheres. The ordered dual-enzyme reactor was subsequently used to synthesize (S)-1-(2-chlorophenyl)ethanol asymmetrically from the corresponding prochiral ketone, enabling the in situ regeneration of NADPH. The reactor exhibited a high catalytic conversion of 74 % and good reproducibility, retaining 80 % of its initial activity after six cycles. The product had 99.9 % ee, which that was maintained in each cycle. Additionally, the double-layer immobilization method significantly increased the enzyme loading capacity, which was approximately 1.7 times greater than that of traditional single-layer immobilization. More importantly, it simultaneously enabled both the purification and immobilization of multiple enzymes on carriers, thus providing a convenient approach to facilitate cascade biocatalysis.

Systematic Engineering of Escherichia coli for Efficient Production of Pseudouridine from Glucose and Uracil

In this study, we proposed a biological approach to efficiently produce pseudouridine (Ψ) from glucose and uracil in vivo using engineered Escherichia coli. By screening host strains and core enzymes, E. coli MG1655 overexpressing Ψ monophosphate (ΨMP) glycosidase and ΨMP phosphatase was obtained, which displayed the highest Ψ concentration. Then, optimization of the RBS sequences, enhancement of ribose 5-phosphate supply in the cells, and overexpression of the membrane transport protein UraA were investigated. Finally, fed-batch fermentation of Ψ in a 5 L fermentor can reach 27.5 g/L with a yield of 89.2 mol % toward uracil and 25.6 mol % toward glucose within 48 h, both of which are the highest to date. In addition, the Ψ product with a high purity of 99.8% can be purified from the fermentation broth after crystallization. This work provides an efficient and environmentally friendly protocol for allowing for the possibility of Ψ bioproduction on an industrial scale.

Immobilization of Adenosine Derivatives onto Cellulose Nanocrystals via Click Chemistry for Biocatalysis Applications

Adenosine triphosphate (ATP) is a central molecule of organisms and is involved in many biological processes. It is also widely used in biocatalytic processes, especially as a substrate and precursor of many cofactors─such as nicotinamide adenine dinucleotide phosphate (NADP(H)), coenzyme A (CoA), and S-adenosylmethionine (SAM). Despite its great scientific interest and pivotal role, its use in industrial processes is impeded by its prohibitory cost. To overcome this limitation, we developed a greener synthesis of adenosine derivatives and efficiently selectively grafted them onto organic nanoparticles. In this study, cellulose nanocrystals were used as a model combined with click chemistry via a copper-catalyzed azide/alkyne cycloaddition reaction (CuAAC). The grafted adenosine triphosphate derivative fully retains its biocatalytic capability, enabling heterobiocatalysis for modern biochemical processes.

Snapshots of the Reaction Coordinate of a Thermophilic 2'-Deoxyribonucleoside/ribonucleoside Transferase

Nucleosides are ubiquitous to life and are required for the synthesis of DNA, RNA, and other molecules crucial for cell survival. Despite the notoriously difficult organic synthesis of nucleosides, 2'-deoxynucleoside analogues can interfere with natural DNA replication and repair and are successfully employed as anticancer, antiviral, and antimicrobial compounds. Nucleoside 2'-deoxyribosyltransferase (dNDT) enzymes catalyze transglycosylation via a covalent 2'-deoxyribosylated enzyme intermediate with retention of configuration, having applications in the biocatalytic synthesis of 2'-deoxynucleoside analogues in a single step. Here, we characterize the structure and function of a thermophilic dNDT, the protein from Chroococcidiopsis thermalis (CtNDT). We combined enzyme kinetics with structural and biophysical studies to dissect mechanistic features in the reaction coordinate, leading to product formation. Bell-shaped pH-rate profiles demonstrate activity in a broad pH range of 5.5-9.5, with two very distinct pKa values. A pronounced viscosity effect on the turnover rate indicates a diffusional step, likely product (nucleobase1) release, to be rate-limiting. Temperature studies revealed an extremely curved profile, suggesting a large negative activation heat capacity. We trapped a 2'-fluoro-2'-deoxyarabinosyl-enzyme intermediate by mass spectrometry and determined high-resolution structures of the protein in its unliganded, substrate-bound, ribosylated, 2'-difluoro-2'-deoxyribosylated, and in complex with probable transition-state analogues. We reveal key features underlying (2'-deoxy)ribonucleoside selection, as CtNDT can also use ribonucleosides as substrates, albeit with a lower efficiency. Ribonucleosides are the building blocks of RNA and other key intracellular metabolites participating in energy and metabolism, expanding the scope of use of CtNDT in biocatalysis.

Molecular Dynamics and Docking Simulations of Homologous RsmE Methyltransferases Hints at a General Mechanism for Substrate Release upon Uridine Methylation on 16S rRNA

In this study, molecular dynamics (MD) and docking simulations were carried out on the crystal structure of Neisseria Gonorrhoeae RsmE aiming at free energy of binding estimation (ΔGbinding) of the methyl transfer substrate S-adenosylmethionine (SAM), as well as its homocysteine precursor S-adenosylhomocysteine (SAH). The mechanistic insight gained was generalized in view of existing homology to two other crystal structures of RsmE from Escherichia coli and Aquifex aeolicus. As a proof of concept, the crystal poses of SAM and SAH were reproduced reflecting a more general pattern of molecular interaction for bacterial RsmEs. Our results suggest that a distinct set of conserved residues on loop segments between β12, α6, and Met169 are interacting with SAM and SAH across these bacterial methyltransferases. Comparing molecular movements over time (MD trajectories) between Neisseria gonorrhoeae RsmE alone or in the presence of SAH revealed a hitherto unknown gatekeeper mechanism by two isoleucine residues, Ile171 and Ile219. The proposed gating allows switching from an open to a closed state, mimicking a double latch lock. Additionally, two key residues, Arg221 and Thr222, were identified to assist the exit mechanism of SAH, which could not be observed in the crystal structures. To the best of our knowledge, this study describes for the first time a general catalytic mechanism of bacterial RsmE on theoretical ground.

Metabolic Engineering of Escherichia coli for Efficient Production of Pseudouridine

Pseudouridine-incorporated mRNA vaccines can enhance protein expression and reduce immunogenicity, leading to a high demand for pseudouridine to be used in mRNA drug production. To achieve the low-cost production of pseudouridine, Escherichia coli was systematically modified to utilize inexpensive raw materials to efficiently produce pseudouridine. First, in the pyrimidine biosynthesis pathway, genes related to the precursor competing pathway and the negative regulator were deleted, which increased pseudouridine production. Second, two critical genes, pseudouridine-5'-phosphate glycosidase (psuG) and phosphatase genes from different bacteria, were screened and employed in various genetic constructs, and the pseudouridine yield of the optical strain increased to 599 mg/L. The accumulation of pseudouridine was further increased by the deletion of pseudouridine catabolism-related genes. Ultimately, the pseudouridine titer in a 5 L bioreactor reached 7.9 g/L, and the yield of pseudouridine on glucose was 0.15 g/g. Overall, a cell factory producing pseudouridine was successfully constructed and showed potential for industrial production.