Regulation of molecular transport in polymer membranes with voltage-controlled pore size at the angstrom scale

Dynamic Short Hydrogen-Bonding Network Enhancing Hydrophilicity in Biomimetic Membranes with Artificial Water Channels for Efficient Removal of Dyes and Salts

The development of an integrated biomimetic membrane capable of rejecting both dyes and salts in a single step, while sustaining stable water permeation, presents a promising solution for textile wastewater treatment. Herein, we report a novel integrated biomimetic membrane integrating an I-quartet artificial water channel (AWC) with sulfonic acid-modified polyamide (PA-SO3H), which can stably reject both dyes and inorganic salts. The I-quartet channels (2.68 Å), formed via self-assembly of alkyl-ureido-ethyl-imidazole (HC8) molecules, facilitate selective water transport and rejection of both dyes and inorganic salts. Concurrently, the sulfonic acid groups (-SO3H) could grab water molecules, forming dynamic short hydrogen-bonding network (O-H⋅⋅⋅O). These hydrogen bonds not only serve as jumping force, lowering the energy barrier for water transport through the alternating hydrophilic-hydrophobic matrix, but also act as an effective antifouling barrier, significantly reducing membrane fouling. The optimal HC83.0-PA-SO3H membrane exhibits a water permeance of 13.4 L m-2 h-1 MPa-1, approximately 2.7-fold higher than that of the pristine PA membrane, and both high dyes and salts rejection efficiency. Moreover, the membrane sustains stable antifouling characteristics throughout a 19-day endurance test. This innovative membrane design provides a promising solution for the efficient separation of both dyes and inorganic salts in textile wastewater treatment.

3D Nanoscale Structures of Hydrated Polyamide Desalination Membranes Revealed by Cryogenic Transmission Electron Microscopy Tomography

Desalination via reverse osmosis (RO) membrane technology is a preferred solution to the ongoing global challenges of freshwater scarcity. The active separation layer of RO membranes is a polyamide thin film (<200 nm), whose morphology critically influences membrane performance. However, conflicting descriptions of trends between morphology and performance abound in the literature due to the lack of a rigorous morphological description of these membranes. Notably, comprehensive three-dimensional (3D) morphological characterization of these membranes has so far been conducted exclusively under dry conditions, which contrasts with the operational, hydrated state of these membranes. Here, we present, for the first time, characterization of the hydrated 3D nanoscale morphology of polyamide films from commercial brackish water (BW) and seawater (SW) membranes using cryo-transmission electron microscopy (cryo-TEM) tomography. Our findings reveal significant morphological differences between hydrated and dry membranes, resulting in variations in key structural parameters that impact performance. Both SW and BW membranes swell and increase in total volume and thickness upon hydration, with BW membranes exhibiting more pronounced swelling (32% vs 7% in volume and 35% vs 11% in effective thickness), primarily due to the lower degree of cross-linking of BW membranes. Additionally, while the surface area decreases upon hydration for both SW and BW membranes, indicating a smoothing of surface nodules and cavities, surface roughness remains unchanged, suggesting that current roughness measurement methods such as atomic force microscopy do not capture intrinsic morphological features. Overall, this study demonstrates the feasibility of employing cryo-TEM tomography techniques to characterize RO membrane morphology under operation relevant conditions, thus enabling a better linkage between membrane morphology and performance.

Selective removal of organic matters from high-salinity chemical industrial wastewater: Ultrafiltration or nanofiltration?

The effective separation and treatment of high-salinity chemical industrial wastewater has become a critical issue for the chemical industry. Membrane separation technology, including ultrafiltration (UF) and nanofiltration (NF) membranes, are potential candidates for selectively separating inorganic salts and organic compounds. In this study, we investigated the selective separation performance of real high-salinity chemical industrial wastewater by a series of commercial UF (UF10k, UF5k, UF3k, and UF1k) and NF (NF270, NF90, BSY90, BSY60, BSY30) membranes. UF1k exhibited the best separation performance among the various UF membranes, owing to its lowest molecular weight cut-off (MWCO) of 1 kDa. Further two-pass UF and coagulation-UF cannot effectively improve the separation performance of UF as the presence of low molecule weight organics in the wastewater. Among the NF membranes, we surprisingly found that some NF membranes, despite having smaller pore sizes theoretically, exhibited even lower rejection of organic matters than UF1k in high-salinity environments. Mechanistic investigation revealed that increased salt concentrations led to pore swelling, pore-wall dehydration and charge shielding effects in NF membranes, which resulted in a substantially enlarged MWCO. BSY90, the tightest NF membrane, exhibited the best performance in the rejection of organic compounds from the high-salinity chemical industrial wastewater, owing to its smallest pore size and highest zeta potential. Our findings offer guidance for the proper selection of UF and NF in the precise selective separation of substances in high-salinity chemical industrial wastewater.

Pulsatile Ion Transport in Nanofiltration Membranes Coupled with Electrically Tunable Pore and Hydroxyl Electrostatic Interactions

Pulsatile ion transport facilitates the adjusted transfer of substances, meeting the requirements for the gradient and timed separation of multiple components in membrane processes. Responsive nanofiltration membranes are thus currently receiving widespread attention but face limitations due to their narrow performance adjustment range. Herein, hydroxyl functional groups were introduced into electrically responsive nanofiltration membranes to broaden the adjustment range of separation performance through a combination of pore size sieving and functional group interactions, resulting in a greater change in rejection and flux compared to the original membrane. Membrane pore size is regulated by polypyrrole volume changes and becomes more variable when the cation's hydration radius is smaller. Although the hydroxyl group did not affect the charge transfer or volume change capacity of polypyrrole, it enhanced ion-pore interactions during ion transport, which was particularly pronounced in smaller nanochannels. The size effect of functional group interactions more strongly enhances the transmembrane energy barrier in the reduced state compared with the oxidized state, ultimately resulting in greater modulation of performance. This coupling strategy provides insights into the design of responsive membranes, offering the potential to achieve gradient separation of various solutes.

Recent Advancements in Fabrication, Separation, and Purification of Hierarchically Porous Polymer Membranes and Their Applications in Next-Generation Electrochemical Energy Storage Devices

In recent years, hierarchically porous polymer membranes (HPPMs) have emerged as promising materials for a wide range of applications, including filtration, separation, and energy storage. These membranes are distinguished by their multiscale porous structures, comprising macro-, meso-, and micropores. The multiscale structure enables optimizing the fluid dynamics and maximizing the surface areas, thereby improving the membrane performance. Advances in fabrication techniques such as electrospinning, phase separation, and templating have contributed to achieving precise control over pore size and distribution, enabling the creation of membranes with properties tailored to specific uses. In filtration systems, these membranes offer high selectivity and permeability, making them highly effective for the removal of contaminants in environmental and industrial processes. In electrochemical energy storage systems, the porous membrane architecture enhances ion transport and charge storage capabilities, leading to improved performance in batteries and supercapacitors. This review highlights the recent advances in the preparation methods for hierarchically porous structures and their progress in electrochemical energy storage applications. It offers valuable insights and references for future research in this field.

High-Performance Nanofiltration Membrane with Dual Resistance to Gypsum Scaling and Biofouling for Enhanced Water Purification

Nanofiltration (NF) technology is pivotal for ensuring a sustainable and reliable supply of clean water. To address the critical need for advanced thin-film composite (TFC) polyamide (PA) membranes with exceptional permselectivity and fouling resistance for emerging contaminant purification, we introduce a novel high-performance NF membrane. This membrane features a selective polypiperazine (PIP) layer functionalized with amino-containing quaternary ammonium compounds (QACs) through an in situ interfacial polycondensation reaction. Our investigation demonstrated that precise QAC functionalization enabled the construction of the selective PA layer with increased surface area, enhanced microporosity, stronger electronegativity, and reduced thickness compared to the control PIP membrane. As a result, the QAC NF membrane exhibited an approximately 51% increase in water permeance compared to the control PIP membrane, while achieving superior retention capabilities for divalent salts (>99%) and emerging organic contaminants (>90%). Furthermore, the incorporation of QACs into the PIP selective layer was proved to be effective in mitigating mineral scaling by allowing selective passage of scale-forming cations, while simultaneously exhibiting strong antimicrobial properties to combat biofouling. The in situ QAC incorporation strategy presented in this study provides valuable guidelines for the fit-for-purpose design of the selective PA layer, which is crucial for the development of high-performance NF membranes for efficient water purification.

Reconstructing Electrically Conductive Nanofiltration Membranes with an Aniline-Functionalized Carbon Nanotubes Interlayer for Highly Effective Toxic Organic Treatment

Conductive nanofiltration (CNF) membranes hold great promise for removing small organic pollutants from water through enhanced Donnan exclusion and electrocatalytic degradation. However, current CNF membranes face limitations in conductivity, structural stability, and nanochannel control strategies. This work addresses these challenges by introducing aniline-functionalized carbon nanotubes (NH2-CNTs) as an interlayer. NH2-CNTs enhance the dispersibility and adhesion of pristine carbon nanotubes, leading to a more conductive and stable composite nanofiltration membrane. The redesigned NH2-CNTs interlayered conductive nanofiltration (NICNF) membrane exhibits a 10-fold increase in conductivity and a high response degree (80%) with excellent cyclic stability, surpassing existing CNF membranes. The synergistic effects of enhanced Donnan exclusion, voltage switching, and electrocatalysis enable the NICNF membrane to achieve selective recovery of mixed dyes, 98.97% removal of residual wastewater toxicity, and a 5.2-fold increase in permeance compared to the commercial NF270 membrane. This research paves the way for next-generation multifunctional membranes capable of the efficient recovery and degradation of toxic organic pollutants in wastewater.

Thiol-Ene Click Reaction in Constructing Liquid Separation Membranes for Water Treatment

In the evolving landscape of water treatment, membrane technology has ascended to an instrumental role, underscored by its unmatched efficacy and ubiquity. Diverse synthesis and modification techniques are employed to fabricate state-of-the-art liquid separation membranes. Click reactions, distinguished by their rapid kinetics, minimal byproduct generation, and simple reaction condition, emerge as a potent paradigm for devising eco-functional materials. While the metal-free thiol-ene click reaction is acknowledged as a viable approach for membrane material innovation, a systematic elucidation of its applicability in liquid separation membrane development remains conspicuously absent. This review elucidates the pre-functionalization strategies of substrate materials tailored for thiol-ene reactions, notably highlighting thiolation and introducing unsaturated moieties. The consequential implications of thiol-ene reactions on membrane properties-including trade-off effect, surface wettability, and antifouling property-are discussed. The application of thiol-ene reaction in fabricating various liquid separation membranes for different water treatment processes, including wastewater treatment, oil/water separation, and ion separation, are reviewed. Finally, the prospects of thiol-ene reaction in designing novel liquid separation membrane, including pre-functionalization, products prediction, and solute-solute separation membrane, are proposed. This review endeavors to furnish invaluable insights, paving the way for expanding the horizons of thiol-ene reaction application in liquid separation membrane fabrication.

Optimized Polymeric Membranes for Water Treatment: Fabrication, Morphology, and Performance

Conventional polymers, endowed with specific functionalities, are extensively utilized for filtering and extracting a diverse set of chemicals, notably metals, from solutions. The main structure of a polymer is an integral part for designing an efficient separating system. However, its chemical functionality further contributes to the selectivity, fabrication process, and resulting product morphology. One example would be a membrane that can be employed to selectively remove a targeted metal ion or chemical from a solution, leaving behind the useful components of the solution. Such membranes or products are highly sought after for purifying polluted water contaminated with toxic and heavy metals. An efficient water-purifying membrane must fulfill several requirements, including a specific morphology attained by the material with a specific chemical functionality and facile fabrication for integration into a purifying module Therefore, the selection of an appropriate polymer and its functionalization become crucial and determining steps. This review highlights the attempts made in functionalizing various polymers (including natural ones) or copolymers with chemical groups decisive for membranes to act as water purifiers. Among these recently developed membrane systems, some of the materials incorporating other macromolecules, e.g., MOFs, COFs, and graphene, have displayed their competence for water treatment. Furthermore, it also summarizes the self-assembly and resulting morphology of the membrane materials as critical for driving the purification mechanism. This comprehensive overview aims to provide readers with a concise and conclusive understanding of these materials for water purification, as well as elucidating further perspectives and challenges.

Self-assembled dendrimer polyamide nanofilms with enhanced effective pore area for ion separation

Membrane technology using well-defined pore structure can achieve high ion purity and recovery. However, fine-tuning the inner pore structure of the separation nanofilm to be uniform and enhance the effective pore area is still challenging. Here, we report dendrimers with different peripheral groups that preferentially self-assemble in aqueous-phase amine solution to facilitate the formation of polyamide nanofilms with a well-defined effective pore range and uniform pore structure. The high permeabilities are maintained by forming asymmetric hollow nanostripe nanofilms, and their well-designed ion effective separation pore ranges show an enhancement, rationalized by molecular simulation. The self-assembled dendrimer polyamide membrane provides Cl-/SO42- selectivity more than 17 times that of its pristine polyamide counterparts, increasing from 167.9 to 2883.0. Furthermore, the designed membranes achieve higher Li purity and Li recovery compared to current state-of-the-art membranes. Such an approach provides a scalable strategy to fine-tune subnanometre structures in ion separation nanofilms.

Solar-driven membrane separation for direct lithium extraction from artificial salt-lake brine

The demand for lithium extraction from salt-lake brines is increasing to address the lithium supply shortage. Nanofiltration separation technology with high Mg2+/Li+ separation efficiency has shown great potential for lithium extraction. However, it usually requires diluting the brine with a large quantity of freshwater and only yields Li+-enriched solution. Inspired by the process of selective ion uptake and salt secretion in mangroves, we report here the direct extraction of lithium from salt-lake brines by utilizing the synergistic effect of ion separation membrane and solar-driven evaporator. The ion separation membrane-based solar evaporator is a multilayer structure consisting of an upper photothermal layer to evaporate water, a hydrophilic porous membrane in the middle to generate capillary pressure as the driving force for water transport, and an ultrathin ion separation membrane at the bottom to allow Li+ to pass through and block other multivalent ions. This process exhibits excellent lithium extraction capability. When treating artificial salt-lake brine with salt concentration as high as 348.4 g L-1, the Mg2+/Li+ ratio is reduced by 66 times (from 19.8 to 0.3). This research combines ion separation with solar-driven evaporation to directly obtain LiCl powder, providing an efficient and sustainable approach for lithium extraction.

Electrically Redox-Active Membrane with Switchable Selectivity to Contaminants for Water Purification

Membrane technology provides an attractive approach for water purification but faces significant challenges in separating small molecules due to its lack of satisfactory permselectivity. In this study, a polypyrrole-based active membrane with a switchable multi-affinity that simultaneously separates small ionic and organic contaminants from water was created. Unlike conventional passive membranes, the designed membrane exhibits a good single-pass filtration efficiency (>99%, taking 1-naphthylamine and Pb2+ as examples) and high permeability (227 L/m2/h). Applying a reversible potential can release the captured substances from the membrane, thus enabling membrane regeneration and self-cleaning without the need for additives. Advanced characterizations reveal that potential switching alters the orientation of the doped amphipathic molecules with the self-alignment of the hydrophobic alkyl chains or the disordered sulfonate anions to capture the target organic molecules or ions via hydrophobic or electrostatic interactions, respectively. The designed smart membrane holds great promise for controllable molecular separation and water purification.