Wood xerogel for fabrication of high-performance transparent wood

Transparent bamboo as a replacement for glass: Effects of lignin decolorisation methods on weatherability

Transparent bamboo proved to be a promising substitute for glass due to its high light transmittance and excellent mechanical properties. Nevertheless, it was susceptible to outdoor weathering, which negatively affected its physical and mechanical properties. In this study, two decolorisation methods, namely the delignification method and the lignin modification method, were used to produce transparent bamboos with epoxy resin, referred to as DL-TB and LM-TB, respectively. The changes in surface color, optical and mechanical properties, wettability, thermal stability, and thermal insulation properties of transparent bamboo during accelerated UV weathering were evaluated. Additionally, the deterioration mechanism of DL-TB and LM-TB was investigated. The findings revealed that DL-TB demonstrated better transparency and mechanical properties than LM-TB, although it exhibited lower thermal insulation properties. Furthermore, DL-TB demonstrated enhanced color stability and higher hydrophobicity on weathered surfaces than LM-TB. Unexpectedly, the tensile properties of both two transparent bamboos significantly improved after weathering, especially for LM-TB, which was due to the EP post-curing and the formation of more hydrogen bonds between lignin and EP. These observations revealed that lignin played a key role in the photodegradation process of transparent bamboo, but further attempts should be made in future studies to improve its color stability.

"Bottom-up" and "top-down" strategies toward strong cellulose-based materials

Cellulose, as the most abundant natural polymer on Earth, has long captured researchers' attention due to its high strength and modulus. Nevertheless, transferring its exceptional mechanical properties to macroscopic 2D and 3D materials poses numerous challenges. This review provides an overview of the research progress in the development of strong cellulose-based materials using both the "bottom-up" and "top-down" approaches. In the "bottom-up" strategy, various forms of regenerated cellulose-based materials and nanocellulose-based high-strength materials assembled by different methods are discussed. Under the "top-down" approach, the focus is on the development of reinforced cellulose-based materials derived from wood, bamboo, rattan and straw. Furthermore, a brief overview of the potential applications fordifferent types of strong cellulose-based materials is given, followed by a concise discussion on future directions.

A Universal Biomacromolecule-Enabled Assembly Strategy for Constructing Multifunctional Aerogels with 90% Inorganic Mass Loading from Inert Nano-Building Blocks

Inert inorganic nano-building blocks, such as carbon nanotubes (CNTs) and boron nitride (BN) nanosheets, possess excellent physicochemical properties. However, it remains challenging to build aerogels with these inert nanomaterials unless they are chemically modified or compounded with petrochemical polymers, which affects their intrinsic properties and is usually not environmentally friendly. Here, a universal biomacromolecule-enabled assembly strategy is proposed to construct aerogels with 90 wt% ultrahigh inorganic loading. The super-high inorganic content is beneficial for exploiting the inherent properties of inert nanomaterials in multifunctional applications. Taking chitosan-CNTs aerogel as a proof-of-concept demonstration, it delivers sensitive pressure response as a pressure sensor, an ultrahigh sunlight absorption (94.5%) raising temperature under light (from 25 to 71 °C within 1 min) for clean-up of crude oil spills, and superior electromagnetic interference shielding performance of up to 68.9 dB. This strategy paves the way for the multifunctional application of inert nanomaterials by constructing aerogels with ultrahigh inorganic loading.

Powering the Future Green Buildings: Multifunctional Ultraviolet-Shielding Transparent Wood

Indoor UV damage is a serious problem that is often ignored. Common glasses cannot filter UV rays well and have fragility and environmental issues. UV-shielding transparent wood (TW) holds promise, yet striking the right balance between blocking UV rays and allowing sufficient visible-light transmission poses a challenge. The pronounced capillary force, fueled by persistent moisture and extractives in wood, alongside the existence of multiphase interfaces, collectively hinder the uniform penetration of polymers and the effective dispersion of nanomaterials within the wood skeleton. Here, we incorporate high-pressure supercritical CO2 fluid-assisted impregnation (HSCFI) into fabricating UV-shielding TW. The supercritical CO2 pretreatment efficiently eliminates moisture and refines wood structure by extracting polar substances, resulting in a prominent 52.4% increase in average water permeability. Subsequently, this HSCFI method facilitates the infiltration of methyl methacrylate (MMA) monomer and Ce-ZnO nanorods (NRDs) into the refined anhydrous wood, leveraging the excellent solvency of supercritical CO2 for MMA. The impregnation rate of PMMA undergoes a substantial increase from 34.5 to 59.1%. With the robust UV-blocking capability of Ce-ZnO NRDs, thanks to dual-valence Ce doping widening the ZnO energy gap via the Burstein-Moss effect and their unique photoactive microstructure featuring a solid prism with a sharp hexahedral pyramidal tip, along with intrinsic physical scattering/reflection actions, Ce-ZnO NRDs@TW achieves an impressive 99.6% UVA radiation blockage (the highest for TW) and maintains high visible-light transmission (83.2%). Furthermore, Ce-ZnO NRDs@TW presents favorable energy-saving, sound absorption, and antifungal abilities, making it a promising candidate for future green buildings.

Cellulose-derived raw materials towards advanced functional transparent papers

Pulp and paper are gradually transforming from a traditional industry into a new green strategic industry. In parallel, cellulose-derived transparent paper is gaining ground for the development of advanced functional materials for light management with eco-friendly, high performance, and multifunctionality. This review focuses on methods and processes for the preparation of cellulose-derived transparent papers, highlighting the characterization of raw materials linked to responses to different properties, such as optical and mechanical properties. The applications in electronic devices, energy conversion and storage, and eco-friendly packaging are also highlighted with the objective to showcase the untapped potential of cellulose-derived transparent paper, challenging the prevailing notion that paper is merely a daily life product. Finally, the challenges and propose future directions for the development of cellulose-derived transparent paper are identified.

Releasing Free Radicals in Precursor Triggers the Formation of Closed Pores in Hard Carbon for Sodium-Ion Batteries

Increasing closed pore volume in hard carbon is considered to be the most effective way to enhance the electrochemical performance in sodium-ion batteries. However, there is a lack of systematic insights into the formation mechanisms of closed pores at molecular level. In this study, a regulation strategy of closed pores via adjustment of the content of free radicals is reported. Sufficient free radicals are exposed by part delignification of bamboo, which is related to the formation of well-developed carbon layers and rich closed pores. In addition, excessive free radicals from nearly total delignification lead to more reactive sites during pyrolysis, which competes for limited precursor debris to form smaller microcrystals and therefore compact the material. The optimal sample delivers a large closed pore volume of 0.203 cm3 g-1, which leads to a high reversible capacity of 350 mAh g-1 at 20 mA g-1 and enhanced Na+ transfer kinetics. This work provides insights into the formation mechanisms of closed pores at molecular level, enabling rational design of hard carbon pore structures.

Lightweight, Strong, and Transparent Wood Films Produced by Capillary Driven Self-Densification

Wood delignification and densification enable the production of high strength and/or transparent wood materials with exceptional properties. However, processing needs to be more sustainable and besides the chemical delignification treatments, energy intense hot-pressing calls for alternative approaches. Here, this study shows that additional softening of delignified wood via a mild swelling process using an ionic liquid-water mixture enables the densification of tube-line wood cells into layer-by-layer sheet structures without hot-pressing. The natural capillary force induces self-densification in a simple drying process resulting in a transparent wood film. The as-prepared films with ≈150 µm thickness possess an optical transmittance ≈70%, while maintaining optical haze >95%. Due to the densely packed sheet structure with a large interfacial area, the reassembled wood film is fivefold stronger and stiffer than the delignified wood in fiber direction. Owing to a low density, the specific tensile strength and elastic modulus are as high as 282 MPa cm3 g-1 and 31 GPa cm3 g-1. A facile and highly energy efficient wood nanotechnology approach are demonstrated toward more sustainable materials and processes by directly converting delignified wood into transparent wood omitting polymeric matrix infiltration or mechanical pressing.

Synthesis of lignin-based resin and fabrication of sustainable transparent wood based on bio-recycling concept

Transparent wood (TW) has attracted much attention in the field of energy saving building structural materials because of its high light transmittance, good thermal insulation performance and good toughness. However, the polymeric resins used in the present study to impregnate lignin-based wood templates are usually derived from petroleum-based chemical resources, which pose a fatal threat to human beings both in terms of consuming large amounts of resources and causing environmental pollution problems. It is therefore important to develop alternatives to petroleum-derived chemicals in renewable natural resources. Here, we report a green and sustainable TW production process based on the bio-recycling concept. Lignin-based sustainable resin (LSR) was prepared from waste lignin produced during delignification by polymerization of guaiacol. At the same time, according to FT-IR and NMR data analysis combined with previous studies, the synthesis mechanism of LSR was proposed, and this result provided a reference for bio-based resins made from biomass materials. The prepared lignin-based sustainable transparent wood (LSTW) has good light transmittance and good dimensional stability. In addition, the LSTW also shows good thermal insulation and indoor temperature regulation capabilities compared with the common glass.

Construction and mechanism analysis of flame-retardant, energy-storage and transparent bio-based composites based on natural cellulose template

With the proposal of sustainable development strategy, bio-based energy storage transparent wood (TW) has shown broad application value in green buildings, cold chain transportation, and optoelectronic device fields. However, its application in most fields is limited due to its own flammability. In this study, epoxy resin, triethyl phosphate (TEP) and polyethylene glycol (PEG) were introduced into delignified balsa wood template by vacuum pressure impregnation, and bio-based TW/PEG/TEP integrating flame retardant, high strength and phase-change energy-storage performance was prepared. TW/PEG composites have no leakage during phase change process and their transparency is up to 95 %. Compared with TW/PEG, the shielding effect of char layer and the inhibition effect in condensed and gas phase significantly decrease the total heat release of TW/PEG/TEP. TW/PEG/TEP biocomposites still maintained a high enthalpy of phase change and a low peak melting temperature, which was conducive to its application around the area of low temperature phase change energy storage. In addition, the tensile strength of TW/PEG/TEP was nearly 4 times higher than that of DW, and its toughness was obviously enhanced. TW/PEG/TEP biocomposites conformed to the current concept of energy-saving and green development. It has the potential to replace traditional petrochemical-based materials and shows excellent application prospects in emerging fields.

Programmable and Shape-Color Synchronous Dual-Response Wood with Thermal Stimulus

Stimuli-responsive materials exhibit huge potential in sensors, actuators, and electronics; however, their further development for reinforcement, visualization, and biomass-incorporation remains challenging. Herein, based on the impregnation of thermochromic microcapsule (TCM)-doped dynamic covalent vitrimers, a programmable shape-color dual-responsive wood (SRW-TC) was demonstrated with robust anisotropic structures and exchangeable covalent adaptable networks. Under mild conditions, the resultant SRW-TC displays feasible shape memorability and programmability, resulting from the rigidity-flexibility shift induced by the glass-transition temperature (34.99 °C) and transesterification reaction triggered by the topology freezing transition temperature (149.62 °C). Furthermore, the obtained SRW-TC possesses satisfactory mechanical performance (tensile strength of 45.70 MPa), thermal insulation (thermal conductivity of 0.27 W/m K), anisotropic light management, and benign optical properties (transmittance of 51.73% and haze of 99.67% at 800 nm). Importantly, the incorporation of compatible TCM enables SRW-TC to visualize shape memory feasibility and rigidity/flexibility switching and respond to the external thermal stimulus through the thermal-induced shape-color synchronous dual-responsiveness, which successfully demonstrates the applications of sensing temperature, grasping objects, encrypting/decoding icon messages, and so on. The proposed facile and highly effective strategy could serve as a guideline for developing high-performance multifunctional wood composite with promising intelligent applications in performance visualization, environmental sensing, materials interactivity, information dual-encryption, local precision shape and color regulation, etc.

Lignocellulose-Based Optical Biofilter with High Near-Infrared Transmittance via Lignin Capturing-Fusing Approach

Near-infrared (NIR) transparent optical filters show great promise in night vision and receiving windows. However, NIR optical filters are generally prepared by laborious, environmentally unfriendly processes that involve metal oxides or petroleum-based polymers. We propose a lignin capturing-fusing approach to manufacturing optical biofilters based on molecular collaboration between lignin and cellulose from waste agricultural biomass. In this process, lignin is captured via self-assembly in a cellulose network; then, the lignin is fused to fill gaps and hold the cellulose fibers tightly. The resulting optical biofilter featured a dense structure and smooth surface with NIR transmittance of ~90%, ultralow haze of close to 0%, strong ultraviolet-visible light blocking (~100% at 400 nm and 57.58% to 98.59% at 550 nm). Further, the optical biofilter has comprehensive stability, including water stability, solvent stability, thermal stability, and environmental stability. Because of its unique properties, the optical biofilter demonstrates potential applications in the NIR region, such as an NIR-transmitting window, NIR night vision, and privacy protection. These applications represent a promising route to produce NIR transparent optical filters starting from lignocellulose biomass waste.

An Azomethine-H-Based Fluorogenic Sensor for Formic Acid

Formic acid (FA) is an important C1-containing feedstock that serves as a masked source of dihydrogen gas (H2). To encourage the adoption of cleaner (noncarbonaceous) energy sources, FA detection and sensing is thus of considerable interest. Here, we examine the use of a commercially available dye, azomethine-H (Az-H), for FA sensing. Solution studies confirm that FA quenches both the absorbance and the luminescence properties of Az-H. FA was additionally found to attenuate a known Az-H (E)-to-(Z) conformational change, suggesting an Az-H/FA interaction, possibly through hydrogen bonding; this phenomenon was probed using 1H NMR spectroscopy. Moving toward a solid-state sensor, the Az-H probe was incorporated into a gelatin-based matrix. On exposure to FA, the luminescence of this system was found to increase in a FA-dependent manner, attributed to the formation of stable hydrogen-bonded structures, facilitating a (Z)-to-(E) isomerization via imine protonation, allowing for production of the more luminescent (E)-isomer. This fluorogenic signal was used as a FA sensor with an estimated detection limit of ca. 0.4 ppb FA vapor. This work constitutes an important step toward a highly sensitive FA sensor in both the solution and solid state, opening new space for the detection of organic acids in differing chemical environments.