Efficient and selective capture of thorium ions by a covalent organic framework

Enhanced selective adsorption of rare earth elements from wastewater using Pinus massoniana-derived carbon-nano zero-valent iron

The recovery of rare earth elements (REEs) from wastewater is crucial for promoting a circular economy and mitigating the environmental impacts associated with resource extraction. In this study, we synthesized a novel adsorbent, Pinus massoniana-derived carbon-nano zero-valent iron (PML-C@nZVI), using a self-coordination-assisted thermal reductive crystallization strategy. This material was applied to selectively recover REEs from real mining wastewater. PML-C@nZVI exhibited exceptional selectivity for REEs, with separation factors of 1.03 × 105 (Y/Mn) and 1.02 × 102 (Y/Ce), surpassing most existing adsorbents. Structural characterization revealed that the material's high specific surface area (218.36 m2/g), mesoporous architecture, and abundant defect structures facilitated the exposure of uncoordinated -OH and -COOH groups. Importantly, the graphitic carbon matrix induced electron delocalization within the Fe⁰ core, creating an electron-rich environment at C-OH and C-COOH sites. This significantly enhanced the selective adsorption of Y(III) through electrostatic and coordinative interactions. Furthermore, PML-C@nZVI demonstrated remarkable stability over five regeneration cycles, retaining 75.6 % adsorption efficiency and 81.0 % desorption efficiency. These results underscore its potential for industrial applications. This work advances the design of high-performance REE-selective adsorbents and bridges environmental remediation with sustainable resource recovery, offering a dual-strategy solution for wastewater valorization.

Selective Separation of Thorium from Rare Earth Ions Using Bisphosphonate-Functionalized Ionic Single Crystals Co-Self-Assembled via π-π and Ionic Interactions

In this study, new bisphosphonate-functionalized ionic organic crystals (IOCs) were developed by π-π and ionic interactions with the high oxygen content of the phosphonic acid group. Meanwhile, this novel material achieved an extremely high selectivity of Th adsorption with a saturation adsorption capacity of 426 mg/g. In addition, the heat resistance (400 °C) and the recyclability (more than five cycles) make the IOCs economical for their extraordinary stability. Moreover, we use single-crystal X-ray diffraction to determine the monomer connections and the ionic bonds. We used kinetic fitting and X-ray photoelectron spectroscopy testing to explain the adsorption mechanism, which reveals a monolayer adsorption process with a distinct O-Th bond post-adsorption. This study not only gave an example to develop new ionic single crystals based on different functional groups but also expanded the potential application to use these new types of nanomaterials.

Covalent organic framework nanomaterials: Syntheses, architectures, and applications

Covalent Organic Frameworks (COFs) are characterized by high thermochemical stability, low backbone density, well-controlled physical and chemical properties, large specific surface volume and porosity, permanently open pore structure, and various synthesis strategies. These remarkable attributes confer COFs with significant potential for a myriad of applications ranging from catalysis technology, gas separation and storage, optoelectronic materials, environmental and energy sciences, and biomedical development. There are many synthetic design methods for COF materials, and dynamic covalent chemistry is the scientific basis of COF materials-oriented design, which gives the error correction ability of the covalent assembly process, and is the key to obtaining crystallization and stability at the same time. However, "crystallinity" and "stability" in the synthesis and preparation of COF materials are often like "You can't have your cake and eat it, too": on the one hand, the reversible covalent bonds used in the synthesis of highly crystalline COF framework are easy to decompose under extreme conditions, which greatly limits its application scenarios; On the other hand, although highly stable COF materials can be prepared by using irreversible covalent bonds, it is usually poor crystalline and difficult to have high performance. In addition, the strict deoxygenation operation required for synthesizing COF materials also limits its macro preparation and large-scale application. Therefore, the synthesis strategy and efficient preparation of highly stable and crystalline COF materials are a major obstacle to the practical application of this field. This paper describes the four structures of COF materials, as well as their synthesis methods, electrical energy-storing electrocatalysis, and significant environmental protection applications. The future directions, prospects, and possible barriers to the development of these materials are envisioned in.

Selective Electrochemical Capture of Monovalent Cations Using Crown Ether-Functionalized COFs

Electrochemical adsorption offers a promising approach for the separation of monovalent cations, which is an important but challenging subject in separation science. However, progress in this area has been hampered by the lack of suitable materials with effective ion selectivity. In this work, we present the synthesis of covalent organic frameworks (COFs) functionalized with a series of crown ethers (NCx-TAB-COFs, x donate 12, 15, 18, indicating the size of crown ether) for the efficient and highly selective electrochemical capture of monovalent cations. In our design, crown ether moieties act as confinement sites, imparting high selectivity for different monovalent cations depending on the cavity dimensions of the crown ether present. COFs electrodes prepared using the novel crown-COFs exhibit superior performance for the selective sequestration of monovalent (alkali metal) cations. Notably, 18-crown-6 ether-substituted COF (NC18-TAB-COF) shows a remarkable selectivity (14.26) for K+ over Na+ and a substantial Rb+/Na+ selectivity of 22.4. Furthermore, NCx-TAB-COFs maintain their remarkable selectivity and capacity under mixed-cation conditions. Density functional theory calculations and molecular dynamics simulations suggest that the unexpectedly high selectivity for larger cations is likely due to diverse binding modes in conjunction with the porous structure of the COFs. Given their lower dehydration-free energies and smaller hydrodynamic radii, K+, Rb+, and Cs+ more readily permeate the confined channels of COFs. In contrast, Na+ and Li+, with higher dehydration-free energies and hydrodynamic radii, diffuse into the NCx-TAB-COFs structure at a much slower rate and are bound predominantly to the surfaces of the COFs.

Functionalized 2D multilayered MXene for selective and continuous recovery of rare earth elements from real wastewater matrix

Rare earth elements (REEs) are the "fuel" for high-tech industry, yet their selective recovery from complex waste matrices is challenging. Herein, we designed a 2D multilayered MXene Ti3C2Tx adsorbent for selective extraction of REEs in a broad pH range. By establishing strong Lewis acid-base interactions, extraction capacities of Ti3C2Tx to Eu(III) and Ho(III) reached 892.8 and 649.2 mg/g, respectively, even at pH 2.0. Following the Valence Matching Principle, the Ti3C2Tx adsorbent also demonstrated high selectivity for recovery of various REEs from real REEs processing wastewater and actual sludge from magnet manufacturing industry. To demonstrate the practical feasibility, a layer-stacked membrane of Ti3C2Tx supported on polyethersulfone substrate was fabricated for continuous recovery of REEs and exhibited excellent removal of Eu(III) (99.1 % at pH 5.0), showcasing its potential for large-scale applications. DFT calculations and material characterization demonstrated that chemisorption between Lewis acid (REEs cations) and Lewis base (F and O) sites is the main adsorption process involved in the uptake of Eu(III) and Ho(III). Finally, both the Ti3C2Tx adsorbent and membrane were successfully regenerated and reused via simple acid wash. Overall, the results demonstrate the Ti3C2Tx-based recovery as a promising path for sustainable harvesting of REEs.

Engineered covalent organic frameworks (COFs) for adsorption-based metal separation technologies: A critical review

Porous covalent organic frameworks (COFs) are promising materials used for separation and purification during environmental remediation. This critical review focuses on two key aspects. First, it critically examines strategies to improve COF design and structure and evaluates their impact on separation performance. Second, engineering approaches for enhancing the interactions between COF-based adsorbents and metals for enhanced separation and capture are elucidated. The latest body of research on separating metals (e.g., Li, K, Sr, Hg, Cd, Pb, Cr, Au, Ag, Pd, and U) using COF-based adsorbents is discussed to understand the factors that influence their performance. However, it is to be noted that COF-based adsorbents are still in their infancy and remain largley unexplored, mainly hindered by synthetic complexities and suboptimal crystalline structures. This highlights the need for further research and development to fully unlock the excellent potential of COFs for metal separation applications, particularly in environmental and energy applications.

Native corncob-derived biosorbent with grafted 1,3,4-thiadiazole for enhanced adsorption of palladium in metallurgical wastewater

The reuse of agricultural waste brings significant benefits but still faces a multitude of challenges. In this work, novel precious metal sorbents were constructed by grafting 1,3,4-thiadiazole-2-thiol (MTD) and 2,5-dithiadiazole-1,3,4-thiadiazole (DMTD) onto native corncob, which could rapidly and selectively recover palladium (Pd) from metallurgical wastewater. The characterization of the sorbents by powder X-ray diffraction indicated that introducing MTD or DMTD on native corncob did not alter the crystallinity and inherent structural framework. Corn-2 (grafted with DMTD) exhibited good resistance to various coexisting ions and rapidly extracted Pd from metallurgical wastewater over a minimum of ten cycles. Both Langmuir models and pseudo-second-order kinetic models describe the adsorption process. Rapid and continuous extraction of Pd from metallurgical wastewater was achieved by fixed-bed adsorption on Corn-2 over at least three adsorption-desorption cycles. A fixed-bed column containing 1.0 g of this biosorbent recovered Pd from 3.5 L metallurgical wastewater with a Pd concentration of 8.1 mg/L before exhaustion and achieved a Pd concentration of 1986 mg/L in the eluate. Theoretical calculations and spectroscopic analysis showed that sulfur and nitrogen atoms significantly contribute to the recovery process, and coordination is the primary mechanism for Pd(II) recovery. This study highlights the suitability of cellulose-based adsorbents for the efficient extraction of Pd from metallurgical wastewater and provides valuable insights into resource utilization opportunities for agricultural waste.

Covalent organic frameworks with nitrogen-rich triazine units and suitable pore size for highly efficient adsorption and sensitive detection of bisphenols in water

Herein, using 1,3,5-triformylphloroglucinol (Tp) and 4,4',4″-(1,3,5-triazine-2,4,6-triyl) tris(1,1'-biphenyl) trianiline (Ttba) as ligands, nitrogen-rich triazine unit-based covalent organic frameworks (COFs) with a suitable pore size, named TpTtba-COFs, were synthesized, and they were employed as adsorbents for the extraction and detection of three bisphenols (BPs)-BP A (BPA), BP B (BPB), and BP S (BPS)-in water. Using 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (Tapt) and 1,3,5-tris(4-aminophenyl)benzene (Tapb) ligands as substitutes for Ttba, nitrogen-rich triazine unit-based COFs with a smaller pore size and nitrogen-poor triazine unit-based COFs, named TpTapt-COFs and TpTapb-COFs, respectively, were also prepared for comparison. The adsorption performances of the three COF adsorbents with regard to the three BPs were tested. Owing to nitrogen-rich triazine units and a pore size suitable for BP adsorption, the maximum adsorption capacities of TpTtba-COFs for BPA, BPB, and BPS were 1.13, 1.33, and 1.37 times those of TpTapt-COFs and 2.10, 2.27, and 1.92 times those of TpTapb-COFs, respectively. The adsorption behavior and possible adsorption mechanism of the BPs on the TpTtba-COFs were also investigated. In addition, a TpTtba-COF-based dispersive solid-phase extraction-high-performance liquid chromatography/ultraviolet method exhibited an excellent linear range (1-800 ng/mL) and satisfactory limit of detection values (0.20-0.32 ng/mL) for the three BPs. The spiked recoveries of the three BPs in river and lake water ranged within 81.9%-101.9% and 82.8%-100.8%, respectively. Overall, this study offers valuable insights into the rational design of adsorbents for adsorption and sensitive detection of BPs in environmental water.

3D-Porous Carbon Nitride Through Proton Regulation and Photocatalytic Synergy for Efficient Uranium Extraction From Seawater

Extracting uranium from seawater is crucial for tapping oceanic resources vital to future energy supply. This study synthesized a novel nitrogen vacancy carbon nitride (NCN) grafted polyethyleneimine (PEI) composite material (NCNP). Experiments and molecular dynamics simulations reveal that NCNP effectively hinders the diffusion of uranyl ions (UO2 2+) to the NCN surface, thereby inhibiting electron transfer reactions. This is primarily achieved by the PEI layer, which repels UO2 2+ and prevents its direct contact with the NCN surface. Water-soluble O2 can still diffuse to the NCN surface for reduction reactions, ensuring the reduction performance of NCNP. The introduction of PEI enhances the proton affinity of the material. Under acidic conditions, protons (H+) bind with PEI, reducing competition between protons and uranyl ions for adsorption on the NCN surface. Under alkaline conditions, protons detach from PEI, facilitating H2O2 generation and promoting uranium extraction. This dynamic proton regulation allows NCNP to perform effectively under varying pH conditions. Experimental results show that NCNP achieves a uranium extraction capacity of 498.7 mg g-1 in uranium-spiked simulated seawater, which is significantly higher than that of unmodified carbon nitride (CN), which is one of the highest performances for simulating seawater uranium extraction.

Regulating the surface chemistry of covalent organic frameworks for enhancement cationic dye removal and identification

Simultaneous removal and identification of trace-level cationic dye pollutants from water is both important and challenging owing to their highly polar and complex sample matrices. In this study, three covalent organic frameworks (COFs) were synthesized using 2, 4, 6-triformylphloroglucinol with ethidium bromide (EB) containing positively charged groups, 3, 5-diaminobenzoic acid (DABA) containing negatively charged groups, and p-phenylenediamine (Pa) lacking charged groups. These were named EB-COFs, TpPa-1, and DP-COFs, respectively, and were employed as adsorbents for the extraction and identification of cationic dyes. The adsorption performance of the three COFs toward methylene blue (MB) and crystal violet (CV) was investigated. By incorporating carboxyl groups into DP-COFs, the surface chemistry of the adsorbent was effectively tailored, enabling complete exploitation of selective cationic sites. This facilitated dynamic interactions with cationic dyes through multiple adsorption mechanisms, including electrostatic, π-π, and H-bonding interactions. DP-COFs exhibited high adsorption capacities for MB and CV, achieving 383 and 326 mg g-1, respectively. The adsorption behavior was further analyzed using adsorption isothermals, kinetics, and thermodynamics. Moreover, DP-COFs were employed as a matrix in laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF MS) to adsorb and directly identify both cationic dyes without the need for an elution process. This approach demonstrated high sensitivity, high reproducibility, low background interference, and excellent salt tolerance. The limits of detection for MB and CV were 0.12 and 0.04 ng mL-1, respectively, representing improvements of 166-fold and 225-fold compared with using DP-COFs solely as a matrix. Recovery rates of both dyes in spiked industrial wastewater and lake water samples ranged from 81.4 to111.1% with RSDs of 1.9-6.3%. These results highlight the high reliability of the proposed method.

Two-Dimensional Silver-Isocyanide Frameworks

Metal-organic frameworks (MOFs) have been widely studied due to their versatile applications and easily tunable structures. However, heteroatom-metal coordination dominates the MOFs community, and the rational synthesis of carbon-metal coordination-based MOFs remains a significant challenge. Herein, two-dimensional (2D) MOFs based on silver-carbon linkages are synthesized through the coordination between silver(I) salt and isocyanide-based monomers at ambient condition. The as-synthesized 2D MOFs possess well-defined crystalline structures and a staggered AB stacking mode. Most interestingly, these 2D MOFs, without π-π stacking between layers, exhibit narrow band gaps down to 1.42 eV. As electrochemical catalysts for converting CO2 to CO, such 2D MOFs demonstrate Faradaic efficiency over 92 %. Surprisingly, the CO2 reduction catalyzed by these MOFs indicates favorable adsorption of CO2 and *COOH on the active carbon sites of the isocyanide groups rather than on silver sites. This is attributed to the critical σ donor role of isocyanides and the corresponding ligand-to-metal charge-transfer effect. This work not only paves the way toward a new family of MOFs based on metal-isocyanide coordination but also offers a rare platform for understanding the electrocatalysis processes on strongly polarized carbon species.

Light-Promoted Extraction of Precious Metals Using a Porphyrin-Integrated One-Dimensional Covalent Organic Framework

Precious metals are valuable materials for the chemical industry, but they are scarce and pose a risk of supply disruption. Recycling precious metals from waste is a promising strategy, here we tactfully utilize light irradiation as an environmental-friendly and energy-saving adjunctive strategy to promote the reduction of precious metal ions, thereby improving the adsorption capacity and kinetics. A newly light-sensitive covalent organic framework (PP-COF) was synthesized to illustrate the effectiveness and feasibility of this light auxiliary strategy. The equilibrium adsorption capacities of PP-COF with light irradiation towards gold, platinum, and silver ions are 4729, 573, and 519 mg g-1, which are 3.3, 1.9, and 1.2 times the adsorption capacities under dark condition. Significantly, a filtration column with PP-COF can recover more than 99.8 % of the gold ions in the simulated e-waste leachates with light irradiation, and 1 gram of PP-COF can recover gold from up to 0.15 tonne of e-waste leachates. Interestingly, the captured precious metals by PP-COF with light irradiation mainly exist in the micron-sized particles, which can be easily separated by extraction. We believe this work can contribute to precious metal recovery and circular economy for recycling resources.

Isomeric Covalent Organic Frameworks for High-Efficiency Photocatalytic CO2 Reduction: Substituent Position Effect

The exploration of covalent organic frameworks (COFs) for high-efficiency photocatalytic CO2 reduction is urgently demanded. Herein, COF-based catalysts are constructed for the selective photoreduction of CO2 to CO via delicately designed isomeric monomers with substituent at the 4,5,9,10- positions (K) or 1,3,6,8-positions (A) of pyrene knots. The distinct substituted regions significantly affect the planarity of pyrene knots, resulting in COFs with different microstructures and photocatalytic activities. While employing a 5 W LED white-light as the light source, the single atomic Co contained A-Py-Bpy-COF-Co showcased a moderate CO evolution rate of 2174.4 µmol g-1 h-1. In sharp contrast, K-Py-Bpy-COF-Co reveals a considerable CO photo-reduction rate of 12 476.4 µmol g-1 h-1 (5.7 times higher than A-Py-Bpy-COF) with a selectivity up to 93.3%. Remarkably, the excellent photocatalytic activity of K-Py-Bpy-COF-Co can be maintained for at least 5 cycles without obvious decay. The distinct photocatalytic properties of the two isomeric COFs can be attributed to the larger steric-hindrance of K-Py-4CHO which enlarges the interlayer distances to inhibit exciton quenching and electron-richer nature of monatomic Co in K-Py-Bpy-COF-Co. This work provides a new protocol to explore COFs with boosted photocatalytic performance via isomeric design from refined modulation of reported COFs.

Constructing perfluorinated UiO-67 for enrichment of polycyclic aromatic hydrocarbons in seawater and seabed sediments

To investigate the ocean contamination caused by polycyclic aromatic hydrocarbons (PAHs), UiO-67/perfluorooctanoic acid (UiO-67/PFOA) was synthesized through solvent-assisted ligand incorporation method. The UiO-67/PFOA was then served as an adsorbent in headspace solid-phase microextraction (HS-SPME) technology for collecting and concentrating trace PAHs. The addition of the PFOA improved the hydrophobicity and stability of the UiO-67/PFOA coating, and the C-F functional group in UiO-67/PFOA could form the pseudo hydrogen bonding with the CH on the benzene ring of PAHs, which endowed the UiO-67/PFOA with 1.60-4.63 times enrichment performance for PAHs than UiO-67. Under optimal conditions, the wide linear ranges of PAHs (0.01-20 ng·mL-1) with good coefficients of determination (R2 ≥ 0.9950) and low limits of detection (LODs, 0.003-0.008 ng·mL-1) were obtained. The recoveries of five PAHs from spiked seawater and seabed sediment by the developed method ranged from 81.14 % to 116.0 % with satisfactory results. This work provided a good adsorbent for the enrichment of trace PAHs in complicated environments and a new approach for the subsequent synthesis of adsorbents with good enrichment performance.

Dissolution-Recrystallization: A Novel Mechanism for Fluorochromic Detection of Th4+ Using Color-Tunable Luminescent Metal-Organic Frameworks

Thorium, a predominant actinide in the Earth's crust, presents significant environmental and health risks due to its radioactive nature. These risks are particularly pronounced during the mining and processing of monazite for rare earth elements (REEs), which contain substantial thorium concentrations. Current instrumental analysis methods for thorium, offer high accuracy but require laborious sample preparations and expensive instruments, making them unsuitable for on-site analysis. Herein, we present a class of color-tunable luminescent lanthanide-based metal-organic frameworks (Ln-MOFs) as fluorochromic sensors for Th4+ cations. Utilizing a heterobimetallic Eu3+/Tb3+ doping strategy, the luminescence colors of EuxTb1-x-BDC-OH can be finely tuned from red, to orange, and to green. More intriguingly, the higher Lewis acidity of Th4+ facilitates the transformation of EuxTb1-x-BDC-OH into a UiO-type Th-MOF via a dissolution-recrystallization mechanism. This process results in a gradual reduction of characteristic Ln3+ emissions and the emergence of blue color ligand-based fluorescence, thereby leading to selective fluorochromic responses with increasing Th4+ concentrations and enabling visible detection of Th4+ cations. Additionally, a custom-built portable optoelectronic device is fabricated, which directly converts luminescence colors into red-green-blue (RGB) values. This device enables easy quantification of Th4+ concentrations without the need for complex instrumentation.

Fine-Tuning 2D Heterogeneous Channels for Charge-Lock Enhanced Lithium Separation from Brine

The extraction of lithium (Li) from complex brines presents significant challenges due to the interference of competing ions, particularly magnesium (Mg2⁺), which complicates the selective separation process. Herein, a strategy is introduced employing charge-lock enhanced 2D heterogeneous channels for the rapid and selective uptake of Li⁺. This approach integrates porous ZnFe2O4/ZnO nanosheets into Ag+-modulated sub-nanometer interlayer channels, forming channels optimized for Li⁺ extraction. The novelty lies in the charge-lock mechanism, which selectively captures Mg2⁺ ions, thereby facilitating the effective separation of Li from Mg. This mechanism is driven by a charge transfer during the formation of ZnFe2O4/ZnO, rendering O atoms in Fe-O bonds more negatively charged. These negative charges strongly interact with the high charge density of Mg2⁺ ions, enabling the charge-locking mechanism and the targeted capture of Mg2⁺. Optimization with Ag⁺ further improves interlayer spacing, increasing ion transport rates and addressing the swelling issue typical of 2D membranes. The resultant membrane showcases high water flux (44.37 L m⁻2 h⁻¹ bar⁻¹) and an impressive 99.8% rejection of Mg2⁺ in real brine conditions, achieving a Li⁺/Mg2⁺ selectivity of 59.3, surpassing existing brine separation membranes. Additionally, this membrane demonstrates superior cyclic stability, highlighting its high potential for industrial applications.

Co2+ coordination-assisted molecularly imprinted covalent organic framework for selective extraction of ochratoxin A

Covalent organic frameworks (COFs) are attractive materials for sample pretreatment due to their tunable structures and functions. However, the precise recognition of contaminant in complex environmental matrices by COFs remains challenging owing to their insufficient specific active sites. Herein, we report Co2+ coordination-assisted molecularly imprinted flexible COF (MI-COF@Co2+) for selective recognition of ochratoxin A (OTA). The MI-COF@Co2+ was prepared via one-step polymerization of 3,3-dihydroxybenzidine, 2,4,6-tris(4-formylphenoxy)- 1,3,5-triazine, Co2+ and template. The flexible units endowed COFs with the self-adaptable ability to regulate the molecular conformation and coordinate with Co2+ to locate the imprinted cavities. The coordination interaction greatly improved the adsorption capacity and selectivity of MI-COF@Co2+ for OTA. The prepared MI-COF@Co2+ was used as solid phase extraction adsorbent for high-performance liquid chromatography determination of OTA with the detection limit of 0.03 ng mL-1 and the relative standard deviation of < 2.5 %. In addition, this method permitted interference-free determination of OTA in real samples with recovery from 89.5 % to 102.8 %. This work provides a simple way to improve the selectivity of COFs for the determination of hazardous compounds in complex environments.

Efficient Capture and Release of the Rare-Earth Element Neodymium in Aqueous Solution by Recyclable Covalent Organic Frameworks

Rare-earth elements (REEs) are present in a broad range of critical materials. The development of solid adsorbents for REE capture could enable the cost-effective recycling of REE-containing magnets and electronics. In this context, covalent organic frameworks (COFs) are promising candidates for REE adsorption due to their exceptionally high surface area. Despite having attractive physical properties, COFs are heavily underutilized for REE capture applications due to their limited lifecycle in aqueous acidic environments, as well as synthetic challenges associated with the incorporation of ligands suitable for REE capture. Here, we show how the Ugi multicomponent reaction can be leveraged to postsynthetically modify imine-based COFs for the introduction of a diglycolic acid (DGA) moiety, an efficient scaffold for REE capture. The adsorption capacity of the DGA-functionalized COF was found to be more than 40 times higher than that of the pristine imine COF precursor and more than four times higher than that of the next-best reported DGA-functionalized solid support. This rationally designed COF has appealing characteristics of high adsorption capacity, fast and efficient capture and release of the REE ions, and reliable recyclability, making it one of the most promising adsorbents for solid-liquid REE ion extractions reported to date.

Ionic Covalent Organic Frameworks in Adsorption and Catalysis

The ion extraction and electro/photo catalysis are promising methods to address environmental and energy issues. Covalent organic frameworks (COFs) are a class of promising template to construct absorbents and catalysts because of their stable frameworks, high surface areas, controllable pore environments, and well-defined catalytic sites. Among them, ionic COFs as unique class of crystalline porous materials, with charges in the frameworks or along the pore walls, have shown different properties and resulting performance in these applications with those from charge-neutral COFs. In this review, current research progress based on the ionic COFs for ion extraction and energy conversion, including cationic/anionic materials and electro/photo catalysis is reviewed in terms of the synthesis strategy, modification methods, mechanisms of adsorption and catalysis, as well as applications. Finally, we demonstrated the current challenges and future development of ionic COFs in design strategies and applications.

Constructing ordered and tunable extrinsic porosity in covalent organic frameworks via water-mediated soft-template strategy

As one of the most attractive methods for the synthesis of ordered hierarchically porous crystalline materials, the soft-template method has not appeared in covalent organic frameworks (COFs) due to the incompatibility of surfactant self-assembly and guided crystallization process of COF precursors in the organic phase. Herein, we connect the soft templates to the COF backbone through ionic bonds, avoiding their crystallization incompatibilities, thus introducing an additional ordered arrangement of soft templates into the anionic microporous COFs. The ion exchange method is used to remove the templates while maintaining the high crystallinity of COFs, resulting in the construction of COFs with ordered hierarchically micropores/mesopores, herein named OHMMCOFs (OHMMCOF-1 and OHMMCOF-2). OHMMCOFs exhibit significantly enhanced functional group accessibility and faster mass transfer rate. The extrinsic porosity can be adjusted by changing the template length, concentration, and ratio. Cationic guanidine-based COFs (OHMMCOF-3) are also constructed using the same method, which verifies the scalability of the soft-template strategy. This work provides a path for constructing ordered and tunable extrinsic porosity in COFs with greatly improved mass transfer efficiency and functional group accessibility.

Efficient removal of per/polyfluoroalkyl substances from water using recyclable chitosan-coated covalent organic frameworks: Experimental and theoretical methods

Covalent organic frameworks (COFs) demonstrate remarkable potential for adsorbing per/polyfluoroalkyl substances (PFAS). Nevertheless, the challenge of recycling powdered COFs hampers their practical application in water treatment. In this research, a quaternary amine COF with inherent positive surface charge was synthesised to adsorb perfluorooctanoic acid (PFOA) via electrostatic interactions. The COF was then combined with chitosan (CS) through a simple dissolution-evaporation process, resulting in a composite gel material termed COF@CS. The findings indicated that the adsorption capacity of COF@CS significantly surpassed that of the original COF and CS. According to the Langmuir model, COF@CS achieved a maximum PFOA capacity of 2.8 mmol g-1 at pH 5. Furthermore, the adsorption rate increased significantly to 6.2 mmol g-1 h-1, compared to 5.9 mmol g-1 h-1 for COF and 3.4 mmol g-1 h-1 for CS. Notably, COF@CS exhibited excellent removal efficacy for ten other types of PFAS. Moreover, COF@CS could be successfully regenerated using a mixture of 70% ethanol and 1 wt% NaCl, and it exhibited stable reusability for up to five cycles. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) characterisation, and theoretical calculations revealed that the quaternary amine functional group in COF served as the primary adsorption site in the composite gel material, while the protonated amino group on CS enhanced PFOA adsorption through electrostatic interaction. This study highlights the significant practical potential of COF@CS in the removal of PFAS from aqueous solution and environmental remediation.

3D Crown Ether Covalent Organic Framework as Interphase Layer toward High-Performance Lithium Metal Batteries

The practical application of lithium (Li) metal batteries is inhibited by accumulative Li dendrites and continuous active Li consumption during cycling, which results in a low Coulombic efficiency and short lifetime. Constructing artificial solid-electrolyte interphase (SEI) layer in Li anode, such as 2D covalent organic frameworks (COFs), is an effective strategy to restrain the formation of Li dendrites and improve cycling performance. However, the exploration of 3D COFs as protecting layers is rarely reported, because of the preconception that the interconnect pores in 3D COFs eventually cause Li dendrites in disordered direction. 3D crown ether-based COF with ffc topology as interphase layer, in which the crown ether units are arranged in parallel and vertical orientation along the electrode, is demonstrated. The strong coupling effect between the crown ether and Li+ accelerates Li+ diffusion kinetics and enables homogeneous Li+ flux, resulting in a high Li+ transference number of 0.85 and smooth Li deposition in 3D direction. Li/COF-Cu cells display a lower Li-nucleation overpotential (17.4 mV) and high average Coulombic efficiency of ≈98.6% during 340 cycles with COF incorporation. This work gives a new insight into designing COFs for energy storage systems.

Ionic liquid post-modified carboxylate-rich MOFs for efficient catalytic CO2 cycloaddition under solvent-free conditions

The synthesis of cyclic carbonates through cycloaddition reactions between epoxides and carbon dioxide (CO2) is an important industrial process. Metal-Organic Frameworks (MOFs) have functional and ordered pore structures, making them attractive catalysts for converting gas molecules into valuable products. One approach to enhance the catalytic activity of MOFs in CO2 cycloaddition reactions is to create open metal sites within MOFs. In this study, the amino-functionalized rare earth Gd-MOF (Gd-TPTC-NH2) and its ionic liquid composite catalysts (Gd-TPTC-NH-[BMIM]Br) were synthesized using 2'-amino-[1,1':4',1''-terphenyl]-3,3'',5,5''-tetracarboxylic acid (H4TPTC-NH2) as the ligand. The catalytic performance of these two catalysts was observed in the cycloaddition reaction of CO2 and epoxides. Under the optimized reaction conditions, Gd-TPTC-NH-[BMIM]Br can effectively catalyze the cycloaddition reaction of a variety of epoxide substrates with good to excellent yields of cyclic carbonate products. Comparatively, epichlorohydrin and epibromohydrin, which possess halogen substituents, promote higher yields of cyclic carbonates due to the electron-withdrawing nature of Cl and Br substituents. Additionally, the Gd-TPTC-NH-[BMIM]Br catalyst demonstrated good recyclability and reproducibility, maintaining its catalytic activity without any changes in its structure or properties after five reuse cycles.

Branched-Chain-Induced Host-Guest Assembly in Covalent-Organic Frameworks for Efficient Separation of No-Carrier-Added 177Lu

No-carrier-added (NCA) 177Lu is one of the most interesting nuclides for endoradiotherapy. With the dramatically rapid development of radiopharmaceutical and nuclear medicine, there is a sharp increase in the radionuclide supply of NCA 177Lu, which has formed a great challenge to current radiochemical separation constituted on classical materials. Hence, it is of vital importance to design and prepare new functional materials able of recovering 177Lu from an irradiated target with excellent efficacy. In this work, we proposed to apply noncovalent interactions to regulate the porous properties of covalent organic frameworks (COFs) by tuning the branched chain, rendering related covalent hosts different encapsulation abilities toward a flexible guest, 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (P507). More interestingly, we found that the noncovalent interaction has a great effect on the host-guest complexes, which can achieve efficient NCA 177Lu separation with high recovery (95.97%). A systematic mechanism combined with experimental and theoretical investigations has confirmed that the noncovalent interactions between COFs and P507 play a preeminent role in adjusting the macroscopic properties of the host-guest complexes. This work not only uncovers that noncovalent interactions can affect the basic properties of covalent organic bonded materials but also provides a strategy for the design and preparation of other new moieties with specific functionalities.

Modulating Skeletons of Covalent Organic Framework for High-Efficiency Gold Recovery

Covalent organic frameworks (COFs) have attracted considerable attention as adsorbents for capturing and separating gold from electronic wastes. To enhance the binding capture efficiency, constructing hydrogen-bond nanotraps along the pore walls was one of the most widely adopted approaches. However, the development of absorbing skeletons was ignored due to the weak binding ability of the gold salts (Au). Herein, we demonstrated skeleton engineering to construct highly efficiently absorbs for Au capture. The strong electronic donating feature of diarylamine units enhanced the electronic density of binding sites (imine-linkage) and thus resulted in high capacities over 1750 mg g-1 for all three COFs. Moreover, the absorbing performance was further improved via the ionization of diarylamine units. The ionic COF achieved 90 % of the maximal adsorption capacity, 1.63 times of that from the charge-neutral COF within ten minutes, and showed remarkable uptakes of 1834 mg g-1 , exceptional selectivity (97.45 %) and cycling stability. The theoretical calculation revealed the binding sites altering from imine bonds to ionic amine sites after ionization of the frameworks, which enabled to bind the AuCl4 - via coulomb force and contributed to enhanced absorbing kinetics. This work inspires us to design molecular/ionic capture based on COFs.

Water-Mediated Hydrogen Bond Network Drives Highly Crystalline Structure Formation of Crown Ether-Based Covalent Organic Framework for Sr Adsorption

Covalent organic frameworks (COFs) with crown ether units have drawn great attention due to their potential applications in adsorption, catalysis, and sensing. However, employing crown ethers to construct COFs is still challenging in light of the flexible nature of macrocycles. Here, a highly crystalline one-dimensional covalent organic framework (1D-18C6-COF) with crown ether units on the ribbon edge was synthesized. The water-mediated hydrogen bond network and π-π stacking hold the 1D COF ribbons together. The combination of experimental and DFT studies demonstrated that the hydrogen bond network plays a crucial role in the structure crystallinity. The 1D-18C6-COF was applied as an adsorbent for strontium, and it exhibited rapid kinetics with good selectivity. In the competitive adsorption experiment, a separation factor of 1900 was achieved, representing one of the largest values for cesium/strontium separation. This work provides new insights into the design and functional exploration of crystalline COFs with flexible units.

Selective capture of palladium from acid wastewater by thiazole-modified activated carbon: Performance and mechanism

As a kind of scarce metal, palladium is widely used in many chemical industries. It essential to recover palladium from secondary resources, especially acidic media, owing to high content of palladium in secondary wastes and widespread extraction of palladium via strong acids. Chemically modified carbon materials not only have the advantage of activated carbon but also achieve the precise removal of specific pollutants, which is a kind of adsorption material with broad application prospects. In this direction, we report a solid carbon material named AT-C, which is obtained by one-step synthesis of 2-aminothiazoles grafted to the carbon surface by amidation. The present adsorbent delivers a high palladium adsorption capacity of 178.9 mg g-1, and desirable thermal and chemical stability. The uniform presence of abundant sulfur atoms and CO in the porous network enables AT-C to achieve selective absorption and rapid adsorption kinetics of Pd2+ in the complex water mixture containing many competing ions in the acidic pH range. For the strongly acidic leachates of catalysts, AT-C exhibits outstanding stability in cyclic experiments. Meanwhile, the fixed-bed column test indicates that 1076 bed volumes of the feeding streams can be effectively treated. In addition, AT-C exhibits superior adsorption selectivity, and the recovery efficiency of Pd2+ in actual industrial wastewater is 96.6%. This work realizes an efficient, rapid, and selective removal of palladium under acidic conditions, and provides a reference for complex industrial water treatment and resource recovery of precious metals.